The outer glass on my Moto G cracked recently, and I was wondering if there's a way to replace only the glass. The digitizer/lcd is working just fine.
neillalwani said:
The outer glass on my Moto G cracked recently, and I was wondering if there's a way to replace only the glass. The digitizer/lcd is working just fine.
Click to expand...
Click to collapse
Hey Bro!
My Moto g is happened the same thing... All places that I see for replace the glass, say that not possible to replace just the glass, Cause has one glue and they won't replace them. Here, to replace the lcd/Digitalizer cost like a 150 Dollars.
Cheers Man! :highfive:
There's a few tutorials on youtube for that. You can get the parts on ebay..
I noticed that replacing just the glass screen is a bit of a hassle because its glued on the screen panel and the broken glass has to be heated to get it off. After that, you have to remove the glue stains with a solvent. This is perhaps the reason local shops dont do that. It's too much labor. I would only try it for myself if I wouldn't care too much about breaking the phone or learn from the process.
Although a glass screen replacement with a lcd panel is a bit more expensive, I would recommend it for easier replacement if you are new to disassembling a phone. Its around 40 bucks on ebay. Or buy the screen and digitizer and ask a local phone repair man to do it for you.
I use a tempered glass screen protector to avoid this kind of problems. Just a couple of bucks saves you allot of time and money..
Related
So my daughter just cracked the screen on my skyrocket, anyone know a reputable place to buy a replacement LCD screen? Or is anyone looking to sell one just pm me.
Ebay. And keep your daughter away from it. Lol
Sent from my SAMSUNG-SGH-I997 using XDA App
Man, screw eBay. I just looked and the lowest one was $650. You can get the whle new phone for $650 at Best Buy.
-Carlos
These guys might be able to do it, http://mobiletechvideos.mybigcommerce.com/
How did she break the Gorilla Glass ?!
the gorilla glass in the skyrocket is bad, you can find some videos about it in youtube
I ordered a new screen for $164 and replaced it myself. It's pretty easy to do
Sent from my SAMSUNG-SGH-I727 using XDA App
play1962 said:
I ordered a new screen for $164 and replaced it myself. It's pretty easy to do
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Sweet! Glad you got it fixed. I'll take that over warranty costs any day. Where did you get the screen from?
Got it from gounlock.com
Sent from my SAMSUNG-SGH-I727 using XDA App
its not gorilla glass is how she broke it...No where on Samsungs site or Cornings site do they say the skyrocket has it, and in fact i have contacted both and have gotten this response via email from samsung
“Thank you for your inquiry.
The Samsung Skyrocket (SGH-I727) does not feature the Gorilla glass. However, we assure you that all the components of the phone passed the Samsung quality assurance test and have been tested to withstand multiple different conditions”
So, Im hearing some people post on forums that the Digitizer is glued to the Glass and is separable, meaning the repair will cost way less than paying for a whole new digitizer + LCD + Glass assembly.
Can anyone confirm or deny this?
I have a nasty spider web break on my phone but can not afford to pay $160 when I paid $150 for the phone! (I know thats the contract price)
I'm a broke college student!
raheelanwar89 said:
So, Im hearing some people post on forums that the Digitizer is glued to the Glass and is separable, meaning the repair will cost way less than paying for a whole new digitizer + LCD + Glass assembly.
Can anyone confirm or deny this?
I have a nasty spider web break on my phone but can not afford to pay $160 when I paid $150 for the phone! (I know thats the contract price)
I'm a broke college student!
Click to expand...
Click to collapse
I don't think you can separate them and manage to reuse the circuitry, were talking less 1mm thick. I've replaced glass before, next time I'll probably send it to Sammy.
xiLLeNtz said:
How did she break the Gorilla Glass ?!
Click to expand...
Click to collapse
Is confirmed by Samsung there is no gorilla glass on the skyrocket!
Sky Ice Cream RC 7.3 Speed!!
I just dropped and broke the screen on my phone, how hard was it to replace the screen yourself?
r3dp0is0n2012 said:
Is confirmed by Samsung there is no gorilla glass on the skyrocket!
Sky Ice Cream RC 7.3 Speed!!
Click to expand...
Click to collapse
This has been known for quite some time now
amlwaycooljr said:
I just dropped and broke the screen on my phone, how hard was it to replace the screen yourself?
Click to expand...
Click to collapse
Replacing the glass is not too difficult if you know your way around computer hardware. What makes it a pain is how small all the connections and ribbon cable clasps are and ect.
Here's a link to a video tutorial on the Atrix to give you an idea of what you can expect. About an hour to replace.
amlwaycooljr said:
I just dropped and broke the screen on my phone, how hard was it to replace the screen yourself?
Click to expand...
Click to collapse
I got a used S2 skyrocket off ebay. Only the outer glass is cracked.
I saw this video: http://www.youtube.com/watch?v=mtiyU-RQUU0
Has anyone tried such a method and only changed the glass? (outer glass is cheap on ebay). Thx
gcretro said:
I got a used S2 skyrocket off ebay. Only the outer glass is cracked.
I saw this video: http://www.youtube.com/watch?v=mtiyU-RQUU0
Has anyone tried such a method and only changed the glass? (outer glass is cheap on ebay). Thx
Click to expand...
Click to collapse
Tried and failed... That is a nice video, but my understanding is that the Galaxy S II and III are different for repairs. The III you can replace just the top glass, but with the II it's easiest to replace the whole LCD and digitizer + glass. HTCs on the other hand have the top glass and digitizer as one replaceable unit.
I had this idea I could get the LCD lifted up and then use fishing line like floss to separate the glass and digitizer. But I didn't get that far. I didn't have enough heat and trying to remove the LCD, it busted. The OLED is like a brittle film and the adhesive used is crazy, so that method was doomed. I think if I had a different approach things might have gone better.
Now I have a worthless disassembled phone waiting on the prices of the whole LCD to come back down to sane levels. They were like $121,$131,$155, last check they're $200 on eBay. Makes me want to cuss!
I saw a video on YouTube where the top glass was busted open, not just cracked. I think it was a plain Galaxy S II. They used playing cards to dig in between the glass and digitizer layers. Then you clean off the digitizer and tape your new clean glass down and it would be fixed. I think if you could further break the top glass to pry it up and be able to dig in between the glass and the digitizer, that's how I would try to replace just the glass.
Ok, I dug in my web history and found the video I remembered: http://www.youtube.com/watch?v=judy-izOmKk
So in the video they had their screen/digitizer/glass removed from their phone chassis. I wouldn't go that far fearing you'd break the LCD. You may not have to do more than removing the battery before you get started.
Another thing the Skyrocket top glass needs this double sided clear tape. I presume this is because the digitizer is separate from the top glass and needs to be connected right to the glass instead of just held on with the double sided tape on the edges alone. I imagine that that could work if you pressed extra hard on your touches, but I don't know. I found this tape from EtradeSupply.com - they have a Youtube video I watched over and over. But shipping to the states is $15, adding to the expense.
Hope this helps anybody.
me too
I did the same thing. I got the old glass seperated with a hair dryer, but messed up some of the amoled screen and the glass was never fully flush after the reglue.
Super Annoying. :/ ending up buying the new screen kit on ebay for like 120. :/
Repair Follow-up
Yeah, I was able to get a new housing and screen assembly for my Skyrocket and all is well now. My phone is like new.
I did find some newer repair videos that use the playing card trick for removing just the cracked glass.
Samsung nexus glass repair i9250 part 1 - YouTube
Samsung nexus glass repair i9250 part 2 - YouTube
Samsung Nexus glass replacement follow up - YouTube
The quick version is that he says stick the phone in the freezer for a couple of minutes, because that will weaken the digitizer glue/tape. Then use your card to dig the glue out, pushing it out of the edge of the glass in a slow, lengthy process. He had success this way on a similar phone. I read elsewhere that Goo Gone cleaner could be used to remove any adhesive residue from the digitizer.
One thing I would worry about with this process is air bubbles in the new digitizer tape, since this other video has an industrial vacuum pressure machine as part of the final assembly process of the screens.
LCD and Digitizer touch the production workshop/Enterprise Solutions - YouTube
Related is an issue of dust, since a spec of lint or dust will cause an air bubble, as I just discovered applying a screen protector onto my Skyrocket.
So this little "$15" repair can add up with the digitizer adhesive and buying the Goo Gone and rubber gloves (which I didn't even use) and all of the rest. Just going for the new display comparatively is easy.
I just want a new glass. My digitizer works perfect so anyway I can just get the glass? I don't wanna spend 200 bucks for a screen and a digitizer. I just want a new glass. Is it possible?
I haven't seen them separately. Not sure though
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I haven't seen just the class but you could buy one with a fried digitizer and then just use a heat gun to remove the glass.
Eating Kitty's in my Skyrocket fueled by CM9
I sent mine in to Samsung and they replaced the glass/digitizer for $145.00
I suspect they sent me a whole new phone tho.
Found just the glass on ebay for $20
Ok, so I found the glass only as well but am not sure if that can be replaced without buying a digitizer too. I have a couple deep scratches but nothing is cracked. I just want to replace the glass. Can this be done? Is it glued to the digitizer? I have not been able to find a "How to" showing just replacing the glass.
Thanks for any info.
techspy said:
Ok, so I found the glass only as well but am not sure if that can be replaced without buying a digitizer too. I have a couple deep scratches but nothing is cracked. I just want to replace the glass. Can this be done? Is it glued to the digitizer? I have not been able to find a "How to" showing just replacing the glass.
Thanks for any info.
Click to expand...
Click to collapse
I replaced with $15 glass from ebay. I used a hair dryer. The whole glass is glued to the display, so it took several hours. Maybe a heat gun would work better. I also chipped a polarized sheet that was between the display and the glass. Touch screen still works, but not as well as it did because of the slight space between screen and glass, if I squeeze it down again and turn the screen off and back on it works fine for a little. Probably would use better glue or something next time.
Is it possible to buy a cheap digitizer without the lcd screen?
My Moto G fell face down and it has a very small crack, like a little eye lash hair, i want to be safe and buy a new digitizer maybe the old one will break at some point if it falls again, i have to be careful that it doesnt happen again.
KuGeL94 said:
Is it possible to buy a cheap digitizer without the lcd screen?
My Moto G fell face down and it has a very small crack, like a little eye lash hair, i want to be safe and buy a new digitizer maybe the old one will break at some point if it falls again, i have to be careful that it doesnt happen again.
Click to expand...
Click to collapse
For the moment there are only full assembly, even on the Chinese sites.
Motorola's service partners got them, but it's the original thing and it costs more than 60 bucks.
I got your point, but rather leave it as it is for the time being. In a few months probably there will be dragontail covered ones fur about 15-20 bucks.
They cost like $110 thats a lot for a phone that costs only $200.
Well the crack (scratch) is barely visible, but it bugs me that I know its there, have to settle with it for 1-2 years and be extra careful, gotta get a new case and a screen protector, until i get a backup phone or a new one
KuGeL94 said:
Well the crack (scratch) is barely visible, but it bugs me that I know its there, have to settle with it for 1-2 years and be extra careful, gotta get a new case and a screen protector, until i get a backup phone or a new one
Click to expand...
Click to collapse
Putting a decent screen protector on, may help a bit.Also cracks in most gorilla glass does not propagate so easy after the initial cracking. It will probably stay like it is atm for quite a while.
The glass and the LCD are fused. Unless you have a lot of experience with the same situation, you will be wasting money and would be better off just buying the whole front assembly, which isn't that much more.
Sent from my Moto G XT1028
I dropped my nexus 5 getting out if the car and now the glass screen is shattered at a corner. The digitizer seems fin and every where on the screen is responsive.
So I was wondering if there were a place i can order just the LCD screen and without the digitizer/housing.
Sent from my Nexus 5 using Tapatalk
The digitizer and LCD are fused together.. You need to replace them both!
If I were you, I would send it to a LG Service outlet and let them replace it. The ones you order online may or may not work + you need to do everything yourself. However, if you're good at it, then ordering online will certainly save you few bucks!
As the phone is only $350. Spending anything more then $150 won't do it for me as I'd rather buy a new or used phone. I was hoping there was a place to get just the glass part.
Sent from my Nexus 5 using Tapatalk
The only way that makes sense is if you can get a phone that is as good or better than the n5 for $150 or less.
I dropped mine, three days after it was delivered, no case as it had not yet arrived
The corner of the case was dented and the screen shattered but still fully useabIe.
I was wary about knock off spare parts and my skill with glue and tape if I went DIY so I sent mine in to LG service centre. The cost was £114.67 including Special delivery both ways ( Insured, tracked, next day delivery).
The worst part was the waiting, it took them 10 days to give me an estimate of he cost and three more days to get it back to me. It is good as new now and still has warranty.
I've just checked, thats about $190! So I uderstand your dilemma.
B
LReyes66 said:
I dropped my nexus 5 getting out if the car and now the glass screen is shattered at a corner. The digitizer seems fin and every where on the screen is responsive.
So I was wondering if there were a place i can order just the LCD screen and without the digitizer/housing.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This is Elena from parts4repair.com,we can offer only oem glass for you,(the original one is out of stock now),and I am a new user,so i can't offer the link for you,maybe you will be interested to visit our website,or contact with us by [email protected].
Please notice that:the outer glass lens is without any function of digitizer or display. and only glass replacement is a professional job, and special tools are required, too. By the way, glass and the screen are bonded together, so both separating them and gluing them together are difficult job. Please sure you can do it before order.
Hope can help you,Thanks.
Never try to replace just the glass. You'd need loca glue & a uv light to cure it. The glue could get into other components and totally ruin your phone. And even if by a small chance you can pull it off, it will never be 100 percent. Always replace the whole assembly. - coming from somebody who has tried to replace just the glass.
Lokke9191 said:
Never try to replace just the glass. You'd need loca glue & a uv light to cure it. The glue could get into other components and totally ruin your phone. And even if by a small chance you can pull it off, it will never be 100 percent. Always replace the whole assembly. - coming from somebody who has tried to replace just the glass.
Click to expand...
Click to collapse
you are right,it is very hard to get it done right by people who mostly have no experience,so please think twice before do it if it is first time for you to change it.And we also can offer LG N5 D820 a full screen assembly(front housing cover + digitizer + lcd screen+glass).
I used my old front housing and removed the old LCD and Glass. It was very difficult but it came out working 100%. This has been the 3rd display I have fixed and so far the most difficult. The rest of the parts were really easy though. Just separating the LCD and housing was painstakingly time consuming and dangerous.
Sent from my Nexus 5 using Tapatalk
Hello XDA,
My T-Mobile Nexus 5 fell out of my pocket and landed straight on it's face, shattering the screen. It still works, I still use it, but the screen will now need to be replaced.
I am very handy and can do this job myself - if the cost is reasonable. My question is, do I need just the screen which is just $5.95 for a "Black LG Google Nexus 5 D820 D821 Front Screen Glass Lens Replacement Part" on eBay or do I need the whole digitizer assembly, which is $99+ on eBay. I hope it is the former since the screen is still responsive to touch.
Look at your phone closely. Is it just front mirror that's broken? Digitizer screen is behind the front screen. I would post some pictures to see how bad it is.
I would disassemble it and see if it's broken to if you have an extra phone you can use until you get your parts
You should be able to just replace the "front" glass. But I'll pick up something of about 20/30$. I think 6$ is definitly too poor to be a good glass..
Charlus97 said:
You should be able to just replace the "front" glass. But I'll pick up something of about 20/30$. I think 6$ is definitly too poor to be a good glass..
Click to expand...
Click to collapse
There's no way anyone is replacing just the glass and not having a horrible deformed or otherwise irregular phone after gluing or taping it back together again.
Short answer: You need at least the glass + digitizer. Preferably the frame as well to make it easier on yourself.
bblzd said:
There's no way anyone is replacing just the glass and not having a horrible deformed or otherwise irregular phone after gluing or taping it back together again.
Short answer: You need at least the glass + digitizer. Preferably the frame as well to make it easier on yourself.
Click to expand...
Click to collapse
^this. And don't buy the non oem one for 99 bucks. It will be garbage in so many possible ways. Pay the 150 dollars and send it to lg. Replacing the glass only is not easy at all either research loca glue and you'll see. Or read my other posts on why not to do screen repairs yourself with a n5. Trust me pay lg to fix it, you'll save time, headaches, and money.