Hi guys!
First of all thank you for reading.
I'm probably in my 3rd day lurking around every possible forum and thread looking for an answer to my similar problem but have yet to find one.
I used to have a sensation xe but I kinda smashed the digitizer to bits. before that the was battery swollen and the back case pretty damaged (it survived a 120 kph gps reading of an rc car before going end over end across a parking lot). Meanwhile I got an Htc One, which is superb and I kinda forgot about the old gal.
A few days back I found a guy selling a sensation for spares (the mobo was fried on his) so I just bought that (for 20 euros) and figured all I needed to to was a mobo transplant and then have a nice almost new sensation.
But obviously the digitizer is not calibrated. I found the forum with the tutorial on that but it requires super CID and Soff. Cannot do either of them.
Since the mobo has been replaced the devunlock didn't work. Cannot, for the love of me succeed with the junopunutbear soff with the wire trick. Tried it on a ubuntu live cd, all goes well up until the wire trick. On a side note, I design and build 3d printers for a living, I might be a noob in the android department but that's about it. Even tried an automatic timed relay to do the two wire taps and still nothing. Obviously, it's not working on windows, I found the kgs1992 tool which requires a version of controlbear for windows which I cannot find (found one but it doesn't recognise it when I put it in the tools folder).
tl;dr
Cannot devunlock, cannot soff, nothing. Could I possibly try changing the IMEI so that i can maybe just maybe devunlock it first? I tried putting the mobo back in the old phone, still powered up but didn't recognize the token. I'm pretty much stuck right now.
Any help would be highly appreciated and if you read the whole thing, kudos to you for standing my chatter !
i sent you a pm
also you can follow this guide which avoids wire trick
http://forum.xda-developers.com/showthread.php?t=2751187
rzr86 said:
i sent you a pm
also you can follow this guide which avoids wire trick
http://forum.xda-developers.com/showthread.php?t=2751187
Click to expand...
Click to collapse
Hi mate!
Thank you so much for your reply!
Unfortunately, rumrunnes told me to f myself lol, an error about not finding an unsecure kernel I guess, too frustrated to remember what the error was after finally finding a piece of software which seemed to do something.
Will try with the link you sent me and will come back with results!
elktw said:
Hi mate!
Thank you so much for your reply!
Unfortunately, rumrunnes told me to f myself lol, an error about not finding an unsecure kernel I guess, too frustrated to remember what the error was after finally finding a piece of software which seemed to do something.
Will try with the link you sent me and will come back with results!
Click to expand...
Click to collapse
did it tell you to be rooted first?
rzr86 said:
did it tell you to be rooted first?
Click to expand...
Click to collapse
That it did, but I was under the assumption (well all the guides I read) that you need to be devunlocked in order to root it. which I can't do. Am I missing something or is this a vicious circle ?
elktw said:
That it did, but I was under the assumption (well all the guides I read) that you need to be devunlocked in order to root it. which I can't do. Am I missing something or is this a vicious circle ?
Click to expand...
Click to collapse
just use the temproot.bat file from juopunutbear thread
then run rumrunner again
it is mentioning also in rumrunner thread
Stuck on confirm Unlock bootloader
Ok, my phone got really messed up with TWRP format bug.
Since then, I have tried RUU, different recoveries and finally got stuck with Relocked, S-ON, no ROM, no ADB on my Sensation.
When i try to unlock via Unlock_code.bit i used earlier i am able to send it via fastboot to phone where it prompts me for a choice Yes/No.
And here is funny part.
I can select No with my power button which reboots my phone and shows white screen with bootloader after it since there is nothing on it.
But, when i press Volume up and select Yes option and Power button to confirm it, nothing happens. Actually it freezes phone and i have nothing else left to do except pulling out battery and booting to bootloader.
Since it is some kind of alive, I'm sure there is some way to revive it but I guess I'm kinda not seeing right steps to unlock it, s-off again, and custom recovery and wait for twrp team or shantur to find a sollution to fix corrupted partitions.
Can you help me with unlocking?
What logs do you need?
culler said:
Ok, my phone got really messed up with TWRP format bug.
Since then, I have tried RUU, different recoveries and finally got stuck with Relocked, S-ON, no ROM, no ADB on my Sensation.
When i try to unlock via Unlock_code.bit i used earlier i am able to send it via fastboot to phone where it prompts me for a choice Yes/No.
And here is funny part.
I can select No with my power button which reboots my phone and shows white screen with bootloader after it since there is nothing on it.
But, when i press Volume up and select Yes option and Power button to confirm it, nothing happens. Actually it freezes phone and i have nothing else left to do except pulling out battery and booting to bootloader.
Since it is some kind of alive, I'm sure there is some way to revive it but I guess I'm kinda not seeing right steps to unlock it, s-off again, and custom recovery and wait for twrp team or shantur to find a sollution to fix corrupted partitions.
Can you help me with unlocking?
What logs do you need?
Click to expand...
Click to collapse
Well, i can certainly try and tell you what I did. Basically listen to the wonderful advice of @rzr86. Assuming you have tried many tools, you probably have the temproot utility. I just used that and Rumrunners, no wire trick no nothing, those were pretty straightforward and I finally managed to soff and supercid it. Afterwards I just installed 4ext recovery and was finally able to install whatever custom rom I wanted.
My problem however is now a different one. Cannot calibrate the touchscreen using the 58diag file. I'm using cgmod11 and if I run the calibration file, it gets stuck in bootloader. Standard RUU and it does nothing at all for the touchscreen. I'm pretty much stuck and out of ideas.
Aaaanyway, try rumrunners with temproot and get back to me with the results !
elktw said:
Well, i can certainly try and tell you what I did. Basically listen to the wonderful advice of @rzr86. Assuming you have tried many tools, you probably have the temproot utility. I just used that and Rumrunners, no wire trick no nothing, those were pretty straightforward and I finally managed to soff and supercid it. Afterwards I just installed 4ext recovery and was finally able to install whatever custom rom I wanted.
My problem however is now a different one. Cannot calibrate the touchscreen using the 58diag file. I'm using cgmod11 and if I run the calibration file, it gets stuck in bootloader. Standard RUU and it does nothing at all for the touchscreen. I'm pretty much stuck and out of ideas.
Aaaanyway, try rumrunners with temproot and get back to me with the results !
Click to expand...
Click to collapse
Did you had access to rom and adb to run Rumrunners utility? I have only access to bootloader and when i try to run it it hangs waiting for ADB.
Also, I'm stuck on unlock bootloader screen so probably have corrupted memory because I can't unlock it. :/
culler said:
Did you had access to rom and adb to run Rumrunners utility? I have only access to bootloader and when i try to run it it hangs waiting for ADB.
Also, I'm stuck on unlock bootloader screen so probably have corrupted memory because I can't unlock it. :/
Click to expand...
Click to collapse
do you have adb/fastboot installed?
did you enable usb debugging mode from settings?
use usb 2.0 ports not 3.0
also what windows OS do you have?
rzr86 said:
do you have adb/fastboot installed?
did you enable usb debugging mode from settings?
use usb 2.0 ports not 3.0
also what windows OS do you have?
Click to expand...
Click to collapse
I'm on Windows 8.1 64-bit, but also tried Windows 7 32-bit and Ubuntu 13.04 both 32 and 64bit.
I also tried both USB2.0 and USB3.0 ports.
Like i said, I cant enable USB debugging mode in settings since i don't have ROM now, device is empty, except bootloader without recovery and I can't find way to install since I'm Relocked and S-on.
culler said:
I'm on Windows 8.1 64-bit, but also tried Windows 7 32-bit and Ubuntu 13.04 both 32 and 64bit.
I also tried both USB2.0 and USB3.0 ports.
Like i said, I cant enable USB debugging mode in settings since i don't have ROM now, device is empty, except bootloader without recovery and I can't find way to install since I'm Relocked and S-on.
Click to expand...
Click to collapse
S-OFF requires a working rom so you can't use S-OFF method
with windows 8.1 you will face connectivity issues
type in search box how to set up adb/fastboot in windows 8 but the point is that you don't have enabled usb debugging mode
so i am not sure if you will have any success
by the way what version of TWRP did you flash?
the latest? (2.7.0)
I was using TWRP 2.7.0.0 which corrupted my partitions so i tried various recoveries to fix the situation without success.
So I tried to RUU and it also failed.
Somewhere along the way of trying to revive my phone, i used fastboot oem lock and now i somehow have S-ON device which is RELOCKED and I have no custom recovery. I can't even access HTC recovery now.
When i try fastboot flash unlocktoken Unlock_code.bin from HTCDev it prompts me with screen to choose YES to unlock or NO to unlock.
When i choose YES with Volume button and press Power button to confirm, device freezes and stays like that forever, or until I remove battery.
Selecting no reboots device and brings me back to bootloader.
*** RELOCKED ***
*** Security Warning ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Mar 2 2012,18:14:34
culler said:
I was using TWRP 2.7.0.0 which corrupted my partitions so i tried various recoveries to fix the situation without success.
So I tried to RUU and it also failed.
Somewhere along the way of trying to revive my phone, i used fastboot oem lock and now i somehow have S-ON device which is RELOCKED and I have no custom recovery. I can't even access HTC recovery now.
When i try fastboot flash unlocktoken Unlock_code.bin from HTCDev it prompts me with screen to choose YES to unlock or NO to unlock.
When i choose YES with Volume button and press Power button to confirm, device freezes and stays like that forever, or until I remove battery.
Selecting no reboots device and brings me back to bootloader.
*** RELOCKED ***
*** Security Warning ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Mar 2 2012,18:14:34
Click to expand...
Click to collapse
i thibk you are stuck mate unfortunately
did you try unbricking project or jtag method?
rzr86 said:
i thibk you are stuck mate unfortunately
did you try unbricking project or jtag method?
Click to expand...
Click to collapse
I tried unbricking project but it hangs on start with connecting to device or waiting for device.
As I understood, it needs to access ADB which i cant succeed.
I dont have JTAG equipment so it goes to some service to see if they could repair it.
It's such a great device, i don't want to lose it so soon
Related
Hi the girlfriend has well and truely messed up her phone so any help anyone could give would help.
Ok first off she has a htc sensation hboot 1.27 not sure if it's gb or ics but it's 3.32 so would expect it to be ics.
Is stuck s-on not rooted and had USB disabled before the issue started.
Ok the thing is its stuck at the hboot screen I can get to fastboot (USB and ac). But that's as far as it goes.
It's a stock Vodafone rom and is CID locked to uk voda.
I can't access it with adb believe me I've tried or controlbear.
I have located the correct ruu to try and reflash the phone but I get error 170 or 171 USB errors.
So I tried extracting the rom and loading it via the sd which it finds checks and then goes back to the hboot screen without any
Error message so I'm stumped as to what to do now.
Thanks in advance if anyone can help
paradox1985 said:
Hi the girlfriend has well and truely messed up her phone so any help anyone could give would help.
Ok first off she has a htc sensation hboot 1.27 not sure if it's gb or ics but it's 3.32 so would expect it to be ics.
Is stuck s-on not rooted and had USB disabled before the issue started.
Ok the thing is its stuck at the hboot screen I can get to fastboot (USB and ac). But that's as far as it goes.
It's a stock Vodafone rom and is CID locked to uk voda.
I can't access it with adb believe me I've tried or controlbear.
I have located the correct ruu to try and reflash the phone but I get error 170 or 171 USB errors.
So I tried extracting the rom and loading it via the sd which it finds checks and then goes back to the hboot screen without any
Error message so I'm stumped as to what to do now.
Thanks in advance if anyone can help
Click to expand...
Click to collapse
Hi,
Try following THIS GUIDE
malybru said:
Hi,
Try following THIS GUIDE
Click to expand...
Click to collapse
Already tried but adb won't find the device ive tried using it on both linx and windows both fresh installs so no driver conflicts. I will point out that controlbear can reboot the phone but can't root into it. I'm stumped. Thanks anyway
paradox1985 said:
Already tried but adb won't find the device ive tried using it on both linx and windows both fresh installs so no driver conflicts. I will point out that controlbear can reboot the phone but can't root into it. I'm stumped. Thanks anyway
Click to expand...
Click to collapse
no ..read the guide again ..the process doesn't require ADB ..you just need fastboot ..so read it again .try the method ..if you still facing problems come back here
ganeshp said:
no ..read the guide again ..the process doesn't require ADB ..you just need fastboot ..so read it again .try the method ..if you still facing problems come back here
Click to expand...
Click to collapse
No joy with fastboot either. Every time it tries to write anything it fails. I'm losing the will to live with this phone. May just buy her another one
paradox1985 said:
No joy with fastboot either. Every time it tries to write anything it fails. I'm losing the will to live with this phone. May just buy her another one
Click to expand...
Click to collapse
give me ..the exact error you are getting i can guess the reason better
as for the fails ..i assume it is "REMOTE NOT ALLOWED" ..which happens because you have LOCKED bootloader and thus you need to unlock the bootloader first
Stil no joy can't get the unlock.bin to take. Will continue to fidle with it but have bought her a st27i for now to keep the lady happy lol
ok ive uploaded the unlock token recieved my unlock bin used fastboot flash unlocktoken Unlock_code.bin. and all is fine the pc side but im not getting any disclaimer coming up asking if i accept and thus it isnt unlocking
paradox1985 said:
ok ive uploaded the unlock token recieved my unlock bin used fastboot flash unlocktoken Unlock_code.bin. and all is fine the pc side but im not getting any disclaimer coming up asking if i accept and thus it isnt unlocking
Click to expand...
Click to collapse
Try using this tool.
I was having problems with the other guides but this worked straight away:
http://kgs1992.com/redirect?linker=tool
A little foreshadow. I attempted to install the jellybean update on a rooted ATT phone. I ended up getting sent to the TWRT (?) screen on the install. I was silly and decided to clear the system... Which erased my OS completely.
For a while I was able to get to the TWRT(?) screen where I could mount my sd card, etc. While researching the problem I came across this:
a solution of fastbooting a recovery.img
I ran the fastboot recovery.img. The only problem is the only screen I can now access is the bootloader. I have bootloader 1.14.0002 loaded onto my phone if that helps.
Is there anyway to try to get a operating system or flash a rom onto this phone still or is it bricked for good? Also if I was able to put a rom onto it, what do you sugggest?
When I try to go to Recovery or Factory Reset, I get the HTC screen with the red text underneath it and it never goes any further.
Evita PVT Ship S-ON RL
HBOOT-1.14.0002
Radio-0.19as 32.09.11_2
OpenDSP-V29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
That is the information listed in my bootloader as of now. I am not showing it listed as a drive in my computer when connected to USB. Also when I 'power off' I am in a reset cycle that doesn't stop.
I really appreciate any help in advance. This was a big wake up call to myself about how I should be a lot more careful when messing with these things.
Thank you to everyone that answers!
http://forum.xda-developers.com/showthread.php?p=38909732
[Public Service Announcement] Read before installing the AT&T Jellybean OTA or RUU
You might be hosed. Can you get into bootloader?
Sent from my One X using xda premium
Read before doing anything. Such a simple task. It's easy to read, it's hard to come back from a brick.
Sent from my One XL using XDA Premium
You are not bricked, you are not even close to bricked... If you are already rooted, get the official jellybean update of your head. Clear your thoughts and lock it away. There are tons of custom jellybean ROMs available, a couple based on atts JB update... Flash one of those. If you can get to bootloader you're fine. If you can still access twrp, even better... Which version of twrp do you have IF you can still access? We'll start with that. If not You'll have to fastboot a recovery. 2.3.3.0 is your safest bet, I think the community will agree this is one of the most stable versions for our device.. Just in case you have to push it, download from here onto your computer. http://goo.im/devs/OpenRecovery/evita/openrecovery-twrp-2.3.3.0-evita.img
Now drop that image file into your adb/fastboot folder. Right click your adb/fastboot folder and open a command prompt from there. Shoot this command.
Fastboot flash recovery openrecovery-twrp-2.3.3.0-evita.img
Now from bootloader choose to boot into recovery. Awwww yea now we on to something!
Now you can download the rom of choice onto your computer. Since you opted for official JB, take a look at Scotts CleanRom. It uses ATT firmware as base :thumbup: once downloaded, double click the zip file (rom) it'll show contents, and youll see a boot.img. simply drop the boot.img into your fastboot/adb folder.
Now on your phone. Choose "mount" in recovery. Make sure it mounts and shows files on your computer. From here drag the entire rom zip (cleanrom) onto your SD card. Now "unmount" hell yea we getting close. I can feel it!
Back out and choose "install" find cleanrom.zip, and swipe to flash. F*ckin rite, this is what android is all about.
Once its completed, DO NOT REBOOT SYSTEM. Since your s-on and have 1.14 hboot, you'll have to fastboot the boot.img you put in your adb folder. Choose to boot into bootloader! Make sure once again it says fastboot usb
Fire up command prompt inside that folder.
Shoot the command ---> fastboot flash boot boot.img
Sending.......
Okay....
Finished.....
OMG success!!! Some people will say to ---> fastboot erase cache
I don't necessarily do this, but it definitely won't hurt. Now reboot system and enjoy Scotts hard work. They don't calls his ROMs the most stable ROMs on the planet for nothing
Sent from my One X using Tapatalk 2
Not only does fastboot erase cache not take long it avoids many stupid little issues. I would say it's a must when flashing a new recovery.
Sent from my One X using xda app-developers app
sinkthehalffoot said:
I attempted to install the jellybean update on a rooted ATT phone. I ended up getting sent to the TWRT (?) screen on the install.
Click to expand...
Click to collapse
The reason it went to recovery is very simple. The OTA needs to have stock recovery in order to install. You don't have stock recovery on your phone anymore, you have custom recovery (TWRP). So the OTA stalled there, when it didn't find stock recovery.
sinkthehalffoot said:
I was silly and decided to clear the system... Which erased my OS completely.
Click to expand...
Click to collapse
Of course it did, what were you expecting to happen? Wiping the OS is the very definition of what happens when you wipe system. If you didn't know what wiping system would do, you shouldn't have done it. For that matter, you shouldn't be doing anything on your phone if you don't know what its for.
A lot of this points to a fundamental lack of reading and understanding:
- Don't know the name of the custom recovery installed on the system
- Wiping things without knowing what they are
- Basic rule (that many folks here seem to ignore, for reasons unknown): Don't install any OTA on a rooted device without first researching what will happen
Lack of basic understanding which spells almost certain doom when modding smartphones. I would highly suggest a few solid hours of research before messing with your phone anymore. I'm not saying this to be a jerk. I'm saying it so you don't brick your phone.
You aren't bricked. With very few exceptions (and this isn't one of those) if the screen turns on, and you can get into hboot, the phone is recoverable. And probably fairly easily so, with the right steps. But you need to do some homework before proceeding.
redpoint73 said:
Lack of basic understanding which spells almost certain doom when modding smartphones. I would highly suggest a few solid hours of research before messing with your phone anymore. I'm not saying this to be a jerk. I'm saying it so you don't brick your phone.
Click to expand...
Click to collapse
+1000
This is exactly the kind of situation that occurs when people get in over their heads and start blundering around.
http://forum.xda-developers.com/showthread.php?t=2232141
InflatedTitan said:
You are not bricked, you are not even close to bricked... If you are already rooted, get the official jellybean update of your head. Clear your thoughts and lock it away. There are tons of custom jellybean ROMs available, a couple based on atts JB update... Flash one of those. If you can get to bootloader you're fine. If you can still access twrp, even better... Which version of twrp do you have IF you can still access? We'll start with that. If not You'll have to fastboot a recovery. 2.3.3.0 is your safest bet, I think the community will agree this is one of the most stable versions for our device.. Just in case you have to push it, download from here onto your computer.
Now drop that image file into your adb/fastboot folder. Right click your adb/fastboot folder and open a command prompt from there. Shoot this command.
Fastboot flash recovery openrecovery-twrp-2.3.3.0-evita.img
Now from bootloader choose to boot into recovery. Awwww yea now we on to something!
Now you can download the rom of choice onto your computer. Since you opted for official JB, take a look at Scotts CleanRom. It uses ATT firmware as base :thumbup: once downloaded, double click the zip file (rom) it'll show contents, and youll see a boot.img. simply drop the boot.img into your fastboot/adb folder.
Now on your phone. Choose "mount" in recovery. Make sure it mounts and shows files on your computer. From here drag the entire rom zip (cleanrom) onto your SD card. Now "unmount" hell yea we getting close. I can feel it!
Back out and choose "install" find cleanrom.zip, and swipe to flash. F*ckin rite, this is what android is all about.
Once its completed, DO NOT REBOOT SYSTEM. Since your s-on and have 1.14 hboot, you'll have to fastboot the boot.img you put in your adb folder. Choose to boot into bootloader! Make sure once again it says fastboot usb
Fire up command prompt inside that folder.
Shoot the command ---> fastboot flash boot boot.img
Sending.......
Okay....
Finished.....
OMG success!!! Some people will say to ---> fastboot erase cache
I don't necessarily do this, but it definitely won't hurt. Now reboot system and enjoy Scotts hard work. They don't calls his ROMs the most stable ROMs on the planet for nothing
Sent from my One X using Tapatalk 2
Click to expand...
Click to collapse
In case anyone ends up stumbling here with a similar issue, this solution worked to a 'T'. Thank you again InflatedTitan.
To everyone else, yes I know, I should of read more than I had. I saw the jellybean update and have been wanting it for a while and acted with haste. I learned a valuable lesson from it all.
Lol this "solution" was around before you posted. You just didn't read or search enough.
Sent from my One X using xda app-developers app
F**kin right! That's what android is all about. Hahaha!
Sent from my HTC One X using xda premium
Venomtester said:
F**kin right! That's what android is all about. Hahaha!
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Lol :beer:
Sent from my HTC One X using xda app-developers app
Venomtester said:
F**kin right! That's what android is all about. Hahaha!
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Its almost like a high every time I slide to flash lol
Sent from my HTC One XL using Tapatalk 2
InflatedTitan said:
Its almost like a high every time I slide to flash lol
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
I thought I was the only one. In fact I just rooted a nook tablet and installed twrp. Slides to flash... And I could swear I was on cloud 9.
But bravo on the explanation sir. Love a good write up. Even though i already know it, feels good to read it.
Sent from my Carbon-ize Evita using xda-developers app
[HELP] Not sure if bricked or hardware issue?
I know this is my first post, but I really need the help.
(Also, I'm sorry if this is a bit long)
I've have searched the HOX Evita and Android Q&A forums countless time in the past 3 days trying to figure this out. This thread and this one: "http://forum.xda-developers.com/showthread.php?t=2156665&highlight=fastboot+usb+hangs", are the most similar to what I think is happening to my phone.
Just a little background:
- Bought a used HTC One X, but has a cracked digitizer which I'll be replacing this weekend. (Not sure if this is causing the problems, could it?)
- I was told that the OS was still stock, but I know that's not true now.
- During the first 12 hours I used it, I had no problems.
- Then while I was playing music it rebooted and went to the HTC boot up screen with the red text. Stopped then rebooted again to the normal HTC boot up screen but just hanged there and vibrated nonstop.
- I then used the power button to force a shut down and haven't been able to use it since then.
Here's where I'm at now:
- I'm able to get to the bootloader screen sometimes with the VOL DOWN+PWR method, but most of the time it goes to the QHSUSB mode.
- When I can get to the bootloader, I try to get to Fastboot or Recovery mode but once I press the power button it just stops and does nothing.
- The few times I have gotten into fastboot, and plug in an USB cable, it hangs.
- So far I have NOT gotten it to show "FASTBOOT USB" therefore I haven't been able to use a RUU or flash a boot.img.
- I have reinstalled the drivers almost 5 times now, and tried with different sources from here and HTC Sync. And also tried with 3 different cables and USB ports on my laptop. But still no signs of a connection with my laptop.
- And at one time I (before I knew I shouldn't have) I did try to Factory Reset from the bootloader, but nothing happened. I hope that won't become my downfall.
But yeah, sorry again for the long post, just trying to be thorough. If anyone has an idea of what I can do, please I need your help. It really doesn't matter to me whether my HOX goes back to stock, or use a ROM like CleanROM 6, as long as I can use it again.
Also here's the info at the bootloader screen.
***TAMPERED***
***LOCKED***
Evita PVT Ship S-ON RL
HBOOT-1.14.0002
Radio-0.19as 32.09.11_2
OpenDSP-V29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
pharrjw said:
I know this is my first post, but I really need the help.
(Also, I'm sorry if this is a bit long)
I've have searched the HOX Evita and Android Q&A forums countless time in the past 3 days trying to figure this out. This thread and this one: "http://forum.xda-developers.com/showthread.php?t=2156665&highlight=fastboot+usb+hangs", are the most similar to what I think is happening to my phone.
Just a little background:
- Bought a used HTC One X, but has a cracked digitizer which I'll be replacing this weekend. (Not sure if this is causing the problems, could it?)
- I was told that the OS was still stock, but I know that's not true now.
- During the first 12 hours I used it, I had no problems.
- Then while I was playing music it rebooted and went to the HTC boot up screen with the red text. Stopped then rebooted again to the normal HTC boot up screen but just hanged there and vibrated nonstop.
- I then used the power button to force a shut down and haven't been able to use it since then.
Here's where I'm at now:
- I'm able to get to the bootloader screen sometimes with the VOL DOWN+PWR method, but most of the time it goes to the QHSUSB mode.
- When I can get to the bootloader, I try to get to Fastboot or Recovery mode but once I press the power button it just stops and does nothing.
- The few times I have gotten into fastboot, and plug in an USB cable, it hangs.
- So far I have NOT gotten it to show "FASTBOOT USB" therefore I haven't been able to use a RUU or flash a boot.img.
- I have reinstalled the drivers almost 5 times now, and tried with different sources from here and HTC Sync. And also tried with 3 different cables and USB ports on my laptop. But still no signs of a connection with my laptop.
- And at one time I (before I knew I shouldn't have) I did try to Factory Reset from the bootloader, but nothing happened. I hope that won't become my downfall.
But yeah, sorry again for the long post, just trying to be thorough. If anyone has an idea of what I can do, please I need your help. It really doesn't matter to me whether my HOX goes back to stock, or use a ROM like CleanROM 6, as long as I can use it again.
Also here's the info at the bootloader screen.
***TAMPERED***
***LOCKED***
Evita PVT Ship S-ON RL
HBOOT-1.14.0002
Radio-0.19as 32.09.11_2
OpenDSP-V29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
Click to expand...
Click to collapse
You will have to get a proper fastboot connection before you can do anything. Then unlock the bootloader then you can flash a recovery on there. Is this an AT&T phone?
exad said:
You will have to get a proper fastboot connection before you can do anything. Then unlock the bootloader then you can flash a recovery on there. Is this an AT&T phone?
Click to expand...
Click to collapse
Thanks for the reply. Yes, it is an AT&T phone. I understand that I need a fastboot connection, I'm just having difficulties timing it. Is it normally this difficult to get a FASTBOOT USB connection? Or is there something else that I could be missing, or any other method?
I have thought about booting Windows XP on my laptop from a flash drive then trying to connect from that. Does XP have a better record when it comes to unlocking and flashing with android?
If you did a factory reset from bootloader your sd is corrupted. When you can get into the bootloader what does it do if you click on recovery?
Sent from my HTC One X using xda app-developers app
pharrjw said:
Thanks for the reply. Yes, it is an AT&T phone. I understand that I need a fastboot connection, I'm just having difficulties timing it. Is it normally this difficult to get a FASTBOOT USB connection? Or is there something else that I could be missing, or any other method?
I have thought about booting Windows XP on my laptop from a flash drive then trying to connect from that. Does XP have a better record when it comes to unlocking and flashing with android?
Click to expand...
Click to collapse
There's nothing to time. Drivers and fastboot/adb are all you need. HTC Sync can get in the way so kill or uninstall it if it's running. When you boot to Bootloader, select fastboot, plug in the phone, if you have the the drivers it should go into fastboot USB. I have seen people having issues before due to something interfering with the HTC drivers but it's not common. You can try creating a VM for a clean environment with less chance of anything interfering.
Thanks again for the replies guys.
31ken31 said:
If you did a factory reset from bootloader your sd is corrupted. When you can get into the bootloader what does it do if you click on recovery?
Click to expand...
Click to collapse
I was just able to get back into Bootloader, and tried to go into recovery, but with no luck. It just hangs at the bootloader screen. :
EDIT: Not sure if relevant, but after that it eventually shut down, and when I checked it in the Device Manager it appeared again as QHSUSB-DLOAD.
exad said:
There's nothing to time. Drivers and fastboot/adb are all you need. HTC Sync can get in the way so kill or uninstall it if it's running. When you boot to Bootloader, select fastboot, plug in the phone, if you have the the drivers it should go into fastboot USB. I have seen people having issues before due to something interfering with the HTC drivers but it's not common. You can try creating a VM for a clean environment with less chance of anything interfering.
Click to expand...
Click to collapse
I'm gonna try it again with HTC Sync uninstalled. But if I get the same results I'll probably will endup creating a VM, and hopefully get better results.
I would also like to add that when I do try to get to the bootloader I get various results. Sometimes it goes into QHSUSB like I said in my first post. Then sometimes just nothing but a blank screen and the LED light blinking like the battery is low, or it's solid as if it is charging even though my HOX isn't plugged in to anything. That's what I was referring to when I said I was having difficulties timing it.
pharrjw said:
Thanks again for the replies guys.
I was just able to get back into Bootloader, and tried to go into recovery, but with no luck. It just hangs at the bootloader screen. :
EDIT: Not sure if relevant, but after that it eventually shut down, and when I checked it in the Device Manager it appeared again as QHSUSB-DLOAD.
I'm gonna try it again with HTC Sync uninstalled. But if I get the same results I'll probably will endup creating a VM, and hopefully get better results.
I would also like to add that when I do try to get to the bootloader I get various results. Sometimes it goes into QHSUSB like I said in my first post. Then sometimes just nothing but a blank screen and the LED light blinking like the battery is low, or it's solid as if it is charging even though my HOX isn't plugged in to anything. That's what I was referring to when I said I was having difficulties timing it.
Click to expand...
Click to collapse
factory reset in bootloader corrupts the SD card. We wont worry about that just yet as there's nothing we can do about it until we can get recovery on there.
You're going to have to be very careful because it sounds like your EMMC partitions might have some issues. if you can get it to bootlaoder KEEP IT AT THAT SCREEN. don't power it off or anything, leave it there. Because one wrong move could be a perma brick. If we can get a rom on there to S-OFF with, we can RUU to restore your emmc partitions.
I've researched and researched, now I need help. I have an HTC Inspire 4G that crashed. Never rooted, never unlocked, I think something just went wrong and a critical OS file or two got corrupted. So I brought out my old Aria and am using that :crying: while I try to figure out how to restore my Inspire 4G.
I'm a programmer but never felt the need to root my phone. It was fine as is. Now I am willing to do what it takes to get this back. I scoured the internet and found out a lot, piecemeal and by accident. Here's what I have learned, found and done so far:
I know how to boot into the Bootloader. I tried Factory Reset to no avail. It simply boots to the HTC screen and sits there.
I've installed the Android SDK and have researched the ADB and FASTBOOT commands.
I have installed the Windows 7 64-bit drivers onto my Win8 64-bit PC. They seem to be installed correctly - the device shows up in the Device Manager when I connect the phone via USB - although I have to connect it first, then Reboot Bootloader, at which point it appears in Device Manager as INSPIRONWIN8\Android USB Devices\My HTC.
I've unlocked my phone using instructions from HTCDev.com. I have the Unlock_code.bin file for my phone.
I have the actual AT&T ROM for this phone in EXE form. I've run it successfully twice with the phone attached(I relocked first), but each time when I reboot the phone just freezes on the HTC screen or cycles between that and the AT&T startup animation.
I've also mounted the SD card into my computer, formatted it with FAT32 and put PD98IMG.zip on it. There's another DIAG file the phone complains about not finding -I've searched the net and I can't find it either. I go into recovery and try to reload the ROM from that (Apply update from SD Card) but that has not succeeded either. Formatting the cached, etc.... none of that has worked.
I am trying to run the ADB command on the phone but it cannot find the device. I was thinking I'd try to push the ROM to the phone that way, but so far no luck. The USB Universal Driver does not work at all, so I'm back to the Win7 64-bit driver.
Does anyone have any other suggestions? Maybe I have all the steps but haven't done them in the right order?
Any help, guidance or suggestions would be appreciated, thanks.
Barry
bimplebean said:
I've researched and researched, now I need help. I have an HTC Inspire 4G that crashed. Never rooted, never unlocked, I think something just went wrong and a critical OS file or two got corrupted. So I brought out my old Aria and am using that :crying: while I try to figure out how to restore my Inspire 4G.
I'm a programmer but never felt the need to root my phone. It was fine as is. Now I am willing to do what it takes to get this back. I scoured the internet and found out a lot, piecemeal and by accident. Here's what I have learned, found and done so far:
I know how to boot into the Bootloader. I tried Factory Reset to no avail. It simply boots to the HTC screen and sits there.
I've installed the Android SDK and have researched the ADB and FASTBOOT commands.
I have installed the Windows 7 64-bit drivers onto my Win8 64-bit PC. They seem to be installed correctly - the device shows up in the Device Manager when I connect the phone via USB - although I have to connect it first, then Reboot Bootloader, at which point it appears in Device Manager as INSPIRONWIN8\Android USB Devices\My HTC.
I've unlocked my phone using instructions from HTCDev.com. I have the Unlock_code.bin file for my phone.
I have the actual AT&T ROM for this phone in EXE form. I've run it successfully twice with the phone attached(I relocked first), but each time when I reboot the phone just freezes on the HTC screen or cycles between that and the AT&T startup animation.
I've also mounted the SD card into my computer, formatted it with FAT32 and put PD98IMG.zip on it. There's another DIAG file the phone complains about not finding -I've searched the net and I can't find it either. I go into recovery and try to reload the ROM from that (Apply update from SD Card) but that has not succeeded either. Formatting the cached, etc.... none of that has worked.
I am trying to run the ADB command on the phone but it cannot find the device. I was thinking I'd try to push the ROM to the phone that way, but so far no luck. The USB Universal Driver does not work at all, so I'm back to the Win7 64-bit driver.
Does anyone have any other suggestions? Maybe I have all the steps but haven't done them in the right order?
Any help, guidance or suggestions would be appreciated, thanks.
Barry
Click to expand...
Click to collapse
Barry, if you ran the RUU successfully and the phone got stuck in the splash screen (white one), that seems to be a fried emmc chip. That is quite usual in Ace devices (DHD / Inspire 4G).
glevitan said:
Barry, if you ran the RUU successfully and the phone got stuck in the splash screen (white one), that seems to be a fried emmc chip. That is quite usual in Ace devices (DHD / Inspire 4G).
Click to expand...
Click to collapse
Actually, I was able to flash the original 2.3.3 ROM last night using Fastboot. It took me a while to realize that since the OS was fried, ADB was useless - there was no 'android' to 'debug.' Consequently I used fastboot.exe to re-apply the PD98IMG.zip and it worked!
The old ROM is real smooth, so I may just keep it, but if I can figure out how to apply a newer build I will.
Thanks!
bimplebean said:
Actually, I was able to flash the original 2.3.3 ROM last night using Fastboot. It took me a while to realize that since the OS was fried, ADB was useless - there was no 'android' to 'debug.' Consequently I used fastboot.exe to re-apply the PD98IMG.zip and it worked!
The old ROM is real smooth, so I may just keep it, but if I can figure out how to apply a newer build I will.
Thanks!
Click to expand...
Click to collapse
you can run the RUU exe file from fastboot usb
glevitan said:
you can run the RUU exe file from fastboot usb
Click to expand...
Click to collapse
It's an EXE. How do I run that from fastboot?
bimplebean said:
It's an EXE. How do I run that from fastboot?
Click to expand...
Click to collapse
Just run the exe file with the phone plugged and in fastboot usb. That is how RUU's work
glevitan said:
Just run the exe file with the phone plugged and in fastboot usb. That is how RUU's work
Click to expand...
Click to collapse
Ah. Yes, I already did that, no luck. See above.
But never mind, as I said above I was able to flash the original 2.3.3. ROM using fastboot and it's working now. Everything else from here on out is just gravy.:laugh:
bimplebean said:
Ah. Yes, I already did that, no luck. See above.
But never mind, as I said above I was able to flash the original 2.3.3. ROM using fastboot and it's working now. Everything else from here on out is just gravy.:laugh:
Click to expand...
Click to collapse
That is weird...RUU should be working if your phones works fine. Anyway, if you are cool in this state, just let it be. :good:
glevitan said:
That is weird...RUU should be working if your phones works fine. Anyway, if you are cool in this state, just let it be. :good:
Click to expand...
Click to collapse
I REALLY should have taken your advice, but I fiddle around a bit and hosed the recovery loader.
I restored the phone again but it runs very slow and processes fail all the time. I can't run the RUU because it won't boot into the bootloader.
How do i restore the stock bootloader?
bimplebean said:
I REALLY should have taken your advice, but I fiddle around a bit and hosed the recovery loader.
I restored the phone again but it runs very slow and processes fail all the time. I can't run the RUU because it won't boot into the bootloader.
How do i restore the stock bootloader?
Click to expand...
Click to collapse
There is no "recovery loader," just "recovery" and "bootloader." Which doesn't work? What did you do exactly when you "fiddled" with it?
bananagranola said:
There is no "recovery loader," just "recovery" and "bootloader." Which doesn't work? What did you do exactly when you "fiddled" with it?
Click to expand...
Click to collapse
I apologize, this is not my strong suit. I've been through so many things I'm not sure I remember all the things I've tried. I think I tried flash the recovery with Ace Hack Kit.
Let me describe what I DO know.
I can boot in to Fastboot (Vol Down + Power)
Here's what it says:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011, 00:55:45
There is no LOCKED or UNLOCKED indicator at all.
I'd he happy with an RUU stock ROM, but when I try to re-run the RUU from my computer, the system tries to reboot the phone into the bootloader. This is when I get the HTC screen and it just sits there. The RUU program reports a connection error.
I have several ZIP files, one for the Froyo image, one for the Gingerbread one, they're supposed to be for this phone.
I tried to reload the Gingerbread one from the SD card (I renamed it update.zip) but it failed. I booted into fastboot, then selected Recovery. While I had the green symbol I waited...after a bit it went to HTC screen and froze.
Tried again - this time when I had the green symbol I pressed vol up + power and got to the recovery options.Here's what I see
formatting / data
can't open /data/cwpkg.zip
can't open /data/cw.prop
can't open /cache/cwpkg.zip
can't open /cache/cw.prop
formatting /cache.....
Then I get the blue list of options. I select apply update from SDCard...
-- Invalid Operation ---
Then it reboots into the HTC screen and stays there.
Suggestions?
would love a copy of your file...
bimplebean said:
Actually, I was able to flash the original 2.3.3 ROM last night using Fastboot. It took me a while to realize that since the OS was fried, ADB was useless - there was no 'android' to 'debug.' Consequently I used fastboot.exe to re-apply the PD98IMG.zip and it worked!
The old ROM is real smooth, so I may just keep it, but if I can figure out how to apply a newer build I will.
Thanks!
Click to expand...
Click to collapse
Any chance I could get you to get me a copy of your original 2.3.3 ROM? I would like to try this. My phone Inspire 4G is bricked.....
pharoah1974 said:
Any chance I could get you to get me a copy of your original 2.3.3 ROM? I would like to try this. My phone Inspire 4G is bricked.....
Click to expand...
Click to collapse
The original Stock rom can be found in www.shipped-roms.com or you can get the lastest 2.3.5 AT&T rom at the HTC support Site.
glevitan said:
The original Stock rom can be found in www.shipped-roms.com or you can get the lastest 2.3.5 AT&T rom at the HTC support Site.
Click to expand...
Click to collapse
Thanks. I will try that.
Hi All!
Recently i flashed TWRP and Cynogenmod 10.2.1 stable to my HTC Telestra One XL (evita)
I unlocked boot-loader
I successfully rooted
But I shut down once, and when i tried to boot, it got stuck in a boot-loop
Upon many retries, it suddenly wont turn on
when I charge it it only has a flashing red light but it wont even turn on, no screen not buttons; nothing!
And if I plug it in to my PC, the pc keeps sounding the USB Connected sound multiple times over a short period of 30 seconds to 2 minutes and then it gives off multiple shaky beeps
I hope this is enough info to let anyone help out!
Thank You in Advance
EDIT:
when connected to a pc it shows drivers is ready to use but tries to install QHUSB_DLOAD but fails and latest RUU does not detect
Thx again
What is the exact full filename of the ROM zip that you flashed? When a device is showing up as QHSUSB_DLOAD in Windows it usually means it's bricked.
Sent from my Evita
timmaaa said:
What is the exact full filename of the ROM zip that you flashed? When a device is showing up as QHSUSB_DLOAD in Windows it usually means it's bricked.
Sent from my Evita
Click to expand...
Click to collapse
Just found out:
a friend of mine tried to flash a file named "cm-10.0.0-evita" and it gave off a message saying that this phone is not rooted or missing supersu/ something along those lines
before that he wiped sd card (whole thing)...
and then it went off from there
NOTE: its a phone with mess with, but still want to fix even though its just a side phone we barely use....help appreciated
So does it power on at all?
Sent from my Evita
timmaaa said:
So does it power on at all?
Sent from my Evita
Click to expand...
Click to collapse
nope
when plugged in it only has a red LED that flashes once every once in a while and thats it
pc recognises it but wants to install qhusb_dload (as mentioned) and it just sais no driver found
i am researching and i found something called a "RIFF Box" but unsure if its worth it, plus i dont know where to jtag it (if its possible at all)
PS: hi from sydney!
Al-Dazzlez said:
Just found out:
a friend of mine tried to flash a file named "cm-10.0.0-evita" and it gave off a message saying that this phone is not rooted or missing supersu/ something along those lines
before that he wiped sd card (whole thing)...
and then it went off from there
NOTE: its a phone with mess with, but still want to fix even though its just a side phone we barely use....help appreciated
Click to expand...
Click to collapse
How did he try to flash it -_- these vague responses make it very hard to help. Bottom line is you can try pressing and holding power until the light goes off and then power and volume down to get the bootloader up, if that doesn't work you can try the evita jet tool to try to unbrick it. Bricks such as yours are not recoverable 9 times out of 10.
It looks like your only option is to get a jtag repair done. I wouldn't bother trying to do it yourself unless you're a fully experienced electronic engineer or the like. I'm not sure how many jtag repairers there are in Australia but I'm guessing Google should be able to reveal that information. Howdy from Melbourne.
Sent from my Evita
Hi from Canada!... I just wanted to be part of the greetings.. :laugh:
exad said:
How did he try to flash it -_- these vague responses make it very hard to help. Bottom line is you can try pressing and holding power until the light goes off and then power and volume down to get the bootloader up, if that doesn't work you can try the evita jet tool to try to unbrick it. Bricks such as yours are not recoverable 9 times out of 10.
Click to expand...
Click to collapse
he placed the cyanogen mod on the phones sd card, then he wiped sd card, after that he used the install function on twrp it gave him a message that his phone is not rooted and if he would like to root it, he accepted, then it rebooted into twrp, and he tried again to install, same message appeared and then he gave up and shut it down...(sorry for vague terms, please bear with me, still trying to learn the ropes of talking on this forum)
I gotta say, this is all very odd :/ How did he install anything if he wiped the SD card after copying it over? :/ hmmmm In any case, you CAN try he jet tool as per my last post before getting a jtag. You'll need a linux install or Bootable USB stick/CD/DVD though.
My guess is that the only thing he installed was SuperSU. That'd be why it booted straight back into TWRP.
Sent from my Evita
timmaaa said:
It looks like your only option is to get a jtag repair done. I wouldn't bother trying to do it yourself unless you're a fully experienced electronic engineer or the like. I'm not sure how many jtag repairers there are in Australia but I'm guessing Google should be able to reveal that information. Howdy from Melbourne.
Sent from my Evita
Click to expand...
Click to collapse
i researched..nothing..just some videos of people who do it (jtag)in the US and US only......
but still asking 'round the shops wont hurt i guess:laugh:
ill keep ya posted about using that tool you mentioned!
and exad; SUP!
and yeah.. it sounds weird to me too but i mainly play around with stuff like the galaxy series samsung's so the htc stuff is still new...and i have to admit...i am hating it so far.... but still experience cant hurt :laugh:
Hi guys!
im back
I JTAG'd the phone overseas, and it came back, surely enough, working, but now another problem arises,
the guy apparently unlocked the bootloader, S-Off, and installed CM with android 4.3.1. the phone boots, everything is well, but for times from 10 seconds to minutes of usage it just turns off, the Hboot shows
***tampered***
***relocked***
any idea wth is wrong with it now?
it does not reboot from power menu, and does not do anything really since I cant keep it on for more than a few minutes at most. I cannot keep it on long enough to unlock the bootlaoder anymore, and I cannot boot into TWRP (as the guy told me he put it on)
da hell do I Do now? any help appreciated
Try an RUU, any Evita RUU is fine if you have s-off.
Sent from my Evita
timmaaa said:
Try an RUU, any Evita RUU is fine if you have s-off.
Sent from my Evita
Click to expand...
Click to collapse
Thank you, tried but it did not pick up, but:
UPDATE:
I booted into teamwin, and flashed a CM11snapshot (latest one) everything seems fine so far (after 20 million dalvik and cache and factory restores) but now i am waiting for the problem to arise again, if not, ill have one problem left to fix....the back button does not work....
and now how the hell do i use an RUU on a custom frimware, ? (used it once on this phone but using a stock rom)
thanks again for your time timmaaa, seriously appreciated
Al-Dazzlez said:
Thank you, tried but it did not pick up, but:
UPDATE:
I booted into teamwin, and flashed a CM11snapshot (latest one) everything seems fine so far (after 20 million dalvik and cache and factory restores) but now i am waiting for the problem to arise again, if not, ill have one problem left to fix....the back button does not work....
and now how the hell do i use an RUU on a custom frimware, ? (used it once on this phone but using a stock rom)
thanks again for your time timmaaa, seriously appreciated
Click to expand...
Click to collapse
There's only one way to run an RUU, and that's to connect your phone and initiate the program in Windows. You're s-off so all security checks are disabled.
Sent from my Evita
timmaaa said:
There's only one way to run an RUU, and that's to connect your phone and initiate the program in Windows. You're s-off so all security checks are disabled.
Sent from my Evita
Click to expand...
Click to collapse
I Just ran one, Unlocked bootloader, on Cm11 snapshot after re-root and all that crap done, should be alright now
Sorry for flooding this Forum with something basic as this but as a mere mortal I don't possess the mental capacity nor stamina to crash course my way in to this whole developers battleground.
I got a HTC ONE S that had been unlocked( I think) and when stupid me tried to do a system update (uncustomed to the way of the android as a convert apple-noob:silly I updated the phone with some kind of CID package which immediately sent the HTC in to the dreadded:
"This build is for development purposes only 20second loop of doom"
so after hours of studying this ancient language of boots, CID, builds, and alien laungage mumbo I havn't even been able to get the USB fastboot to work.
thusly I admit defeat and beg and plead to ye ascent beings only know as developers to make a complete noob-proof course of action how to tackle this peculiar problem.
so can anyone please make a step by step guid of what to download, how to install, where to get it and what to do That'd beeee swell.:highfive:
also I'll be going away so may not answer until sunday
any takers on helping me solve this riddle?
Welcome to the world of bricking and screwing up. This is not like Apple jailbreaking where you press one button on a website and it works.
This is pain and suffering. I would try and run an RUU to get the phone to stock. There are tons of threads on how to run an RUU. If the phone is not S-OFF, you will have to relock boot loader to run the RUU.
808phone said:
Welcome to the world of bricking and screwing up. This is not like Apple jailbreaking where you press one button on a website and it works.
This is pain and suffering. I would try and run an RUU to get the phone to stock. There are tons of threads on how to run an RUU. If the phone is not S-OFF, you will have to relock boot loader to run the RUU.
Click to expand...
Click to collapse
alright cheers, pretty sure it's S-ON and despite not knowing anything you just said at least it's something.
I also assume I'll need USB fastboot for this so I guess I'll start by trying to get that working
Anyone else care to explain the steps to take in greater detail? This was not a failed attempt at jailbreaking it was purely accidental so I have no experience doing this
Edit: I might add I suck at searching through forums aswell (especially when I don't know what I'm looking for) so maybe just a link to the proper threads would help me loads
LuckyXII said:
Anyone else care to explain the steps to take in greater detail? This was not a failed attempt at jailbreaking it was purely accidental so I have no experience doing this
Edit: I might add I suck at searching through forums aswell (especially when I don't know what I'm looking for) so maybe just a link to the proper threads would help me loads
Click to expand...
Click to collapse
To get back to stock, you run an RUU (ROM update utility). Here is a thread:
http://forum.xda-developers.com/showthread.php?t=2678700
I guess it's similar to running iTunes and pressing the restore button - but more involved.
not sure if I have a custom recovery but either way I couldn't flash the recovery.img and the RUU I ran didn't work (it was the same RUU that was installed on the phone)
Phone is S-ON
hboot 2.15.0000
open dps v31.1.0.45.0815
eMMc-boot
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
LuckyXII said:
not sure if I have a custom recovery but either way I couldn't flash the recovery.img and the RUU I ran didn't work (it was the same RUU that was installed on the phone)
Phone is S-ON
hboot 2.15.0000
open dps v31.1.0.45.0815
eMMc-boot
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
Click to expand...
Click to collapse
Did you relock the boot loader before running RUU?
808phone said:
Did you relock the boot loader before running RUU?
Click to expand...
Click to collapse
I followed the steps but can't say I remember seeing "relocking boot loader" I will have to check this out further in the morning
LuckyXII said:
I followed the steps but can't say I remember seeing "relocking boot loader" I will have to check this out further in the morning
Click to expand...
Click to collapse
OK, then check this link out:
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
808phone said:
OK, then check this link out:
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Click to expand...
Click to collapse
cannot open "Unlock_code.bin" :/
tried everything... changing the directive in cmd to match the location of the bin file but nothing works
adb can't find my device but fastboot can which could be why the RUU nor unlocking bootloader won't work and to get adb to work I need to enable USB debugging which can't be done while the phone is looping (unless some1 knows the right command line)
I am retarded
since I got this phone second hand I didn't know what had been done with it other than what I installed to cause my problems...
one of the things that had been done previously was unlocking bootloader.. hence the very obvious "Unlocked" in the boot menu.... sooo unlocking an unlocked bootloader was kinda redundant
tried oem locking the boot b4 but missed to specify where the files where (C:adb), lock worked and RUU installed without a hing!
thanks for your help if I knew what I was doing your instructions would have worked perfectly!
Alright!!!!!! Well, you are set!
So..... now that's it's back to stock. Are you going to use it as-is? Or are you planning to try a custom ROM again?
Try booting into the boot loader by shutting off the phone, then pressing volume down while pressing power. If it doesn't go to boot loader, then press and hold power for something like 10 seconds until the phone shuts off, then press volume down, and power again. Keep holding volume down until you get the boot loader menu.
Write down what it says about your HBOOT and whether you are S-OFF or S-ON.
DO NOT CHOOSE ANY COMMANDS FOR NOW
Press and hold power until the phone turns off again when you are done. Then press power again to turn the phone on again after a few seconds to use your phone regularly.
808phone said:
Alright!!!!!! Well, you are set!
So..... now that's it's back to stock. Are you going to use it as-is? Or are you planning to try a custom ROM again?
Try booting into the boot loader by shutting off the phone, then pressing volume down while pressing power. If it doesn't go to boot loader, then press and hold power for something like 10 seconds until the phone shuts off, then press volume down, and power again. Keep holding volume down until you get the boot loader menu.
Write down what it says about your HBOOT and whether you are S-OFF or S-ON.
DO NOT CHOOSE ANY COMMANDS FOR NOW
Press and hold power until the phone turns off again when you are done. Then press power again to turn the phone on again after a few seconds to use your phone regularly.
Click to expand...
Click to collapse
well if I were to try something now that I've already started walking down the path it'd probably be kitkat...
http://forum.xda-developers.com/showthread.php?t=2183023
note sure if I'm ready though
LuckyXII said:
well if I were to try something now that I've already started walking down the path it'd probably be kitkat...
http://forum.xda-developers.com/showthread.php?t=2183023
note sure if I'm ready though
Click to expand...
Click to collapse
OK take your time and when you are ready, PM me. I really do suggest CandyKat if you go for a custom ROM. It is the best ROM I have used on the ONE S. CM11 was ok for me, but for some reason CandyKat is just running so much better.
808phone said:
OK take your time and when you are ready, PM me. I really do suggest CandyKat if you go for a custom ROM. It is the best ROM I have used on the ONE S. CM11 was ok for me, but for some reason CandyKat is just running so much better.
Click to expand...
Click to collapse
Alright I will look in to it! Thank you for all the help wouldn't have done it without you