Related
So I'm in a horrible bootloop, but I got my phone recognizing the PB31IMG file, but when I click update, then select reboot, it enters bootloop again..anyone have an idea?
It's an incredible.
Ryanism said:
So I'm in a horrible bootloop, but I got my phone recognizing the PB31IMG file, but when I click update, then select reboot, it enters bootloop again..anyone have an idea?
It's an incredible.
Click to expand...
Click to collapse
you did it from recoveryy?
in adition you posted it in A&Q of htc incredible?? i´m sure that in that thread can someone help you.. here are a lot of noob people..
did it there..no responses
No, from hboot. I can't get to recovery.
Ryanism said:
did it there..no responses
No, from hboot. I can't get to recovery.
Click to expand...
Click to collapse
if you can enter into bootloader you can enable usb debug yes?
okay you can copy paste another or the same rom to sd card and then flash it via adb.
Never heard of ADB what is it and where can I get it?
And I've added the files with the SD card reader, not sure i'm able to read the phone with it plugged into my comp..
Ryanism said:
And I've added the files with the SD card reader, not sure i'm able to read the phone with it plugged into my comp..
Click to expand...
Click to collapse
try it... put your device in the bootloader (hboot) and conect it to your pc if you have installed the htc sync drivers and the pc recognices your device you are able to do usb debug for run adb parameters.
ADB PARAMETERS are part of the software of "sdk" of android (software development kit)
download from here http://developer.android.com/sdk/index.html
and read about it browsing in google....
sdk runs in a windows CMD
is the only way to restore your device if you can´t enter into recovery menu
later when you read about and how to use adb commands i´ll post here the exact commands that you must to enter for restore your device..
but tomorroww now i´m going to bed here are the 4:08 am
I"m installing it now, thanks so much..hopefully I can figure this out.
So I got to cmd..made it to "adb devices" and it said "list of devices attached", but nothing was listed.
Also, when I type adb devies, I get * daemon started successfully *
Ryanism said:
Also, when I type adb devies, I get * daemon started successfully *
Click to expand...
Click to collapse
okay lets go....
if you write in the CMD (in the sdk folder) this:
"adb" (ENTER)
"adb reboot"(ENTER) for example... your device should to reboot... try it and let´s go to flash a rom
EDIT: remember.. for to run any adb comand you must to stay in adb folder..
if i don´t forgot it it´s in "platform-tools" folder of the "sdk file"
in my case:
c:\users\evodroid}cd..
c:\users}cd..
c:\cd sdk
c:\sdk}cd platform-tools
c:\sdk\platform-tools}adb
c:\sdk\platform-tools}adb reboot
daemon sucesfully.....
..... wait... (the device reboots)
OK..wait, I have an androidsdk folder in my C:/..not adb folder..
I'm getting an error: device not found
I put in my root C:/ an adb folder and i also copied its contents to the tools folder in my androidsdk folder as well..
Ryanism said:
OK..wait, I have an androidsdk folder in my C:/..not adb folder..
Click to expand...
Click to collapse
adb its the parameter, not a folder..
you must put the sdk folder (the general) into the root of c:\
then browse where you have the adb files (nornally in the sdk--platform-tools)
in this folder you can use adb parameters
when you write "adb" (enter) shows you the all the functions that adb has????
if it happens your sdk its installed well
I believe I did what you wrote and it didn't work. at adb reboot, nothing happened. Doesn't recognize my device.
hi mates!i´m new here and i´m reading about your thread and i had the same problem are you doing it from the bootloader or fastboot?
EDIT: ei sergi.3210!!!!!!!!! are u the same person that the developer roms from htcmania.es?¿?¿?¿?¿?¿? ooohh man you are in the all the sites hahahha
i have your hero rom installed and works great,, and your "serkernel12c" my hero its working at 714 mhz!!!!
spike_14 said:
hi mates!i´m new here and i´m reading about your thread and i had the same problem are you doing it from the bootloader or fastboot?
EDIT: ei sergi.3210!!!!!!!!! are u the same person that the developer roms from htcmania.es?¿?¿?¿?¿?¿? ooohh man you are in the all the sites hahahha
i have your hero rom installed and works great,, and your "serkernel12c" my hero its working at 714 mhz!!!!
Click to expand...
Click to collapse
cheers.... yes i am... welcome spike we meet again
Ryanism said:
I believe I did what you wrote and it didn't work. at adb reboot, nothing happened. Doesn't recognize my device.
Click to expand...
Click to collapse
are you doing like spike says? from the bootloader or from fastboot? windoze recognizes your device?
i am having pblms going into recovery ....
i want a sbf file which i could directly flash using RSD LITE ....plz i need it
thanx in advance .i knw some 1 here can do it only
use can download the GOT 2.2.1 sbf file
irfiboy said:
i am having pblms going into recovery ....
i want a sbf file which i could directly flash using RSD LITE ....plz i need it
thanx in advance .i knw some 1 here can do it only
Click to expand...
Click to collapse
Since the milestones bootloader is locked, we cannot create sbf files to flash on it. The only ones are stock eclaire, stock froyo, and the got 2.2.1 leak. All are signed by motorola. It is for that reason that it is impossible for you to attain this. I would suggest re-downloading androidiani openrecorvery to your sd card, and trying again, because thats the only way your gunna get miui. You could also try minimod openrecovery.
Just do what they are saying, flash a signed Motorola sbf, then root it and get Androidiani running and use it to flash MIUI.
Try this or this. Make sure you have openrecovery on your sdcard and miui in your updates folder.
y no recovery is working i cant go to next step of pressing camera and volume up button to enter recovery menu
irfiboy said:
y no recovery is working i cant go to next step of pressing camera and volume up button to enter recovery menu
Click to expand...
Click to collapse
There is no need to press any keys.
1. First extract a fresh copy of AOR to sdcard. Then copy miui zip file under updates folder
2. Next, activate usb debugging mode in your phone and connect to pc.
3. Open up command prompt and enter the following commands in order.
Code:
adb devices ( this should show as your phone being connected )
adb shell "echo 'boot-recovery ' > /cache/recovery/command"
adb shell "echo '--update_package=SDCARD:update.zip' >> /cache/recovery/command"
adb shell "reboot recovery"
That's it. Your AOR should load.
sileshn said:
There is no need to press any keys.
Code:
adb devices ( this should show as your phone being connected )
That's it. Your AOR should load.
Click to expand...
Click to collapse
open up cmd on windows and enter adb
it says adb is not recognised as an internal or external commans
im a total noOb
u will have to write down the steps as if you want a 5 year old to folloow u
irfiboy said:
open up cmd on windows and enter adb
it says adb is not recognised as an internal or external commans
im a total noOb
u will have to write down the steps as if you want a 5 year old to folloow u
Click to expand...
Click to collapse
You could also use Google, as you can find detailed guides that start at installing drivers for windows, that you probably don't have.
And, as I understand that your phone works, you can always use terminal emulator from market, which doesn't need the drivers and works exactly like using adb through windows cmd line.
irfiboy said:
open up cmd on windows and enter adb
it says adb is not recognised as an internal or external commans
im a total noOb
u will have to write down the steps as if you want a 5 year old to folloow u
Click to expand...
Click to collapse
Haha. You need to have android sdk installed to get adb working. Or as Jack said, try the commands using TE, without the adb shell and without the quotes.
Sent from my GT-I9100 using Tapatalk
using jacks idea is great, yes my cell is working... i have installed and whenever i put in a command it says permission denied
this states that most probably my cell is not rooted yet
i tried using androot and it does give the temporary root and fails on permanent root, but still i cant execute any command in te
please b patient and help
Try z4root for rooting your phone. And install android sdk. There are many sticky threads telling you how to install android sdk.
http://forum.xda-developers.com/showthread.php?t=833953
did you flash the vulnarable recovery ? without that you cant get into recovery.
bump... any one with miui sbf plzzzz
irfiboy said:
bump... any one with miui sbf plzzzz
Click to expand...
Click to collapse
I don't even think you can create an sbf for a ROM. I only know of Nandroid backups.
irfiboy said:
bump... any one with miui sbf plzzzz
Click to expand...
Click to collapse
As everyone told you already, because of the locked bootloader you can't flash any .sbf you want. Only Motorola's and GOT's that has vulnerable recovery injected.
To flash MIUI rom, use OpenRecovery and flash the .zip file.
hi guys, i'm trying to install the clockwork touch 5.8.0.2 crespo on my Nexus S (GSM), i have create the folder in C: with in the file, i have installed the driver of my phone, but when i open the prompt for write fastboot flash recovery recovery-clockwork-touch-5.8.0.2-crespo.img, he tells me "fastboot is not recognized as internal or external command, executable programm or file batch.", what can i do??
i also want to install this after: http://forum.xda-developers.com/showthread.php?t=1764119, someone can help me also for this??
DavideDroid said:
hi guys, i'm trying to install the clockwork touch 5.8.0.2 crespo on my Nexus S (GSM), i have create the folder in C: with in the file, i have installed the driver of my phone, but when i open the prompt for write fastboot flash recovery recovery-clockwork-touch-5.8.0.2-crespo.img, he tells me "fastboot is not recognized as internal or external command, executable programm or file batch.", what can i do??
i also want to install this after: http://forum.xda-developers.com/showthread.php?t=1764119, someone can help me also for this??
Click to expand...
Click to collapse
You need to have AndroidSDK installed or atleast have fastboot executable.
Once you have that, you can either set the path in environment variables or just go to that path using command line and use the fastboot command.
You should follow this instruction, it's very helpful.
http://nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/
superatmos said:
You need to have AndroidSDK installed or atleast have fastboot executable.
Once you have that, you can either set the path in environment variables or just go to that path using command line and use the fastboot command.
Click to expand...
Click to collapse
I already have the SDK; the site from which i was following the tutorial have told me i miss the fastboot.exe, can you tell me where I can find it??
rubenflush said:
You should follow this instruction, it's very helpful. (i can't quote the url)
Click to expand...
Click to collapse
But that is for the 4G version, is the same thing?
I just rooted my first Android device the day before yesterday. One problem I ran into is that the Android SDK now installs to "C:\Users\USER\AppData\Local\Android\android-sdk" instead of "C:\android-sdk" like most instructions give.
These are the instructions I followed to root my phone: wiki.cyanogenmod.com/wiki/Nexus_S:_Full_Update_Guide (Sorry for the lack of a link. I just found out I'm not able to post links because I'm new )
They helped me out a lot but it took a lot of time and concentration to get it done. Just keep in mind where Android SDK installs and change the paths to the new path when you need to.
DeadBra1ns said:
I just rooted my first Android device the day before yesterday. One problem I ran into is that the Android SDK now installs to "C:\Users\USER\AppData\Local\Android\android-sdk" instead of "C:\android-sdk" like most instructions give.
These are the instructions I followed to root my phone: wiki.cyanogenmod.com/wiki/Nexus_S:_Full_Update_Guide (Sorry for the lack of a link. I just found out I'm not able to post links because I'm new )
They helped me out a lot but it took a lot of time and concentration to get it done. Just keep in mind where Android SDK installs and change the paths to the new path when you need to.
Click to expand...
Click to collapse
Thank you very much, tomorrow i try again following this tutorial
Yes same thing, sorry for late post.
Sent from my Nexus S using xda app-developers app
Not needed..............
@jmz will this work on OS 4.5.2
krazyace35 said:
@jmz will this work on OS 4.5.2
Click to expand...
Click to collapse
I don't see why it wouldn't as I am on 4.5.3 and it worked.
jmz said:
I don't see why it wouldn't as I am on 4.5.3 and it worked.
Click to expand...
Click to collapse
Cool thanks I'll give it a try and thanks for this unlock tutorial
jmz said:
You will need a linux box or python installed on windows. Find instructions on the web for that.
Step 1: Download attachment
Step 2: Run command and make note of code return
Code:
adb shell cat /sys/block/mmcblk0/device/manfid
Step 3: Run command and make note of code return
Code:
adb shell cat /sys/block/mmcblk0/device/serial
Now you should have 2 sets of numbers. first should be in the format of 0x0000XX where XX is numbers. And the other is 0xSSSSSSSS.
So now use the downloaded file and execute (obivously replacing the entries with what was returned above.
Code:
./cublock.py XX SSSSSSSS
This will tell you you have unlock.signed now. So move that to your fastboot/adb directory and then reboot to bootloader and issue this command
Code:
adb reboot-bootloader
fastboot -i 0x1949 flash unlock unlock.signed
Once done, get back to android and do the following:
Code:
adb shell
su
idme print
You should now see unlock_code: AAAAAAAA and on and on.
Now go flash my TWRP build in OG dev
Original credit goes to @dpeddi & @vortox for the exploit. I did nothing to this code and it is all their work. So give them thanks
Click to expand...
Click to collapse
Sorry for the noob-ish question. How do you get adb to recognize the fire? When I type "adb devices" there are no devices present.
ryanyz10 said:
Sorry for the noob-ish question. How do you get adb to recognize the fire? When I type "adb devices" there are no devices present.
Click to expand...
Click to collapse
do steps 1 through 6 in this thread
http://forum.xda-developers.com/fire-hd/general/root-supersu-stable-appstore-custom-t3113311
Question
Sorry for another question. When I type ./cublock.py, I get ". is not recognized as an internal or external command".
Sorry again for being annoying lol
ryanyz10 said:
Sorry for another question. When I type ./cublock.py, I get ". is not recognized as an internal or external command".
Sorry again for being annoying lol
Click to expand...
Click to collapse
if on windows you need to get python installed
jmz said:
if on windows you need to get python installed
Click to expand...
Click to collapse
I've got python 3.4.2 installed. Which version would you recommend?
After some researching, people have said that python doesn't work very well on Windows 10, which is what I'm on right now.
jmz said:
You will need a linux box or python installed on windows. Find instructions on the web for that.
Step 1: Download attachment
Step 2: Run command and make note of code return
Code:
adb shell cat /sys/block/mmcblk0/device/manfid
Step 3: Run command and make note of code return
Code:
adb shell cat /sys/block/mmcblk0/device/serial
Now you should have 2 sets of numbers. first should be in the format of 0x0000XX where XX is numbers. And the other is 0xSSSSSSSS.
So now use the downloaded file and execute (obivously replacing the entries with what was returned above.
Code:
./cublock.py XX SSSSSSSS
This will tell you you have unlock.signed now. So move that to your fastboot/adb directory and then reboot to bootloader and issue this command
Code:
adb reboot-bootloader
fastboot -i 0x1949 flash unlock unlock.signed
Once done, get back to android and do the following:
Code:
adb shell
su
idme print
You should now see unlock_code: AAAAAAAA and on and on.
Now go flash my TWRP build in OG dev
Original credit goes to @dpeddi & @vortox for the exploit. I did nothing to this code and it is all their work. So give them thanks
Click to expand...
Click to collapse
Hi jmz,
I have a question here- all that was in your ZIP file was the cublock.py file.
Are we supposed to use this with the rest of draxie's tools in the HDX thread? If so, I was able to get an 'unlock.img' file, but nothing called 'unlock.signed'
maybe you didn't upload all the attachments we needed?
either way, thanks soooo much for your work !
edouble312 said:
Hi jmz,
I have a question here- all that was in your ZIP file was the cublock.py file.
Are we supposed to use this with the rest of draxie's tools in the HDX thread? If so, I was able to get an 'unlock.img' file, but nothing called 'unlock.signed'
maybe you didn't upload all the attachments we needed?
either way, thanks soooo much for your work !
Click to expand...
Click to collapse
sorry, with that tool you only get the unlock.img . I need to correct the post
In my linux box 'cuber' module, required by cublock.py, is not installed; is this the correct source? https://github.com/benesch/cuber
One more question: I forgot to block OTA update so my HD6 updated to 4.5.4, loosing root permissions. What I should do? Need to wait KingRoot supports the new software version or can I proceed to unlock bootloader and install twrp? Or could install, if available, a 4.5.3 recovery through dd? Very thanks.
I sense many roms being ported very soon...
Sure hope so!
I used the tools (cuber) in this post:
http://forum.xda-developers.com/kin...tools-create-unlock-img-fix-boot-img-t3050689
So i generated unlock.img, but i am still unable to enter fastboot mode,
i tried changing boot to 4002, i rooted and tried to execute fastboot file, nothing works tbh, how do you suppose i fix this?
thanks in advance
robert896 said:
So i generated unlock.img, but i am still unable to enter fastboot mode,
Click to expand...
Click to collapse
Need more info: Your computer OS, tablet device model (Settings>Device Options), Fire OS version (Device Options>System Updates). Tell exactly what happens when you run: adb reboot-bootloader.
DoLooper said:
Need more info: Your computer OS, tablet device model (Settings>Device Options), Fire OS version (Device Options>System Updates). Tell exactly what happens when you run: adb reboot-bootloader.
Click to expand...
Click to collapse
ok im on ubuntu 15.04 got full adb and fastboot (they work on other devices) --- fire os 4.4.3---device model, kfhd 3rd gen
i also have windows 7 x64 dual booted with full adb and fastboot set up also
when i do adb reboot-bootloader, it restarts but doesnt enter fastboot ,, it boots into normal mode
robert896 said:
device model, kfhd 3rd gen
Click to expand...
Click to collapse
These unlock instructions are for Fire HDs (4th gen). You need a fastboot cable for KFSOWI. Try G+ KFSOWI modding.
I am new to the tablet scene. This is my very first tablet. I would like to root the device and install custom recovery and hopefully custom Rom. Is this the first thing I do or should I start somewhere else?
After unsuccessfully attempt to flash identity crisis phone not able to flash any other rom seems to me bricked, any solution?
Sent from my MI PAD using XDA Free mobile app
Fastboot flash the XT1033 5.0.2 Firmware Image for your phone from here:
http://forum.xda-developers.com/mot...y-firmware-t3110795/post60792279#post60792279
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
If you have problems, provide a full and complete fastboot log (copy and paste the fastboot screen)
I am on cm 12.1 now.
I wanted to use your rom.
Sent from my MI PAD using XDA Free mobile app
Nishblueweapon said:
I am on cm 12.1 now.
I wanted to use your rom.
Click to expand...
Click to collapse
Something has happened to your phone. If you do what I describe above, any custom ROM should work.
Will try buddie
Sent from my MI PAD using XDA Free mobile app
lost101 said:
Something has happened to your phone. If you do what I describe above, any custom ROM should work.
Click to expand...
Click to collapse
in fastboot mode it says waiting for device.
To be sure i have installed latest drivers via motorola device manager.
Nishblueweapon said:
in fastboot mode it says waiting for device.
To be sure i have installed latest drivers via motorola device manager.
Click to expand...
Click to collapse
@lost101 i hope this could help him
it won't work that easy. On what window you are ?? I don't give a damn which driver you installed http://forum.xda-developers.com/showthread.php?t=2588979
just install the latest version from here.... Let it download and then i
MAKE SURE YOU HAVE USB DEBUGGING ON FROM DEVELOPERS SETTINGS
it will ask you for something like installing system wide adb and fastboot devices. Let it install at last skip the installing device software.
Now just go to c drive of your system or drive in which you have your window installed(drive) installed. Now you see adb named folder on the root of the drive.
Just press shift key first and right click then, you will see there a option of opening with command prompt or something.
Voila !!! you are now in adb .
To check you have right driver installed
give coomand like: adb devices this will show your device in the window...
if you see your device then type command: adb reboot bootloader this will bring you into bootloader menu...
TO check here that you are properly set yourself type command: fastboot devices
sachoosaini said:
@lost101 i hope this could help him
it won't work that easy. On what window you are ?? I don't give a damn which driver you installed http://forum.xda-developers.com/showthread.php?t=2588979
just install the latest version from here.... Let it download and then i
MAKE SURE YOU HAVE USB DEBUGGING ON FROM DEVELOPERS SETTINGS
it will ask you for something like installing system wide adb and fastboot devices. Let it install at last skip the installing device software.
Now just go to c drive of your system or drive in which you have your window installed(drive) installed. Now you see adb named folder on the root of the drive.
Just press shift key first and right click then, you will see there a option of opening with command prompt or something.
Voila !!! you are now in adb .
To check you have right driver installed
give coomand like: adb devices this will show your device in the window...
if you see your device then type command: adb reboot bootloader this will bring you into bootloader menu...
TO check here that you are properly set yourself type command: fastboot devices
Click to expand...
Click to collapse
I am on win. 7. It first gave me an error adpwinal.DLL file is missing from your PC while I was trying to flash those commands in cmd window, so I installed that file on my PC. Whenever I am in fastboot mode now it doesn't recognise me device. & normally it does. I think the problem with fastboot files, it shows USB connected. Will try what u said.
Sent from my Moto G using XDA Free mobile app
while flashing the system files it says file too large
To be sure i was on cm 12.1 (5.1.1) & i have flashed ASia retail 5.0.2?
Where i am wrong?
Nishblueweapon said:
while flashing the system files it says file too large
To be sure i was on cm 12.1 (5.1.1) & i have flashed ASia retail 5.0.2?
Where i am wrong?
Click to expand...
Click to collapse
Use mfastboot.exe: https://www.androidfilehost.com/?fid=24052804347778493
lost101 said:
Use mfastboot.exe: https://www.androidfilehost.com/?fid=24052804347778493
Click to expand...
Click to collapse
Got it to boot successfully. Thank u
What I did was flashed 1 more system I.e. 0 not mentioned in the op
Sent from my MI PAD using XDA Free mobile app