Used Matt's utility and flashed the official KitKat update! I used the no wipe method. All good. I rooted. All good. Then I updated TWRP. Again, all good, well with the exception I get unknown sim error for my ATT StraightTalk sim and no APNs are available. Why aren't the APNs showing since the utility uses the unlocked radio?
Now I proceed to flash KitStalk hopping to conquer the sim card issue. Flash the latest version and I get stuck on the Moto Dual Core Screen!
Am I missing some info here or what?
Related
Hi, i have the xt926, was working fine, but i did a test using *#*4636#*#* , i selected usa band ,said successful, then selected again cellular, said unsuccessful, lost gsm connectivity, now no work for gsm!!!! Reset the phone reset the sim, factory reset, etc nothing worked!!!
Any ideas? I am heading towards flashing again the rom!
update:
phone was just rooted, no unlocked bootloader ever, running latest firmware and was just debloated.
Any ideas how to install again all the firmware? I tried rsd lite but failed, the latest whole version i found , was saying in fastboot fail due to downgrade.
I will try now DroidHD Utility 2.0 Lite to see if i can do anything
I think i should make a new post, used DroidHD Utility 2.0 Lite and i am back on gsm!Just lost 2 hours of my life but gained back thanks to this tool!Donation time!
Bad news!!
I was so eager to update to Kitkat for my Australian Version Moto G, then I forgot to backup my stock rom before flashing the CM11~ Following the instruction, I have flashed the Modem for 4.4.2 as well. However, The SIM card cannot get reception, and while searching for the operator, it popped out that "your sim card does not allow a connection to this network".
When I am trying to flash back the 4.3 modem back to my device, it said that "this is for xt1033, and this device is xt1032"。。。
Is there anyway that I can get back????
Looking for help......
elequent said:
Bad news!!
I was so eager to update to Kitkat for my Australian Version Moto G, then I forgot to backup my stock rom before flashing the CM11~ Following the instruction, I have flashed the Modem for 4.4.2 as well. However, The SIM card cannot get reception, and while searching for the operator, it popped out that "your sim card does not allow a connection to this network".
When I am trying to flash back the 4.3 modem back to my device, it said that "this is for xt1033, and this device is xt1032"。。。
Is there anyway that I can get back????
Looking for help......
Click to expand...
Click to collapse
decompress this and run the flash-all script in fastboot.
Blur_Version.14.85.4.falcon_umtsds.AsiaRetail.en.03
http://sbf.droid-developers.org/download.php?device=14&file=796
will return you to total stock. then you should be able to OTA update to kitkat as well as it was just released for the XT1033
Hello, just upgraded from a Galaxy S4 on T-Mobile to an unlocked Verizon HTC One M8 handset. Popped in the sim, I can send and receive text, data on HSPA/3G mode but not one LTE or Global mode (anyone know why this is? I'd like to be able to use t-mobiles LTE and not just HSPA/3G), get the usual "sim unknown source" stuff. I am wanting to flash Skydragon.
My question, is there anything special I need to do before/after I flash these, since I'm using a different network than what the handset was originally supposed to be on? Maybe I need to flash different radio? This is my first time using an unlocked phone, previously all my phones with custom ROMs were on the same network as the handset variant.
Otherwise, would I just update to the latest 5.0.1 OTA update from Verizon, root/unlock bootloader, install TWRP, then flash Skydragon, and I'm all good?
Edit: Well, further reading seems to indicate to me that it turns out verizon M8 devices already updated to 5.0.x are still not able to be rooted at this time?
Thanks for the help
Hi guys. I recently got a Moto G and i knew sim card was not detected by network. Phone it detects it,even apn's. Problem is,it says on operators selection that my sim cant register on the network. My primary phone is a M7 in wich i use my sim just fine.
Also,it is possible to be a cdma phone,but why it has a sim slot and model number as international version? Anyway,in settings it says something about a baseband and not about radio version. Also my htc has baseband version not radio version and it works on gsm.
Anyway,is it possible to flash only modems(radios) on this phone w/o risking of bricking it? I wanna flash GB radios.
And i kinda dont know the whole process since i never had to do it on any of my phones. I would be very thankfull if someone can put me in the right direction with this. Thanks!
Edit : i forgot to mention. I am on cm 12.1 unlocked with latest bootloader.
You should flash stock ROM and try. Sometime CM ROM not work.
Hi everyone,
In August I received an OTA for my SM-G955W. I installed it and immediately after it rebooted I got an “Invalid SIM” error message.
I took my SIM card out and put it in another phone and it worked perfectly. I put another SIM in my phone and it gave the same error. So obviously the problem was with the phone, not the SIM.
There is a Reddit thread dealing with this exact problem.
https://www.reddit.com/r/GalaxyS8/comments/i9b58o/invalid_sim_card/
I managed to get my phone working by flashing an older modem version using ODIN as was suggested in the Reddit thread (posted above). But now I cannot get any future OTA updates because it says “Your current software version issue supported”. Presumably that is because I have a mismatched modem file flashed.
Is there any way out of this?
Is there any way to get LineageOS on this device? It is a Snapdragon processor and I think the unofficial LinageOS builds only work on the Exynos models. Or is that incorrect?
Thanks,
The Fish
Flash with odin original firmware for your country and carrier sammobile.com/samsung/galaxy-s8-plus/firmware/#SM-G955W .