Hi Guys,
So I got a new Razr HD from Verizon, and took it to Canada where I live. I travel a lot from the USA to Canada. The phone specs seem to indicate that it has all the bands necessary to support all the GSM and LTE bands as well as CDMA when in the states. I was able to easily get 3G/H+ service from Rogers in Canada by simply changing the Network Mode to GSM/UMTS instead of Global and then adding an APN for Rogers. However, I cannot get LTE service. The LTE choice seems to be bundled with CDMA LTE/CDMA but I don't think that matters, I think its just a radio choice. However, when selecting this, I get an error from the phone saying "No LTE networks could be found" and Do I want to switch to GSM?
This is sad because the phone would be excellent on LTE. Does anyone know how to get a Verizon branded phone to run on Rogers LTE?
If you have any ideas let me know, I will test them.
Thanks,
Blue
BluePlanetMan said:
Hi Guys,
So I got a new Razr HD from Verizon, and took it to Canada where I live. I travel a lot from the USA to Canada. The phone specs seem to indicate that it has all the bands necessary to support all the GSM and LTE bands as well as CDMA when in the states. I was able to easily get 3G/H+ service from Rogers in Canada by simply changing the Network Mode to GSM/UMTS instead of Global and then adding an APN for Rogers. However, I cannot get LTE service. The LTE choice seems to be bundled with CDMA LTE/CDMA but I don't think that matters, I think its just a radio choice. However, when selecting this, I get an error from the phone saying "No LTE networks could be found" and Do I want to switch to GSM?
This is sad because the phone would be excellent on LTE. Does anyone know how to get a Verizon branded phone to run on Rogers LTE?
If you have any ideas let me know, I will test them.
Thanks,
Blue
Click to expand...
Click to collapse
Short answer, you can't. Different LTE bands. Rogers is 4 and 17, Verizon is 1, 3, 5, 13, 25. No overlap, and no-one currently makes LTE hardware that supports ALL LTE bands.
EdwardN said:
Short answer, you can't. Different LTE bands. Rogers is 4 and 17, Verizon is 1, 3, 5, 13, 25. No overlap, and no-one currently makes LTE hardware that supports ALL LTE bands.
Click to expand...
Click to collapse
Just wanted to add to this... I tested my Samsung Galaxy S3, a generic version that I got from Amazon, works on AT&T in the USA on LTE and in ROGERS in Canada. Too bad the Verizon Droid does not support a similar global LTE band. Or does AT&T and Rogers simply have the same LTE bands???
BluePlanetMan said:
Just wanted to add to this... I tested my Samsung Galaxy S3, a generic version that I got from Amazon, works on AT&T in the USA on LTE and in ROGERS in Canada. Too bad the Verizon Droid does not support a similar global LTE band. Or does AT&T and Rogers simply have the same LTE bands???
Click to expand...
Click to collapse
Yes, AT&T and Rogers have maintained the same bands since they were partnered maybe 10 years ago. Fido is owned by Rogers, so it also uses the same, from GSM up to LTE.
Neither AT&T or Verizon use "global" LTE bands, because there aren't any. Almost every country/provider uses different bands. There's some crossover, but with LTE, buy a phone for the market you are in, because you probably couldn't afford the roaming rates abroad anyway.
Hey guys, I think I have a related question.. maybe you guys can help
I live in Toronto and Rogers is my wireless carrier. From my understanding, Rogers operates on band 4 (1700 / 2100 mhz) as well as 2600 Mhz.
I am thinking of gettnig the new DROID MAXX from Verizon. I have tried asking the Verizon / Motorola reps about whether the LTE would work in Canada but wasn't able to get a firm answer.
From the Motorola website, however, as well as from gsmarena.com, it looks like the DROID MAXX will have access to not only LTE 700mhz, but also at 1700 and 2100 mhz.
What are the chances that this phone will work on Rogers LTE?
Really hoping it could work out... let me know if you guys have any ideas..
So T-Mobile seems to be ramping up their LTE coverage and my area seems to be one of the LTE markets.
I was wondering, would now be a good time to buy an AT&T Android LTE phone (like the Note 2 or GS3)?
I'm not entirely clear if the LTE on those AT&T phones will work with the current/future T-Mobile LTE network.
Right now I'm currently using an iPhone 4 on T-Mobile. I get spotty 3G coverage since I'm in one of the 1900MHz refarmed areas. Would using an AWS LTE compatible AT&T phone let me get T-Mobile LTE service?
Is T-Mobile eventually going to get rid of their 3G service on the 1700MHz frequency so they can use it for LTE and then put their 3G service on the 1900MHz frequency?
I can't afford a brand new phone, but when it comes to used phones it always seems that AT&T ones are cheaper to buy than T-Mobile equivalent.
Outrager said:
So T-Mobile seems to be ramping up their LTE coverage and my area seems to be one of the LTE markets.
I was wondering, would now be a good time to buy an AT&T Android LTE phone (like the Note 2 or GS3)?
I'm not entirely clear if the LTE on those AT&T phones will work with the current/future T-Mobile LTE network.
Right now I'm currently using an iPhone 4 on T-Mobile. I get spotty 3G coverage since I'm in one of the 1900MHz refarmed areas. Would using an AWS LTE compatible AT&T phone let me get T-Mobile LTE service?
Is T-Mobile eventually going to get rid of their 3G service on the 1700MHz frequency so they can use it for LTE and then put their 3G service on the 1900MHz frequency?
I can't afford a brand new phone, but when it comes to used phones it always seems that AT&T ones are cheaper to buy than T-Mobile equivalent.
Click to expand...
Click to collapse
It has been my understanding that AT&T and T-Mobile smartphones are network cross-compatible because they use the same bands for HSPDA and LTE. So as long as you have the following, you should be good to go.
First and most important: ***Phone Unlocked***
The correct sim for the carrier.
The correct APN settings for the carrier. (If this isn't auto-populated after the new sim is in the phone, you can search here on XDA for them.)
Lastly, apply any patches/fixes/tweaks for the particular device where needed. (if needed)
As for this network cross-compatibility changing in the future, odds are that it probably will not happen any time soon as this would be very costly for the carrier to change so soon after launching the LTE service. Post-LTE, maybe, but that is at least another 10 years away if I had to guess. :fingers-crossed:
Hi,
I'm using a verizon M8 on a non-verizon network. The Verizon version should support 4G LTE on band 3 and 14 (the hardware should even support 3,4,7,13). My provider supports 4G LTE on band 3 and 7, yet i don't receive 4G.
I'm guessing Verizon locks 4G to their network. Is there any way to unlock my phone so i can use 4G LTE with my provider? (T-mobile NL)
I am willing to do anything. Already reflashed my phone with verizon ROM but that doesn't help obviously because it's not a stock rom..
Thanks!
There is a working solution for the Android:
http://forum.xda-developers.com/verizon-htc-one-m8/general/lte-band-7-2600mhz-finally-guide-t2992523
I think, there IS a way to adopt it to the Windows Phone.
htc m8 for windows verizon
Any news how to activate lte band?
looking for this too. In my country there are 3/20 bends and verizon edition has that band but I cant use 4g
Hi All,
I was recently on holidays in the USA which using my Photon Q sim modded by Cornholio I was able to get LTE on T-Mobile. This was only in areas where they have re-farmed 1900 mhz (band 2) to LTE. I'm not sure if this makes a difference but I also changed nv 6828 for 1900mz bands 2 & 25. So in theory LTE should work on AT&T where they use 1900 mhz band 2 LTE. AT&T was was coming up a lot when I was doing a network search. It is listed as AT&T 4g.
Regards,
Sebastian
cyri2 said:
So in theory LTE should work on AT&T where they use 1900 mhz band 2 LTE. AT&T was was coming up a lot when I was doing a network search. It is listed as AT&T 4g.
Click to expand...
Click to collapse
Hope you enjoyed your visit...
I've never played with any of this, but I'm an AT&T user in US... what exactly are you saying to try setting in the phone in order to try to get LTE on AT&T.... and if there's any way to know if AT&T is using that band in a particular area?
enigma9o7 said:
Hope you enjoyed your visit...
I've never played with any of this, but I'm an AT&T user in US... what exactly are you saying to try setting in the phone in order to try to get LTE on AT&T.... and if there's any way to know if AT&T is using that band in a particular area?
Click to expand...
Click to collapse
Hi,
This is what I did with my phone to get LTE was the following: Using the phone dialer
*#*#4636#*#* and in phone information menu change data to LTE/GSM/WCDMA
##3282# and in the LTE menu make sure that you have LTE as enabled, if not edit the value to enabled. You need to use the msl code for your phone to do this. I have an app to do this if you need.
To see if AT&T 1900 LTE is available in your area, go into settings, mobile network settings, network operators and choose the option search networks. A list of available networks will come up. If you have AT&T 1900 LTE band 2 available, this will be listed as AT&T 4G. Tap on this and you should be able to get LTE. The Photon Q lists LTE as 4G in the status bar on the top of the phone.
Hope that this is some help
I have a htc one m8 verizon It is unlocked i use the cricket network 4G lte kind of works it works just for data but I can't call or text but when I use 3G I can call texts and use data. I saw some things on how to enable the 4g lte bands but none of them worked for me or they were too complicated to follow. So how can I enable the 4G lte bands so I get 4g lte on cricket