my moto g is not recognized by pc as media device so i can not transfare files. i have windows 7 32bit.
i tryed original motorola software and also all solutions i could find online but non worked. can someone help me please?
i have stock 4.2.2 rooted.
thank you guys in advance :victory:.
ManBearrrPig said:
my moto g is not recognized by pc as media device so i can not transfare files. i have windows 7 32bit.
i tryed original motorola software and also all solutions i could find online but non worked. can someone help me please?
i have stock 4.2.2 rooted.
thank you guys in advance :victory:.
Click to expand...
Click to collapse
Be sure in settings on your device, that you have USB debugging enabled..
With your device idle on home screen.. NOT connected to your computer..
Install these drivers >> https://docs.google.com/file/d/0B67RS0BDBp_ibVFWVUluVHNpaG8/edit?usp=docslist_api
Then reboot your computer..after computer is rebooted and at idle..then plug in your device via USB to computer..give Windows time to tell you the device is ready to be used..
Sent from my 4.4_19.6.3
(Unlocked) XT1080M Droid Maxx #2
http://waynekent.com/page6.html
NWKENT said:
Be sure in settings on your device, that you have USB debugging enabled..
With your device idle on home screen.. NOT connected to your computer..
Install these drivers >> https://docs.google.com/file/d/0B67RS0BDBp_ibVFWVUluVHNpaG8/edit?usp=docslist_api
Then reboot your computer..after computer is rebooted and at idle..then plug in your device via USB to computer..give Windows time to tell you the device is ready to be used..
Sent from my 4.4_19.6.3
(Unlocked) XT1080M Droid Maxx #2
http://waynekent.com/page6.html
Click to expand...
Click to collapse
i already had motorola device manager, just the logo was not red. i uninstalled it and than rebooted and than followed your steps.
and i got this: device driver software was not successfully installed.
on w8 it works without any drivers.
in device manager motorola ADB interface and MTP is lacking drivers.
any other tip?
now the motorola manager updated and the only missing driver is MTP..
ManBearrrPig said:
i already had motorola device manager, just the logo was not red. i uninstalled it and than rebooted and than followed your steps.
and i got this: device driver software was not successfully installed.
on w8 it works without any drivers.
in device manager motorola ADB interface and MTP is lacking drivers.
any other tip?
now the motorola manager updated and the only missing driver is MTP..
Click to expand...
Click to collapse
Ew motorola manager sucks lol . Uninstall all motorola files previously installed and install this .
ManBearrrPig said:
i already had motorola device manager, just the logo was not red. i uninstalled it and than rebooted and than followed your steps.
and i got this: device driver software was not successfully installed.
on w8 it works without any drivers.
in device manager motorola ADB interface and MTP is lacking drivers.
any other tip?
now the motorola manager updated and the only missing driver is MTP..
Click to expand...
Click to collapse
Must be using WinXP.?
Sent from my 4.4.3_21.23.4
(Unlocked) XT1045 Moto G 4G LTE
http://waynekent.com/page6.html
eg0097 said:
Ew motorola manager sucks lol . Uninstall all motorola files previously installed and install this .
Click to expand...
Click to collapse
i have windows 7 32bit
NWKENT said:
Must be using WinXP.?
Sent from my 4.4.3_21.23.4
(Unlocked) XT1045 Moto G 4G LTE
http://waynekent.com/page6.html
Click to expand...
Click to collapse
i have windows 7 32 bit.
ManBearrrPig said:
i have windows 7 32bit
Click to expand...
Click to collapse
eg0097 said:
Click to expand...
Click to collapse
how should i install this?
manbearrrpig said:
how should i install this?
Click to expand...
Click to collapse
whoops wrong file sorry! Lol
eg0097 said:
whoops wrong file sorry! Lol
Click to expand...
Click to collapse
when i installed your driver it said that i am missing windows media player. i dont have it because i have w7 N version which does not include it. i knew that, but i did not know that i need it to transfere files from android...
thank you guys for your help.
I LOVE XDA :highfive:
even i am facing the same issue ever since i formatted my win XP sp2 32bit PC its not detecting my motorola phones. I have tried many things please help.
Sorry i'm late ... you solved?
on xp sp2 you:
-Update to sp3
-Uninstall the windows media player "oem"
-install windows media player 11
-install the motorola driver.
you should solve
Related
Hi,
I updated my moto g(xt1033) to kitkat as soon as i got the phone .
most of the time i use airdroid to transfer files . But recently when i tried to connect via MTP mode the device was not detected . It was neither detected in camera mode .
In the device manager its showing an error .
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
Please help .
+1
same problem here. though i got adb to work with win 8.1
reversegear said:
+1
same problem here. though i got adb to work with win 8.1
Click to expand...
Click to collapse
Install Motorola drivers
https://motorola-global-en-uk.custhelp.com/app/answers/prod_detail/a_id/96456/p/30,6720,9050
robin0800 said:
Install Motorola drivers
https://motorola-global-en-uk.custhelp.com/app/answers/prod_detail/a_id/96456/p/30,6720,9050
Click to expand...
Click to collapse
tried that still not working
reversegear said:
tried that still not working
Click to expand...
Click to collapse
+1 tried not working .
For me works like a charm, check your drivers installation.
abcduploader said:
+1 tried not working .
Click to expand...
Click to collapse
You need to disable some driver enforcement business in Windows 8.1 before you can install the drivers.
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Refer to the above link, after restarting, install Moto Drivers again. (http://download.clockworkmod.com/drivers/MotoHelper_2.1.32_Driver_5.4.0.exe)
Let me know.
Windows 8.1 installs Microsoft USB drivers which won't allow you to use the phone even if you install drivers. You must search for your original USB drivers and install them instead of the windows 8.1 ones.
Sent from my XT1032 using xda app-developers app
You might need some RNDIS drivers.
Try a factory reset. Worked for me.
My Moto G (XT1033) was working with some bugs to connect on Win 8.1 before the kit kat. After the update has stopped completely. I did a factory reset and everything is fine now.
I had the same issue, and this is how I fixed it.
The easiest way was to enable developers mode on the moto g (go to about phone, and tap on build number 7 times)
Now, developer options should appear in the settings menu. Enable USB debugging in the developer options, that's it!
This should help windows 8.1 recognise your phone.
As I side note, I have not installed any drivers.
Good luck!
Sent from my XT1033 using Tapatalk
Install windows media player your problem is solved
abcduploader said:
Hi,
I updated my moto g(xt1033) to kitkat as soon as i got the phone .
most of the time i use airdroid to transfer files . But recently when i tried to connect via MTP mode the device was not detected . It was neither detected in camera mode .
In the device manager its showing an error .
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
Please help .
Click to expand...
Click to collapse
Install windows media pack. I guess You are using windows 8.1 pro n. Installing windows media pack will solve your problem enjoy
cypherhonk said:
Install windows media pack. I guess You are using windows 8.1 pro n. Installing windows media pack will solve your problem enjoy
Click to expand...
Click to collapse
very very thank you man... its worked ....
Good morning, please is possible that after monthes of birth for this phone aren't these drivers? please, anyone has the way for doing this? thanks
myabc said:
Good morning, please is possible that after monthes of birth for this phone aren't these drivers? please, anyone has the way for doing this? thanks
Click to expand...
Click to collapse
It's no Moto G-problem, it's Windows 8.1. This worked for me. But you have to connect your phone to an USB 2.0-port.
Firetribe said:
It's no Moto G-problem, it's Windows 8.1. This worked for me. But you have to connect your phone to an USB 2.0-port.
Click to expand...
Click to collapse
i have not intel driver installed and i don't understand from where i have to start.
i ask you please:
1. is this guide even for me that i haven't intel device motherboard?
2. from where i must start? (there is not indication for step numbers in that guide
thanks
This worked for me!
myabc said:
Good morning, please is possible that after monthes of birth for this phone aren't these drivers? please, anyone has the way for doing this? thanks
Click to expand...
Click to collapse
This worked for me!
After you install this, it'll have two programs listed in control panel. Motorolla Mobile Drivers Installation & Motorolla Device Manager.
You can safely remove motorolla device manager and have the drivers
If @deej_roamer's advice didn't already do the job:
It doesn't matter which mainboard you have, what matters is the manufacturer of your USB-Port. If in device manager you have the mentioned Intel(R) USB 3.0 eXtensible Host Controller, then you have to change drivers to get fastboot working. At least, that was the case for me.
You can start in the guide with this passage:
Code:
Install your default device drivers (For HTC, Install the HTC Sync Manager, For Sony, Use the ones you got in flashtool, etc)
If you are using Windows 8.1, use this for HTC drivers.
deej_roamer said:
This worked for me!
After you install this, it'll have two programs listed in control panel. Motorolla Mobile Drivers Installation & Motorolla Device Manager.
You can safely remove motorolla device manager and have the drivers
Click to expand...
Click to collapse
thanks... finally works for me, too
Hi all, i currently have a Moto G 16GB [4.4.3 KK] Stock rom Retail.US,
im trying to Conect my in Fastboot mode in my PC [XP SP3] But it cant
find the drivers to connect it.
i already have try with these:
http://forum.xda-developers.com/showthread.php?t=2588979
http://forum.xda-developers.com/nexus-s/general/tutorial-n00bs-install-drivers-windows-t1901617
and always the same result ''Fastboot Falcon S Can't be installed''
I install the last Motorola Device Manager, and it works fine with the cellphone
in MTP Mode, but in Fastboot Mode it doesn't.
And without this driver i cant install any room, or root my moto g.
Anybody know how to install this driver?
i really need help, please.
Settings > About phone - repeatedly tap build number.
Settings > Developer options > 'USB debugging'
lost101 said:
Settings > About phone - repeatedly tap build number.
Settings > Developer options > 'USB debugging'
Click to expand...
Click to collapse
In USB Debugging says '' Motorola ADB Interface, cant install hardware, the parameter es incorrect''
Where i can find Motorola ADB Interface driver now?
joselopez105 said:
In USB Debugging says '' Motorola ADB Interface, cant install hardware, the parameter es incorrect''
Where i can find Motorola ADB Interface driver now?
Click to expand...
Click to collapse
It's included in Motorola Device Manager. Unsure why you are getting that error, try rebooting computer or reinstalling all drivers.
lost101 said:
It's included in Motorola Device Manager. Unsure why you are getting that error, try rebooting computer or reinstalling all drivers.
Click to expand...
Click to collapse
I fix my adb Motorola dricer , installing a driver for win7 (I'm xp) but it work, so if anyone has the same problem contact me and I will help greatfull .
joselopez105 said:
I fix my adb Motorola dricer , installing a driver for win7 (I'm xp) but it work, so if anyone has the same problem contact me and I will help greatfull .
Click to expand...
Click to collapse
I have the same problem, could you please help me fix mine ..
Regards
newline75 said:
I have the same problem, could you please help me fix mine ..
Regards
Click to expand...
Click to collapse
Yes me too, please
Help with Driver Fastboot Falcon S
Hi there,
I have Motorola XT-1032 Telcel México, but i unlock the bootloader to install GPE edition to avoid all extra apps from motorola, it was running very well since i receive a notification to update to 5.0.1 lolipop so i aceppted to install.
the update was running fine, but when my device restart it doesn´t finish it and stay in the logo at the beggining and still there until battery discharged
so it was bricked
i restart in fastboot mode but can´t flash it again. i use adb devices to see what happened and there is no recognized by android sdk
only windows show "device not specified fastboot falcon s"
Please help me
Moto G XT1032 8GB 2013 version
Windows 7 ultimate 64bits
Windows 8.1 Pro
Emanuel.Rosales said:
Hi there,
I have Motorola XT-1032 Telcel México, but i unlock the bootloader to install GPE edition to avoid all extra apps from motorola, it was running very well since i receive a notification to update to 5.0.1 lolipop so i aceppted to install.
the update was running fine, but when my device restart it doesn´t finish it and stay in the logo at the beggining and still there until battery discharged
so it was bricked
i restart in fastboot mode but can´t flash it again. i use adb devices to see what happened and there is no recognized by android sdk
only windows show "device not specified fastboot falcon s"
Please help me
Moto G XT1032 8GB 2013 version
Windows 7 ultimate 64bits
Windows 8.1 Pro
Click to expand...
Click to collapse
Hi. Everything matches my situation...did you get to solve it? if so please post or send PM. thanks
Unable to boot after unistalling Swift Keyboard - Moto G 1033 lolipop
After unistalling Swift Keyboard app, I wasn't able to use default keyboard. So, I restarted my mobile, which never happened. I see blank screen. I tried Recovery mode, and then Wipe Cache partition as well, but didn't work.
What are my options, to recover my phone, with data, ie contacts, emails, sms, photos, etc.
tia
Shuja
falcon s driver (solved)
joselopez105 said:
Hi all, i currently have a Moto G 16GB [4.4.3 KK] Stock rom Retail.US,
im trying to Conect my in Fastboot mode in my PC [XP SP3] But it cant
find the drivers to connect it.
i already have try with these:
http://forum.xda-developers.com/showthread.php?t=2588979
http://forum.xda-developers.com/nexus-s/general/tutorial-n00bs-install-drivers-windows-t1901617
and always the same result ''Fastboot Falcon S Can't be installed''
I install the last Motorola Device Manager, and it works fine with the cellphone
in MTP Mode, but in Fastboot Mode it doesn't.
And without this driver i cant install any room, or root my moto g.
Anybody know how to install this driver?
i really need help, please.
Click to expand...
Click to collapse
There is no falcon s driver in online, its all fake
Just instal MotorolaDeviceManager its automatically detects 100%:good::good::good:
I have problem with my OPO.
I try to install TWRP 2.8.6.0 but after that my phone doesn't boot. Nothing work. I hold power button for 2 minutes and nothing.
I do everything like in this guide but it doesn't work. http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
I connect my bricked phone and Windows see it "other devices- unknown device"
I done cmd commands, update driver, select Qualcomm 2012/widnows8/qcmdm/ QDLoader 9008 and after that I have error " Windows found driver software for your device but encountered an error while attempting to install it. This device cennot start(Code 10)"
And it is my problem. I stopped at point 2b in the Guide becouse I can't install drivers.
here is video of that. https://drive.google.com/open?id=0B9...G8tbnNES2VZWG8
Please fast help, becouse I really need this phone next weekend.
Please, can someone help me?
Rebeluch said:
Please, can someone help me?
Click to expand...
Click to collapse
when i bricked my oneplus one, i had similar issues. I had to reinstall windows in order to make it work.
hellcat50 said:
when i bricked my oneplus one, i had similar issues. I had to reinstall windows in order to make it work.
Click to expand...
Click to collapse
Do you pluged phone into USB port and computer can't see it?
Do you reinstalled system to Windows XP?
Rebeluch said:
Do you pluged phone into USB port and computer can't see it?
Do you reinstalled system to Windows XP?
Click to expand...
Click to collapse
I used windows 8.1
reinstalled windows 8.1 on a new partition
It's now a long time ago so i can't quite remember what problem exactly i had, but I know that it didn't worked and i reinstalled windows and it worked.
Actually one month after I bought my oneplus one i bricked it
have u tried disable windows driver signature enforcement? becoz after windows 7, driver that doesnt have digital signature are not installed unless u disable the enforcement
MrxSiN said:
have u tried disable windows driver signature enforcement? becoz after windows 7, driver that doesnt have digital signature are not installed unless u disable the enforcement
Click to expand...
Click to collapse
Yes, I do this in Advanced restart options and click F7. And windows still can't see phone.
I bricked my Oneplus One while flashing CM11 via fastboot using manual commands on cmd.
After giving all the commands for fastboot flash, during reboot the phone did not reboot and it just got bricked.
The big issue with the brick is that the phone is not being recognized as QHSUSB_BULK but it is showing as Unrecognised Device ... i am not able to update the drivers to qualcom 2012 the windows is giving an error as "Windows was unable to install your unknown device".
I've turned on the Testing Mode to install unsigned drivers and the gpedit policy to stop windows automatically installing drivers is also enabled. Also i've changed the setting in control panel Devices and printers -> Device Installation Settings to "Let me choose what to do "and "never install driver software from windows update".
Still the problem persists Please HELP Me.
praik96 said:
I bricked my Oneplus One while flashing CM11 via fastboot using manual commands on cmd.
After giving all the commands for fastboot flash, during reboot the phone did not reboot and it just got bricked.
The big issue with the brick is that the phone is not being recognized as QHSUSB_BULK but it is showing as Unrecognised Device ... i am not able to update the drivers to qualcom 2012 the windows is giving an error as "Windows was unable to install your unknown device".
I've turned on the Testing Mode to install unsigned drivers and the gpedit policy to stop windows automatically installing drivers is also enabled. Also i've changed the setting in control panel Devices and printers -> Device Installation Settings to "Let me choose what to do "and "never install driver software from windows update".
Still the problem persists Please HELP Me.
Click to expand...
Click to collapse
Okay,calm down!
Which windows are you using? Are you sure you're not able to boot to fastboot mode?
I'm using windows 8.1 64bit version.
Mr.Ak said:
Okay,calm down!
Which windows are you using? Are you sure you're not able to boot to fastboot mode?
Click to expand...
Click to collapse
When i press power button + vol. up for 10sec the windows recognizes the device but shows it as Unknown Device and then the Driver Update is not being done. What should i do?
praik96 said:
What should i do?
Click to expand...
Click to collapse
Did you even read my question?
Sent from my A0001 using Tapatalk
faced that too a while ago, try to use win 7 ( best is xp ) with driver signature thing off, now google hardbrick opo recovery and u will find a website with the steps along with a mi flaasher tool for windows , now download the color os hradbrick recovery zip and also the latest cos 13.1.2 fastboot zip.
U willl eb able to bring back ur opo to life by using that color os zip along with the mi flasher tool but then the screeen behaves really weird ( happened to me )
but everything got normal after i flashed the cos 13.1.2 zip by fastboot
Kartike said:
faced that too a while ago, try to use win 7 ( best is xp ) with driver signature thing off, now google hardbrick opo recovery and u will find a website with the steps along with a mi flaasher tool for windows , now download the color os hradbrick recovery zip and also the latest cos 13.1.2 fastboot zip.
U willl eb able to bring back ur opo to life by using that color os zip along with the mi flasher tool but then the screeen behaves really weird ( happened to me )
but everything got normal after i flashed the cos 13.1.2 zip by fastboot
Click to expand...
Click to collapse
That's why I was asking him about which windows he use.Windows XP is hassle free for this driver's issue.
Sent from my A0001 using Tapatalk
Mr.Ak said:
That's why I was asking him about which windows he use.Windows XP is hassle free for this driver's issue.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I'm using windows 8.1, earlier i mentioned it in the title.
praik96 said:
I'm using windows 8.1, earlier i mentioned it in the title.
Click to expand...
Click to collapse
find a Xp system and you'll not have any issues.
Sent from my A0001 using Tapatalk
Mr.Ak said:
find a Xp system and you'll not have any issues.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
If i install xp on my laptop via dual boot and what drivers will i need other than Qualcom 2012 ? or the xp's inbuilt windows driver will do the trick along with Qualcom 2012 drivers?
praik96 said:
If i install xp on my laptop via dual boot and what drivers will i need other than Qualcom 2012 ? or the xp's inbuilt windows driver will do the trick along with Qualcom 2012 drivers?
Click to expand...
Click to collapse
Yes qualcomm 2012 drivers will work just fine.
Make sure you launch the tool with administrator rights.It may take a few refresh and try before flashing starts but it works.
You don't need adb drivers here because this tool uses usb debugging port instead of fastboot/adb.
Sent from my A0001 using Tapatalk
You should download One Plus USB drivers.
If you prefer you should use One Plus Toolkit.
Mr.Ak said:
Yes qualcomm 2012 drivers will work just fine.
Make sure you launch the tool with administrator rights.It may take a few refresh and try before flashing starts but it works.
You don't need adb drivers here because this tool uses usb debugging port instead of fastboot/adb.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Can anyone direct me to safest way to dual boot windows xp s3 on windows 8.1 already installed with UEFI mode?
I dont want to end up with screwing my laptop too.
praik96 said:
Can anyone direct me to safest way to dual boot windows xp s3 on windows 8.1 already installed with UEFI mode?
I dont want to end up with screwing my laptop too.
Click to expand...
Click to collapse
Youtube
Sent from my A0001 using Tapatalk
Mr.Ak said:
Yes qualcomm 2012 drivers will work just fine.
Make sure you launch the tool with administrator rights.It may take a few refresh and try before flashing starts but it works.
You don't need adb drivers here because this tool uses usb debugging port instead of fastboot/adb.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Tip1: Use correct usb cable.
I thought the error was is usb drivers but it seems that the error was in usb cable. I lost my oneplus usb cable quite a while ago and was using third party usb cable for data transfer and charging. Tried to connect the bricked OPO with that cable only.
Just ought to try connected with different cable here used Amazon Basics micro usb cable and VOILA!!! The drivers were automatically installed by windows this time.It worked on current windows 8.1. Dont know it was luck or really dumb choice of USB cable.
But thank you very much for helping me out.