Looking to tweak Fauxs Kernel for what I want and Im not sure which defconfig to use for the Verizon version. Does anyone know which one? ty in advance
EDIT: I dont see the m8wl defconfig so will the sprint one work?
Related
For Cyanogenmod 5 test builds
Kernel version 2.6.29.6 ToastCFH
Following up this thread: http://forum.xda-developers.com/showthread.php?t=685613
Very experimental and untested at the moment. This kernel was new for GSM Hero, and I just tweaked the config a little bit because the GSM Hero kernel has had a history of being able to run on 32A Magics with new radio.
Radio 6.35 series is needed to boot this (in theory)
It would be same as this config without perflock: http://pastebin.com/cKkBNtKJ
Compiled wlan.ko using CM5 kernel and ROM sources
Packed via Koush Anykernel in case you want to experiment.
Threw in OC+UV for good measure. SetCPU would work if this thing even boots.
CONFIG_LOCALVERSION="-cyanogenmod" so that CM5 can even possibly boot?
Edit: It's up now
What are the OC freq? Btw gj
OC freq are not important at the moment. I would like to know if this even boots.
Basically no overclock unless explicitly enabled. That's the last thing I'm worried about right now.
xaueious said:
OC freq are not important at the moment. I would like to know if this even boots.
Basically no overclock unless explicitly enabled. That's the last thing I'm worried about right now.
Click to expand...
Click to collapse
will let you know in 5-10 minutes
no response on boot when flashed over test 6 on new radio ;(
no logcat either came through...
Can someone look at the .config and see if there might be anything wrong with it?
http://pastebin.com/cKkBNtKJ
For comparison:
Cursorsense config
http://github.com/cursordroid/HTC-CCR-Kernel/blob/master/kernel-2.6.27/CCR32A-0.2a-config
Unmodded GSM Hero .29 config:
http://github.com/toastcfh/CdMa-HeRoC-2.6.29/blob/master/.config
xaueious said:
Can someone look at the .config and see if there might be anything wrong with it?
http://pastebin.com/cKkBNtKJ
For comparison:
Cursorsense config
http://github.com/cursordroid/HTC-CCR-Kernel/blob/master/kernel-2.6.27/CCR32A-0.2a-config
Unmodded GSM Hero .29 config:
http://github.com/toastcfh/CdMa-HeRoC-2.6.29/blob/master/.config
Click to expand...
Click to collapse
maybe ask bcrook or pershoot to see if they have any input
I'll try this myself when I get a chance.
Doesn't look like there's anything missing...
Should at least get a logcat.
xaueious said:
I'll try this myself when I get a chance.
Doesn't look like there's anything missing...
Should at least get a logcat.
Click to expand...
Click to collapse
you forgot the eabi1 option for 32a
carz12 said:
you forgot the eabi1 option for 32a
Click to expand...
Click to collapse
Yeah, I think you're right, but that might not be the case for these kernels, depending on how they're originally designed to boot. It might have the EBI1=y config "implied" in the source already.
Worth a shot, but add these lines
CONFIG_MSM_AMSS_VERSION=6355
CONFIG_MSM_AMSS_VERSION_6355=y
CONFIG_MSM_AMSS_SUPPORT_256MB_EBI1=y
in the kernel config.
Is mkbootimg offset the same for new radio as it was for the old one? Might give this kernel a shot later...
cursordroid said:
Yeah, I think you're right, but that might not be the case for these kernels, depending on how they're originally designed to boot. It might have the EBI1=y config "implied" in the source already.
Worth a shot, but add these lines
CONFIG_MSM_AMSS_VERSION=6355
CONFIG_MSM_AMSS_VERSION_6355=y
CONFIG_MSM_AMSS_SUPPORT_256MB_EBI1=y
in the kernel config.
Click to expand...
Click to collapse
The EBI1 option was added by a community dev. I'm sure this isn't a config option right now.
The kernel boots on the GSM Hero already, so shouldn't it boot the same for 32A Magic? GSM Hero implies 256MB support.
Something else missing?
mkbootimg is same for these kernels. If we use Koush AnyKernel there's no need to even go there.
Cursordroid can you give us the gist of your experience with mixing GSM Hero ROMs on 32A new radio?
Has anyone used Franko Kernel updater on their GS3? If so, any issues?
Also, which kernels have you use?
I'm pretty sure the Franco Kernel doesn't work on the GS3.
Sent from CNA
RCOVA said:
I'm pretty sure the Franco Kernel doesn't work on the GS3.
Sent from CNA
Click to expand...
Click to collapse
Thanks! I looked like a pretty smooth app, so I figured it was worth checking to see if anyone had gotten it to work.
Thanks again!
Wondering if anyone has made a repo for this phone?
powerpoint45 said:
Wondering if anyone has made a repo for this phone?
Click to expand...
Click to collapse
Do you mean a github repo?
I have a wip kernel port to 2.6.35.7, but it still doesn't boot yet. So it wouldn't be very helpful. There is a bali 2.6.32.9(?) floating around somewhere. But I'm sure you can find it by searching the forum.
bhundven said:
Do you mean a github repo?
I have a wip kernel port to 2.6.35.7, but it still doesn't boot yet. So it wouldn't be very helpful. There is a bali 2.6.32.9(?) floating around somewhere. But I'm sure you can find it by searching the forum.
Click to expand...
Click to collapse
Yeah thats what I mean. I guess the only thing that matters for the ROM to work is the kernel. Right? That would mean I could build a ROM from a different repo and then just flash the kernel? And would the kernel work for ICS or JB? Thanks
And im guessing your talking about http://forum.xda-developers.com/showthread.php?t=1663622
Sent from my Galaxy Nexus using xda app-developers app
Has anyone updated koush's AnyKernel to work for our device yet?
The one I used on the S3 was device specific, just want to make sure I don't brick anything by flashing to wrong partitions.
Sent from my Nexus 5 using Tapatalk 2
every kernel is device specific. there may be device variants, but they only work for each particular model. there are plenty of great kernels here. look 'em up and enjoy. cheers.
xBeerdroiDx said:
every kernel is device specific. there may be device variants, but they only work for each particular model. there are plenty of great kernels here. look 'em up and enjoy. cheers.
Click to expand...
Click to collapse
Thanks for the reply, but I think you may have misunderstood
AnyKernel itself isn't a kernel, its a tool for packaging the zImage from a kernel you've built into a flashable zip
Sent from my Nexus 5 using Tapatalk 2
Rxpert said:
Thanks for the reply, but I think you may have misunderstood
AnyKernel itself isn't a kernel, its a tool for packaging the zImage from a kernel you've built into a flashable zip
Sent from my Nexus 5 using Tapatalk 2
Click to expand...
Click to collapse
:good: copy that. thanks
Bump...
I doubt any developers check this section of the forum
Is there an AnyKernel template for the Nexus 5?
Is there an AnyKernel template for the Nexus 5?
cbdonohue said:
Is there an AnyKernel template for the Nexus 5?
Click to expand...
Click to collapse
?
a few nexus 5 kernels use anykernel..
simms22 said:
?
a few nexus 5 kernels use anykernel..
Click to expand...
Click to collapse
Yea, but I only see kernel flashable zips that also change the ramdisk. AnyKernel is supposed to only replace the zImage for the kernel.
cbdonohue said:
Yea, but I only see kernel flashable zips that also change the ramdisk. AnyKernel is supposed to only replace the zImage for the kernel.
Click to expand...
Click to collapse
trinity kernel is an aosp/stock compatible n5 anykernel http://goo.gl/IO9KNZ
simms22 said:
trinity kernel is an aosp/stock compatible n5 anykernel http://goo.gl/IO9KNZ
Click to expand...
Click to collapse
Apologies for bringing this post back up/asking a potentially stupid question- can this template still be used for Lollipop kernels?
sooooo my mum bought new phone and her old gt-s7500 is lying around not used. i want to play with it and probably compile custom kernel. so anyone wants custom gb kernel?
mdfzhi said:
sooooo my mum bought new phone and her old gt-s7500 is lying around not used. i want to play with it and probably compile custom kernel. so anyone wants custom gb kernel?
Click to expand...
Click to collapse
I think that it would appreciated :good:
anyone wants the gb custom kernel can pm me.
i'm using mb-14 source as base, overclockable upto 1,2ghz, i've backported interactive governor from kernel 3.4, added custom gpu table, added dynamic fsync, added logger control, compiled using gcc 4.4.3 with correct arm cortex-a5 for ace plus. 50mb zram. tested and running fine for two days now, stable and no reboot.
Could you give me a link to mb-14's sources? I can't seem to find traces of any GB kernel anywhere, even in Samsung's site. This could help me in building a new stable 3.4 kernel.
Thanks!
Liam D. said:
Could you give me a link to mb-14's sources? I can't seem to find traces of any GB kernel anywhere, even in Samsung's site. This could help me in building a new stable 3.4 kernel.
Thanks!
Click to expand...
Click to collapse
Are these?
AndroidVin said:
Are these?
Click to expand...
Click to collapse
Specifically, this, but thanks for the direction!
Liam D. said:
Specifically, this, but thanks for the direction!
Click to expand...
Click to collapse
glad to help a great developer like you ......good work, I will wait your next build, hoping that the kernel panic bug will be solved :fingers-crossed: