HI,
I recently reinstalled stock rom on my p905 and after that my Samsung keyboard force closes. Could someone help me reinstall it? I have custom recovery. Is it possible to install it through apk or by flashing zip? Could someone point me where to find it?
I would be greatfull for help
http://forum.xda-developers.com/showthread.php?t=2721077
ddavtian said:
http://forum.xda-developers.com/showthread.php?t=2721077
Click to expand...
Click to collapse
Sorry Sir, but I made everything that is written here and checked 3 times,still it doesn't work. I even tried to load Note 10.1 keyboard and It doesn't work also.
I can add that I had problem with reinstalling stock rom. At the end it showed "odin: invalid ext4 image". I tried to load rom from different site it was the same. I also tried to load rom from different region, same. System didn't star at first, but after loading CF autoroot it started. Can it be connected? System works flawless, the only problem is keyboard. I really like stock samsung keyboard and would like to keep it.
Does someone have any ideas?
I would really appreciate help.
Thank You.
MLodyXX said:
Sorry Sir, but I made everything that is written here and checked 3 times,still it doesn't work. I even tried to load Note 10.1 keyboard and It doesn't work also.
I can add that I had problem with reinstalling stock rom. At the end it showed "odin: invalid ext4 image". I tried to load rom from different site it was the same. I also tried to load rom from different region, same. System didn't star at first, but after loading CF autoroot it started. Can it be connected? System works flawless, the only problem is keyboard. I really like stock samsung keyboard and would like to keep it.
Does someone have any ideas?
I would really appreciate help.
Thank You.
Click to expand...
Click to collapse
Did you try updating the Samsung drivers in Kies3.0? Maybe try that if you havent, then re-odin.
Sent from my SM-P900 using Tapatalk
digichris said:
Did you try updating the Samsung drivers in Kies3.0? Maybe try that if you havent, then re-odin.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
THank You for Your reply.
I tried to reinstall drivers in kies before reflashing in odin... didn't change a thing...
Do You have any other ideas?
Safe to assume you did a factory reset after reinstalling the stock ROM?
muzzy996 said:
Safe to assume you did a factory reset after reinstalling the stock ROM?
Click to expand...
Click to collapse
Sure full wipe, dalvik, sd everything...
Md5 check the files you are flashing to make sure they aren't corrupt...thats all I got for ya on this issue
Good Luck!
Sent from my SGH-I317 using Tapatalk
digichris said:
Md5 check the files you are flashing to make sure they aren't corrupt...thats all I got for ya on this issue
Good Luck!
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Checked...
I have found the cause of my problems. I'm writting it here maybe it will help someone.
Some stock roms for p905 that can be found on sammobile and samsung firmware sites have issues. I have chacked polish and british roms and they have "odin: invalid ext4 image" error (the consequence of it is samsung keybord not working, force closes), Now I have installed rom from greece, it's flawless
Thank You for Your help.
Related
Hello guys,
I just got my Samsung Galaxy Tab 2 7.0 and wanted to mess around with it and root it. I thought I did everything correctly - it won't let me post the site I used .
However, now I am in a pickle. Whenever I start my SGT, it gets to the Samsung loading screen, does the intro tune, and then just starts all over again. I tried doing a hard reset and I tried wiping all of the cache/saved files/etc. but nothing seems to work. I am at a loss as to what I can do. Has anyone seen this before or is there a way around it? Is there anything I can do?
Much Appreciated,
Sam
royalmessup said:
Hello guys,
I just got my Samsung Galaxy Tab 2 7.0 and wanted to mess around with it and root it. I thought I did everything correctly - it won't let me post the site I used .
However, now I am in a pickle. Whenever I start my SGT, it gets to the Samsung loading screen, does the intro tune, and then just starts all over again. I tried doing a hard reset and I tried wiping all of the cache/saved files/etc. but nothing seems to work. I am at a loss as to what I can do. Has anyone seen this before or is there a way around it? Is there anything I can do?
Much Appreciated,
Sam
Click to expand...
Click to collapse
What os did you flash? Can you boot to recovery and flash something more stable like CM9 with odin?
Gamer819 said:
What os did you flash? Can you boot to recovery and flash something more stable like CM9 with odin?
Click to expand...
Click to collapse
I am not entirely too sure, to be honest - I wish it would be let me post the site I used haha.
I used the below ClockworkMod Recovery:
imnuts’ CWM Recovery image
I downloaded the developer nycbjr’s rooting package - cwm-root-gtab2.zip
Does that answer your question?
Kinda. Did you just want root or a custom firmware as well? I am am running the CM9 and I'm very pleased with it. :good: Not as flashy as the stock but it is a performer.
Gamer819 said:
Kinda. Did you just want root or a custom firmware as well? I am am running the CM9 and I'm very pleased with it. :good: Not as flashy as the stock but it is a performer.
Click to expand...
Click to collapse
Honestly, I am not even 100% sure why I did it. I was browsing the Android Market and got some apps I liked. The issue arose when I tried using them it requested that I have root powers - I wasn't really trying to modify the os or anything like but was just looking to get root powers. If I hook up my phone to my laptop and put it into Recovery Mode and run Odin, can I PDA the CM9? Do you think that would help? Is there anyway to reset it through Odin? When I do a hard reset, literally nothing changes.
Please post the link to the root method you used. I have a hunch you tried to flash a zip for the gtab 10.1.
MultipleMonomials said:
Please post the link to the root method you used. I have a hunch you tried to flash a zip for the gtab 10.1.
Click to expand...
Click to collapse
The below is the root zip I used: cwm-root-gtab2.zip
mediafire.com/?kjb0rg9bs87p2ma
It won't let me post the site I used so I am going to break it up into a few strings.
androidauthority. com/ galaxy-tab-2-7-0-p3113-root-clockworkmod-recovery-96474/
I meant the root guide you used.
MultipleMonomials said:
I meant the root guide you used.
Click to expand...
Click to collapse
Yea, I can't post links in the forum yet, so... . The link above(broken up one), the android authority one, is where I found the root guide.
Can you access CWM recovery? BTW, you can post links if you uncheck "automatically parse links". Also, you don't have to email me, PM me, AND post here-- one of those will suffice.
MultipleMonomials said:
Can you access CWM recovery? BTW, you can post links if you uncheck "automatically parse links". Also, you don't have to email me, PM me, AND post here-- one of those will suffice.
Click to expand...
Click to collapse
I can access CWM recovery. However, none of the options in there seem to really do anything.
Edit: Yea, my apologies on that. I was trying to e-mail you the link and I didn't get a sent confirmation and it said I had nothing in my sent messages so I tried PMing you and the same thing happened. I'll stick to the forums so everyone can see this as it may help people, I just didn't know there was a way around the link . My bad.
It's fine. Back to work, what you call a soft bricked tab is what I call an opportunity to flash a new ROM. I'm a tab 10.1 guy so I can't recommend a specific ROM. But I've heard good things about Tab2Lite and CM9.
Sounds exactly like this problem.
http://forum.xda-developers.com/showthread.php?t=1809239
Won't boot. Bootloader or kernel problem?
Sent from my GT-P3113 using Tapatalk 2
MultipleMonomials said:
It's fine. Back to work, what you call a soft bricked tab is what I call an opportunity to flash a new ROM. I'm a tab 10.1 guy so I can't recommend a specific ROM. But I've heard good things about Tab2Lite and CM9.
Click to expand...
Click to collapse
I'm glad to hear there is a chance my birthday day present won't become a paper weight. I am still a little new to this stuff so I wanna make sure I am on the same page as you. The ROM that I used was cwm-root-gtab2, correct? I had to download a bunch of files and I am trying to make sense out of what is what. Now, when you said I need to get a new ROM, would that consist of me putting a new ROM on the external SD and then running that?
royalmessup said:
I'm glad to hear there is a chance my birthday day present won't become a paper weight. I am still a little new to this stuff so I wanna make sure I am on the same page as you. The ROM that I used was cwm-root-gtab2, correct? I had to download a bunch of files and I am trying to make sense out of what is what. Now, when you said I need to get a new ROM, would that consist of me putting a new ROM on the external SD and then running that?
Click to expand...
Click to collapse
Could one of you clear one thing up for me. I am going to try and use Odin again but with a different espresso file as I think that was the problem. I am just unsure which espresso file to use, how do I tell which one I need.
From:
http://rootzwiki.com/topic/25228-how-to-rooting-gt-p3113-step-by-step-updated-07182012/
Dralanmage said:
Sounds exactly like this problem.
http://forum.xda-developers.com/showthread.php?t=1809239
Won't boot. Bootloader or kernel problem?
Sent from my GT-P3113 using Tapatalk 2
Click to expand...
Click to collapse
Hey guys, I want to thank both of you for your help! I was able to reset my tab and it now works. It looks like I used the wrong espresso file . If possible, I would still love for an explanation of my above question - just so I know for the future. But other than that, thank you for both!
royalmessup said:
Hey guys, I want to thank both of you for your help! I was able to reset my tab and it now works. It looks like I used the wrong espresso file . If possible, I would still love for an explanation of my above question - just so I know for the future. But other than that, thank you for both!
Click to expand...
Click to collapse
Basically if your tab is on the latest firmware image, you need the latest espresso file. I'm guessing that you were on 4.0.4 and the espresso file you first flashed was for 4.0.3. That happened to myself and a few other people as it's not really clear what you need in those guides!
Sent from my Galaxy Nexus using Tapatalk 2
I just installed the cyanogen 10 mod to my blaze and tried it. i went to this file manager that told me to reroot my phone so that I may be able to use it better. I went to odin to reroot it again but i accidentally used the original blaze.pit file on it and when it rebooted it showed me the original samsung starter instead of the cyanogen mod starter. That wasn't the problem, the problem was it never went in to the phones home screen or apps. Instead it continues to show the samsung logo and the flying android over and over again. I tried using the SGH-T769-hitsquad tar file to fix it (i need to mention that i bricked it once before and used this tar file to fix it) but it keeps taking me to the samsung logo. I can't even try to factory restore it because it just starts acting strange when I go to the menu. I can still go into download mode, i've gone searching for a file or anything to help me fix it but i can't find anything. Please, any suggestions?!
Here's a link to stock Tmo Blaze tar's from GB to ICS. ICS is the UVLH5 file. I suggest download that one.. then flash that file through odin.. dont include a Blaze pit file. just PDA file which is the one you'll download.
EDIT:
They're the ones ontop of the page that says Firmwares for SGH-T769 - USA (T-Mobile)
Let me know if it works for you.
EDIT:
They're the ones ontop of the page that says Firmwares for SGH-T769 - USA (T-Mobile)
Let me know if it works for you. [/QUOTE]
Had to factory reset it and wipe the catches, but it worked in the end. THANK YOU !!
EDIT:
They're the ones ontop of the page that says Firmwares for SGH-T769 - USA (T-Mobile)
Let me know if it works for you.
Click to expand...
Click to collapse
Also, i want to know if i can still root it again?
crzye101234 said:
Also, i want to know if i can still root it again?
Click to expand...
Click to collapse
Yeah, all you need is to reflash cwm through odin or if you still have cwm just flash a superuser or supersu zip.
crzye101234 said:
Also, i want to know if i can still root it again?
Click to expand...
Click to collapse
Yeah. Just Odin reflash CWM. then flash the superuse.zip
anactoraaron said:
Yeah, all you need is to reflash cwm through odin or if you still have cwm just flash a superuser or supersu zip.
Click to expand...
Click to collapse
Which superuser.zip should i use?
This thread should help you.
Just use that superuser.zip file, unless you want SuperSU, which I think it's better,
unicorndust98 said:
This thread should help you.
Just use that superuser.zip file, unless you want SuperSU, which I think it's better,
Click to expand...
Click to collapse
alright, i flashed the super user but now my phone keeps getting slowed down and when it locks it won't turn on the screen for a while then everything just resets. it also freezes when starting. What happened now?
or do i have to wipe the caches and data again?
nvm, i did have to factory restore it. Thank you for the help
crzye101234 said:
alright, i flashed the super user but now my phone keeps getting slowed down and when it locks it won't turn on the screen for a while then everything just resets. it also freezes when starting. What happened now?
or do i have to wipe the caches and data again?
nvm, i did have to factory restore it. Thank you for the help
Click to expand...
Click to collapse
Yeah.. after EVERY PROBLEM... I'd recommend nandroiding, then wiping stuff.. if that doesn't help.. THEN start to ask. Glad I could help.
Sent from my SGH-T769 using xda app-developers app
Hi,
I have a Korean SM-P900 that I tried to root with CF AutoRoot using Heimdall. I identified the recovery and cache partitions using print-pit, then flashed the recovery.img and cache.img to their respective partitions. After that it started booting, and was stuck at the Samsung screen for several minutes.
I then rebooted it by holding down the power button. When it was booting back up, it showed a message in Korean and with a counter that counted up to 79, then showed a similar message counting up to another number. It kept doing that no matter what, never booting up, even if I rebooted it again.
After that I tried flashing it again the same way. Now it shows the same message as earlier, but actually boots into the Samsung initial setup screen. However, I can't get past it, because a message showing "MyScript ResourceManager", followed by some Korean text, blocks me from doing anything, and if I hit okay it just reappears.
Any ideas on how to unbrick it?
Try going into recovery and do a Full reset. If that doesn't work, download the Korean firmware (or whichever version you want, as long as it is SM-P900) and flash back to stock using Odin. Messing with partitions using Heimdall can be tricky and dangerous if you don't have a PIT file for your device. Hope this works for you.
Sent from my SM-P900 using Tapatalk
dodo99x said:
Try going into recovery and do a Full reset. If that doesn't work, download the Korean firmware (or whichever version you want, as long as it is SM-P900) and flash back to stock using Odin. Messing with partitions using Heimdall can be tricky and dangerous if you don't have a PIT file for your device. Hope this works for you.
Click to expand...
Click to collapse
Going into recovery and doing a reset fixed the problem. Thank you very much!
The reason I didn't flash back to stock earlier was because I couldn't find the Korean stock firmware anywhere, and I was unsure if I could flash another country's firmware to it without breaking something. Nice to know that I can.
Now that it's functional again, will it be okay to try to root it again, this time using Odin?
sm-p900user said:
Going into recovery and doing a reset fixed the problem. Thank you very much!
The reason I didn't flash back to stock earlier was because I couldn't find the Korean stock firmware anywhere, and I was unsure if I could flash another country's firmware to it without breaking something. Nice to know that I can.
Now that it's functional again, will it be okay to try to root it again, this time using Odin?
Click to expand...
Click to collapse
Yes, flashing another region is ok, but you may have issues with keyboard languages and wifi channels being different. Yeah just use Odin for CF-Autoroot. You can download a recovery image to flash if it gets stuck on cache.img. It's in the cf-autoroot thread for the 12.2. Best to read the entire thread before you start. Good luck.
Sent from my SM-P900 using Tapatalk
dodo99x said:
Yes, flashing another region is ok, but you may have issues with keyboard languages and wifi channels being different. Yeah just use Odin for CF-Autoroot. You can download a recovery image to flash if it gets stuck on cache.img. It's in the cf-autoroot thread for the 12.2. Best to read the entire thread before you start. Good luck.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
I have now rooted my tablet, and it's working great. Thank you very much for your help!
sm-p900user said:
I have now rooted my tablet, and it's working great. Thank you very much for your help!
Click to expand...
Click to collapse
so towelroot doesnt work for this device?
torreon901 said:
so towelroot doesnt work for this device?
Click to expand...
Click to collapse
Towelroot is only for Qualcomm based devices. SM-P900 uses an Exynos SOC.
Sent from my SM-P900 using Tapatalk
Hi Guys,
I was using SlimKat 4.4 on my galaxy tab. One fine day the tab stopped booting, I tried flashing the original firmware(from sammobile) but it wouldn't flash. Every time I try to flash, I get a message on odin stating that Nand Write complete(failed)
Can someone please help. I've googled around and I've also tried some of the method stated to work. I've bought a new genuine samsung cable for the cause as well. Can someone please point me in the right direction to fix the tabled.
Thanks in advance
Cheers
saviour1108 said:
Hi Guys,
I was using SlimKat 4.4 on my galaxy tab. One fine day the tab stopped booting, I tried flashing the original firmware(from sammobile) but it wouldn't flash. Every time I try to flash, I get a message on odin stating that Nand Write complete(failed)
Can someone please help. I've googled around and I've also tried some of the method stated to work. I've bought a new genuine samsung cable for the cause as well. Can someone please point me in the right direction to fix the tabled.
Thanks in advance
Cheers
Click to expand...
Click to collapse
This could be the dreaded emmc bug . To make sure, can you boot in recovery? If you can, try flashing other roms. If it still boots up with Slim6 and everything intact, it 99% could be the emmc. Only an emmc upgrade or motherboard replacement can fix it.
EDIT: Maybe you could look here http://forum.xda-developers.com/galaxy-tab-2/help/soft-bricked-tab-gt-p3100-t3016879/
Sent from my espresso3g using XDA Labs
Lightracer said:
This could be the dreaded emmc bug . To make sure, can you boot in recovery? If you can, try flashing other roms. If it still boots up with Slim6 and everything intact, it 99% could be the emmc. Only an emmc upgrade or motherboard replacement can fix it.
EDIT: Maybe you could look here http://forum.xda-developers.com/galaxy-tab-2/help/soft-bricked-tab-gt-p3100-t3016879/
Sent from my espresso3g using XDA Labs
Click to expand...
Click to collapse
Hi,
Thanks for the reply.. But i can't boot into recovery. As soon as i boot the screen says "Please connect to kies and reload the software."
saviour1108 said:
Hi,
Thanks for the reply.. But i can't boot into recovery. As soon as i boot the screen says "Please connect to kies and reload the software."
Click to expand...
Click to collapse
Have you tried connecting to kies and doing an emergency firmware recovey?
Sent from my espresso3g using XDA Labs
Lightracer said:
Have you tried connecting to kies and doing an emergency firmware recovey?
Sent from my espresso3g using XDA Labs
Click to expand...
Click to collapse
Yup, It says that my device is not supported for the upgrade. Any other way I can reload the software??
Cheers
Other than odin, I can't think of any other methods of restoring the software. Sorry
Sent from my espresso3g using XDA Labs
Lightracer said:
Other than odin, I can't think of any other methods of restoring the software. Sorry
Sent from my espresso3g using XDA Labs
Click to expand...
Click to collapse
you can try to use heimdall http://forum.xda-developers.com/showthread.php?t=1922461&nocache=1
saviour1108 said:
Hi Guys,
I was using SlimKat 4.4 on my galaxy tab. One fine day the tab stopped booting, I tried flashing the original firmware(from sammobile) but it wouldn't flash. Every time I try to flash, I get a message on odin stating that Nand Write complete(failed)
Can someone please help. I've googled around and I've also tried some of the method stated to work. I've bought a new genuine samsung cable for the cause as well. Can someone please point me in the right direction to fix the tabled.
Thanks in advance
Cheers
Click to expand...
Click to collapse
Either a partition of emmc got corrupted by physical damage(considering the fact samsung shipped these tabs with a cheap card) or worse you erased nand while flashing firmware through Odin (did you check any box in odin yourself?)
if it's the latter case, heimdall would also not work,
tried with odin 1.85? flashed with pit file, and the four firmware files? that would be your last bet, (search google or my guide in the signature) after that it's up to the service centres.
Hello I have samsung tab 2 gtp3100 and I want to install marshmallow
bhat uni said:
Hello I have samsung tab 2 gtp3100 and I want to install marshmallow
Click to expand...
Click to collapse
Wrong thread
Sent from my espresso3g using XDA Labs
Mean
billysam said:
Either a partition of emmc got corrupted by physical damage(considering the fact samsung shipped these tabs with a cheap card) or worse you erased nand while flashing firmware through Odin (did you check any box in odin yourself?)
if it's the latter case, heimdall would also not work,
tried with odin 1.85? flashed with pit file, and the four firmware files? that would be your last bet, (search google or my guide in the signature) after that it's up to the service centres.
Click to expand...
Click to collapse
Thanks. Could you please share the pit file and the link to your guide? Please.
check post 5
Hello
I have a Galaxy S7 and had installed HTC sense Home luncher, installed with an apk file. Accidentaly I errased something so the luncher desapeard.
I have tried installing the apk file again but keep geting the same error: "An existing package by the same name with a conflicting signature is already installed"
I deleted all HTC files from My phone, and have done 2 hard reset and still nothin, same error.
I have tried with the sd card removed and the same.
Please help me I realy love the HTC sens luncher.
Thanks.
robertoaste said:
Hello
I have a Galaxy S7 and had installed HTC sense Home luncher, installed with an apk file. Accidentaly I errased something so the luncher desapeard.
I have tried installing the apk file again but keep geting the same error: "An existing package by the same name with a conflicting signature is already installed"
I deleted all HTC files from My phone, and have done 2 hard reset and still nothin, same error.
I have tried with the sd card removed and the same.
Please help me I realy love the HTC sens luncher.
Thanks.
Click to expand...
Click to collapse
Hi
when you said hard reset you mean factory reset. right?
Do you have a stock or custom rom? which one?
Did you try to uninstall the app from settings? if so and is still giving you the error i would suggest to flash "no wipe" the custom rom again or flash Odin your stock rom again with your home_csc file so you do not lose any info or if you factory reset it just use CSC file and completly wipe and clean your phone
must likely there are orphan files around the system file, after everything is ok ...flash your app again
MAX 404 said:
Hi
when you said hard reset you mean factory reset. right?
Do you have a stock or custom rom? which one?
Did you try to uninstall the app from settings? if so and is still giving you the error i would suggest to flash "no wipe" the custom rom again or flash Odin your stock rom again with your home_csc file so you do not lose any info or if you factory reset it just use CSC file and completly wipe and clean your phone
must likely there are orphan files around the system file, after everything is ok ...flash your app again
Click to expand...
Click to collapse
Thanks for your answer,
Yes I did the hard reset thru recovery mode.
i tried uninstalling the app directly, i flashed a stock rom from sammobile using odin and still the same problem
Please someone help me, Or tell me a god lunches such as HTC sense
Thanks.
robertoaste said:
Thanks for your answer,
Yes I did the hard reset thru recovery mode.
i tried uninstalling the app directly, i flashed a stock rom from sammobile using odin and still the same problem
Please someone help me, Or tell me a god lunches such as HTC sense
Thanks.
Click to expand...
Click to collapse
There is no way any of the old app should be left behind after a full factory reset, it wipes that partition
Flash with ODIN again, but use CSC this time, not HOME_CSC
robertoaste said:
Thanks for your answer,
Yes I did the hard reset thru recovery mode.
i tried uninstalling the app directly, i flashed a stock rom from sammobile using odin and still the same problem
Please someone help me, Or tell me a god lunches such as HTC sense
Thanks.
Click to expand...
Click to collapse
*Detection* said:
There is no way any of the old app should be left behind after a full factory reset, it wipes that partition
Flash with ODIN again, but use CSC this time, not HOME_CSC
Click to expand...
Click to collapse
+1
does not make sense ( no pond intended) factory rest + odin flashing ( even with home_csc) should had taken care of any issues on the system partition and data partition.....
as said before flash again using CSC file during odin flashing
MAX 404 said:
+1
does not make sense ( no pond intended) factory rest + odin flashing ( even with home_csc) should had taken care of any issues on the system partition and data partition.....
as said before flash again using CSC file during odin flashing
Click to expand...
Click to collapse
OK I will try again.
Can someone help me I think I flashed a diferent baseband version than the one I originaly had. I have the SM-G930F but when I look for the firmware on sammobile the list has lots of countries.
can I knoe the original baseband some way? with the IMEI? S/N?
thanks.
robertoaste said:
OK I will try again.
Can someone help me I think I flashed a diferent baseband version than the one I originaly had. I have the SM-G930F but when I look for the firmware on sammobile the list has lots of countries.
can I knoe the original baseband some way? with the IMEI? S/N?
thanks.
Click to expand...
Click to collapse
hi
that should not be an issue unless you have reception problems......
Which one is your country and carrier?
MAX 404 said:
hi
that should not be an issue unless you have reception problems......
Which one is your country and carrier?
Click to expand...
Click to collapse
I live in Chile buy here in chile the Galaxy S7 still is running on android 6.1 and mine updated OTA to 7.0 last wensday
Just install this version it will work >>> 8.01.786968-19161 <<< find it on appkmirror.
Problem that you have is new version of HTC sense that requires HTC framework.
robertoaste said:
I live in Chile buy here in chile the Galaxy S7 still is running on android 6.1 and mine updated OTA to 7.0 last wensday
Click to expand...
Click to collapse
Did you buy the phone in Chile?
Check what is the phone CSC
MAX 404 said:
Did you buy the phone in Chile?
Check what is the phone CSC
Click to expand...
Click to collapse
I do not know how, I downloades another stock rom, flashed with odin with csc file
Still the message continues, signature problem
This don't have anything with rom... you are losing your time flashing... Problem is version of HTC laucher apk... Try version that i' mentioned earlier just works on my phone
robertoaste said:
I do not know how, I downloades another stock rom, flashed with odin with csc file
Still the message continues, signature problem
Click to expand...
Click to collapse
nomaj said:
This don't have anything with rom... you are losing your time flashing... Problem is version of HTC laucher apk... Try version that i' mentioned earlier just works on my phone
Click to expand...
Click to collapse
+1 nomaj
Did you tried what he said?
nomaj said:
This don't have anything with rom... you are losing your time flashing... Problem is version of HTC laucher apk... Try version that i' mentioned earlier just works on my phone
Click to expand...
Click to collapse
Perfet, these worked i do not know why
THANKSSSSSSSSs