Hey there!
I'm hoping that someone can help me out. My nephew who's a wanna-be geek was going to update my ROM (which didn't to be done really, but he wanted to show me what he was able to do). He went and downloaded the latest CM 11, rebooted and went into TWRP 2.7.0.1, did a factory reset, an advanced wipe, and did the Format Data. When he did that, it got stuck in a loop. Nothing happened. He tried to install the ROM he downloaded, and NOTHING! Long story short, by him doing the Format Data, he wiped out my partitions. TWRP, no matter what I try to do tells me it's unable to mount 'data' or 'media' etc. etc. Which is leading me to believe I have no partitions left. I've tried installing the latest update from Asus, and no dice. I've tried restoring backups that I have on my micro SD, and that's not working.
Can someone please help me and tell me how to fix this? Can I get my partitions back? I'm really hoping that I don't have to send this tablet off to Asus in Dallas, TX to have it repaired.
I'm using a loaner tablet from a rental store, hoping I can get my TF 300 fixed.
Any help is deeply and sincerely appreciated.
Omega
Sent from my SM-P600 using Tapatalk
I was about to suggest you look in the correct forum, but I see you posted there as well. Anyway, your partitions are probably okay, they have just been wiped out, that doesn't mean you lost them. Have you tried reflashing the recovery? Were you able to flash anything with said recovery before that? Wiping the partitions in the recovery shouldn't have any effect on the flashing functionality, no matter which partitions were selected (except for sdcard, since that's where the ZIPs are stored), so there might be a problem with the recovery itself. Are you sure you have the correct one for your device?
Duchman said:
I was about to suggest you look in the correct forum, but I see you posted there as well. Anyway, your partitions are probably okay, they have just been wiped out, that doesn't mean you lost them. Have you tried reflashing the recovery? Were you able to flash anything with said recovery before that? Wiping the partitions in the recovery shouldn't have any effect on the flashing functionality, no matter which partitions were selected (except for sdcard, since that's where the ZIPs are stored), so there might be a problem with the recovery itself. Are you sure you have the correct one for your device?
Click to expand...
Click to collapse
Hey there Duchman ...
Thanks for your reply. I have tried reflashing the recovery like you suggested. And after that tried to reinstall CM11.Afterwards reflashing the recovery it says “Unable to mount data." I don't know if I need to flash a more recent version of TWRP, if that would even help.
Before all of this happened I could flash almost any ROM of my choice as long as it was KitKat supported. All of my backups and restores are kept on my micro SD so they aren't accidentally deleted. As far as I know it's the correct version of TWRP. It's worked for me so far, ever since I updated to KitKat.
Sent from my SM-P600 using Tapatalk
Omega Recon said:
Hey there Duchman ...
Thanks for your reply. I have tried reflashing the recovery like you suggested. And after that tried to reinstall CM11.Afterwards reflashing the recovery it says “Unable to mount data." I don't know if I need to flash a more recent version of TWRP, if that would even help.
Before all of this happened I could flash almost any ROM of my choice as long as it was KitKat supported. All of my backups and restores are kept on my micro SD so they aren't accidentally deleted. As far as I know it's the correct version of TWRP. It's worked for me so far, ever since I updated to KitKat.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
You could try flashing a newer recovery first, I think 2.7.1.0 is available for your device. Also try doing a hard reset by cold booting - here's a how-to: https://www.youtube.com/watch?v=oTU38Ewh8qo (wipe the cache afterwards)
If that doesn't help, reverting to stock is probably your best option. Try this: http://forum.xda-developers.com/showthread.php?t=1757077 (be sure to grab the correct firmware and back up your files)
Have you tried installing any other custom ROM? Does it give you the same error when you try to restore your backup?
Here's what I've come across so far. I did the reset, and that did nothing.
Tried to flash the stock version, after a few seconds, TWRP popped up with FAILED.
I've tried flashing Omni ROM. It will flash, load up, and gets stuck at the boot screen or boot animation. This happens with just about every ROM I try to flash.
Been looking for TWRP 2.7.1.0. I'm not seeing it listed on TWRPs site. Where can I get a copy? Thanks!
Sent from my SM-P600 using Tapatalk
Here you go: http://forum.xda-developers.com/showthread.php?t=2772093
Also do try flashing another recovery, PhilZ for instance: http://forum.xda-developers.com/showthread.php?t=2597860
Did you try wiping all of the partitions again?
Related
I'm not sure what happened to my tablet. I really can't seem to figure it out. I was using it last night before I went to sleep, and I just closed it away (I have the keyboard dock), and packed it in the case this morning for work. When I took it out to use it at work it had already been stuck in a boot loop. I have wiped, and reinstalled 3 different roms on it since. It's still doing the same thing. Is there anything else I can do? What could have caused this?
I know that you've tried to flash several ROMs, but please check if you've done all the steps described below:
Copy ROM to /sdcard
Reboot in recovery
Wipe /system, /cache and dalvik-cache
Install ROM
Reboot and see if it works
If not, you might also want to delete /data, but make sure you backup it first (you can do that with a nandroid) and use /external_sd to store the ROM (just in case).
You can also try restoring your nandroid backup.
VibrantWind said:
You can also try restoring your nandroid backup.
Click to expand...
Click to collapse
I have tried both. When I flashed the original backup back onto the tablet I got the same result. I have completely wiped all data as far as I know. I even went a step further and formatted my sd card to ensure none of the ROM files were corrupt, then placed them back on the card. Is there even more data I can delete other than the system wipe/cache/dalvic cache?
wipe staging
wipe battery stats
ummmmm yeah those are the only 2 not listed and are not all that usefull to you
Do you have nvflash ? If so i would do a complete wipe ie format everything even recovery etc then flash a nvflash rom then restore my nandroid if i knew the integrity of it was good
Sent from my Transformer TF101 using xda premium
theres a Super wipe I use in mikes Android Revolution HD thread..
I have used this before to fix a few problems I was having..
Check "how to flash" section for it
http://forum.xda-developers.com/showthread.php?t=1245892
I had the same thing happen to me. Just boot loop out of the blue. It was sitting at home charging, came home to it boot looping.
I tried re-flashing the rom I was on (prime) and flashing other roms and nothing worked.
I had to use the super-wipe script to get it working.
fone_fanatic said:
I had the same thing happen to me. Just boot loop out of the blue. It was sitting at home charging, came home to it boot looping.
I tried re-flashing the rom I was on (prime) and flashing other roms and nothing worked.
I had to use the super-wipe script to get it working.
Click to expand...
Click to collapse
I have tried the Revolutionary Rom, and after it wipes and installs, and reboots it just says at the Asus eEE screen. What on earth could I have possibly done? Is the super wipe something that can be manually done, or does this only occur while installing the rom?
Holy Canoli, I think I may have forgot one step.....one second..."tinkering"...
Edit: update, I'm not going to tell anyone what I forgot to do after the super wipe (which is a godsend), but alas, my Transformer is functional again. Thanks guys!
MrAutomatic said:
Holy Canoli, I think I may have forgot one step.....one second..."tinkering"...
Edit: update, I'm not going to tell anyone what I forgot to do after the super wipe (which is a godsend), but alas, my Transformer is functional again. Thanks guys!
Click to expand...
Click to collapse
Let me guess... You flashed super-wipe, but didn't install any ROM after...
Don't worry, we're here to help, not judge!
AzureusPT said:
Let me guess... You flashed super-wipe, but didn't install any ROM after...
Click to expand...
Click to collapse
My bet is on that as well! haha
Not going to lie.. I've done that before.
Hi Folks.
Ok here is my situation, I have a rooted and unlocked TF700.
I flashed Zeus 4 and all worked well, then flashed (after full wipe) PARANOIDANDROID 2.15 and again everything was great,
Yesterday I flashed Baked Bean 4 (again after a full wipe) and apart from some SD issues all seemed ok,
I then decided to restore my TWRP backup of Zeus as I needed to use my 64gig msd card.
After a full wipe and restore Zeus started up but the dpi was messed up (160) I think (way small)
I was seeing loads of FC's and file manager showed my internal SD as being empty. Rebooted to recovery and tried the "Format Data" option
It failed right away with this message "E: Unable to format data."
I have tried flashing the stock .26 rom via TWRP and I have the same issue, dpi set to 160 and internal sd not mounted.
It seems my Internal sd is corrupt
What is the procedure to reformat it via ADB or fastboot? (I have searched but the results I found relate to other devices and I dont want to simply follow instructions that might cause further harm to my TF700)
I have followed the NVflash brick proof procedure and have all relevant files backed up (I did this before flashing the last 2 roms)
Please can some one point me in the right direction
Thanks a lot
Jules
I always wipe cache, system, internal, davic and then do a factory reset.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
When you said that you tried to flash the stock .26 you meant installing not restoring a backup, right? What rom you have on your device right now?
Pretoriano80 said:
When you said that you tried to flash the stock .26 you meant installing not restoring a backup, right. What rom you have on your device right now?
Click to expand...
Click to collapse
Yip extracted the zip from the zip file and copied it to my ext sd and flashed it via TWRP
I have an unusable Zeus4,
Im about to try a full wipe again and then flash .26 again
EDIT
After flashing .26 and selecting reboot I get the "No OS installed! Are you sure you wish to reboot?" message
Looks like the system partition is corrupted, but i'm not sure. I think you should come here on IRC and maybe someone with more experience will help you - - http://webchat.freenode.net/?channels=asus-transformer
Thanks so much Pretoriano80!
With his help on IRC I was able to solve the problem,
In the end I had to return to complete stock, It seems CM10 caused some problems,
You are a a legend dude Thanks!!
:good:
ZaJules said:
Thanks so much Pretoriano80!
With his help on IRC I was able to solve the problem,
In the end I had to return to complete stock, It seems CM10 caused some problems,
You are a a legend dude Thanks!!
:good:
Click to expand...
Click to collapse
This same thing happened to me with my Prime when I was getting ready to send it off for RMA because of a broken HDMI port. Since I was unlocked I was advised to restore to stock before sending it in. However, before I got the chance to do that I started getting the "E: Unable to format data." error that you were. I ended up erasing all partitions from fastboot and putting a note in the box that it wouldn't boot after an OTA. I managed to get away with it and wasn't charged for fixing it
For future reference it would be really helpful to know how you fixed this. Did you do something like what is in this thread: http://forum.xda-developers.com/showthread.php?t=1803343.
Did you ever figure out how CM10 messed up your Infinity? I was running CM9 on my Prime when I got this error. Thanks!
It's hard to say if it was CM10 (or any other custom rom) or TWRP to mess the things up but we managed to get back to stock by replacing the twrp with CWM recovery and installing a modified .30 update package. Was a tricky one but we didn't had to mess with the partitions and that's good.
Pretoriano80 said:
It's hard to say if it was CM10 (or any other custom rom) or TWRP to mess the things up but we managed to get back to stock by replacing the twrp with CWM recovery and installing a modified .30 update package. Was a tricky one but we didn't had to mess with the partitions and that's good.
Click to expand...
Click to collapse
Why did you switch to CWM? Do you have any thoughts on the advantages and disadvantages of TWRP vs CWM?
paddycr said:
Why did you switch to CWM? Do you have any thoughts on the advantages and disadvantages of TWRP vs CWM?
Click to expand...
Click to collapse
Switched to CWM just to make sure it wasn't twrp recovery that somehow was failing to flash the partitions correctly. Tbh so far both do their job and both share the same limitation so far, meaning both fail to restore the boot partition (kernel) so in order to restore successfully (from a nandroid backup) you need to flash the right kernel after restoring is done. Otherwise i like TWRP better and never had issues with it, but i miss the advanced option from CWM, the one that let you format each partition individually.
Pretoriano80 said:
Switched to CWM just to make sure it wasn't twrp recovery that somehow was failing to flash the partitions correctly. Tbh so far both do their job and both share the same limitation so far, meaning both fail to restore the boot partition (kernel) so in order to restore successfully (from a nandroid backup) you need to flash the right kernel after restoring is done. Otherwise i like TWRP better and never had issues with it, but i miss the advanced option from CWM, the one that let you format each partition individually.
Click to expand...
Click to collapse
I'm not certain what you're referring to here. I've restored many times from different TWRP backups (for each custom rom that successfully boots and is half-decent, I make and keep a backup in case I want to jump around and try new things) and I've never had any issues. I am still on the .26 firmware update because I plan to do the nvflash thing. Are you saying that between Zeus v4 (ICS) and various Jelly Bean roms I've been on the same kernel? I gues I just haven't checked.
Anyway, I really love the TWRP recovery and use it with Xoom and Nexus 7 as well. It's so easy to use and always has been reliable.
okantomi said:
I'm not certain what you're referring to here. I've restored many times from different TWRP backups (for each custom rom that successfully boots and is half-decent, I make and keep a backup in case I want to jump around and try new things) and I've never had any issues. I am still on the .26 firmware update because I plan to do the nvflash thing. Are you saying that between Zeus v4 (ICS) and various Jelly Bean roms I've been on the same kernel? I gues I just haven't checked.
Anyway, I really love the TWRP recovery and use it with Xoom and Nexus 7 as well. It's so easy to use and always has been reliable.
Click to expand...
Click to collapse
For me moving between various roms by just restoring a backup never worked like it should. Let's say i'm on CM10 and i want to restore from a stock rom backup, the restore process is done, after reboot the device gets stuck to the first Asus screen and will stay there. Now if i get back to recovery and flash an update. zip containing the stock kernel the device will boot just fine, so definitely the boot image doesn't get restored in my case (with . 26 bootloader ).
Edit: @okantomi: You are using the internal storage or a MicroSD for backup / restoring? I'm really curious how this could work for some and not work for others, i mean same device, same recovery, same bootloader version...
Pretoriano80 said:
For me moving between various roms by just restoring a backup never worked like it should. Let's say i'm on CM10 and i want to restore from a stock rom backup, the restore process is done, after reboot the device gets stuck to the first Asus screen and will stay there. Now if i get back to recovery and flash an update. zip containing the stock kernel the device will boot just fine, so definitely the boot image doesn't get restored in my case (with . 26 bootloader ).
Edit: @okantomi: You are using the internal storage or a MicroSD for backup / restoring? I'm really curious how this could work for some and not work for others, i mean same device, same recovery, same bootloader version...
Click to expand...
Click to collapse
Ok, I only flash a new zip from the internal storage...made myself a "Flashworthy" folder which I keep stocked with newest versions of roms/gapps. I save my TWRP backups to my external microsdcard, as well as my TiBu backups. I have never had a problem restoring from TWRP this way, honestly.
okantomi said:
Ok, I only flash a new zip from the internal storage...made myself a "Flashworthy" folder which I keep stocked with newest versions of roms/gapps. I save my TWRP backups to my external microsdcard, as well as my TiBu backups. I have never had a problem restoring from TWRP this way, honestly.
Click to expand...
Click to collapse
Well, in this case i really have no clue why restoring works for some users but not for all.Dees_Troy, the dev behind Twrp recovery told me that .26 bootloader is to blame for the recovery failing to restore the boot partition, but looks like you have that bootloader version and restoring works good for you... interesting.
Pretoriano80 said:
Well, in this case i really have no clue why restoring works for some users but not for all.Dees_Troy, the dev behind Twrp recovery told me that .26 bootloader is to blame for the recovery failing to restore the boot partition, but looks like you have that bootloader version and restoring works good for you... interesting.
Click to expand...
Click to collapse
It is a mystery. Is there any other info that might be relevant to see why the difference in results? I ask because I would like to understand this device better, as well as potentially help others.
okantomi said:
It is a mystery. Is there any other info that might be relevant to see why the difference in results? I ask because I would like to understand this device better, as well as potentially help others.
Click to expand...
Click to collapse
I don't know, maybe the twrp version and the backup options, like if you are using compression or not, which partitions do you backup (boot, system, data, recovery, cache)...
Pretoriano80 said:
I don't know, maybe the twrp version and the backup options, like if you are using compression or not, which partitions do you backup (boot, system, data, recovery, cache)...
Click to expand...
Click to collapse
I'm using TWRP 2.2.2.1, I back up boot, system and data only, and I don't use compression.
So I was using Calkulin's stock 33R with AK kernel, which has been running fine. I deciced that I should try PA, so i did my regular thing of making a nandroid backup, wiping /data, /system and /cache. Flashed PA and the relevant Gapps, and got stuck on PA bootscreen. So I tried it again, and upon closer inspection, in, the flashing of Gapps failed because it was unable to find build.prop.
So I tried it all over again just with PA, no Gapps, no anything else. Same result, just the PA boot animation staring at me for over 20 minutes.
I then tried flashing Clakulin's stock again, and no luck, still stuck on OPO logo screen. I thought perhaps my partitions were messed up, so I wiped everything and flashed stock 33R from CM. Well, at least that booted and my EFS data was intact. I then tried reverting to Calkulin's stock by sideloading, and it never went past the boot screen.
Bottomline: I cannot use any ROM apart from stock 33R. Installing a kernel on top bootloops, installing root bootloops, installling a ROM bootloops, almost anything I flash bootloops. This is driving me nuts.
I am using the latest Philz recovery and my BL is unlocked. I am also a very seasoned flasher and I know what I am I am doing. Yet, this issue is boggling the crap outta me.. I know the solution is probably simple, yet I'm overseeing it.
PLS DON'T KILL ME FOR NOT PROVIDING A LOGCAT. I'll provide anything requested by those helping.
EDIT 1: When I say flash stock 33R, I am referring to the factory image provided by CM on their site. Also, remmeber the nandroid backup I made? That failed to restore. Yea, it failed hard on me.
EDIT 2: I remmeber reading in another device forum where his recovery was mounting the wrong partition when flashing, which makes sense since Philz's recovery produces an error where gapps can't find build.prob. I checked the recovery settings and the only mount I can change is SD from /media/0 to /media/
EDIT 3: I want to shoot the phone, and then myself.
Perhaps try using TWRP, just to rule it out?
EddyOS said:
Perhaps try using TWRP, just to rule it out?
Click to expand...
Click to collapse
Tried TWRP, no error on flashing the Gapps, but still stuck on boot animation.
If you flash the stock factory image does that work? I know you say you can 'use stock' but you don't say whether that was your backup or the factory image
EddyOS said:
If you flash the stock factory image does that work? I know you say you can 'use stock' but you don't say whether that was your backup or the factory image
Click to expand...
Click to collapse
I meant the stock factory image. My nan droid failed to restore.
I'm stumped cause if the factory image works so should everything else. Bizarre!
Hope you get it fixed soon, bud!
One last thought - I assume the md5s matched on the files you tried to flash, correct?
EddyOS said:
I'm stumped cause if the factory image works so should everything else. Bizarre!
Hope you get it fixed soon, bud!
One last thought - I assume the md5s matched on the files you tried to flash, correct?
Click to expand...
Click to collapse
All md5s matched with the files. It IS really bizzare indeed. I searched about this problem for several hours, even on other devices. But no luck!
Try an older factory image and let it boot and do all the ota updates and try then that's what i did
gavin-phelan said:
Try an older factory image and let it boot and do all the ota updates and try then that's what i did
Click to expand...
Click to collapse
Tried that too. Started off from 25, moved to 30 and still no luck.
Hi, im new here and i have problem with booting up my TF700t...
I did the process uncountably many times with clockwork and twrp recovery, i wiped out completely everything and i can say i tried everything to make it work... but when tablet tries to boot, there appears asus logo, then the four penguins show up with some codes, the last one is "preinit : finished - booting your operating system" ... sometimes there appears another two codes under that, but only sometimes. Then the crombi kk animation shows up and get stuck. This is repeating without end. I tried everything on all the forums i managed to google out but the problem still resists. It looks like my last chance is to post my problem here.
Thank you and sorry for my bad english
did you reformat partitions, and did you make a mistake of formatting anything else to f2fs other than /data? which rom and which kernel?
I have been flashing crombi kk and i dont really know anything about f2fs and kernel... I wiped out everything because the OS didnt boot up so i was forced to try that.
Much thanks for the reply...
You gotta check the basics first:
Have you enabled signature verification in TWRP to make sure you don't have a bad download?
Which TWRP version are you using?
If you didn't do it yet, format - not wipe - data and reinstall the rom.
I enabled signature verification, i tried different versions of twrp, now i am using the kang's 2.8.5.1 and i also tried to format and reinstall the rom as you say. Now i mentioned that there are multiple versions of crombi kk, is it possible that i have been using the wrong one?
marcq352 said:
I enabled signature verification, i tried different versions of twrp, now i am using the kang's 2.8.5.1 and i also tried to format and reinstall the rom as you say. Now i mentioned that there are multiple versions of crombi kk, is it possible that i have been using the wrong one?
Click to expand...
Click to collapse
I have the same problem and I too enabled signature verification.. I read that wiping everything and than reinstalling from external storage will help, but it did not.
Please Help
I was in miui ROM then I tried flashing Metallium ROM, after I flashed it, it booted up but, it wasn't restoring my previous apps, so I skip that part, but then when I got to the home screen I wasn't able to access my stuffs in my phone memory.
So I thought maybe I need to change the data to f2fs, so I went to the recovery and did and flashed the Metallic ROM again, but this time it didn't boot at all, there was a bootloop and I could get past the start up screen.
I tried my older ROMs the one that I had, but it's all giving me the same response now, I have switch before but I never have had this problem. Please help, how do I flash other lollipop ROM again.
Maybe changing to f2fs and doing a factory reset. If that doesn't help, flash stock ROM via fastboot.
kennylrmsailo said:
Please Help
I was in miui ROM then I tried flashing Metallium ROM, after I flashed it, it booted up but, it wasn't restoring my previous apps, so I skip that part, but then when I got to the home screen I wasn't able to access my stuffs in my phone memory.
So I thought maybe I need to change the data to f2fs, so I went to the recovery and did and flashed the Metallic ROM again, but this time it didn't boot at all, there was a bootloop and I could get past the start up screen.
I tried my older ROMs the one that I had, but it's all giving me the same response now, I have switch before but I never have had this problem. Please help, how do I flash other lollipop ROM again.
Click to expand...
Click to collapse
Anyone out there? Need help desperately.
Anyone?
samuelcr93 said:
Maybe changing to f2fs and doing a factory reset. If that doesn't help, flash stock ROM via fastboot.
Click to expand...
Click to collapse
Yeah that might work but I'm kinda looking for a solution where I don't have to flash the stock again because I lost all my moto g stuffs some months back.
And another thing is that when I flash MIUI its working fine again and I'm able to access all the file in my phone storage also. Any suggestions?
Mmmm if you are using TWRP you could connect the phone to the PC and make a backup while you are in recover mode. Then format again data partition to f2fs and make a factory reset including internal storage and finally flash your ROM and restore your files.
But if that is not working then the only option is flashing Stock ROM
If MIUI is still booting it means that your data partition is still ext4