Help with fixing wireless performance... - Android Stick & Console Computers General

I bought one of these E888 android stick thingys however the wireless performance is almost non existent, it works, if I have my phone hotspot over it lol, but it won't connect to the router in the other room...
http://www.dx.com/p/e888-quad-core-...8gb-rom-bluetooth-eu-plug-223023#.U6bEa_ldUms
http://minipute.com/2013/07/23/e888-usb-stick-mini-pc-runs-android-4-2-2-with-quad-core-cpu/2482
I've installed Finless custom Rom, moved the antenna and even clipped off the ground wire to prevent it shorting... however none of this seems to be working... does anyone have any other things I can try? Seems such a waste of what would otherwise be quite a good dongle
PS I've already gotten my money back on it so I'm open for experimentation

death_entry said:
Seems such a waste of what would otherwise be quite a good dongle
Click to expand...
Click to collapse
Definitely seems like something wrong with the antenna wiring. Shouldn't there be two wires?
https://www.youtube.com/watch?v=G3j6rOp0lvY
google for "RK3188 wifi solder"
Alternatively you can get a wired USB->LAN 10/100 adapter for $6
http://goo.gl/OYHGVR

britoso said:
Definitely seems like something wrong with the antenna wiring. Shouldn't there be two wires?
https://www.youtube.com/watch?v=G3j6rOp0lvY
google for "RK3188 wifi solder"
Alternatively you can get a wired USB->LAN 10/100 adapter for $6
http://goo.gl/OYHGVR
Click to expand...
Click to collapse
Ha not sure, I don't think all versions have two wires im sure ive seen some shots where there is only one? :S
Maybe the lan thingy could work, didn't think of that, would make those powerline adapters useful for something finally lol...

Related

HTC Desire microUSB Cable fragile...

In one week I have succeed to break my microUSB cable that came with the Desire, the USB-Brick is probably due to manipulation with those type of weak cables for sure it can't help. I'll get a new one (or two). I guess my pile of 20 miniUSB is useless now...
The Odd is that it can charge upside down
yeah very rare, ive never managed to break my cable and my cable has been through a lot including using it as a belt along with holding a pair of ladders down on the top of my car
A|ex said:
yeah very rare, ive never managed to break my cable and my cable has been through a lot including using it as a belt along with holding a pair of ladders down on the top of my car
Click to expand...
Click to collapse
Are you serious?
This isn't exactly Sonim.
Still, how exactly is the OP's cable damaged?
P.S. I'm also pissed that my collection over way over 100 miniUSB cables seem to be all too slowly becoming redundant. Before my HTC Desire, everything was Mini, not I'm forced to carry both types around. I'm considering making some neat little converters for my other devices.
Can confirm.
The cable that came with my Desire (more wire than cable) is crap.
It broke within the first week.
Nearly no strain at all, cable break at the USB plug.
you can use a mini to micro USB convertor instead of carrying both wires around
http://cgi.ebay.co.uk/NEW-MINI-MICR...t=UK_Computing_USB_Cables&hash=item35aa014cdd
alias_neo said:
Are you serious?
This isn't exactly Sonim.
Still, how exactly is the OP's cable damaged?
P.S. I'm also pissed that my collection over way over 100 miniUSB cables seem to be all too slowly becoming redundant. Before my HTC Desire, everything was Mini, not I'm forced to carry both types around. I'm considering making some neat little converters for my other devices.
Click to expand...
Click to collapse
Yes i am serious, i have been using the original HTC cable that came with the phone and an additional two official HTC cable for desire just fine. I dont have any problems with them and yes i have used them as belts and cable ties.
The only way i can see you ever damaging one of these is if you damage the end or the cable you have might have been faulty from the start or near broke.
I just tried to bend the end of mine a few times and it still seems to be working, i did a few file transfer tests and it doesnt work any slower or faster.
out of all the desires or htc phones sold with a usb mini cable your the only person to report this?
The same thing happened to shadow and my cable broke during the first month as well.
blauze said:
The Odd is that it can charge upside down
Click to expand...
Click to collapse
mine does too
lol
you can fix a usb brick easily and ppl if ur plugging the phone in to the front of ur computer try a different port preferably at the back
I already broke several cables. Now one on of the pins of the Desire's micro-usb connector broke.. I for sure am a bit hard on my equipment but this never happened with micro-usb. I also think it easily breaks because the cable does not fully connect with the Desire's micro-usb connector. It sticks halfway in.
Anyway, I can no longer connect via usb and with all the dents and scratches it will probably be very hard to get repaired under warranty.
Mine works fine, but my mother's stopped working without visible damage.
Mine failed too, Its fussy about charging and very rarely works for USB. I think its the microusb<->cable connection that fails because its not moulded like most cables.
I've got a cable from a blackberry now (it was lying around, ive never had a BB) which works fine for charging and USB, the moulded connector seems better and the cable is much thicker.
I'd rather the cable or connector broke than the port on the phone (which is what microusb is designed for)
I was wondering if they can be fixed?!
YOU"RE RIGHT, they're flimsy.
These
Code:
[URL="http://www.amazon.com/gp/product/B004W3LKZ0/ref=cm_cr_rev_prod_title"]cables[/URL]
Look sturdy but break too easily. Not as cheap as most chinese made but these cables usually break in about 2 months for me. Dont even think about folding it and putting it in a bag for those frail,dying HTC phones.
I wonder if the cables are easy to fix... its copper right?
-Can anyone recommend a simple way to handle these wires or a more durable wire? I dont want to buy one every month. I'm thinking about http://www.amazon.com/Micro-Retract..._19?s=wireless&ie=UTF8&qid=1328931599&sr=1-19.
---------- Post added at 01:09 AM ---------- Previous post was at 01:05 AM ----------
nokli said:
you can use a mini to micro USB convertor instead of carrying both wires around
http://cgi.ebay.co.uk/NEW-MINI-MICR...t=UK_Computing_USB_Cables&hash=item35aa014cdd
Click to expand...
Click to collapse
I am thinking about it. It costs about the same to just buy the micro cable. This has 30 days. http://www.ebay.com/itm/Mini-5-Pin-...262914?pt=PDA_Accessories&hash=item3f13828e82
my usb cable rubber is also starting to split at the ends. but it still works fine.
Never broke it but...
I never actually broke the cable, but I always found it very loose. When I insert the microUSB into my phone it doesn't click or anything. It just sorta lays there. It is not very stable and I am always terrified when messing around with something that requires a stable connection (alpharev, root, etc.)
Am I the only one experiencing this, or did I just get a lame cable?
USB conector
I've never had trouble with my htc cable, but I've replaced the usb port twice on one phone and once on the other. (yes I have two desire's)
I too wish it was a deeper port.

[Q] Help me with Video out cable?

Ok so I have a minor problem. I want to make a video out cable for the MT4GS. I have the right tools, and know-how. Anyways whenever I just use a 4 3.5mm male jack (has 4 metal contacts instead of 3, don't know what to call it), and use a rca cable and get it hooked up I can use it and it works fine sometimes. It seems that, when I get it working if I open the T-mobile TV app it shorts it out and stops the video out. And sometimes when I just plug it in to the rca port on the TV it acts like its shorting out. I don't have any shorts in the wire and no wires are touching to create a short. The only thing I can think of is maybe the voltage is going backwards into the headphone jack on the phone. Would adding a diode help with this? Anyone have any ideas or helpful information? Also to add I can get the audio out working from the phone to TV working fine, I just seem to have problems with getting video to work properly. I know I could always go and buy a cable, but I want to make one, because its cheaper.
marc12868 said:
Ok so I have a minor problem. I want to make a video out cable for the MT4GS. I have the right tools, and know-how. Anyways whenever I just use a 4 3.5mm male jack (has 4 metal contacts instead of 3, don't know what to call it), and use a rca cable and get it hooked up I can use it and it works fine sometimes. It seems that, when I get it working if I open the T-mobile TV app it shorts it out and stops the video out. And sometimes when I just plug it in to the rca port on the TV it acts like its shorting out. I don't have any shorts in the wire and no wires are touching to create a short. The only thing I can think of is maybe the voltage is going backwards into the headphone jack on the phone. Would adding a diode help with this? Anyone have any ideas or helpful information? Also to add I can get the audio out working from the phone to TV working fine, I just seem to have problems with getting video to work properly. I know I could always go and buy a cable, but I want to make one, because its cheaper.
Click to expand...
Click to collapse
Just remember, your time is worth money too! My cable was less than $3 including shipping, that is less than a half hour of my time, at minimum wage no less!
yellowjacket1981 said:
Just remember, your time is worth money too! My cable was less than $3 including shipping, that is less than a half hour of my time, at minimum wage no less!
Click to expand...
Click to collapse
Ehh, well I don't want to wait for shipping, and in stores here they're like $10+. Anyways it's not like soldering is a burden to me. I just don't understand why it's not working. I mean the 4th contact would be used for both mic input and video output so the only thing that I can think of is voltage is traveling back into it instead of traveling out. But TV cables don't have any diodes or anything like that so I don't understand. And anyways it's not like I have anything better to do when I'm not working.

[Q] Galaxy Gio internal antena conector?

Can anyone tell me what kind of connector is this? I can upload a better picture if needed.
Thanks
I also have this phone, and i had actually noticed that port before.
I think it is indeed an antenna connector.
the reason is, when i dissasembled my old laptop completly, i found a similar port that connected the wireless card to the antenna that ran aroud the screen.
As for what it does, i have no idea.
But im not an expert, this is just an opinion
S0m30n309 said:
I also have this phone, and i had actually noticed that port before.
I think it is indeed an antenna connector.
the reason is, when i dissasembled my old laptop completly, i found a similar port that connected the wireless card to the antenna that ran aroud the screen.
As for what it does, i have no idea.
But im not an expert, this is just an opinion
Click to expand...
Click to collapse
I figured that much, what I would like to know is the type / name of it, so I could find an antena for it. Why? Because I can and for the fun of it, just to see what happens .
It could bee for the wifi radio, or the gps radio or all of them, can't be sure without actualy testing it
This as an externel antena for 3g/2g

ebay smartdock clone

On my quest to make an adapter to use my Atrix Lapdock with my S4 I already destroyed an mhl adapter, and now I want to try this dock from ebay.
Has anyone had any experience with it?
Let me know, looks nice.
Sent from my GT-I9505 using xda app-developers app
Be careful. I bought one of these on Amazon a while back...
http://www.amazon.com/gp/product/B00C4CVT7A/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1
...and I realize it might not be the same exact thing, but it looks similar in construction.
About 2 weeks after I started using it, it started shorting out and sparking! I was lucky that I was right beside it when it started happening and got my phone out of it before any damage was done. The problem was with the wiring / circuitry in the base of the unit. I threw it away immediately.
So, hopefully your will work a lot better, just be careful.
scott14719 said:
Be careful. I bought one of these on Amazon a while back...
http://www.amazon.com/gp/product/B00C4CVT7A/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1
...and I realize it might not be the same exact thing, but it looks similar in construction.
About 2 weeks after I started using it, it started shorting out and sparking! I was lucky that I was right beside it when it started happening and got my phone out of it before any damage was done. The problem was with the wiring / circuitry in the base of the unit. I threw it away immediately.
So, hopefully your will work a lot better, just be careful.
Click to expand...
Click to collapse
Thanks for the info. I usually buy stuff from DX, so I'm quite used to opening and doing a good quality check for every item I buy before using it!
I got the item, it works good and the build quality is good.
BUT, when you connect an external power supply, the power to the usb host port gets disconnected and the usb lines get shorted. So you can use either the USB OR the HDMI. There are 3 relays inside the device; by disabling the top one you can do the 500ms short trick and get the HDMI + USB HOST + CHARGING features, but it takes some effort.
gip_mad said:
I got the item, it works good and the build quality is good.
BUT, when you connect an external power supply, the power to the usb host port gets disconnected and the usb lines get shorted. So you can use either the USB OR the HDMI. There are 3 relays inside the device; by disabling the top one you can do the 500ms short trick and get the HDMI + USB HOST + CHARGING features, but it takes some effort.
Click to expand...
Click to collapse
Are you able to use or make a charge only cable (only 5V and ground)? That way the USB data lines should not be affected if the charger shorts the data pins.
Or is the one of the relays shorting the data pins inside the adapter?
Sorry, maybe I didn't explain correctly. The adapter shorts the phone's usb data pins, everything else is untouched. A delay circuit is implemented too, so it looks like they tried to do the 500ms trick but failed miserably so they sold the dock as is.
has anyone got any further with this project? I have an original Samsung smart dock and have now got the hdmi converters but nothing is shown on the lapdock screen. The adaptors and lapdock work fine as I have had it connected to my sky hd box?
Hi, did you try the adapters with a TV? My adapters work well and send a (distorted) image to the lapdock..
Yes I tried them both ways as an output to a tv and also an input to a moniter
looks pretty interesting. huh

Will Nintendo Switch dock Work with S8?

Hey,
I was thinking... there is any chance that the Switch dock works with the S8 like the DeX official accessory?
NO.
Not even the same thing. Just simply no, it will not work.
xile6 said:
NO.
Not even the same thing. Just simply no, it will not work.
Click to expand...
Click to collapse
Thats like saying "I wonder if the S8 will connect bluetooth to my vacuum cleaner" lol
takato23 said:
Hey,
I was thinking... there is any chance that the Switch dock works with the S8 like the DeX official accessory?
Click to expand...
Click to collapse
lol hell no are you really being serious asking this question
Aside from all the snide comments, there is a possibility. The Switch connection to the dock is USB-C which carries power and HDMI. If the Switch is using standard USB-C spec functions for this, then there is a possibility. The weak point is likely Samsung not supporting USB-C for video and not using USB Power Delivery standard. So, I'd say there is a slight possibility, but not likely.
Very possible. 10 years ago I was able to connect a purple dildo with arcane lightning bolt accents via bluetooth or NFC to a Nokia 3310 then there is a chance.
faded03cobra said:
Very possible. 10 years ago I was able to connect a purple dildo with arcane lightning bolt accents via bluetooth or NFC to a Nokia 3310 then there is a chance.
Click to expand...
Click to collapse
So is that an unhelpful sarcastic response or an example of current dildo intercommunication standards? So hard to tell these days...
faded03cobra said:
Very possible. 10 years ago I was able to connect a purple dildo with arcane lightning bolt accents via bluetooth or NFC to a Nokia 3310 then there is a chance.
Click to expand...
Click to collapse
That is majorly old school man lol I remember my nokia 6600 "GAIT" phone that could switch between gsm and tdma on Cingular and that was groundbreaking tech at that time. I got 480 talk minutes for $60 and no data. Remember what a big deal the RAZR was? People claimed it was bulletproof
johnwayne27 said:
Thats like saying "I wonder if the S8 will connect bluetooth to my vacuum cleaner" lol
Click to expand...
Click to collapse
So, a legitimate question then.
Control your Roomba with your phone via Bluetooth.
Hahaha, I don't know why is so absurd my question. It is an usb-c port with one usb and hdmi out. It could perfectly work
no one tried this?
nobody plays the switch
Hello,
I did try this using a small USB C extension and it did not seem to work.
KMyers said:
Hello,
I did try this using a small USB C extension and it did not seem to work.
Click to expand...
Click to collapse
Why using an extension? You couldnt put it on the dock directly?
I tried it, and was not able to get the phone in there.. gave up after 2 tiny scratches on my connector.
takato23 said:
Why using an extension? You couldnt put it on the dock directly?
Click to expand...
Click to collapse
The switch dock has 2 plastic guide pins to line up the switch to the USB port. The extension cable bypasses these pins allowing anything to be plugged in. The extension was short enough to do the trick while also not long enough to degrade the connection ( https://www.amazon.com/RIITOP-USB-C...cz-20&linkId=962289736eacd9427405820e024a2a39 )
I am tempted to try pairing the S8 with my Switch Dock - there was no damage to your phone after trying with the extension cable?
https://www.reddit.com/r/NintendoSw...m_nintendo_switch_docks_switch_con_sfans_are/
Update: Confirmed that the Nintendo Switch will not work
Ok. Confirmed that the Nintendo Switch dock will not work. First I tested the extension cable - Switch works fine with the extension cable and the dock. Extension cable outputs full 1080p and charges the Switch.
Next I tried connecting the S8 to the extension cable - I see the display flicker - but no reaction from the S8 - except that the phone starts charging. Cannot even start screen mirroring - it does not appear to recognize the switch as a display output at all.
No ill effects to either dock or phone. Did not leave devices connected for too long.
I wonder how the CF001 is able to mimic both docks? If the Nintendo dock worked, I would have willingly paid the $100 for the official one...
Yeah I am curious because I am researching some dex options and I see Ebay has a generic Dex station that doubles as a switch dock... since I have a switch and a Note 8, it would be awesome to be able to utilize the same dock as needed.
https://www.ebay.com/itm/HDMI-Dex-S...235194?hash=item362671effa:g:atwAAOSwovNaF42M
Anyone know if this would even work? It's only $28.
It specifically says "HDMI Dex Station Desktop"
Edit:
I just bought this from Amazon for $29 with Free same day shipping:
https://www.amazon.com/Portable-Nin...id=1515685969&sr=1-6&keywords=switch+dex+dock
Reviews says it works great for Dex and the Nintendo switch, so I can use it for double duty. It's coming today, so I'll throw up a small review here.
then why does ebay sell a dex dock same as switch... even pix of switch and note 8 in same unit?
HDMI-Dex-Station-Desktop-Extension-Charging-Dock-For-Samsung-Galaxy-Note-8-S8/152748261755?epid=19007441379&hash=item239081817b:g:vxIAAOSwevdZ5xNa
Maybe
So I thought the same thing because they use the same ports and there are third party focks that support both switch and the s8 so all tge people saying its a stupid idea are wrong BUT the switch dock is designed so a switch can get in easily and getting an s8 there is nearly impossible if you dont cut the front i have both s8 and switch and i tryed but i got no luck getting it in so yea...

Categories

Resources