Related
All credit for the binary goes to Sebastian Krahmer at http://c-skills.blogspot.com/. Please see fit to donate via Paypal to [email protected]
If you want a simpler 'one-click' process, go to this thread: Easier 1-2-3 Droid 2 Root for Windows / Linux / Mac
***NOTE: Proceed at your own risk. I and the providers of this code are not responsible for anything you do to your phone!***
Setup:
- Install adb (here) and Motorola drivers for windows(32-bit or 64-bit)
- Download attached archive
- Extract to a directory, I used c:\Droid2Root
- Make sure you have USB degugging enabled
- Change connection to PC Mode
Process:
- Open command prompt
- cd c:/wherever-your-sdk-tools-folder-is
- adb devices (to verify the connection)
- cd c:/Droid2Root
- adb push Superuser.apk /sdcard/Superuser.apk
- adb push su /sdcard/su
- adb push busybox /sdcard/busybox
- adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
- adb shell
- cd data/local/tmp
- chmod 0755 rageagainstthecage-arm5.bin
- ./rageagainstthecage-arm5.bin
- let the process run until it 'kicks' you out (may take a minute or two) to c:/Droid2Root
- cd c:/wherever-your-sdk-tools-folder-is
- adb kill-server
- adb devices (to verify the connection)
- adb shell (you should now have a # prompt, if not return to ./rage step above)
- mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
- cp /sdcard/Superuser.apk /system/app/Superuser.apk
- cp /sdcard/su /system/bin/su
- cp /sdcard/busybox /system/bin/busybox
- chmod 4755 /system/bin/su
- chmod 4755 /system/bin/busybox
- mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
- exit
- exit
I'm sure there are certain steps that could be streamlined or eliminated, so please feel free to make a suggestion and I'll edit the post.
Additional thanks to @rainabba and AllDroid.org for their excellent Droid X rooting tutorial, which assisted me greatly in this process.
waiting for a recovery, glad to see its rooted
Android n00b here, I can remove the Verizon crapware with this right? And tether?
thelolotov said:
Android n00b here, I can remove the Verizon crapware with this right? And tether?
Click to expand...
Click to collapse
yes and yes
thelolotov said:
Android n00b here, I can remove the Verizon crapware with this right? And tether?
Click to expand...
Click to collapse
I wouldn't remove anything yet since we don't have a sbf file to recover from partial bricks. However, tethering and any other apps that require root can be used now.
I'm new to doing this all the adb way.
When you say extract to a directory what do you mean to extract. After it downloads the achive files its done.....
i understand the rest of the commands but im lost there
Hmm, alright, that's still worth it, will I lose my data/have to hard reset to root?
Right click the downloaded archive and "extract files". You need to do this so adb can push them to the phone.
thelolotov said:
Hmm, alright, that's still worth it, will I lose my data/have to hard reset to root?
Click to expand...
Click to collapse
Nope, it just gives you access. Nothing deleted.
I'm retarded i didnt realize it was attached to the post, i thought it was what adb downloaded when i first opened it cause it called them archives.
cannot access
I got as far as pushing super user su and busy box onto my phone but it says that system in read only.. how do i fix this?
Anybody actually try this?
Hello,
I am following your directions and when I get to the "adb push Superuser.apk" step I receive the following error:
"failed to copy 'Superuser.apk' to '/system/app/Superuser.apk': Read-only file system"
I get this same error for the other adb push steps that follow.
Edit: To verify, I get a # shell.
Edit 2: I tried pushing the Superuser.apk to /data/local/tmp then cp to /system/app/, this also popped up a read-only file system error.
I'm currently trying it.
I have a 64 bit driver on my computer that i used to use for my D1 but it doesn't recognize my D2 when doing adb devices and i cant install the 32 bit driver
GSletta said:
I got as far as pushing super user su and busy box onto my phone but it says that system in read only.. how do i fix this?
Click to expand...
Click to collapse
Did you verify you have the # prompt three steps before that?
Yeah i get the # but it wont let me push superuser su and busybox
GSletta said:
Yeah i get the # but it wont let me push superuser su and busybox
Click to expand...
Click to collapse
Weird.. I didn't need to mount the system manually, but let me if there's a step I left out.
and some more screens (feel free to use in first post):
http://i.imgur.com/nPllt.jpg
http://i.imgur.com/COTEA.jpg
http://i.imgur.com/open3.jpg
djh816 said:
and some more screens (feel free to use in first post):
http://i.imgur.com/nPllt.jpg
http://i.imgur.com/COTEA.jpg
http://i.imgur.com/open3.jpg
Click to expand...
Click to collapse
Did you add any steps to mount the system? I don't believe I did, but it seems others are finding it to be read-only.
jerseyh22accord said:
I'm currently trying it.
I have a 64 bit driver on my computer that i used to use for my D1 but it doesn't recognize my D2 when doing adb devices and i cant install the 32 bit driver
Click to expand...
Click to collapse
Don't know if it will help you, but if it's anything like the DInc, you could just use the SDK's drivers and add a few device identifier lines to the INF file before installing them.
Update: One click root has been using this "simple" method since version 2.2.7. If you're rooting your phone for the first time, please try that first. Consider this thread to be purely informational for those who want step-by-step details of how the process works.
I've been suspicious of the joeykrim root method since it was first posted at SDX. I finally got my Epic yesterday and confirmed that is, indeed unnecessary. I don't fault joeykrim though, he ported the working root method from the Moment to the Epic without actually having access to an Epic himself.
Anyways, the joeykrim root method is unnecessarilly complex becuase it works around an RFS permissions bug which loses the setuid bit on the Moment. It appears the Galaxy S phones have this bug fixed, which is why the root methods on the I9000, Vibrant, Captivate, Fascinate, etc., are much simpler.
So, for the simple root:
First, make sure joeykrim root is not installed.
Upgrade to DI18 (not strictly necessary, but you'll want to do it).
Setup a working adb from the Android SDK and whatever drivers are necessary for your platform.
Download rageagainstthecage-arm5.bin from the C skills blog (link removed due to my newbieness) or from any of the one-click root packages.
Download su-2.3.6.1-ef-signed.zip and extract "system/bin/su" and "system/app/Superuser.apk" to a temporary directory you'll be working from.
Enable USB debugging on your phone and connect it to your computer.
Now, open a command prompt/shell on your computer and cd to the appropriate temporary directory. Run:
Code:
adb push rageagainstthecage-arm5.bin /data/local/tmp
adb shell chmod 755 /data/local/tmp/rageagainstthecage-arm5.bin
adb shell /data/local/tmp/rageagainstthecage-arm5.bin
and confirm you have a working root shell. Then continue with:
Code:
adb push su /system/xbin
adb shell chmod 4755 /system/xbin/su
adb install Superuser.apk
That's it! You should have a working root via su & the Superuser package. At least, I did.
Note that the preceeding steps installs Superuser.apk to /data, which is what I prefer to do. This means if you do a "Factory data reset" su will be temporarilly broken until you reinstall the Superuser.apk package. Since installing the package itself doesn't require root, this is easily done after a /data reset.
Also note that I did not perform a /system remount-rw anywhere. At least on my Epic, /system appears to always be mounted read-write so it's an unnecessary step. It's actually the "joeykrim-root.sh" script that remounts /system read-only during the boot process, which is why folks who don't use root kernels have run into this problem before. I'm not sure why joeykrim's script does that, I guess he probably assumed /system is mounted read-only by default. There's arguments that /system should be read-only, but I didn't touch it in case some Samsung stuff depends on it being read-write.
Finally, if you're already rooted via joeykrim or are running a root kernel, there's nothing really to be gained by doing this. I'm just throwing this out there as I perfer to make the minimum invasive changes possible to obtain root.
Wow, that was really informative. To check for Super user you:
Type: adb shell
then type: SU
You should get a # sign if you have root. Correct?
In the original Noobln post method would the Epic keep root even after a wipe therefore not needing to re-apply the superuser apk again? That might be a reason why folks would want to go the more invasive route (considering rooters seems to change ROMS fairly often which requires wipes sometimes). Either way, keeping a copy of the apk file on your SD card is no big deal.
mkasick said:
Also note that I did not perform a /system remount-rw anywhere. At least on my Epic, /system appears to always be mounted read-write so it's an unnecessary step. It's actually the "joeykrim-root.sh" script that remounts /system read-only during the boot process, which is why folks who don't use root kernels have run into this problem before. I'm not sure why joeykrim's script does that, I guess he probably assumed /system is mounted read-only by default. There's arguments that /system should be read-only, but I didn't touch it in case some Samsung stuff depends on it being read-write.
Click to expand...
Click to collapse
This explains a lot of problems! thanks
EDIT- another noob question- why do you prefer to have superuser installed to /system/data- why not put it in /system/app? Also if I want to install busybox where is the best location to put it?
ZenInsight said:
Wow, that was really informative. To check for Super user you:
Type: adb shell
then type: SU
You should get a # sign if you have root. Correct?
Click to expand...
Click to collapse
Once you run rageagainstthecage-arm5.bin, you should get a root-shell automatically every time you run "adb shell" after until you reboot the phone. Yes, you can tell it's a root shell since it uses the "#" prompt. This is the important part to check, since if the exploit doesn't work, you'll have to run it again. But I haven't seen it not work.
After su is installed and you reboot, your steps are correct: run "adb shell", run "su", then you'll be prompted on the phone scren to authorize access and once you allow it you'll end up with a "#" prompt.
ZenInsight said:
In the original Noobln post method would the Epic keep root even after a wipe therefore not needing to re-apply the superuser apk again?
Click to expand...
Click to collapse
noobnl installs Superuser.apk to /system, you can do that here too. Just replace the "adb install Superuser.apk" step with "adb push Superuser.apk /system/app". It's independent of the joeykrim scripts.
With my captivate we have many update.zip root methods to choose from. Any chance this will be coming to the epic? Have a friend with an epic and command lines would be too much and one click didn't work.
Sent from my SAMSUNG-SGH-I897 using XDA App
jimmyz said:
why do you prefer to have superuser installed to /system/data- why not put it in /system/app?
Click to expand...
Click to collapse
I prefer to keep consistent with the idea that user-installed applications go in /data, and stock-installed-and-unmodified applications remain in /system/app. This way, upgrading Superuser.apk doesn't require a root-shell/root-explorer, you can remove it or upgrade it the way you do with any user installed application--adb install, side-loading via an sdcard, or downloading it from the market.
Plus, in general I prefer to keep my /system as untouched as possible. For example, I don't remove stock apps either. The "su" binary has to be installed in /system to persist after a /data wipe, and busybox is best installed to /system so it's in PATH (haven't looked into modifying the default PATH yet). Otherwise I try to keep /system alone.
jimmyz said:
Also if I want to install busybox where is the best location to put it?
Click to expand...
Click to collapse
Android's default PATH provides four places for busybox to be installed: /sbin, /system/bin, /system/sbin, and /system/xbin. /sbin is part of the initramfs, in other words it's controlled by the kernel you're running. You can install busybox to any of the three /system/*bin directories, but I prefer /system/xbin.
In the traditional Unix conventions, "/usr/bin" is for user-runnable stock-installed programs, and "/usr/sbin" is for root-requiring (superuser-runnable) stock-installed programs. "xbin" isn't part of the standard convention, but I'd guess it's intended for "extra binaries" that are not part of the stock installation (much like /usr/local/bin), thus it seems like an appropriate location for a user-added "su" and "busybox" programs.
The second reason is that "xbin" is relatively empty, so if you want to create the applet symlinks (i.e., so that you can call "cp" instead of "buybox cp") it won't overwrite the stock toolbox symlinks. Also, since "xbin" is last on the default PATH, any programs provided by both toolbox and busybox will default to the toolbox version--which would be important for stock system scripts that might run into compatibility issues if they were to use the busybox versions instead.
To install busybox, grab a copy of the binary from somewhere (one click packages, a copy of stericson.busybox.apk, etc.). Then, once rooted run:
Code:
adb push busybox /data/local/tmp
adb shell
su # Authorize on phone screen
cat /data/local/tmp/busybox > /system/xbin/busybox
chown root.shell /system/xbin/busybox
chmod 755 /system/xbin/busybox
rm /data/local/tmp/busybox
/system/xbin/busybox --install -s /system/xbin
jhnstn00 said:
With my captivate we have many update.zip root methods to choose from. Any chance this will be coming to the epic?
Click to expand...
Click to collapse
I don't believe so. The I9000/Vibrant/Captivate have recoveries that don't check the signature of update.zip (as I understand, or maybe they do but only require test keys) which makes rooting-via-recovery possible. Unfortuntaely the Epic and Fascinate do perform signature checks, so we can't enable root via stock-recovery.
That said, the Fascinate one-click methods should also work on the Epic. Although depending on why your friend couldn't get the Epic one-click to work, the Fascinate one may not work either.
mkasick said:
I prefer to keep consistent with the idea that user-installed applications go in /data, and stock-installed-and-unmodified applications remain in /system/app. This way, upgrading Superuser.apk doesn't require a root-shell/root-explorer, you can remove it or upgrade it the way you do with any user installed application--adb install, side-loading via an sdcard, or downloading it from the market.
Plus, in general I prefer to keep my /system as untouched as possible. For example, I don't remove stock apps either. The "su" binary has to be installed in /system to persist after a /data wipe, and busybox is best installed to /system so it's in PATH (haven't looked into modifying the default PATH yet). Otherwise I try to keep /system alone.
Android's default PATH provides four places for busybox to be installed: /sbin, /system/bin, /system/sbin, and /system/xbin. /sbin is part of the initramfs, in other words it's controlled by the kernel you're running. You can install busybox to any of the three /system/*bin directories, but I prefer /system/xbin.
In the traditional Unix conventions, "/usr/bin" is for user-runnable stock-installed programs, and "/usr/sbin" is for root-requiring (superuser-runnable) stock-installed programs. "xbin" isn't part of the standard convention, but I'd guess it's intended for "extra binaries" that are not part of the stock installation (much like /usr/local/bin), thus it seems like an appropriate location for a user-added "su" and "busybox" programs.
The second reason is that "xbin" is relatively empty, so if you want to create the applet symlinks (i.e., so that you can call "cp" instead of "buybox cp") it won't overwrite the stock toolbox symlinks. Also, since "xbin" is last on the default PATH, any programs provided by both toolbox and busybox will default to the toolbox version--which would be important for stock system scripts that might run into compatibility issues if they were to use the busybox versions instead.
To install busybox, grab a copy of the binary from somewhere (one click packages, a copy of stericson.busybox.apk, etc.). Then, once rooted run:
Code:
adb push busybox /data/local/tmp
adb shell
su # Authorize on phone screen
cat /data/local/tmp/busybox > /system/xbin/busybox
chown root.shell /system/xbin/busybox
chmod 755 /system/xbin/busybox
rm /data/local/tmp/busybox
/system/xbin/busybox --install -s /system/xbin
Click to expand...
Click to collapse
You sir are a true gentleman! Thank you for the informative answers- its great to have you over here! I have one more question- why can't I usually push directly to /system ?
jimmyz said:
why can't I usually push directly to /system ?
Click to expand...
Click to collapse
Pushing directly to /system requires running the adb service on the phone as the root user, so that it has permissions to write to that directory. Usually adb runs on the phone unprivileged, so you can only push to world-writable directories.
Running rageagainstthecage-arm5.bin actually changes this. The exploit forces the adb service to run as the root user, which is why "adb shell" gives you a root shell and "adb push" to /system does work, until the phone is restarted.
Interesting enough, the adb service also runs as root by default in the Android emulator. So there's probably a configuration setting, somewhere, to make it do that. In general it's safer to run adb unprivileged though, and "su" to move files to /system once uploaded elsewhere on the phoe.
mkasick said:
Pushing directly to /system requires running the adb service on the phone as the root user, so that it has permissions to write to that directory. Usually adb runs on the phone unprivileged, so you can only push to world-writable directories.
Running rageagainstthecage-arm5.bin actually changes this. The exploit forces the adb service to run as the root user, which is why "adb shell" gives you a root shell and "adb push" to /system does work, until the phone is restarted.
Interesting enough, the adb service also runs as root by default in the Android emulator. So there's probably a configuration setting, somewhere, to make it do that. In general it's safer to run adb unprivileged though, and "su" to move files to /system once uploaded elsewhere on the phoe.
Click to expand...
Click to collapse
I am learning a lot!!! Could you take a look at koush's kernel here, with it I noticed that when using adb I got the # prompt right away and was able to push to /system- maybe he was able to figure out the config settings? Once again thanks!!!
one more ? (feel free to ignore this one) what actually happens when you do
Code:
adb shell /data/local/tmp/rageagainstthecage-arm5.bin
and how does that give you permanent root?
mkasick said:
Pushing directly to /system requires running the adb service on the phone as the root user, so that it has permissions to write to that directory. Usually adb runs on the phone unprivileged, so you can only push to world-writable directories.
Running rageagainstthecage-arm5.bin actually changes this. The exploit forces the adb service to run as the root user, which is why "adb shell" gives you a root shell and "adb push" to /system does work, until the phone is restarted.
Interesting enough, the adb service also runs as root by default in the Android emulator. So there's probably a configuration setting, somewhere, to make it do that. In general it's safer to run adb unprivileged though, and "su" to move files to /system once uploaded elsewhere on the phoe.
Click to expand...
Click to collapse
It is indeed a config option in default.prop. However, this is in the initramfs and you can't change it on the fly, so you need to rebuild the kernel to change it. With some work you can modify the stock kernel to do it, but I personally haven't tried it.
Sent from my Epic 4G using XDA App
Thank you, this worked perfectly for me, running stock DI18 ROM that I flashed tonight!!! I confirmed by installing the wireless tethering pre-9 apk, and successfully ran the wireless tethering without any errors.
Quick question: do we need to do this after root or is it not needed?
NEEDED?? ===> SuperUser App to help with Security Concerns for the Epic - h**p://forum.sdx-developers.com/epic-development/superuser-app-to-help-with-security-concerns/
Also, Titanium Backup failed to work - it gave an error of denied root access, and said busybox was not installed. What needs to be done to make it work? Do I need to install clockwork mod (not exactly sure what it does though) or a custom ROM?
AndroidSPCS said:
Quick question: do we need to do this after root or is it not needed?
Click to expand...
Click to collapse
Not sure exactly what you're asking. This is an alternative to the joeykrim-based one-click roots and rooted kernels. If you already have one of those this isn't really necessary.
AndroidSPCS said:
NEEDED?? ===> SuperUser App
Click to expand...
Click to collapse
Yes, the su binary used here requires the Supruser appto be installed to authorize su requests. Otherwise they'll always be denied. Other su binaries might not require it, but then all apps have root access which isn't really a good thing.
AndroidSPCS said:
Also, Titanium Backup failed to work - it gave an error of denied root access, and said busybox was not installed. What needs to be done to make it work?
Click to expand...
Click to collapse
Did you authorize Titanium Backup when the Superuser prompt came up (requies the Superuser app to be instald too)?
Titanium Backup has an option to download and install it's preferred version of busybox. Follow the prompts to do that.
mkasick said:
Not sure exactly what you're asking. This is an alternative to the joeykrim-based one-click roots and rooted kernels. If you already have one of those this isn't really necessary.
Click to expand...
Click to collapse
Thanks, actually this was referring to the thread where the instructions for going to adb shell or terminal and typing in the following commands:
adb shell
su
mount -t rfs -o remount,rw /dev/block/stl9 /system
cp /system/bin/su /system/bin/jk-su
exit
Yes, the su binary used here requires the Supruser appto be installed to authorize su requests. Otherwise they'll always be denied. Other su binaries might not require it, but then all apps have root access which isn't really a good thing.
Click to expand...
Click to collapse
Yes same as above, the question is not whether we need SU app (I know we do), but whether we needed to type the additional commands:
adb shell
su
mount -t rfs -o remount,rw /dev/block/stl9 /system
cp /system/bin/su /system/bin/jk-su
exit
What do these commands do? It seems to me my Superuser app is working fine with wifi tether - popping up with allow / disable permission boxes, etc. Do these commands add something else to Superuser?
Did you authorize Titanium Backup when the Superuser prompt came up (requies the Superuser app to be instald too)?
Titanium Backup has an option to download and install it's preferred version of busybox. Follow the prompts to do that.
Click to expand...
Click to collapse
There was no Superuser prompt during the install of the app, nor anytime when it said it had a failure with root access. However there is an option to install BusyBox, which I have not done yet, because I am not sure what busybox is, or what it does. I'd like to find out why I need it and what it does, so I can feel comfortable with installing it.
Thanks again.
echo "root::0:0:root:/data/local:/system/bin/sh" > /etc/passwd
echo "root::0:" > /etc/group
you need to do that in a shell to make sure su works properly.
I'm updating the one click root right now to be less silly.
http://forum.xda-developers.com/showpost.php?p=8543226&postcount=455
I just cleaned up the one click root to not do many of the silly things joeykrim's root does. It also means your system will be mounted as rw after a reboot and it won't overwrite your su with jk-su every boot (no more modified playlogo).
Cleaned up all the old stuff from the root so it should work fine even if you were using one of the older one clicks. I made sure su works, incl titanium backup.
I'm still installing superuser.apk to /system/app because I think it belongs there.
Thanks for doing the footwork, mkasick!
Firon said:
http://forum.xda-developers.com/showpost.php?p=8543226&postcount=455
I just cleaned up the one click root to not do many of the silly things joeykrim's root does. It also means your system will be mounted as rw after a reboot and it won't overwrite your su with jk-su every boot (no more modified playlogo).
Cleaned up all the old stuff from the root so it should work fine even if you were using one of the older one clicks. I made sure su works, incl titanium backup.
I'm still installing superuser.apk to /system/app because I think it belongs there.
Thanks for doing the footwork, mkasick!
Click to expand...
Click to collapse
Firon- why are these lines still needed?
Code:
adb push playlogo /system/bin/playlogo
what is playlogo? Does this just put the stock one back in case you used the joeykrim method in the past?
Code:
adb push remount /system/xbin/remount
Are the remount scripts still needed?
Code:
adb shell ln -s /system/xbin/su /system/bin/su
why is this link needed? why cant su just be in xbin
thanks in advance!
Code:
jimmyz said:
Firon- why are these lines still needed?
Code:
adb push playlogo /system/bin/playlogo
what is playlogo? Does this just put the stock one back in case you used the joeykrim method in the past?
Click to expand...
Click to collapse
This is just pushing the stock playlogo, since joeykrim's method overwrites it with some custom script.
Code:
adb push remount /system/xbin/remount
Are the remount scripts still needed?
Click to expand...
Click to collapse
The script allows you to easily remount system as ro or rw at will. Why not?
Code:
adb shell ln -s /system/xbin/su /system/bin/su
why is this link needed? why cant su just be in xbin
Click to expand...
Click to collapse
I don't know if any apps depend on it being in a particular location. It is in xbin, but I'm also linking it to /system/bin to be safe.
AndroidSPCS said:
What do these commands do? It seems to me my Superuser app is working fine with wifi tether - popping up with allow / disable permission boxes, etc. Do these commands add something else to Superuser?
Click to expand...
Click to collapse
These commands were necessary to get Superuser working with the old joeykrim root method. They're not necessary with this method (or the newly released one-click). In other words, if wifi-tethering is already working for you, nothing further is needed to be done.
AndroidSPCS said:
There was no Superuser prompt during the install of the app, nor anytime when it said it had a failure with root access.
Click to expand...
Click to collapse
I don't actually use TitaniumBackup. I'm not sure why its superuser-requirements would be different from other apps, but I guess it is. The new one-click appears to address this.
AndroidSPCS said:
However there is an option to install BusyBox, which I have not done yet, because I am not sure what busybox is, or what it does. I'd like to find out why I need it and what it does, so I can feel comfortable with installing it.
Click to expand...
Click to collapse
Busybox is a suite of "familar" Unix command-line utilites (things like cp (copy), mv (move), ls (list), etc.). It targets embedded platforms by being very featureful, yet relatively small. It's installed and used on a wide variety of embedded devices including wireless routers, print servers, phones, even televisions.
Oddly enough, Android does not include busybox by default. Instead it comes with it's own utility-programs-package called "toolbox" that isn't nearly as featureful, and quickly becomes a pain to use. Some programs, like TitaniumBackup depend on busybox programs/features, and thus require it's installation. It's safe.
The only problem with busybox is that there's not one single version of it. There's multiple builds of it from the same source code with different sets of features turned on and off. In the past, some folks had a version of busybox installed that didn't contain all the features necessary to support TitaniumBackup, so they added the option to install their own version. It's installed in a separate location, so it won't overwrite any version you do have installed, and it's safe to do. But if you've already installed another version of busybox that does work, then it may be unnecessary.
I did the Jokeyrim method a few days ago. I installed a new kernal and now a new ROM. All seems ok, but ow when I do the "whoami" command in adb shell I get whoami not found. I don't think I'm really rooted anymore. Any attempt to reinstall the Jokeyrim root script results in failure (mostly "device not found" errors). When in adb shell, most commands I type now are either "not found" or "permission denied", so I'm not confident that I'm really rooted now.
Since I have / had Jokeyrim installed, how can I "uninstall" it so that I can use this method of rooting instead? BTW, the newest Clockworkmod is installed and working.
Do I need to flash to stock first? Sorry, but I'm a VERY STOOPID NOOB.
I would like to set my phone to europe.pool.ntp.org becouse it's default northamerica.pool.ntp.org
How can I edit this file ? When I try to type adb shell to terminal it gives me an error message.
Thanks
Not development related moved to General
At first U must root R phone and then install Root Explorer. After that go to SYSTEM/ETC/
Here u need to edit GPS.CONF file and change NTP Server from northamerica.pool.ntp.org to europe.pool.ntp.org.
I hope that I help U m8.
Get write acces in system folder
I used the post I've quoted down here. After you have gained write acces in the system folder you can edit gps.conf!
octy said:
By default the /system is mounted in read-only mode.
With 'root' access you can change this.
First 'root' your phone with tutorial 'slumpolo' has provided at
the begining of this thread.
Then open a shell on your phone with adb
Code:
adb shell
Grant 'root' access with 'su' command and have a look of memory partitions
Code:
su
mount
In 'mount' command output, identify the partition on which /system was mounted.
In my phone it was '/dev/block/stl6'
Finally you can remount it to get read-write permissions on it.
But before be sure to be outside /system in the shell (by typing 'cd /' for example).
Code:
mount -o remount,rw /dev/block/stl6 /system
Do the modification you want..... BECAREFUL of want you do, you can damage your phone.
Set read-only mode again
Code:
mount -o remount,ro /dev/block/stl6 /system
Sorry I cannot made any snapshot for the moment, I can't use my phone.
Hope it can help you.
Click to expand...
Click to collapse
By the way, for Slovakia I think you can better change to sk.pool.ntp.org
Complete list of European NTP servers:
http://www.pool.ntp.org/zone/europe
Other area's:
http://support.ntp.org/bin/view/Servers/NTPPoolServers
LeoApollo said:
By the way, for Slovakia I think you can better change to sk.pool.ntp.org
Complete list of European NTP servers:
http://www.pool.ntp.org/zone/europe
Other area's:
http://support.ntp.org/bin/view/Servers/NTPPoolServers
Click to expand...
Click to collapse
I see, probably I can use also CZ, HU, AT, DE or SK or EU .. I've red that the best is with more sites.
"After you have gained write acces " How can I gain write access ? I have rooted - but Adb shell doesn't work, did I missed something ? Thaks
nastyba said:
"After you have gained write acces " How can I gain write access ? I have rooted - but Adb shell doesn't work, did I missed something ? Thaks
Click to expand...
Click to collapse
i think yes adb is for the PC. it is part of the android sdk tools.
i did that on my desire (it should be same) but i have problem i edit and save file and now i cant see it
i can see that backup file but how do i restore it?
i tried create new file it wont work i cant see it (it says file created sucessfuly)
aantdesign said:
At first U must root R phone and then install Root Explorer. After that go to SYSTEM/ETC/
Here u need to edit GPS.CONF file and change NTP Server from northamerica.pool.ntp.org to europe.pool.ntp.org.
I hope that I help U m8.
Click to expand...
Click to collapse
U can use adb on Win or linux or qtadb.
Give these commands on adb shell..
su
mount -o remount,rw /dev/block/stl6 /system
exit
exit
adb pull /system/etc/gps.conf
Edit the gps.conf the way u like.
Then mount again in rw mode.
adb push gps.conf /system/etc/gps.conf
adb reboot
Done.
moved
new post @sgs2
nastyba said:
I would like to set my phone to europe.pool.ntp.org becouse it's default northamerica.pool.ntp.org
How can I edit this file ? When I try to type adb shell to terminal it gives me an error message.
Thanks
Not development related moved to General
Click to expand...
Click to collapse
U can use the apo "FasterFix" from market.
arunmcops said:
U can use the apo "FasterFix" from market.
Click to expand...
Click to collapse
Thanks for the tip much easier to change with this application done in seconds
The guide for deodexing SGSII (http://forum.xda-developers.com/showthread.php?t=1113937) works also for SGS+ (rooted of course).
I used xUltimate version v.2.3.1 for successful deodexing of rooted I9001XXKP4 ROM.
Hello
I only know deodexing merge *.apk and *.odex files.. What will i get if i deodex my rom ? Run faster ?
XER0123 said:
Hello
I only know deodexing merge *.apk and *.odex files.. What will i get if i deodex my rom ? Run faster ?
Click to expand...
Click to collapse
Deodexing actually makes the ROM a bit slower (at least on the first boot). The main advantage is that it makes customization (themes, icons etc.) easier.
The UOT Kitchen claims to support also odexed stock ROMs (and now also TouchWiz ROMs), has anyone tried it with SGS+? (worked fine with my deoxeded ROM).
Maigel said:
Deodexing actually makes the ROM a bit slower (at least on the first boot). The main advantage is that it makes customization (themes, icons etc.) easier.
The UOT Kitchen claims to support also odexed stock ROMs (and now also TouchWiz ROMs), has anyone tried it with SGS+? (worked fine with my deoxeded ROM).
Click to expand...
Click to collapse
I tried with my odexed rom and it works.
I'm stuck on
* Checking Phone ROM Build.... *
* Waiting for Phone... *
I have Android SDK and JDK installed. Ideas?
Thanks
karo_96 said:
I'm stuck on
* Checking Phone ROM Build.... *
* Waiting for Phone... *
I have Android SDK and JDK installed. Ideas?
Thanks
Click to expand...
Click to collapse
Oh, I forgot to enable USB Debugging. Now all is okey, but I can't copy folders to internal sd
Thanks in advance
karo_96 said:
Oh, I forgot to enable USB Debugging. Now all is okey, but I can't copy folders to internal sd
Thanks in advance
Click to expand...
Click to collapse
The phone is connected to PC in mass storage mode? You should see (at least in Windows) internal SD mounted as normal removable disk and then you can just copy & paste those folders from your PC.
If you're satisfied with UOT Kitchen possibilities and have no plans for other customization then you don't gain much by deodexing.
Okey, thanks, but when I write "adb shell" in cmd it returns
'adb' is not recognized as an internal or external command,
operable program or batch file.
karo_96 said:
Okey, thanks, but when I write "adb shell" in cmd it returns
'adb' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse
Locate your adb.exe (you did install Android SDK didn't you) and add it to your PATH (or execute <install dir>\abd.exe).
Maigel said:
Locate your adb.exe (you did install Android SDK didn't you) and add it to your PATH (or execute <install dir>\abd.exe).
Click to expand...
Click to collapse
Oh, Thanks, this step is now ok, but still not working :S
When I write cp /sdcard/done_app/* /system/app/ in cmd, it returns "Permision Denied"
is the UOT kitchen working on galaxy i9001?
awesome, i'm going to check it out now!
karo_96 said:
Oh, Thanks, this step is now ok, but still not working :S
When I write cp /sdcard/done_app/* /system/app/ in cmd, it returns "Permision Denied"
Click to expand...
Click to collapse
You need to execute these commands first as adviced:
su
stop
mount -o remount rw /system
Maigel said:
You need to execute these commands first as adviced:
su
stop
mount -o remount rw /system
Click to expand...
Click to collapse
Yes, but look the screenshot: http://img851.imageshack.us/img851/9163/screenshotpgd.png
karo_96 said:
Yes, but look the screenshot: http://img851.imageshack.us/img851/9163/screenshotpgd.png
Click to expand...
Click to collapse
Can someone help me?
karo_96 said:
Can someone help me?
Click to expand...
Click to collapse
When you enter the 'su' command first time via adb shell, you have to check the phone screen - the Superuser app is requesting permission for the command (and you'll have to grant it of course to continue).
i tried to deodex my device
but somehow i stuck on the last step
Code:
adb shell
$ su
# stop
# mount -o remount rw /system
# rm /system/app/*.odex
# rm /system/framework/*.odex
# cp /sdcard/done_app/* /system/app/
# cp /sdcard/done_frame/* /system/framework/
# mount -o remount ro /system
# reboot
when i try to enter " cp /sdcard/done_app/* /system/app/ "
a message shows up: cp: not found
well after that my phone starts into a bootloop
any suggestions how to solve this cp: not found ??
Blumdum said:
when i try to enter " cp /sdcard/done_app/* /system/app/ "
a message shows up: cp: not found
well after that my phone starts into a bootloop
any suggestions how to solve this cp: not found ??
Click to expand...
Click to collapse
Install Busybox first (Busybox installer can be found from Market)?
i had busybox on my phone as far as i know
Blumdum said:
i had busybox on my phone as far as i know
Click to expand...
Click to collapse
Maybe you have installed it in a way that no symbolic links to commands have not been created? Does "/system/xbin/busybox cp" work?
i installed it like 10 min ago
and this " /system/xbin/busybox cp " works
tomorrow i try it again to deodex my device
edit:
thanks not it worked
Hello every one... I rooted the gear 2 and installed a custom tone... now question is, how do i remove them??
jlopez1286 said:
Hello every one... I rooted the gear 2 and installed a custom tone... now question is, how do i remove them??
Click to expand...
Click to collapse
Use the rm path/filename command to delete, just like DOS.
JimSmith94 said:
Use the rm path/filename command to delete, just like DOS.
Click to expand...
Click to collapse
I tried this command.
sdb root on
sdb shell mount -o remount,rw /
sdb rm /opt/share/settings/Alerts/stock_sound.ogg
sdb shell mount -o remount,ro /
is that correct??
.
jlopez1286 said:
I tried this command.
sdb root on
sdb shell mount -o remount,rw /
sdb rm /opt/share/settings/Alerts/stock_sound.ogg
sdb shell mount -o remount,ro /
is that correct??
.
Click to expand...
Click to collapse
Looks good to me, but I haven't tried to delete anything.
JimSmith94 said:
Looks good to me, but I haven't tried to delete anything.
Click to expand...
Click to collapse
I need to figure this out cuz i tried it again and no go...
jlopez1286 said:
I need to figure this out cuz i tried it again and no go...
Click to expand...
Click to collapse
"sdb ls /opt/share/settings/Alerts/stock_sound.ogg" should do a DIR of the file to be sure the file exists. You might have missed or added a capitalized letter. Unix/Linux are case sensitive.
"sdb ls /opt/share/settings/Alerts/" should give you a DIR of the whole directory so you can double check the spelling.
JimSmith94 said:
"sdb ls /opt/share/settings/Alerts/stock_sound.ogg" should do a DIR of the file to be sure the file exists. You might have missed or added a capitalized letter. Unix/Linux are case sensitive.
"sdb ls /opt/share/settings/Alerts/" should give you a DIR of the whole directory so you can double check the spelling.
Click to expand...
Click to collapse
what if the terminal tells you "unsupported command: rm"
jlopez1286 said:
what if the terminal tells you "unsupported command: rm"
Click to expand...
Click to collapse
Sorry, I'm only guessing now. Try "sdb shell rm /opt/share/settings/Alerts/stock_sound.ogg" Same with the ls commands.
that worked!!! thanks!!