hello
I am from pakistan.I have GT-P3100 tab during rooting my system crashed and its firmware corrupted .now i don't now which is firmware is on my tab what i can do now .
Now on screen only error massage "Firmware upgrade encountered an issue .please recovery mode in Kies try again"
but in Kies it not connected and i don't know about it all detail like country ,PDA,CSC and MODEM.
till me how i can get it or how can i reinstall firmware and which one.
mtariqniaz said:
hello
I am from pakistan.I have GT-P3100 tab during rooting my system crashed and its firmware corrupted .now i don't now which is firmware is on my tab what i can do now .
Now on screen only error massage "Firmware upgrade encountered an issue .please recovery mode in Kies try again"
but in Kies it not connected and i don't know about it all detail like country ,PDA,CSC and MODEM.
till me how i can get it or how can i reinstall firmware and which one.
Click to expand...
Click to collapse
go to sammobile http://www.sammobile.com/firmwares/ ANY FIRMWARE SHOULD WORK AS LONG AS IT IS FOR GT-P3100. FLASH WITH ODIN EXTRACT THE FILE AND PUT IT IN PDA IN ODIN. CONNECT PHONE PRESS START
May be u can help us. Choice one firmware to get out from this problem.
Related
Problem after failed firmware update.
I tried to Update my Samsung Galaxy S2 (GT-I9100G) using Odin 1.85
the Phone shut down before finishing the update. At that point I could not start my S2 the only picture I got was a black screen with a phone a “!” in a yellow triangle and a computer. I tried to upload the firmware again with Odin but it failed every time. I tried using Kies but it could not find the phone. I googled the problem to find a solution that could work and I tried several solutions without luck. But at last i tried the following advice see link:
xda-developers - View Single Post - [Q] Firmare upgrade encountered an issue - Am i done for?
I downloaded the .tar file that was referred to:
KERNEL_XWLPO.tar
and Odin worked and this file was downloaded. The problem is that now i only get the start page with the text Samsung Galaxy S2 with a yellow triangle "!" in the bottom. I tried plugging it to the USB port on my computer but it can't see the phone anymore and Odin and Kies can't see it so I can't upload another firmware.
Please help, I am desperate
Samsung s2 firmware upgrade error [SOLUTION]
greenland samsung said:
Problem after failed firmware update.
I tried to Update my Samsung Galaxy S2 (GT-I9100G) using Odin 1.85
the Phone shut down before finishing the update. At that point I could not start my S2 the only picture I got was a black screen with a phone a “!” in a yellow triangle and a computer. I tried to upload the firmware again with Odin but it failed every time. I tried using Kies but it could not find the phone. I googled the problem to find a solution that could work and I tried several solutions without luck. But at last i tried the following advice see link:
xda-developers - View Single Post - [Q] Firmare upgrade encountered an issue - Am i done for?
I downloaded the .tar file that was referred to:
KERNEL_XWLPO.tar
and Odin worked and this file was downloaded. The problem is that now i only get the start page with the text Samsung Galaxy S2 with a yellow triangle "!" in the bottom. I tried plugging it to the USB port on my computer but it can't see the phone anymore and Odin and Kies can't see it so I can't upload another firmware.
Please help, I am desperate
Click to expand...
Click to collapse
"Nothing to worry dude ,just follow these simple steps if you are using samsung s2 i9100 international version ,just download the Siyah kernel .tar file and flash it with odin ,you can just google siyah kernel to get the latest kernel and this will remove your firmware upgrade error and you can easily go into the download mode and can further upgrade the device by download jelly bean version of your related device .THANKS
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
i got a Samsung Note N7000 which is bricked when upgrading to ICS..
now it wont boot and i am getting a message on screen "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
i am able to take it to Download mode....
so i downloaded stock rom of ICS and GB from Xda forum...
now i used Odni and i was try to Recover with ICS and GB stock roms but Odni is saying Failed after some time...
is there any other way to recover.... even Kies is not detecting my note in recovery mode
:crying::crying::crying::crying::crying::crying:
groovybluedog said:
How old is your device bro? And which country do you live in?
Click to expand...
Click to collapse
mine is one year old mobile which i gotit from UK and i live in india....
i am using Odin to flash , when factoryfs.img is gets started to load on mobile odin saying faild
Problem solved
PROBLEM SOLVED
THANKS TO Dr.KETAN because of him this problem for me has been solved
Below is the step-wise description.
WHAT HAPPENED:-
01.) I was on ROOTED GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1
02.) I decided to install Alliance ROM => AllianceROM_JB_N7000XXLSZ-v3 and by mistake and just out of habit instead of using ROM Customizer, I used Mobile ODIN with WIPE (ALL of them) Selected.
03.) Although ODIN didn't came up with any errors and showed installation successful, my phone was stuck on the first screen "SAMSUNG GALAXY NOTE GT-7000" screen.
04.) After waiting for about 30-40 mins. I took out battery, took out memory card and tried to reboot again but no luck.
05.) I tired to recover by re-installing/rolling back to ROM I was on i.e. GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1, but ODIN Shows an error saying "PARAMETER INCORRECT" (screen shot attached)
06.) I then tried to install
GT-N7000 ICS 4.0.4 PDA-DDLR9 CSC(K)-ODDLR3 M-DDLR1 but ODIN failed (Screen Shot Attached)
GT-N7000 GB 2.3.6 PDA-DDLB2 CSC(K)-DDLA1 M-
07.) Now my phone is stuck in two modes only i.e.
7.1.) "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
7.2.) Download MODE
Dr. KETAN"S HELP (WHAT NEEDS TO BE DONE)
01.) Remove .MD5 from extension of ROM and keeping .TAR as extension help me got rid of the "THE PARAMETER IS INCORRECT" error.
02.) Go to Task Manager and close/disable/end process following service
02.1) KIES
02.2)FIREWALL
02.3)ANTI-VIRUS
03.) In ODIN (on PC) Select PDA do not select PHONE (this was my mistake too)
04.) In case you had/have HEIMDALL on your system , go to Device Manager (from Control Panel) and un-install the Generic Device driver
05.) Now try to install the stock ROM you have (it should get installed , at-least this happened in my case.)
WHAT IS TOTALLY USELESS ?
01.) KIES
02.) You PANICKING and FREAKING OUT
WHAT I CAN'T DO:-
01.)Visiting Samsung shop/service station
Please find the attached link to the screen shot. https://plus.google.com/photos/11509...978?banner=pwa
THANKS TO Dr. KETAN again for his HIGHLY appreiciated, respected and well needed help and guidance.
Hi Everybody,
Im a newbie from Vietnam. I just rooted my Galaxy Note 10.1. Then I used Odin to update Rom but it failed. Now When i turn on my tablet, it says: " Firmware update encountered an issue. Pls select recovery mode in Kies and try again"
But Kies cant recognize my tablet and I cant find recovery mode in Kies
I can log into Dowloading mode. But Odin always says "Fail" when I update rom. I've tried so many many times with different kind of Rom but its unuseful. Now my table is still dying.
Anybody knows how to solve this pro? hu hu hu:crying::crying::crying:
What file are you using at what point does Odin fail what Note model all useful information .
jje
JJEgan said:
What file are you using at what point does Odin fail what Note model all useful information .
jje
Click to expand...
Click to collapse
My tablet is Galaxy Note 10.1 GT-N8000. Odin said "Get PIT for mapping." then "Removed" then "Complete operation failed"
(I didnt unconnect the tablet). I tried with Rom "Samsung-Updates.com-GT-N8000-ITV-N8000XXCLL3-1355298096" and other Roms but same problem. Odin is Odin3 v3.04 (ever tried with odin3 v1.85 but also failed)
I flashed recovery-cwm-touch-6.0.1.9-n8000 also failed
What should I do now?
Service centre or research PIT files .
jje
Kill kies, better yet, uninstall it... Try again...
Also make sure the rom you are trying to install isn't corrupt. I find using ODIN 3.04/7 best as it does a n MD5 check before it flashes the rom...
It was solved. My tablet is alive. Tks everybody
My samsung tab 7.7 got stuck at samsung logo.
I had download latest firmware and software Odin3 v3.09 from official sammobile website.
Once I try to flash the latest firmware (P6800DXMD3_P6800OLBMD3_XME) using Odin3 v3.09, the message 'complete (write) operation failed' appear (see the attachment).
I also try to flash with previous firmware (P6800DXLP8_P6800OLBLP7_XME) but failed.
I had remove the battery cable and reconnect, flash again also failed.
Can anybody help me to solve this problems.
Is it firmware or hardware problems?
I'm facing the same problem only in my condition its a Galaxy Tab 7.0 P3100, and my aunt was watching some movie and listening to some music and suddenly it started rebooted. So i try to flash and it was stuck in the same screen as above posted. Odin stopped at the "NAND Write" part. I waited for 20 mins or so but it wasn't progressing so closed the Odin (I know its my stupidity).
And now it is showing Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again with a BIG YELLOW TRIANGLE in the center.
Now neither I can't turn it off nor take it to download mode or anything. Even though i hold down the power button, It goes back to the last screen.
Please Help !!!
Any kind of help is appreciated.
shaham2014 said:
My samsung tab 7.7 got stuck at samsung logo.
I had download latest firmware and software Odin3 v3.09 from official sammobile website.
Once I try to flash the latest firmware (P6800DXMD3_P6800OLBMD3_XME) using Odin3 v3.09, the message 'complete (write) operation failed' appear (see the attachment).
I also try to flash with previous firmware (P6800DXLP8_P6800OLBLP7_XME) but failed.
I had remove the battery cable and reconnect, flash again also failed.
Can anybody help me to solve this problems.
Is it firmware or hardware problems?
Click to expand...
Click to collapse
I'm no expert for all these kinds of matter, but I just resolved my problem. You can visit this link http://forum.xda-developers.com/showthread.php?t=2382750 :fingers-crossed::good::laugh:
Hello,
I have a problem with My samsung galaxy tab 2 7.0 (GT-P3100).
first, it turn message that say ":crying: please select recovery mode in kies & try again".
I tried connect to my notebook but kies doesn't recognized. then, I tried flash it with odin with official firmware, and it doesn't work either.
can someone help me? please