[CWM] Clockworkmod recovery for XOLO A500L - Android General

Clockworkmod Recovery For Xolo A500L :good:
STEP-BY-STEP GUIDE
Important Note: Backup important files stored on internal
SD card of your device, so that in case a situation arises
requiring you to do a factory reset after flashing CWM
Recovery, which might delete internal sd card too, your
files will remain safe on PC.
FEEDBACK US!
It was easy to flashing Clockworkmod Recovery
★Download the Recovery file, recovery.img
and transfer it to the root of your sd card.
1
Download the Mobile Uncle Tools app from the
Google play link provided in the Downloads
section and install it.
2
Launch the Mobile Uncle Tools app from the app
drawer. It will request you for the Root
permissions.
3
Now confirm the root request by pressing on
grant . Now it will show you the app main page.
Click on the Recovery Update option in the app.
4
It will show you the search results in another
page listing the recovery.img you placed in the
root of your SD card.
5
Now click on the recovery.img. It will pop-up a
dialogue box Are Sure flash recovery! . Click Ok.
└ Note: The screen may go unresponsive for
sometime, don’t panic. It is due to the flashing of
the recovery.
6
After flashing it will ask whether to reboot into
recovery. Click Ok. It will automatically take you
into the CWM recovery.
7
Congrats, you have successfully installed the CWM
recovery on your device. :good:

djniksthehearteditor said:
hi frndz here's
the cwm recovery for XOLO A500L
flash it
and enjoy
Click to expand...
Click to collapse
works perfect thanx bro.

welcome
prajul1123 said:
works perfect thanx bro.
Click to expand...
Click to collapse
alwayz welcome bro

rooting Xolo a500l
hey guys please tell me should i root my xolo a500l before expiry date of warranty!.................waiting for reply
---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------
prajul1123 said:
works perfect thanx bro.
Click to expand...
Click to collapse
hey what benefits you have got after rooting and installing cwm recovery!...is there any custom rom for this phone,pleaseee reply..............m having ram problem nd want this device to be updatedalso

rockerz3 said:
hey guys please tell me should i root my xolo a500l before expiry date of warranty!.................waiting for reply
---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------
hey what benefits you have got after rooting and installing cwm recovery!...is there any custom rom for this phone,pleaseee reply..............m having ram problem nd want this device to be updatedalso
Click to expand...
Click to collapse
you can root your mob
whenever you want....
after flashing cwm recovery u can
take nandroid backup & install custom roms

Very nice nikhil
Haha very nice bro. a step by step guide.
btw who ported cwm to a500L?
I think you should add proer credits

noobpremium said:
Haha very nice bro. a step by step guide.
btw who ported cwm to a500L?
I think you should add proer credits
Click to expand...
Click to collapse
dont knw who made it or developed it but i knw that its not ported by you

thanks
nice work sir .
can you give me guide to port that cwm recovery?

Droidbuster said:
some recovery can cook online some need to made by ourself.
depend on your device which device you are using?
Click to expand...
Click to collapse
sir i am using
actel qt918

Droidbuster said:
i will help you.
you have to wait for 2 days ok is it ok with you:good:
Click to expand...
Click to collapse
thanks sir plz wait for some i will upload stock recovery
nice to meet you sir really xda is great place

Droidbuster said:
yup xda is a great place
i am wait when you will uplaod recovery
Click to expand...
Click to collapse
sir can you give me your fb link so its easy for me to make contact with you

Droidbuster said:
https://www.facebook.com/groups/467497913345243/684856244942741
thats my group you will find me as a admin
Click to expand...
Click to collapse
thanks sir again bye accept me in your group

djniksthehearteditor said:
Clockworkmod Recovery For Xolo A500L :good:
STEP-BY-STEP GUIDE
Important Note: Backup important files stored on internal
SD card of your device, so that in case a situation arises
requiring you to do a factory reset after flashing CWM
Recovery, which might delete internal sd card too, your
files will remain safe on PC.
FEEDBACK US!
It was easy to flashing Clockworkmod Recovery
★Download the Recovery file, recovery.img
and transfer it to the root of your sd card.
1
Download the Mobile Uncle Tools app from the
Google play link provided in the Downloads
section and install it.
2
Launch the Mobile Uncle Tools app from the app
drawer. It will request you for the Root
permissions.
3
Now confirm the root request by pressing on
grant . Now it will show you the app main page.
Click on the Recovery Update option in the app.
4
It will show you the search results in another
page listing the recovery.img you placed in the
root of your SD card.
5
Now click on the recovery.img. It will pop-up a
dialogue box Are Sure flash recovery! . Click Ok.
└ Note: The screen may go unresponsive for
sometime, don’t panic. It is due to the flashing of
the recovery.
6
After flashing it will ask whether to reboot into
recovery. Click Ok. It will automatically take you
into the CWM recovery.
7
Congrats, you have successfully installed the CWM
recovery on your device. :good:
recovery by :- varun santoshkumar
Click to expand...
Click to collapse
can u make flashable zip of it....so that any one can easily flash it

djniksthehearteditor said:
Clockworkmod Recovery For Xolo A500L :good:
STEP-BY-STEP GUIDE
Important Note: Backup important files stored on internal
SD card of your device, so that in case a situation arises
requiring you to do a factory reset after flashing CWM
Recovery, which might delete internal sd card too, your
files will remain safe on PC.
FEEDBACK US!
It was easy to flashing Clockworkmod Recovery
★Download the Recovery file, recovery.img
and transfer it to the root of your sd card.
1
Download the Mobile Uncle Tools app from the
Google play link provided in the Downloads
section and install it.
2
Launch the Mobile Uncle Tools app from the app
drawer. It will request you for the Root
permissions.
3
Now confirm the root request by pressing on
grant . Now it will show you the app main page.
Click on the Recovery Update option in the app.
4
It will show you the search results in another
page listing the recovery.img you placed in the
root of your SD card.
5
Now click on the recovery.img. It will pop-up a
dialogue box Are Sure flash recovery! . Click Ok.
└ Note: The screen may go unresponsive for
sometime, don’t panic. It is due to the flashing of
the recovery.
6
After flashing it will ask whether to reboot into
recovery. Click Ok. It will automatically take you
into the CWM recovery.
7
Congrats, you have successfully installed the CWM
recovery on your device. :good:
recovery by :- varun santoshkumar
Click to expand...
Click to collapse
can u port twrp?????????????????????????????????????????????????

Related

[TUT] Install CWM on Micromax funbook pro p500

Hello guys I recently tried many recovery.img on Funbook pro and bricked it! but finally found 1 working CWM of Micromax funbook p300 that works on our tab too..!!
Source : http://forum.xda-developers.com/showthread.php?t=1702299
Things Required -
1. Data Connection on your Tablet. (via WIFI)
2. An archieve supported file manager. Eg ES File Explorer.
3. A Usable and working mind.
Steps -
1. Download the file from the link below. ( PLEASE READ BELOW BEFORE FLASHING)
2. Extract the file to the root of your "internal sd card" and you will get 2 file First "Novotools_v1.0" and the Second "recovery.img".
3. Install the app Novotools_v1.0.
4. Run Novotools and you will see and option Flash Recovery
5. Click it and the recovey will be flashed onto your phone.
6. Reboot in recovery with the help of the application.
7. Now you have fully functional CWM recovery. ( PLEASE READ BELOW BEFORE FLASHING )
BUT WAIT ARE U STUCK ON MMX LOGO? MAKE SURE YOU DOWNLOAD THE STOCK BACKUP GIVEN BELOW PLACE IT YOUR SD CARD BEFORE FLASHING CWM UNDER external sd card ie; ext sd clockworkmod\backup\
1) AFTER INSTALLING RECOVERY
2) DO A RESTORE OF THE GIVEN BACKUP
Download -
Recovery - http://www.mediafire.com/?6wn2dow0lz9qoot
Backup - http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Credits:-
Geno for Novotools v1.0
Developer of the Recovery.img
XDA community for all the information and resources.
All the thanks hitter for all the Motivation.
Disclaimer:-
The file is not a flashable zip. Do not try and flash it.
I am not responsible in any way of this makes you tablet unusable.
HIT THANKS if u like my work
Good
At last you found it
cool.gautam said:
Hello guys I recently tried many recovery.img on Funbook pro and bricked it! but finally found 1 working CWM of Micromax funbook p300 that works on our tab too..!!
Source : http://forum.xda-developers.com/showthread.php?t=1702299
Things Required -
1. Data Connection on your Tablet. (via WIFI)
2. An archieve supported file manager. Eg ES File Explorer.
3. A Usable and working mind.
Steps -
1. Download the file from the link below.
2. Extract the file to the root of your "internal sd card" and you will get 2 file First "Novotools_v1.0" and the Second "recovery.img".
3. Install the app Novotools_v1.0.
4. Run Novotools and you will see and option Flash Recovery
5. Click it and the recovey will be flashed onto your phone.
6. Reboot in recovery with the help of the application or the old method by Holding the Home/Options and the Power button.
7. Now you have fully functional CWM recovery.
Download -
http://www.mediafire.com/?6wn2dow0lz9qoot
Credits:-
Geno for Novotools v1.0
Developer of the Recovery.img
XDA community for all the information and resources.
All the thanks hitter for all the Motivation.
Disclaimer:-
The file is not a flashable zip. Do not try and flash it.
I am not responsible in any way of this makes you tablet unusable.
HIT THANKS if u like my work
Click to expand...
Click to collapse
Great stuff. I'll write this on my blog. Is there any chances of getting your devices bricked?
ujjwalk308 said:
Great stuff. I'll write this on my blog. Is there any chances of getting your devices bricked?
Click to expand...
Click to collapse
We need a tester to assure that! didn't brick mine
cool.gautam said:
We need a tester to assure that! didn't brick mine
Click to expand...
Click to collapse
Gautam, You should provide the link and tutorial of Livesuit with Chinese firmware in case of brick. so testers can take risk of trying this..
and as i know you and joby both are successfully installed CWM from Chinese ROM aren't you?
so as a suggestion please include that tutorial in this post just in case..
-Susheel
thatsgamer said:
Gautam, You should provide the link and tutorial of Livesuit with Chinese firmware in case of brick. so testers can take risk of trying this..
and as i know you and joby both are successfully installed CWM from Chinese ROM aren't you?
so as a suggestion please include that tutorial in this post just in case..
-Susheel
Click to expand...
Click to collapse
Will do buddy....!! New method is tried by one member at facebook so i think its working but still will create it!
Video of Rooting/CWM
Gautam do you have the video of CWM installation? Want to view before I go ahead with the process..
kirankowshik said:
Gautam do you have the video of CWM installation? Want to view before I go ahead with the process..
Click to expand...
Click to collapse
Nope....If u somehow brick the device! ( u wont if u follow my steps clearly)
then just follow my how to unbrick tutorial!
cool.gautam said:
Nope....If u somehow brick the device! ( u wont if u follow my steps clearly)
then just follow my how to unbrick tutorial!
Click to expand...
Click to collapse
Can you provide the unbrick tutorial link? http://forum.xda-developers.com/search.php?searchid=78222300 is not working.
+1
I have rooted my P500 by 'unlock root' methoed. can I install this CWM following above procedure. I have read in some post here, following installation method of P300, may result in some brick for P500. thanks in advance.
I have rooted P500 biu now I want to go back and flash original ROM. how to do ?
dsmas said:
I have rooted P500 biu now I want to go back and flash original ROM. how to do ?
Click to expand...
Click to collapse
Have u installed any custom rom? which ? There in only one
But if you simply rooted it nothing else! you are already on stock rom!
cool.gautam said:
Have u installed any custom rom? which ? There in only one
But if you simply rooted it nothing else! you are already on stock rom!
Click to expand...
Click to collapse
Thanks. there are 2 models of funbook p300 and p500. most of the posts are for p300 since p500 is relatively new. As you said it is stock rom but after rooting and with the help of romtoolbox pro, I have removed most of the applications including educative lessions. therefore I wish to have a device as it was given at the showroom.. I hope you got my point.
dsmas said:
Thanks. there are 2 models of funbook p300 and p500. most of the posts are for p300 since p500 is relatively new. As you said it is stock rom but after rooting and with the help of romtoolbox pro, I have removed most of the applications including educative lessions. therefore I wish to have a device as it was given at the showroom.. I hope you got my point.
Click to expand...
Click to collapse
Ohk...Currently we dont have full stock rom! but apps can be recovered! Just install CWM and restore backup provided by me!
Help Meee
i bricked my device then recovered it by using livesuit nd insallin de chinese firmware....nd then recovered the stock ROM....nw my wifi driver is not working....some one pls give me a stock FIRMWARE of Micromax funbook Pro....or some other compatible firmware.....
not working for me ! i downloaded the .zip file and extracted it in sd card(not externel i m talking about internet 8 gb) via pc aand i saw two files novotools.apk and recovery.img and i installed the apk and den clicked on flash recovery and after clicking on flash recovery below came flash recovery and nothing happened den i thought i must check and den clicked on reboot to recovery den also nothing happened ! so i switched off my tab and den went o recovery manually der it was android system recovery ! plzz help me !
i am stuck at funbook logo. please help. now it doesn't move further. please tell me the solutions for it!
Thanks!
yooray said:
i am stuck at funbook logo. please help. now it doesn't move further. please tell me the solutions for it!
Thanks!
Click to expand...
Click to collapse
Chill bro see how to unbrick funbook pro thread And follow the steps ! I also bricked my funbook pro but recovered it back if u need any help or u r stuck at any step just PM ME
Stock backup
cool.gautam said:
Hello guys I recently tried many recovery.img on Funbook pro and bricked it! but finally found 1 working CWM of Micromax funbook p300 that works on our tab too..!!
Source : http://forum.xda-developers.com/showthread.php?t=1702299
Things Required -
1. Data Connection on your Tablet. (via WIFI)
2. An archieve supported file manager. Eg ES File Explorer.
3. A Usable and working mind.
Steps -
1. Download the file from the link below. ( PLEASE READ BELOW BEFORE FLASHING)
2. Extract the file to the root of your "internal sd card" and you will get 2 file First "Novotools_v1.0" and the Second "recovery.img".
3. Install the app Novotools_v1.0.
4. Run Novotools and you will see and option Flash Recovery
5. Click it and the recovey will be flashed onto your phone.
6. Reboot in recovery with the help of the application.
7. Now you have fully functional CWM recovery. ( PLEASE READ BELOW BEFORE FLASHING )
BUT WAIT ARE U STUCK ON MMX LOGO? MAKE SURE YOU DOWNLOAD THE STOCK BACKUP GIVEN BELOW PLACE IT YOUR SD CARD BEFORE FLASHING CWM UNDER external sd card ie; ext sd clockworkmod\backup\
1) AFTER INSTALLING RECOVERY
2) DO A RESTORE OF THE GIVEN BACKUP
Download -
Recovery - http://www.mediafire.com/?6wn2dow0lz9qoot
Backup - http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Credits:-
Geno for Novotools v1.0
Developer of the Recovery.img
XDA community for all the information and resources.
All the thanks hitter for all the Motivation.
Disclaimer:-
The file is not a flashable zip. Do not try and flash it.
I am not responsible in any way of this makes you tablet unusable.
HIT THANKS if u like my work
Click to expand...
Click to collapse
did this stock backup files must always be there or I can delete this after installation of new rom

[MOD] Swap without root (Use external sd as internal sd card without rooting)

This thread is made for multiple devices.​
I'll make files to swap, i.e Use Externel Sd card as Internel Sd card which are flashable via stock recovery without rooting.​
For those who doesnt want to root.
Currently supported devices:-
1.)Mediatek mt6589 devices
2.)Mediatek mt6577 devices
3.)Vega racer im770k
​
P.S:- If you want to request a device, do upload
vold.fstab
from /system/etc folder of your android.
Please mention you DEVICE MANUFACTURER and DEVICE MODEL.
EX:- "MICROMAX A116" not just "MMX A116" or "a116"
Click to expand...
Click to collapse
Procedure
HOW TO:-​​
1.) Download test file from Post no. 3/4 meant for your device.
2.)Place update.zip in / folder (main folder) of your Internel Sd card.
3.)Switch off phone and boot in Recovery (you should know how to).
4.)Choose option to
Apply update.zip from sdcard.
5.)Let it complete.
A yellow line will appear and thean a message will come "Installation complete"
6.)Switch on your phone and see magic in storage section of settings.
​
In stock recovery:-
To change options, press volume up and down.
To select 'install from sd card' option press power buttons to select.
Select update.zip using same method, after installation, it says installation complete.
Downloads
DOWNLOADS:-
1.) Micromax A116, Gionne d1 and most of mediatek mt6589 devices.
If you get any error try <<<<this>>>
2.)Mediatek mt6577 devices
3.)Vega racer im770k
4.)Denver TAD 10021
​
Flash back
How to get original storage:-
1.)Download the file from below place in sdcard
2.)Flash via recovery as explained in post no.2
Downloads:-
1.)Mediatek mt6589 devices.
2.)Mediatek mt6577 devices.
3.)Vega racer im770k
http://www.4shared.com/file/G1OmX3Gg/vold.html device "gionee dream d1" plz add this
Link is not openings..please check
sent from My Canvas HD
Anands3 said:
Link is not openings..please check
sent from My Canvas HD
Click to expand...
Click to collapse
its opening
where is download link
Working.......
Vega racer im770k, plz add this.
thanks a lot
Works Perfectly on A116
Hi
This solves elegantly a hair-pulling issue of having to swap the storage partitions, without rooting...
Was extremely helpful since due to our corporate limitations, our android phones cannot be rooted since we run Good for Enterprise (Good Enterprise GFE )
So it was a matter of either choosing GFE or storage... this solves
THANK YOU! THANK YOU! THANK YOU!
luckydogra said:
its opening
Click to expand...
Click to collapse
Plz help me:good:
XivilidMohamed said:
Plz help me:good:
Click to expand...
Click to collapse
check post no. 3 @XivilidMohamed
Work fine. Tks again.
i am getting this error agian and agian .. please help !
-- Install /sdcard ...
Installation aborted.
Micromax A116 (Canvas HD)
I am getting error as "installation aborted ".
I have placed update. zip on sdcard and when I try to install it gives error. am using mmx canvas hd
Denver TAD 10021 JB 4.1.1
Can you please change my vold?is for denver tad 10021 with jb 4.1.1 rooted.thank you
http://www.mediafire.com/?9x8fd88eeoej38j
rohitsaini929 said:
i am getting this error agian and agian .. please help !
-- Install /sdcard ...
Installation aborted.
Micromax A116 (Canvas HD)
Click to expand...
Click to collapse
bahubali67 said:
I am getting error as "installation aborted ".
I have placed update. zip on sdcard and when I try to install it gives error. am using mmx canvas hd
Click to expand...
Click to collapse
I think problem is with firmware version, u should update to latest firmware 0.20
@rohitsaini929 @bahubali67 link to latest .20 firmware
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V2_250413/
download from here or go to service center.
how to flash <<http://www.droidacid.com/how-to-unroot-get-back-to-stock-rom-on-micromax-canvashd-a116/>>
jajss said:
Can you please change my vold?is for denver tad 10021 with jb 4.1.1 rooted.thank you
http://www.mediafire.com/?9x8fd88eeoej38j
Click to expand...
Click to collapse
CHECK POST N0.3
luckydogra said:
I think problem is with firmware version, u should update to latest firmware 0.20
CHECK POST N0.3
Click to expand...
Click to collapse
can you please provide any link or details to update firmware
right now my phone is running Jellybean 4.1.2
---------- Post added at 10:45 PM ---------- Previous post was at 10:06 PM ----------
i have downloaded this file S9201_MP_F4_B1_IN_MMX_0.20__flasher_user.rar this is new firmware ?
luckydogra said:
I think problem is with firmware version, u should update to latest firmware 0.20
@rohitsaini929 @bahubali67 link to latest .20 firmware
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V2_250413/
download from here or go to service center.
how to flash <<http://www.droidacid.com/how-to-unroot-get-back-to-stock-rom-on-micromax-canvashd-a116/>>
CHECK POST N0.3
Click to expand...
Click to collapse
thank you for your work but this vold(denver tad 10021) dont work for me.after flash the update.zip my tablet dont boot,it stuck at android logo.but if i replace the original vold the tablet boot.i flashed with cwm6 and i try the manual method too.thank you

[ROMs and Recoveries] Karbonn Titanium S5 Plus/ S5 + - All Things And Dev.

Updates at this thread have been stopped. Please check out Devs-Lab.com for all stuff that is/was/would be here. Links below are provided for reference, and will not be updated from now.
The Official Karbonn Titanium S5 Plus Thread :
Note : This is for the Karbonn Titanium S5 Plus / Coolpad 7295C Device and Development related to it and its clones only.
Click to expand...
Click to collapse
Original Karbonn ROM :
https://tr.im/20c3b
Click to expand...
Click to collapse
Stock ROM in a flashable Zip format :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Here are the Custom Recoveries for this device :
Preferred, Tested : Philz Touch Recovery 6.57.9 ( based on ClockWorkMod Recovery v6.0.5.1 )
https://tr.im/2eae8
TWRP Recovery 2.7.1.0 ( Touch )
https://tr.im/1757c
ClockWorkMod recovery for Karbonn Titanium S5 Plus : ( Non - Touch )
tr.im/RWOT
ClockWorkMod - based recovery for Karbonn Titanium S5 Plus ( Modded by carliv @ xda )
tr.im/f2c21
Click to expand...
Click to collapse
Next, Here are the Custom ROMs
Click to expand...
Click to collapse
Sony Xperia Z:
https://www.dropbox.com/s/e8sq7s60de...nn_S5_Plus.zip
Note : The above mentioned link doesn't appear to work. If anybody finds this file link working, please add a post here and if possible, upload the file to Google Drive and Post the link here.
Click to expand...
Click to collapse
Sony Xperia Z v2:
https://tr.im/ca47d
Credits : Ajinkya Mishra
Mayank Girdhar
Click to expand...
Click to collapse
Miui v5 :
http://www.needrom.com/wp-content/up...37e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Click to expand...
Click to collapse
Lewa OS:
https://tr.im/LewaOSforS5Plus
Click to expand...
Click to collapse
MIUI v6:
https://tr.im/MIUIv6forS5Plus
Click to expand...
Click to collapse
Samsung Galaxy Note 3-themed ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Stock Flashable ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Android Lollipop-themed ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Fly UI ROM :
https://www.dropbox.com/s/8q6ap1lnht...tfors5plus.zip
Click to expand...
Click to collapse
Samsung Galaxy S5-themed ROM :
http://www.4shared.com/zip/vP4RARWOba/XtremeS5.html?
Click to expand...
Click to collapse
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
http://karbonnroms.blogspot.in
Click to expand...
Click to collapse
Note : The above posted links for ROMs are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
Click to expand...
Click to collapse
SystemUI.apk and SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyub...lus_Syste.html
Click to expand...
Click to collapse
Steps for flashing a .img file to a specific partition ( here, recovery ) :
Here are the two methods :
1st Method ( Using ADB ) -- This needs the phone to be connected to the computer.
Go to the folder containing the recovery.img file you just downloaded.
Shift + Right Click on any empty space in the folder and Select Open Command Window Here
Connect the phone to the computer and make sure you have USB Debugging enabled and not USB Storage
Type these into the Command Window :
adb devices -- This should show the Device attached as KarbonnTitaniumS5Plus-xxxx or any such line.
adb get-state -- This is to ensure USB Debugging works. It will show device, recovery or offline, but here, we would be looking for device
adb reboot bootloader -- This reboots the device into Fastboot mode, also called as HBOOT or Bootloader. This mode is necessary for flashing the recovery.img file
fastboot oem unlock -- This is to ensure that you can flash xxxx.img files to specific partitions of the device.
fastboot flash <<partitionname>> <<nameofrecoveryimagefile.img>> -- This flashes the specific partition image file to the specified partition. Here, we would be looking for something like fastboot flash recovery philzrecoverys5plus.img for the PhilZ Touch Recovery and fastboot flash recovery twrprecovery.img for the TWRP Recovery and fastboot flash recovery cwmrecoverys5plus.img for the.... Well, you understand what I mean. This should show some text on the device like Transferring Flash or Writing Flash and the Time and Speed of it, that would confirm your flashing.
fastboot reboot -- This command reboots the device into the normal system, and lo, you're ready to go !
Click to expand...
Click to collapse
From here, you can reboot to recovery and back again without any issues. This is the tried and tested method, the method which worked perfectly when I tried it on my device. Else, if you have no patience for connecting the Phone to the PC, jabbing on the keyboard and entering n number of commands, you could try this out :
2nd Method ( Using Terminal Emulator ) -- This doesn't need the phone to be connected to the computer.
Place the recovery.img file in the Internal Storage or External SD Card -- Here, I'm placing it as in storage/sdcard0/xxxxrecovery.img
Install Terminal Emulator or any such app onto the phone and Open it.
Type these commands one by one :
su -- This gives root permissions to the Command Executor.
flash_image recovery /storage/sdcard0/xxxxrecovery.img -- This flashes the recovery image file to the recovery partition.
Close the Terminal Window.
Done !
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Another Note : If you're following the Second ( Terminal Emulator ) Method, note that there is a space between flash_image and recovery and the path of the image file. The first method is the preferred one, which worked perfectly with no errors for me; while the second method is risky and might return some errors while trying it out.
Click to expand...
Click to collapse
Another Loooooong Shortened Note : The TWRP Recovery might, in some rare cases, show your battery level as 19% when it is at 99% and the same goes for the others. If you are encountering this error damn frequently, I'd recommend reverting back to the original CWM basic recovery as it doesn't show any battery info at all ! You also have the option of wiping your Battery Statistics in case the Battery Error in the Touch Recoveries made the system too show the same error. Once, after fully charging the phone to 100% and rebooting to recovery, I found that the TWRP recovery showed the battery level at 19% ! Out of curiosity, I rebooted back to the system and it too, showed it at 19% ! I just plugged it into the charger and was like Whoa !, as the battery sprang from 19% to 24% in 7 seconds flat ! I know that neither the reboot to recovery does drain out that much battery, nor does the recovery randomly perform such miracles on it. So, I just flashed CWM basic recovery to it using fastboot mode, opened it, did a Battery Stats wipe and rebooted to the System. It was back to 99% ! So, a full Battery Statistics wipe helped me solve such errors, and might do the same to you too. Just remove the battery from the phone after you power off from the recovery, put it back in, and let the phone start up. Problem Solved ! Damn, why didn't I think of this earlier ?
Click to expand...
Click to collapse
Yet Another Short-But-Not-So-Short Note : I'd recommend disabling the Boot Animation on the phone ( using ROM Toolbox Lite or Pro ) so that the possibility of bootloops is diminished. No Boot Animation = Less Chance of Bootloops !
Click to expand...
Click to collapse
One Last Note : ( Yeah, Right. )
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive...
Check this thread for further development on this device.
If anybody is willing to volunteer to try a ROM still in development for this device, you can download it here :
https://tr.im/CarbonForKarbonnv1
It is NOT READY FOR FLASHING, but is a Kitkat ROM, so anybody willing to put in their efforts in the development of this ROM can help.
Click to expand...
Click to collapse
rjt.rockx said:
The Official Karbonn Titanium S5 Plus Thread :
Note : This is for the Karbonn Titanium S5 Plus / Coolpad 7295C Device and Development related to it and its clones only.
Original Karbonn ROM :
https://tr.im/20c3b
First off, Here are the Custom Recoveries for this device :
ClockWorkMod recovery for Karbonn Titanium S5 Plus :
tr.im/RWOT
ClockWorkMod - based recovery for Karbonn Titanium S5 Plus ( modded by carliv @ xda )
tr.im/f2c21
Next, Here are the Custom ROMs
Sony Xperia Z:
https://www.dropbox.com/s/e8sq7s60de...nn_S5_Plus.zip
Note : The above mentioned link doesn't appear to work. If anybody finds this file link working, please add a post here and if possible, upload the file to Google Drive and Post the link here.
Sony Xperia Z v2:
https://tr.im/ca47d
Credits : Ajinkya Mishra
Mayank Girdhar
Miui :
http://www.needrom.com/wp-content/up...37e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
http://karbonnroms.blogspot.in
Note : The above posted links for ROMs are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
SystemUI.apk and SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyub...lus_Syste.html
One Last Note : ( Yeah, Right. )
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive...
By the way, I'll be uploading links to some must-have apps for a custom ROM user within a few days. Check this thread for further development on this device.
Click to expand...
Click to collapse
Hey there,my question might seem foolish but just wanted to know if our device supports USB otg?
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
Hey there,my question might seem foolish but just wanted to know if our device supports USB otg?
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes and No.
No, as it isn't included in the device's features and comes with no otg cable.
Yes, if you buy a third party USB OTG cable and install chainfire's stickmount app.
Here's the link to the app :
https://play.google.com/store/apps/details?id=eu.chainfire.stickmount
and the xda thread :
http://forum.xda-developers.com/galaxy-nexus/themes-apps/23-03-2014-stickmount-v3-01-t1400034
Hope it helps !
Heck is their the possibility that i might get bootloop!!!Because the last time I tried one of Chainefire's app(chain fire 3D)I got stuck on 1.But anyways thanks
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
Heck is their the possibility that i might get bootloop!!!Because the last time I tried one of Chainefire's app(chain fire 3D)I got stuck on 1.But anyways thanks
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nah, there is no possibility of getting bootloop. The app doesn't need reboot at all !
Good news !
Finally, TWRP Recovery v 2.7.1.0 has been ported to our device by... me.
It works !
Features :
Touch recovery
Navigation buttons enabled
Displays Time, Date, Battery, etc.
File Manager built in
Option to Partition SD Card
Terminal Commands supported
ADB Sideload available
Ability to reboot into System, Recovery, Bootloader or Power Off
Can mount USB Storage
Toggles:
Zip file signature verification
Usage of rm -rf instead of formatting
Skip MD5 generation during backup
Enable MD5 verification of backup files
Screen Timeout Setting
Brightness Slider
Time zone Chooser
Keyboard built-in
Uploading the recovery.img file after some time. Check this thread for further updates !
Here's the link to the TWRP Recovery :
https://tr.im/1757c
Hope it helps !
rjt.rockx said:
Here's the link to the TWRP Recovery :
https://tr.im/1757c
Hope it helps !
Click to expand...
Click to collapse
Still working on the Carbon ROM... May take a few more days to create a working,booting ROM !!!
( Creating a new update binary file now, old one wasn't working. )
Anyway, after this and the flashable stock rom zip file, i'll be porting miui 6 to this device !
After that, maybe, I was thinking of an Android L ROM for this device...
Anyway, Back to Project CarbonForKarbonn for now...
Could anyone upload the specifications of moto g (codename falcon) in a post here ?
I need to know it's features and some information abt. it, like whether it supports dual sim, has external sd card support, etc.
so that I could rectify any problems which are occuring because of such non-compatibility errors.
Looooooong schedule... this might take forever...
rjt.rockx said:
Still working on the Carbon ROM... May take a few more days to create a working,booting ROM !!!
( Creating a new update binary file now, old one wasn't working. )
Anyway, after this and the flashable stock rom zip file, i'll be porting miui 6 to this device !
After that, maybe, I was thinking of an Android L ROM for this device...
Anyway, Back to Project CarbonForKarbonn for now...
Could anyone upload the specifications of moto g (codename falcon) in a post here ?
I need to know it's features and some information abt. it, like whether it supports dual sim, has external sd card support, etc.
so that I could rectify any problems which are occuring because of such non-compatibility errors.
Looooooong schedule... this might take forever...
Click to expand...
Click to collapse
As for TWRP how should I flash it?I already have CWM so what should I do in this case? I just want to try TWRP so pls tell me how should I remove CWM.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
As for TWRP how should I flash it?I already have CWM so what should I do in this case? I just want to try TWRP so pls tell me how should I remove CWM.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to have ADB and Fastboot tools and the recovery file in the same folder.
Connect the device to the computer, open USB Debugging in Android, open a command window in the folder with adb and twrprecovery.img image ( Shift + Right Click ), and type these commands in it :
adb root -- Don't worry if this shows any error like adbd cannot run as root in production builds. Just proceed with the next step.
adb devices
adb reboot bootloader
fastboot flash recovery twrprecovery.img -- This will automatically format that partition and install the recovery image to it.
fastboot reboot
adb reboot recovery
Done !
Anyway... Building the final parts of the Carbon Nightly ROM, also simultaneously working on MIUI 6 for this device.
Stock ROM build is happening... Just have to generate the updater-script and the update binary.
Status of Each Build :
Carbon ROM : Needs a new Update Binary, creating it, coding it.
TWRP Recovery : Done !
MIUI 6 : Downloading the latest release version. Porting and Update Binary and Updater Script pending.
Stock Flashable Zip : Creating all Update files from scratch, system folder is ready, deodexing pending, App updates pending.
Xperia v3 : Boot Animation Build Progressing, Updating all stock Google apps, Adding Xposed Framework, etc.
Android L ROM : Waiting for a Stable Android L ROM to be released here, still no progress.
Here are the basic mount points of this device which I accidentally discovered while messing about in the Stock ROM :
system : [email protected] : dev/block/mmcblk0p8 -- This is for the System folder, has ext4 partition type
data : [email protected] : dev/block/mmcblk0p10 -- This is for the Data folder, has ext4 partition type
cache : [email protected] : dev/block/mmcblk0p9 -- This is for the Cache folder, has ext4 partition type
Hope it helps !
Which do you think is better : External SD Card as Main Storage or Internal SD Card as Main Storage ?
Anybody can reply by posting here.
This question is for the Carbon ROM and the Stock Flashable Zip ROM.
I felt I should ask you this question as I felt that Internal SD Card has way too less storage for me, but my decision cannot be everybody's decision, can it ?. ( I have 180+ Apps on this device, all linked to SD Card ( 32 gb, ~1.5 gb free space remaining ) ).
rjt.rockx said:
Which do you think is better : External SD Card as Main Storage or Internal SD Card as Main Storage ?
Anybody can reply by posting here.
This question is for the Carbon ROM and the Stock Flashable Zip ROM.
I felt I should ask you this question as I felt that Internal SD Card has way too less storage for me, but my decision cannot be everybody's decision, can it ?. ( I have 180+ Apps on this device, all linked to SD Card ( 32 gb, ~1.5 gb free space remaining ) ).
Click to expand...
Click to collapse
Internal SD card is always a better options.Anyways keep it up with all the developments.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
But then, what about the apps ? Wont you need that much storage for apps ?
rjt.rockx said:
But then, what about the apps ? Wont you need that much storage for apps ?
Click to expand...
Click to collapse
But any was 2 GB storage is much low.Heck I have installed so much things on my device I have been having 'storage space running out' since two weeks!Anyways try to keep the internal storage as our SD Card.
Oh and nobody seems to be active on this thread except you and me.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
But any was 2 GB storage is much low.Heck I have installed so much things on my device I have been having 'storage space running out' since two weeks!Anyways try to keep the internal storage as our SD Card.
Oh and nobody seems to be active on this thread except you and me.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah... But once I upload the ROMs which I am building, some more will definitely visit.
Hi rjt.rockx.....Thank you very much for ur hard work to make our device pretty awesome....
Plz make the ext. Sd card as main storage bcoz 2gb space s not enough for application itself.......
Wishing u all the best in ur current n future projects....:beer::beer::beer:
Sent from my GT-N8000 using XDA Premium 4 mobile app
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
Currently am using xperia v2 rom....everything works pretty good n smooth.........Eagerly waiting for ur future updates.......And one more thing , camera quality s not that good in low light. So any changes will be pretty nice too....
Sent from my GT-N8000 using XDA Premium 4 mobile app
rjt.rockx said:
Yeah... But once I upload the ROMs which I am building, some more will definitely visit.
Click to expand...
Click to collapse
Is there any way to change the on-screen soft keys to look them like that of Nexus 5 lollipop soft keys.They look really cool and other thing is the transparency of the on screen buttons.It would be great if you made this above mod in the new ROM
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
algates said:
Hi rjt.rockx.....Thank you very much for ur hard work to make our device pretty awesome....
Plz make the ext. Sd card as main storage bcoz 2gb space s not enough for application itself.......
Wishing u all the best in ur current n future projects....:beer::beer::beer:
Sent from my GT-N8000 using XDA Premium 4 mobile app
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
Currently am using xperia v2 rom....everything works pretty good n smooth.........Eagerly waiting for ur future updates.......And one more thing , camera quality s not that good in low light. So any changes will be pretty nice too....
Sent from my GT-N8000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I'm working on that. You know that camera you have in other Xperia devices with all that Timescape feature and everything ? I'm adding that to the updated version of this ROM. But, the ROM will still be based on Android Jellybean 4.2.2. I'm sorry, but there's nothing I can do about that because, if I change the base OS, I'll have to rebuild all the apps from scratch to fit alongside the new permissions and all that stuff, which will take off most of my time.
I'll consider your decision about the Main Storage, but there's one drawback about using it that way. You won't be able to remove your SD Card or unmount it while the OS is on. If that's okay with you, please reply. Anyway, if you want to change it afterwards, you can do so by the vold.fstab edit which cybercrawler had mentioned here : http://forum.xda-developers.com/showpost.php?p=55154053&postcount=31
Thanks for your opinion, by the way !

Internal Memory mod for QMobile Noir X900

Hello guys, once again I present you with a mod for our local QMobiles, this mod actually replaces your system files so you are able to use 4GB memory AND 8GB from V2, and are able to move apps to SD too!
Me or anyone mentioned in this post is not responsible for anything that happens to your phone. You choose to flash this mod, you are responsible
Click to expand...
Click to collapse
Prerequisite:
1) A rooted phone
2) Custom recovery
3) This mod.
4) Brain
How to:
Boot into recovery
take a backup
Flash the zip
Factory reset
Reboot recovery
Restore /data partition
NOTE: You need to flash this mod once only, as this isn't inuded in system or data! So custom ROMs won't affect it
Happy modding, good luck
CREDITS:
Me - created the zip
Nibras Ahmed, thanks mate!
Tested by: Mohsin - V1
Digi Drago for idea of V2
DOWNLOAD
Tested and working,
Remember to take cwm backup first, install zip, factory reset, reboot recovery, restore backup. reboot and enjoy
MZ_. said:
DOWNLOAD
Click to expand...
Click to collapse
whats the difference between these 2 mods ???
imkhalid said:
whats the difference between these 2 mods ???
Click to expand...
Click to collapse
MZ_. said:
this mod actually replaces your system files so you are able to use 4GB memory AND 8GB from V2, and are able to move apps to SD too!
Click to expand...
Click to collapse
You must read the description first.
Sent from my LG-E975 Int'l
MZ_. said:
You must read the description first.
Sent from my LG-E975 Int'l
Click to expand...
Click to collapse
ok i get it now, v1 will make 4GB apps space and v2 will make it 8GB
one more thing screenshots are too small cant see clearly
imkhalid said:
ok i get it now, v1 will make 4GB apps space and v2 will make it 8GB
one more thing screenshots are too small cant see clearly
Click to expand...
Click to collapse
Click on the pictures to expand em
Sent from my LG-E975 Int'l
Plz anyone tell is this phone worth buying? I mean the specs mentioned are genuine? The pixels of camera shows that it has 8MP rear camera while they say it's 13MP shooter.
2 questions:
1. for custom recovery, can I use the method "CWM Touch Recovery For QMobile X900 High" mentioned here -> http://mgeeky.com/root-and-install-cwm-touch-recovery-on-qmobile-x900/
2. can you please post more details of step-3 as its a little confusing since I think there are more advanced function in the new CMW. A step by step guide would be very helpful.
jamaljan said:
2 questions:
1. for custom recovery, can I use the method "CWM Touch Recovery For QMobile X900 High" mentioned here -> http://mgeeky.com/root-and-install-cwm-touch-recovery-on-qmobile-x900/
2. can you please post more details of step-3 as its a little confusing since I think there are more advanced function in the new CMW. A step by step guide would be very helpful.
Click to expand...
Click to collapse
1) That's okay
2) Install zip > chose from SD > locate to where your zip is > hit yes > follow next steps.
managed to install the 7gb partition but now when am accessing kingroot its saying that my phone is not rooted and when i try to root it, it fails... :S
---------- Post added at 10:33 PM ---------- Previous post was at 10:15 PM ----------
also, quite strangely, now I only see 6.67GB when I connect my cellfone with laptop
please, I think i've messed up things - even the bloody dialer is giving me errors...
jamaljan said:
managed to install the 7gb partition but now when am accessing kingroot its saying that my phone is not rooted and when i try to root it, it fails... :S
---------- Post added at 10:33 PM ---------- Previous post was at 10:15 PM ----------
also, quite strangely, now I only see 6.67GB when I connect my cellfone with laptop
please, I think i've messed up things - even the bloody dialer is giving me errors...
Click to expand...
Click to collapse
Wipe the data.
managed to get the system working. Installed the stock rom and everything is working fine now - but strangely the partition size has decreased to around 4gb.
All is well now
kindly help me regarding q mobile x900
i followed every instruction but after rebooting nd installing recovery.img from mobile uncle tools i takes me back to stock boot mode i mean i am unable to install cwm in my qmobile x900 its 16gb variant
anybody can do this with my mobile. i had tryied alot but just wastage of time did not successed
shortcut
Don't you guys know about any app or any shortcut? this method is too tough and risky for my phone..

(8GB) Intex Aqua Star 2(8GB) Root,Install TWRP, Flash Custom ROM(RushpopV3)

Hey guys,
I was so fed up of my phone's UI and i think u too must have got bore of it... So m providing here with full guide to change it...
ROM INFO
RUSHPOP V3
SC7731
Linux 3.10.17 kernel
No BUGS
1. Root your device
Download Kingroot from link given below and Open it and start Rooting it will fail first but try for the second time.. u will surely succeed...
2. Install TWRP
Download Rashr from playstore..
Download the recovery and place it in your memory card
Open Rashr, Grant root permissions.. Select Recovery from internal.. Select your recovey image from there
and flash
3. Flashing the Custom ROM
Boot to recovery by Switching your phone off and Press both 'volume up key' + 'Power key' and release
Power key when you see Hello android
Now u will boot to recovery, select wipe and then advance wipe
Now tick Dalvic cache, data, System and cache
Then Swipe
Now Go back and Select install and Choose Rushpop Zip there... then swipe..
Select DOLBY ATMOS fix zip file and also flash it(For working DOLBY)
Congratulations You're done...
Links:-
Rushpop:- https://drive.google.com/file/d/0B_38Cgzvz1WOaHZ4bWVXMmlYeGs
TWRP:- https://drive.google.com/file/d/0B_38Cgzvz1WOOUVuaHB6b01kdU0
Dolby fix zip :- http://bluenik.com/7400858/dolby (Thanx to Vinay)
Enjoy
Navjot Sherry said:
Hey guys,
I was so fed up of my phone's UI and i think u too must have got bore of it... So m providing here with full guide to change it...
ROM INFO
RUSHPOP V3
SC7731
Linux 3.10.17 kernel
No BUGS
1. Root your device
Download Kingroot from link given below and Open it and start Rooting it will fail first but try for the second time.. u will surely succeed...
2. Install TWRP
Download Rashr from playstore..
Download the recovery and place it in your memory card
Open Rashr, Grant root permissions.. Select Recovery from internal.. Select your recovey image from there
and flash
3. Flashing the Custom ROM
Boot to recovery by Switching your phone off and Press both 'volume up key' + 'Power key' and release
Power key when you see Hello android
Now u will boot to recovery, select wipe and then advance wipe
Now tick Dalvic cache, data, System and cache
Then Swipe
Now Go back and Select install and Choose Rushpop Zip there... then swipe..
Select DOLBY ATMOS fix zip file and also flash it(For working DOLBY)
Congratulations You're done...
Links:-
Enjoy
Click to expand...
Click to collapse
Where are the links ?
i am new to xda so they aren't allowing me to post link.. wht can i do?
sawdoctor said:
Where are the links ?
Click to expand...
Click to collapse
Sir please help me how can i add links?
Navjot Sherry said:
Sir please help me how can i add links?
Click to expand...
Click to collapse
If you send them to me I can add them to your post for you but otherwise you need to get to 10 posts to add links
Cheers
Sawdoctor
Please provide me custom rom for intex aqua star 2 hd
Will this work for aqua star 2 hd
I have ported this rom successfully for the Intex Aqua Star 2 hd but there is a bug . The navigation buttons loads after long time after the boot up and stops working after sometime. Is there any fix for that ?
Note: I am planing to fix the stock navigation buttons and not to install 3rd party apps.
Mahesh Malekar said:
Please provide me custom rom for intex aqua star 2 hd
Click to expand...
Click to collapse
Custom rom for intex aqua star 2 hd; follow this thread: https://forum.xda-developers.com/android/general/custom-rom-intex-aqua-star-2-hd-sc7731-t3684471
I installed it in my device but sd is not showing and i cant write anything on internal memory
CBPoswal said:
I installed it in my device but sd is not showing and i cant write anything on internal memory
Click to expand...
Click to collapse
What is your device name ? Is it the star 2 or the star 2 hd ...?
[email protected] said:
What is your device name ? Is it the star 2 or the star 2 hd ...?
Click to expand...
Click to collapse
Star 2
[email protected] said:
What is your device name ? Is it the star 2 or the star 2 hd ...?
Click to expand...
Click to collapse
its star 2 8gb
It must work with that model but....
There is a way for fixing this...
You need :
Pc with window xp or higher and jdk and jre installed.
Stock rom for your phone.
You must have some knowledge about decompiling , recompiling and signing an apk.
You just need to unpack stock framework-res.apk and move the following framework folder to somewhere else.(you will get framework-res.apk from ...system/framework of stock rom. Then unpack the framework-res.apk from this rom ( rushpop v3). Then go to the stock framework folder and find storage list.xml file. And replace it in the new framework folder. Then recompile the apk and sign it. Then replace this apk and flash the rom again.
If it is still not fixed then go to my thread and download the rom from there and port it by yourself.
Link: https://forum.xda-developers.com/android/development/custom-rom-intex-aqua-star-2-hd-sc7731-t3684471
---------- Post added at 02:56 PM ---------- Previous post was at 02:54 PM ----------
CBPoswal said:
its star 2 8gb
Click to expand...
Click to collapse
Ok check my previous post I forgot to mention you there.
For 16 GB
Do this work for Intex Aqua Star 2 16 GB??
not show sd card in intex aqua star 2 8gb
krishnashree said:
not show sd card in intex aqua star 2 8gb
Click to expand...
Click to collapse
I already posted how to fix it. Check above.
Don't work your idea in this massage for intex aqua star 2 8gb and not show SD Card.
---------- Post added at 05:06 AM ---------- Previous post was at 05:03 AM ----------
How to flash original ROM pls. Help sir
[email protected] said:
What is your device name ? Is it the star 2 or the star 2 hd ...?
Click to expand...
Click to collapse
I installed it in my device but sd is not showing and i cant write anything on internal memory
---------- Post added at 02:17 PM ---------- Previous post was at 02:11 PM ----------
[email protected] said:
What is your device name ? Is it the star 2 or the star 2 8 gb ...?
Click to expand...
Click to collapse
I installed it in my device but sd is not showing and i cant write anything on internal memory

Categories

Resources