Prior to actually updating my old adb.exe fastboot.exe and USB drivers I was unable to get a adb shell to the SGS5 I was always getting "offline" but my device would show up just fine.
DOWNLOAD (To download off GoogleDrive go to - File > Download)
Once you download the pack, unzip, install the USB Drivers and reboot. You will then be able to use the adb.exe provided to access your SGS5 but the first adb shell you will get prompted on the device to allow the PC you are using so please check the screen.
Related
I need some help installing amon_ra's recovery. In adb it states I don't have permission to push files. If I try to run a fastboot it states I don't have permission. How can I get the above mentioned recovery on this phone ?
timal said:
I need some help installing amon_ra's recovery. In adb it states I don't have permission to push files. If I try to run a fastboot it states I don't have permission. How can I get the above mentioned recovery on this phone ?
Click to expand...
Click to collapse
You should ask this in the thread that already exists.
If you follow every step listed, that won't happen. Do not skip any steps.
Do not skip any steps
1. Boot the device in fastboot mode, hold down the back button while powering on.
2. Connect via USB.
3. "fastboot boot recovery-RAv1.1.1H.img"
It will reboot into the custom fastboot with a black background. Then you'll be set to do these commands:
adb shell mount -a
Ignore the the errors...
adb push recovery-RAv1.1.1H.img /system/recovery.img
adb push recovery-RAv1.1.1H.img /sdcard/recovery-RAv1.1.1H.img
adb shell flash_image recovery /sdcard/recovery-RAv1.1.1H.img
adb shell reboot
I would have tried all that except the adb drivers are not working with the magic on windows vista. Device manager only shows Android 1.0
timal said:
I would have tried all that except the adb drivers are not working with the magic on windows vista.
Click to expand...
Click to collapse
they work fine, you just need to properly install them.
k4r1m said:
they work fine, you just need to properly install them.
Click to expand...
Click to collapse
Device manager only shows Android 1.0 Which I installed from the most recent sdk. Adb only will show 'waiting for device' even when I try to boot the recovery before flashing.
timal said:
Device manager only shows Android 1.0 Which I installed from the most recent sdk. Adb only will show 'waiting for device' even when I try to boot the recovery before flashing.
Click to expand...
Click to collapse
Switch to Linux ... nah just kidding... you obviously have a driver "issue", it happens to many people using Micro$oft Vi$ta...
Perform the following steps (do not skip any steps) on Vista :
1. Make sure your phone is not connected via usb
2. Download USBdeview and run it as admin (it's very important to run it as admin otherwise you will be unable to uninstall!).
3. Uninstall all drivers that mention Android in the device name or description.
4. Make sure that USB debugging is enabled in your phone (Settings - Applications - Development - USB debugging).
5. Connect your phone via usb.
6. Vista will now look for drivers, point it to the sdk drivers and make sure it uses those.
7. Check with "adb devices" to see if your phone listed.
Amon_RA said:
Switch to Linux ... nah just kidding... you obviously have a driver "issue", it happens to many people using Micro$oft Vi$ta...
Perform the following steps (do not skip any steps) on Vista :
1. Make sure your phone is not connected via usb
2. Download USBdeview and run it as admin (it's very important to run it as admin otherwise you will be unable to uninstall!).
3. Uninstall all drivers that mention Android in the device name or description.
4. Make sure that USB debugging is enabled in your phone (Settings - Applications - Development - USB debugging).
5. Connect your phone via usb.
6. Vista will now look for drivers, point it to the sdk drivers and make sure it uses those.
7. Check with "adb devices" to see if your phone listed.
Click to expand...
Click to collapse
Thank you I tried all the above. Long story short brick, no power dead . This hobbie is getting expensive.
In this guide I will show you how to use adb to move files to or from your device. Especially helpful if your device has MTP and you can't get it to work with mtpfs on GNU/Linux.
What do you need?
Computer with GNU/Linux.
Connection to the Internet.
The 32bit adb binary or the 64bit adb binary, they are added as attachment to this post. (1)
An Android phone with USB debugging on.
Steps:
Connect your phone with a USB cable to your computer. Make sure you have USB debugging on! (2) Put the adb binary in a folder where you can open a terminal. With the terminal open type:
Code:
./adb devices
Make sure it says something like this:
Code:
List of devices attached
XXXXXXXXXXXXXdevice
Now you know you properly connected your device type:
Code:
./adb pull /sdcard/
or
Code:
./adb push /sdcard/
More info on adb commands you can find here:
http://developer.android.com/tools/help/adb.html
(1): If you are using the Debian or Ubuntu distro (or another wich allows you to install *.deb files) you can install the 32- or 64 bit adb packages and use adb from every folder. Download them from the attachments. If you use this type adb instead of ./adb.
(2): Don't know how to turn on USB debugging? Go to settings, scroll down to the About phone menu item. Tap it and scroll down again to Build number and tap it many times! Then go to settings, and tap developer options and find the USB debugging option.
I hope this was helpful, but I think not, because I get no replies...
AW: [GUIDE] MTP doesn't work for you on GNU/Linux? Use adb.
http://www.webupd8.org/2012/12/how-to-mount-android-40-ubuntu-go-mtpfs.html
I usually use sftp to transfer files. No cable and shell access included.
Sent from my GT-I9100 using xda app-developers app
If you want to copy lots of files, like your music collection or movies, wireless is not fast enough. That's why I use adb, because it's very fast.
Hi guys,
My tf -101 B90 model is stuck on the logo EEE pad.
I can go to the recovery but there is no zip files.(because i was so stupid and remove files )
So ,what i to do?
Any ideas?
Tnx a lot
..i mean, how to copy rom file from my pc to tf 101.?
Tnx
Sent from my GT-N7100 using Tapatalk 2
dzontra11 said:
..i mean, how to copy rom file from my pc to tf 101.?
Tnx
Click to expand...
Click to collapse
Boot to recovery, then on your PC, download and unzip the Naked Drivers.
Plug your tablet into the PC. It should find new hardware. Go to the Device Manager (through Control Panel - System) and look for your device. It may show up as an Android or Asus ADB device, or unknown hardware. Right click on it and update driver. Pick the driver (browse to it, do not let it scan) where you put the naked drivers. This should install a good working ADB driver.
Once that is complete, you will need to get a copy of ADB. It is in the Android SDK, but if you only need ADB, you can get it from this thread: http://forum.xda-developers.com/showthread.php?t=1955627 It also has some help on getting ADB working.
Once you get ADB downloaded, put the exe in a folder named c:\adb\.
Next, open a command prompt and type cd c:\adb followed by adb devices
At this point, it should restart adb (it may error out and say the daemon failed to start, just execute the adb devices command again) and show a recovery device connected.
Now, you need the ROM you want to flash. Download this and put it in the c:\adb folder. I am going to call it ROM.zip.
From the command prompt type adb push ROM.zip /sdcard/
It will then push the file ROM.zip to your tablet.
From this point, you should be able to go to your recovery on your tablet and Install ZIP from SDCard and then it should show the file you just pushed to your /sdcard/.
Tnx dude.
I try.
Sent from my GT-N7100 using Tapatalk 2
Hello!
this guide will allow all of you to move you applications to SD!
For EG : You are not allowed to the facebook app or HTC sync to ur sd card but after you follow this tutorial you will be allow to move them
before you start of you need these things
1.Your Phone :silly:
2.the adb utility Files(if you have SDK MANAGER INSTALLED you can find these under plat-form tools folder) and if you DONT ( you can download them, link are given BELOW )
3.USB CABLE
4.Your USB DRIVERS SHOULD BE INSTALLED
----(This tweak requires Android 2.2 or later)-----
Steps:
1.Enable USB DEBUGGING first..
(Open the Settings screen, tap Applications, and select Development,USB Debugging)
2.Connect Your Phone
(connect your Android device to your computer. Windows should locate the device and install the appropriate drivers automatically. If it doesn’t, you may have to download and install the appropriate drivers from your Android device’s manufacturer. Do not mount the device after connecting it – just plug it in.) ---- (FOR HTC USERS -- SELECT HTC SYNC )
3.if you have downloaded the files from the below link , extract them and open a command window there ( BY HOLDING SHIFT AND RIGHT CLICK >> OPEN COMMAND WINDOW HERE ) . if you already have the SDK MANAGER and Android SDK Platform-tools package installed , browse to the platform tools folder and open a command window there
4.Run the adb devices command and you should see your connected Android device.
5.Type the following command to set the default install location to your SD card:
adb shell pm setInstallLocation 2
6.If you want to revert this change later and install apps to the internal storage by default, just retype the above command and replace 2 with 0
0-Default
1-Internal
2-External
7.Disconnect the Phone .. Enjoy
ADB UTILITY - http://www.mediafire.com/?hovackomfaxbso3
ENJOY :victory:
Next time please search http://forum.xda-developers.com/showthread.php?t=1924054
shortyoko said:
Next time please search http://forum.xda-developers.com/showthread.php?t=1924054
Click to expand...
Click to collapse
REAL SORRY MAN! Didnt Search MY MISTAKE
Do You Like To Flash Custom Stuffs On Your Android phone? Or Are You A Developer? But You Can't Able To Do It Because You're Facing Some Problems with Your Adb & fastboot. All Of This Problems Are Only Because Of One Thing And That is Drivers.
And If you agree With Anyone Of This Situations Then You're At The Right Place Because Today I Am Going To Tell You That How You Can Install The Adb Drivers For Your Specific Android Phone On Your Pc.
Adb drivers are necessary if you want to flash a android device through Fastboot mode or if you're a android developer. Usually Our PC installs the adb drivers automatically for the specific android device but sometimes it can't so you have to install it manually.
This will also help you to solve adb errors like Device is offline, USB debugging Authorize pop-up not showing in android And etc adb errors. Make sure that your USB debugging option in developer mode is enabled on your Android device Because without this you can't use adb.
Steps:-
*So first go http://adbdriver.com to and download the "adb driver installer (Universal)". Then extract it.
*Now connect your Android phone to your PC using USB cable. Then Open the application.
*Now you will see something like Adb interface drive and with a red Cross at left side. Make sure to refresh if driver option is not shown.
*Now Just Click On install To install your device adb drivers. Then it will Install the adb drivers for your specific android phone in just under 2 minutes.
*Then Allow The USB debugging On your Android phone. Then the adb drivers will get successfully installed.
*If still adb can't recognize your device then try to connect your phone in PTP Mode instead of MTP or Charging only modes.
*If still it doesn't work for you then Revoke USB debugging Authorizations in developer mode. So that's how you can install the adb drivers for your Android Phone.
Video Tutorial - https://goo.gl/a6QgtH