[Q] n8000 kikkat wifi proplem - Galaxy Note 10.1 Q&A, Help & Troubleshooting

[Q] n8000 kikkat wifi proplem - Galaxy Note 10.1 Q&A, Help & Troubleshooting

i tried to flash many kit kat roms .. ths original German one , gnabo rom v3 .. but every time i have no wifi connection
coming from omega rom 4.1.2
n8000 china version

from Gnabo rom,
after you flash rom, update super-su >> reboot in recovery
and then flash boodloader >> reboot

Related

Galaxy Mega 6.3 Error Flashing Stock 4.4.2 rom

Hello everyone,
İ have a Galaxy Mega 6.3(From KSA with 4.2.2) and i'm flashed 4.4.2 stock (Russia) Rom and my phone is not booting, If I try to start the phone it shows me the boot logo (name of phone) and hen it cuts off
After that i'm downloaded a 4.2.2 custom touchwiz rom and flashed it with cwm recovery and phone is booted.
but the rom have some bugs i cant use video player and air view(Maybe i cant use airview because i changed my screem, i don't know).
now i cant flash any stock rom. my phone's latest firmware(KSA) is 4.2.2 and i cant flash it because i have knox bootloader. and when falsing 4.4.2 rom the phone it shows me the boot logo (name of phone) and hen it cuts off
Any idea? how can i flash a Stock rom?
(Sorry for bad eng)

If you want to flash a stock ROM, you will need a stock recovery for your device. If you try and install a stock ROM from Samsung using a MODDED RECOVERY, it will not install.

TheArc said:
If you want to flash a stock ROM, you will need a stock recovery for your device. If you try and install a stock ROM from Samsung using a MODDED RECOVERY, it will not install.
Click to expand...
Click to collapse
i m tried to flash with odin not with recovery because İ cant find any recovery flashable stock rom

[Q] Help: Rom's after 4.4.2 on N8010?

Hi Everybody!
In first place thanks to everybody that reads this thread. Thanks for taking your time.
I upgraded my N8010 to the latest firmaware (4.4.2).
I have rooted and istalled a custom recovery (CWM 6.0.4.6) and installed Gnabo V.7 rom.
I am not particularly keen on TouchWiz, and I would like to move away from it.
Gnabo room (as it currenly is) reboots randmomly, and I also experience problems with my emaîl settings. (have to reconfigure sometimes...)
The issue is that after the new bootloader, it seems to be impossible to install any custom rom that is not TouchWiz 4.4.2 based.
I think that if sombedy could list the options that we have for roming, after the stock 4.4.2 update, this would really help.
Thanks again in advance.
José

Update rom
Here is what I did so far:
Stock N8010 on 4.1.2
Upgrade stock to 4.4.2
Root with Chainfire method (over ODIN)
Instal Philz Recovery
Install CM 11 unofficial rom that led to brick
Unbrick by flashing over odin 4.4.2 firmaware from sammobile
Reroot and CWM recovery 6.0.4.6.
Install Stockish rom 4.4.2 that led to brick --> sorted by backup with CWM recovery
Install OMNI rom --> Success!! only issue is to non boot over charging.
SO... OMNI rom seems to work.
See If I can try another one!
J

[Q] Problems with recovery

I have gt-i8160 with cm10.1 rom,but i wanth update to 4.4.4 rom by team canjica!I downloaded rom and gaaps(from cm site),and with cwm whic comes whit privios rom flash rom sucesfuly,but when i flash gaaps from cwm i risive this...error in extsd card,instalacion aborted(error 7) when i flas gaaps for cm10.1 i olso download from cm site,and that works fine!But now no i don now why,soo plz help me whot i do to solve that ishue....sory to,my bad englis

[SC-04E] How to Flash Custom Rom on SC-04E

This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!AYJjzA6S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.

Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE

Reserved
Reserved

adagiov said:
Reserved
Click to expand...
Click to collapse
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!

Gargoyles said:
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!
Click to expand...
Click to collapse
You can download the Baiduyun Application to downlad the related files. Problem might occur because it is a Chinese skydrive. And I will upload to other skydrive if Baiduyun skydirve does not work.
Please advise specific skydrive if you know.

Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo

mvstark98 said:
Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo
Click to expand...
Click to collapse
try to enter in recovery and wipe cache and data.

Thank you so much for this post.
I have managed to update to Omega V40 on my sc-04e.
And I am able to use spmode, camera and wifi.

adagiov said:
Please Leave your problem or feedback below.
Click to expand...
Click to collapse
fix link,please,thank u

verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry, I have no idea what else link is available to both you and me.

verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry for the late reply, I tried to fix the link via Mega.

Hi,i would really appreciate it if you could just spare some few minutes of your time to help me out with my phone.
So I bought this barely used Samsung Galaxy S4 (i9505) from a guy. It came with android 4.2.2 and a boatloader/Baseband of SC04E0MUAMG2 and when I boot on it shows ntt-DoCoMo before booting up (so am guessing it was locked before, it came unlocked because every SIM I have tried has worked, and also it came rooted).
The issue is I really want to upgrade to Stock Lollipop or a custom lollipop rom like Aurora or Albe95 roms, but each time I try flashing a stock rom using Odin, it says fail (usually its when it gets to ' NAND write start, Auth fail '). Since Stock refused working I decided to try Flashing a custom rom using a custom recovery, it flashed successfully but when I tried flashing the modem and boatloader for the custom Rom, Odin would show fail again, I tried if on every port on my system and even unticked F.reset and auto-reset, but the result was still fail.
So I bought mobile odin pro to try out the stock again, it did install the stock but it was buggy, camera wasn't working, Mic wasn't working, the back button wasn't working. I just had to remove it. Currently am on Imperium 12.1 custom Rom( i installed it because it didn't require flashing modem and boatloader. The only problem is camera and Mic still won't work on this rom, but when I go back to the backed-up android 4.2.2 everything works fine. So yeah, that's my predicament. I am clueless as to what to do next so please help me out. I would really like to use a stock or custom Rom.

Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.

adagiov said:
Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE
Click to expand...
Click to collapse
hefp: kernel SC-04E for miui 4.4.2 ?????

DaveHert said:
Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.
Click to expand...
Click to collapse
If you want to use stock lollipop rom, you have to flash the lastest offical rom(SC04EOMUGOI4 ).
First, you flash the stock rom, you will find everything works well except back and menu button. If you have other problem(eg. wifi does not work), you may try flash the stock rom again.
Second, fix the back and menu button problem. You can find solution here.
Then, you can enjoy the stock lollipop rom.
If you want you try other custom rom based on lollipop rom. Please follow this post.
And you have mentioned, your odin did not work via PC, sometimes it is caused by usb cable. You can try with a replaced cable, buy one or two repalced usb calbe, and usually it will help you solve the problem.
If repalced usb cable can not work, you can try with other computers.

dunglt said:
hefp: kernel SC-04E for miui 4.4.2 ?????
Click to expand...
Click to collapse
Here is the Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg

adagiov said:
This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!4JQQkT4S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.
Click to expand...
Click to collapse
Help: I need kernel miui v7 for sc-04e

vitnamese fixed rom 4.4.2 is here password is 0915710079
http://4share.vn/f/7a494f484a4b434b/affiliate/2021884
problem is i cannot download this file, if some one can please let me know

HELP
hey brothers , can you help me to use xposed in my sc-04e docomo in 5.0.1 albe rom ?
and any one use docomo sc04e can use NFC ? tq. regards

[Q] Xperia L Lollipop

Hello Guys,
Need your help. Please help me out here.
My wife has a Sony xperia L which is still running Android 4.1.2 version. Now I rooted it with Root kit and tried flashing various Lollipop Roms like Cm12,primexperia and resurrection. But wifi does not work on all these Roms
I have tried almost every solution available on Xda.
I have used multiple custom recovery, N number of kernals and have flashed Boot.img and Thunderzap 4.16 from recovery after flashing the Roms. Still not luck.
Steps followed for flashing the Rom
1.Rooted with Rootkit and updated Supersu binary
2.Installed Busy box with Flashtool
3.Flashed a kernal (Tried TZ 4.14,4.7,4.8 Extended stock kernal and some more)
4. Booted to recovery ( Tried Cwm, TWRP, Philz)
5. Wipe data and all for clean installation
6. Flashed Rom zip (Cm12, Omni 4.4, Primexperia, Resurrection)
7. Flashed Gapps (As per the Rom)
8. Flashed Supersu zip to regain root access
9. Reboot to boot into new Rom
10. Wifi is not working so flashed boot.img from Rom via flashtool
11. Flash TZ 4.16 in recovery for cm12 ROMS.
Still wifi not working not sure what is the issue. It's working fine in Stock Rom.
Now I am upgrading to 4.2.2 via Sony update software.
Masters please help me out here. I can think of 2 solutions now.
1. First update to latest Sony official update (4.2.2) and then try again.
2. If there is any firmware file for stable lollipop version (with system.img, data.img and boot.img) which can be flashed using flashtool.

ramkumar2000 said:
Hello Guys,
Need your help. Please help me out here.
My wife has a Sony xperia L which is still running Android 4.1.2 version. Now I rooted it with Root kit and tried flashing various Lollipop Roms like Cm12,primexperia and resurrection. But wifi does not work on all these Roms
I have tried almost every solution available on Xda.
I have used multiple custom recovery, N number of kernals and have flashed Boot.img and Thunderzap 4.16 from recovery after flashing the Roms. Still not luck.
Steps followed for flashing the Rom
1.Rooted with Rootkit and updated Supersu binary
2.Installed Busy box with Flashtool
3.Flashed a kernal (Tried TZ 4.14,4.7,4.8 Extended stock kernal and some more)
4. Booted to recovery ( Tried Cwm, TWRP, Philz)
5. Wipe data and all for clean installation
6. Flashed Rom zip (Cm12, Omni 4.4, Primexperia, Resurrection)
7. Flashed Gapps (As per the Rom)
8. Flashed Supersu zip to regain root access
9. Reboot to boot into new Rom
10. Wifi is not working so flashed boot.img from Rom via flashtool
11. Flash TZ 4.16 in recovery for cm12 ROMS.
Still wifi not working not sure what is the issue. It's working fine in Stock Rom.
Now I am upgrading to 4.2.2 via Sony update software.
Masters please help me out here. I can think of 2 solutions now.
1. First update to latest Sony official update (4.2.2) and then try again.
2. If there is any firmware file for stable lollipop version (with system.img, data.img and boot.img) which can be flashed using flashtool.
Click to expand...
Click to collapse
number 1. is correct the 4.1.2 software uses a really old modem that isnt compatible with LP based roms... The LATEST stockrom (...1.17 4.2.2) has the correct modem to make the wifi work
Sent from my Xperia T using XDA Free mobile app

Database Info

welcome