Hi All,
I was wondering if the below scenario is possible with any android phone.
- Plug a 3.5mm splitter into the audio jack (two female ends)
- Plug a speaker system (headphones, whatever) into one split port
- Plug a microphone into the other split port
Would the phone play audio (music, etc) through the headphones normally? If someone were to call, would the voice on the other end play through the headphones and the microphone work for me to talk to them through?
Thanks!
EDIT: Since the response has been overwhelming I went and tried the method above. Works perfectly. Thanks to... me *self high five*.
Related
When I plug in the headphones it sends the sound to the external speakers while if I disconnect the headphones I get no sound at all. If I reboot and leave the headphones in it routes the sound to the external speakers and the headphones.
Any suggestions? Software or hardware solutions?
Also is there anywhere you can order replacement part for our tablet?
Hi All,
After much searching for this simple request, how to enable Audio output to the headphone / 2.5mm audio jack and output to bluetooth speakers at the same time.
This is not a request how to get music to play on bluetooth mono headphones etc.
I am wanting to have my Nexus 5 plugged into the speakers and amp in one room, then also have my UE Boom in the next room playing audio via bluetooth.
As soon as I plug in the speakers via the jack, the bluetooth sound output is muted.
Going into Bluetooth settings and unticking music and then ticking music starts audio playing via bluetooth but stops audio via 2.5mm jack.
Any settings I need to know about? Apps or custom ROMs to do this simple feature.
Think of this as a keep playing to speakers when headphones are plugged in. Possible in Ubuntu, is it possible on Android?
Many Thanks,
Rob.
readmanr said:
Hi All,
After much searching for this simple request, how to enable Audio output to the headphone / 2.5mm audio jack and output to bluetooth speakers at the same time.
This is not a request how to get music to play on bluetooth mono headphones etc.
I am wanting to have my Nexus 5 plugged into the speakers and amp in one room, then also have my UE Boom in the next room playing audio via bluetooth.
As soon as I plug in the speakers via the jack, the bluetooth sound output is muted.
Going into Bluetooth settings and unticking music and then ticking music starts audio playing via bluetooth but stops audio via 2.5mm jack.
Any settings I need to know about? Apps or custom ROMs to do this simple feature.
Think of this as a keep playing to speakers when headphones are plugged in. Possible in Ubuntu, is it possible on Android?
Many Thanks,
Rob.
Click to expand...
Click to collapse
Just to bump the thread, as I know how fast paced the Nexus 5 forum is, and I have waited 10 days before re-asking.
Anyone with information that could help?
Many Thanks,
Rob.
Hi,
I have the following question, most (maybe all) smartphones have a 3.5mm audio jack which also allows headphones with a mic (included with some phones) since it has TRRS.
What i want is a way to connect a normal mic which is TRS (i has have a TRS->TRRS adapter) to that 3.5 audio jack in order to increase the mic volume in my phone, one main reason is when my phone is connected via bluetooth to some speakers like in the car, it will automatically decrease the mic volume.
Any suggestions?
Anyone?
This is really annoying as bluetooth lowers mic volume to almost noting...
I have discovered that mixer_paths.xml file might help in boosting the mic on bluetooth and that it also might a cyanogenmod bug...
Is anyone familiar with the values in this file and what they mean?
I need to record stereo signal on a tablet or smartphone going from a guitar multieffect. It delivers stereo output signal due to applied effects. Output on this device is a stereo jack (size doesn't count).
I know there are special cables which allow to record through mic input in a phone but those are mono.
I need something like audio interface but something not too expensive.
What would it be? Or there are other options?
am using redmi 3s
plz guys help me out plzzzzzzz:cyclops:
Hello guys i want some experienced expeRTS openion as well as tester RND USERS
my mi phone headphone jack was broken from one month non repairable becoz PCB tracks tapperd itself unknowly while cleaning.
this is my idea idk will it work or not without lossing AUDIO OUTPUT QUALITY
everyone aware in market lots off bluetooth usb dongles are there which haves female audio jack
i know bluetooth receiver are also there but as i mentioned earlier i want replacement without lossing quality of sound output over earphones i hv costly earphones $20-$35 house of Marley in ear pairs bassy and punchy like .
so here i m cuories about
are u all aware miui8 have audio source option are available inside devloper mode section
/audio over mini usb ? yes it there
so here is deals
1/
Micro USB Male to 3.5mm Audio Jack Female Adapter Cable {mostly only available on eastern countries so in my country i was coudnt find it all
and using with
second option
2/
Rrimin Wireless Bluetooth V4.1 EDR Music Audio Receiver 3.5mm A2DP Stereo Adapter (for Android, Black) ? {yes its there for purchase )
so procedure kind same for both little bit
Devloper option mode >>>usb source >>>setting as >>>>audio source <<<<while plugged in 1st micro usb to 3.5 female jack cable {restart some time need to set option properly.
then try to plug earphone pairs standard one like bass enabled . then play music or song of 320kpbs
would you please verify for me is it working or not without lossing quality of output /usb port mostly supports DAC output best one for high output
and second try might be like this using
2/Rrimin Wireless Bluetooth V4.1 EDR Music Audio Receiver 3.5mm A2DP Stereo Adapter (for Android, Black) ? {yes its there for purchase )
one additional item is required to perform the second procedure OTG cable
here is way of hop
all procedure are same as above mentioned way 1st in
2nd way just need to involved bluetooth pairing and otg involment
connect otg cable to standard bluetooth receiver who's have 3.5 female jack standard one most probably similar to which i mentioned
here is we just involving power output to bluetooth receiver ..
....a} after connecting usb bluetooth receiver to otg plugg it into phone micro usb port
b} setting usb source as audio from devloper mode mostly available into miui8 users idk abt know others ROMs
c}next step after powering up bluetooth receiver
d} pairing with inbuilt bluetooth connectivity of phone
e} after that friends you need to plug it earphones on bluetooth receiver. play some 320kps bass music using same standard set of bassy earphones like snnezier ...house of Marley or skullcandyes 20$40
tell us have u getting output of audio using both procedure i1st and 2nd { items }
if getting output of audio is it trustworthy ? as compare to original headphone PCB jack 3.5
PCB jack quality output vs usb output ....firstly i need some tester experienced groups or individual personality who will follow the above procedure basically who's hv both items .....
broken jack without lossing quality of source even its will be better due to DAC output
please response :good: