Database Info

[GUIDE]Root Qmobile Noir A2 Classic

Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)

I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
 @bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:

I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.

when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....

could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400

RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again

najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread

bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx

RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored

can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks

simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.

Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space

AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app

Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app

Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app

New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...

najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one

root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?

bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software

atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?

|TUT|SOLUTION|No Service Problem/Invalid IMEI mediatek phones|

Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.

qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
Bro nice method also add the mtk droid tools method i have posted in my root guide because this methods does not work in my phone

bilalz400 said:
Bro nice method also add the mtk droid tools method i have posted in my root guide because this methods does not work in my phone
Click to expand...
Click to collapse
ok i will add that but u can try other method which is working for some members , see my signature :good:

qmobilea2 said:
ok i will add that but u can try other method which is working for some members , see my signature :good:
Click to expand...
Click to collapse
I have fixed my imeis long ago I was just telling u to add the method as we'll
Sent from my A2_Classic using xda app-developers app

bilalz400 said:
I have fixed my imeis long ago I was just telling u to add the method as we'll
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
ohkey!! link ur thread here so i can add it here

Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/
fmnok7ke7
1. remove all sim cards from phone ,turn on
the phone in normal mode and connect it
2. open mtk tools press root button it will ask
you for some thing just click ok
3. Click replace imei and enter the imei
numbers (can be found on phone box or back
of phone)
4. Click ok reboot your phone check for
updated imei numbers
Click to expand...
Click to collapse
Credits to @rua1 for mtk droid root and tools

qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
Doesnt work. I dont have any folder after the MD folder so I created a new one still no IMEI

qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.

phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
Try using another phone's nvram.bin, which is illegal and modify the IMEI with SN Write Station or any other tools to correspond with that of your phone.

phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
1. check your baseband with mtkdroidtool if it null,you just only use flashtool format it (whole flash) and up rom again,your baseband will return,imei still null.Now you can use mtkdroidtool to re-write your imei,or use Imei & SN writer tool for hard imei.
2.if you still have baseband,just can not write imei throw mtkdroidtool -> just use Imei & SN writer,please install full driver for your mtk devices, include cdc driver

billy_cater said:
1. check your baseband with mtkdroidtool if it null,you just only use flashtool format it (whole flash) and up rom again,your baseband will return,imei still null.Now you can use mtkdroidtool to re-write your imei,or use Imei & SN writer tool for hard imei.
2.if you still have baseband,just can not write imei throw mtkdroidtool -> just use Imei & SN writer,please install full driver for your mtk devices, include cdc driver
Click to expand...
Click to collapse
I did those already non works. I Send the phone back to the manufacturer and I have to wait for a month for replacement.

It is working for me..
qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
I've tried all the other software like the IMEInSe writer, the MauiMeta 3g, MTK droid tools... none of them worked. But the method mentioned above worked for me.... now there wasn't any NVRAM error in the wireless notification.... The simcard can register to the network as well... this is flawless...
just to share... CPU version showed by the software was MT6572, but if i boot it in factory mode, it tells me its MT6589... I do not know which one is the right one, but the above methods worked for me.... Samsung S4 Korean (clone 1:1) mediatek. running JB Android 4.2.2..
Thanks...:good::good::good:

billy_cater said:
1. check your baseband with mtkdroidtool if it null,you just only use flashtool format it (whole flash) and up rom again,your baseband will return,imei still null.Now you can use mtkdroidtool to re-write your imei,or use Imei & SN writer tool for hard imei.
2.if you still have baseband,just can not write imei throw mtkdroidtool -> just use Imei & SN writer,please install full driver for your mtk devices, include cdc driver
Click to expand...
Click to collapse
Thank you for your reply sir, However the IMEI & SN Writer I tried using that but I always receive an error that "cannot write meta data something" any other ideas?

phaw16 said:
Thank you for your reply sir, However the IMEI & SN Writer I tried using that but I always receive an error that "cannot write meta data something" any other ideas?
Click to expand...
Click to collapse
please sure you already install cdc driver and have database file for your devices (mtk6577,6589.....) i use it for all my mtk devices and it alway work

billy_cater said:
please sure you already install cdc driver and have database file for your devices (mtk6577,6589.....) i use it for all my mtk devices and it alway work
Click to expand...
Click to collapse
Yes I am absolute that I installed all necessary files driver and etc there are no errors on my device manager or whatsoever. Its just the cannot boot on metadata something error.

bilalz400 said:
Credits to @rua1 for mtk droid root and tools
Click to expand...
Click to collapse
Sir, one of the links is not working.

yeahhhh nice work dude !
i follow this step and its work for me!
thank you so much. :good:

Oh my man! you just saved my day! this trick really work by the way i just restore my original IMEI in my phone that found in my warranty card! anyways thanks more power and thanks for sharing

qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
Yeah sure this method can work but if your baseband is messed up? what do you do? that is the question?

You truly are a legend mate.
Holy**** it worked for me, your method saved my ass Thank you.
It really works like charm.

WiFi NVRAM WARNING: ERR 0x10 Problem Fixed

Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
If I helped you all just say thanks by hit the :good:Thanks Button...

Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
To download Root Explorer app go here:↓
Copy and paste to your browser
www29.zippyshare.com/v/95430308/file.html
If I helped you all just say thanks by hit the Thanks Button...
Click to expand...
Click to collapse
Thanks sir I was faced that problem from many long time...
Thanks 4 such a help...
Now My NVRAM WARNING ERR 0X10 PROBLEM HAS SOLVED...
---------- Post added at 03:13 AM ---------- Previous post was at 03:08 AM ----------
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
To download Root Explorer app go here:↓
Copy and paste to your browser
www29.zippyshare.com/v/95430308/file.html
If I helped you all just say thanks by hit the Thanks Button...
Click to expand...
Click to collapse
Thanks sir I was faced that problem from many long time...
Thanks 4 such a help...
Now My NVRAM WARNING ERR 0X10 PROBLEM HAS SOLVED...

thank you, thank you, thank you!!!
works ok!!

Thanks
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
To download Root Explorer app go here:↓
Copy and paste to your browser
www29.zippyshare.com/v/95430308/file.html
If I helped you all just say thanks by hit the Thanks Button...
Click to expand...
Click to collapse
WORKED FOR ME ON MY CANVAS 2.2. A114 THANKS FOR THE HELP....
:good::good::good::good::good:

Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
To download Root Explorer app go here:↓
Copy and paste to your browser
www29.zippyshare.com/v/95430308/file.html
If I helped you all just say thanks by hit the Thanks Button...
Click to expand...
Click to collapse
Can i use this file with other MTK phones?

imranz said:
Can i use this file with other MTK phones?
Click to expand...
Click to collapse
Yes obviously You can do it with all mtk phones... Good Luck..
If you satisfied with my answer, all U have to do - Press the :good:THANKS Button..
:good: -----<< THANK YOU >>----- :good:

It's working on HTM / LANDVO L900

Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
If I helped you all just say thanks by hit the :good:Thanks Button...
Click to expand...
Click to collapse
Thanks, but this only fixed the issue temporarily. Each time I restart my phone the error comes back and I have to do these steps all over again. Sigh.

mast idea hay bhai worked

Does not work for me, MT 6589 chip.
Lenovo P780ROW S221 rom

Worked on Doogee DG800 Valencia.

Worked for A116
Thanks a ton. i have been googling and scratching my head all around but you are the saviour. My WIFI is also working perfect now.

topatil said:
Thanks a ton. i have been googling and scratching my head all around but you are the saviour. My WIFI is also working perfect now.
Click to expand...
Click to collapse
Your Welcome topatil...

Asus memo pad hd 7
Worked a treat on my Asus memo pad after being returned by Asus with the error present. Thank you. Much appreciated mate

Not working on my canvas 2 plus A110q
Not working on my canvas 2 plus A110q.Still showing NVRAM error

Džůny said:
Worked on Doogee DG800 Valencia.
Click to expand...
Click to collapse
Unfortunately, only temporarily.
First, I have to admit that I did not have any luck with Total Commander (as described elsewhere in the net).
The Root Explorer from the first posting of this thread sometimes simply does not show the contents of the SD card. It then has to be restarted. Although I made sure that everything was mounted r/w, copying the fixed files to /data/nvram/APCFG/APRDEB failed at most attempts, I got the message that moving the files failed.
However, I managed it once to replace the WIFI file by a fixed one. But the NVRAM error then only changed from 0x10 to 0x01 - seems like bad luck here.
Kind regards,
DAC324

Worked on lenovo a369i. Tq
Sent from my Lenovo A369i using XDA Free mobile app

Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
Click to expand...
Click to collapse
Here is some amending information for phones like the Doogee Valencia DG800 which are a bit peculiar when rooted.
On these phones, the root user does not see the SD card because it is not mounted for root.
Thus, you cannot copy the repaired files back to the /data/nvram/APCFG/APRDEB as easily as described in this guide.
So please find below a modified guide for fixing the Doogee Valencia DG800 and similar phones:
Before doing anything else, check your phone's MAC address (settings, about phone, near the bottom). If it starts with zeroes (00:xx:xx...) just proceed with the steps below. If not, you can enter your own MAC address into the fixed WIFI file.
To accomplish this, you will need a hex editor. Unpack the fixed files from the attachment and open WIFI in the hex editor. The bytes to be changed are in the first row, starting from column 04. Here, you can enter your MAC address, overwriting the one included in the file.
Note (again): This only works if your MAC address does not start with 00:xx:...
Now let's proceed with the fix. To be sure, switch off WLAN on the phone, then do the following:
1. Unpack and transfer the fixed/edited WIFI files to your phone's SD card (preferably, into the root dir of the card)
2. Get ADB files from the attachment and unzip them into an empty folder on your PC.
3. Install (if not done already for rooting) the Doogee USB drivers (attached here because sometimes hard to find)
4. Connect the phone to the PC using USB.
5. Check if ADB can find your phone, type
Code:
adb devices
6. If no, check if the correct drivers are installed and on the phone, USB debug mode is switched on.
7. Now, enter the ADB shell (we can do everything from there, no additional apps needed) by typing
Code:
adb shell
8. In the shell, issue the following commands:
Code:
su
mount -t vfat /dev/block/vold/179:97 /mnt/media_rw/sdcard0
cd /data/nvram/APCFG/APRDEB
cp /mnt/media_rw/sdcard0/WIFI .
cp /mnt/media_rw/sdcard0/WIFI_CUSTOM .
exit
exit
UPDATE: If you installed the latest official Doogee firmware which is based on Android 5.0 (file name: 15-05-14 z869h-oq-k44-dg800-qhd-wg850p2100-emmc-64g8g-Android-5.0 外文归档（道格）.rar) the SD card is already mounted properly so you will have to issue the following commands:
Code:
su
cd /data/nvram/APCFG/APRDEB
cp /mnt/sdcard/WIFI .
cp /mnt/sdcard/WIFI_CUSTOM .
exit
exit
8. Disconnect and reboot the phone and switch WLAN back on. The error now should have been gone. If not (and you edited WIFI), you made an error or your MAC address is invalid (like the ones starting with 00:xx:...). Use the fixed WIFI file without editing then.
Good luck!
DAC324

Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
Click to expand...
Click to collapse
Just wanted to say thank you, your fix worked perfectly on my mtk6592 Chinese Clone S5

Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
If I helped you all just say thanks by hit the :good:Thanks Button...
Click to expand...
Click to collapse
I have tried this method on my lenovo S939 and its work thanks fellas :good::good:

[Q&A] Micromax Unite 2 Root and Custom Recovery

Q&A for Micromax Unite 2 Root and Custom Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Micromax Unite 2 lock screen app misbehaving after root
Sudeep Duhoon said:
Don't mix this guide with some other as i will not help in that case.
First of all, use read back to get rom dump (backup) as there is no stock rom available on net.
Go here and follow the guide.
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download and copy/move KingUser to your memory card. (Fix provided by sagarwep:op)
3. Download any kitkat recovery from here and place it in pc.
4. Open SP Flash tools and load this MT6582_Android_scatter.txt in it. (alternative download link of sp flash tools)
5. Click on 'recovery' in sp flash tools and select the downloaded Recovery .
6. Click Download in sp flash tools, remove the battery from phone and connect it to pc.
A green circle/download ok will confirm flashing.
7. Insert battery and press volume up+down+power on, then press volume up to select recovery.
Note: in ctr recovery you can swipe right to go forward and swipe back to go backward, use it to navigate, save volume buttons.
8. Tap on install from sd card and swipe right on screen to go forward, select Unite_2_4.4.2_Proper root......zip and say yes to flash.
9. Reboot, Done.
In case any one wants working MTK droid tools, here or here
Please subscribe, rate and like this thread.
Any problem, ask in fb group or pm me on facebook.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I've rooted my Micromax Unite 2 as per your root guide line, just after finishing root my lock screen app started misbehaving. after I restart my phone it first shows me the launcher and then after approx 20-30 seconds it shows lock screen. also I see an error message every time it boots which says that the process "system" is not responding -> kill or wait, choosing kill restores the normal phone function until next restart. restoring my backup of stock rom fixes the problem. could you please guide me how to solve this problem?

Not working
I did every single step correctly but idk why its showing no root access on my unite2 ...
then i tried rooting through mtk droid tools n im getting this error
ERROR:file abdb not install
the file isn't chosen
PLEASEEE HELP ... what to do

recovery mode problem
hey,
i have downgraded my micromax a106 to jeallybean of myphone aqua rio lite. now my recovery mode option is not working. on choosing recovery mode phone doesn't entering to recovery mode and it is booting to desktop. my phone is rooted. please help how to fix this

mmx unite 2 sd card mount/detect issue
Have recently bought micromax unite A106 june 2014 through flipkart. unable to detect/ mount external sd card .
tried with different sd cards which are working well in other phones.
Kindly help !!

Rooting Micromax unite 2- Problems
Hi Sudeep Duhoon,
I tried to root the Micromax Unite 2 using the software you have listed and followed the process to the T using the CTR 2..2 as recovery of choice.
1 When i try to activate the Root Explorer option on it gives me message"Sorry Test Failed, This feature can not run on your device"
2 When I connectbot i still get the $ sign in root
Please help.
Sadanand

Micromax Unite 2 Root and Custom Recover
Hi Sudeep ,
I had use the Tools and Rom given you to Root my Micromax Unite 2 . I had followed all the processes as shown.
Later on today When I tried to install Titanium It asked for SU Permission and It failed to get access and further message is its not rooted.
please help......

Use King Root ... 100 % success
Sent from my Micromax A106 using xda app-developers app

micromax unite 2 root
sir im unable to root my micromax unite 2. sp flash tools shows nothing n phone shows nothing but pc recognizes my device. developer is on plz help me

I want to upgrade to kit kat from jelly bean (mmx a106), but want to have flip to mute functionality of jelly bean
Can anyone guide me step by step for above 2 questions please
Sent from my Micromax Unite 2 using XDA Free mobile app

No command screen
I am using micromax unite 2
when i go to recovery mode i can see a no command screen... whenever i do something. any solution?

Recover Not Working Micromax Unite 2 After Flashing Stock Rom Of Android One?????
I have flashed rom of Micromax Canvas A1 on my Micromax Unite 2 By useing SP Flash tools. I thought it will work since both has almosh same specification (MTK 6582). And I will get new version of android on my Micromax Unite 2. Now my phone is not working. It is not even detected by SP flash tools. Otherwise i would have flashed the stock rom of my phone on it to make it work. Please help me with some guite by which i can recover my device.

Rooting Issue
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?

HELP PLZ
pmt changed for the rom it must be downloaded
what to do now plz help me guys

tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Presuming you are referring to error in sp flash tool while flashing :
1)If you are flashing same Rom (jb to jb or kk to kk) then that means the partitions are changed, if you have changed ebrs then restore them first, then the error will go
2)if you are flashing jb to kk or kk to jb then use format all & download option.
---------- Post added at 12:12 PM ---------- Previous post was at 11:42 AM ----------
Sumit Mandal said:
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?
Click to expand...
Click to collapse
Use any custom recovery and flash koushik datta's superuser zip for rooting (he is the founder of cwm) to root your a106

tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Thnks sir now my device is successfully rooted

Root Micromax Canvas 4
In the 5th step you said :
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
But I have to backup my Micromax Canvas 4 [ A210 ]. What numbers should I enter there ?
Please tell me asap. Or any other link or post about Canvas 4 [ A210 ]
Thanks in advance.

this error is coming bro
PMT changed for the ROM; it must be downloaded

Rooting Micromax Unite 2
Hello Guys I followed Sudeep Duhoon and was successfull in installing TWRP custom Recovery and flashing superuser [it installed as system app and I wonder how to remove it now!!!], but still my phone doesn't seem rooted as Root Checker app says "This device doesnt have proper root access". I want to root this anyway please help.

No emmc backup
Hello. I have a wiko bloom (same phone as micromax unite 2 and myphonerio lite), I have flashed TWRP on kitkat, I couldn´t use the scatter file provided in the post so I used the one that I had from my phone. Once I flashed the recovery, I tried to backup my phone, but I have an error saying Error: couldn´t mount /emmc
I have looked for that folder with root explorer but there is no /eemc folder but some files intead (like [email protected], [email protected])
Before trying anything by myself I would like to know it there is any way to fix that. I would like to install roms and that things but I´m not sure they would work if the architecture of the software is not the same :/
TThank you in advance

[Guide] [How to] Repair IMEI Invalid | NV RAM Warning | Micromax Unite 2

REQUIREMENTS
Rooted Device
Custom Recovery
(CTR, CWM Recommended)
Click to expand...
Click to collapse
One week after i brought my phone, I accidently formatted my device using sp flash tools and lost the IMEI/NVRAM. It has been a real pain for me to repair it because i was new to an mtk device. Finally figured out how to repair by doing many search. So I made this thread to share the working methods to help those people who are suffering from invalid IMEI
So let's start.
Always remember "Prevention is better than cure". If you are planning to flash a custom rom, First of all Backup your IMEI. Don't Trust that a custom ROM flash will not delete your IMEI number. because odds are it will. It's important to store your backup to external SD because some ROM flashing techniques will erase your internal SD. so the best way to keep your IMEI number is to take my advise and make a backup.
Some Video tutorials will be added soon
DISCLAIMER: Do not do try any of these methods unless your IMEI has been lost! Doing so may permanently corrupt your imei partition.​
IMEI Backup & Restore Methods:
1. Mobile Uncle Tools:
1. Open the App,
2. Select IMEI BACKUP RESTORE (MTK)
3. Choose BACK UP TO SDCARD (MTK)
4. Reboot
>> (to restore, choose restore from sd card)
2. MTK Droid Tools [PC Required]:
1. Switch on the phone and connect it to pc.
2. Go to settings->about phone.
3. Tap build number for 7 times.
4. Go back and enter developers options, and check usb debugging on.
5. Start MTK Driod Tools and click root. grant root permission in phone.
6. Click IMEI/NVRAM and click backup or restore as required.
>> (to restore, choose the backup file from nvram backup folder)
Temporary IMEI Restore (without Backup):
(These are Temporary Methods, so you need to do this every time you upgrade Firmware, install a new rom, or doing a factory reset.)
1. Chamelephon
1. Install Chamelephon.apk
2. Open App
3. Type both IMEI Numbers
4. Click "Apply new IMEIs"
5. Reboot
Video Tutorial
2. MTK Droid Tools [PC, ADB Drivers Required]
1. Enable USB debugging
2. Open MTK Droid tools in PC
3. Allow USB debugging in phone if asked
4. Click ROOT button in MTK droid tools
5. Click Yes and Grant/Authorize root permission in phone
6. Click IMEI/NVRAM option in MTK droid tools
7. Type both IMEI numbers
8. Select "Replace IMEI"
9. Click OK
10. Reboot!
Video Tutorial
2. NVRAM Wifi Error
1. Download "NVRAM Wifi Fix.zip"
2. Enter Recovery
3. Install the zip
4. Reboot
Permanent IMEI Restore(without Backup):
1. Maui META 3G Tool
1. Install "Maui META 3G Tool" on your PC
2. Open it.
3. Click "Options ↦ Connect Smart phone into META mode"
4. Click on Reconnect button
5. Switch off your phone
6. Connect via USB Cable
7. Change "Get Version" to "IMEI Download"
8. Click "Change NVRAM Database file"
9. Download & extract "NV Ram Database Files.rar"
10. Select "BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V5_1_wg_n"
11. Type both IMEI numbers
12. Click "Download to flash"
13. Click "Upload from flash"
14. Close the IMEI Download Tab
15. Disconnect
16. Switch on the phone.
2. IMEI&SN Writer
Didn't tried this method. Hope this too will work!
1. Flashing NVRAM.bin (Recommended for Lolipop Roms )
1. Install SP flash tool
2. Load Scatter file
4. Now press download
5. Connect your phone without battery
6. Insert battery & turn on your device when you see the green tick.
new blog under construction:
for broken links, and other video guides, click here
DOWNLOADS
MOD EDIT - ALL THE LINKS ARE REMOVED SINCE XDA RULES DO NOT PERMIT PAY PER CLICK.
I really worked hard to make this thread. Hit THANKS button if you found this useful
You can add your experience in fixing imei below on this thread. It may help many others! Always remember, Sharing is caring! Thank You.

Reserved
Reserved
USB VCOM Driver installing guide: http://forum.xda-developers.com/showthread.php?t=2206421

NVRAM Error and Serial Number fix with SN WRITE STATION TOOL on unite 2
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.

cdc drivers....
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz

No Sim card detect in my UNITE 2
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.

dark_x said:
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
Click to expand...
Click to collapse
I didnt have it right now. Don't know that where did i find those drivers. Search it in google. I will try to figure it out as i got some free time.

viru_192 said:
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
Click to expand...
Click to collapse
What about your imei number???

I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x

rahulsingla said:
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
Click to expand...
Click to collapse
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?

answer
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Yes i select same file for twice name of file is given above in my post and i never try to write other things like bt address, imei same time but i want to say don't try to write bt address because it will show error every time when you try to write and i also want to say that imei number can be written with this tool but select only imei don't other things like sn number, wifi mac address.......etc. try one thing only at same time. means when you want to write imei then select only imei but you can choose sn and wifi mac address at same time it can be flashed successfully......
---------- Post added at 04:48 AM ---------- Previous post was at 04:41 AM ----------
dark_x said:
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
find drivers in this link ..... thanks to kumar abhishek for his guide for driver and installation procedure.......

nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Hey i have the same problem. Did you find any solution?

girrafe said:
Hey i have the same problem. Did you find any solution?
Click to expand...
Click to collapse
I got this issue while running on lolipop firmware, trying to write imei with my PC running Windows XP, but for kitkat, it works.. These applications didn't worked for me in Windows 8.1 and 10

Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.

johnygeorge said:
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
Click to expand...
Click to collapse
try the permanent imei repair method mentioned in the first post.

ajiththiruvatta said:
try the permanent imei repair method mentioned in the first post.
Click to expand...
Click to collapse
Bro thanks for helping me. I hv one last question i hv nv ram.bin file of my stock rom ok but when i load scatter file in sp flash tool there is no option to flash nvram.bin if u try figure it out i will appreciate.