Related
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
callum123457 said:
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
Click to expand...
Click to collapse
when you connect your phone in flashmode green light should stay on (press & hold vol down then plug usb in)
it should show
"device connected in flashmode"
IF you want fastboot mode
when you connect your phone in fastboot mode blue light should stay on (press & hold vol up then plug usb in)
NOTE-it should actually do bootloops....not sure why red light
callum123457 said:
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
Click to expand...
Click to collapse
Sometimes flash tool, while flashing tells me to turn on usb debugging (although its already on). So what do I do? Wait. After ten minutes(approx), device disconnects automatically and then flashtool requests me to connect in flash mode. So I disconect my usb cable and connect it again in flash mode and voila! flash begins. Worked for me, hope it works for u too..
Sent from my Xperia E dual using XDA Premium 4 mobile app
sohailferdous said:
Sometimes flash tool, while flashing tells me to turn on usb debugging (although its already on). So what do I do? Wait. After ten minutes(approx), device disconnects automatically and then flashtool requests me to connect in flash mode. So I disconect my usb cable and connect it again in flash mode and voila! flash begins. Worked for me, hope it works for u too..
Sent from my Xperia E dual using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes thats a common mistake
on flashmode connect phone in flashmode only when asked (or like you said ...you will have to do twice)
on fastboot mode your phone has to be connected in fastboot before selecting the fastboot mode
I'm having very similar trouble, i flashed FXP CM10 a little while ago until the phone stopped receiving a signal (which has happened a few times using CM10), unfortunately the battery died before i got home to flash it again. 3 days and 7 hours later and the battery still hasn't charged, i've managed to boot into android very quickly while it's connected to a wall charger but i get nothing at all if i try and connect in flashmode or fastboot.
Is the battery dead? Is there something i'm probably missing? I figured this might go to someway with hoping the OP.
[Edit: Good news! I've plugged into USB and i can get to the battery bar with the power symbol, maybe i can get to flashmode after all!]
[Edit 2:] Noticing the phone had just enough power to get to the battery/power symbol screen, held down the volume button for about a minute till it went through that cycle and managed to get it into flashmode, installed stock and plugged it into the wall. 5 mins later i hit the power button and it's working again! Hooray!
GeoH85 said:
I'm having very similar trouble, i flashed FXP CM10 a little while ago until the phone stopped receiving a signal (which has happened a few times using CM10), unfortunately the battery died before i got home to flash it again. 3 days and 7 hours later and the battery still hasn't charged, i've managed to boot into android very quickly while it's connected to a wall charger but i get nothing at all if i try and connect in flashmode or fastboot.
Is the battery dead? Is there something i'm probably missing? I figured this might go to someway with hoping the OP.
[Edit: Good news! I've plugged into USB and i can get to the battery bar with the power symbol, maybe i can get to flashmode after all!]
[Edit 2:] Noticing the phone had just enough power to get to the battery/power symbol screen, held down the volume button for about a minute till it went through that cycle and managed to get it into flashmode, installed stock and plugged it into the wall. 5 mins later i hit the power button and it's working again! Hooray!
Click to expand...
Click to collapse
use jim34 cm10 with hsr0 kernel....FXP IS CRAP for daily use
don't connect your phone to the pc until flashtool asks you to. I get that thing sometimes when I reflash a rom or kernel
Sent from my ST21i using Tapatalk
Hello.
I'm in a bit of a pickle. I installed slimbean on my friends Xperia J and it booted properly and everything. The only problem I had was that the IMEI was blank and the phone could not get the network established. Now I wish that was still the problem. It looks like the phone is totally bricked. I left it on over night and it was fully charged, but in the morning it was turned off. I tried turning it on, taking out the battery, but couldn't get it to turn on. I tried getting into fastboot mode, but to no avail.
When I press the fastboot button (volume down) and connect it, the windows doesn't recognize it and failes to install the drivers. After that, when I plug it in, I can hear the failed usb connect sound. And that is about it. Please guys, work your magic. Thanks.
cikamatko said:
Hello.
I'm in a bit of a pickle. I installed slimbean on my friends Xperia J and it booted properly and everything. The only problem I had was that the IMEI was blank and the phone could not get the network established. Now I wish that was still the problem. It looks like the phone is totally bricked. I left it on over night and it was fully charged, but in the morning it was turned off. I tried turning it on, taking out the battery, but couldn't get it to turn on. I tried getting into fastboot mode, but to no avail.
When I press the fastboot button (volume down) and connect it, the windows doesn't recognize it and failes to install the drivers. After that, when I plug it in, I can hear the failed usb connect sound. And that is about it. Please guys, work your magic. Thanks.
Click to expand...
Click to collapse
Use flashtool and flash Stock ICS, To put your device in flashmode you hold the Volume + and plug the USB in, The LED Light should light up green, The reason your IMEI was gone and you have no network was because you must've flashed straight from Jellybean? The way to solve this is by flashing from ICS to your desired rom, Goodluck!
Hussain_Salam said:
Use flashtool and flash Stock ICS, To put your device in flashmode you hold the Volume + and plug the USB in, The LED Light should light up green, The reason your IMEI was gone and you have no network was because you must've flashed straight from Jellybean? The way to solve this is by flashing from ICS to your desired rom, Goodluck!
Click to expand...
Click to collapse
Thanks for your response, but the biggest problem is that I can't get into flashmode. Windows just makes a failed connect usb sound and that's it. And the device is listed in the device manager as unknown device.
But, really, thanks for the response.
cikamatko said:
Thanks for your response, but the biggest problem is that I can't get into flashmode. Windows just makes a failed connect usb sound and that's it. And the device is listed in the device manager as unknown device.
But, really, thanks for the response.
Click to expand...
Click to collapse
Windows won't detect anything if you get into flashmode, try again, plug the usb and wait 0.001s and press "Volume +"button
[0.001 s means that do not press button and plug usb at the same time,but need fast action]
lhkakex said:
Windows won't detect anything if you get into flashmode, try again, plug the usb and wait 0.001s and press "Volume +"button
[0.001 s means that do not press button and plug usb at the same time,but need fast action]
Click to expand...
Click to collapse
No luck, just keep hearing the usb failed connect sound and that's it.
cikamatko said:
No luck, just keep hearing the usb failed connect sound and that's it.
Click to expand...
Click to collapse
I've been through this before, another method is installing Sony PC Companion have it opened up, and attempt to put your device in flash mode
Hussain_Salam said:
I've been through this before, another method is installing Sony PC Companion have it opened up, and attempt to put your device in flash mode
Click to expand...
Click to collapse
Nope
I guess that's it.
cikamatko said:
Nope
I guess that's it.
Click to expand...
Click to collapse
You said your battery was completely flat right, so what's happened is your phone doesn't have enough power to do anything, What you need to do is leave the phone on charge (Best to do it overnight) One you've done this Take your battery out for 5 minutes, After place your battery back in and use flash tool and Flash Stock ICS (If you want to flash to slimbean again) if not goa head and flash Stock JB, Your device should run normally
Hi,
I don't know what can I do now, perhaps noting. I accidentialy flashed wrong bootloader (from other xperia, not Miro). Now phone seems to be completly bricked, I can't turn it on and my PC does not see any new device after connecting phone to usb. I also tried to remove and insert battery, after this when trying to power on, there is short vibration and nothing more.
Do you have any ideas? Or I simply should to use it as brick, not as phone or put it to my toilet and wash? Thanks.
Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303
Don't worry, Your phone is not hard bricked. As you mentioned that on starting , phone is vibrating that means there are chances to recover your phone.
1.First go through this guide :Using Flashtool for Xperia devices
2.Download your current stock firmware . Visit this: Miro all official firmwares
3.Install proper drivers as mentioned in the above 1.flashtool guide.
4.Flash the firmware for your phone , according to the above 1. Flastool guide.
5.Wait untill flashing completes. start your device when you are told to do so.
Good luck :good:
Dzepar said:
Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303
Click to expand...
Click to collapse
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.
giaur said:
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.
Click to expand...
Click to collapse
You should see green light. Try this :
Pull out battery, hold power button for 10 seconds without battery. Reinstall battery, hold volume button - and connect to usb. Then follow steps that prateek.invasion gave you.
The point is you can flash ftf and restore your phone.
Good luck.
Sent from Xperia M2 D2303
Thanks, I will try. Batteery is not charging, so I need to do this quick, it was not fully charged.
Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?
giaur said:
Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?
Click to expand...
Click to collapse
I had the same issue with my xperia e after I unlocked the bootloader and installed CWM, the phone just rebooted itself at boot up. If you have installed CWM I suggest you to install a custom rom and a new kernel. That worked for me . Or ofc, if you have warranty you can send it to them. They won't be able to tell if you installed another rom since the pc doesn't recognize the phone.
I don't have cwm... trying to connect to computer with volume down pressed. After this led starts flashing red and computer can't see any device connected
Seems there is no any recovery or I can't put it to recovery mode.
Hi. My device is hardbricked. I see no lights while charging. Flashtool doesn't see my device.how can i fix this?
Edit:Easily fixed it.I plugged my device into the computer.I entered platform-tools and flashed boot.img.I saw "waiting for device" And i pressed volume up and power buttons. Suddenly boot flashed and i recovered my phone
You are very unlikely to have hard bricked it unless you have unlocked the boot and flashed something wrong.
If you did this please help us help you by telling us what you did just before this happened.
Also, just leave the phone on charge (Wall charger) for 24 hours and then see what happens.
In the mean time read this
solution for no LEDs no response no fastboot devices.
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Fastboot remote command not allowed SOLVED
stevenmanzano said:
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Click to expand...
Click to collapse
Hello
I had the same problem with REMOTE COMMAND NOT ALLOWED till i managed to solve it.
1st thing you need to clean that ANDROID folder you made on C: drive.Install all from the begining including flashtool.Boot windows to install unsigned drivers.In the flash tool folder youll find the driver downloader,just enable usb debugging and choose Mass Storage not MTP .; You have 4 options usb debug on/off and usb connectivity MTP or Mas Storage ;with every version selected connect and disconnect from pc with flashtool running.
When you use Fastboot start the flashtool and close it if it cant kill ADB (that assuming you succeeded in installing drivers).
Good Luck
Please tell me D6603 testpoint
bgbgtbvan said:
Please tell me D6603 testpoint
Click to expand...
Click to collapse
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
john abruzzi said:
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
Click to expand...
Click to collapse
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
mihir762000 said:
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
Click to expand...
Click to collapse
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Omario-242 said:
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Click to expand...
Click to collapse
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
mihir762000 said:
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
Click to expand...
Click to collapse
The green led indicates flash mode so the problem is probably on your PC not detecting it properly. Does it show up in the system manager of windows if you plug it in at all? (Like a new device/android with a yellow triangle)
You could also try to fastboot a recovery and flashing a ROM from there. Not sure if it works but that's what I would try.
i m not even able to fastboot a recovery ...tried twrp and cwm both of them...
Me too
in my phone after charging 24h, only the red LED blinks, this is not normal any suggestions?
--------------edit
ok another week and still nothing
maybe I'll describe the problem:
I wanted to upload clean soft 5.1.1 and flash it
after the phone turned off it's start in recovery i used zip with SU and the phone turned off with no respond i try too reset (vol- + vol+ + power) but no reaction
there were no three vib
so I found that you have to reset the button under the sd flip
after this treatment you already know the charging of 3 days and only the red LED blinks
So any suggestions??
|
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
ibo90p said:
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
Click to expand...
Click to collapse
Like you I have a Xperia Z3 mines the 6633 variant.. Signs were showing it to be hard bricked, for example:
No led charge indication!
No power led!
No fastboot leds!
No USB detection sound when plugging into windows.
Literally a Z3 that was essentially a glass brick I bought off ebay for £6.50 GBP for spares/repair.
Since I had a bricked device, I had nothing to loose.
I applied heat to the rear glass with a hair drier & removed the panel, I removed the battery ribbon cable & plugged in via USB only to find the phone would show LEDs so put it on charge.
The Z3 now goes into flash mode, so then re-flashed a stock ROM from flashtool. I did a apps log & user data wipe, cust reset & fota reset.
To date I have no idea why the phone would not take a charge before or even detect via USB, though Id say give this method a go, you may be surprised!!
Good luck
I flashed a wrong recovery img... now the Xperia c2305 is not booting. It is only showing red light when i connect to computer.
I tried the PC companion method and wmshua flash tool. but it doesn't detect my phone.
How to repair this ??
How can i repair this using testpoint method or Meta mode method??
so your pc doesn't detect your phone?
when you plug your usb + press volume down at the same time green light should appear, what happen in your case?
same problem
tataboga said:
so your pc doesn't detect your phone?
when you plug your usb + press volume down at the same time green light should appear, what happen in your case?
Click to expand...
Click to collapse
I am also facing same problem and yes when I press volume down while plugging in, the orange light blinks once in 10sec but the device doesn't get recognized or nothing is happening on the device side.
this is how I solved it
subhashvnr said:
I am also facing same problem and yes when I press volume down while plugging in, the orange light blinks once in 10sec but the device doesn't get recognized or nothing is happening on the device side.
Click to expand...
Click to collapse
I flashed a wrong recovery.img and that's it the phone wouldn't boot. If I connect to pc companion it just shows blinking orange light but is not detected. This is what I have found out
1. the phone is struck in a bootloop which drains all the battery -- Press the hard reset button at the back of the phone to break from this loop
2. Put the phone on charge for a while ( now it should at least show a steady orange led indicative of charging) as this is needed for software repair
3. Use software repair in sony pc companion for restoring stock android os. -- if the phone is not detected when you plug in while holding volume down key, then release the key once and again press and hold it while the usb is still connected (this worked for me)
4. once the phone is detected and repairing has started the process may fail in between and pc companion may say repair failed!(don't loose hope) -- disconnect from pc, press hard reset button again and repeat steps 3 & 4. ( the repairing process will resume and will be completed slowly)
Note: If your phone is struck at sony logo or is not fully switched off press and hold the power+volume up key together to first switch if off and then connect to pc companion
subhashvnr said:
I flashed a wrong recovery.img and that's it the phone wouldn't boot. If I connect to pc companion it just shows blinking orange light but is not detected. This is what I have found out
1. the phone is struck in a bootloop which drains all the battery -- Press the hard reset button at the back of the phone to break from this loop
2. Put the phone on charge for a while ( now it should at least show a steady orange led indicative of charging) as this is needed for software repair
3. Use software repair in sony pc companion for restoring stock android os. -- if the phone is not detected when you plug in while holding volume down key, then release the key once and again press and hold it while the usb is still connected (this worked for me)
4. once the phone is detected and repairing has started the process may fail in between and pc companion may say repair failed!(don't loose hope) -- disconnect from pc, press hard reset button again and repeat steps 3 & 4. ( the repairing process will resume and will be completed slowly)
Note: If your phone is struck at sony logo or is not fully switched off press and hold the power+volume up key together to first switch if off and then connect to pc companion
Click to expand...
Click to collapse
Where is the hard reset button. I haven't been able to find it.
LawrenceMyers666 said:
Where is the hard reset button. I haven't been able to find it.
Click to expand...
Click to collapse
It is pin hole above the battery beside the sim slots
Hi,My sony xperia C phone is not booting up. I think it is stucked at bootloop. Tried to repair it using Xperia Companion but it is showing that the software repair is no longer supported for this phone. Can someone help me on this?
Plz help
Any body please help i have xperia c2305 im not able to flash any rom in it it says i have to enable usb debugging but currently my phne is not turning on it is only showing sony logo is there is any way to flash rom in it.?