Related
well, when you start with your new 9001 you will get confused by adm, sdk and weird things like that. Take your time - you don't need it for the beginning - just follow these steps:
1) root (easy) http://forum.xda-developers.com/showthread.php?t=1253707
thanks to KeksKlip - (to get into recovery you need to shut off, press Volume up and Power until Samsung appears, then wait for the box and press menu)
2) recovery (not so easy) - you will be happy to have a backup, so this is really wise to install it. The recovery from RomManager does not work - you have to install this modded recovery.
http://forum.xda-developers.com/showthread.php?t=1331164 [Release]FeaMod Recovery 1.4 - based on CWM Recovery v. 5.5.0.4. thanks to manveru0
[EDIT: you can now flash FeaMod v1.4 via Odin: try this link http://dl.dropbox.com/u/63588663/FeaRecoveryV1.4.tar.md5 thanks to nail16]
You have to flash only FeaMod v1.2 (you need not more than that) therefore you need odin and AriesVE - links at the bottom of this thread. (you need them also for the next step)
To get your Phone into downloading mode you have to shut it down and press power volume down and home at the same time. After 5 seconds you see a nice downloading picture.
After flashing sucessfully you can make your fist backup (chose backup to internal card -it is faster)
3) new ROM (easy when you succeed with the last step) http://forum.xda-developers.com/showthread.php?t=1533029 [ROM] I9001XXKQ7 [Android 2.3.6] thanks to mozgoder
Same procedure as before. You have to flash it by downloading mode.
Now you have a odexed KQ7 ROM (you need something like that for step 5) -and a nice lockscreen!
3a) root it (point 1 again) and install busybox installer from the market (I am not sure, if it is necessary, but you will need it later)
4) deodex your ROM (easy) - this step is required for installing additional themes etc. you can install it by recovery - that means, you have to copy the file to (internal) sdcard and choose this file by recovery: thanks to crybert http://forum.xda-developers.com/showpost.php?p=23321508&postcount=24
(or try this link http://www.mediafire.com/?mjabvv2loub3z35 )
wow, now you have a brilliant deodexed ROM! If everything went fine this far all apps and datas are still where they should be.
Make a backup!
5) now its getting vibrant - you can beginn modding your phone.
[TOOL] - Galaxy S Plus Configurator BETA 5 thanks to broodplank1337 [EDIT It will work on all recent deodexed roms (xxkps till xxkq7)]
http://forum.xda-developers.com/showthread.php?t=1466056
A great tool! Download it, start it, try it. It tells you what to do - so please read the text and do it that way - no error occured to me.
Start with kernel, then accelerator and so on. Make your choice. [EDIT your ROM has now an Antutu (benchmark tool) score of about 3600 -for example with feacore 1.4 1,8 GHz, UNiversal adrenaline shot 13 and sio I/O SCheduler you get about 4360 points!]
There is also an option for boot loops - I did not try it, but have it in mind, in case of..
So, now you have your phone as you like it - good luck and have fun!
can we please have this as a sticky... will prevent a lot of newbies asking questions regarding this... its simple and easy instructions... thanks
p.s. its in the wrong section (should be in general)... but it might get lost in the "I9000 jungle" so i dont mind it being here
lioncc could you please proof the links. I get a 404 error.
thanks crybert - now it should work
tq..
now i can teach my friends using this tutorial..
its hard to teach blindly via facebook..tq very much.
Thanks for posting my configurator
Thanks for the thread.... this is very much helpful for noobs like me to tweak and understand our device cheers to you bro!
---------- Post added at 09:13 AM ---------- Previous post was at 08:47 AM ----------
lioncc said:
well, I own the 9001 now for 4 days, had a lot of boot loops, recoveries and am finally satisfied - I want to show you an easy way to get there faster:
1) root (easy) http://forum.xda-developers.com/showthread.php?t=1253707
thanks to KeksKlip - (to get into recovery you need to shut off, press Volume up and Power until Samsung appears, then wait for the box and press menu)
2) recovery (not so easy) - you will be happy to have a backup, so this is really wise to install it. The recovery from RomManager does not work - you have to install this modded recovery.
http://forum.xda-developers.com/showthread.php?t=1331164 [Release]FeaMod Recovery 1.4 - based on CWM Recovery v. 5.5.0.4. thanks to manveru0
You have to flash only FeaMod v1.2 (you need not more than that) therefore you need odin and AriesVE - links at the bottom of this thread. (you need them also for the next step)
To get your Phone into downloading mode you have to shut it down and press power volume down and home at the same time. After 5 seconds you see a nice downloading picture.
After flashing sucessfully you can make your fist backup (chose backup to internal card -it is faster)
3) new ROM (easy when you succeed with the last step) http://forum.xda-developers.com/showthread.php?t=1533029 [ROM] I9001XXKQ7 [Android 2.3.6] thanks to mozgoder
Same procedure as before. You have to flash it by downloading mode.
Now you have a odexed KQ7 ROM (you need something like that for step 5) -and a nice lockscreen!
3a) root it (point 1 again) and install busybox installer from the market (I am not sure, if it is necessary, but you will need it later)
4) deodex your ROM (easy) - this step is required for installing additional themes etc. you can install it by recovery - that means, you have to copy the file to (internal) sdcard and choose this file by recovery: thanks to crybert http://forum.xda-developers.com/showpost.php?p=23321508&postcount=24
(or try this link http://www.mediafire.com/?mjabvv2loub3z35 )
wow, now you have a brilliant deodexed ROM! If everything went fine this far all apps and datas are still where they should be.
Make a backup!
5) now its getting vibrant - you can beginn modding your phone.
[TOOL] - Galaxy S Plus Configurator BETA 5 thanks to broodplank1337
http://forum.xda-developers.com/showthread.php?t=1466056
A great tool! Download it, start it, try it. It tells you what to do - so please read the text and do it that way - no error occured to me.
Start with kernel, then accelerator and so on. Make your choice.
There is also an option for boot loops - I did not try it, but have it in mind, in case of..
So, now you have your phone as you like it - good luck and have fun!
Click to expand...
Click to collapse
question on the S Plus configurator... will it work on stock deodexed rom? I thought its for broodrom?
rykn21x said:
Thanks for the thread.... this is very much helpful for noobs like me to tweak and understand our device cheers to you bro!
---------- Post added at 09:13 AM ---------- Previous post was at 08:47 AM ----------
question on the S Plus configurator... will it work on stock deodexed rom? I thought its for broodrom?
Click to expand...
Click to collapse
It will work on all recent deodexed roms (xxkps till xxkq7)
excluding zskp6/zskp7
From now on you can flash Feacore Recovery v1.4 directly from odin, no need to flash v1.2, check the feacore thread.
here's the link for v1.4 odin i'ts only the recovery no kernel http://dl.dropbox.com/u/63588663/FeaRecoveryV1.4.tar.md5
nail16 said:
From now on you can flash Feacore Recovery v1.4 directly from odin, no need to flash v1.2, check the feacore thread.
here's the link for v1.4 odin i'ts only the recovery not kernel http://dl.dropbox.com/u/63588663/FeaModRecovery_1.4.tar.md5
Click to expand...
Click to collapse
There kernel 136!!?
I put the kernel changes!!
I don't understand ?
!!!
Unpack the tar There a kernel!?
alexyuh said:
Unpack the tar There a kernel!?
Click to expand...
Click to collapse
Yes that's a stock kernel
just flash the .md5 file with odin
???
how to flash without the kernel?
FeaMod 1.4? just flash the .md5 file with odin
Here use this it's only the recovery http://dl.dropbox.com/u/63588663/FeaRecoveryV1.4.tar.md5
thanks broodplank1337 and nail16 - I include your comments into the first post
hi i use kq7 stock rom and for me is very stable original kernel, root, deodex, tw4launcher, extenderbar. i wont change my phone keypad(original keypad green) whit ics phone (keypad black and cyan) is possible. What should I do? thanks for reply bye
Its gr8 to see such topic nd discussion friends i m glad to be a part here in xda wid u all dev
Sent from my GT-I9001 using XDA Premium App
Im running XXKQ7 stock rom (rooted) and have installed FeaMod recovery. If i understand correctly i need just to download that zip with deodexed rom and flash it via recovery? Should I wipe data/factory reset before flashin it?
No you don't have to wipe data but wiping cache would be good
deodexed rom include deodexed apps and framework so these don't effect you'r rom data cause data is a seperate partition anyways
you can also do this manually using adb
Hey guys...here is the Complete system themed zip of cynogen for Celkon A200....
Enjoy...
Steps to install are pretty much same.....
1) Download Zip
2)Flash via CWM
if liked dont forget to press thanks...costs you nothing
Any views About??
http://forum.xda-developers.com/show....php?t=2191357
First custom Rom
http://forum.xda-developers.com/show....php?t=2191357
First custom Rom
I am not the owner of this mod, just want to share it with you guys.. Tested on SGP311 5.0.2 Odexed ROM
Original thread by @SonyRiFle:
http://forum.xda-developers.com/crossdevice-dev/sony/mod-xreality-supervivid-lollipop-t3117853
PLEASE TAKE A BACKUP OF YOUR ROM BEFORE PERFORMING THIS MOD.....
Requirement:
1. Rooted Device
2. XZDual recovery installed, take the latest version:
http://forum.xda-developers.com/showthread.php?t=2261606
3. Download the zip attached below.
Note: the original zip from the main thread has Settings.apk that is not working properly in our tabZ. So I deleted it in the zip.
Installation:
1. Add these lines under your build.prop...
ro.service.swiqi3.supported=true
persist.service.swiqi3.enable=1
ro.service.xrfm.supported=true
persist.service.xrfm.mode=1
2. flash via Cwm or twrp using XZDual recovery
NOTE: If Image Enhancement doesn't appear on Settings, just try the fix on the main thread.
you can find Image enhancement settings below Mobile Bravia engine.
ENJOY!!!
THIS PROJECT IS NO LONGER SUPPORTED.
UPDATED 27/04/2017 Content written in RED...... NEW UPDATE 24/3/2018 CONTENT WRITTEN IN BLUE
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
24/3/2018: Miui8 Added. Flash and Go as usual. No NVRAM fix needed (at least i didn't need to flash it,you might have to if you get the nvram error in wifi).
-BUG: You have to manually set IP, dont let it do it automatically DHCP is broken in this build
***Please tell me any extra info as i haven't fully tested it out yet***
24/3/2018: Lineage OS (6.0.1): same as always with 6.0.1 aosp builds, Flash, Dont reboot and install nvram fix. then reboot and your good to go. Might need Gapps in this build.
24/3/2018: !!!THE BIG UPDATE TO NOUGAT!!!!
-Resurrection Remix Nougat:
Install as usual, no Nvram fix is needed this time around.
Download and install gapps 7.0.1 pico or what ever version you like.
If you have a SD-card inserted a warning will pop up, if you have files on there remove them before flashing the rom. After you have saved your files format it as internal and you will be good to go.
*ALSO KERNEL SOURCES ARE NOW AVAILABLE*
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***
Reserved
Links are now live and ready! Removed country lock from firmware so it can be installed on any Vodafone Smart Tab 4 in any country and on any *Service.
*Haven't been able to find a tester.
Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?
lintronics said:
Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?
Click to expand...
Click to collapse
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%
Brilliant. Took a bit of trial and error since I've not worked with this tool before but got my tablet updated to 4.4.2 at last. Thanks so much for putting this together, I really thought I'd be stuck on 4.2. Just gotta figure out how to root now, that doesn't seem to be working.
How to find exact model of my Vodafone Smart Tab 4 ?
Can i flash this on my iusacell alcatel pop 8 p320a? I need kitkat
Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help
Artur1993 said:
Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help
Click to expand...
Click to collapse
Just change the file extension to Zip
---------- Post added at 03:00 AM ---------- Previous post was at 02:58 AM ----------
Valkiry said:
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%
Click to expand...
Click to collapse
Does this allow the Tab to make and receive calls over GSM? Is this unbranded firmware not Vodafone firmware?
You need root access to install custom recovery via adb in fastboot, so you mean get root, install recovery then remove SU before flashing?
Okay so the first dump (4.2.2) is stock firmware from Hungary Vodafone used by mtktools to flash, please not this does not have super user so your device is allowed to update to the 4.4.2 file.
Second file is an update to 4.4.2 for those that missed out on the OTA release because they had root.
Third file is a custom debloated 4.4.2 flashable through CWM.
Never install SU on hungary 4.2.2 firmware as you will never get to upgrade to 4.4.2 firmware.
Updated with new files please check post #1
Gapps on RR v5.7.4 is now fully functional. Enjoy please dont Forget to hit that Thanks button!
New RR 5.7.4 Update:
THIS IS A TWRP RESTORE METHOD!
Replace DATA.* and SYSTEM.* files in one of your own backups of RR5.7.4!
Updated SU to 2.79
Busybox Updated
Gapps Installed
DivineBeats V9 installed
Please note there will be alot of missing apps as i needed to make room in system partition for this. There will be no call functionality, or messaging functionality. Also music player app is gone along with YGPS and Adaway. Let me know how you guys go
Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).
Where is the Scatter File for MT8382?
Cookiestalker said:
Where is the Scatter File for MT8382?
Click to expand...
Click to collapse
There is no scatter file for MT8382. Vodafone changed it to lock people out of backing up. The original scatter file provided is the real device code. Why are you asking for MT8382?
przenczo said:
Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).
Click to expand...
Click to collapse
Extract the files and re-ZIP it as a zip file. I made a mistake. It won't affect install
Valkiry said:
UPDATED 27/04/2017 Content written in RED
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***
Click to expand...
Click to collapse
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy
bussi2010 said:
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy
Click to expand...
Click to collapse
Glad I could help you out dude! There is 7.1 floating around but it's not very good and I don't use this device much anymore. If I do end up doing it ill post it here. Don't forget to hit tthat thanks button
HI!
I pulled some files rom my Vivax tpc-101 3G to try porting a custom ROM. Since that didn't work out I wanted to post the files here for someone that might need a stock rom, kernel, recovery, twrp... or wanted to try porting a ROM.
Files included in this folder:
- stock kernel
- magisk kernel
- stock recovery
- twrp port from a porting tool
- TWRP backup of system
NOTES:
- Touch is not working correctly on TWRP (flipped and inverted touch)
- System backup is rooted with magisk and contains some build.prop tweaks. Changed boot animation.
DOWNLOAD:
- Drive Link
PS:
Could anyone make a flashable zip out of the twrp bakup? I tried but I don't know how to create the updater-script and there is no ROM for this tablet that I could use as a flashable zip base.