I'm trying to use Gear 2 with Nexus 4. The most annoying thing is next: when I'm calling, or receive call, phone transports audio to the Gear, and I need to push the button on gear, to move the stream to phone again. So, there is the question - is there any way either to prevent android to send audio to headset by default, or prevent gear to receive this, or move automatically stream to phone somehow.
I have root on gear and on nexus, if this matters
vasily_pupkin said:
I'm trying to use Gear 2 with Nexus 4. The most annoying thing is next: when I'm calling, or receive call, phone transports audio to the Gear, and I need to push the button on gear, to move the stream to phone again. So, there is the question - is there any way either to prevent android to send audio to headset by default, or prevent gear to receive this, or move automatically stream to phone somehow.
I have root on gear and on nexus, if this matters
Click to expand...
Click to collapse
I use the same combination of gear and phone.
I also don't like the calls to come in on the Gear, if I am expecting calls, I unpair the bluetooth to prevent it, but that is not a good solution.
I want to take phone calls on my phone only, like you.
I couldn't find a way to prevent it.
I hope too someone else did.
maybe we need to uninstall one of the provider apk's
klwinkel said:
I use the same combination of gear and phone.
I also don't like the calls to come in on the Gear, if I am expecting calls, I unpair the bluetooth to prevent it, but that is not a good solution.
I want to take phone calls on my phone only, like you.
I couldn't find a way to prevent it.
I hope too someone else did.
maybe we need to uninstall one of the provider apk's
Click to expand...
Click to collapse
I have been looking for a solution for this as well. The fact that I'm using a bluetooth stereo headset makes it even more complicated. I did however found this post
http://forum.xda-developers.com/showthread.php?t=2734876
Basically it recommends us to use tasker and secure settings to disconnect gear 2 when phone rings or 'off hook'.
hope that helps.
Related
I have my S2 connected to my Nexus 6 via bluetooth. My S2 is the LTE version with T-mobile. When someone calls my cell, it rings on my Nexus as well as the S2. I'm ok with that. But if I answer the call on my Nexus, my S2 acts like a speaker phone. Don't like that. I want to be able to answer call on my nexus and use the nexus for the call or answer the call on my S2 and take the call on that. Is that possible?
Fron my understanding if you are using your watch on Bluetooth connection then the watch will act like a Bluetooth speaker if you answer a call on your phone. Only work around is to disconnect Bluetooth from your phone when you answer the call. Think of playing music thru a portable Bluetooth speaker and receiving a call while listening to music. You'd just disconnect Bluetooth from your phone to have a private convo.
Any help from HERE?
Yeah. I read that too. Not happy about it. Samsung needs to fix that issue. I had the urbane before s2. The s2 seems more of a work in process. Miss the integration of Android apps into the watch such as spotify.
Another reason Samsung needs to get rid of Tizen and only use Android Wear.
I have a Samsung Note 5 and don't have that problem. I can answer from either the phone or the watch on my S2 T-Mobile. If I had a non Sammy phone I would not be happy, hopefully they will fix in an update, or a Dev will put out a program to help. They advertise the watch as working with any Android 4.4 or above phone, they do not mention limitations if you are not on a Samsung phone.
I came up with a solution that fixes part of the problem. I use an app on my phone called Macrodroid. It's an automated task app. I created a macro that when I answer a call on my phone , it turns off bluetooth and vice versa when I hang up. So that works fine when I answer a call on my phone the call is not picked up by the S2. But when I answer the call on my S2, Macrodroid can't tell tell the difference that I'm answering the call on my S2 not the phone and turns off bluetooth. Not good!. There are more sophisticated macro apps out there, but I'm not that good with those. Maybe someone smarter than me can create one.
I also used Macrodroid to automatically call forward (and cancel forward) my cell phone to my watch when they are disconnected via bluetooth.
Go to settings, Bluetooth, and click the gear next to your watch. Uncheck phone audio. No problems now hopefully that's what you're looking for
paoloroeseke said:
Go to settings, Bluetooth, and click the gear next to your watch. Uncheck phone audio. No problems now hopefully that's what you're looking for
Click to expand...
Click to collapse
this solves the problem!
You dont want to use a macro to turn off bluetooth completely when a call comes in , especially if you use a Bluetooth headset with your phone..
I had forgotten where I'd seen this until now.
paoloroeseke said:
Go to settings, Bluetooth, and click the gear next to your watch. Uncheck phone audio. No problems now hopefully that's what you're looking for
Click to expand...
Click to collapse
I kept trying to find the "Phone Audio" setting on the watch's bluetooth settings, not the phone's. Doh!
crp
paoloroeseke said:
Go to settings, Bluetooth, and click the gear next to your watch. Uncheck phone audio. No problems now hopefully that's what you're looking for
Click to expand...
Click to collapse
Awesome! Been trying to figure that out for days!!!
hi guys
im not getting any option to answer calls..
only option to reject from the watch
i know the watch has no speaker.but i thought it woudl allow me to answer like android wear..and then i speak on my phone
i tried googling..some said it worked before an update..does anyone know which version of the gear app allowed this?
or is there a way to fix it
i've checked and all permissions are given to the app
Mayur
mayurh said:
hi guys
im not getting any option to answer calls..
only option to reject from the watch
i know the watch has no speaker.but i thought it woudl allow me to answer like android wear..and then i speak on my phone
i tried googling..some said it worked before an update..does anyone know which version of the gear app allowed this?
or is there a way to fix it
i've checked and all permissions are given to the app
Mayur
Click to expand...
Click to collapse
This thread suggests that the option to answer calls on BT-only watches works only with Samsung phones: http://forum.xda-developers.com/gear-s2/help/question-answering-call-watch-t3251133
tstreete said:
This thread suggests that the option to answer calls on BT-only watches works only with Samsung phones: http://forum.xda-developers.com/gear-s2/help/question-answering-call-watch-t3251133
Click to expand...
Click to collapse
thanks for your reply and help. i did read that..but some people said it used to work..was wondering which version worked..
silly of samsung to disable this feature.
I still have an option to answer a call on my s2 classic. I hope it wouldn't just disappear like the messaging on the 4 app shortcut widget.
I recently went between an s7 edge and a pixel with my gear s2. I noticed I was no longer able to take calls on the watch when I went over to my pixel, but it was not a problem when using my s7 edge.
I figured it out. I don't know why, but I can say for certain that when a gear watch connects to a samsung phone, it defaults to the connection being a media and phone device (rather than the low-powered mode that, say, android wear watches do). Automatically. Always. On my pixel, the connection as a media and phone device must be initiated manually.
On my pixel I went to bluetooth devices and connected to my gear s2, which connected as a media and phone device. After that, the watch will answer phone calls on the watch directly. This all makes sense. The only difference is that on my pixel (anything other than my samsung phone actually), it does not default to connecting to the watch as a media/phone device (only low-powered peripheral).
Hope that helps.
I know this is old, but I wanted to offer a solution to the same problem I faced with a ZTE Blade Max. Goto bluetooth settings and click S2 in paired items then settings or options, then tick the option for phone audio. Problem solved!
cellfonepimp said:
I know this is old, but I wanted to offer a solution to the same problem I faced with a ZTE Blade Max. Goto bluetooth settings and click S2 in paired items then settings or options, then tick the option for phone audio. Problem solved!
Click to expand...
Click to collapse
Hi there! I've tried to use this solution but I can't find any kind of option as the one you suggest. I have a Xiaomi Redmi note 7. Is there any other option you can offer? Thank you so much for your time!
you have to change your build.prop to show a samsung device. cent remember where it is in the build.prop, but im fairly certain that this is the issue. This popped up pretty frequently back when the watches first came out and i had to do this myself as i was running an AOSP ROM on my old S5 when i got my first smartwatch (Gear 2 Neo) until i flashed android wear on it and no longer had the option to answer calls at all on my watch
The Problem: On many non-Samsung phones, all calls, even when answered on the phone itself, get sent to the watch's speakerphone, requiring the user to manually switch the sound back to the handset every time a phone call happens. As a side problem, the watch conflicts with other Bluetooth devices capable of of being used for calls, like car stereos and headsets. Several threads on xda and elsewhere discuss these issues; however, the only solution posted is to disable the "Phone Audio" profile of the watch in settings. This is sub-optimal because it completely disables the ability to use the watch as a phone speaker.
The Solution: I have put together a series of Tasker profiles and tasks that utilize the BlueTask plugin to control the connection of the Gear S3. A convenient detail about BlueTask's disconnection method is that it only seems to affect the "Phone Audio" component of the Gear S3, leaving all other functionality untouched during a call. I use the proximity sensor to determine whether or not the call is being made/answered on the phone itself vs the watch. The assumption is that if you leave you phone in your pocket, bag, or face down on the desk, then you answered the call via the watch. I understand this is not a perfect method for determining which device is answering the call, but it works pretty well in my testing. In addition, an exception is made for when a wired headset is hooked up to the phone, as one may leave their phone in their pocket while answering using such a headset. Finally, an additional profile I call the "Car profile" will automatically disconnect the watch and disable its Tasker profiles while connected to specified Bluetooth devices like a car stereo, Bluetooth headsets, etc.
Setup:
Re-enable "Phone Audio" for Gear S3 if you previously disabled it (Settings>Bluetooth>Gear S3)
Install Tasker (if you haven't already)
Install BlueTask
Go to Tasker>Preferences>UI>Beginner Mode. Disable it (if it is not disabled already).
Go to Tasker>Preferences>Monitor>Display Off Monitoring>Proximity Sensor. Set it to "Yes"
Download the Tasker project attached to this post to your phone
Import the project into Tasker (Press and hold the home tab in the bottom left corner of tasker and then click Import)
Enter the new "Bluetooth" project and open "Car Profile" in "Profiles"
Delete the Dummy MAC address in the Profile and replace it with the MAC addresses of any car stereos and/or bluetooth headsets you use with your phone. If you have multiple of such devices, separate each address with a "/" (the magnifier glass icon does this for you). If you have no such devices, feel free to disable or delete this profile.
Open "Disconnect Gear S3" in "Tasks"
Open the "BT Connection" action
Replace the dummy information with your Gear S3's Name and MAC address
Repeat steps 10, 11, and 12 for the "Connect Gear S3", "Car Mode", and "Exit Car Mode" tasks.
Complete!
Let me know if this works for you. Also, suggestions for how this project could be improved are welcome.
Its works fine on #LGV20 so no need for this fix.
Sent from my LG-H990 using Tapatalk
I've downloaded the project to my phone but when I launch tasker and try to import the profile I can't find the file, even though I can see it using a file explorer. I've changed the.Prj to .prf and Tasker sees it but when I try to import it it gives me an error that says the for contains multiple projects.
Any help would be appreciated, thank you
OneRealDaniel said:
I've downloaded the project to my phone but when I launch tasker and try to import the profile I can't find the file, even though I can see it using a file explorer. I've changed the.Prj to .prf and Tasker sees it but when I try to import it it gives me an error that says the for contains multiple projects.
Any help would be appreciated, thank you
Click to expand...
Click to collapse
Is it downloading as a .prj or .prj.xml ? It should be the latter. If it isn't, rename it to have a .prj.xml extension. Otherwise, not really sure what is going on. I haven't had any trouble importing Tasker projects in the past.
Beginner mode
MehStrongBadMeh said:
Is it downloading as a .prj or .prj.xml ? It should be the latter. If it isn't, rename it to have a .prj.xml extension. Otherwise, not really sure what is going on. I haven't had any trouble importing Tasker projects in the past.
Click to expand...
Click to collapse
Thanks for getting back to me. Im new with Tasker, the only reason I bought it was because of this issue and because I saw your post. All I needed to do was disable beginner mode in preferences, under Ui, and the house icon appeared, from there it was very simple to follow the instructions. Thank you for sharing your solution to this very inconvenient problem.
Once I get to test it ill make sure to give you feedback.
OneRealDaniel said:
Thanks for getting back to me. Im new with Tasker, the only reason I bought it was because of this issue and because I saw your post. All I needed to do was disable beginner mode in preferences, under Ui, and the house icon appeared, from there it was very simple to follow the instructions. Thank you for sharing your solution to this very inconvenient problem.
Once I get to test it ill make sure to give you feedback.
Click to expand...
Click to collapse
Thanks for letting me know about that, I'll add that to the steps.
Hi i downloaded the App but seems it doesnt work for me. I set it up according your instructions but still no change. But i háve an idea i spoted that when i make call from phone i háve an option to choose which audio divice to use if i select my phone it doest work but when someone picks up and then i select it it Works. So i am thinking is there a way to make this automatic? That once someone picks up a call that it select this option right after.
Added 2 screenshots one from the Standard run and one of the option to select an audio divice when making a call.
Thx for any help.
Edit: Works Now thx alot i had an incorrect name set for the device... i will test it if it works always but so far so good. thx alot
Jafabibe said:
But i háve an idea i spoted that when i make call from phone i háve an option to choose which audio divice to use if i select my phone it doest work but when someone picks up and then i select it it Works. So i am thinking is there a way to make this automatic?
Click to expand...
Click to collapse
I wanted to use this system as part of the automation workflow. The problem is that, when dialing someone, it switches the audio output when they pickup, instead of during Phone Offhook (the moment you hit dial). As a result, I can't detect the actual moment the audio device is switched, so I disable the watch audio entirely to prevent it from from happening.
Hello guys. I have non rooted stock nexus 5x. I have followed steps from first post but I always get error (attached).
Please any ideas what's going on?
Edit: Sorry guys. Please ignore it. I have added wifi mac for gear instead of bluetooth mac. I'm going to test it.
I am trying to use this for my phone.
I opened the prj.xml in notepad, edited my MAC address and name of bluetooth for car and gear s3.
When i press the play button in the bottom left corner i get the error non-existing plug-in code type Action: 704475526.
Any idea what i can do?
Thanks.
GabrielAK89 said:
I am trying to use this for my phone.
I opened the prj.xml in notepad, edited my MAC address and name of bluetooth for car and gear s3.
When i press the play button in the bottom left corner i get the error non-existing plug-in code type Action: 704475526.
Any idea what i can do?
Thanks.
Click to expand...
Click to collapse
Probably install Bluetask as per the instructions.
I solved the problem using Macrodroid.
GabrielAK89 said:
I solved the problem using Macrodroid.
Click to expand...
Click to collapse
Can you tell us, the other users, what you did to get it solved ?
As we are in a forum, others can benefit using your solution.
So please share.
I just got my Nokia 8 Sirocco, and I thought it was bad BT performance on my new device, when it probably is my Gear screwing me over. Thank you for this Tasker-project, I've just finished setting it up, and l am looking forward to seeing is effect!
Unfortunately, the macrodroid way don't work anymore for me.
Don't know why.
I am retrying the Tasker way. I get the error:
12.53.42/E FIRE PLUGIN: Connection / com.twofortyfouram.locale.intent.action.FIRE_SETTING: 8 bundle keys
12.53.42/E Connection: plugin comp: com.balda.bluetask/com.balda.bluetask.receivers.FireReceiver
12.53.42/E add wait type Plugin1 time 60
12.53.42/E add wait type Plugin1 done
12.53.42/E add wait task
12.53.42/E Error: 2
Does anyone know what it means?
LE: When i am in the car i don't get this error. Everything seems to be with green dot. But the magic never happen. The tusker is not triggered. Should i make other settings to work?
I also tryed Bluetooth auto connect. Bad luck with that also.
Hi!
I've been meddling with Tasker for the past few days and discovered that choosing the Headset profile to connect to and disconnect from the Gear S3 works better for me.
I've started out with MehStrongBadMeh's guide and tasker xml file (many thanks by the way!), but found out my phone was unable to connect the Gear S3. It disconnected OK to connect the car bluetooth, but would not reconnect Gear S3. Running the task also gave errors as reported by few others on this thread.
But everything seems to be in order when Headset profile is selected for Gear S3. Will test out extensively and will report back if I need to change anything else.
I believe I created that xml was created before bluetask handled specific profiles, hence the need to explicitly set headset now. I don't actually use this profile anymore, as calls started being routed properly when I updated my HTC 10 to Oreo (and continue to be routed properly on my OnePlus 6).
Just wanted to say a massive thank you for this. I have just bought the Galaxy Watch and have a Samsung S6 Edge with lineageos. I was having the issue where everything was being rooted through the watch. Your guide has got this working as it was designed.
My notes would be for anyone trying this - do not change the device name as it doesn't seem to work (i am guessing this is referenced in other profiles) - just change the mac address to your watches Bluetooth mac address.
Any update on this I still get an Error 2 and it never seems to connect on its own to my car audio
Solved with MacroDroid:
Trigger: Call active (any contact)
Action: Kill application Galaxy Wearable
Constraints: Trigger fired Call active
AND In call
App Alive BG Galaxy Wearable
hi,
i recently got a gear s3 classic, wifi and bt edition.
whenever i want to make a call from the watch its just erasing the numbers and doing nothing. also when im trying to call a contact, it's freezin for a few seconds and after its doing nothing. when i receive a call i can just decline it but not accept it. my bluetooth seems proberly connected, im getting notifications and similiar thing, also the gear app says im connected. using it with a oneplus2 on RR, android 7.1.2.
i hope someone got fix for this.
iLucas said:
hi,
i recently got a gear s3 classic, wifi and bt edition.
whenever i want to make a call from the watch its just erasing the numbers and doing nothing. also when im trying to call a contact, it's freezin for a few seconds and after its doing nothing. when i receive a call i can just decline it but not accept it. my bluetooth seems proberly connected, im getting notifications and similiar thing, also the gear app says im connected. using it with a oneplus2 on RR, android 7.1.2.
i hope someone got fix for this.
Click to expand...
Click to collapse
Do you have other devices paired to your phone? If so, you might experiment by UNpairing other devices (headphones, bt speakers, whatever) and then try again.
I've seen my go both ways. But I prefer it paired with my car so have tried to limit the bt pairing between my phone and the watch to notices and some data updates but NOT voice.
fred2546 said:
Do you have other devices paired to your phone? If so, you might experiment by UNpairing other devices (headphones, bt speakers, whatever) and then try again.
I've seen my go both ways. But I prefer it paired with my car so have tried to limit the bt pairing between my phone and the watch to notices and some data updates but NOT voice.
Click to expand...
Click to collapse
thanks for your answer. i've tried this, doesn't work. i've also reseted my watch already and reinstall all the samsung stuff. not working at all.
ive fixed the problem so far. its caused by the rom, if i use the oxygenos it's working
I can confirm that there are a few custom roms (7.1.2) which supports the calling functionality in OP2.
You don't really have to move back to the stock Oxygen OS. :good:
PureNexus
HalogenOS
AICP etc..
Does anyone else have this problem? I just got the Galaxy 4 smart watch (bluetooth, not lte version) a few days ago. When I initiate a call from the watch it dial and says "See phone" and the call is now coming through the phone. I can click a button on the phone to send the call back to the watch but obviously this defeats the convenience of not needing to have the phone in arms reach.
My husband figured out that its some kind of interference with other connected bluetooth devices (even though they are off), like my car and handsfree earpiece. If I unpair each of those items, calls work as they should. As soon as I re-pair another bluetooth device the problem resurfaces. I'd rather not have to pick one or the other to work if I can help it. Samsung support hasn't been able to fix it. Any ideas?
I should have clarified, I'm wondering both who does and who doesn't have this issue. Please comment even if yours works perfectly.
Samsung support seemed to suggest it was a software issue thar might be able to be fixed in a future update but I'm not sure if its an issue for anyone other than me.
Maybe you should take a look at this topic https://forum.xda-developers.com/t/...hange-default-behavior.4369423/#post-86031957