Related
04/07/2011 UPDATE -- GREAT COMPILATION OF INFO HERE: http://forum.xda-developers.com/showthread.php?t=1026660
And another FAQ:
http://forum.xda-developers.com/showthread.php?t=874258 - please use this as an updated reference!
Also, this FAQ is VERY helpful: http://forum.xda-developers.com/showthread.php?t=865245
A good third-party doc on how to install the VEGAn ROM (not written by gojimi, FYI): http://www.blendblog.net/Blendblognet/tabid/36/EntryID/67/Default.aspx
or use this one, if that link is down : http://forum.xda-developers.com/showthread.php?p=12552736#post12552736
and lastly a good FAQ on the update.zip firmware process: http://forum.xda-developers.com/showthread.php?t=892090
This post last updated March 27th 2011.
Figured I'd start doing a brain dump of what I know, so far. Assume TnT Lite 4.x, as this is what I use. But stock / zPad / cm6.1 / all other 1.1-based ROMs might also work unless noted.
Please feel free to add to this FAQ with apps tested, general information etc.
---------------------------------------------------------------
General pre-sales / new user / "should I buy this?" information
Viewsonic support site: http://www.viewsonic.com/gtablet/support.htm. Their customer service is very good and I have used them many times. The only issue i have right now is a lack of information, but I don't fault CS for that.
Should you buy this?
It's up to you, but be aware of what you are getting into. Here's a quick breakdown of what you will / won't get:
- You are basically paying for hardware that is not optimized for Android. It's fast, but it could be a lot faster and we're hoping that future updates will take advantage of that. The hardware is bleeding edge, right now.
- The LCD screen is basically a netbook screen. With that in mind certain angles are really bad. It's looks pretty good spot-on, just like a netbook.
- HDMI works, but you need a dock which is not officially available yet (there is a zPAd dock that can be purchased, overseas).
- 720p/1080p might work, but needs to be encoded a certain way.
- Standard video seems fine, in particular Xvid AVI's.
- There are issues with games, right now. Some work, some don't. Simple as that. EDIT: There is a g-sensor fix that might correct this, in certain mods.
- There's an official app store, but it's not as extensive as the full Google Market.
- Angry Birds works.
- There's no official Flash support, yet (even as of 3/2011). That may change in the future and there are ways to get an unofficial patch (see below).
- To make the device really usable, you need to mod it and will need to be familiar on how to sideload apps. This is my opinion, of course.
The mods are not supported by Viewsonic, so keep that mind!
---------------------------------------------------------------
General information on the different unofficial ROMS available
- Vanilla restore image. This is an attempt by our community to have a restore image in case your device is having issues or you need to wipe any mods off before returning it. It will wipe the system data, but not the user data. For the latter, you'd want to do a factory reset under Settings -- Firmware. The link also has links to the actual firmware updates that TnT Inc. supports.
- zPad v3. This is a port of the zPad ROM to the GTab. Rothnic has spearheaded this effort.
- VEGAn-Tab. This is still a 1.00 beta firmware to port the Advent Vega firmware to the GTab. As of March 2011, it is fairly stable and very usable. The main dev (gojimi) is working on a Gingerbread port.
- TnT Lite v4. This is a streamlined version of the stock firmware. It leaves the status bar and settings area intact, for example - but removes the main TnT homescreen and replaces it with a stock launcher. It also has the same bugs as stock.
- CyanogenMod. This is an early beta so keep that in mind - I would recommend this only for technical users. It is an attempt to port cm to the GTab. Bekit has spearheaded this effort. There are a few recent efforts, mainly for Gingerbread.
Some cm links:
IRC: #tegratab in freenode.
Forum: http://tegratab.com
Complete nvflash restore: http://db.tt/Wm25t7U
CM6.1 (Beta4): http://goo.gl/Z3jaC
3/2011 EDIT: See the development area for more ROMs as there are more than I can review, here. This site has quite literally outgrown this one FAQ I had created.
---------------------------------------------------------------
Known issues
I used clockworkmod via ROM Manager and now I get a "Magic Value Mismatch" Error
AVOID ROM MANAGER, please. As of this writing, it installs a version of clockworkmod that does NOT play nice many of the ROMs we have, and might even have issues with stock ROMs. PLEASE AVOID!!
If you get that "Magic Value Mismatch", you have soft-bricked your device and will need to use the nvflash tool to correct that. See the development area for the nvflash sticky.
Date / Time reset to 1970 after powerdown / reboot
Update your ROM to correct this -- it's a fairly old issue.
GMT +0 after every reboot
This is a known bug with orignal TnT stock and TnT Lite 1.x, which some of us have already called VS about. It's probably somewhere in the TnT Framework. This was fixed with the 11/22 TnT firmware and the subsequent TnT Lite 2.00+. If you are on stock and see this, update your ROM.
Games cannot be played because they are titled by 90 degrees
This is a known bug with stock TnT / TnT Lite. No fix from the vendor, but certain ROMs (like VEGAn and TNT Lite) have a hack for this (care of dev gojimi!)
720p / 1080p h264 video problems
My understanding is that h264 HD playback works, but only to a certain point. Basically, videos encoded in "Main" Profile work, but those with "High" Profile do not. You can use a tool like mediainfo to see how your file in encoded.
I have used the excellent Handbrake application and an iPad profile, changing h.264 to MPEG-4 in the config, and that has worked for me on the device.
MicroSD is not being read by applications
This is a common issue with tablets, and I had seen this on my Pandigital Novel. Some applications are written to only read from /sdcard, which is the internal memory on our device. microSD is /sdcard2. So this is very hit and miss. On the zPAd, they actually map the microSD to /sdcard/sdcard1, which means that apps might be able to find that easier.
EDIT 1/2011: Some of the newer mods have an SDCARD2 fix, but it could cause media files to be deleted. A possible fix (to turn this feature off) is to create an empty file on the root of your microSD and call it ".nomedia". I have not heard of problems with the very latest mods or stock ROM.
There is no Market
Some of the mods do add the Google Android Market, but even so there are very few available apps visible. There is a fairly easy way to get around this, which is documented here: http://forum.xda-developers.com/showthread.php?t=845175
My device went to sleep and now I can't bring it back to life
This is a known issue with stock / TnT Lite 1.x+ -- the only known "fix" I know, other than opening up the device, is to let the battery drain until the device shuts itself off - this should take about 24 hours. Once this happens, you should be able to power it up again and recharge it. Newer ROMs may not have this issue.
Does the device accept 32GB microSD cards?
Yes. I own a 32GB microSD so I can confirm that.
My touch screen is all wonky / I have dead zones
See this post for a possible fix: http://forum.xda-developers.com/showpost.php?p=9774374&postcount=27
Also, try this GUI version (thanks gojimi!) : http://forum.xda-developers.com/showthread.php?t=934500
I have a zPad dock, but my Ethernet port is not working
See this post: http://forum.xda-developers.com/showthread.php?p=10242366#post10242366
---------------------------------------------------------------
Other General Information
Cases / accessories
So far, nothing supported but a few DIY's. We are building out a accessories section here: http://forum.xda-developers.com/forumdisplay.php?f=843
Running a firmware update / restore
All the ROMS use a standard firmware updater that can be used by non-technical users. Here is an explanation on how it works:
There is an "update.zip" file and a recovery foder with a file called "command". To flash your firmware, you place those on the root of your device's /sdcard. So, if your device is your F: drive for example, you should see F:\update.zip and F:\recovery\command.
Then, shutdown the device and boot up by holding the power button and volume up keys simultaneously for a few seconds - once you see the recovery text pop up in the upper left side, you can let go. The update will begin and the device will reboot about a minute later. After the reboot, I would highly recommend doing a device restore as that fixes a lot of issues (Settings -- Security -- Factory Data Reset).
You can also do this on a microSD - you just need to edit the command file and change "SDCARD" to "SDCARD2". For Windows users, don't add a .txt extension on the file as that won't work. The file name needs to be called "command".
The only ROM exceptions are the fully stock ones form Viewsonic / TnT, as I haven't touched those. You can use them in clockworkmod, or get the /recovery/command file from another ROM and then rename the stock ZIP to "update.zip" and combine them.
How to wipe data with Clockworkmod recovery (thanks to short/y for writing this!)
Boot into recovery (i.e. power down the device then power it up again while holding the volume up key) until you get the message that it's booting the recovery image.
Once you see the CWM (i.e. Clockworkmod) text screen, use the volume buttons to scroll down to the entry that says "wipe data/factory reset" (on CWM 2.5.1.2 it's the 3rd entry).
Press the Home key and, on the screen that comes up, scroll down to the line that says "Yes" and hit Home.
Once it's been formatted, return to the previous screen with the Back arrow until you're on the main screen where you can continue the process (flashing or booting).
thanks for putting all this information in one spot! ill be checking this thread when mine comes in tomorrow (was supposed to be today... so much for paying a little extra for expedited shipping.... grrr)
Thats really sad to know that it does not run videos well? I don't want to have to encode
videos to be able to watch on this thing...Not even with the side loaded apps?
Gajun said:
Thats really sad to know that it does not run videos well? I don't want to have to encode
videos to be able to watch on this thing...Not even with the side loaded apps?
Click to expand...
Click to collapse
I've tried several, with similar results. HD playback is very finicky with this device, at least as of this writing.
I have heard people state that h.264 720p works, but I have yet to see this in full 16:9 mode. 2:35 does seem to work. If someone has a file for me to test, I'll certainly download it. I hope that I can be proven wrong, here.
Gajun said:
Thats really sad to know that it does not run videos well? I don't want to have to encode
videos to be able to watch on this thing...Not even with the side loaded apps?
Click to expand...
Click to collapse
My G runs tnt 2.0. I downloaded an AVI and it plays well, but in 2.35 mode only, I couldn't zoom in...
Gajun said:
Thats really sad to know that it does not run videos well? I don't want to have to encode
videos to be able to watch on this thing...Not even with the side loaded apps?
Click to expand...
Click to collapse
Downloaded AVI's and FLV's work just fine with Rockplayer. I play AVI's in Hardware encoding mode, and FLV's with Software encoding mode.
Have you tried Act1 video player? I have used it for over a year on my Adroid phone and it will play pretty much anything. I installed it on the gtab earlier and playback is just as smooth as my computer. Plus it has the option to change aspects to suite the screen. One of the options, Full(stretch to full screen) looks great while playing an avi or any other format on the Tab.
Is it able to do GPS?
I loaded the NHL Game center app fine
But it wont let me watch games due to lack of gps signal
any ideas?
Thanks
sitnlow4life said:
Is it able to do GPS?
I loaded the NHL Game center app fine
But it wont let me watch games due to lack of gps signal
any ideas?
Thanks
Click to expand...
Click to collapse
No GPS on this thing.
sitnlow4life said:
Is it able to do GPS?
I loaded the NHL Game center app fine
But it wont let me watch games due to lack of gps signal
any ideas?
Thanks
Click to expand...
Click to collapse
Use the GPS on your phone via Bluetooth, assuming you have a smart phone
Google voice
No voice but texting works.
Steps I took
on my evo fully installed voice (switched roms recently didn't have it installed)
used Titanium to back up the app
Copied the 3 files to my titanium folder on the g tab
Restored the app
Lauched google voice. Got to where it said configure inbox then went back back back back to exit
inbox popped right up.
YMMV
Quick newbie question.... how to I drag/drop from my computer to the microSD? I'm on TnT lite.
Thanks!
-J
jdnyc said:
Quick newbie question.... how to I drag/drop from my computer to the microSD? I'm on TnT lite.
Thanks!
-J
Click to expand...
Click to collapse
It doesn't work on stock on TnT Lite. It's a bug that I hope VS will fix with their next release (crosses fingers).
roebeet said:
720p / 1080p h264 video problems
My understanding is that h264 HD playback works, but only to a certain point. Basically, videos encoded in "Main" Profile work, but those with "High" Profile do not. You can use a tool like mediainfo to see how your file in encoded.
I have used the excellent Handbrake application and an iPad profile, changing h.264 to MPEG-4 in the config, and that has worked for me on the device.
Click to expand...
Click to collapse
1. There is no iPad profile on handbrake
2. Which player did you use to play your encoded video?
Another newbie question... how do remove the Phone icon from the dock? I've tried a bunch of settings in ADW but can't get it to work.
Thanks!
jdnyc said:
Another newbie question... how do remove the Phone icon from the dock? I've tried a bunch of settings in ADW but can't get it to work.
Thanks!
Click to expand...
Click to collapse
Drag and drop any other icon which you need on top of it.
Thanks for the phone icon tip. One (hopefully) last question for a while. I'm using TnT Lite and have ADW. How do I change the wallpaper on my main screen? I can't find this option either. Really tried to find it but failed.
jdnyc said:
Thanks for the phone icon tip. One (hopefully) last question for a while. I'm using TnT Lite and have ADW. How do I change the wallpaper on my main screen? I can't find this option either. Really tried to find it but failed.
Click to expand...
Click to collapse
Long click on any empty space on your screen and choose wallpaper
Thanks. That wasn't working on my primary screen for some reason but worked on an empty one. k. Used up my stupid question tokens for the day...
artisticcheese said:
1. There is no iPad profile on handbrake
2. Which player did you use to play your encoded video?
Click to expand...
Click to collapse
I have on on the Linux version - my bad that I assumed the same on other versions - is there an updated profile, perhaps?
Recently attempted to view a embedded flash video (youtube) posted inside a android applications internal browsers and was confronted with a black box saying I needed to upgrade flash.
I'm currently using the most up to date version of flash available in the android market place. I'm just wondering if this is an issue on my part or if it's the way the video was posted? Does the application need to be coded in order to point to the player or flash embedded somehow into the application itself?
Not sure if an answer can be found without me giving more information that I don't have but figured I would ask anyways.
I have a samsung captivate but the issue was faced by all android users.
PS- We where able to view the video without issue if we simply went to the forums via our phones browsers.
Thanks for any information,
I have a Xoom MZ604 WiFi purchased in Canada. I have updated the OS to HC 3.2 US version. My rationale for this is that I will never be satisfied with the device remaining "Canadian" as any updates will always be delayed or, maybe, never will happen (ref. Motorola Dext/Cliq) for those of us outside of the US. I am not going to waste any more of my time with what might be a semi-orphaned Canadian version of the OS.
The upgrade to HC 3.2 appeared to go without a hitch. However, I have a few questions. If anyone can offer some answers, I would be most grateful.
1. I have found little difference in the stock browser performance when using HC 3.2 compared with HC 3.0.1. Many people seemed to have reported major improvements. I haven't seen these. I am wondering why. I was not really dissatisfied with the browser performance under 3.0.1, though occasionally there were pauses of a few seconds when pages were being loaded. Is my experience unusual?
2. In fact, I have found what seems to be a degradation of stock browser performance under HC 3.2 in two respects. First, I have noted that, when a page is reloaded, e.g. when scrolling, I often see blank rectangles of the screen (maybe 10%), which don't load immediately. There is a delay of a second or so before the page is completely written with these last few pieces of the screen. Second, there have been a few occasions when a browser page has disappeared without me doing anything, and the screen returns to the desktop. When this happens, there is no forced close indication, the web-page just disappears. I have found this to happen particularly on forum.xda-developers.com web-pages, though it may happen on others as well.
3. I noticed this morning that my personally installed apps had disappeared from the desktop. I was just left with the standard ones that come with a clean device. These apps were still in the My Apps list and I restored them by dragging them to the desktop. I am wondering if anyone else has seen this happening.
4. I want to be able to use micro-SDHC cards with full R/W capability and would also like to have a fully functional micro-USB capability (via an OTG cable, which I have), which can see flash-drives formatted with FAT32. For these functions to work, I understand that I will have to use the Tiamat kernel and be rooted. However, what is making me hesitate is that I have seen several notices relating to this, saying that the procedure should only be attempted with US WiFi Xooms. I am speculating that this may simply be because these procedures were tested on a US WiFi Xoom. Can somebody please confirm for me that it should be just as safe to update to rooted/Tiamat with a Canadian-purchased Xoom as it would be for a US one and that the instructions will be the same.
Thank you.
Gordon
Gordon1M said:
I have a Xoom MZ604 WiFi purchased in Canada. I have updated the OS to HC 3.2 US version. My rationale for this is that I will never be satisfied with the device remaining "Canadian" as any updates will always be delayed or, maybe, never will happen (ref. Motorola Dext/Cliq) for those of us outside of the US. I am not going to waste any more of my time with what might be a semi-orphaned Canadian version of the OS.
The upgrade to HC 3.2 appeared to go without a hitch. However, I have a few questions. If anyone can offer some answers, I would be most grateful.
1. I have found little difference in the stock browser performance when using HC 3.2 compared with HC 3.0.1. Many people seemed to have reported major improvements. I haven't seen these. I am wondering why. I was not really dissatisfied with the browser performance under 3.0.1, though occasionally there were pauses of a few seconds when pages were being loaded. Is my experience unusual?
2. In fact, I have found what seems to be a degradation of stock browser performance under HC 3.2 in two respects. First, I have noted that, when a page is reloaded, e.g. when scrolling, I often see blank rectangles of the screen (maybe 10%), which don't load immediately. There is a delay of a second or so before the page is completely written with these last few pieces of the screen. Second, there have been a few occasions when a browser page has disappeared without me doing anything, and the screen returns to the desktop. When this happens, there is no forced close indication, the web-page just disappears. I have found this to happen particularly on forum.xda-developers.com web-pages, though it may happen on others as well.
3. I noticed this morning that my personally installed apps had disappeared from the desktop. I was just left with the standard ones that come with a clean device. These apps were still in the My Apps list and I restored them by dragging them to the desktop. I am wondering if anyone else has seen this happening.
4. I want to be able to use micro-SDHC cards with full R/W capability and would also like to have a fully functional micro-USB capability (via an OTG cable, which I have), which can see flash-drives formatted with FAT32. For these functions to work, I understand that I will have to use the Tiamat kernel and be rooted. However, what is making me hesitate is that I have seen several notices relating to this, saying that the procedure should only be attempted with US WiFi Xooms. I am speculating that this may simply be because these procedures were tested on a US WiFi Xoom. Can somebody please confirm for me that it should be just as safe to update to rooted/Tiamat with a Canadian-purchased Xoom as it would be for a US one and that the instructions will be the same.
Thank you.
Gordon
Click to expand...
Click to collapse
Hi, since you flashed the US WIFI image, I think it is now, for all intents and purposes, a US Xoom. Root to your heart's content. You will love the Manta Ray Rom, and I use Dolphin HD browser most of the time, and I also use ADW Ex as my launcher. Scrolling between pages (I have 6 of them) is super smooth and the launcher bar is customizable and really handy. There are many really nice themes, too.
Thanks for the reply okantomi. You've added to my confidence to proceed! I think that I have seen that I might have to go back to HC 3.1 before rooting and proceeding to Tiamat, but I am not sure. Still researching.
Thanks again.
Gordon
[Edit] Just noticed the thread http://forum.xda-developers.com/showthread.php?t=1170774. I guess I can go straight from stock HC 3.2 to Tiamat.
Just yesterday I updated to 3.2 and flashed Tiamat 2.1 ROM and Tachi Kernel also. I am not able to access certain sites such as fb, xda, xoomforums ets. But youtube loads fine. This problem was present in 3.1 also. But it solved by itself. What is the issue?
Thanks in advance.
Honeycomb 3.2
Tiamat XOOM ROM 2.1 Hammerhead
Tiamat XOOM 2.1.0 "TACHI"
Connected over ad hoc wifi using Joikuspot on nokia 5800
Please correct me if I am wrong
Upon reading your request and reading about 2.1 Hammerhead and TACHI (url's are where I read) I am to believe that you have the 3g Model of the Motorola Xoom, and not the Wi-Fi only one.
Before you flashed the ROMs, when you were on STOCK, you were able to access the Web Pages and had this trouble before but it fixed itself.
Here is my list of questions to help us, help you!
Are you using the Browser that came with the tablet (Not Opera/Firefox/Dolphin/Etc)
~If no, then which broswer are you using?
~If yes, Have you tried to clear the browser history/cach/cookies?
~~I ask this because when I have lock up for downloads it is because of too much information being stored in one place...
When you use your Youtube function, are you going to WWW.Youtube.com, M.Youtbe.com, or the APK? Same with the other websites that you use too please
Are you in a 3g zone and have you not gone over your allotted package that you pay for through your carrier?
I hope we can help you fix this as soon as possible!
To ur query
Cranvis said:
Please correct me if I am wrong
Upon reading your request and reading about 2.1 Hammerhead and TACHI (url's are where I read) I am to believe that you have the 3g Model of the Motorola Xoom, and not the Wi-Fi only one.
Before you flashed the ROMs, when you were on STOCK, you were able to access the Web Pages and had this trouble before but it fixed itself.
Here is my list of questions to help us, help you!
Are you using the Browser that came with the tablet (Not Opera/Firefox/Dolphin/Etc)
~If no, then which broswer are you using?
~If yes, Have you tried to clear the browser history/cach/cookies?
~~I ask this because when I have lock up for downloads it is because of too much information being stored in one place...
When you use your Youtube function, are you going to WWW.Youtube.com, M.Youtbe.com, or the APK? Same with the other websites that you use too please
Are you in a 3g zone and have you not gone over your allotted package that you pay for through your carrier?
I hope we can help you fix this as soon as possible!
Click to expand...
Click to collapse
I used http://forum.xda-developers.com/forumdisplay.php?f=945 to update to 3.2. It says wifi only. Also since I connect to an ad hoc network which the stock HC doesn't support, I'm unable to check if my wifi is broken unless I go my friends home which has a wifi router.
That aside.
-I am using the stock browser. I tried Dolphin but the same problem persists.
-Tried clearing cache, cookies, history and even application data. Even force close, factory reset, reboot Nothing works.
-I navigate to www.youtube.com from the browser itself.
--> Normal apps can use the internet normally.
-I share the 3g from my phone and my plan hasn't run out
--> I tried uninstalling and installing Joikuspot, restarting the phone etc. Issue is not with the phone. Else why woud only a few pages load on my xoom but on my laptop it works fine.
PS- When this problem happened earlier I was on 3.1 with the team tiamats rom and kernel. The whole reason why I upgraded was hoping this problem would go away.
****************FRUSTRATED****************
Atuljohn said:
Just yesterday I updated to 3.2 and flashed Tiamat 2.1 ROM and Tachi Kernel also. I am not able to access certain sites such as fb, xda, xoomforums ets. But youtube loads fine. This problem was present in 3.1 also. But it solved by itself. What is the issue?
Click to expand...
Click to collapse
Hypothesis: XDA and other sites use advertising banners which might block loading while their content is loading: sometimes their servers are slow.
(I have this issue occasionally on my Xoom, but not on the same sites with my desktop/netbook because of adblock plus.)
o
Atuljohn said:
I used http://forum.xda-developers.com/forumdisplay.php?f=945 to update to 3.2. It says wifi only. Also since I connect to an ad hoc network which the stock HC doesn't support, I'm unable to check if my wifi is broken unless I go my friends home which has a wifi router.
That aside.
-I am using the stock browser. I tried Dolphin but the same problem persists.
-Tried clearing cache, cookies, history and even application data. Even force close, factory reset, reboot Nothing works.
-I navigate to www.youtube.com from the browser itself.
--> Normal apps can use the internet normally.
-I share the 3g from my phone and my plan hasn't run out
--> I tried uninstalling and installing Joikuspot, restarting the phone etc. Issue is not with the phone. Else why woud only a few pages load on my xoom but on my laptop it works fine.
PS- When this problem happened earlier I was on 3.1 with the team tiamats rom and kernel. The whole reason why I upgraded was hoping this problem would go away.
****************FRUSTRATED****************
Click to expand...
Click to collapse
Ok, you are using stock browser, which means that it is trying to load up pages as a ANDROID PHONE/TABLET which makes pages read funkly because they are not coded for mobile. (Examples of mobile pages are but not limited to - M.Google.com M.Facbeook.com www.53.mobi and so on...) I asked if you used Dolphin because it has a setting in the browser that allows you to change the Reader to emulate a desktop computer, a IPod Touch, an IPad, and so on. (Opera Browser Also allows you to do this.) I am actually talking to you on my Dolphin Browser at this current moment on the Desktop Setting!
There is a way to test to see if this is the problem with pages not being able to load in the Android version of the code reader on the Stock Browser (as Dolphin and Opera are just a slight copy and epic change of it.) Here is the list of steps --
Open Stock Browser
type in to Address Bar, without quotes -- "about:debug"
Go to Settings for the browser though the menu key (the drop down at the top right of the tablet)
Go To Debug On Settings (at the very bottom usually)
Go to UAString (Towards the Bottom) and when you open it, you will see Android, Desktop, Iphone, (or something close to this)
Select Desktop and back up to the main part of the browser (This will save the settings)
From there, go to www.facebook.com and if it does not change your url to m.facebook.com, you have sucessfully changed your browser to emulate a Desktop Browser *Please note, that if you are not wanting to do this, Please use the settings in Opera Browser or PDolphin, where they openly state this process in roughly 4 clicks in the settings!*
Please let us know if this helps and if it does, WALA keep the settings (or do what I do, get Dolphin/Opera/Firefox and make them the Desktop Broswers and then use the regular browserfor pages that I know are mobile!)
GOOD LUCK!
First off I have searched here and every other forum without a solution. They all seem to think this revolves around Flash, BUT I removed Flash off my Bionic and it still displays the pictures.
When surfing forums, if a user has the site host a picture, I receive a blue box with a white question mark inside it. If I click the question mark, what should be an enlarged picture is just a black box and the picture never loads, even if I wait 20 minutes.
My Xoom is stock (maybe that is the problem hehe)
I have tried the stock browser, Dolphin and Skyfire with the same results
Removed flash (11.1) and reinstalled it, no change
Factory reset, reloaded flash, no change
This happens on 3g and wifi
Popup blocker on or off makes no difference
Right now I have no other software but what is there from a factory reset and flash and still the same issue, blue box.
My Bionic and the Wife's Incredible both run Skyfire and display the pictures no problem, I mimicked those settings on my xoom still get the blue box.
I have included a screen shot of the Xoom but can't post a link for the example. It is not just one forum it is all forums.
Ok, I screwed up and put this in the X forum instead of the Xoom forum....if someone would be so kind to move it
So moved.
Surely I can't be the only one having this problem....
So in trying to figure out what is going on I unlocked the xoom and flashed a fresh stock image...still the same freaking problem.
I am ready to throw it out the window.
psrumors said:
Surely I can't be the only one having this problem....
So in trying to figure out what is going on I unlocked the xoom and flashed a fresh stock image...still the same freaking problem.
I am ready to throw it out the window.
Click to expand...
Click to collapse
Usually it means that the image/file is in a format your browser or plugins cannot read. Check you Google Browser settings, reset it back 2 default (if you can). Are you running an ad-blocker app by any chance? What Stock version are you running ICS?
When the html version of Google shows the question marks instead of all of the images, You can request "Desktop Site" (In the browser settings menu) and the images should display fine.
Mjamocha said:
Usually it means that the image/file is in a format your browser or plugins cannot read. Check you Google Browser settings, reset it back 2 default (if you can). Are you running an ad-blocker app by any chance?
When the html version of Google shows the question marks instead of all of the images, You can request desktop site (In the browser settings menu) and the images should display fine.
Click to expand...
Click to collapse
Browser is set to default settings and no ad-blocker.
I have looked at the site in desktop and droid settings only to have the same thing. My Bionic displays the images just fine.
I am really beginning to believe there is something corrupt with my Xoom.
psrumors said:
Browser is set to default settings and no ad-blocker.
I have looked at the site in desktop and droid settings only to have the same thing. My Bionic displays the images just fine.
I am really beginning to believe there is something corrupt with my Xoom.
Click to expand...
Click to collapse
that is just weird. Maybe your Browser.apk is corrupt. Can you view images in your Gmail? Since your bootloader is unlocked, go ahead and root your device install a dif ROM and see what happens. You can always go back to stock if need be to send your device in for repair. Sorry I could not be of much assistance.
Mjamocha said:
that is just weird. Maybe your Browser.apk is corrupt. Can you view images in your Gmail? Since your bootloader is unlocked, go ahead and root your device install a dif ROM and see what happens. You can always go back to stock if need be to send your device in for repair. Sorry I could not be of much assistance.
Click to expand...
Click to collapse
I can view pictures in Gmail and other mail no problem, this is the only problem I have...well that and the pptp VPN not working.
Just installed EOS 1.0.0...no change still cannot view the pictures from the OP