i am not that new to this scene, hacked lots of samsungs over the years,
the question is:
is there a bug that prevent this Phone from shutting down with cm11 found @ http://forum.xda-developers.com/showthread.php?t=2384015
or do i need to use a lower cm version or omni or vanir ???
Related
Edit: Attention: There was a mistake in the changelog: all m7 variants are not unified, only the GSM variants. And Samsung Galaxy Note 10.1 ( SCH-I925) will get official support from next week. Also, m7vzw will only get a weekly this time around. Sorry for the inconvenience.
Stable SlimKat 5.0 is building and will be available for supported devices soon! - Expect a huge load of small changes, and a huge amount of bugfixes. Also, gapps received a major update, so make sure to update them.
Visit www.slimroms.net for info and downloads.
Major key changes in SlimKat 5.0:
- Fixes to Slim Recents.
- Changes and fixes to Chamber of Secrets.
- General fixes across the rom
New Devices:
- HTC One M8 (Unified).
- Samsung Galaxy Note 8 (N5100, N5110, N5120).
- //Samsung Galaxy Note 10.1 ( SCH-I925)// - Sorry guys next week.
Unified devices:
- m7att, m7tmo and m7ul are now m7.
- jfltexx, jflteatt, jfltetmo, jfltespr, jfltevzn, jfltecan are now jflte.
- d2att, d2tmo, d2spr, d2vzn, d2usc, d2mtr are now d2lte.
Devices that don't get stable will get weekly (which will start soon):
G2 family
Hlte
M8
N51xx family
i925
galaxysmtd
i9100g
v500
xt92x
NOTE:
For dirty flashers: Before you flash, you MUST wipe your system manually. Gapps has received major rework, and this way you ensure that nothing old will be left. As usual read the changelog, install instructions and known issues.
Thank you do much for a new realise. The best is that I again have access to my sd card.
I am a noobie and this is my third ROM
I think it is just right
Kudos guys. Will test it for you
Sent from my GT-I9300 using XDA Free mobile app
Help flashing Slimrom build 5
Hi, newbie here I just rooted and flashed my phone to omni ROM experiencing battery drain problems. would like to flash slimkat build 5.
What happens if I wipe system along with dalvik and cache ? Does it affect the drivers in anyway?
Using twrp to flash. Also how is the battery life with slimkat on S3 i9300? Using a goo manager with a recovery image installed would like to remove that as well. I have a backup of stock so Do I really need a recovery image ?
Hello! Dear Developers And Seniors on this forum I want you all to guide me in updating my Samsung Galaxy Tab 2 7.0 (GT-P3100)(Indian Version- 3G, GSM, WIFI, 16 Gb) to Android Kitkat 4.4.x.
I know there are several ROM's regarding the same on this forum. But I am little bit confused as to choose which ROM?
My Current Firmware:
Samsung's Official 4.4.2 Firmware & the device is NOT ROOTED.
My Requirements:
1 - I want a "Complete Bug Free" Kitkat 4.4.x ROM for my device.
2- I want that ROM which includes all official features of Kitkat 4.4.x and in which all features of Kitkat 4.4.x works flawless.
3- I want that ROM with which my device wont get SLOW or HANGS/FREEZES or SHUTS OFF.
4- I want that ROM which has a little bit Samsung type looks (Optional Requirement).
My MAJOR Confusion:
1- I visited the Official CyanogenMod Website and saw that there is CM 11 made for Samsung Galaxy Tab 2 P 3100. The latest version there is "NIGHTLY 27-11-2014".
Now, I am confused about what is included in this CM11 Nightly 27-11-2014 version and what are the bugs inside it (Is it Totally Bug free and fulfills my above mentioned requirements or not).
2- Whether I should go for Official CM 11 Nightly 27-11-2014 Version or the ROM's listed on XDA Forum such as OMNIROM, SLIMKAT, CRDROID, DHOLLMEN,CARBON ROM?
3- What is the difference between Official CM 11 Nightly ROM Vs. OMNIROM, SLIMKAT, CRDROID, DHOLLMEN,CARBON ROM?
I request you all to answer my post soon so that I could be able to run the best Kitkat 4.4.x ROM on my device just like you.:
Try this: http://forum.xda-developers.com/showthread.php?t=2580426
The difference between the different ROMs available can be features, kernel, etc.
What OS are you running on your computer? Before you can install the ROM. you will have to install a custom recovery. This thread should in the Q&A section, so I will ask a moderator to move it there.
Don't be offended, but I'm stunned. Not with your ignorance, but how you ignore this community rules. You demand answers for questions, that are all already given on those subforums. I suppose you didn't even read sticked threads. Don't make me wrong, we are all here to help each other.
There's no such thing as super stable, full featured, bugs-free rom. Noone will also have time to write a book about differences between them. You want some answers, just read. All I can do is to give you a few suggestions, look for:
1. P3100 CM11 M11 snapshot (AndroidAndi)
2. Newest GAPPS (ie. Full modular)
3. Eventually OC kernel (AGNi, Dhollmen or Blackhawk)
Before even thinking about any customs, you need to know about:
1. Rooting / custom recoveries (ie. TWRP)
2. Flashing methods (Odin / CWM)
I can't write about all of this in one thread, it's pointless, all is here, just search.
If you want to know about differences between rooms than just look for first post in each thread dedicated to them. But you should start with Cyanogenmod, you can call it a 'base' for many other distributions. (This is not quite true, but it's another story).
____________________________________________
P3110 / I9300 / I9100 / NEXUS 5 / iPAD2
It is not working i want to root my p3100 n upgrade it to slimkat official
Sent from my GT-P3100 using XDA Free mobile app
Hello everyone! Because i was tired of lollipop performance and bugs on our phone, i decided to downgrade to cm11. I found this rom: http://forum.xda-developers.com/moto-g/development/rom-unofficial-cyanogenmod-11-t3216484 . But i cannot find a compatible kernel for it without losing wifi, so i have to deal with the screen flickering and subpar cpu management of the stock kernel. Can someone help me finding a kernel or making the newer ones work with wifi?
Have you tried the 4.4 Xperience kernel? Pretty sure, if I remember correctly, that I saw in another thread it doesn't break WiFi and had no screen flicker on L bootloaders.
I have tried the lollipop version of the kernel (XPerience29-falcon-kernel-test.zip) and it remains stuck at the bootanimation(no flickering though). The kitkat version(3.4.104-XPerience-18.zip) still has the flickering problem, it is outdated and has much weaker wifi than the stock kernel. The xperience kernel was my guess as well but the versions that work are pretty outdated.
I need it too, I want to use MultiROM with SlimLP as primary ROM and CM11 (latest build) as secondary ROM, but I can't make it work with Xperience kernel. I don't know which version I have to use.
It will be better if I could run stock KK as secondary rom but it's only a dream.
P.S: I am able to run CarbonROM KK as secondary (latest niropa's build), but I don't like it..there are some bugs
Hey, this is my first post so I hope it's in the right section.
I just installed a custom build of CM13 to my Galaxy Tab 4 and trebuchet is very unstable and randomly crashes (And getting support is near impossible seeing that the build was last updated in January...)
I also have a Galaxy S3 thats on the same android version but is on nightly builds of 13.
Would it work/solve any issues if I grabbed the trebuchet apk off of my S3 using root and throw/replace it on the Tab 4?
I have finally got a different charging cable for my galaxy tab 2 10.1 and now i can charge it and use it again. I have an old LineageOS installed but sense it has been removed from the website i am looking for a new custom rom to use. I want to use something around Kitkat. Any ideas?
I am using lineage 11, really good kitkat ROM. If you pick lineage 11 I would pick build 3 because the builds after that have broken root access.
Try SlimKat. Its based on 4.4.4 and it really runs like hell. Tried it after my weired problem got solved, but I prefere to use CM13, the latest build from andi34's github. It runs really stable and I really love the old CM logo, the LAOS13 is very unstable in daily use. My dad told me that a while ago...
The main reason why I prefere Android 6 instead of 7 is, because it supports many older XPOSED modules and apps like SetCPU does still work. :good:
CM is the one and only for me, big thanks to the dev's :highfive:
Anyway, here's the link for andi's "Slim" repo: https : / / andi34 . github . io / roms_tab2_slim . html
Remove spaces to use