Related
Accidentally wiped my sdcard after wiping my entire system while installing Virtuous 1.29
Is the only way to push a new zip with the ADB terminal?
I installed the HTC Sync drivers, do i need to install the Google ones as well?
Don't have a lot of time on a computer so links would be helpful, or else i would try and search.
1.18.12 said:
Accidentally wiped my sdcard after wiping my entire system while installing Virtuous 1.29
Is the only way to push a new zip with the ADB terminal?
I installed the HTC Sync drivers, do i need to install the Google ones as well?
Don't have a lot of time on a computer so links would be helpful, or else i would try and search.
Click to expand...
Click to collapse
I don't understand why you can't put a zip on your sd card.
Maybe I'm not completely understanding your predicament. Are you saying you don't have a functional phone due to something going wrong with the unity flash?
Was actually going to put my phone down and get on da puter to post links and help you out....ran outta time though, sorry man.
Try putting the rom on another sd card or taking the current one out of your phone and transferring the rom to the card via an sd card reader. That would be the easiest way. When wiping you can wipe cache, data/factory restore, dalvik cache in advanced, and you can also format system. Don't try doing anything else because you can end up in trouble like you are now. If you can transfer the files like I described it would be the easiest way for you.
Scott_S said:
I don't understand why you can't put a zip on your sd card.
Maybe I'm not completely understanding your predicament. Are you saying you don't have a functional phone due to something going wrong with the unity flash?
Click to expand...
Click to collapse
From what I understood, he was going to install the virtuous rom, but he was wiping everything first before install. Unfortunately, he also wiped his sd card and now he only has recovery with no rom or backups to flash and no operating system to go back to.
you can mount your phone with recovery.. or you can use an adapter... or as said above another sd card..
Mudknot is correct. I have mounted through recovery before but it was a long time ago. Maybe he or someone else could walk you through it. It was not hard to do.
mudknot2005 said:
you can mount your phone with recovery.. or you can use an adapter... or as said above another sd card..
Click to expand...
Click to collapse
Wolf_2 said:
Mudknot is correct. I have mounted through recovery before but it was a long time ago. Maybe he or someone else could walk you through it. It was not hard to do.
Click to expand...
Click to collapse
its quite easy to do so and very straight forward. from recovery:
mounts and storage
mount USB storage
pretty self explanatory
Pirateghost said:
its quite easy to do so and very straight forward. from recovery:
mounts and storage
mount USB storage
pretty self explanatory
Click to expand...
Click to collapse
thank you. i tried this last night and my phone wouldnt show up. and posted this topic.
tried it again this morning and it worked perfectly.
I got a new LG P999 (I think that's the G2X). I'm new to Android but I'm not sure if I should root/mod or not.
Is there really any significant benefits from modding (like speed or stability) or it's just to make your Android flashier?
Also, what mod would be best to go for? And if someone could link me to a beginner tutorial on how to mod (with simpler terminology; I only found some with terminology like NANDroid, clockwork recovery, etc... which I don't really understand), that would be much appreciated.
Hope someone can help, thanks!
kefloxin said:
I got a new LG P999 (I think that's the G2X). I'm new to Android but I'm not sure if I should root/mod or not.
Is there really any significant benefits from modding (like speed or stability) or it's just to make your Android flashier?
Also, what mod would be best to go for? And if someone could link me to a beginner tutorial on how to mod (with simpler terminology; I only found some with terminology like NANDroid, clockwork recovery, etc... which I don't really understand), that would be much appreciated.
Hope someone can help, thanks!
Click to expand...
Click to collapse
Well, rooting/modding gives you every benefit out there. Battery life, speed, options, features, the list goes on. Flashing ROM's is basically 99% the reason why people root or install a custom recovery on their phones. NANdroid, Clockwork MOD, etc are basically the basis and the stuff that you need to know about rooting. Since you're new I suggest you read a lot first and get to know what those terminologies are. ClockWork is a custom recovery that enables you to flash a custom ROM onto your phone.
Here is the G2x Bible. That's a reference guide to most, if not everything, that you need to know.
Here is the NVFlash method that you need to do to install Clockwork onto your G2x. You don't really need root for the G2x, just install Clockwork via that guide and you'll be good to go.
Remember: Read, read, and read.
Thanks for your reply! Those links helped me a lot. A few questions though:
1) If I don't have an external SD card, will I be able to put an external SD card without problems later? And can I re-flash for the external SD card support if desired?
2) Once I'm in the ClockworkMod Recovery, how do I put the ROM on my phone? (Flash is the correct terminology if I'm not mistaken).
3) Which ROM or mod should I go with? From the looks of it, a lot of people use CyanogenMod, but is there one that's most stable/fast?
Thanks again for your answer.
Here's another guide on NVFlashing.
These are my 3 favorite ROM's. And I'm sure most of the G2x people would agree as well.
Eagle's Blood: Based on LG's stock 2.3.3 Gingerbread.
Weapon G2x: Again, based on LG's stock 2.3.3 Gingerbread, but with Whitehawx's many tweaks and features.
And of course, CyanogenMOD 7 Nightlies: It's based on Google's AOSP, but the CM team has added in hundreds of tweaks that makes the user experience the best you can ever get on Android.
My favorite is CM but I suggest you try all 3 to see which one you like the best.
Yes, you can slip in an SD card after you've flashed if you want. Just follow the instructions carefully on how to NVFlash, there's even a YouTube video on how to do it.
Once you're in CWM, I suggest you do a NANDroid backup to backup your current ROM. Then do the following steps.
1. Wipe Data
2. Wipe Cache
3. Wipe Dalvik Cache (within Advanced)
4. Then go into mounts and format your /system
5. Then proceed to flashing your desired ROM.
Here's a quick video on how to flash a ROM.
But note; that video is how to flash a ROM on a myTouch 4G, just ignore the ROM's I showed in that video as it's for the MT4G. But the Clockwork MOD that you see there is just like the one for the G2x, except now the letters are blue. Do as I did in that video by wiping everything. Only thing I left out is formating /system since it wasn't needed on the MT4G. So don't forget to do that on your G2x.
Also, do you have Froyo or Gingerbread right now?
If you need any help with your g2x just drop me an email at [email protected]. I will be happy to help with any questions you may have.
Sent from the fastest g2x in the world
Thanks again for your awesome reply mackster248.
To answer your question, I'm currently running Froyo and I'm not actually with T-Mobile. I'm in Quebec with Videotron but I read it's the same phone. The phone model I have is LG P999DW.
I think I'll go with CM V7.1.0.1 as my first ROM (the nightlies may not be as stable as I want them to be). Do you think that would be an okay ROM as a first?
So just to confirm, this is what I will be doing as a whole process:
First, I will follow the NVFlashing guide which will allow me to use ClockworkMod Recovery. Next, I'll do a backup with NANDroid (which I assume is an option in CWM). Following that, I follow the wiping steps you listed (same as your video). Is that correct or am I missing something?
Thanks again!
EDIT: So I followed the NVFlash steps and it worked fine until I tried to boot in Recover by holding Vol Down + Power, but it doesn't seem to do anything... I can boot up the phone fine normally by holding the power button though. Is there a reason booting into recovery wouldn't work?
EDIT 2: Ah, nevermind. It works after I took out the battery and tried again.
EDIT 3: I haven't wiped my data yet in the recovery, but it seems I need an SD card so I can load the zip of the ROM I want. Is there a way to load the ROM from my computer or will I need to get an SD card first? Also, I would like to know if I should root as well? Does it make a difference? If not, why do people root before flashing?
Do you mind making a video of all the steps you did in exact order? also people root because most phones just use ROM manager to flash clockworkmod right from ROM Manger, but we are using NVFlash so we dont technically need it. Also new to the G2x, from (wind Mobile, i believe its the same one as the videotron P999-DW)
but im so scared to flash lol i had a vibrant i9000-m die on me before :3
Well, I can't make a video of what I did since I don't have a spare camera. All I did up until now is follow the NVFlashing guide to get ClockworkMod Recovery. It's not very hard to do actually.
I'm apparently supposed to wipe data, etc. now but I don't want to do that because steps later say that I need to flash from the SD card which I don't have. So I need to know now whether I need an SD card to flash a ROM on the phone? I've ordered an SD card which might take a while to get but after I get it, I also would like to know whether I need to root to flash? (since ROM manager says I need to root to use it, maybe I need to root to flash a ROM via CWM as well?)
I downloaded ROM manager and it says I need to root my phone for it to function. I also tried "Flash ClockworkMod Recovery" via the ROM manager which gives me an error as well.
So if someone could let me know whether 1) I can flash without an SD card and 2) whether I need to root to flash via CWM, that would be much appreciated. Thanks!
The newest version of CWM Recovery requires a physical SD to put the rom backups on. Go get yourself one. The smaller capacities are very inexpensive now, but it is nice to have a larger one if you can afford it. Each backup is very large, so a small card would run out of space quickly if you don't offload them to your computer or another storage medium. If you want to backup to the internal sd then install the older version (4.0.1.5) of CWM that support internal sd only, then you don't need a physical sd card. That is why TGA_Gunnman put that version back into his flasher.
With the latest CWM and a g2x and NO sd card, I was able to root, and flash roms. Just select the flash zip from internal SD option in CWM. I did not backup though.
hesher said:
With the latest CWM and a g2x and NO sd card, I was able to root, and flash roms. Just select the flash zip from internal SD option in CWM. I did not backup though.
Click to expand...
Click to collapse
Wouldn't the flash zip be deleted after you wipe the data, etc.?
Also, do I need to root for flash via CWM to work?
No just place it in the root.
kefloxin said:
Wouldn't the flash zip be deleted after you wipe the data, etc.?
Also, do I need to root for flash via CWM to work?
Click to expand...
Click to collapse
So you're saying that if I place the ROM on the root of the phone, it won't be deleted once I wipe data, wipe cache, wipe dalvik cache and format my /system?
I would just like to make sure as I don't want to be stuck without a phone until I get an SD card and no backup.
Thanks
kefloxin said:
So you're saying that if I place the ROM on the root of the phone, it won't be deleted once I wipe data, wipe cache, wipe dalvik cache and format my /system?
I would just like to make sure as I don't want to be stuck without a phone until I get an SD card and no backup.
Thanks
Click to expand...
Click to collapse
If you were factory resetting a Samsung the internal SD is also wiped; but thankfully, LG does not do that. When you do a factory reset on the P999 all it does is wipe the data and cache partitions. The internal sd is left alone. So yes you can place the zip package on the internal sd, reset and then flash it. It also doesn't have to be on the root. In CWM if you select install zip from sd card, you can then choose external or internal sd and navigate to any folder and zip file you want to flash. Have fun!
I was able to install the old CWM with internal SD card support and I used that to make a backup and flash the ROM successfully. Everything seems to be awesome so far except that I can't use USB mass storage from the O/S. I turn on USB mass storage and my computer doesn't detect it. The only way to make it work is going to CWM and mounting the USB. Anyone know how I would be able to make it work through the O/S again?
I also can't install Swype without an external SD card, but I'll have one soon so that's not a big worry.
Aside from those things, I think it's pretty cool.
Thanks to everyone who helped.
Have fun bud. No phone is perfect, but the G2x is pretty awesome.
Powered by a G2x
Yeah, it's awesome. But anyone know why USB mass storage doesn't show the removable drive on my computer? I have to go into CWM and mount it to make it work, but I would prefer to be able to do it via the O/S.
Thanks for all your help though guys, you guys are awesome
kefloxin said:
Yeah, it's awesome. But anyone know why USB mass storage doesn't show the removable drive on my computer? I have to go into CWM and mount it to make it work, but I would prefer to be able to do it via the O/S.
Thanks for all your help though guys, you guys are awesome
Click to expand...
Click to collapse
Install the LG Gingerbread drivers. Let me find a link.
Edit: I had the same problem as you, but this fixed that.
http://www.lg-phones.org/t-mobile-g2x-usb-driver.html
Powered by a G2x
It doesn't seem to work. I installed the drivers via the download link in the link you provided. Didn't work, then I tried to update following the instructions using the LG mobile support tool, and it still doesn't work either. (I've tried on 2 computers btw.)
I'm not sure why it only works via CWM, any other suggestions?
kefloxin said:
It doesn't seem to work. I installed the drivers via the download link in the link you provided. Didn't work, then I tried to update following the instructions using the LG mobile support tool, and it still doesn't work either. (I've tried on 2 computers btw.)
I'm not sure why it only works via CWM, any other suggestions?
Click to expand...
Click to collapse
Could be USB connection type is set wrong internally. See if there is some setting in CM7 for it. On a stock rom you can go into LG Hidden menu and set USB to automatic.
i unlocked my htc cha cha via htc dev and only set the main install location to memory card rather than the internal memory.now everytime the phone restarts i get force closes for most com.android apps(phone,people,settings,etc..)
any suggestions on how to fix this please?
thanks
Oh, you're using on of the custom ROMs then. Unfortunately you need to reset to factory data (from CWM), as long as you cannot access Settings.
Ahh bad idea, you have to be really really careful. I'd suggest rather than using Apps2SD, or setting it to SD like that, use Link2SD, your phone sees it as internal. It'll save you a lot of space.
But yeah, as Alex said, you'll have to reset using CWM.
custom rom?dont recall installing a custom rom neither do i have access to the root directory neither did i choose the external storage as my primary storage using apps2sd.i did it using adb devices via the java sdk
just to emphasize on something.i don't really know much of the "mod/developing" thingie..so am like a noobie
RockyAJ said:
custom rom?dont recall installing a custom rom neither do i have access to the root directory neither did i choose the external storage as my primary storage using apps2sd.i did it using adb devices via the java sdk
Click to expand...
Click to collapse
Awww man, why did you went through adb?
That takes a lot of experience and practice. Use LINK2SD/APP2SD apps from market, as stated above. Try the same command through adb once more and set memory to internal, afterwards reboot the device. See if that helps. Otherwise, factory reset data.
factory reset you mean using the volume down plus on button and factory reset?cause i did a reset but didn't help.and i saw a "tutorial" online for the adb and it worked but just lately the phone went loca
Alex C. said:
Oh, you're using on of the custom ROMs then. Unfortunately you need to reset to factory data (from CWM), as long as you cannot access Settings.
Click to expand...
Click to collapse
alex,now i am having the same problem again.i formatted the phone,and backed up everything.then i start getting these errors back.and they pop up once then second time applications/settings open.any suggestions?new ones?
I need some help, stupid me put the files i need to flash custom rom on my sd card and when i went to install the zip it was not there, its not my sd card at all. Is there anyway to get those files back on the internal storage instead of my sd card or is there a way to access the actual sd card in cwm? If not is there a way to do a factory reset back to the factory rom?
Lsjreadingpa said:
I need some help, stupid me put the files i need to flash custom rom on my sd card and when i went to install the zip it was not there, its not my sd card at all. Is there anyway to get those files back on the internal storage instead of my sd card or is there a way to access the actual sd card in cwm? If not is there a way to do a factory reset back to the factory rom?
Click to expand...
Click to collapse
Any help would be appreciated. I hate to know that at this point i have a $400 paperweight.
Don't panic, all hope is not yet lost and I don't think you've bricked your device. Can you describe in more detail the exact steps you took? When you say 'sdcard' do you mean your external SD card or the tablets' internal memory (its called /sdcard on the tablet, so its a bit confusing).
There is absolutely ways to recover your tablet assuming you took the proper precautions beforehand. Before I give an answer (assuming my knowledge is even correct) can you give more details of your setup? Which recovery do you have? Which ROM do you have installed? Is your bootloader unlocked? Are you rooted? All of these answers will give more information and will guide you to a better answer.
opethfan89 said:
Don't panic, all hope is not yet lost and I don't think you've bricked your device. Can you describe in more detail the exact steps you took? When you say 'sdcard' do you mean your external SD card or the tablets' internal memory (its called /sdcard on the tablet, so its a bit confusing).
There is absolutely ways to recover your tablet assuming you took the proper precautions beforehand. Before I give an answer (assuming my knowledge is even correct) can you give more details of your setup? Which recovery do you have? Which ROM do you have installed? Is your bootloader unlocked? Are you rooted? All of these answers will give more information and will guide you to a better answer.
Click to expand...
Click to collapse
This is what happened, today i unlocked, rooted and then installed CWM. I followed steps to format my device from this forum post http://forum.xda-developers.com/showthread.php?t=1750861. Like i said instead of putting the rom on my internal storage i put it on my external sd card. That is where we are at now.
Lsjreadingpa said:
This is what happened, today i unlocked, rooted and then installed CWM. I followed steps to format my device from this forum post http://forum.xda-developers.com/showthread.php?t=1750861. Like i said instead of putting the rom on my internal storage i put it on my external sd card. That is where we are at now.
Click to expand...
Click to collapse
OK so you're not bricked, you're not messed up at all. CWM doesn't support flashing from external SD cards, so all you need to do is move the files to the /(root) directory of your tablet. Are you still able to boot up the tablet normally? If so, connect it to your computer with the USB cable (assuming you've got the correct drivers installed, and ADB/fastboot both work) and just copy the files to the first directory you see when you double click "internal storage". This will be the root directory of your tablet. From there, you should be able to just boot into CWM and it will show your ROM there.
I'll be actively monitoring this thread so if you have any questions feel free to continue to post. I know how frustrating it is to post a question and not get an answer until days later.
*EDIT* ok so I just noticed one thing: you're trying to install the Hydro rom, correct? So you need to go back to STOCK using this guide. Then, re-install CWM, re-root your tablet, and then try to install the Hydro rom.
opethfan89 said:
OK so you're not bricked, you're not messed up at all. CWM doesn't support flashing from external SD cards, so all you need to do is move the files to the /(root) directory of your tablet. Are you still able to boot up the tablet normally? If so, connect it to your computer with the USB cable (assuming you've got the correct drivers installed, and ADB/fastboot both work) and just copy the files to the first directory you see when you double click "internal storage". This will be the root directory of your tablet. From there, you should be able to just boot into CWM and it will show your ROM there.
I'll be actively monitoring this thread so if you have any questions feel free to continue to post. I know how frustrating it is to post a question and not get an answer until days later.
*EDIT* ok so I just noticed one thing: you're trying to install the Hydro rom, correct? So you need to go back to STOCK using this guide. Then, re-install CWM, re-root your tablet, and then try to install the Hydro rom.
Click to expand...
Click to collapse
I can not boot past the asus logo. I seen how people were able to push a rom through fastboot and adb but i can not seem to get my device to be seen by my computer.
Lsjreadingpa said:
I can not boot past the asus logo. I seen how people were able to push a rom through fastboot and adb but i can not seem to get my device to be seen by my computer.
Click to expand...
Click to collapse
Then the next logical step will be to diagnose whether you have the drivers installed correctly. Do you have the Android SDK pack installed? It comes with some google drivers, and there is an aftermarket driver file that helps the computer recognize a larger variety of devices. Follow the steps in this thread to get those drivers working. If those don't work, try install the official Asus Pad suite drivers.
opethfan89 said:
Then the next logical step will be to diagnose whether you have the drivers installed correctly. Do you have the Android SDK pack installed? It comes with some google drivers, and there is an aftermarket driver file that helps the computer recognize a larger variety of devices. Follow the steps in this thread to get those drivers working. If those don't work, try install the official Asus Pad suite drivers.
Click to expand...
Click to collapse
Yes i have both installed actually.
Lsjreadingpa said:
Yes i have both installed actually.
Click to expand...
Click to collapse
Hmm, I'm running out of suggestions since I'm still learning all this stuff too. I guess since you can't get past the Asus screen it won't detect in the computer. So the next step I can suggest is to get fastboot mode working. Do this by powering your tablet off. To get into fastboot mode, press and hold the POWER & VOLUME DOWN buttons simultaneously. It'll show some words about booting into recovery, don't do that. Just wait for a few logos, then select the middle one (USB icon) with the VOLUME UP key. Connect your tablet to your computer and you should be recognized to allow you to push files over (I don't know what the syntax is for fastboot but I'm sure it won't be difficult to figure out)
opethfan89 said:
Hmm, I'm running out of suggestions since I'm still learning all this stuff too. I guess since you can't get past the Asus screen it won't detect in the computer. So the next step I can suggest is to get fastboot mode working. Do this by powering your tablet off. To get into fastboot mode, press and hold the POWER & VOLUME DOWN buttons simultaneously. It'll show some words about booting into recovery, don't do that. Just wait for a few logos, then select the middle one (USB icon) with the VOLUME UP key. Connect your tablet to your computer and you should be recognized to allow you to push files over (I don't know what the syntax is for fastboot but I'm sure it won't be difficult to figure out)
Click to expand...
Click to collapse
That's where im at right now, i got nothing here.
Lsjreadingpa said:
That's where im at right now, i got nothing here.
Click to expand...
Click to collapse
I'm going to try hooking my tablet up to another computer and see if i can get anywhere with it like that. I'm really starting to think this thing is fubared.
UPDATE Nothing worked on the laptop. Anyone else know of a way to get me out of this mess or am i screwed?
adb push any rom to the internal memory. if you can't do it in windows try a ubuntu live cd, you won't get errors in adb while using linux.
Sent from my ASUS Transformer Pad TF300T
atomicblue said:
adb push any rom to the internal memory. if you can't do it in windows try a ubuntu live cd, you won't get errors in adb while using linux.
Sent from my ASUS Transformer Pad TF300T
Click to expand...
Click to collapse
I don't have linux i have windows, how do i do that?
UPDATE:
Well i gave up trying to get this to work and luckily i was able to return my tablet to the store. I want to thank opethfan89 for doing what you could to help me. Lesson learned, i have to make sure i use the internal sd card! What got me confused is i rooted and installed a custom rom on my nook and with that you had to put everything on the external sd card. Now i know what not to do again lol.
Good thing you were able to return it. Although im pretty sure you could have used adb to push the files directly to your internal memory no problem.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
thatisandwas said:
Good thing you were able to return it. Although im pretty sure you could have used adb to push the files directly to your internal memory no problem.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
My device was not coming up under adb devices nor fastboot devices so im not sure what else could be done.
Lsjreadingpa said:
My device was not coming up under adb devices nor fastboot devices so im not sure what else could be done.
Click to expand...
Click to collapse
Like the poster above said, you could have used a Linux live CD, downloaded ADB for Linux, and used ADB under Linux.
EndlessDissent said:
Like the poster above said, you could have used a Linux live CD, downloaded ADB for Linux, and used ADB under Linux.
Click to expand...
Click to collapse
I will keep this in mind if something should happen again. This time i put a roms folder on my internal sdcard with the stock rom at the ready just incase.
Lsjreadingpa said:
I will keep this in mind if something should happen again. This time i put a roms folder on my internal sdcard with the stock rom at the ready just incase.
Click to expand...
Click to collapse
That's a good plan. When I flash a new ROM, I always make sure I have at least one known-working ROM and at least one nandroid backup just in case.
Also, just as an organization suggestion, name the ROM folder something like "1-ROMs" or "All ROMS" or something else at the beginning of the alphabet so it appears at the top of the list when you're choosing a zip to flash. I personally use "1-ROMs", "2-Kernels" and "3-Extras", so they're the first three folders listed (Extras is for Gapps, mods, other flashables). It saves a lot of scrolling time.
EndlessDissent said:
That's a good plan. When I flash a new ROM, I always make sure I have at least one known-working ROM and at least one nandroid backup just in case.
Also, just as an organization suggestion, name the ROM folder something like "1-ROMs" or "All ROMS" or something else at the beginning of the alphabet so it appears at the top of the list when you're choosing a zip to flash. I personally use "1-ROMs", "2-Kernels" and "3-Extras", so they're the first three folders listed (Extras is for Gapps, mods, other flashables). It saves a lot of scrolling time.
Click to expand...
Click to collapse
Im glad you got an exchange. I would be so upset if my tab was a 400 dollar brick
another brick
Lsjreadingpa said:
I don't have linux i have windows, how do i do that?
UPDATE:
Well i gave up trying to get this to work and luckily i was able to return my tablet to the store. I want to thank opethfan89 for doing what you could to help me. Lesson learned, i have to make sure i use the internal sd card! What got me confused is i rooted and installed a custom rom on my nook and with that you had to put everything on the external sd card. Now i know what not to do again lol.
Click to expand...
Click to collapse
You were able to return it?? Amazing attitude ASUS has over there. You weren't charged for repair at all?
I did a similar thing on workmate's tablet as he asked me to flash him custom os. I installed TWRP recovery successfully and copied firmware I wanted to install on internal SD. Then I wiped DATA. I thought it would wipe only user data, but it wiped also the root of my SD card with firmware. Before that I wiped system as well. So now I'm stuck at ASUS logo after power up.
I will try methods that were described in the thread by opethfan89 and atomicblue with adb push and Linux after I come back from vacation (14th this month). Hopefully I will be able to save the tablet. Otherwise it'll have to be sold for spare parts as ASUS quoted over 300 € (about $400) for repairs claiming the warranty is void (which I know) as I unlocked bootloader. They said they won't even try flashing it but they'll just replace motherboard as they never repair unlocked devices. I can't imagine car service refusing to change oil claiming they are concerned that owner might have abused it and they'd rather change whole engine instead.
My K1 has been stock rooted for awhile now, and this past weekend I decided to flash a rom on it. I downloaded everything and went into TWRP to start wiping per instructions.
In my haste I selected to wipe EVERYTHING! Internal, SD, cache- the whole works. Abbot the time the wipe finished, I thought "Oh no, I did not leave anything on there to give the tablet instructions!" No new ROM, no old one either.
I have left it in TWRP since Saturday, afraid to reboot it. I fear it will permanently brick because there isn't anything on there. It is still in TWRP, plugged in.
I tried using am OTG flash drive but TWRP does not see it. I took the SD card out & loaded the new ROM on it, but TWRP does not see it either.
I am using a Linux Mint terminal with ADB commands to do this. Sudo ADB devices sees it, shows the serial #, and says Recovery.
How do I get a ROM on this device and get it functional again? Can I reboot it? To bootloader, or to recovery again? What is my next step?
I am an amateur with Linux, so please, keep the commands simple!
Thank you!
Don't worry it's not broken. Just put your SD card in and mount it (click mount and check usb otg or sd card or whichever media you're using) and you should be able to see your media when you click install and expand devices.
You can also connect your tablet to your pc and simply drag and drop files into its internal storage, your linux pc should be able to see your shield if it's in twrp. Just open nemo (win+E) and place the files you want to flash. Just make sure if you're transfering files from linux to give it a few more minutes after transferimg before unmounting your tablet and starting to flash.
I LOVE YOU, MAN!!! I tried mounting (had not seen that in TWRP before) the SD card, but it still did not see it. I put the OTG drive back in and mounted, it saw it! I proceeded to flash the rom. I had a hard time installing gapps, I am going to reinstall it tomorrow.
Thank you, thank you, thank you for your help!
biknut1 said:
I LOVE YOU, MAN!!! I tried mounting (had not seen that in TWRP before) the SD card, but it still did not see it. I put the OTG drive back in and mounted, it saw it! I proceeded to flash the rom. I had a hard time installing gapps, I am going to reinstall it tomorrow.
Thank you, thank you, thank you for your help!
Click to expand...
Click to collapse
No problem
Make sure you've downloaded ARM and not ARM64 gapps for your android version (7.1.1 or 8.1 depending which ROM you use, you can find the version on the bottom of the first post).
I downloaded the link in the Rom post, but I will double check. Thanks again!
biknut1 said:
I decided to flash a rom on it. I downloaded everything and went into TWRP to start wiping per instructions.
In my haste I selected to wipe EVERYTHING! Internal, SD, cache- the whole works.
Click to expand...
Click to collapse
Maybe already lessons learned, but a couple points I often tell folks on these forums:
- The TWRP default WIPE option (which only wipes data, Dalvik and cache) says "this is the only wipe you need most of the time". It says that for good reason, and they mean it when they say that! This default works great for flashing ROMs. Some folks will swear by wiping "system" when flashing a ROM. But this is already done when you flash the ROM, so it really is redundant.
- The option to wipe other partitions (besides the default) is labeled "Advanced" and again, it is called that for good reason. My advice would be, to not wipe anything under this section, unless you know exactly what it is, and what the result will be. There are sometimes valid reasons to do so, such as you want to completely wipe internal storage, and start fresh (various ROMs and apps dump a lot of extraneous stuff there, that never gets cleaned up unless you do so by some manual means). But again, you need to be prepared, such as not having your backups or ROM (that you intend to flash) on the partitions you are about to wipe.
- If/when you do choose to use the Advanced wipe features, always double check (triple check, for that matter) what you are about to wipe. It is easy to click the wrong box, and there will not be any confirmation of what you are wiping once you swipe. It's easy (maybe too easy) to intend to wipe something harmless like cache, but accidentally tap SD card or internal storage.
@redpoint73- Believe it or not, I know that! I did want to wipe the SD Card, and the rest of the tablet, so i could get rid of everything old that was making it lag. Good thought, just not all at one time. Lesson learned!
Nothing was harmed, tablet is better, gained some Linux experience, so all around it was a win!