want blue colour status bar for my xperia ion lt28h, rooted phone.
sulthan_kkdi said:
want blue colour status bar for my xperia ion lt28h, rooted phone.
Click to expand...
Click to collapse
download the xposed framework, and the module rainbow bars.
Kobro said:
download the xposed framework, and the module rainbow bars.
Click to expand...
Click to collapse
I am new to Android... Can you please send me the link where can i found that status bar...
sulthan_kkdi said:
I am new to Android... Can you please send me the link where can i found that status bar...
Click to expand...
Click to collapse
ok, download attachments, install them. (first you might need to enable non market installs, google to see how) then restart phone. go into app xposed installer in the appdrawer, inside, make sure its installed properly otherwise follow on screen instructions to get it installed, thn go into downloads section, find rainbow bars, install it, activate by checking rainbow bars in modules list and rebooting, go into app raibow bars from the app drawer, use the boxes to change color, hit apply, save cahnnges, reboot, and voila!
DON'T FORGET TO HIT THANKS!
Related
You can now theme your LG G3 Status Bar with Xposed module App Android Theme Engine
What Can be themed :
Signal Bar Icons
Wifi Icons
Clock Color
Custom Text
Nav Bar Themes
And Many more to be added soon.
Check out the Detailed Review here
vishal11in said:
You can now theme your LG G3 Status Bar with Xposed module App Android Theme Engine
What Can be themed :
Signal Bar Icons
Wifi Icons
Clock Color
Custom Text
Nav Bar Themes
And Many more to be added soon.
Check out the Detailed Review here
Click to expand...
Click to collapse
Not working for me
jaythenut said:
Not working for me
Click to expand...
Click to collapse
Hope you did the work around if not do the following:
Make sure you have provided Su access to the module and its in active mode.
Uncheck the LG rom check box and do a system restard within the app from the top right corner.
Make sure while doing the same you have wifi enabled.
Once you see wifi themed then recheck the lg rom box and do a system ui restart.
Restart your phone. It should work now.
Though a fix for the work around has been made which will be there in next update as currently adding more theme options.
Doesn't work even with that method.
Version 6.0 Pre Release --- Test Version
Change Log: Please Note: Fresh install is need for this test version. So Please restart the phone after uninstall the old version and then fresh install.
Material UI
Tab slide View
Code fix for Icon themeing Samsung Phones
Code fix for LG
Working Navigation bar for lg with same theme in home, drawer and in app view. Please select the following option in order to achieve same navigation theme in all window.
settings>Front touch buttons>colour> Black then xposed module theme of your choice
We are working hard to make this module working for everyone hence we only request you to test it and leave your detailed comments of what you liked and what you would like us to change.
Please leave your phone model and android version details also.
Download
So I just gave the 12/28 version a shot and Xposed Installer crashes after boot. This is with an uninstall for the old version, reboot and install new. I also tried rebooting after the fresh install but got the same results.
Android 4.4.2
Sprint LG G3
LS990ZV6
Pierceye said:
So I just gave the 12/28 version a shot and Xposed Installer crashes after boot. This is with an uninstall for the old version, reboot and install new. I also tried rebooting after the fresh install but got the same results.
Android 4.4.2
Sprint LG G3
LS990ZV6
Click to expand...
Click to collapse
Ya that was due to experimental version 2.7. If you roll back to 2.6 your issue will be gone.
I recomend to uninstall this version and do a fresh install of version 6.0 above with lot of fix and features introduced.
For more clarification, i am just a post awat
Hi everyone, I am using Ml09 and I would like to have data connection to automatically turn to 2g only when I turn the screen off and back to 3g/2g when I unlock phone. I had that option on Note 2, but on my shiny new Mate 7 I could not find a way even though it's rooted, because all solutions need a working xposed. I don't have xposed installed because it screwed my theme and icons. Is there any other way to auto toggle 2g/3g or possibly a proper working xposed for our magnificent Mate 7?
No mate it isn't..
Enjoy your mate7 as it is..
Peace
Actually I found a solution: Xposed 2.6.1 works perfectly with Mate 7 without messing up themes. After installing it install Intelli3g and phone switches to low power consuming 2g network automatically when screen is turned off and back to 2g/3g/4g when you turn on the screen. This helps with rather poor standby time of Mate 7 (1.5% power hour).
Hour this helped anyone.
rade228 said:
Actually I found a solution: Xposed 2.6.1 works perfectly with Mate 7 without messing up themes. After installing it install Intelli3g and phone switches to low power consuming 2g network automatically when screen is turned off and back to 2g/3g/4g when you turn on the screen. This helps with rather poor standby time of Mate 7 (1.5% power hour).
Hour this helped anyone.
Click to expand...
Click to collapse
So is it defo NOT messing icons up ? that version ? all is intact ?
Throw us link...
Edit : it is crap it foks up system still !!! i cant even activate it i got msg in app that something is with my ROM and when I update framework it is still red after install and reboot.. crap
what version of mate7 u have?
Edit 2 : had to disable resources in settings tho... still phone behaves weirdly ... like there is signal but bars shows no bars ..
Don't install version from this forum and do not try to install 2.6.1 from within Xposed. Here is what you have to do:
1. Uninstall Xposed
2. Go to http://repo.xposed.info/module/de.robv.android.xposed.installer and choose 2.6.1 or just download this apk: http://dl-xda.xposed.info/modules/de.robv.android.xposed.installer_v32_de4f0d.apk
3. Enjoy
When I tried to install through Xposed it could not install, but this method works and it does not mess with themes (make sure to check - theme issue compatibility - or something like that in Xposed settings when you install it).
Cheers!
Simona Simmy said:
So is it defo NOT messing icons up ? that version ? all is intact ?
Throw us link...
Edit : it is crap it foks up system still !!! i cant even activate it i got msg in app that something is with my ROM and when I update framework it is still red after install and reboot.. crap
what version of mate7 u have?
Edit 2 : had to disable resources in settings tho... still phone behaves weirdly ... like there is signal but bars shows no bars ..
Click to expand...
Click to collapse
rade228 said:
Don't install version from this forum and do not try to install 2.6.1 from within Xposed. Here is what you have to do:
1. Uninstall Xposed
2. Go to http://repo.xposed.info/module/de.robv.android.xposed.installer and choose 2.6.1 or just download this apk: http://dl-xda.xposed.info/modules/de.robv.android.xposed.installer_v32_de4f0d.apk
3. Enjoy
When I tried to install through Xposed it could not install, but this method works and it does not mess with themes (make sure to check - theme issue compatibility - or something like that in Xposed settings when you install it).
Cheers!
Click to expand...
Click to collapse
I've got it up n runnin .. but gravitybox doesnt work is working for you?
Able to installed but with Resources subclass issue. Some modules is working but those theme related module like Flat style bar/tinted status bar youtube adaway is not working.
any solution to fix this subclass issue?
amenlo9 said:
Able to installed but with Resources subclass issue. Some modules is working but those theme related module like Flat style bar/tinted status bar youtube adaway is not working.
any solution to fix this subclass issue?
Click to expand...
Click to collapse
I don't think there will be solution.. I have one of those youtube and resolution 1080p setting works it stays on 1080p .. b4 it always went back to 480p..
Does App Settings work with this one?
rade228 said:
Don't install version from this forum and do not try to install 2.6.1 from within Xposed. Here is what you have to do:
1. Uninstall Xposed
2. Go to http://repo.xposed.info/module/de.robv.android.xposed.installer and choose 2.6.1 or just download this apk: http://dl-xda.xposed.info/modules/de.robv.android.xposed.installer_v32_de4f0d.apk
3. Enjoy
When I tried to install through Xposed it could not install, but this method works and it does not mess with themes (make sure to check - theme issue compatibility - or something like that in Xposed settings when you install it).
Cheers!
Click to expand...
Click to collapse
2g/4g switching
Hello!
I tryed your sugestions but i can't auto comute between 2g and 4g. I installed int3lli 2g, but my phone stay allways in 2g. In status bar it is showing 4g, but the real connection is 2g. Why?
Maybe try LeanDroid.
Get it from Google Play. Does have some root functions.
If you've used Android N-ify with Good Lock, you will have known that there's an annoying bug, that the Good Lock settings icon overlaps the alarm section when the Quick Settings is expanded.
This will fix that, and fix up a few things in Good Lock to match AOSP/Google Pixel visuals
Screenshots in attachments.
Should be supported on any Samsung device on a Touchwiz-based 6.0/6.0.1 Marshmallow ROM (7.0 Nougat or newer is unsupported, you can use this Substratum theme instead which makes your SystemUI more AOSP-like!)
Will update this modified Good Lock accordingly as Good Lock itself recieves updates as well.
Changelog
v2
IMPORTANT: you must go and follow this, even if you already installed the previous version, just this one time. Added proper install instructions in the OP, shouldn't have any issues with installing now (read below)
Removed charging/wireless charging water splash animations
Changed default lockscreen wallpaper to stock Google Pixel wallpaper
v1
Removed Good Lock settings icon in quick settings header, to not overlap alarm icon in Android N-ify's quick settings header (still clickable where it was to access Good Lock settings)
Changed auto brightness icon in quick settings header to AOSP style
Changed screenshot notification icon to AOSP style
Changed Good Lock app icon to AOSP Nougat's SystemUI icon
Install instructions
If you are using stock Good Lock, or if you are on the first release of the modified Good Lock, follow the instructions ahead. If you haven't installed any Good Lock, skip to Step 4. Otherwise, if you're on v2 or later of modified Good Lock, and are just updating, skip to Step 6
Disable Android N-ify and GravityBox in Xposed Installer, and reboot
Uninstall Good Lock normally from the app (optional: backup Good Lock data)
Go to /data/app/ in your favourite root file manager, and delete any "com.android.systemui-#" folders (# is substituted with a number)
Install stock Good Lock again
Flash the modified Good Lock zip in TWRP
Enable Android N-ify and GravityBox
Enjoy (optional: restore Good Lock data)
Download
Realy great, works a lot better. Thank you mate. :good:
Great work bro
It doesn't seem to get installed when I flash it, I tried with and without Good Lock installed but it had the same effect. S7 Flat on Superman Rom 1.19
DarkboyZX said:
It doesn't seem to get installed when I flash it, I tried with and without Good Lock installed but it had the same effect. S7 Flat on Superman Rom 1.19
Click to expand...
Click to collapse
Yes, the ZIP does not work if you try to flash it before installing GoodLock and N-ify. It is recommended that you wipe and reflash the system partition after uninstalling N-ify and GoodLock, and then install GoodLock and N-ify -> reboot once -> flash the ZIP through recovery.
New update!
v2
IMPORTANT: you must go and follow this, even if you already installed the previous version, just this one time. Added proper install instructions in the OP, shouldn't have any issues with installing now (read below)
Removed charging/wireless charging water splash animations
Changed default lockscreen wallpaper to stock Google Pixel wallpaper
DarkboyZX said:
It doesn't seem to get installed when I flash it, I tried with and without Good Lock installed but it had the same effect. S7 Flat on Superman Rom 1.19
Click to expand...
Click to collapse
Follow the new install instructions, it should work now.
Is it possible to for the QS panel to be bluish-greyish, like on AOSP?
Since right now, it is completely black.
moriel5 said:
Is it possible to for the QS panel to be bluish-greyish, like on AOSP?
Since right now, it is completely black.
Click to expand...
Click to collapse
Yes it is.
In Good Lock routines editor, on the section where you pick theme colours, you can try and pick the blue-greyish colour for the first hexagon to the left, then your QS panel background colour will be set accordingly.
OhayouBaka said:
Yes it is.
In Good Lock routines editor, on the section where you pick theme colours, you can try and pick the blue-greyish colour for the first hexagon to the left, then your QS panel background colour will be set accordingly.
Click to expand...
Click to collapse
Thanks, I haven't installed your modified Good Lock yet on my father's phone (I don't use TouchWiz, however I was unable for some reason to boot CM12.1 on his phone (when there will be enough time, I will try CM13, or whatever will exist then)) since I thought that the colors will be too jarring for him.
When I'll have time, I'll install your modified Good Lock on his phone.
Is there a way to get a gap between the notifications?
Done
Sent from my hero2lte using XDA Labs
..
Hello,
First of all, thanks for the mod! Developpers like you are great, and add something to the community! Thanks.
Getting to the question. I know it may sound stupid, but this is supposed to make Good Lock work with Android N-ify. But I don't know when I should instal android n-ify. Should I install Good Lock (fresh install), flash your GoodLock v2 zip, and then install Android N-ify module through Xposed? Or do I not need to install the Android N-ify module?
Thanks in advance for the clarification. Cheers!
CamilleBC said:
Hello,
First of all, thanks for the mod! Developpers like you are great, and add something to the community! Thanks.
Getting to the question. I know it may sound stupid, but this is supposed to make Good Lock work with Android N-ify. But I don't know when I should instal android n-ify. Should I install Good Lock (fresh install), flash your GoodLock v2 zip, and then install Android N-ify module through Xposed? Or do I not need to install the Android N-ify module?
Thanks in advance for the clarification. Cheers!
Click to expand...
Click to collapse
Yep, you install android n-ify and gravitybox after you flash the good lock zip.
OhayouBaka said:
Yep, you install android n-ify and gravitybox after you flash the good lock zip.
Click to expand...
Click to collapse
Well thanks for the answer.
I followed the procedure, installed Good Lock, then flashed your zip, then installed Android N-ify 0.2 and Gravity Box, but the navigation panel still looks like the original Good Lock panel (I don't see neither Android N-ify effect, nor your Good Lock).
Don't know what I did wrong, but too bad for me.
Thanks for the help anyway !
CamilleBC said:
Well thanks for the answer.
I followed the procedure, installed Good Lock, then flashed your zip, then installed Android N-ify 0.2 and Gravity Box, but the navigation panel still looks like the original Good Lock panel (I don't see neither Android N-ify effect, nor your Good Lock).
Don't know what I did wrong, but too bad for me.
Thanks for the help anyway !
Click to expand...
Click to collapse
N-ify 0.2 on the xposed repo is really old, you want the latest build from https://ci.paphonb.xyz/jenkins/job/AndroidN-ify/
Also if installing my good lock made no difference, manually copy out the base.apk from the zip into /data/app/com.android.systemui-1, give -rw-r-r permissions and reboot
OhayouBaka said:
N-ify 0.2 on the xposed repo is really old, you want the latest build from https://ci.paphonb.xyz/jenkins/job/AndroidN-ify/
Also if installing my good lock made no difference, manually copy out the base.apk from the zip into /data/app/com.android.systemui-1, give -rw-r-r permissions and reboot
Click to expand...
Click to collapse
I tried as well, but it seems I can't get Android N-ify to work on my S7 Edge. It probably isn't related to your mod.
Thanks for the help! :good:
CamilleBC said:
I tried as well, but it seems I can't get Android N-ify to work on my S7 Edge. It probably isn't related to your mod.
Thanks for the help! :good:
Click to expand...
Click to collapse
No problem
Scratch that. Think it's a bug with the version of N-ify I'm using nevermind!
CloudyxVision13 said:
Scratch that. Think it's a bug with the version of N-ify I'm using nevermind!
Click to expand...
Click to collapse
The same thing happens to me when I use the latest version of N-ify from jenkins. However it doesn't do the same with version 0.20 from xposed, but It doesn't look as good as the screenshots in the OP.
Hello Everyone,
I want to remove (Lockscreen- poweroff) icons from the notification panel.
phone: Lenovo A1000
Android:5.0
I have root +busybox +Xposed +Gravitybox
leprince2007 said:
Hello Everyone,
I want to remove (Lockscreen- poweroff) icons from the notification panel.
phone: Lenovo A1000
I have root +busybox +Xposed +Gravitybox
Click to expand...
Click to collapse
Is that the only page in your panel? Is there another page that you can swipe left or right? There should be an "edit" or "add" or "+" symbol in your panel somewhere? Or is there a setting in your system settings>notifications (or whatever the path to your notification settings in system settings).
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Is that the only page in your panel? Is there another page that you can swipe left or right? There should be an "edit" or "add" or "+" symbol in your panel somewhere? Or is there a setting in your system settings>notifications (or whatever the path to your notification settings in system settings).
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
I'm Android 5:0
There is no options in setting to do this.I can add more icons using gravitybox,but I cannot hide stock icons.
Isn't there any mod or Xposed module or app to do this??
leprince2007 said:
I'm Android 5:0
There is no options in setting to do this.I can add more icons using gravitybox,but I cannot hide stock icons.
Isn't there any mod or Xposed module or app to do this??
Click to expand...
Click to collapse
Try Android N-ify. Its an Xposed module that'll change your phone's UI to android N. It also gives you the option to edit your QS panel. So you can add and remove whatever tiles you like (once your ROM supports those tiles).
Its a bit buggy on Lollipop though. So you might run into crashes (of mainly the System UI).
Take a look at the thread over here:
https://forum.xda-developers.com/xposed/modules/xposed-android-n-ify-features-t3345091/page1578
Droidriven said:
Is that the only page in your panel? Is there another page that you can swipe left or right? There should be an "edit" or "add" or "+" symbol in your panel somewhere? Or is there a setting in your system settings>notifications (or whatever the path to your notification settings in system settings).
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Freewander10 said:
Try Android N-ify. Its an Xposed module that'll change your phone's UI to android N. It also gives you the option to edit your QS panel. So you can add and remove whatever tiles you like (once your ROM supports those tiles).
Its a bit buggy on Lollipop though. So you might run into crashes (of mainly the System UI).
Take a look at the thread over here:
https://forum.xda-developers.com/xposed/modules/xposed-android-n-ify-features-t3345091/page1578
Click to expand...
Click to collapse
I installed it before,it cannot be edited.And I flashed a new Rom now.
leprince2007 said:
I installed it before,it cannot be edited.And I flashed a new Rom now.
Click to expand...
Click to collapse
The stable version cannot be edited. However, the newer snapshot builds allow editing.
Freewander10 said:
The stable version cannot be edited. However, the newer snapshot builds allow editing.
Click to expand...
Click to collapse
Can you give me a link for it??and version No.?
leprince2007 said:
Can you give me a link for it??and version No.?
Click to expand...
Click to collapse
This is the link to the latest version
https://paphonb.xyz/sv2/jenkins/job.../app/tk.wasdennnoch.androidn_ify_Build827.apk
And this is the link to the build server:
https://paphonb.xyz/sv2/jenkins/job/AndroidN-ify/
Freewander10 said:
This is the link to the latest version
https://paphonb.xyz/sv2/jenkins/job...s://paphonb.xyz/sv2/jenkins/job/AndroidN-ify/
Click to expand...
Click to collapse
I installed it but after restart a message kept appearing :
Unfortunately ,Bluetooth has stopped
It kept appearing until I uninstalled it and rebooted.
What good version can I install without errors??
How to reset notification panel to its stock defaults??
leprince2007 said:
I installed it but after restart a message kept appearing :
Unfortunately ,Bluetooth has stopped
It kept appearing until I uninstalled it and rebooted.
What good version can I install without errors??
How to reset notification panel to its stock defaults??
Click to expand...
Click to collapse
There's no "good version" for all devices. The only way to find a compatible build for your phone is to go through them all
To reset the tiles, hit the pencil icon at the top right corner of the QS panel, then hit the 3 dot menu button. You'll see the option to reset.
Freewander10 said:
There's no "good version" for all devices. The only way to find a compatible build for your phone is to go through them all
To reset the tiles, hit the pencil icon at the top right corner of the QS panel, then hit the 3 dot menu button. You'll see the option to reset.
Click to expand...
Click to collapse
No.I want to reset my stock notification panel.It doesn't have a pencil icon.And I cannot modify anything in it.
I modified it using Gravitybox and the app added these 2 icons and I cannot remove them.Can I reset it using Gravitybox or any other app?
leprince2007 said:
No.I want to reset my stock notification panel.It doesn't have a pencil icon.And I cannot modify anything in it.
I modified it using Gravitybox and the app added these 2 icons and I cannot remove them.Can I reset it using Gravitybox or any other app?
Click to expand...
Click to collapse
Have you tried disabling/uninstalling GravityBox?
Freewander10 said:
Have you tried disabling/uninstalling GravityBox?
Click to expand...
Click to collapse
I tried to disable it now,but the icons number increased.New icons appeared so I enabled it again.
Since updating, 3 devices.. the options to customize status bar, text, dialer etc show nothing.. Tried changing regions.. nothing.. also all themes to download only show 3 pages, none show text etc.. anyone know a fix/workaround?
I saw a video on YouTube on how to use MIUI 10 themes on MIUI 11 (you have to be rooted btw).
Otherwise I guess we just have to wait for MIUI 11 compatible themes.
Ikr‽ so frustrating!!!
voredroid said:
Since updating, 3 devices.. the options to customize status bar, text, dialer etc show nothing.. Tried changing regions.. nothing.. also all themes to download only show 3 pages, none show text etc.. anyone know a fix/workaround?
Click to expand...
Click to collapse
Same here…& even the miui 11 compatible themes don't have those customization options either…I hate it!!! Wish I could downgrade back to 10!
I'm getting the same problem on my Poco F1. Any workaround yet guys? (factory reset won't fix as well)
Same issue on my Violet since I upgraded to miui 11
Same! I spend a day clicking on various themes link and applying tons of themes but none worked, then i realised that it was miui 11 causing the problem.
there is a magisk mod so that you can inject Miui 10 themes on MIUI 11 os.
and so far using this, i can say that the status bar and notification shade is changing according to theme selected.
Same problem here.
bluviper said:
there is a magisk mod so that you can inject Miui 10 themes on MIUI 11 os.
and so far using this, i can say that the status bar and notification shade is changing according to theme selected.
Click to expand...
Click to collapse
what is this magisk mode? can you share?
wewenk said:
what is this magisk mode? can you share?
Click to expand...
Click to collapse
i found it here
voredroid said:
Since updating, 3 devices.. the options to customize status bar, text, dialer etc show nothing.. Tried changing regions.. nothing.. also all themes to download only show 3 pages, none show text etc.. anyone know a fix/workaround?
Click to expand...
Click to collapse
Your phone must be root.
Go to root file explorer root/data/system, change permissions to 755.
It works for me.
Henokhy said:
Your phone must be root.
Go to root file explorer root/data/system, change permissions to 755.
It works for me.
Click to expand...
Click to collapse
Can you explain please.
What is 755?
Which file? Or folder?