Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
obo789 said:
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
Click to expand...
Click to collapse
Make sure you're file manager is set to show all/hidden files.
I use tiny Dane elec readers but any should work.
Make sure they are fat 32 format.
Does USB OTG work on cm9?
I can't get it to work with my nexus OTG adapter?
Thanks and sorry to hijack
Sent from my Galaxy Nexus using Tapatalk
jameslfc5 said:
Does USB OTG work on cm9?
I can't get it to work with my nexus OTG adapter?
Thanks and sorry to hijack
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Yes it works
You need correct y and OTG cable and appropriate power source.
I managed to get astro to show the files on an USB Key, but when plugging 2 diff Card readers, and an SD card (fat32), although one of the adapters shows a led, USB storage remains empty under Astro...
any ideas?
tx
I took a punt and bought another SD card reader from amazon and it worked!
In case anyone else is looking for the same thing it's called "Daffodil UCR03 Ultra Slim all-in-1 USB 2.0 Memory Card Reader" on amazon.co.uk. This reads my 8GB SDHC card fine. Cost me about £3.50.
Can't include a link as forum won't let me cos i'm a newbie.
Would this work with WebOS too? And does this need external power source such as a USB hub?
I'm a total noob at this and could use a for-dummies version of how to connect a USB SDHC card reader to the Touchpad (I only recently flashed CM9).
Specifically, I would appreciate if someone could point me towards the exact products I would need in order to set up a USB card reader for my TP. I assume that I will need (1) a USB card reader (such as the Daffodil product mentioned by obo789) and (2) a micro USB adapter of some sort so that I can connect the USB card reader to the TP (is this the "OTG Cable" mentioned)?
If so, is there a particular USB card reader and cable that people recommend?
Once I've obtained the necessary products, would I just D/L Astro File Manager from the App store? Would EZ File Manager also work?
Sorry for the noob questions. I searched this and other forums but could not find a definite answer.
All the details on how to connect are here - http://forum.xda-developers.com/showthread.php?t=1582771&highlight=otg
It just needed a 5 second search.
Thank you so much for the link. I kept searching for USB card readers and nothing came up (here and on other online forums). I didn't t think to search for USB OTG compatibility since, until last night, I had no idea what USB OTG meant.
Thank you again for your help and for pointing me in the right direction.
The two I got working were both double capped style, one cap for the SD card and another for the USB plug. One is branded Dane Elec IIRC and the other was a free promo item from Panasonic I got a while ago.
Anyone know where I can get a y cable in the UK?I've tried all sorts of searches on amazon.co.UK and eBay, annoyingly the ones linked from amazon.com won't ship to the UK
Sent from my cm_tenderloin using Tapatalk 2
4-in-1 OTG adapter may save cables.
obo789 said:
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
Click to expand...
Click to collapse
Hardware is one thing, I just purchased one of these 4-in-1 adapters linked in this thread: http://forum.xda-developers.com/showpost.php?p=31034220&postcount=35
But your issue may be software/OS related, also discussed in that thread: http://forum.xda-developers.com/showpost.php?p=30952816&postcount=34
or better yet: http://rootzwiki.com/topic/33033-otg-usb-insufficient-available-bus-toolthingy/#entry921673
IMHO: you need the USB unmout utility presented there. Try it if your USB flash drives ot USB SD card readers don't work. You might just have a "insufficeint bus power" response, which the utility can correct. I can now read all my camera & camcorder SD cards from a USB interface that failed prior.
obo789 said:
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
Click to expand...
Click to collapse
I'm planning to use: http://www.amazon.com/Samsung-Note-...ction-Kit/dp/B006MJZOMW/ref=pd_ecc_rvi_cart_2
In theory you can use your HP charger connected to it as power source.
sheedatali said:
Would this work with WebOS too? And does this need external power source such as a USB hub?
Click to expand...
Click to collapse
webOS needs some preware.
JOLiu said:
I'm a total noob at this and could use a for-dummies version of how to connect a USB SDHC card reader to the Touchpad (I only recently flashed CM9).
Specifically, I would appreciate if someone could point me towards the exact products I would need in order to set up a USB card reader for my TP. I assume that I will need (1) a USB card reader (such as the Daffodil product mentioned by obo789) and (2) a micro USB adapter of some sort so that I can connect the USB card reader to the TP (is this the "OTG Cable" mentioned)?
If so, is there a particular USB card reader and cable that people recommend?
Once I've obtained the necessary products, would I just D/L Astro File Manager from the App store? Would EZ File Manager also work?
Sorry for the noob questions. I searched this and other forums but could not find a definite answer.
Click to expand...
Click to collapse
I've never used EZ File Manager? ES FileExplorer is fine.
I needed this app too: http://rootzwiki.com/topic/33033-otg-usb-insufficient-available-bus-toolthingy/#entry921473
Nathanation said:
Anyone know where I can get a y cable in the UK?I've tried all sorts of searches on amazon.co.UK and eBay, annoyingly the ones linked from amazon.com won't ship to the UK
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Sorry cant post a link cos I'm still new
The one i bought off amazon is now out of stock but i found another, search for "dual input usb cable" bit pricey but looks like it should work...?
Good luck!
Micro USB OTG w/ power
Nathanation said:
Anyone know where I can get a y cable in the UK?I've tried all sorts of searches on amazon.co.UK and eBay, annoyingly the ones linked from amazon.com won't ship to the UK
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Perhaps this? The Chinese don't care where they ship to:
http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
ZedZardoz said:
Perhaps this? The Chinese don't care where they ship to:
http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Click to expand...
Click to collapse
That should work and would have a lot less cable clutter than the original set up. With that all you would need is any microUSB charger to power it. There is also one for sale that has a male USB connection for power instead of a female micro USB. With this it would be easier to hook to one of those portable USB chargers that use a full size USB port.
http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367
Thanks for the links, i was searching the wrong terms completely lol
Im hoping to use my otg stuff to read my canon 550d sd card and ive found and an app called DSLR controller which will hopefully let me use my touchpad as a remote viewer for my camera, i'll post a pic of my serup when everything arrives
Sent from my HTC EVO 3D X515m using Tapatalk 2
Response and Results
ZedZardoz said:
Perhaps this? http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Click to expand...
Click to collapse
This one would be used with the stock HP charger (to micro-female):good:
spunker88 said:
That should work and would have a lot less cable clutter than the original set up.
There is also one for sale that has a male USB connection for power instead of a female micro USB. With this it would be easier to hook to one of those portable USB chargers that use a full size USB port.
http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367
Click to expand...
Click to collapse
:good:
This one is best, as you say, for portable supplies with Std USB such as this one listed here :http://forum.xda-developers.com/showpost.php?p=24462102&postcount=1 <<< 2AA Battery Powered Portable USB Power Supply: http://www.amazon.com/gp/product/B003M9Z5F6
I'm using this, as I already have this solar rechargable soulution I use for my phone:
http://www.goalzero.com/shop/p/8/Guide-10-Battery-Pack/2:8/
Nathanation said:
Im hoping to use my otg stuff to read my canon 550d sd card and ive found and an app called DSLR controller which will hopefully let me use my touchpad as a remote viewer for my camera, i'll post a pic of my serup when everything arrives
Click to expand...
Click to collapse
I have a camera buff that wants to use that setup for DSLR, please return to post your configuration and results! :silly:
=== Review of Juiced Systems ACA adapter ===
I got this: http://www.amazon.com/Samsung-Multi-functional-Connection-Kit-Compatible/dp/B006MJZOMW
It appears to be a USB OTG ACA compliant device. Sadly it's for Galaxy Nexus Products and the full ACA compatibility doesn't appear to be implemented in hardware and/or software on the Touchpad with CM9.
1- It does function as OTG host port with the Micro usb from a charger powering the down stream devices. :good:
2- OTG to devices on USB/microSD/SD interfaces works well, but only one at a time for memory volumes (FAT32). Not sure if that's a software shortcoming.
3- Success with a wireless adapter for Logitec mouse/keyboard on USB. :good:
4- Haven't found an NTFS mount solution for Touchpad w/ CM9 nightly 0903.
5- It does connect to the Touchpad, but not with the HP folio case or any case as it's a close fit.
6- The ACA charging of the touchpad while hosting, or otherwise, sadly doesn't work as it was reported to function on SG2.
7- ACA indicator never lights up for charging or host.
Initial Result:
- At $20USD there are fewer cables, but full ACA charging doesn't work, which was my motivation to spend more.
- OTG to devices on USB/microSD/SD interfaces works well, but only one at a time for memory volumes FAT32.
- The physical connection seems a little weak to me. I almost feel like it could break off damaging the adapter, or worst, the micro USB interface.
Further tests:
- I want to check if the Wirless mouse/keyboard on USB can be used with a SD card in either slot.
- I'd also like to test of external HUB with devices further downstream such as self powered HDD and seperate USB Mice, Keyboards (for deskside use).
- Can anyone recommend a ICS compliant USB GPS & app?
Although this setup with: Touchpad, USB battery, Juice adapter, is simple and elegant, its pricy for features I'm not able to use (charging while host). I'm not impressed it will be rugged enough for field use.
Here is my recommended portable solution, which is also cheaper:
- HP Touchpad
- Battery soulution of choice <<< $4.25USD
- OTG host cable & power Y combo: http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367 <<< $6USD
- USB memory / flash drive of choice
(or other USB device that is ICS compatible with HP Touchpad)
:victory:
Will do
Im getting the camera tomorrow and the cables and adapter should arrive soon!
Sent from my HTC EVO 3D X515m using Tapatalk 2
Hey there folks, I was wondering if there was a special type of internal adapter to exist that would allow me to use 2, 64 GB micro sd cards in my phone. I'm looking for like a male micro sd card input-to-dual female micro sd card output adapter to connect to the female micro sd card input in the inside of my phone. It would use the same concept of the cable that is used to connect a desktop hard drive to the power source, then from the power source to the motherboard to make the drive primary or slave.... I think cuz I cant remember the name of that kind of cable?
Anyways, it would look kind of like this:
__________ _____
\_PHONE_/ __ \M-SD/
I I / \___/
I_I_______/
I _____
I____/M-SD\
\ ____ /
Sent from my S4 using Xda Premium.
Why not just get a wireless hard drive? I have one and it's awesome.
Interesting - what brand do you have?
I have the SanDisk 64 GB Micro SD Card. It's the Class 10, grey and red-colored one. Iv'e never had any issues with my card, I just want to be able to add another 64 GB card without having to lug around a hard drive. There was a guy who had a similar kind of cable adapter setup but it was a male micro sd card input-to-dual female (reguar-sized) sd card output and his S3 was able to recognize his total memory of 128 GB's. How expensive, how big in physical size, and how big in GB size are wireless HDD's these days??
Sent from my SGH-M919 using xda premium
They had something like that before, can't seem to find it, you can try to contact them.
The price isn't cheap nor expensive.
http://www.redtron.com/
you can also try this place.
http://dx.com/
The sandisk 128gb sd cards work with the s4, so this might be the easiest solution.
Yes, I realize the 128GB micro SD Card from SanDisk works with the Galaxy devices but I had initially asked the question way before the 128GB mSD came out this year. But still, if such a PCI type of card reader extender exists & it could let your galaxy device read (2) 128GB mSD cards.... WOW!
Sent from my SGH-M919 using xda premium
Ahh ha! I found it... kind of. It's basically this: http://www.aliexpress.com/item/2014...rd-Compact-Flash-CF-Card-Type/1889508912.html but has (2) strips coming off if it to tie into a set of dual micro SD TF adapters. This would allow you to input the male side of this adapter into the back of the phone/tablet, while you could potentially input (2) 128GB micro SD cards into each slot of the TF adapter. If I remember correctly, this guy's version years ago was similar to what I'm looking for but his had 2 TF slots each for 2 separate regular-sized SD cards and was able to read up to 128GB's or so with his. Im saying, take the same technology but add 2 TF adapters to input (2) 128GB micro SD cards instead and put the male end of the adapter into the female micro SD card slot into the back of the tablet/phone.
Sent from my SGH-M919 using xda premium
I bought a female USB to male micro USB adapter and I can plug a thumb drive into my phone. It works great for transferring files. Now I just need a splitter to power an external hard drive to see if my phone can read that too.
It also works with a wireless mouse and keyboard USB dongle.
Similar to this:
http://www.cablewholesale.com/products/usb-firewire/usb-2.0-cables/product-30u2-21100.php?utm_source=GoogleShopping&utm_medium=organic&gclid=Cj0KEQjwo82eBRCR1Yr2u-G-sK8BEiQAbrSjVKXXSZGmryevIlcw9Ba7QB4yBwXzpL_lsmo6hWFJ7D8aAiOt8P8HAQ
The only dual micro sd adapter I have ever seen was for the playstation portable. 2 cards into one memory stick adapter. I have used the full sd to micro sd with a 128gb card. Worked fine when formatted to fat 32.
Now that 128gb micro sdxc cards are availble, no need for that Macguyver stuff.
Now if you could find an microsd to otg cable adapter with multiple microsd slots, that would be a winner.
Yeah, now you're talking... with "the micro usb-to-multiple micro SD card slot!" Imagine if there was an OTG cable just like that with support for dual/triple micro SD cards each at 128GB's and that the OTG cable could read it on all Galaxy tablets & the S4 & S5's?! Ohhhh the insanity!! :what:
The iSheep would have heart-attacks!
I shall buy the first OTG triple micro SD card cable you make if you patent it and build it!
:thumbup::beer:
Sent from my SGH-M919 using xda premium
...or just get an OTG cable and format an external portable drive to Fat32 and duct tape it all together 2TB in the palm of your hand!
honestly, and thin film OTG ribbon cable with built in USB hub and multiple SD card slots should work it could be thin enough fold over and to be double sided taped to the exterior of your battery cover without being too obvious. this would add maybe 2-3mm overall in thickness. probably wouldn't be to durable though. maybe integrate it into a TPU cover/case to protect the thin cable...
but then we are starting to get ridiculous.
See, now you're getting somewhere with your "usb hub & multiple SD card slots" idea MadMan. I saw an OTG cable with dual female micro SD slots but it was too thick (like an inch thick) and had a super sticky/tacky tape on the back so one could attach it to the back of your phone or phone case. Just too bulky. Although, the Wifi idea is something to look into as well but I'm usually not in areas that have Wifi, thus the desire for more space without carrying around an external HDD.
I was looking for basically a male Micro SD Extension Cable (like you see below) with a ribbon type connection but has dual female Micro SD slots so it could fit between the back of the phone and front of the battery or back of phone and front of phone case... not for the extension cable to be put on the back side of the phone case.
Sent from my SGH-M919 using xda premium
Bumpins
Interesting
the psp adaptors work good but are very flimsy
Just get a dual interface flash drive, micro usb + usb PC storage. The sandisk ones are pretty cheap and go up to 128gb. Theyre really small too, dont stick out much on the phone. Plus the storage speeds are much faster than micro SD and all your files are on one storage. I use mine for screen recording games with no lag or stutter, whereas writing to the micro SD causes a lot of games to pause so the card can catch up. Easier transfer to PC or sharing with other USB readable devices too. Much more worth it than a dual micro SD port (though it sounds pretty awesome)
Ok, so ya'll can keep this post going but I have officially lost interest due to my S5 having caught fire last week! Due to the damages to the phone, being a very long-standing TMobile customer, and misinformation from a few folks.... I have now received a FREE upgrade to a Galaxy S8! So happy now! Now I'll just swap over my *still working, yet undamaged* 64 GB Micro SD Card but maybe get the 256 GB SanDisk Micro SD Card in the future just for the hell of it... cuz I can! :silly:
Here's a pic that I took with my burner phone of my S5 after it caught fire.
spicy_puerto_rican said:
Here's a pic that I took with my burner phone of my S5 after it caught fire.
Click to expand...
Click to collapse
And how in the hell did you manage that? :angel:
Would love to keep all mods/flashables on my 64GB micro SD Card. Any good USB OTGs where I can put in my own SD Card that I already own? Preferably one that plugs into your phone directly, with no wire. Thanks!!
Leef Access microSD Card Reader with microUSB 2.0 Connector for Android https://www.amazon.com/dp/B00J2D7R20/ref=cm_sw_r_awd_1Z40vbEZWXPWV
Have you tried the sandisk Bluetooth one? I have it and it works great no need to even plug it in to your phone
What kind of one-piece USB-C reader/adapter can be used to directly connected to the Mi Mix to use an external microSDXC 64Gb card as external storage to easily transfer files? I don't mean a cable that in one end is the connector that goes into the phone and then on the other end is a bulky adapter where the memory card needs to go in.. I mean a one piece, ultra small, all in one, one end is the usb-c connector and the other hand the mini slot where the memory.card goes in..
I actually don't even know if the Mix connectivity is USB2 or 3 but wondering what will work and is the fastest that once attached to the Mix just shows in a file manager Android app directly as external storage.
Thanks for the input or recommendation on a brand or model/s.. if such thing exists like for example Lexar makes for iPhone that is a 1/2" mini adapter, lightening port on one side and a back slot where the memory card goes in directly
I think you could try something like this.https://www.walmart.com/ip/Nekteck-...6447&wl11=online&wl12=483707996&wl13=&veh=sem
mdaigt said:
I think you could try something like this.https://www.walmart.com/ip/Nekteck-...6447&wl11=online&wl12=483707996&wl13=&veh=sem
Click to expand...
Click to collapse
Thanks for the info Will these be automatically recognized as external storage by the phone once plugged-in or are there any settings/tweaks that need get changed or activated for this to work as a plug-and-play storage?
Thanks again very much