Database Info

Terminal emulator for pc

Termnal emulator for PC​
using the terminal emulator on your PC easily and quickly
Interview *
no need ADB
appearance as terminal
easy to use
Compatible with all devices
Enjoy it​

[Q] Enter Tizen commands using Ubuntu 12.4 Terminal

I am not really a deveoper and not really that good with Linux or Android terminal commands, but I can do them when I need to. There are so many android apps that I rarely use terminal commands. Gear 2 on the other hand has recovery modes or custom ROMs that I am aware of. It uses the propritary app "Gear Manger", doesn't offer a whole lot of choices in customization. I am wondering what are the most minimal developer's tools that I would need enter Tizen commands to the kernel. I am hoping its possible to just use a terminal window on Ubuntu 12.4 perform it OTA. is it possible to use the terminal window to enter Tizen commands to my Samsung Gear2?

[APP]MTK ADB, Use ADB directly on your device

MTK ADB gets you a privileged shell at the push of a button, allowing you to run commands directly on your MediaTek device. Some might wonder if rooting hasn't already solved this. Firstly, root access is persisted by modifying system files. When the real binary gets substituted by that of the root app's, if the device is rebooted, the init daemon running as root runs the binary giving the app root. What's wrong with this? If you have “purist” tendencies, you probably would want your phone as stock as possible, or at least with your permission. Sadly, not only binaries are dumped. Extra temp files, logs and helper binaries too, that manually removing them is like dancing on floor of pins and a prick means a brick. Not only that, consider yourself blocked from updates. If you're unfortunate enough, an update could result in bricking your phone as the files supposed to be present had been changed. This is more common than you think. MTK ADB makes no changes to your files whatsoever. Also, there's the matter of security/privacy. Root apps tend to always do something in the background. Either sneaking in a new app, or phoning home with your private data, or both. MTK ADB doesn't steal your data. The Internet permission is for Telnet, etc. On some devices, MTK ADB can get root access (depending on manufacturer) while all devices can get shell access. You just have to check which yours belongs.
IMPORTANT
•Refresh before (and after) clicking Start to check ADB status.
•Supports all ADB functionality. Just run "adb <command>" eg "adb pull" (without quotes).
•The minimalist terminal is for those who haven't any. Feel free to use your regular terminal (I use Terminal IDE) and keyboard (Hacker's Keyboard is really good). Just run "adb shell" on it.
•You can connect to your device using another phone, PC, or anything with a terminal and in the same network by running "adb connect IP_address".
•If you get a " device offline" error, disable and enable USB debugging. Next time connect to the network before running the app.
http://www.youtube.com/watch?v=_bt8BVaDCf0
http://slaycode.WordPress.com

Bump

Proof:
http://forum.xda-developers.com/gen...iled-error-t3191150/post62611445#post62611445
More Proof:
http://forum.xda-developers.com/fire-phone/general/root-fire-phone-supersu-t3105546/page10

Proof:
http://forum.xda-developers.com/gen...iled-error-t3191150/post62611445#post62611445
More Proof:
http://forum.xda-developers.com/fire-phone/general/root-fire-phone-supersu-t3105546/page10

When I open the app it opens but it doesn't work when I enter the commands and moreover the app when I try to start the adb it says unsupported device
Am using infinix hot 4 pro running NOUGAT xos 2.2

LordFME said:
MTK ADB gets you a privileged shell at the push of a button, allowing you to run commands directly on your MediaTek device. Some might wonder if rooting hasn't already solved this. Firstly, root access is persisted by modifying system files. When the real binary gets substituted by that of the root app's, if the device is rebooted, the init daemon running as root runs the binary giving the app root. What's wrong with this? If you have “purist” tendencies, you probably would want your phone as stock as possible, or at least with your permission. Sadly, not only binaries are dumped. Extra temp files, logs and helper binaries too, that manually removing them is like dancing on floor of pins and a prick means a brick. Not only that, consider yourself blocked from updates. If you're unfortunate enough, an update could result in bricking your phone as the files supposed to be present had been changed. This is more common than you think. MTK ADB makes no changes to your files whatsoever. Also, there's the matter of security/privacy. Root apps tend to always do something in the background. Either sneaking in a new app, or phoning home with your private data, or both. MTK ADB doesn't steal your data. The Internet permission is for Telnet, etc. On some devices, MTK ADB can get root access (depending on manufacturer) while all devices can get shell access. You just have to check which yours belongs.
IMPORTANT
•Refresh before (and after) clicking Start to check ADB status.
•Supports all ADB functionality. Just run "adb <command>" eg "adb pull" (without quotes).
•The minimalist terminal is for those who haven't any. Feel free to use your regular terminal (I use Terminal IDE) and keyboard (Hacker's Keyboard is really good). Just run "adb shell" on it.
•You can connect to your device using another phone, PC, or anything with a terminal and in the same network by running "adb connect IP_address".
•If you get a " device offline" error, disable and enable USB debugging. Next time connect to the network before running the app.
http://slaycode.WordPress.com
Click to expand...
Click to collapse
Are you familiar with an APK that utilizes mtk_bypass to directly flash firmware to device.
I'm looking for an APK that basically does what sp flash tool does because I don't have a computer.

Trying to get monitor mode working with nexmon

I downloaded nexmon from the play store and I can't seem to enable monitor mode, I have the utils and framework installed. I'm using dirty unicorns ROM with Kali on top. I have been looking all over on how to use it. The github says to use adb shell and then enter a command but I'm trying to do mobile pen testing and don't want to be tangled to a PC. Can anyone tell me how its done ?

Have you tried using terminal emulator to run the commands?

wangdaning said:
Have you tried using terminal emulator to run the commands?
Click to expand...
Click to collapse
The correct command is nexutil -m1 right ? I tried both the kali terminal and the android terminal.

Hopefully someone else can come give some advice, I have no clue as I have never ran that set up. I was just thinking the only way to get adb commands without a pc is to use terminal emulator app.

Anyone ?

I too need help with this. From the reading I've done nexmon is supposed to work as a standalone for things like airodump-ng but it doesn't exactly define handshakes and what is happening. It uses the terms becons and frame, I don't understand how these translate and would prefer to enable monitoring on the CMD in Kali.
It seems the problem is that nexmon stores the files in Android bins and Kali CMD doesn't see these as it is a separate machine. How do you merge the files so Kali can recognize that nexmon has a way to monitor the wlan0.
Furthermore how do you get Kali CMD to kill the P2P0 network, it seems as though this might cause a problem once you get it to monitor and try to run airo commands

Is it possible to do adb operations from android phone itself, without a computer?

I have seen discussions online such as this:
https://stackoverflow.com/questions/12634280/what-is-a-adb-daemon
If I understand the answers give there correctly, whenever I use an adb command on my computer connected to a smartphone, the reason it does anything is because there is a background process adbd, the adb daemon, running on the smartphone. Everything I see on the computer screen when I issue an adb command is the result returned by the adbd daemon.
a) Is this correct? Is this how adb is supposed to work?
b) If it is correct, is there any way to programmatically enable/disable/re-enable the adbd process? Can I programmatically interact with adbd at all (either through Java or NDK)? Can I use adbd from the android phone itself and perform actions performed using adb, without using a computer?
I am hoping to do this on a non rooted device, but if not, any kind of device will do.

mahaju said:
I have seen discussions online such as this:
https://stackoverflow.com/questions/12634280/what-is-a-adb-daemon
If I understand the answers give there correctly, whenever I use an adb command on my computer connected to a smartphone, the reason it does anything is because there is a background process adbd, the adb daemon, running on the smartphone. Everything I see on the computer screen when I issue an adb command is the result returned by the adbd daemon.
a) Is this correct? Is this how adb is supposed to work?
b) If it is correct, is there any way to programmatically enable/disable/re-enable the adbd process? Can I programmatically interact with adbd at all (either through Java or NDK)? Can I use adbd from the android phone itself and perform actions performed using adb, without using a computer?
I am hoping to do this on a non rooted device, but if not, any kind of device will do.
Click to expand...
Click to collapse
Yes, but it requires having a rooted device and the terminal emulator app. Or you can install TWRP and use the terminal emulator that is built into TWRP.
Sent from my SM-S767VL using Tapatalk

reply to answer
Droidriven said:
Yes, but it requires having a rooted device and the terminal emulator app. Or you can install TWRP and use the terminal emulator that is built into TWRP.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
I have an old rooted samsung phone with android 4.2.2
Is there any sample code on how I can interact with the adbd daemon? In the terminal emulator if I type "adb shell" it says starting daemon but then it says device not found. how would I do some basic stuff (like take a screen shot using "adb shell screencap" for example? Can I interact with it programmatically from java or ndk?

mahaju said:
I have an old rooted samsung phone with android 4.2.2
Is there any sample code on how I can interact with the adbd daemon? In the terminal emulator if I type "adb shell" it says starting daemon but then it says device not found. how would I do some basic stuff (like take a screen shot using "adb shell screencap" for example? Can I interact with it programmatically from java or ndk?
Click to expand...
Click to collapse
When using terminal emulator, it uses the same commands as adb shell(not the standard adb), but you remove "adb shell" from the commands. For example, in terminal emulator, it is:
reboot recovery
Instead of:
adb reboot recovery
Or
adb shell reboot recovery
Also, before running your commands in terminal emulator, you need to use the su command by typing:
su (then press enter, grant the app superuser/root permissions)
Then you can run the rest of your commands.
Sent from my SM-S767VL using Tapatalk