Database Info

[Q] ViperOneS rom problem

First noted this is first time installing a custom rom. Long time lurker, first time problem!
HTC One S from Bell (Canada) Rooted/unlocked. CWM for Recovery.
Installed the from Zip in CWM. Cleared everything, went and flashed with fastboot for the boot. Everything looked good. Went back into CWM and cleared cache again.
Went to boot, hanging at htc screen but has the additional red text as well.
What did I miss ?
Thanks for any help or insight into this issue.

Is your phone s-off ... If not thm install 4ext recovery n flash the rom by enabling smart flash in 4ext recovery... Search for 4ext recovery n how to flash rom with s on ull b done
If I hve helped you press the thanks button ...
sent from HTC sensation

No idea what the above poster is on about but... My engrish isnt that good.
CWM is a crappy recovery for our phones. You should use TWRP instead.
But that doesnt seem to be the issue here. The issue you are describing is exactly what happens if boot.img isnt flashed through fastboot.
So, I suggest trying to flash it again through fastboot (fastboot flash boot boot.img).
If it still doesnt work after a couple of tries, change recovery to TWRP and start over from scratch (wipe everything, flash viper, flash boot.img).

Goatshocker said:
No idea what the above poster is on about but... My engrish isnt that good.
CWM is a crappy recovery for our phones. You should use TWRP instead.
But that doesnt seem to be the issue here. The issue you are describing is exactly what happens if boot.img isnt flashed through fastboot.
So, I suggest trying to flash it again through fastboot (fastboot flash boot boot.img).
If it still doesnt work after a couple of tries, change recovery to TWRP and start over from scratch (wipe everything, flash viper, flash boot.img).
Click to expand...
Click to collapse
Thanks so much, It worked. I was starting to stress out. Re-did the flash and BAM music happened. Just sitting at the HTC One screen now. I assume that takes a couple minutes.

Yeah. We dont have 4ext recovery yet for our phones. Only an old outdated version of clockwork, and of course a good updated version of TWRP. I havent used 4ext but have heard interesting things. I hear in the new year there will be some work on bringing it to HTC One S, although I dont know if it will have any features that arent already covered in TWRP.

AKToronto said:
Yeah. We dont have 4ext recovery yet for our phones. Only an old outdated version of clockwork, and of course a good updated version of TWRP. I havent used 4ext but have heard interesting things. I hear in the new year there will be some work on bringing it to HTC One S, although I dont know if it will have any features that arent already covered in TWRP.
Click to expand...
Click to collapse
Yeah im going to be switching over to TWRP. Sounds like its allot better to work with. I know with cwm you can't even mount usb storage, so you end up pushing files on using adb.

[Q] upgarde snaufu...

was running viperXL 3.2.5 and wiped and went to cm10.1 now i used goo manager to download xhata (sorry i butchered it) now i can only boot into spash screen and bootloader. i used fastboot to reflash twrp and still only boots to the custom spash... hboot 1.09 s-off..... im kinda lost here. should have syuck with viper, why screw with perfection.

What is xhata? Is it a rom?
I'm not sure we can install roms with Goo Manager on this phone.
If you installed a rom for the quad-core Tegra One X, your phone will not boot and you're lucky you didn't get a brick. You need to do a full wipe and reflash.

first off not a noob. it was the evita rom. i still have bootloader access and can get half way into recovery( spash screen then twrp spash...) then reboot into custom splash. it was the rom... http://forum.xda-developers.com/showthread.php?t=2075783 so if anyone has any ideas please help, just dont start with the usual u screwed up flashing roms i know better. and the odd part is after reflashing the recovery via fastboot i get Twrp spash before going back to the phone main splash and boot looping.... and yes im s-off

No need to be so defensive. If we don't know exactly what you flashed, all we can do is ask. Its not meant as an insult. But its always better to ask the seemingly "obvious" questions first, get them out of the way.
If there is a "usual thing" that gets mentioned, its because the mistake of flashing ROMs for the ENDEAVORU in fact happens so often. Downloading from GooManager is not a great idea either, and often a red flag that someone installed a ROM for the wrong version of the phone.
Did the phone operate properly when you were on CM10.1?
What version of TWRP, and what fastboot command did you use to flash it?

I asked the "usual" questions because:
-You have less than 100 posts. That's often a sign of someone who is new to this.
-You used a rom name I've never heard of, and suggested you weren't sure of the name yourself. That's usually a big red flag for someone who flashed some random rom they found via Google.
-You mentioned using Goo Manager. That's a non-standard method for this phone, and an awful lot of people have bricked their phones trying to flash roms through apps that aren't well-supported. CWM Touch was notorious for this when the One X first came out.
If you don't want people to assume things, you need to state them up front.
On topic: There appears to be a bug in the latest TWRP that causes issues for some people. Try rolling back to an earlier version.

iElvis said:
On topic: There appears to be a bug in the latest TWRP that causes issues for some people. Try rolling back to an earlier version.
Click to expand...
Click to collapse
Yeah, I saw that too, and why I asked the OP what version of TWRP.

i had problems with that rom on version 4.0.1 and 4.1.0 had alot of errors and trouble. i haven't tried 4.2.0 though, i have been having better luck with rom after clearing out recovery cache running "fastboot erase cache" and running only twrp 2.3.3.1.

i flashed the second to last release of twrp (latest gave mount issues), viper was running great, cm 10.1 avatar was running fine just didnt like how plain it was so i used goo manager to download hatkaXL and when the download finished i picked select and flash.. then the usual warning about flashing and it rebooted, hit spash screen where it still is hours later. i then tried manually boot into recovery, it hit the bootloader i selected recovery and it seemed to try and load. next step was back to fast boot and to reflash twrp (fastboot flash recovery recovery.img ) flashed 100% success and still wont boot into recovery just the bootloader, and i wasnt trying to get all defensive, i sent first post using the wifes phone and posted quick, had a guy hooking up my satellite at same time as phone crashed. has anyone tried the new version of cwm for the evita? maybe flashing that may get me back, i have roms and backups on the pc that i can seem to side load but never boot as well.

well after repeated flashing of recovery and (fastboot erase cache) it finally booted to recovery, now to see if my backup will load.

[Q] Can't Get Rom to Boot

I was able to get my wife's phone unlocked over the weekend. I threw twrp 2.5.0.0 on there and tried to flash cleanrom. The phone was on the newest bootloader, so I tried flashing the boot.img in fastboot. It just stays on the boot screen forever. I found that there may be issues with newer twrp versions so I tried installing 3 different older version of twrp and all were unresponsive to touch. I could press power once and the twrp lock screen would come up, but that was it. I put 2.5.0.0 back on and it became usable again. Unfortunately I'm not S-Off yet because it says you have to be rooted and my plan was to put CleanRom on and then S-Off. I've verified the MD5 of the ROM zip on the phone. When I am going through the rom install though, and I go through all the options and it starts to install, it literally takes a tenth of a second and says successful. Then when I go to reboot to bootloader, it asks me if i'm sure since i don't have an OS installed. I figured that's just because I haven't flashed the boot img yet, but I am used to rom installs taking a couple seconds on my One XL. I've tried installing the boot.img with Hasoon's all-in-one and it says successful. I've tried installing the bulletproof kernel both via zip format and the boot img and still nothing boots up. What else can I try guys? The wife goes out of town tomorrow morning and needs a working phone. Thanks for your help.
edit: i found the log of the cleanrom install which appears to show the install failing.

utdps said:
I was able to get my wife's phone unlocked over the weekend. I threw twrp 2.5.0.0 on there and tried to flash cleanrom. The phone was on the newest bootloader, so I tried flashing the boot.img in fastboot. It just stays on the boot screen forever. I found that there may be issues with newer twrp versions so I tried installing 3 different older version of twrp and all were unresponsive to touch. I could press power once and the twrp lock screen would come up, but that was it. I put 2.5.0.0 back on and it became usable again. Unfortunately I'm not S-Off yet because it says you have to be rooted and my plan was to put CleanRom on and then S-Off. I've verified the MD5 of the ROM zip on the phone. When I am going through the rom install though, and I go through all the options and it starts to install, it literally takes a tenth of a second and says successful. Then when I go to reboot to bootloader, it asks me if i'm sure since i don't have an OS installed. I figured that's just because I haven't flashed the boot img yet, but I am used to rom installs taking a couple seconds on my One XL. I've tried installing the boot.img with Hasoon's all-in-one and it says successful. I've tried installing the bulletproof kernel both via zip format and the boot img and still nothing boots up. What else can I try guys? The wife goes out of town tomorrow morning and needs a working phone. Thanks for your help.
edit: i found the log of the cleanrom install which appears to show the install failing.
Click to expand...
Click to collapse
Did you flash boot boot.img?

Crypto66 said:
Did you flash boot boot.img?
Click to expand...
Click to collapse
I've narrowed down the issue to the install of CleanROM failing. This may be to twrp 2.5.0.0 but as I've said, earlier versions such as 2.3.3.0 aren't responding to touch for some reason. I don't think 2.5.0.0 is my problem though. I can see it if it didn't wipe properly, but the install is failing due to I/O errors.
But yes, I have tried flashing boot.img. twrp tells me I don't have an os when I try to reboot though, so that's the issue.

Try going to the advanced tab and fix permissions.
Sorry for slow responses, I've got to wait 5 minutes in between posts.

Crypto66 said:
Try going to the advanced tab and fix permissions.
Sorry for slow responses, I've got to wait 5 minutes in between posts.
Click to expand...
Click to collapse
Fix permissions won't work without a rom installed. It fails. And from what I understand anyways, fixing permissions is mostly for apps anyways.

Problem solved. Everyone make sure to use TWRP 2.3.3.1 and only that exact version. Older has touchscreen problems and newer has install issues. Man, this stuff can be frustrating at times.

That's not exactly true. Older versions work just fine, I'm using version 2.2 and it has never failed me.
Older versions aren't working for you because you have a newer touchscreen firmware, you would need to downgrade your touchscreen firmware in order to have touch response. For the same reason, you would not be able to run aosp roms until downgrading. Just thought I'd clear that up.
Sent from my One XL using XDA Premium

[Q] xt926 CM10.2 Stuck on Boot Logo After 1st Reboot

xt926 with unlocked bootloader and can run 10.1 nightly from get.cm with no problem. However, when I install a 10.2 nightly - whether from get.cm, epinter, dhacker or skrilaz - even though the initial boot comes up clean, rebooting after the initial boot gets stuck on the boot logo.
I have tried different recovery images - cwm, twrp, oudhs - and different versions of each.
I have tried clean installs, full formats and dirty upgrades from 10.1.
I have tried multiple force boots from this state (power+vol up).
I have tried with and without the updated gapps and UPDATE-SuperSU-v1.51.zip.
Restoring from backup does not get past this hang. The only way out is to revert to stock (I use mattlegroff's DROID_RAZR_HD_Utility_1.21).
Does anyone have any idea how I might get past this or even get a log?

Only thing that fixed this for me was to flash back to stock 4.1.2, flash newest CWM touch recovery, then flash newest nightly, Gapps, and SU. Then, a popup comes up saying something about the ROM wants to flash your boot image, and asks if you'd like to fix this. I answered YES (fix) and been working since.

Any chance you could link where you got your recovery and SU?
Much appreciated.

Same issue here...
I've also tried everything listed above. I've done everything i can possibly think of to get cm 10.2 on my xt926. For some reason my phone just isn't making it after the first reboot. I've searched and found similar issues but none of the troubleshooting has been working for me. I hope to find a way around this. I need that 10.2!

Same issue here. Not just CM, every 4.3 based ROM I've tried has either failed to boot or failed to boot more than once (more often than not, they won't boot at all).
I've been at this for hours, but I've had no success so far. I'll let you know if I come up with anything.
EDIT:
Here's my setup:
After every try, I flash back to stock 4.1.2 with VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-2_VQW_CFC.xml. I've edited it so it doesn't flash the stock recovery and so it flashes a modified logo that doesn't show the bootloader warning. Partway through, I booted up and updated to the latest OTA, so I had to comment out the tz.mdm files as well. I was using TWRP 2.2.2.1, but I updated to 2.6.0.0 earlier.

GeorgeHahn said:
Same issue here. Not just CM, every 4.3 based ROM I've tried has either failed to boot or failed to boot more than once (more often than not, they won't boot at all).
I've been at this for hours, but I've had no success so far. I'll let you know if I come up with anything.
EDIT:
Here's my setup:
After every try, I flash back to stock 4.1.2 with VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-2_VQW_CFC.xml. I've edited it so it doesn't flash the stock recovery and so it flashes a modified logo that doesn't show the bootloader warning. Partway through, I booted up and updated to the latest OTA, so I had to comment out the tz.mdm files as well. I was using TWRP 2.2.2.1, but I updated to 2.6.0.0 earlier.
Click to expand...
Click to collapse
one of 2 things should fix this problem,
use cwm 6.0.3.5 from here or
go to recovery/mounts and storage and format the data-media line (i know it says sd card but its internal, do not format the external ed card line or you will loose data on it)
also i updated matts utiliity to the latest ota, so you dont have to take the ota just to get the baseband. its in the dev forum. i will be updating it to a newer version if you wait until later, with the newest recoveries.
edit, btw 2.6.0.0 is not the latest twrp although i recommend using cwm as some have had issues with twrp including me.

First off, the latest TWRP seems to have fixed the problems (for me, anyway). Second, you'll need to use the most up-to-date GAPPs when you flash. Also, a lot of people have noted that mounting sytem prior to doing their wipes has solved the reboot issues.

Thanks a ton for the help. Flashed latest CWM and bumped up to 4.4 and everything's working fine. I appreciate the help!

[Q] Can't change ROM, reboot loop

I can't change my current ROM, I'm running Baked with Android 4.2.2, I had TWRP 2.7.0.0 and now I upgraded to 2.8.0.1 with the same results.
I've tried with several ROMS, I do the steps for each rom carefully, making a backup before doing a full wipe, etc, and after the install, when I reboot, I get stucked on the loading screen, I don't even see the custom ROM logo, just the Asus logo.
After the boot loop, I enter again in recovery and recover the Baked backup, and it works again.
I'm really desperate because the Baked ROM don't run well, is very slugish, so for me an upgrade is mandatory.
I've tried with several custom ROMs, the last one I tried was KatKiss Lollipop.
Any help would be greatly appretiated

krusty_da said:
I can't change my current ROM, I'm running Baked with Android 4.2.2, I had TWRP 2.7.0.0 and now I upgraded to 2.8.0.1 with the same results.
I've tried with several ROMS, I do the steps for each rom carefully, making a backup before doing a full wipe, etc, and after the install, when I reboot, I get stucked on the loading screen, I don't even see the custom ROM logo, just the Asus logo.
After the boot loop, I enter again in recovery and recover the Baked backup, and it works again.
I'm really desperate because the Baked ROM don't run well, is very slugish, so for me an upgrade is mandatory.
I've tried with several custom ROMs, the last one I tried was KatKiss Lollipop.
Any help would be greatly appretiated
Click to expand...
Click to collapse
What is your bootloader version ?
Are you doing a full wipe before installing ?
Thx Josh

If you can adb to it then go for a full wipe and try...same thing happened to me going from stock 4.2 to katkiss 4.4.4..
Look for the post i just did in tims thread for 4.4.4.. its got the links to the post...
Remember. ..wipe 'misc' as it seems gremlins like to hide in there..
Worked for me...

lj50036 said:
What is your bootloader version ?
Are you doing a full wipe before installing ?
Thx Josh
Click to expand...
Click to collapse
My current bootloader is 10.6.1.15.3, and I'm doing a full wipe, I follow carefully the instructions every time.
dgcruzing said:
If you can adb to it then go for a full wipe and try...same thing happened to me going from stock 4.2 to katkiss 4.4.4..
Look for the post i just did in tims thread for 4.4.4.. its got the links to the post...
Remember. ..wipe 'misc' as it seems gremlins like to hide in there..
Worked for me...
Click to expand...
Click to collapse
I installed ADB on my pc (win8 x64), and started to do the blob backup mentioned on the first link in your other post, followed all the instrucions, after the "Step 1" in the "Wheelie" menú, the tablet shuts of, as it should, but when I turn it on again, it no longer boots into android, it gets stuck in a boot loop, now I don't have TWRP anymore, I have the FlatLine CWM, so I can't recover the image created with TWRP, so I'm stuck with recovery,
I'm still trying to fix it, I'll try to revert to stock and start from there.
Thanks to the both of you, wish me luck!

krusty_da said:
My current bootloader is 10.6.1.15.3, and I'm doing a full wipe, I follow carefully the instructions every time.
Thanks to the both of you, wish me luck!
Click to expand...
Click to collapse
That is the issue mate you need to be on the bootloader ending with 27.5 ....... :good:
Let me know if you need any help making that happen .....
Thx Josh

krusty_da said:
My current bootloader is 10.6.1.15.3, and I'm doing a full wipe, I follow carefully the instructions every time.
I installed ADB on my pc (win8 x64), and started to do the blob backup mentioned on the first link in your other post, followed all the instrucions, after the "Step 1" in the "Wheelie" menú, the tablet shuts of, as it should, but when I turn it on again, it no longer boots into android, it gets stuck in a boot loop, now I don't have TWRP anymore, I have the FlatLine CWM, so I can't recover the image created with TWRP, so I'm stuck with recovery,
I'm still trying to fix it, I'll try to revert to stock and start from there.
Thanks to the both of you, wish me luck!
Click to expand...
Click to collapse
Yes, dont worry too much as I was in the same boat.. lost the recovery a few times.. and or couldn't get recovery to mount any partitions..
If you have still got ADB connection then use Busters wipe... multiple times.. as it cleaned mine out..
Then I used the easyflasher to flash the CWM kitkat Version and used this to flash Tims Kitkat off the external SDcard..
booted in to Kitkat with out loading Gapps.. let it settle then booted in to the recovery then booted to Bootloader..
and reflashed TWRP 2.8.. flashed Gapps with this and its all settled in..
One thing that I made sure off was to boot the device after flashing a recovery.. somewhere in all the instructions it says to to this.. So I made sure I did it..
otherwise I kept getting that password screen in TWRP...and if i got that then I knew it was not mounting anything..
K.. keep at it.. if there is will there is a way and as said if you have an unlocked bootloader and ADB you are half way there already..
Good luck..

lj50036 said:
That is the issue mate you need to be on the bootloader ending with 27.5 ....... :good:
Let me know if you need any help making that happen .....
Thx Josh
Click to expand...
Click to collapse
Thanks! I'm loading Lollipop for the fisrt time now!
I found a tutorial here to change the bootloader:
http://forum.xda-developers.com/showthread.php?t=2187982
And downloaded the latest firmware from here:
http://www.service.asus.com/#!downloads/c1wax
Thanks again