I have the stock 'v10c' ROM on a 'Rogers' LG Optimus 3D.
This morning I was using the Google+ Android client and - without closing the app - pushed the power button to put the phone to sleep and put it in my pocket.
About 15 mins later I pulled the phone out of my pocket and it was dark, but the touch countrols were all lit up. I know that usually isn't good news. The phone was unresponsive.
I pulled the battery and tried to re-boot. It gets to the Rogers screen and then boot-loops, with a flash of the Rogers screen each time it restarts a cycle. Roughly 15 seconds apart.
I did vol+down+Power (guessing based on other phones) and it booted into a recovery (3e) menu that only offered me the chance to wipe all user data. Ok. I moved the cursor down using vol+down and sletected "yes" with Home. The phone then presented a triangle logo and the green android and sat there.
Meanwhile...I Googled. After about 10 mins I pulled the battery again and did the Vol+down+3D button+Power boot to the REAL recovery menu.
I then did a wipe / factory reset from the recovery menu. I have assumed the Home button is the enter button (BTW).
Again the triangle and the green android appear. They are still there 10 mins later.
Not sure what to do now...the phone won't boot and the factory reset won't fix it. But it isn't dead. I can still get to recovery, so in theory this is fixable. I just don't have time for it right now. :-/
I was wondering if maybe the phone had updated OTA in my pocket and I didn't realise it and I may have messed up the process. But I have never seen a phone do an OTA update without first notifying the user and seeking confirmation...so I that probably isn't the case.
Very annoying.
I'm posting this here in case anyone else has the same experience.
Anyone have any advice?
[Update: The Menu button is the enter button...not Home. So I did a real factory reset and the phone now boots to the "Welcome to your new phone" screen. *WHEW!*]
Uhmm... if Menu button is home button that means u have problem with build.prop. I never met with this kind of problem, however I think u just should turn on usb mode in cwm, put a ROM on phone, flash it and see how this will be. Don't forget to backup ur rom.
Sent from my LG-P920 using XDA Premium App
Hi there,
I've got the same problem with my LG P920.
Then I read your thread and now I can tell you how to fix...
The recovery is the right way to fix, but the homebutton is not the menu button.
You have use the Options Button the first from the left side or the 3d-button.
Than you came to factory default and you can restart youre device.
best regreads
Morphix
Anyone know the glitch that is causing this?
Sent from my LG-P925 using xda premium
If've got the boot-loop for the first time and it happend after a reboot comand on the comand app...
I have the same problem and no idea why it happens ..
I had this 2 times in one week! very anoying..
dropped my tf101. Now when I try to boot the katkiss revolving circles dont stop going round and round. I am able to get into twrp though.I am aunable to restore because I never did a backup. Also I was getting red artifacts all over the screen. I would lightly tap the underside of tf101 and it would make the colors change dramatically on the screen and show red lines going across the screen. after tapping the tablet a couple more times the display colors are normal again but it still wont boot. What can I try?
leif2 said:
dropped my tf101. Now when I try to boot the katkiss revolving circles dont stop going round and round. I am able to get into twrp though.I am aunable to restore because I never did a backup. Also I was getting red artifacts all over the screen. I would lightly tap the underside of tf101 and it would make the colors change dramatically on the screen and show red lines going across the screen. after tapping the tablet a couple more times the display colors are normal again but it still wont boot. What can I try?
Click to expand...
Click to collapse
If you can get into TWRP you need to download the latest Rom and Gapps to a PC and install them onto your sd card) assuming you have one - if you don't ? my advice is get one (or two or three). Put sd card back into tf101 - boot to TWRP and then wipe all (see page one of the KatKiss 4.3 developers topic on this for exact wipes - oops just took this from Timduru's page
Go to recovery
Make a full wipe / factory reset (you can skip this step if you're already on KatKiss-4.3, if ever you encounter a problem do the full wipe and try again before reporting )
Format /system
Flash the rom
Flash optional kernel
Flash gapps
Wipe cache/dalvik
Reboot
As to the flashing of the screen - the fall could have done something to the video drivers hardware (but fingers crossed)
Good luck
Ziggy
after putting in my micro sd card i saw there was a back-up on it. I was able to restore from it and boot successfully. However my colors were off. . shaking/flexing/jolting the tf101 results in things like the whole screen turning blue green with lines across it. I'm not seeing any red lines anymore and now the olor red is missing all together. This makes white look blue and red look black. I was able to confirm HDMI out to tv still produces image/colors correctly. I'm afraid hitting tablet anymore won't bring red back and kill image entirely. Now since its fall yesterday a light tap on TF screen results in screen to go dark momentarily. Any chance this can be opened to fix missing red? Another problem since fall is vol down button is not functioning right. Seems like its stuck depressed. Is the vol down button necessary for advanced options?
Everytime I reboot I get bootloader white text in the top left of screen thats only supposed to show when vol down is pressed. Then the next screen says press down -vol for wipe option but I it doesnt move when i press vol- ( however I think I can actually initiate a vol- button by flexing the pad. Sounds strange right? Anyway I gues that means I can pick the wipe data option from that screen if i have to. after that select android/ data wipe screen I notice now every time I boot up in bottom left it says "SAFE MODE", what does that mean?
Your VOL buttons are stuck down. I am not excactly sure how to boot to safe mode, but it is due to one of the VOL buttons being pressed during the boot up process.
I would suggest taking the bezel off and trying to carefully bend it so the buttons move freely. I wrote a guide for it here: http://www.transformerforums.com/fo.../10501-rs-guide-power-lock-button-issues.html
I was able to unstick vol-, but after hitting tab a few more times trying to get red back, now there is nothing on display. I confirm hdmi output is still working. Anyone service these? Otherwise i guess i get a bluetooth keyboard/mouse and use as desktop PC?
Something i can fix myself by opening?
leif2 said:
Something i can fix myself by opening?
Click to expand...
Click to collapse
Most likely it is a loose video or backlight cable. Open it up and take the bezel off per the guide I posted. Then remove the back cover. There is one screw on each corner and then 3 on to and 3 on the bottom between the screen and back cover. The video and backlight cables are in the middle near the charging port. Make sure they are properly seated. Power it on reassembled to see if it works.
frederuco said:
Most likely it is a loose video or backlight cable. Open it up and take the bezel off per the guide I posted. Then remove the back cover. There is one screw on each corner and then 3 on to and 3 on the bottom between the screen and back cover. The video and backlight cables are in the middle near the charging port. Make sure they are properly seated. Power it on reassembled to see if it works.
Click to expand...
Click to collapse
I can tell you that when i press power rhe screen does light up. Its just grey screen. Does that mean back lighting isnt the problem and im wasting my time opening tab?
leif2 said:
I can tell you that when i press power rhe screen does light up. Its just grey screen. Does that mean back lighting isnt the problem and im wasting my time opening tab?
Click to expand...
Click to collapse
That means the video cable is loose or that the video card is bad. Since it works via HDMI, it should be a loose video cable. The video and backlight are separate cables.
I tvook the case off. Im not sure what to do. Ive got some basic colors on pad display again but it wont boot. Circles still spinning. I cant ssem to enter twrp either. I tried holding vol down power ro reboot and i quickly see green label on bottom of screen and then goes dark. Would twrp be visable from hdmi out?
frederuco said:
Most likely it is a loose video or backlight cable. Open it up and take the bezel off per the guide I posted. Then remove the back cover. There is one screw on each corner and then 3 on to and 3 on the bottom between the screen and back cover. The video and backlight cables are in the middle near the charging port. Make sure they are properly seated. Power it on reassembled to see if it works.
Click to expand...
Click to collapse
Here are some pics I took on the bottom side by charger. what should i reseat. Nothing seems movable .can you tell me how i can get into twrp since i currently can't boot. I tried holding vol - and power but i didn't see opption to hit vol +. I tried to hit vol + anyway but i just got a grey screen. I tried holding power vol+ for 10 secs. to cold boot. still just spinning katkiss circles. Do i need to get into APX mode (hold VOL UP and POWER for about 10 seconds and use EasyFlasher to re-flash TWRP?
Bumping thread
What button combos can i try to get back into twrp since i currently cant boot or enter recovery? Is it the multi color wire ribben that i should be adjusting?
leif2 said:
Bumping thread
What button combos can i try to get back into twrp since i currently cant boot or enter recovery? Is it the multi color wire ribben that i should be adjusting?
Click to expand...
Click to collapse
I believe this is the display cable that tends to come loose after being dropped, if not that one, a similar coloured and positioned cable, I did have a video showing the exact procedure but can't find it atm
EDIT - Found it
http://youtu.be/yRLcxI2JddQ?t=6m6s
thanks for the vid. I was able to get display working again including red so this will work even if the problem is your display stops showing all colors and starts showing lines and other artifacts. It seems I answered my own question. you cant use twrp with hdmi only. native display only. Although it could be the commands would still work though you wouldn't be able to see what your doing i'm guessing? so in twrp i did a second recovery of my 4.2. katkiss backup since dropping my tf since I was again just getting spinning circles when booting and I'm now able to boot again. Hopefully this doesn't keep happening where tf wont boot and I have to keep recovering. Seems like dropping it may have done more than mess with display?
Hello, my Photon started acting up really weird. First of all, it was really slow. I thought it's because I had like 150MB left and it was nearly full data-wise. However, I erased most of the data, and left it with 3GB left. Didn't work and it got worse.
I have these stripes around the display (just at sides, not at middle), while phone is turned on. Doesn't matter if in system, or at boot logo. Doesn't matter, because whenever I get to system, I can be in system for like 1 minute, then every application starts crashing (Apex launcher, Google play, whatever you pick) and I basically can't get anywhere. Also if I go to sleep mode, phone is basically dead and it's pure luck when I will turn on phone again. I am trying every few minutes and it's worthless, because any time I get to system anyway, I crash after few seconds.
What to do? I was planing to install custom ROM yesterday, but never got to that, because this all started to act up. So what should I do? Reset system? Any other ideas? Is phone dead?
Sorry for bad english, no bully please.
Thanks in advance
Update - now when I am trying to start up my phone, I have just black screen with white lines in the middle. Then phone shuts down. I will give more info when I will be at home and can get phone on charger
Well definitely try to charge the device up. You might try re-flashing the stock ROM using RSD Lite... Although from your description I fear your issue may be hardware related.
Could turn device on. Apparently that black screen with white lines was just discharged phone. When I put it on charger, I could again boot into system and it was working until I pressed power button to go to sleep mode and phone is again dead. Will try to flash RSD Lite later today and will post what happened
kanek06 said:
Could turn device on. Apparently that black screen with white lines was just discharged phone. When I put it on charger, I could again boot into system and it was working until I pressed power button to go to sleep mode and phone is again dead. Will try to flash RSD Lite later today and will post what happened
Click to expand...
Click to collapse
Charge the device as much as you possibly can before doing anything with RSD. Ideally you should have at least 50% battery in the device when flashing anything.
This is really miserable. I can't really get into bootloader. Because phone after that 'crash' or whatever you want to call it is dead and I can't even see if it's turned on or not. Basically I am randomly waiting when it's gonna restart and then I just get into system. Even if I fully discharge it, it will have black screen with white lines first, it flashes quite couple times and then it will finally boot into system. Also I remember it was ***** in past to get into recovery. Can I do anything from system? Because as soon as I don't turn off my screen by power button, phone is working, though it has those lines on side of LCD (I will try to borrow camera from someone and post it here today).
I set automatic turning screen off for 10 minutes and I am really careful about pressing power button. Sucks there is only option for just 10 minutes, so I have to tap on screen at least for once every 10 minutes or I will not have working phone. **** my life, really.
kanek06 said:
This is really miserable. I can't really get into bootloader. Because phone after that 'crash' or whatever you want to call it is dead and I can't even see if it's turned on or not. Basically I am randomly waiting when it's gonna restart and then I just get into system. Even if I fully discharge it, it will have black screen with white lines first, it flashes quite couple times and then it will finally boot into system. Also I remember it was ***** in past to get into recovery. Can I do anything from system? Because as soon as I don't turn off my screen by power button, phone is working, though it has those lines on side of LCD (I will try to borrow camera from someone and post it here today).
I set automatic turning screen off for 10 minutes and I am really careful about pressing power button. Sucks there is only option for just 10 minutes, so I have to tap on screen at least for once every 10 minutes or I will not have working phone. **** my life, really.
Click to expand...
Click to collapse
Why can't you turn the phone off and charge it while off, or boot to recovery and charge the phone in recovery?
arrrghhh said:
Why can't you turn the phone off and charge it while off, or boot to recovery and charge the phone in recovery?
Click to expand...
Click to collapse
About charging it while turned off - Can't because when I try to turn it on again, it's roulette when I get finally bootloader logo and not black screen with white stripes.
And boot to recovery. Is it possible to like download some command prompt application and boot to bootloader from there? I know when I had my G1 (and when I actually understood android ) you could boot to recovery or bootloader via console. I have astro installed on phone, so downloading some console application and installing it shouldn't be problem.
Btw as we are speaking, I tried to call someone and I basically get same thing like when I am going to sleep mode, I get black screen and now I am just waiting, when phone will eventually want to restart itself.
kanek06 said:
About charging it while turned off - Can't because when I try to turn it on again, it's roulette when I get finally bootloader logo and not black screen with white stripes.
And boot to recovery. Is it possible to like download some command prompt application and boot to bootloader from there? I know when I had my G1 (and when I actually understood android ) you could boot to recovery or bootloader via console. I have astro installed on phone, so downloading some console application and installing it shouldn't be problem.
Btw as we are speaking, I tried to call someone and I basically get same thing like when I am going to sleep mode, I get black screen and now I am just waiting, when phone will eventually want to restart itself.
Click to expand...
Click to collapse
Still sounds like some sort of a hardware issue, is the phone new to you?
You can certainly force bootloader mode, in several ways. When it's off you can hold power + camera and it will give you a choice of what to boot. When it's in Android you can do "adb reboot recovery" or "adb reboot bootloader" depending on where you want to end up. There are various apps which can also do this for you, if you are on the stock ROM but rooted.
arrrghhh said:
Still sounds like some sort of a hardware issue, is the phone new to you?
You can certainly force bootloader mode, in several ways. When it's off you can hold power + camera and it will give you a choice of what to boot. When it's in Android you can do "adb reboot recovery" or "adb reboot bootloader" depending on where you want to end up. There are various apps which can also do this for you, if you are on the stock ROM but rooted.
Click to expand...
Click to collapse
Phone is not new. I bought it used about one year ago.
I am not entirely new to android, but I didn't have android phone for 2 years and then I got this one. So I am really pretty **** with android atm
I will try reboot to bootloader from some console application.
I am rooted, opened bootloader, stock rom
Finally got into recovery, what now?
Also, when I once booted to system, I downloaded some root checking app, and root apparently isn't here. Well cornholio told me it is rooted back when I gave him my phone to perform sim card mod, but whatever. However, I am in recovery, but device is not detected by RSD Lite.
kanek06 said:
Finally got into recovery, what now?
Also, when I once booted to system, I downloaded some root checking app, and root apparently isn't here. Well cornholio told me it is rooted back when I gave him my phone to perform sim card mod, but whatever. However, I am in recovery, but device is not detected by RSD Lite.
Click to expand...
Click to collapse
Well reading back thru this thread, I was suggesting RSD Lite back to stock. I'm not really sure what you want to achieve tho, what your "final" goal is here.
I'm not even sure what kind of recovery you are booted into - stock recovery? CWM?
Either way, if you want to RSD the phone back to stock, you need to boot into fastboot/bootloader mode - not recovery. Just make sure the phone is charged up as much as possible before flashing in RSD.
Oh, sorry - misunderstanding from my side, thought I can switch to fastboot from recovery, oh well.
Also yeah, stock recovery.
To spread more facts - in case somebody would have similiar problems, when I try to just turn phone on, I have zero success what so ever. There's just this blank black page flashing every few seconds. However, when I remove back cover, I somehow force phone to load to bootloader logo, then I finally get chance to force phone to get to recovery. I will try to get to fastboot
kanek06 said:
Oh, sorry - misunderstanding from my side, thought I can switch to fastboot from recovery, oh well.
Also yeah, stock recovery.
To spread more facts - in case somebody would have similiar problems, when I try to just turn phone on, I have zero success what so ever. There's just this blank black page flashing every few seconds. However, when I remove back cover, I somehow force phone to load to bootloader logo, then I finally get chance to force phone to get to recovery. I will try to get to fastboot
Click to expand...
Click to collapse
Not sure if stock recovery has adb enabled, but if you have adb you can 'adb reboot bootloader'.
Otherwise do the power+cam trick I mentioned earlier.
http://i.imgur.com/3XYLngJ.png
kanek06 said:
http://i.imgur.com/3XYLngJ.png
Click to expand...
Click to collapse
Did you remove the getvar lines from the xml file...?
Yes
Weird. I only recall seeing that when people were trying to downgrade... but you are flashing 4.1.2.
The phone is in fastboot mode? What happens when you click "show device"? The "Device Properties" section is eerily empty.
I know it sounds shady, when I am coming back here again in few weeks, just been a bit busy lately, sorry about that.
However, somehow I got phone to flash it. The white graphical lines on sides dissapeared, however I got some new bug - I can't use phone in portrait mode, just in landscape - aka I need to swipe keyboard to have phone working. Also, that thing when phone completely stops working now occurs only when I am in that portrait mode, but I can restart phone this time.
When I finished this, it was midnight so I went to bad, so I tried to set up alarm, if it's gonna randomly shutdown like before and unfortunately, yes it did. I was waken up with this classical white line graphical bug black screen and had to reboot the phone. Oh well, managed to boot to system and it takes 5 minutes to fetch sim card (I have sim card mod from cornholio) and as I said, those white lines on side aka mysterious graphical bug is back.
Unfortunately for me, starts looking like real hardware issue now
It started a few days ago, I was testing a cardboard/gear vr unity game and the screen would turn black but the buttons were responsive and I could get it to hard reboot or make it come back again after plugging it back into the gear. I looked around but couldn't find anything that resembles my issue.
Now as soon as it boots it goes into a black screen after samsung and carrier logos show, i sometimes get a glimpse of the lock screen and respond to some input.
The phone is still on, I can feel the battery warm.
-No response to any input. Not even pwr+vol down.
-PC won't detect it when plugged.
-No lights on charging.
-I need to let it fully drain for it to shut down and try anything again.
-Did a factory reset from recovery mode, wipe cache. Still the same.
-No root.
-There was an update that may have installed overnight but can't confirm because can't access system info.
EDIT: New find! when booting to recovery, goes into "Installing Update" and then "No command".
Any thoughts??
Is there some pc software that i can use to try to reinstall firmware? Something like SEUS for sony phones back in the day?
Is odin safe or should i look into a samsung official tool? I've never used odin so i'm not sure of it's capabilities (this is my first sammy phone, I had it to get to test gear vr apps)
Sorry for the long post but wanted to get all the info out there.
Thanks!
Can you enter "Download Mode"? (By rebooting and pressing HOME + VOLUME DOWN)
If yes, I suggest that you try, as you suggested, reinstalling your firmware.
You will have to know your carrier, or specific phone model (G930X, where X represents carrier letter (Example: T for T-Mobile) )
Modified Odin (by PrinceComsy): https://androidfilehost.com/?fid=24591023225177749
Then I suggest downloading firmware from https://SamsungBay.com as all other sources restrict download speed (So it takes a minimum of 13 hours).
https://samsungbay.com/download-firmware/?device=&model=sm-G930&firmware=
Once you have Odin and Firmware, load the correct files.
(AP_G930X), (BL_G930X), (CP_G930X), and (CSC_G930X) into Odin.
Power off phone, and boot into download mode (Pressing HOME + VOLUME DOWN)
N.B/ You will lose all your phone data, sadly, but it seems you've already wiped it.
Hi everyone. I'm using an Oppo Find X2 Lite since january and today I finally received the update to the ColorOS 11.1 based on Android 11. I put my phone in charge and started updating, but when the process finished something strange happened. When the phone re-booted it showed nothing but a black screen with the top bar with time, wi-fi and battery icons that goes on and off in a loop. I can't do anything: if I try to boot off the phone by pressing the power key, a white empty rectangle appears on the screen, but touching it does nothing. If I press the power button multiple times I can enter in a "SOS Emergency" mode by which I can use the flash light as an SOS or call my local number for an ambulance.
After buying the phone, I debloated it with adb commands following a list I found on this forum: may this be the reason for this behaviour? After debloating the phone I updated it a couple of times, but they were minor security update of ColorOS 7.
I have no idea of what to try, I'm just waiting for the battery to die and then try to access a recovery mode. Hope someone can help me, cheers
kibalcic said:
Hi everyone. I'm using an Oppo Find X2 Lite since january and today I finally received the update to the ColorOS 11.1 based on Android 11. I put my phone in charge and started updating, but when the process finished something strange happened. When the phone re-booted it showed nothing but a black screen with the top bar with time, wi-fi and battery icons that goes on and off in a loop. I can't do anything: if I try to boot off the phone by pressing the power key, a white empty rectangle appears on the screen, but touching it does nothing. If I press the power button multiple times I can enter in a "SOS Emergency" mode by which I can use the flash light as an SOS or call my local number for an ambulance.
After buying the phone, I debloated it with adb commands following a list I found on this forum: may this be the reason for this behaviour? After debloating the phone I updated it a couple of times, but they were minor security update of ColorOS 7.
I have no idea of what to try, I'm just waiting for the battery to die and then try to access a recovery mode. Hope someone can help me, cheers
Click to expand...
Click to collapse
Try holding volume up + power button for 10-15 seconds phone should power down , when it does hold voume down plus power button should take you to recovery mode.
Hi,
I answer late but I got the same problem with my Oppo Find X2 lite. After dowonloading the Color 0S11.1 update my phone restarted.
But then I couldn't unlock it. The screen was flashing on and off in a bootloop.
I managed to get in recovery mode using the method described above. Unfortunately I couldn't just remove or restart the update and I had to do a full factory reset. Then the Colors OS 11 update went smooth.
I had also debloated my phone but only a few apps and services. I was very careful. So I have another clue : to me it looked like the phone couldn't load the fingerpint id sensor on start screen.
I wonder if it shouldn't be deactivated before any major updates.
@kibalcic : did you manage to solve your problem ?