Following Verizon and this forum's guidance, I bought a foreign sim card upon arriving in Ireland for the purpose of getting a better data plan while here for the next month.
Upon inserting the SIM card, the phone tells me that the SIMcard is locked, and then loops into my boot animation endlessly. Only a battery pull will stop it. I never get a chance to unlock either my SIM port or enter the PIN for the new sim.
I thought Fission 2.4.3 was compatible with global services? I pulled the new SIM and put the verizon SIM back in, but since I don't want to purchase their data plan, I have voice only, no 3G data access.
I applied the Fission Sim hotfix, and also tried wiping the cache before booting with the new Sim, same result.
The verizon sim works fine here, I'd just rather have the data service. The only other possibility is that the new sim is bad, but the way it is looping into the boot screen (not the M screen) I am suspect of a conflict with Fission.
Last thing I want to do is fry/brick this phone trying to get it to work!
Any advice on how to get this rig runnin'?
BTW, seems Motorola does not sell any phones in Ireland. Not one to be found on any of the shops on Grafton St.
Not sure if Fission can handle pin lock - make sure the local sim you got has pin function disabled
Found this while trying to sort out the problem with my HTC Hero not recognising a Meteor sim, it seems Meteor have issues with certain smartphones, try a sim from Vodafone, O2 or Three, they all actively support smartphones and mobile broadband.
The problem with Meteor is they are part of Eircom who have the monopoly on land lines and are a bit of a technical dinosaur.
Anyone else experience issues with swapping their SIM from their old phone into the G2X? I have reseated mine from my N1 into the phone 3 times, and each time I boot it says I have no SIM card. Pulling my hair out!
I went from an N1 to the g2x and i had the same problem so here is the deal...
the g2x is a 4g phone and it required a new sim card version so i had to trade in the sim card that i have had since my i got my razr in 2005...
so disclaimer to anyone who buys the phone outright, you have to have an updated sim card... just go into tmobile and they will give you one...
mines wont check for sim card at all it keep saying no service even without a sim card it usually say no sim but it just say no service can someone help plz plz plz
Fyi make sure it is a corporate store. Otherwise it could cost ya $20. Customer care might even be able to mail you one...not sure. If your near Chicago I would just give you one of my extras.
Sent from my LG-P999 using XDA App
I reused the sim from my N1 and have had no issues but it was probably a newer version sim since I just got it beginning of last year.
If you have an old T-Mobile phone lying around, try inserting your SIM into that, and using it, then re-insert it into your G2X.
Alright I opened it up and it looked like the antenna cable was a bit frayed near the tip, I attached a few pics. It was connected though so not sure :/
http://imgur.com/i2oH9,5LnGx,n97wZ ( three images)
I have the same issue.
Mint condition G2X does not detect my sim card reads "error while trying to connect to network"
I am running CM 7.2 I have wiped everything and reflashed still no luck.
Add one more to the pile...
I also recently began having this problem, but my device previously worked fine.
I have tried Restoring to Factory V21Y with Mar 11 Baseband
Flasing a GB Based ROM & Stock Kernel
Flashing CM9
Flashing CM10
Entering *#*#INFO#*#* Phone Info and modifying frequency band (No Go).
At one point I was able to read the Phone # from the SIM card, but couldn't get a lock on Netowkr. I can visually detect T-Mobile and ATT in Mobile Networks.
I have tried this with 4G Enabled SIM Cards and older T-Mobile SIM Cards.
I have tried Simple Mobile, Straight Talk, & ATT SIM Cards.
I have tried using None APN's, the TMo/Simple Default APN's, and Modified APN's for Straight Talk & Family Talk.
No avail.
Any ideas?
I had the same problem. A new SIM card fixed it.
RE:
Core Memory said:
I had the same problem. A new SIM card fixed it.
Click to expand...
Click to collapse
I gave my friend my old G2x because she was switching from AT&T to TMobile. She went to the TMobile store and got a new SIM card and her old AT&T number transferred to it. It works on her old iPhone but when I insert the SIM card on the LG G2x , it keeps saying 'no SIM card inserted'....do i need to flash a certain baseband on it and/or setup a custom APN for it? I am on the stock ROM thats rooted...
Any help is much appreciateed
Sorry for not replying until now but I rarely visit here anymore. My G2X had a bad Sim card which a new Sim fixed. I just had to wait until the network could authorize with it.
Is there a way to use the phone without a SIM card? I don't have LTE in my area, and I keep getting the "no SIM Error" so was thinking that the SIM was useless anyways.
On the stock ROM every time I get the SIM error, or if I remove the SIM card itself, I get no data on the phone at all. When I try to turn on Mobile Data it prompts me to insert the SIM.
On other CUSTOM or JB ROMs, I don't get the SIM error prompt but I simply get no data.
On older Sprint phones, I know you can go into the DEBUG menu to see that EVDO/3G was actually being authenticated, the handshake was negotiated, then connection type/speed/tower/hand-off status, etc. Is there such an option with Verizon phones? I'm wondering if Data is completely shut off without the SIM, or if the data connection is actually established on the network but simply blocked from being used?
PS - per recommendation I have tried using the PHONE INFO app to switch the option to NV only, but am still getting no data. Voice/Text work perfectly.
black7 said:
Is there a way to use the phone without a SIM card? I don't have LTE in my area, and I keep getting the "no SIM Error" so was thinking that the SIM was useless anyways.
On the stock ROM every time I get the SIM error, or if I remove the SIM card itself, I get no data on the phone at all. When I try to turn on Mobile Data it prompts me to insert the SIM.
On other CUSTOM or JB ROMs, I don't get the SIM error prompt but I simply get no data.
On older Sprint phones, I know you can go into the DEBUG menu to see that EVDO/3G was actually being authenticated, the handshake was negotiated, then connection type/speed/tower/hand-off status, etc. Is there such an option with Verizon phones? I'm wondering if Data is completely shut off without the SIM, or if the data connection is actually established on the network but simply blocked from being used?
PS - per recommendation I have tried using the PHONE INFO app to switch the option to NV only, but am still getting no data. Voice/Text work perfectly.
Click to expand...
Click to collapse
ASFAIK, the SIM does 3g and 4g. WHY? because 3g on the gs3 is ehrdp and that also requires a handshake between 3g and lte. I believe it is like using 3g tech but with the pipeline size of lte... or thats as far as I've read into it.
xicewallx said:
ASFAIK, the SIM does 3g and 4g. WHY? because 3g on the gs3 is ehrdp and that also requires a handshake between 3g and lte. I believe it is like using 3g tech but with the pipeline size of lte... or thats as far as I've read into it.
Click to expand...
Click to collapse
Thanks for the info, xicewallx. I was afraid of that, however I've read of people flashing both Sprint and Verizon variants of the SGS3 to Boost, Straight Talk (CDMA), Verizon Pre-Paid which all I assume do not use LTE/SIM. I presume this means that the SGS3 can certainly use 3G without the need of the SIM card. I'm looking for a way to default to this on the SGS3 for us poor folk who do not have the luxury of LTE yet and have to deal with the SIM error until Verizon/Samsung fixes it.
Any help would be greatly appreciated!
I was able to get to a debug screen using the IOTHiddenMenu option (through Any Cut) but it simply stated that EVDO was in "sleep state." I wasn't able to figure out how to get it to start a connection yet.
Go to the Verizon store and get a free SIM card? Why go through all of this trouble.
Sent from my Nexus 7
TheBiles said:
Go to the Verizon store and get a free SIM card? Why go through all of this trouble.
Sent from my Nexus 7
Click to expand...
Click to collapse
Thanks for the suggestion. Issue is that the phone is having the NO SIM error randomly. Have already tried a different SIM from Verizon (friend's account) but still have that same issue.
black7 said:
Thanks for the suggestion. Issue is that the phone is having the NO SIM error randomly. Have already tried a different SIM from Verizon (friend's account) but still have that same issue.
Click to expand...
Click to collapse
So get a new phone? That one is obviously faulty. Go get a free replacement. You have to live with it for 2 years. I wouldn't want a faulty device for a week let alone 2 years.
Sent from my SCH-I535 using Tapatalk 2
Are you in a poor signal area? Only time I've received the "No Sim" error was at my parents where the signal is crap. As for using it without the sim card, doubt that's possible since the sim is used for authentication if I'm not mistaken.
hello,
if i understand correctly, the sim card in the S3 is basically the same as all the previous world phones, meaning its just RUIM card. The MEID and IMEI are on the phone, the card it comes with is just basically a storage device in simple terms. can someone who has access to another verizon active S3 sim try putting the card into their phone and checking the IMEI that the phone reports? does swapping the cards change the IMEI in other words. I do not think it will, but interested to know for sure.
i just started playing with one of these, but i feel realy confident you can get non 4G services to work without a sim in it.
cheers,
disco
disco_y2k said:
hello,
if i understand correctly, the sim card in the S3 is basically the same as all the previous world phones, meaning its just RUIM card. The MEID and IMEI are on the phone, the card it comes with is just basically a storage device in simple terms. can someone who has access to another verizon active S3 sim try putting the card into their phone and checking the IMEI that the phone reports? does swapping the cards change the IMEI in other words. I do not think it will, but interested to know for sure.
i just started playing with one of these, but i feel realy confident you can get non 4G services to work without a sim in it.
cheers,
disco
Click to expand...
Click to collapse
You have it just about backwords. The sim is the real identifier on vzw 4g devices. You can take a working authorized sim and use it to activate another 4g Verizon phone and it will activate under the phone number associated with the sim.
Sent from my SCH-I535 using xda app-developers app
thats interesting, S3 still has an MEID also doesnt it?
thanks for the info!
cheers,
disco
disco_y2k said:
thats interesting, S3 still has an MEID also doesnt it?
thanks for the info!
cheers,
disco
Click to expand...
Click to collapse
There is still an ESN /MEID that the network uses to identify the phone for the CDMA side of the network. The process is all handled by the LTE SIM on LTE phones, though.
OP: You have a broken phone. The no-SIM error is not something that goes away. Take it to a store and get a new SIM and/or order a replacement.
Sent from my Amazon Kindle Fire using Tapatalk 2
im gonna have to dig in some more i am still not convinced the card is not a ruim card. like the other sprint and verizon world fones the imea is in the fone im pretty sure, until you instroduce another networks actual gsm card. i still the card it comes with is a simple ruim that holds the login info and other data, etc, well you know what ruim is.
does anyone have a service manual or white papers on this one yet? i would love to read through them.
thanks again bro
cheers,
disco
I'm still looking for an answer to this if anyone has any suggestions. Any way to get 3G without a SIM card?
Did you ever get a new phone from Verizon? It seems like an issue with your phone, not the network.
I have been trying something similar along the way as I have been able to get rock solid data by switching to EvDo only using the Phone Info app.
I gave determined I am connecting to a US Cellular tower when I have solid data.
But while in EvDo only I cannot send or receive calls or texts.
I am looking for a way to enable calls and text while in EvDo only mode.
Not trying to highjack just thought this is somewhat related.
TheBiles said:
Did you ever get a new phone from Verizon? It seems like an issue with your phone, not the network.
Click to expand...
Click to collapse
New phone and new SIM from Verizon seems to have made the problem less apparent, but it still happens, especially when driving through areas where reception is a bit spotty. It's really become an issue as I rely on getting emails for business, especially while traveling, and I don't get notifications of new emails if I have no data service which I don't become aware of until I actually look at the phone. Missed a couple of important emails/meeting invites because of this already...
Brenardo said:
I have been trying something similar along the way as I have been able to get rock solid data by switching to EvDo only using the Phone Info app.
I gave determined I am connecting to a US Cellular tower when I have solid data.
But while in EvDo only I cannot send or receive calls or texts.
I am looking for a way to enable calls and text while in EvDo only mode.
Not trying to highjack just thought this is somewhat related.
Click to expand...
Click to collapse
That would be fantastic if you come across something that will allow voice/text/EvDO(3G)! Have you made any headway on this? Would be glad to help in any way I can also to get this working.
black7 said:
I'm still looking for an answer to this if anyone has any suggestions. Any way to get 3G without a SIM card?
Click to expand...
Click to collapse
I flashed a VZW GS3 to Sprint. 3G data is working fine w/o a SIM card. If I put a non activated VZW card, data doesn't work obviously.
The trick in getting this to work is to use QPST to configure Profile 0 and Profile 1. When flashing to Sprint or Boost, you must also load a Sprint PRL into the device using QPST.
Sent from my SPH-L710 using Xparent SkyBlue Tapatalk 2
AlpineMan said:
I flashed a VZW GS3 to Sprint. 3G data is working fine w/o a SIM card. If I put a non activated VZW card, data doesn't work obviously.
The trick in getting this to work is to use QPST to configure Profile 0 and Profile 1. When flashing to Sprint or Boost, you must also load a Sprint PRL into the device using QPST.
Sent from my SPH-L710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Choose nv only, cdma evdo in phone info and program nv items and flash prl.
Sent from my SCH-I535 using xda premium
jclendineng said:
Choose nv only, cdma evdo in phone info and program nv items and flash prl.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
A little off subject but I how did you get it on sprint I'm trying to get mine on verizon prepaid and have it set to nv only. I must be missing somethin because my esn/meid all look right I get data but yet no calls
New guy here.
I recently purchased an AT&T i727 with the plan to use the bring your own phone program with straight talk. Even with the sim card activated, the phone reads "No Sim Card. Emergency Calls Only". I've used the sim card in other phones, so I know it's functional. I've rooted the phone and installed different roms, but I still get the same error. I can't edit any of the APN or network settings because it tells me I need to have a sim card inserted to do so.
I feel like I'm not super clueless at things like this, but I've done everything I know how to do. Any help is greatly appreciated.
Take it easy on me guys.
Thanks in advance
Sound like the phone isn't unlocked. There is a thread here on how to unlock it for free. Look in the general section.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Assuming the ST SIM is at&t SIM card , and it was working before , the problem might be somewhere around your phone , either SIM card slot , bad radio or blocked-from-network Skyrocket ... is it a craigslist phone ?
It is an AT&T compatible ST sim. I've already entered codes to unlock it and they all said the unlock was successful.
I actually purchased the phone on eBay. (I'm sure everyone will laugh upon reading that)
If the sim card works in other phones and doesn't work in your skyrocket but you have it in the correct way in the sim slot then it's gonna be your sim card slot. With ST your phone doesn't have to be unlocked for the sim card to work in it. Trust me on that I'm using my skyrocket on ST and have used about 10 different AT&T phones on ST and none of them were unlocked until I sold them. You'll need to get ahold of eBay and paypal (who you hopefully used) and try and get your money back. Otherwise you have a really expensive mp3 player.
Sorry for the bad luck but that's what it looks most like to me. I used to work for AT&T and that's the logical problem. I would say try and get a warranty for it but I doubt it still has a warranty and even if it did AT&T and Samsung wouldn't do anything about it because a problem with the sim card slot is considered physical damage. You'll just have to try and get your money back for the phone.
Just my advice and $.02
I have a s-off, boot loader unlocked, rooted AT&T HTC One X. I got an unlock code and have had it for some time because I wanted to use the phone on Straight Talk. I ordered a Micro SIM card from the straight talk website and inserted it and booted up the phone and all it says is Unprovisioned SIM Card. I have tried flashing different stock roms, and the current one is a stock rooted rom. All the tutorials I've seen say that when it boots up it should request a cell unlock code on screen, but mine doesn't.
SebringTech said:
I have a s-off, boot loader unlocked, rooted AT&T HTC One X. I got an unlock code and have had it for some time because I wanted to use the phone on Straight Talk. I ordered a Micro SIM card from the straight talk website and inserted it and booted up the phone and all it says is Unprovisioned SIM Card. I have tried flashing different stock roms, and the current one is a stock rooted rom. All the tutorials I've seen say that when it boots up it should request a cell unlock code on screen, but mine doesn't.
Click to expand...
Click to collapse
Provisioning a SIM card is sort of programming tariffs, features and functions to it. That is something your operator does before they give you a SIM card (usually it is done way in advance at the factory). In the modern world, however, operators may opt for SIM cards that are not programmed beforehand, but for such that provisioning process will happen the first time you put it in the phone. I'm am not sure if this must be an interactive process to the user, but the SIM card sure needs to communicate to the mobile network. I would imagine that in a SIM-locked phone it just can't talk to its home network to get initialized the way it needs to.
Please take everything I said with a grain of salt - I have but a very vague picture of the process and may be making stuff up, but as someone that has just recently unlocked their SIM-locked AT&T device, I can assure you that with good old normal SIM card from years ago (that I have) the device asks for an unlock code like all tutorials say it does.
You need to be in stock rom or be not root
Sent from my Nexus 4 using xda app-developers app