Database Info

【ROM】Download link for Official A510 Rom (updated by 9th Nov)

Hi everyone,
I calculate a download website n it can be successfully entered:
http://global-download.acer.com/Ste...0&BC=Acer&SC=&LC=en&OS=a09&FS=O02&Category=OS
Note: If u see nothing there, plz reflash a few times.
(updated by 9th Nov)
Some patches added, u guys can check it out. ( I flashed the patch n found nothing changed! seemd just update some built-in softwares )
(updated by 25th Sep)
There'r some new ROMs with clear label added.

Interesting!
The ROMs on that site are:
Acer_AV041_A510_1.072.00_EMEA_CUS1
Acer_AV041_A510_1.073.00_WW_GEN1
Acer_AV041_A510_1.074.00_EMEA_GB
Acer_AV041_A510_1.076.00_EMEA_DE
Acer_AV041_A510_1.076.00_PA_CUS1
Acer_AV041_A510_1.079.00_PA_CA
Acer_AV041_A510_1.084.00_AAP_AU
Acer_AV041_A510_1.090.00_TWN_GEN1
There's a couple new regions there I didn't know existed

NoThrills said:
Interesting!
The ROMs on that site are:
Acer_AV041_A510_1.072.00_EMEA_CUS1
Acer_AV041_A510_1.073.00_WW_GEN1
Acer_AV041_A510_1.074.00_EMEA_GB
Acer_AV041_A510_1.076.00_EMEA_DE
Acer_AV041_A510_1.076.00_PA_CUS1
Acer_AV041_A510_1.079.00_PA_CA
Acer_AV041_A510_1.084.00_AAP_AU
Acer_AV041_A510_1.090.00_TWN_GEN1
There's a couple new regions there I didn't know existed
Click to expand...
Click to collapse
So you downloaded all n checked them one by one? Thx for the instructions.

Can I flash these over CWM ?

picard47 said:
Can I flash these over CWM ?
Click to expand...
Click to collapse
I haven't tested these ROMs yet, my tab is still on the way from service.
You can have a try unless u know what u do.

jokerzlh said:
So you downloaded all n checked them one by one? Thx for the instructions.
Click to expand...
Click to collapse
Yeah, I wanted to know if there was a new build somewhere... Unfortunately not
picard47 said:
Can I flash these over CWM ?
Click to expand...
Click to collapse
Yes, but they will remove your custom recovery and might even lock your bootloader (there are bootloader.blob files, but I don't know what they do).

only 6 are showing now?? im grabbing them all, hoping my region is still one of them!

Hmm that's odd I have a au over and I cannot ota to the newer version listed??
Acer_AV041_A510_1.084.00_AAP_AU
Mine atm is Acer_AV041_A510_1.036.00_AAP_AU
---------- Post added at 04:58 PM ---------- Previous post was at 04:11 PM ----------
malos1984 said:
Hmm that's odd I have a au over and I cannot ota to the newer version listed??
Acer_AV041_A510_1.084.00_AAP_AU
Mine atm is Acer_AV041_A510_1.036.00_AAP_AU
Click to expand...
Click to collapse
If I download to tab and go to built in recovery and load this firmware could it lock or stuff future otas?

You need to scroll down to see the 2 other ones..
Sent from my MB525 using xda app-developers app

malos1984 said:
Hmm that's odd I have a au over and I cannot ota to the newer version listed??
Acer_AV041_A510_1.084.00_AAP_AU
Mine atm is Acer_AV041_A510_1.036.00_AAP_AU
---------- Post added at 04:58 PM ---------- Previous post was at 04:11 PM ----------
If I download to tab and go to built in recovery and load this firmware could it lock or stuff future otas?
Click to expand...
Click to collapse
Yes. This is also important for other users reading this thread: These ROMs are probably beta's, so if you flash this on your tablet you won't get new OTA's. I'm not 100% certain about this, but just in case: Make a backup!!!

OK so its not like Samsung where I can install the firmware and go back.
Btw when I do power and volume I get android guy with red error why is this. I have not rooted nor tried to install kernel/rom before
I was under the hope an official firmware wouldn't void warranty but it looks like it won't do updates without cwm which I'm not comfortable installing at this time

Marmotte51 said:
You need to scroll down to see the 2 other ones..
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
lol, oops, didnt see the scroll bar hidden over there....

Rusty_Gunn said:
lol, oops, didnt see the scroll bar hidden over there....
Click to expand...
Click to collapse
Sent from my A510 using xda app-developers app

malos1984 said:
OK so its not like Samsung where I can install the firmware and go back.
Btw when I do power and volume I get android guy with red error why is this. I have not rooted nor tried to install kernel/rom before
I was under the hope an official firmware wouldn't void warranty but it looks like it won't do updates without cwm which I'm not comfortable installing at this time
Click to expand...
Click to collapse
That's because the Acer recovery does not have a menu or other interface. If you boot into stock recovery, you'll get the 'error android'. If you boot to recovery with a file called 'update.zip' on your SD-card, the stock recovery will flash this update.zip without error.
However, you can only flash official update.zip files with this, no custom ROMs.

NoThrills said:
That's because the Acer recovery does not have a menu or other interface. If you boot into stock recovery, you'll get the 'error android'. If you boot to recovery with a file called 'update.zip' on your SD-card, the stock recovery will flash this update.zip without error.
However, you can only flash official update.zip files with this, no custom ROMs.
Click to expand...
Click to collapse
Oh OK thanks.
Yeah I tried installing that one from SD card it failed at 50%

regarding the update script,
to get these roms to work, the region check needs to be bypassed (after installing a custom rom), can i just comment out the line in question?
assert(getprop("ro.product.name") == "a510_pa_ca");
and to keep cwm recovery, can i just comment out the recovery package extraction?
package_extract_dir("recovery", "/system");
do i need to comment out the bootloader.blob file? some of what i read seems to indicate if i dont comment it out, the bootloader will be locked after flashing.
then rezip, make sure cwm is set to take an unsigned zip, and flash?

for those trying to select the right rom and dont want to download all 8, the correspond regions are as follows (the RV28RCXX begin an excerpt from the file name on the acer site):
Acer_AV041_A510_1.072.00_EMEA_CUS1 --> RV28RC02
Acer_AV041_A510_1.073.00_WW_GEN1 --> RV28RC01
Acer_AV041_A510_1.074.00_EMEA_GB --> RV28RC03
Acer_AV041_A510_1.076.00_EMEA_DE --> RV28RC04
Acer_AV041_A510_1.076.00_PA_CUS1 --> RV28RC04
Acer_AV041_A510_1.079.00_PA_CA --> RV28RC06
Acer_AV041_A510_1.084.00_AAP_AU --> RV28RC08
Acer_AV041_A510_1.090.00_TWN_GEN1 --> RV28RC10
they all have region checks, so if you have installed a custom rom, the acer roms will fail to flash without some additional tweaking. And two regions (RC04) do have the exact same file name, no idea why acer did that.

And for A511 ?

OK so I retried flashing after saving data and it worked this time last time I tried it kept failing at 50%.
No noticeable difference and the stock browser still crashes on me.
Oh well just have to wait for jelly bean update maybe for some noticeable fixes.
Acer_AV041_A510_1.084.00_AAP_AU --> RV28RC08
For any Aussies reading here I have tested a full deplete and had no major issues except the ones I was already getting I.e stock browser crash and occasionally can't wake up the device.
Though this hasn't happened yet I'm assuming it still is there.

FordSierra88 said:
And for A511 ?
Click to expand...
Click to collapse
The website for A511 is almost same,.
But no ROMs available now. I will keep updating.

Stock, rooted...cannot install 4.4.1. WHY???

I've got stock, odexed....am rooted. That's it. Got the update, trying to flash with TWRP and get "system/build.prop has unexpected contents" error. Can't install the update.
WHY????? It's killin' me!
Thanks.

velveteen71 said:
I've got stock, odexed....am rooted. That's it. Got the update, trying to flash with TWRP and get "system/build.prop has unexpected contents" error. Can't install the update.
WHY????? It's killin' me!
Thanks.
Click to expand...
Click to collapse
you apparently have a modified build.prop. You probably will have to re-flash system.img to apply the OTA.
or find what was changed in build.prop and revert the change.

If you installed ANY modifications (dalvik mod, camera mod, center clock, dpi changes, ANYTHING) than it will not flash.

Synyster06Gates said:
If you installed ANY modifications (dalvik mod, camera mod, center clock, dpi changes, ANYTHING) than it will not flash.
Click to expand...
Click to collapse
Hey guys, got (what I believe is) a similar issue.
the error message I'm getting when I try to flash the update (or sideload it) is "EMMC:/dev/block/platform/msm_sdcc.1/by-name/bootand a huge string of characters ending with the end quote that follows)" has unexpected contents.
I've flashed back to stock krt16m, bootloader is still unlocked with cwm recovery, and I still get this error. The only modifications I had made were flashing the bricked-kernel hammerhead and enabling doubletap to wake, also installed xposed framework with gravitybox and advanced power options.
I flashed the uninstall file for bricked-kernel hammerhead (which was a boot.img so assuming it was this and not xposed?) but I'm still unable to flash the update to 4.4.1
suggestions? is there a way to flash a new boot.img? I'm a relative beginner.. I'm unable to track down a link that has a stock boot.img, I'm not sure if this is part of the factory image but I'm assuming not if I'm still having this issue..
thank you for any input!

desucca said:
Hey guys, got (what I believe is) a similar issue.
the error message I'm getting when I try to flash the update (or sideload it) is "EMMC:/dev/block/platform/msm_sdcc.1/by-name/bootand a huge string of characters ending with the end quote that follows)" has unexpected contents.
I've flashed back to stock krt16m, bootloader is still unlocked with cwm recovery, and I still get this error. The only modifications I had made were flashing the bricked-kernel hammerhead and enabling doubletap to wake, also installed xposed framework with gravitybox and advanced power options.
I flashed the uninstall file for bricked-kernel hammerhead (which was a boot.img so assuming it was this and not xposed?) but I'm still unable to flash the update to 4.4.1
suggestions? is there a way to flash a new boot.img? I'm a relative beginner.. I'm unable to track down a link that has a stock boot.img, I'm not sure if this is part of the factory image but I'm assuming not if I'm still having this issue..
thank you for any input!
Click to expand...
Click to collapse
Is Bricked the only kernel you've used? Or did you try Franco as well? Francos modifies a few files that need to be fixed before you can flash the update - even if you flashed a stock boot.img.
If you haven't, try the stock boot.img from http://forum.xda-developers.com/showthread.php?t=2513701

Got the same message. Flash the stock 4.4 (not 4.4.1) boot.img from the factory zip.

Synyster06Gates said:
Is Bricked the only kernel you've used? Or did you try Franco as well? Francos modifies a few files that need to be fixed before you can flash the update - even if you flashed a stock boot.img.
If you haven't, try the stock boot.img from http://forum.xda-developers.com/showthread.php?t=2513701
Click to expand...
Click to collapse
yep, bricked was the only one I've tried so far. I'll try this and report back, thank you
*update* worked! thanks very much, it's updating right now.

desucca said:
yep, bricked was the only one I've tried so far. I'll try this and report back, thank you
Click to expand...
Click to collapse
I was the same as you. I had to flash stock boot.img and system.img for it to work. I only tried Bricked but went back to stock and at one point I tried Xposed. Guess one of them left a trace.
Sent from my Nexus 5 using xda app-developers app

david23c said:
you apparently have a modified build.prop. You probably will have to re-flash system.img to apply the OTA.
or find what was changed in build.prop and revert the change.
Click to expand...
Click to collapse
This. What did you modify in your build.prop? Revert to your backed up original build.prop (.bak), install a new stock build.prop, or flash system.img.

Nitemare3219 said:
Got the same message. Flash the stock 4.4 (not 4.4.1) boot.img from the factory zip.
Click to expand...
Click to collapse
you should flash boot.img and system.img to make sure you have a stock system partition.

david23c said:
you should flash boot.img and system.img to make sure you have a stock system partition.
Click to expand...
Click to collapse
i have the same problem, does flashing these files affect any of my data or configuration?

cannot update rooted nexus?
so in short can we say we just cannot update to 4.4.1 without reverting back to and losing all app data ?

Guys,
Please help me out here. I rooted my Nex5 because I could not stand the DPI (icons/text were ridiculously big)
Because an app I use a lot cannot function on a rooted phone, I unrooted my phone.
I guess this means the following: my bootloader is NOT stock (because I see the 'unlock' icon), I am NOT rooted and my OS is stock.
In the end I just want to get 4.4.1 the easiest way and of course still have my DPI still modified.
Thanks in advance!!!

gaurishmhatre said:
so in short can we say we just cannot update to 4.4.1 without reverting back to and losing all app data ?
Click to expand...
Click to collapse
Yes you can. I flashed the OTA in CWM after undoing the changes I'd made and it flashed fine without losing data

lowlow2 said:
Guys,
Please help me out here. I rooted my Nex5 because I could not stand the DPI (icons/text were ridiculously big)
Because an app I use a lot cannot function on a rooted phone, I unrooted my phone.
I guess this means the following: my bootloader is NOT stock (because I see the 'unlock' icon), I am NOT rooted and my OS is stock.
In the end I just want to get 4.4.1 the easiest way and of course still have my DPI still modified.
Thanks in advance!!!
Click to expand...
Click to collapse
You can't install the update. You need to revert all system settings to stock (including what ever changed your DPI) before you can update. After that, you can install it, re root and change your DPI;
---------- Post added at 06:10 AM ---------- Previous post was at 06:09 AM ----------
chucky8 said:
i have the same problem, does flashing these files affect any of my data or configuration?
Click to expand...
Click to collapse
No, your data and configuration will be fine.

Synyster06Gates said:
You can't install the update. You need to revert all system settings to stock (including what ever changed your DPI) before you can update. After that, you can install it, re root and change your DPI;
---------- Post added at 06:10 AM ---------- Previous post was at 06:09 AM ----------
No, your data and configuration will be fine.
Click to expand...
Click to collapse
Thank you, I encountered in fact the problem because I changed my build.prop.
I tried adb sideload, but it gave an error on build.prop.
I see what I need to do now, thank you!!
---------- Post added at 01:25 PM ---------- Previous post was at 01:19 PM ----------
lowlow2 said:
Thank you, I encountered in fact the problem because I changed my build.prop.
I tried adb sideload, but it gave an error on build.prop.
I see what I need to do now, thank you!!
Click to expand...
Click to collapse
One last question, can I just adjust (revert) the DPI setting ? Or will it detect I fuzzled with my build.prop and never work without replacing ? Thanks

lowlow2 said:
Thank you, I encountered in fact the problem because I changed my build.prop.
I tried adb sideload, but it gave an error on build.prop.
I see what I need to do now, thank you!!
---------- Post added at 01:25 PM ---------- Previous post was at 01:19 PM ----------
One last question, can I just adjust (revert) the DPI setting ? Or will it detect I fuzzled with my build.prop and never work without replacing ? Thanks
Click to expand...
Click to collapse
You should be able to just edit it back to original configuration.

Synyster06Gates said:
You should be able to just edit it back to original configuration.
Click to expand...
Click to collapse
Tried this but unfortunately not working. I have the original system.img (+-600MB)
Can you tell me how I flash this with ADB (weirdly couldn't find it on xda via search!)
Thanks!

lowlow2 said:
Tried this but unfortunately not working. I have the original system.img (+-600MB)
Can you tell me how I flash this with ADB (weirdly couldn't find it on xda via search!)
Thanks!
Click to expand...
Click to collapse
Here ya go. Make sure the drivers are installed correctly. This guide has it all. You will only be flashing system.img, not the entire bat
http://forum.xda-developers.com/showthread.php?t=2513701

Synyster06Gates said:
Here ya go. Make sure the drivers are installed correctly. This guide has it all. You will only be flashing system.img, not the entire bat
http://forum.xda-developers.com/showthread.php?t=2513701
Click to expand...
Click to collapse
thanks!!

[Q] Having trouble flashing roms to my M8

I unlocked the bootloader, did s-off and rooted through weaksauce. However when I try to install a zip file from my SD card in the bootloader, it always ends up aborting the installation, I tried clearing the cache and even wiping all the data but it still doesn't install. I tried two different roms and I get the same problems which makes me think that I am missing something with the phone. Does anyone have any idea what the holdup may be?

Harpuajim said:
I unlocked the bootloader, did s-off and rooted through weaksauce. However when I try to install a zip file from my SD card in the bootloader, it always ends up aborting the installation, I tried clearing the cache and even wiping all the data but it still doesn't install. I tried two different roms and I get the same problems which makes me think that I am missing something with the phone. Does anyone have any idea what the holdup may be?
Click to expand...
Click to collapse
Not sure but your downloads could be having errors, mem card has issues or worse, your recovery is fault!!!

mashk said:
Not sure but your downloads could be having errors, mem card has issues or worse, your recovery is fault!!!
Click to expand...
Click to collapse
I'll try it with the phone storage or a different SD card later tonight. I'll also try a different ROM. When you say my recovery is fault what exactly do you mean? Is this something that can be fixed?

Harpuajim said:
I'll try it with the phone storage or a different SD card later tonight. I'll also try a different ROM. When you say my recovery is fault what exactly do you mean? Is this something that can be fixed?
Click to expand...
Click to collapse
What recovery are you using? I use CWM and works fine for me.

Harpuajim said:
I unlocked the bootloader, did s-off and rooted through weaksauce. However when I try to install a zip file from my SD card in the bootloader, it always ends up aborting the installation, I tried clearing the cache and even wiping all the data but it still doesn't install. I tried two different roms and I get the same problems which makes me think that I am missing something with the phone. Does anyone have any idea what the holdup may be?
Click to expand...
Click to collapse
Take a look in this section at the thread I started. See if you can flash Skyfall or any AOSP ROM I'm able to flash those fine but all of the GPE ROMS and a couple others will not flash for me either. All AOSP and AOKP stuff flashes fine. Skyfall and ViperOne will flash for me. I dont know what the hell is going on.

Did you flash SuperSU zip to get permanent root and get rid of weak sauce after you soffd and flashed your recovery?

silver04v said:
Did you flash SuperSU zip to get permanent root and get rid of weak sauce after you soffd and flashed your recovery?
Click to expand...
Click to collapse
You know what? I'll bet that's whats happening to me. I have a thread in this section with the same deal. Mine has been Rooted and UL/S-Off for a while now but during the rooting, UL/s-off process (Introductions and videos) not once was this ever mentioned. I lost root on an install of Nu Sense today but the entire install was wonky so I just thought it was that. Where can I find this SuperSU zip and how do I get rid of weaksauce? I used Firewater and weaksauce on mine. Or are you saying that once you flash the zip it takes over what weaksauce was doing?
I wonder why so many ROMs flashed properly for months now and it's just recently with these GPE Roms I'm seeing all this trouble.
---------- Post added at 07:14 PM ---------- Previous post was at 06:57 PM ----------
silver04v said:
Did you flash SuperSU zip to get permanent root and get rid of weak sauce after you soffd and flashed your recovery?
Click to expand...
Click to collapse
Well, I found it and flashed it so I guess we'll see if that was the problem. Got it off of Chainfires site.

Duckman_UF said:
You know what? I'll bet that's whats happening to me. I have a thread in this section with the same deal. Mine has been Rooted and UL/S-Off for a while now but during the rooting, UL/s-off process (Introductions and videos) not once was this ever mentioned. I lost root on an install of Nu Sense today but the entire install was wonky so I just thought it was that. Where can I find this SuperSU zip and how do I get rid of weaksauce? I used Firewater and weaksauce on mine. Or are you saying that once you flash the zip it takes over what weaksauce was doing?
I wonder why so many ROMs flashed properly for months now and it's just recently with these GPE Roms I'm seeing all this trouble.
---------- Post added at 07:14 PM ---------- Previous post was at 06:57 PM ----------
Well, I found it and flashed it so I guess we'll see if that was the problem. Got it off of Chainfires site.
Click to expand...
Click to collapse
Yeah, get rid of weak sauce app and flash SuperSU zip. Let me know if that fixes your problem. That would be an easy fix!

silver04v said:
Yeah, get rid of weak sauce app and flash SuperSU zip. Let me know if that fixes your problem. That would be an easy fix!
Click to expand...
Click to collapse
I dont have a weaksauce app???? I used a weaksause zip with ADB when rooting the device??

Duckman_UF said:
I dont have a weaksauce app???? I used a weaksause zip with ADB when rooting the device??
Click to expand...
Click to collapse
Oh, never mind then..I used the app way when I did mine. Let's see if you can flash a rom now! Haha

silver04v said:
Oh, never mind then..I used the app way when I did mine. Let's see if you can flash a rom now! Haha
Click to expand...
Click to collapse
lol....BRB!
---------- Post added at 07:38 PM ---------- Previous post was at 07:30 PM ----------
Duckman_UF said:
lol....BRB!
Click to expand...
Click to collapse
Nope...no such luck. One thing I forgot about is all these ROM's Root the device just before installing the kernal. Mines doung the same thing it always does on this one and Cleanrom....stck on "Trimming File system"....It will fail eventually.

Duckman_UF said:
lol....BRB!
---------- Post added at 07:38 PM ---------- Previous post was at 07:30 PM ----------
Nope...no such luck. One thing I forgot about is all these ROM's Root the device just before installing the kernal. Mines doung the same thing it always does on this one and Cleanrom....stck on "Trimming File system"....It will fail eventually.
Click to expand...
Click to collapse
Hmm.. That's true. So you can't even flash clean rom? Can you get anything flashed? Maybe try and fastboot flash twrp again. Or a different version of twrp than you have now?

silver04v said:
Hmm.. That's true. So you can't even flash clean rom? Can you get anything flashed? Maybe try and fastboot flash twrp again. Or a different version of twrp than you have now?
Click to expand...
Click to collapse
Take a look at my thread in this section and you'll see what ive been through
---------- Post added at 08:07 PM ---------- Previous post was at 08:02 PM ----------
Duckman_UF said:
Take a look at my thread in this section and you'll see what ive been through
Click to expand...
Click to collapse
It's weird. I have Nu Sense up and running but Ive lost Root again just as I did earlier today but everything that doesnt need Root is working. When this happens I never get an "Install complete" it just hangs on Trimming system files then eventually shuts off. I cant seem to get the binaries installed for SuperSU either.

Duckman_UF said:
Take a look at my thread in this section and you'll see what ive been through
---------- Post added at 08:07 PM ---------- Previous post was at 08:02 PM ----------
It's weird. I have Nu Sense up and running but Ive lost Root again just as I did earlier today but everything that doesnt need Root is working. When this happens I never get an "Install complete" it just hangs on Trimming system files then eventually shuts off. I cant seem to get the binaries installed for SuperSU either.
Click to expand...
Click to collapse
Flash the SuperSU.zip via recovery and you'll have root again!
Sent from my HTC One_M8 using XDA Premium 4 mobile app

mashk said:
Flash the SuperSU.zip via recovery and you'll have root again!
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not, install is corrupt.....You would have to read my entire thread to get an idea of all the BS i have going on lol! I'm sticking with AOSP right now until I figure out what's going on.

Duckman_UF said:
Unfortunately not, install is corrupt.....You would have to read my entire thread to get an idea of all the BS i have going on lol! I'm sticking with AOSP right now until I figure out what's going on.
Click to expand...
Click to collapse
Link?

mashk said:
Link?
Click to expand...
Click to collapse
One post up lol!
http://forum.xda-developers.com/verizon-htc-one-m8/help/flashing-problems-t2834991

OTA for 4.4.4

nice time for androidfilehost to be unreachable... i did post the firmware up. RUU and OTApkg.zip are ready for upload.
FYI guys/gals.. there's a new hboot on this one too.
Edit..uploading now

I am unlocked and rooted but the download from verizon automatically started. It did nothing after it was done downloading. I dont know what to expect of this?? I am on viper rom 2.5.

Here's the link folks
https://www.androidfilehost.com/?fid=95747613655049317
Only for stock recovery and untouched system users

dottat said:
Here's the link folks
https://www.androidfilehost.com/?fid=95747613655049317
Only for stock recovery and untouched system users
Click to expand...
Click to collapse
Hey dottat what is the correct directory that the file gets saved to on the phone?

lucky_strike33 said:
I am unlocked and rooted but the download from verizon automatically started. It did nothing after it was done downloading. I dont know what to expect of this?? I am on viper rom 2.5.
Click to expand...
Click to collapse
Won't flash if you have custom recovery or modified system.

krazie1 said:
Hey dottat what is the correct directory that the file gets saved to on the phone?
Click to expand...
Click to collapse
/cache/fumo

dottat said:
Won't flash if you have custom recovery or modified system.
Click to expand...
Click to collapse
Thank you!
Sent from my HTC6525LVW using XDA Premium HD app

Is there a full change log somewhere?

all good here, just reflashed @dottats RUU and updated the organic way. SOFF is good, it even says official in the software status in HBOOT
hboot- 3.19.0.0000
radio- 1.09.20.0926
dsp - v46.2.2-00564-m8974_F0.0811
os- 3.28.605.4

dottat said:
nice time for androidfilehost to be unreachable... i did post the firmware up. RUU and OTApkg.zip are ready for upload.
FYI guys/gals.. there's a new hboot on this one too.
Edit..uploading now
Click to expand...
Click to collapse
Ready for that RUU.... It saved me 1,000 million times...

JB_Da_Greatest said:
Ready for that RUU.... It saved me 1,000 million times...
Click to expand...
Click to collapse
You can just use the 4.4.3 ruu and do the OTA, then your firmware is done all in 1 shot

can someone upload a 4.4.4 system dump? or point me to one if someone has already? thanks!

I have looked around and found all kinds of different answers so can someone here help me out a bit?
I got the phone when it first came out, have S-OFF, root, TWRP custom recovery but have version 4.4.2 still installed with everything being left pretty much stock. I would prefer to keep things pretty much stock so what would I need to do to update to 4.4.4? Do I need to get 4.4.3 first? Do I need to flash stock recovery first before doing anything? Anything with firmware or radios?

Resputan said:
I have looked around and found all kinds of different answers so can someone here help me out a bit?
I got the phone when it first came out, have S-OFF, root, TWRP custom recovery but have version 4.4.2 still installed with everything being left pretty much stock. I would prefer to keep things pretty much stock so what would I need to do to update to 4.4.4? Do I need to get 4.4.3 first? Do I need to flash stock recovery first before doing anything? Anything with firmware or radios?
Click to expand...
Click to collapse
well, this is my idea for you
1. Flash the stock 4.4.2 recovery over the TWRP, then just do the OTA's

aer0zer0 said:
well, this is my idea for you
1. Flash the stock 4.4.2 recovery over the TWRP, then just do the OTA's
Click to expand...
Click to collapse
Reasonable enough, sorry if this is another dumb question but I havent been paying much attention to these boards since I rooted, I see that recent phones require Sunshine to root, is that because of the firewater method being patched via a software update (4.4.3?) or some other manufacturer change that I shouldnt be concerned with if the old root method already works for me?

aer0zer0 said:
You can just use the 4.4.3 ruu and do the OTA, then your firmware is done all in 1 shot
Click to expand...
Click to collapse
I already updated... I was just saying for safe keeping just in case I get in some unforseen trouble.

Go here http://forum.xda-developers.com/showthread.php?t=2723159 and just flash the 4.4.3 with not boot img. YOu dont need to flash the recovery to accept ota's. YOu can just flash this and you will get the updated radios and h boot.http://forum.xda-developers.com/showthread.php?t=2723159

Downloaded OTA and updated, they added file manager and flashlight back ~!

JB_Da_Greatest said:
I already updated... I was just saying for safe keeping just in case I get in some unforseen trouble.
Click to expand...
Click to collapse
yup, its saved a billion times too
---------- Post added at 02:17 PM ---------- Previous post was at 02:16 PM ----------
lchupacabras said:
Downloaded OTA and updated, they added file manager and flashlight back ~!
Click to expand...
Click to collapse
i know, right that was such an awesome surprise
---------- Post added at 02:18 PM ---------- Previous post was at 02:17 PM ----------
Resputan said:
Reasonable enough, sorry if this is another dumb question but I havent been paying much attention to these boards since I rooted, I see that recent phones require Sunshine to root, is that because of the firewater method being patched via a software update (4.4.3?) or some other manufacturer change that I shouldnt be concerned with if the old root method already works for me?
Click to expand...
Click to collapse
nope, if your already SOFF, you will stay SOFF. might break your root, but all you need to do is reinstall supersu when you put twrp back on

dottat said:
nice time for androidfilehost to be unreachable... i did post the firmware up. RUU and OTApkg.zip are ready for upload.
FYI guys/gals.. there's a new hboot on this one too.
Edit..uploading now
Click to expand...
Click to collapse
Hi dootat, Hope you remember me. You help me restore my mobile Via team viewer. Thanks for the RUU i am trying to flash but nothing going. Copy zip to SD card rename to 0p6bimg.zip and hit Hboot. i can see it installing and then ask for reboot but when check in mobile still 4.4.3. Any help?
thanks
Best regards

Nexus 5 with "TeamWin" failed update - and won't start again

Hello everyone.
Two hours ago I received the notification about the Android 5.0 update. I downloaded it and hit "Install". Then, "TeamWin" started, but not the update. I rebooted into System and tried to update again - but it tells me that 4.4.4 is the latest version I can get now. I'm on Build KTU84P now.
1) Do I need to remove TeamWin? If yes, with what?
2) How can I start the update again? I'm on a super slow connection and it would hurt to download the 500 MB again…
Thank you!

Fablus said:
Hello everyone.
Two hours ago I received the notification about the Android 5.0 update. I downloaded it and hit "Install". Then, "TeamWin" started, but not the update. I rebooted into System and tried to update again - but it tells me that 4.4.4 is the latest version I can get now. I'm on Build KTU84P now.
1) Do I need to remove TeamWin? If yes, with what?
2) How can I start the update again? I'm on a super slow connection and it would hurt to download the 500 MB again…
Thank you!
Click to expand...
Click to collapse
You need to remove TeamWin, and load up your stock recovery. I don't have the exact instructions for this unfortunately.
The OTA update will come back to your phone soon, usually. Did for me within the hour.
The issue I am having now, back with stock recovery, is during the install I am getting a dead Android error icon, and can't continue. Looking for any help I can, and hopefully it will help you too.

Mysticodex said:
You need to remove TeamWin, and load up your stock recovery. I don't have the exact instructions for this unfortunately.
The OTA update will come back to your phone soon, usually. Did for me within the hour.
The issue I am having now, back with stock recovery, is during the install I am getting a dead Android error icon, and can't continue. Looking for any help I can, and hopefully it will help you too.
Click to expand...
Click to collapse
Maybe we need http://forum.xda-developers.com/google-nexus-5/general/stock-checker-zip-prepare-ota-t2927865?
Gosh, this used to be so easy all the time.

if you are using twrp, why the heck are you trying to install the ota? why not download(from xda) and flash a recovery flashable stock or aosp build, and make life much easier for yourself? heck, i dirty flashed from 444 to 5.0 via an aosp flashable zip without any issues, and kept all my data.

simms22 said:
if you are using twrp, why the heck are you trying to install the ota? why not download(from xda) and flash a recovery flashable stock or aosp build, and make life much easier for yourself? heck, i dirty flashed from 444 to 5.0 via an aosp flashable zip without any issues, and kept all my data.
Click to expand...
Click to collapse
I've read http://forum.xda-developers.com/goo...-android-4-4-3-ktu84m-rooted-busybox-t2557523 and it clearly states
-Do a factory reset (maybe you can keep data coming from STOCK 4.4.4 - maybe)
Click to expand...
Click to collapse
And I didn't want to count on a maybe.

I'm using stock recovery, rooted as per normal, and a custom kernal. OTA is giving an Android dead error, with no text. Trying to figure out how to diagnose this.

Fablus said:
I've read http://forum.xda-developers.com/goo...-android-4-4-3-ktu84m-rooted-busybox-t2557523 and it clearly states
Click to expand...
Click to collapse
it clearly states what? to use recovery version 2.8+? i used an older version, twrp version 2.6.2.4. what else?
---------- Post added at 05:51 PM ---------- Previous post was at 05:48 PM ----------
Mysticodex said:
I'm using stock recovery, rooted as per normal, and a custom kernal. OTA is giving an Android dead error, with no text. Trying to figure out how to diagnose this.
Click to expand...
Click to collapse
it wont flash over a rooted rom anymore as of lollipop. you can flash the factory img via fastboot though, in your bootloader.

simms22 said:
it clearly states what? to use recovery version 2.8+? i used an older version, twrp version 2.6.2.4. what else?
---------- Post added at 05:51 PM ---------- Previous post was at 05:48 PM ----------
it wont flash over a rooted rom anymore as of lollipop. you can flash the factory img via fastboot though, in your bootloader.
Click to expand...
Click to collapse
Trying to remove the root right now via SuperSU. I am hopeful it will work better afterwards.
Edit: SuperSU unrooted it, rebooted, did OTA again, error again. Is there no way to find out what this error is?