Related
i just bought the tmobile galaxy s 2 and was trying to root it. obviously i did something wrong and now its stuck on a black screen. and when i plug it into the usb it looks for driver QHSYSB_DLOAD. ive tried everything someone please help
I think all you really need to do is just download Kies for the drivers your looking for. I did a similar thing on my droid 2 and I've found that pushing from your computer to your device works well.
I can't post any links on my first post so I can't give you a direct link.
Just google "download kies samsung galaxy s2" and the link for DKSZone should be one of the first.
Also, next time you attempt to root the phone, make sure you have done all the latest firmware updates.
my computer wont recognize my phone. and i cant put it into recovery. i cant do anything with it
Can you put it into the stock bootloader?
nope its just a black screen. ive tried removing the battery, putting it back in, holding both arrow keys and plugging in my usb. still just a black screen. everytime i plug in the usb it says installing driver QHSYSB_DLOAD. then it fails and says "device driver was not successfully installed"
i will PAY someone if they can fix my phone
Ok, this is of no immediate help on your problem, but did you try asking help in the Galaxy S II section ?
Some people rarely check the general Android section and prefer to stick to their device's section.
Sent from my Desire HD using xda premium
oh dang i didnt even know there was a galaxy s II section, thank you for that i will repost there
I tried running Odin to unbrick back into recovery, but apparently didn't have the drivers installed (to my surprise). I hate to say it but I think I've reached the point of no return...any help would be very much appreciated.
Edit: I can't even get into dl mode and I don't have the samsung logo on the screen anymore...just a phone and computer logo.
May be you are not in dowload mode correctly.
For download mode:
1. remove battery
2. connect phone to computer
3. put battery
4. press volume up and down buttons only (no power button)
Try these steps, hope its helpful.
As far as the driver issue is concerned, downloading "Kies" is the easiest way. The phone doesn't actually work with the software, but the process of installing it will take care of any driver issues.
Search Kies in google to grab the download.
Try one click unbrick ^^ it work on mine
Sent from my SAMSUNG-SGH-I997 using xda premium
terr_bear said:
I tried running Odin to unbrick back into recovery, but apparently didn't have the drivers installed (to my surprise). I hate to say it but I think I've reached the point of no return...any help would be very much appreciated.
Edit: I can't even get into dl mode and I don't have the samsung logo on the screen anymore...just a phone and computer logo.
Click to expand...
Click to collapse
That is a download mode. It's just your Infuse saying man, something ain't right and I ain't going no farther.
Just install the samsung drivers, plug the phone in, let the drivers install and then run Odin.
atrix4nag said:
May be you are not in dowload mode correctly.
For download mode:
1. remove battery
2. connect phone to computer
3. put battery
4. press volume up and down buttons only (no power button)
Try these steps, hope its helpful.
Click to expand...
Click to collapse
According to your directions, I did it correctly...I was at a point where I could get into download mode, but I can't anymore...?
Zaidin said:
As far as the driver issue is concerned, downloading "Kies" is the easiest way. The phone doesn't actually work with the software, but the process of installing it will take care of any driver issues.
Search Kies in google to grab the download.
Click to expand...
Click to collapse
Downloaded kies to my computer...when I synced up it couldn't identify the device. I did a good amount of research before posting here...nothing seems to work
abcvn said:
Try one click unbrick ^^ it work on mine
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I'll give that a shot and let you know how it goes...thanks man
Truckerglenn said:
That is a download mode. It's just your Infuse saying man, something ain't right and I ain't going no farther.
Just install the samsung drivers, plug the phone in, let the drivers install and then run Odin.
Click to expand...
Click to collapse
That's the thing...odin would be a breeze, but I just can't get the right drivers for odin to id it...so I guess my solution would be to get kies to id my phone so I could dl the drivers and run odin, right? Easier said than done I suppose...
Thanks for the feedback guys, I really do appreciate it...
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
nygfan760 said:
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
Click to expand...
Click to collapse
Thanks, I'll give that a try too...
nygfan760 said:
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
Click to expand...
Click to collapse
So I shouldn't sync my phone to get drivers via kies?
terr_bear said:
So I shouldn't sync my phone to get drivers via kies?
Click to expand...
Click to collapse
No, the program itself can install them without the phone, at least kies mini will. Or you can just download the driver from here:
32 bit drivers: http://www.mediafire.com/?0b45zo7o75rc5d5
64 bit drivers: http://www.mediafire.com/?3dh4d6up72me9re
It said I successfully dl'ed the drivers, yet nothing has changed...used kies mini, restarted my comp, and tried to sync, but it still can't recognize the phone...hate to admit it, but I think I've exhausted just about every solution I could find or think of :/
get rid of kies. it's a useless program. also if it's open odin might not work, even if it's open in the background like in the system tray.
the drivers are in the most logical place you could think of. on the samsung website under device support.
http://org.downloadcenter.samsung.c...445/SGH-i997_Infuse4G_USB_Drivers_5_2_0_2.zip
http://www.samsung.com/us/support/downloads/at-t/SGH-I997ZKAATT
use the samsung cable if possible, others should work but on the older moment/intercept style phones a specific cable seems to be required. it couldn't hurt to make sure you have the correct cable.
even if you have the phone + computer screen it doesnt automatically mean you are in download mode. you may still need to do the download mode proceedure from battery pull (to make 100% sure the phone is off before you start the proceedure)
the best way is to
1 open odin
2 pull battery
3 connect the cable
4 phone should be face down
5 hold the volume buttons at the same time
6 with volume buttons depressed slide the battery into place
now you may see dwnload or you may see phone + computer or you may even see a black screen but there is a good chance that if the drivers worked that you will see a yellow box in odin
good luck
terr_bear said:
It said I successfully dl'ed the drivers, yet nothing has changed...used kies mini, restarted my comp, and tried to sync, but it still can't recognize the phone...hate to admit it, but I think I've exhausted just about every solution I could find or think of :/
Click to expand...
Click to collapse
Read what was said. Install drivers, close kies, reboot, open Odin.
Cranky...
KK4
Truckerglenn said:
Read what was said. Install drivers, close kies, reboot, open Odin.
Cranky...
KK4
Click to expand...
Click to collapse
I have tried everything, and windows 7 says the drivers are in place, but nothing happens! Trying heimdale, nothing is happeneing either.
Ryanscool said:
I have tried everything, and windows 7 says the drivers are in place, but nothing happens! Trying heimdale, nothing is happeneing either.
Click to expand...
Click to collapse
Heimdall uses completely different drivers which are installed via the one click heimdall using zadig.exe
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
If you can get to download mode, you are not bricked, and it is an issue on your part.
nygfan760 said:
Heimdall uses completely different drivers which are installed via the one click heimdall using zadig.exe
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
If you can get to download mode, you are not bricked, and it is an issue on your part.
Click to expand...
Click to collapse
I can not get anywhere, but i am installing the 64 bit drivers as im running win 7 64. I will try again, but for anyone else who has no other options and a tiny bit of cash there is some hope http://mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-jtag-brick-repair/ . Suprisingly, this is not a scam as many, many people say it worked for them.
Ryanscool said:
I can not get anywhere, but i am installing the 64 bit drivers as im running win 7 64. I will try again, but for anyone else who has no other options and a tiny bit of cash there is some hope http://mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-jtag-brick-repair/ . Suprisingly, this is not a scam as many, many people say it worked for them.
Click to expand...
Click to collapse
Get UnBrickable mod. That works well. I use it whenever I put my device into download mode. Just send me a pm and ill do it for $30+shipping. UBM lets you upload download mode to a device regardless of its state. I spent alot of time researching the methods and I came up with the mod for this device not too long ago.
UBM is the best option. Here is a demo on a captivate. We rewrote the HIBL for compatibility with the infuse4g
Thanks for all the help guys, but absolutely nothing I tried was working and I was short on time and patience...so you gave in to the JTAG unbrick service. I couldn't stand to pay for a service that I was sure I could perform myself, but when it got down to it, I didn't have time to deal with I all. I can confirm that it is a legit service. Great communication and Josh does quick work of getting things working again...I'm a firm supporter of DIY, but if you do reach the point of no return like I did, it's a very reliable resource.
terr_bear said:
Thanks for all the help guys, but absolutely nothing I tried was working and I was short on time and patience...so you gave in to the JTAG unbrick service. I couldn't stand to pay for a service that I was sure I could perform myself, but when it got down to it, I didn't have time to deal with I all. I can confirm that it is a legit service. Great communication and Josh does quick work of getting things working again...I'm a firm supporter of DIY, but if you do reach the point of no return like I did, it's a very reliable resource.
Click to expand...
Click to collapse
I have a suggestion. I also had this issue. The problem was my main PC. I simply used my old laptop and it worked like a dream. I know thus seems too simple but it has worked for several people.
Use GTGs Ultimate Unbrick on a different computer.
Just my 2ยข
Alright so recently.... i wanted to root my Samsung Galaxy S 4g i fount out about odin.... then i found out about connecting it with stock kernels. and thats exactly waht i did. i opened odin and put my phone into download mode and i put a stock kernel uploaded from a user(ChainFire).I used his CF-Root-XX_OXA_JVK-v2.4-CWM3RFS kernel and put it into my device when it said PASS i was glad it worked..... excpet every time i turn it on now it gets stuck on the Samsung Galaxy S 4G SCREEN. SUCKS I TRIED USING DIFFRENT KERNELS AND ALL BUT NOTHING. Man if there is someone out there who could help plz HELP My mom would be so frieked when she found out i briked my phone.
PHONE INFO:
Model: SGH-T959V
Firmware: 2.2.1
Baseband: T959VUVKD1
Kernel: 2.6.32.9
Build Number: FROYO.VUVKD1
Follow this guide to a tea. When it says do I need to flash bootloader you will select yes. This will get you on gingerbread.
http://forum.xda-developers.com/showthread.php?t=1470716
thnx for the reply i will try this out when i get my new usb cable... for some reason other cables that look exactly the same that i own dont connect to my computer. I mean they charge and all but are NO GOOD FOR MASS STORAGE, PHONE MEDIA,TO ENTER DOWNLOAD MODE, etc. only for charging.
ALSO when i plug in my android to the pc using this USB cable it says "USB DEVICE NOT RECOGNIZED"
any more help plz....... i know u guys are tired of helping people with this sort of stuff, but come on thats what this site is for
Alaryze said:
any more help plz....... i know u guys are tired of helping people with this sort of stuff, but come on thats what this site is for
Click to expand...
Click to collapse
Actually this site is for learning about all things android. Not holding peoples hands that screw there phones. There is a ton of info on this site to help you. Think of it like going to the library. Sometimes the librarians busy and you have to find things for yourself. Look for the search feature and start using it.
hechoen said:
Actually this site is for learning about all things android. Not holding peoples hands that screw there phones. There is a ton of info on this site to help you. Think of it like going to the library. Sometimes the librarians busy and you have to find things for yourself. Look for the search feature and start using it.
Click to expand...
Click to collapse
so does that mean u got nothing. okay then im off to the search bar ill be visiting back here though cause the search bar might lead back to this topic XD
Alaryze said:
so does that mean u got nothing. okay then im off to the search bar ill be visiting back here though cause the search bar might lead back to this topic XD
Click to expand...
Click to collapse
Follow this to return your phone back to stock:
[Heimdall][One-Click] The T959V Heimdall One-Click Collection [05/20/2012]
In order to get into Download Mode, hold Vol-Up and Vol-Down while inserting the USB cord that is already plugged into your computer.
Then just click "flash", then when it's done, go back into download mode, check "flash bootloaders" on the computer, then click flash again.
You should be back to factory stock now.
cpkelley94 said:
Follow this to return your phone back to stock:
[Heimdall][One-Click] The T959V Heimdall One-Click Collection [05/20/2012]
In order to get into Download Mode, hold Vol-Up and Vol-Down while inserting the USB cord that is already plugged into your computer.
Then just click "flash", then when it's done, go back into download mode, check "flash bootloaders" on the computer, then click flash again.
You should be back to factory stock now.
Click to expand...
Click to collapse
thnx alot man but anyone know abou the usb problem. also when the USB DOES connect and gets signal, the phone dont reboot or anything sometimes usb composite device dont even appear in the list of all devices
If you still can get into download mode on the phone then it doesn't matter. The drivers get installed during the one-click process, just follow the directions when they come up.
Sent from my SGH-T959V using xda app-developers app
cpkelley94 said:
If you still can get into download mode on the phone then it doesn't matter. The drivers get installed during the one-click process, just follow the directions when they come up.
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
should it say ERROR Drivers not found before it says on the second line " installing drivers" on the heimdall screen?
samsung usb composite device dont appear, i get gadget serial. and yes i put list all devices
Alaryze said:
samsung usb composite device dont appear, i get gadget serial. and yes i put list all devices
Click to expand...
Click to collapse
Hmm...I've never seen that before. I'd ask someone with a little more experience than me.
So, instead of PM'ing me, lets keep the discussion here.
I would have chimed in, but I don't know crap about windows.
Sounds to me like a windows driver issue. If you plug your phone in and see something new in device manager, uninstall the drivers for that device. Rinse - wash - repeat, until you get "Unknown Device".
Then make sure you have the visual c++ redistributable (mentioned in the OP of the oneclick thread).
Then run the heimdall oneclick. It will ask to install the drivers. You may need to reboot the computer after installing the drivers for them to work properly.
If you still have problems, hopefully one of the windows nerds around here can help.
wow... ur saying this ir rare stuff.
man what have i done to my phone, maybe it is just a windows problem -_-
Alaryze said:
wow... ur saying this ir rare stuff.
man what have i done to my phone, maybe it is just a windows problem -_-
Click to expand...
Click to collapse
I don't think it's your phone. I think it's your computer.
bhundven said:
I don't think it's your phone. I think it's your computer.
Click to expand...
Click to collapse
yah then ill uninstall this unknown device that keeps popping up when i connect my phone, then ill install drivers from heindmall and restart my compu just like u said. lemme giv it a shot
alfrigt it says connected in heomdall looks like u just gotta unplug nd plug a couple of times even though in device manager it has a exclamation mark next to samsung usb composite device. so do i just flash now.....? then what i read the guide yes but its not workin for me. i really need a nother step by step (post by post) tutorial
flashed, runned zadig.... and in all devices i get gadget searial and samsung mobile modem (interface 0) this one was new
should i just give up now or is there actually a way to fix this .
Did you select other and find the other drivers listed?
eollie said:
Did you select other and find the other drivers listed?
Click to expand...
Click to collapse
how do u do that?
Hi, I've been looking to root/change the rom on my Samsung Galaxy Skyrocket for a while, but everytime I come onto the dev forums here for a guide to do it, I seem to get stuck in a circle.
I tried ODIN, and all the troubleshooting, but it doesn't work for me.
I went to the ODIN-less methods, but it seems that I already need to have CMW....on there?
I am quite confused, so I downloaded the file linked here: http://d-h.st/40A (cwm6011touch_INSTALL.zip)
..Then i tried to 'apply update from sdcard' with that file from recovery mode in my phone...and i get: 'E: signature verification failed'.
My issue is that the documents are pretty confusing to me, they seem circular. The ones i've been looking at are:
http://forum.xda-developers.com/showthread.php?t=1652398
http://forum.xda-developers.com/showthread.php?t=1773659
Can anyone explain what I have to do to be able to apply this(aokp jb) to my phone?
Honestly you must be too computer illiterate if you can't root a Samsung phone. Just don't bother lol
Sent from my SGH-I717 using xda premium
aceownstheworld said:
Honestly you must be too computer illiterate if you can't root a Samsung phone. Just don't bother lol
Sent from my SGH-I717 using xda premium
Click to expand...
Click to collapse
Helpful, bro. I'm pretty computer literate, i'd say. There's nothing wrong with needing help...does anyone have anything helpful to say?
Odin is the only way. You have to Odin the recovery on to your phone.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Everything you need is in or linked from this thread: http://forum.xda-developers.com/showthread.php?t=1652398
mindmajick said:
Odin is the only way. You have to Odin the recovery on to your phone.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
...Really? So I have absolutely no other options at all if ODIN doesn't recognize my phone?
Its weird because I don't think its a USB port issue. Windows recognizes it, but ODIN simply won't.
lawizeg said:
...Really? So I have absolutely no other options at all if ODIN doesn't recognize my phone?
Its weird because I don't think its a USB port issue. Windows recognizes it, but ODIN simply won't.
Click to expand...
Click to collapse
Not unless you are running stock 2.3.5
Otherwise.. yes Odin. Are you in download mode when using Odin?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
lawizeg said:
...Really? So I have absolutely no other options at all if ODIN doesn't recognize my phone?
Its weird because I don't think its a USB port issue. Windows recognizes it, but ODIN simply won't.
Click to expand...
Click to collapse
Did you run as administrator?
--------------------------------------------
Sent from my Skyrocket i727 running CM9
For a one stop shop are Vincom's threads
Everything Root: http://forum.xda-developers.com/showthread.php?t=1773659
Returning to Stock: http://forum.xda-developers.com/showthread.php?t=1652398
rpr69 said:
Everything you need is in or linked from this thread: http://forum.xda-developers.com/showthread.php?t=1652398
Click to expand...
Click to collapse
I used that, and yes, I ran ODIN as an admin, as well as have my phone in download mode while doing so.
what does the screen show when your in dl mode
if you didn't follow the troubleshooting guide in odin, theres no way we can help you, and yes you have to go through the whole troubleshooting procedure
if you thought my guides are hard to understand, then you are computer illiterate, stay away from jb and stick with stock until you do some further reading, allot more reading and understand what you are getting yourself into, read the last part of my sig, we dont want you to brick your phone as we do see newbs do that, we're not trying to be condescending, we're just telling you the way it is
vincom said:
what does the screen show when your in dl mode
if you didn't follow the troubleshooting guide in odin, theres no way we can help you, and yes you have to go through the whole troubleshooting procedure
if you thought my guides are hard to understand, then you are computer illiterate, stay away from jb and stick with stock until you do some further reading, allot more reading and understand what you are getting yourself into, read the last part of my sig, we dont want you to brick your phone as we do see newbs do that, we're not trying to be condescending, we're just telling you the way it is
Click to expand...
Click to collapse
The screen of what? The computer? Well, ODIN shows nothing, as in no change from when the phone wasn't in DL mode. And the screen of my phone says: ODIN MODE, blah blah....then it has the Android bot and DOWNLOAD MODE with a warning.
I did indeed go through the whole procedure, i said that. I also understand what i'm getting myself into; i've done stuff like this before. Yeah, i get the whole way it is thing...but you guys probably didn't even read what i said in the first post.
Listen. Its not the guides i don't understand, its how to get CWM onto my phone without using ODIN. They were circular, meaning when i had an issue, id get linked a post that led me to the post i was just at. I'm confused on what i need to do.
I'm not going to go into how NOT computer illiterate i am, I'm really just trying to figure out either how to get ODIN to recognize my phone, or get CWM on it without ODIN, which is what your guides don't have/i'm confused about. Writing me off isn't helping at all.
lawizeg said:
The screen of what? The computer? Well, ODIN shows nothing, as in no change from when the phone wasn't in DL mode. And the screen of my phone says: ODIN MODE, blah blah....then it has the Android bot and DOWNLOAD MODE with a warning.
I did indeed go through the whole procedure, i said that. I also understand what i'm getting myself into; i've done stuff like this before. Yeah, i get the whole way it is thing...but you guys probably didn't even read what i said in the first post.
Listen. Its not the guides i don't understand, its how to get CWM onto my phone without using ODIN. They were circular, meaning when i had an issue, id get linked a post that led me to the post i was just at. I'm confused on what i need to do.
I'm not going to go into how NOT computer illiterate i am, I'm really just trying to figure out either how to get ODIN to recognize my phone, or get CWM on it without ODIN, which is what your guides don't have/i'm confused about. Writing me off isn't helping at all.
Click to expand...
Click to collapse
k, sorry didnt understand
no theres no way to get a custom revovery on a stock phone w/out odin as my guide states
did u go through the exact procedure on getting into dl mode, if you could post a pic of the phone when in dl mode that would be helpful
did u go through the odin troubleshooting section in my stickies, you really need to do that b4 we can pinpoint the prob
vincom said:
k, sorry didnt understand
no theres no way to get a custom revovery on a stock phone w/out odin as my guide states
did u go through the exact procedure on getting into dl mode, if you could post a pic of the phone when in dl mode that would be helpful
did u go through the odin troubleshooting section in my stickies, you really need to do that b4 we can pinpoint the prob
Click to expand...
Click to collapse
Gah...darn it. Okay...well I just downloaded Kies to check for the driver issues in a different way, but here's everything i've done in the troubleshooting guide:
If Odin Shows An md5 Error: Unzip The Firmware Tar File Again And/Or Redownload The File Again
If The Phone Boots Into Any Rom, Make Sure Windows Can Transfer From And To Internal And External Sdcards To Rule Out Driver Issues
Does Kies Recognize Your Phone, Even If You Are On A Custom Rom Kies Will Recognize Your Phone, This Rules Out Driver Issues
Make Sure You Are In Download Mode On Your Phone
Make Sure Adb Or Kies Is Not Runnung In The Background
Restart Computer
Make Sure Battery Is Charged
Try Different Usb Port, Preferably The Rear Ones On Computer
Use Original Samsung Usb Cable, Or Try Different Cable But Still Oem
Uninstall drivers and kies, unplug phone & reboot comp, then just reinstall the USB Drivers from here
Try A Different Computer
Clean Phones Usb Port W/no Battery Installed
If You Tried All Of Above Tests And Phone Is Not Recognized By Your Computer You Then Have A Hardware Problem With The Phones Usb Port, Repair.
not an issue: If Phone Boot Loops Or Enters Into Recovery Mode While Trying To Get Into Download Mode(and you are sure you followed above procedure and also did not touch the power button), You Could Have A Stuck Power Button. To Fix That Try To Repeatedly Keep Pushing The Power Button Hard To Try To Unstick It.
u just copied and pasted my ts guide, but i need to know specifics, when you are booted up into android os, does windows see both sdcards and you can transfer files to and from phone and comp
vincom said:
u just copied and pasted my ts guide, but i need to know specifics, when you are booted up into android os, does windows see both sdcards and you can transfer files to and from phone and comp
Click to expand...
Click to collapse
Yes, I can transfer from and to both phone and SD. What do you mean by when I'm booted into android? I usually try something on the ts guide, and then try Odin...then I boot my phone into dl mode. Whenever Im trying to see if the phone is being detected its in Android is. Otherwise I turn it off.
I dunno.. if you are doing everything in the troubleshooting guide.. it should work.
There is no hardware OR software reason from what you have described that would prevent it from working.
The only other thing I can think of is the Odin version...
Well somethings not right, either your on the first screen in DL mode the one with yellow triangle and then u hit the volume up button to get into the second screen for DL mode(Odin mode), did u follow the guide in getting into DL mode.
Make sure kies (anything with word kies) is not running in the background in windows.
does kies recognize your phone
Posted w/xda app w/ i727R
MY STICKIES
| ROMS | KERNELS | FIRMWARE | RADIOS | HOWTO'S | GUIDES | INFo |
NEWB GUIDES TO: RESTORE TO STOCK | USE ODIN | INSTALL CWM | ROOT |
lawizeg said:
Hi, I've been looking to root/change the rom on my Samsung Galaxy Skyrocket for a while, but everytime I come onto the dev forums here for a guide to do it, I seem to get stuck in a circle.
I tried ODIN, and all the troubleshooting, but it doesn't work for me.
I went to the ODIN-less methods, but it seems that I already need to have CMW....on there?
I am quite confused, so I downloaded the file linked here: http://d-h.st/40A (cwm6011touch_INSTALL.zip)
..Then i tried to 'apply update from sdcard' with that file from recovery mode in my phone...and i get: 'E: signature verification failed'.
My issue is that the documents are pretty confusing to me, they seem circular. The ones i've been looking at are:
http://forum.xda-developers.com/showthread.php?t=1652398
http://forum.xda-developers.com/showthread.php?t=1773659
Can anyone explain what I have to do to be able to apply this(aokp jb) to my phone?
Click to expand...
Click to collapse
Alright, I did the driver thing again. (uninstalled Kies AND driver, then reinstalled driver) Then I tried it again, and ODIN worked! So, right now I'm waiting for the AOKP JB rom to finish loading up.
Thanks for the help.
lawizeg said:
Alright, I did the driver thing again. (uninstalled Kies AND driver, then reinstalled driver) Then I tried it again, and ODIN worked! So, right now I'm waiting for the AOKP JB rom to finish loading up.
Thanks for the help.
Click to expand...
Click to collapse
make sure you have the CWM touch version. The non-touch version didn't work for me.
eodee said:
make sure you have the CWM touch version. The non-touch version didn't work for me.
Click to expand...
Click to collapse
You MUST have a NATIVE Skyrocket recovery for the JB roms... Update the one that Odin loaded to one of these:
http://forum.xda-developers.com/showthread.php?t=1777970 (Touch)
http://d-h.st/eHq (Non Touch)
I have Samsung Galaxt Tab 2 7". Yesterday to install custom firmware, I flashed some wrong recovery on it.
Now, when I turn it on it is stuck on Samsung Initial boot logo and stays there as long as possible.
If I turn it off and bring it to download mode (Press and Hold Power and Down Volume Key), it comes into download more but when connected to PC, it says USB Device Not Recognized.
I tried charging my Tab whole night, it became warm and till morning it was warm only. Now I am completely stuck and don't know what to do.
Is there any solution for this? Is there any button combination which can take the tab at-least to stock android?
Since USB is not been recognized, so I am helpless to do anything here.
Sent from my RM-917_nam_usa_100 using XDA Windows Phone 7 App
anshumangoyal said:
I have Samsung Galaxt Tab 2 7". Yesterday to install custom firmware, I flashed some wrong recovery on it.
Now, when I turn it on it is stuck on Samsung Initial boot logo and stays there as long as possible.
If I turn it off and bring it to download mode (Press and Hold Power and Down Volume Key), it comes into download more but when connected to PC, it says USB Device Not Recognized.
I tried charging my Tab whole night, it became warm and till morning it was warm only. Now I am completely stuck and don't know what to do.
Is there any solution for this? Is there any button combination which can take the tab at-least to stock android?
Since USB is not been recognized, so I am helpless to do anything here.
Click to expand...
Click to collapse
Hm, Odin needs Samsung USB Drivers to be able to recognize device, did you already install them?
If not, you can download it here.
(If you're using Windows 8, tell me, because you will need some special method to install the drivers.)
fr4n said:
Hm, Odin needs Samsung USB Drivers to be able to recognize device, did you already install them?
If not, you can download it here.
(If you're using Windows 8, tell me, because you will need some special method to install the drivers.)
Click to expand...
Click to collapse
Thanks, I have tried and it is the same. Yes, I am using Windows 8. Please let me know what special things needs to be done with this.
Thanks again. Your English is better than me, though it is also not my first language :laugh:
anshumangoyal said:
Thanks, I have tried and it is the same. Yes, I am using Windows 8. Please let me know what special things needs to be done with this.
Thanks again. Your English is better than me, though it is also not my first language :laugh:
Click to expand...
Click to collapse
I bet you tried to run the .exe file and the installation didn't even start, no? xD
Follow installation method 3 explained in this thread.
If you can't do it, let me know and I can help you!
I'm not pretty good with English too... I know only basic skills, but I bet I can't go to English-speaking countries with them :laugh:
fr4n said:
I bet you tried to run the .exe file and the installation didn't even start, no? xD
Follow installation method 3 explained in this thread.
If you can't do it, let me know and I can help you!
I'm not pretty good with English too... I know only basic skills, but I bet I can't go to English-speaking countries with them :laugh:
Click to expand...
Click to collapse
I followed all steps. But still I am getting my USB Device is not been recognized. It is showing "Unknown USB Device (Device Descriptor Request Failed)"
Till now I am unable to find any solution.
anshumangoyal said:
I followed all steps. But still I am getting my USB Device is not been recognized. It is showing "Unknown USB Device (Device Descriptor Request Failed)"
Till now I am unable to find any solution.
Click to expand...
Click to collapse
Hm, that was totally unexpected.
I hope I'm wrong, but it sounds like your board got damaged. But if the board was damaged, it won't ever turn on. So my mind is a bit twisted here.
I will try to look for solutions. For now, you're stuck with a paperweight :s
anshumangoyal said:
I followed all steps. But still I am getting my USB Device is not been recognized. It is showing "Unknown USB Device (Device Descriptor Request Failed)"
Till now I am unable to find any solution.
Click to expand...
Click to collapse
Do you have a Linux computer? Of you do, PM me and I will send you instructions that you can try to follow.
Sent from my SGH-T989
jrc2 said:
Do you have a Linux computer? Of you do, PM me and I will send you instructions that you can try to follow.
Sent from my SGH-T989
Click to expand...
Click to collapse
I don't have a linux computer. But I can install a virtual machine for that. Can you please send me instructions how to do that. Thanks again.
anshumangoyal said:
I don't have a linux computer. But I can install a virtual machine for that. Can you please send me instructions how to do that. Thanks again.
Click to expand...
Click to collapse
Sorry, I must have missed this post. I don't know if a VM will work or not. I think the problem is windows 8 as there have been lots of problems reported with Odin and Heimdall (probably the drivers) on windows 8.
Sent from my SGH-T989 using Tapatalk
EDIT: I have a thread in the general section for the tab 2 on rooting in Linux. Do everything up until flashing SuperSU. That thread has the instructions on how to install recovery. Still do it with no reboot checked and manually boot into recovery and wipe cache and Dalvik cache. Hope this helps!
EDIT 2: Here is the link to the thread: http://forum.xda-developers.com/showthread.php?t=2828080