Hi there,
I'll have an Sony C2105 smart phone. The bootloader is successfuly unlocked. Then, I installed this on this device:
FXP320-cm-11-20140519-UNOFFICIAL-taoshan.zip and the Phantom-Kernel 8.
But the bluetooth and the cellphone works fine. Because the wifi will not work on this device. I'll try it to switch on - the switch stays in gray and nothing is happend. I can't serach for the wifi, but my wifi-router is on. Other devices find my wifi-network.
I'll made a complett wipe from the device.
Has anybody the same problem or solve this?
THX tiptel170
tiptel170 said:
Has anybody the same problem or solve this?
Click to expand...
Click to collapse
Did you update from 4.2.2 to FXP?
the 4.2.2 modem.sin is required on your device to make the WiFi work, this file is intergrated in all 4.2 FTF files.
If you already have upgraded from 4.2.2 to FXP and it still doesn't work, try the boot.img included with the FXP zip.
Joery360 said:
Did you update from 4.2.2 to FXP?
the 4.2.2 modem.sin is required on your device to make the WiFi work, this file is intergrated in all 4.2 FTF files.
If you already have upgraded from 4.2.2 to FXP and it still doesn't work, try the boot.img included with the FXP zip.
Click to expand...
Click to collapse
How has this device make to work with CM11?
Wich version of the CM11 / Kernel is installted for the Wifi?
Regarts tiptel170
Related
Hello,
I have a problem with updating my xperia J from version 11.0.A.3.22 to 11.0.A.7.5 through Sony PC Companion. There's error poping out which says I can't update because of using unofficial software, but I restored my official data after I installed CyanogenMod 10, and everything should be working. I've installed kernel, CWM and CM from here. I've tried to find official kernel but I couldn't find it, same with soft 7.5, so I'm stucked and have no idea what else I can do ;/ I'd be thankful for any help.
nereval said:
Hello,
I have a problem with updating my xperia J from version 11.0.A.3.22 to 11.0.A.7.5 through Sony PC Companion. There's error poping out which says I can't update because of using unofficial software, but I restored my official data after I installed CyanogenMod 10, and everything should be working. I've installed kernel, CWM and CM from here. I've tried to find official kernel but I couldn't find it, same with soft 7.5, so I'm stucked and have no idea what else I can do ;/ I'd be thankful for any help.
Click to expand...
Click to collapse
If you've unlocked your bootloader via Sony's website you can't update with pc companion. You need to flash the ftf firmware file with flashtool to get back to stock.
hallo!
Recently I rootED an xperia j.
I unlocked bootloader, then i flashed a boot.img file with flashtool and finally i installed a rom...
ALL worked perfectly but sim couldn't be recognised...
after ΤΗΑΤ, I installed two other rom... and again the same problem... can anyone help?
notis7 said:
hallo! Recently I root an xperia j. I flashed a boot.img file with flash tool, then i unlocked bootloader and finally i installed a rom... ALL worked perfectly but sim did't recognised... after I installed two others rom... and again the same problem... can anyone help? (Sr for my english)
Click to expand...
Click to collapse
Did you flash ICS 11.0.a.7.5 before installing cm10?
2010matej said:
Did you flash ICS 11.0.a.7.5 before installing cm10?
Click to expand...
Click to collapse
i flash ICS 11.0.A.3.28 cause i could not find ICS 11.0.a.7.5
Hi everyone. I`m dealing an issue with my tipo (st21a, my phone is rooted and with unlocked bootloader)
The first time I installed a new rom (fxp cm10) over my stock rom (11.0.A.4.22) via flashtool / cwm way and everything goes fine with jelly bean, but i found cm11 (kitkat for xperia tipo).
Later, I decided to change the rom and i installed tamsui cm11 rom over cm10 and was sucessful, but camera and video play back doesnt work in cm11 , so, I want to return to stock rom. (flashing ftf fie), so I`ve downloaded .22 and .27 stocks roms from xperifirm.
But when i turn off the phone and connect it to the usb via fastboot, pushing vol - repeteadly, led doesnt turn green (as usual). Instead, cwm appears on the screen and i cant proceed with flashing.
How can I do it? What should I delete Inside CWM? What should i do? How can i delete cwm?
Thanks in advance
Prepare Flashtool for flashing your ftf, PRESS AND HOLD VOLUME - connect the usb. Not pressing repeatedly.
Xperia M2 D2303 on K.K. 4.4.4
We´re back to stock
Oooh, it works! Now, I´m in stock ended in 11.0.A.4.27 (indian release) Thanks @Dzepar
So, i´m going to try other cooked roms based in ICS, JB or KK or lollipop (if exist) until I find a affordable and interesting rom for me or qdl mode appears (first that happens).
Fortunately and thanks for god, currently xperia tipo is not my primary device, but i will keep it in pretty shape as a secondary device!!!
Long live to tipo, tapioca!!
Hi, i update my xperia L to Android 4.4. and a i cant turn on Wifi. I flash kernel too. Now i install Android 5.0.2 and have the same problem. Some solution? (I know my english is bad.)
hofiman said:
Hi, i update my xperia L to Android 4.4. and a i cant turn on Wifi. I flash kernel too. Now i install Android 5.0.2 and have the same problem. Some solution? (I know my english is bad.)
Click to expand...
Click to collapse
Dear Newbie, Could you tell me the procedure of your flashing rom, kernel... Also how did you flashed kernel and what kernel did you flashed? I recommend you to use FlashTool for flashing kernels, if you used ThunderZap kernel lets assume that you extracted boot.img from TZ zip and flashed it... Then you probably didnt flashed the modules aka Thunderzap zip, so you should do it like this :
-Flash boot img via FlashTool
-Go into Recovery Flash ROM, Gapps, Kernel zip.
Regards and stay Fabulous :good:
hofiman said:
Hi, i update my xperia L to Android 4.4. and a i cant turn on Wifi. I flash kernel too. Now i install Android 5.0.2 and have the same problem. Some solution? (I know my english is bad.)
Click to expand...
Click to collapse
pls do (terminal)
su
getprop
show me
Sent from my C2105 using XDA Free mobile app
Hi everyone,
I ask your help because my phone don't start. He's looping on sony logo....
SO i made some search and i try to restaure my phone thank to flash tool and a tft for my D2305 but it made nothing.
There's something i don't understand, during my search i see that D2305 don't support 4G but my phone recieve 4G....
The probleme has appear since i force the install of CM12 on it so.
I don't find any rom to flash thanks to CWM and flashtools don't work , what to do ?
Sorry for my english...
So you have a tft file with your stock firmware?
To flash it do the following as explained here: forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614 .
You dont need any CWM to flash it. Just install the flashtool program on your pc and flash the tft. (Be sure to select wipe data and cache from the flashtool)
Only the D2303 is 4g the d2305 is only 3g and the ftf's are not cross compatible. If you flash the wrong one it could possibly brick your phone.
D2303 18.3.1.C.1.15 kk deodexed, rooted, philz touch recovery, xposed, z1 bravia engine 2 + x-reality+ z3 super vivid, viper audio
hi thank you, yes I have the good tft,
it's the 18.0.A.1.30 version for the D2305 ,global devices. It should work no ? (it shoudn't)
I do exactly what the tutorial say
EDIT for [email protected] :
I don't flash the wrong tft, i install a wrong zip through CWM (I do this removing the verification of the phone model in the instalation script).
k3rmito said:
hi thank you, yes I have the good tft,
it's the 18.0.A.1.30 version for the D2305 ,global devices. It should work no ? (it shoudn't)
I do exactly what the tutorial say
EDIT for [email protected] :
I don't flash the wrong tft, i install a wrong zip through CWM (I do this removing the verification of the phone model in the instalation script).
Click to expand...
Click to collapse
Phone model check is there for a reason. Any model other than D2303 and D2306 will bootloop on CM12.
Okay but my phone can't be a d2305,because it receive 4g
Just use PC Companion and recover the phone. It will flash the correct OS version for your model (which should appear in the application). Don't mess up with FTF files if you're not even sure what model it is.
Miche1asso said:
Just use PC Companion and recover the phone. It will flash the correct OS version for your model (which should appear in the application). Don't mess up with FTF files if you're not even sure what model it is.
Click to expand...
Click to collapse
Good idea but pc companion ask me to turn on my phone... :/
Okay I just flashed a D2303 FTF on my phone and it's working, I don't know why the **** it's think it were a D2305