Related
Hey guys I was having some problems with my xoom's wifi on Tiamat's 1.4.4 so i decided to relock the device and use stock.
It's a US model and had build HMJ37 but i decided to follow this thread
http://www.xoomforums.com/forum/mot...4600-thinking-about-unrooting-read-first.html
I downloaded img build HRI66 and followed all the steps and it was ok. Then, i rebooted and now my device is at the motorola logo's dual core screen. Everytime i manually reboot with power and volume up it automatically reboots the device instead of shutting it down, it literally won't shut down and keeps hanging at the moto logo. It just keeps rebooting and getting stuck at the motorola logo. I then unlocked again, and performed the same process with the HRI39 img and still got the same problem
So im stuck. Please help me out guys, i'm in serious ****.
So you have gone as far as the "fastboot erase cache" and "fastboot oem lock" right? This is kind of funny because I tried to install Tiamat 1.1 ROM tonight and ended up going through this HUGE loop of problems.
Here's the problem I had: some time ago I installed ROMManager from the market. I thought it would be easier. It SHOULD be easier. I let it update my recovery to its own version 4.something. It allowed me to SORT OF install the ROM, but I wound up with some persistent system files that weren't getting wiped and a bcm4329.ko version mismatch.
This stumped me for a long time because all I could see was an "Error" message where I was supposed to be able to toggle the wifi on and off. I tried rolling back to my previous ROM. No go. And the culprit the whole time was ROMManager's CWM.
I tried rolling back my recovery.img file to the Tiamat version recommended in this forum. I kept getting all of these crazy "could not mount" errors for pretty much EVERYTHING. I thought my recovery partition was effed. So I rolled back to stock. Followed pretty much the same instructions you linked to.
From there I was able to boot into the stock OS. WiFi worked. I breathed deeply for a minute or two then dove right back in.
If I was in your position I would (and I did, though not from a boot loop) boot into fastboot and unlock the bootloader again. You can do it by holding the Vol down key as the device boots. When fastboot loads type "fastboot oem unlock". Press the Vol down key then the Vol up key. Do that again. Your device is unlocked now! Hooray!
Now you need to install a recovery.img. (I just did this too.) Get the .img file here: http://forum.xda-developers.com/showthread.php?t=1074979
Boot into fastboot again. Put the recovery img file you downloaded into the same directory as your adb and fastboot executables (if you haven't already linked to them in your PATH). Type "fastboot flash recovery recovery-lotsofstuffhere.img". Type "fastboot reboot". 2 seconds after the Motorola logo pops up press the Vol Down key. Then press the Vol Up key to enter recovery.
Ok, here's where I found out what a dumbass I was. I got all of the stupid "can't mount anything" errors again. I thought, HOLY ****. I just did all of that work, spent hours troubleshooting and reformatting and bringing it back to stock and flashing the custom recovery all over again just to run into the SAME error. I really thought I was screwed. Then I found some forum where a guy was complaining about the same error. He realized he was getting it because his sd card was half-way out. I thought - "SD CARD?!?" Some guys told me I needed one earlier too, but the ROMManager CWM didn't require it. It just screwed up my system files. So I popped one in and rebooted. Voila. Everything's kosher. If YOU have the same problem, make sure you've got an SD card in.
Ok, so now you're in recovery. You'll need to flash an OS of course. If you haven't already got it, get Tiamat 1.1 rom. Put it on the sd card. Wipe data/factory reset. Install zip from sd card. You're golden. At least I was. 5 hours later.
-Mike
Hey Mike I'm gonna give this a go. Just when i downloaded the img file to flash through fastboot i got an error saying battery was too lower to perform the recovery....damn it! The xoom isn't able to charge at the moment so i have to wait until it dies i guess (or i hope at least) and then charge it up and try again later.
Thanks again dude, hope i sort this out too. I'll download tiamat 1.1 in the meantime.
DUDE YOU'RE MY ****ING HERO!!!! I got it running can't say if everything is 100% just yet but the fac tthat im back in is enough to thank you so very much Mike!!! What a guy!
It worked? Great that's excellent news. Just out of curiosity - did you get there because you had ROMManager's ClockWorkMod? Or maybe you didn't do a full wipe before flashing a new rom? Or maybe you restored some WiFi settings with Titanium Backup after a new flash? How did you wind up with tthe problem in the first place - you know, for posterity.
well to be honest i am not 100% sure. I think the source of the problem msut have come from my previous installation of tiamat's 1.4.4 rom, it was always actin up on me and i don't believe i wiped the mod before i updated it and that may have done it. I wish i could give you more than just a pseudo answer.
DeeJayCruiser said:
Hey Mike I'm gonna give this a go. Just when i downloaded the img file to flash through fastboot i got an error saying battery was too lower to perform the recovery....damn it! The xoom isn't able to charge at the moment so i have to wait until it dies i guess (or i hope at least) and then charge it up and try again later.
Thanks again dude, hope i sort this out too. I'll download tiamat 1.1 in the meantime.
Click to expand...
Click to collapse
This is why they say to make sure you're plugged in when doing this important stuff, lol.
okantomi said:
This is why they say to make sure you're plugged in when doing this important stuff, lol.
Click to expand...
Click to collapse
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
DeeJayCruiser said:
Everytime i manually reboot with power and volume up it automatically reboots the device instead of shutting it down, it literally won't shut down and keeps hanging at the moto logo.
Click to expand...
Click to collapse
farmsatguy said:
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
Click to expand...
Click to collapse
You are right...I had forgotten that from the OP. Very strange indeed.
Yeah I dunno why, my xoom was just acting up. It's fantastic now, albeit the wifi still has a couple kinks but android market issues have been resolved, i get much better streams and with tiamat 1.1 everything is already built in and with a quickboot option =)
Xda...where would i be without you!
farmsatguy said:
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
Click to expand...
Click to collapse
You should be able to reboot the device using vol up + power, then holding vol down and vol up until it says "Cold booting Linux.....".
This should do the same as letting the battery drain, plugging it in and turning it on.
DeeJay - dunno if you've done this already, but if you haven't you should go back to the Tiamat 1.1 thread and find the Modpack. It fixes the Market update issue and gives you built-in screenshot capabilities and an option to reboot into recovery from the power off menu. It's in there - you just have to scroll down a bit before you find it.
Also - what issues are you having with WiFi?
Thanks for that important tidbit, solarnz. I'm going to file it away for future use.
OMG!!!! Dude you just saved my life! I thought my baby was out the window. I had the exact same problem as you did. I was trying everything from every thread that had anything to do with this problem. I just finished installing and it booted. WHEWWW!!!
Thank u thank u thank u!!
Glad it helped. I'm seeing all kinds of posts in here about the ROMManager CWM. Not good.
Sent from my Xoom using Tapatalk
First I'd like to thank the mods and everyone who contributes to this forum. It's an invaluable resource. Now to my problem.
Asus Tf700 is unlocked and rooted on latest TWRP recovery, which does work. However, after making a backup with the new TWRP version, the tablet is stuck on the boot screen (spinning wheel). Last week I flashed a JB ROM, didn't like it, so went back to ICS with the .30 firmware. Flashed it using old version of TWRP from micro-SD card. Device has been working fine since then. I tried reflashing the .30 kernel again using the same method. It installs kernel, but no luck, still stuck on boot screen. Then I tried TWRP restore, using the new restore file. It restores, but goes to the boot screen and just spins. Any ideas? nvFlash is unavailable to me. What else can I do? Should I try a factory restore in TWRP? I'll keep messing with it later today, but any suggestions are appreciated.
When you install a stock rom, doesnt it install back the stock recovery? I would try reflashing twrp and installing cleanrom, keep it as stock as possible and see if it boots.
Sent from my ASUS Transformer Pad TF700T Infinity using Tapatalk HD
Rom: CleanRom 3.4.4
A spinning Asus wheel is always recoverable.
You have some incompatible rom / kernel / bootloader / data combination I suspect. It's easily done.
I'd make sure you are on a more recent version of TWRP - something like 2.3.1.0 or 2.3.3.0 that supports ICS and JB. It's very dangerous leaving such an old version of TWRP if you go to JB.....
Personally I'd update TWRP to 2.3.1.0 and then install the latest JB file from the Asus website to start with.
missiveusa said:
First I'd like to thank the mods and everyone who contributes to this forum. It's an invaluable resource. Now to my problem.
Asus Tf700 is unlocked and rooted on latest TWRP recovery, which does work. However, after making a backup with the new TWRP version, the tablet is stuck on the boot screen (spinning wheel). Last week I flashed a JB ROM, didn't like it, so went back to ICS with the .30 firmware. Flashed it using old version of TWRP from micro-SD card. Device has been working fine since then. I tried reflashing the .30 kernel again using the same method. It installs kernel, but no luck, still stuck on boot screen. Then I tried TWRP restore, using the new restore file. It restores, but goes to the boot screen and just spins. Any ideas? nvFlash is unavailable to me. What else can I do? Should I try a factory restore in TWRP? I'll keep messing with it later today, but any suggestions are appreciated.
Click to expand...
Click to collapse
1. What bootloader are you on currently? (See 4)
2. By flashing the ".30 kernel" I assume you mean flashing the .30 stock ROM, am I right?
Your device went into a hung boot after making the backup, so I'm not really surprised it does exactly the same when you restore that backup. Have you tried flashing .30 stock ROM again?
3. Which recovery do you currently have? As Tylorw1 said, if you flash a full stock ROM, you'll reflash everything, up to and including the bootloader and recovery.
4. If you still have fastboot available (pick the USB symbol instead of RCK after POWER+VOL_DOWNing), you might want to try to reflash either TWRP or CWM (http://forum.xda-developers.com/showthread.php?t=1926286 for the latter; I have VERY limited experience with the former and you may well have more than me ).
Updating your bootloader just to be sure is recommended, as most current ROMs will not boot properly without it.
Has the fiddling brought any new points of view, or new discoveries?
Update
Just got in from work. Of course can't do anything else but try to get this unworking device to boot. Not in panic mode yet, as I assume if I get to the spinning wheel, there is hope for recovery.
Just flashed back to the stock ROM, which indeed restored stock recovery. Still would not boot past Asus wheel. Now I will attempt to install the latest TWRP version using fastboot, then try to flash new ROM. Panic is slowly creeping in, but I think I just need to keep at it. How should I proceed once latest version of TWRP is installed? Backup? Flash? Android is new territory for me, a bit rockier than Windows. If this were a laptop on Windows 7 I'd be up and running already . Thanx for the replies and any help.
OK. I used stock recovery to to a system restore. That worked, but of course all user data and apps are gone. Assume root access is also history, so it's just a matter of getting root access and restoring apps. I made a backup to SD card using Titanium Backup. Can I restore from here using the backup file, or should I just stop complaining and be happy I got the damn thing to boot?!!! No big deal really: I'm back to STOCK .26, virgin device (except for being unlocked). Guess I'll get root and move on. Thanks. Great work here. I've learned a lot browsing these forums. Maybe one day I'll graduate from N00B status!
missiveusa said:
Just got in from work. Of course can't do anything else but try to get this unworking device to boot. Not in panic mode yet, as I assume if I get to the spinning wheel, there is hope for recovery.
Click to expand...
Click to collapse
Agreed.
Just flashed back to the stock ROM, which indeed restored stock recovery. Still would not boot past Asus wheel. Now I will attempt to install the latest TWRP version using fastboot, then try to flash new ROM. Panic is slowly creeping in, but I think I just need to keep at it. How should I proceed once latest version of TWRP is installed? Backup?
Click to expand...
Click to collapse
No use -- it won't boot.
Flash?
Click to expand...
Click to collapse
CROMI, redownload, hash check.
Android is new territory for me, a bit rockier than Windows. If this were a laptop on Windows 7 I'd be up and running already .
Click to expand...
Click to collapse
I know exactly what you're talking about. Was there once as well, and still it is changing so fast it's hard to keep up.
Thanx for the replies and any help.
OK. I used stock recovery to to a system restore. That worked, but of course all user data and apps are gone. Assume root access is also history, so it's just a matter of getting root access and restoring apps. I made a backup to SD card using Titanium Backup. Can I restore from here using the backup file, or should I just stop complaining and be happy I got the damn thing to boot?!!!
Click to expand...
Click to collapse
I would not take the chance, and just leave it as it is.
No big deal really: I'm back to STOCK .26, virgin
Click to expand...
Click to collapse
<< and still complaining?
device (except for being unlocked). Guess I'll get root and move on. Thanks. Great work here. I've learned a lot browsing these forums. Maybe one day I'll graduate from N00B status!
Click to expand...
Click to collapse
Maybe...
J/K!
You've done great, and I am happy to hear you got it up and running. I started out answering before reading your post in full, assuming it wasn;t fixed yet. Left the comments for reference (and fun, or mockery... -- good job, see you around!
same issue
Hi,
I have a same issue. I still was using the original ROM of ASUS. Now JB.
The device was once rooted in ICS, but that was lost when going to JB. And I did not yet try to reroot it. I was running JB already several months.
The device is unlocked, but I did not install a custom boatloader yet.
This week I was working in the car. Using the 3G connection of my phone and shared it via bluetooth to my pad to access my mails.
Suddenly the pad rebooted, and it never got further than the ASUS screen with the spinning wheel.
I can boot in recovery mode (power and V-), but then I cannot use my V+ buttom. I can only select the RCK, but unfortunately, It's not succesful. I first get the android with open lid and the spinning ball, but after a few seconds it changes to the android with the open lid laying on his bag with the red triangle on it. And it stays like this forever.
I cannot seem to enter fastboot mode (power and V+)
any suggenstion? All data can be erased. No problem as long as the tablet is working again.
TeTTiweTTi said:
Hi,
I have a same issue. I still was using the original ROM of ASUS. Now JB.
The device was once rooted in ICS, but that was lost when going to JB. And I did not yet try to reroot it. I was running JB already several months.
The device is unlocked, but I did not install a custom boatloader yet.
This week I was working in the car. Using the 3G connection of my phone and shared it via bluetooth to my pad to access my mails.
Suddenly the pad rebooted, and it never got further than the ASUS screen with the spinning wheel.
I can boot in recovery mode (power and V-), but then I cannot use my V+ buttom. I can only select the RCK, but unfortunately, It's not succesful. I first get the android with open lid and the spinning ball, but after a few seconds it changes to the android with the open lid laying on his bag with the red triangle on it. And it stays like this forever.
I cannot seem to enter fastboot mode (power and V+)
any suggenstion? All data can be erased. No problem as long as the tablet is working again.
Click to expand...
Click to collapse
When you hold down vol- and power button to boot into stock recovery, then when you see white text on the screen, let go both buttons, then hitting the Vol down button to move the highlighted to USB icon, can you try that?
Edit: if that's working move the highlighted to the "WIPE" icon, then hit Volume up twice, this will perform factory reset and wipe all your data and reset your device back to factory setup. You will see the Android spinning for awhile then your tablet will reboot and you will have to do the setup again, just like when you just brought the device.
buhohitr said:
When you hold down vol- and power button to boot into stock recovery, then when you see white text on the screen, let go both buttons, then hitting the Vol down button to move the highlighted to USB icon, can you try that?
Edit: if that's working move the highlighted to the "WIPE" icon, then hit Volume up twice, this will perform factory reset and wipe all your data and reset your device back to factory setup. You will see the Android spinning for awhile then your tablet will reboot and you will have to do the setup again, just like when you just brought the device.
Click to expand...
Click to collapse
Thanks for your help. I can boot into stock recovery. But I could move to the USB icon or the the Wipe Icon previously. Now I was able to select the Wipe Data Icon and currently I'm at the virgin "Welcome" screen again.
I don't understand why now it's working and previously not. Did I switch the v- and v+ button? If that's the case, I'm even a bigger idiot then I thought :silly:
Anyhow, All well that ends well.
Stuck on spinning wheel as well
sbdags said:
A spinning Asus wheel is always recoverable.
You have some incompatible rom / kernel / bootloader / data combination I suspect. It's easily done.
I'd make sure you are on a more recent version of TWRP - something like 2.3.1.0 or 2.3.3.0 that supports ICS and JB. It's very dangerous leaving such an old version of TWRP if you go to JB.....
Personally I'd update TWRP to 2.3.1.0 and then install the latest JB file from the Asus website to start with.
Click to expand...
Click to collapse
Hi sdbags! Thanks for all the work that you have put in to make this rom!
I am stuck on the spinning wheel as well. I installed cromi x last week. The tab was working okay. Very laggy, was very disappointed. I guess I did something wrong? Last night I used lagfix and rebooted. Since then the tablet has been stuck on the spinning wheel stage. I am pretty sure I installed the latest version of TWRP and checked I had the latest bootloader. Can I check these things now? Also if they are outdated how I do I update them if my tablet wont boot up?
Thanks!
TransformingPad said:
Hi sdbags! Thanks for all the work that you have put in to make this rom!
I am stuck on the spinning wheel as well. I installed cromi x last week. The tab was working okay. Very laggy, was very disappointed. I guess I did something wrong? Last night I used lagfix and rebooted. Since then the tablet has been stuck on the spinning wheel stage. I am pretty sure I installed the latest version of TWRP and checked I had the latest bootloader. Can I check these things now? Also if they are outdated how I do I update them if my tablet wont boot up?
Thanks!
Click to expand...
Click to collapse
Lagfix takes a good 20 mins to complete, even though it says it has finished after 5. I wonder if you rebooted too early. If you have sync off it can cause corruption on the data partition which might be your issue.
The fix is to format data from the twrp wipe menu and reflash. You will lose Everything on internal so back up in twrp first please.
Sigh - all for naught
stuck on spinning cyan screen
i rooted the tf700t and installed twrp, flash cm 10.2 rc 1, then rebooted and now it is stuck on boot screen. now i find i cant get back to stock recovery or twrp to correct the issue or bootloader. anyway that my tablet isnt totalled?
tcemle said:
i rooted the tf700t and installed twrp, flash cm 10.2 rc 1, then rebooted and now it is stuck on boot screen. now i find i cant get back to stock recovery or twrp to correct the issue or bootloader. anyway that my tablet isnt totalled?
Click to expand...
Click to collapse
Why can't you go back? Vol down and power doesn't work?
CM requires you to be on the 10.6.1.14.4+ bootloader first. Also a wipe before installing is mandatory.
sbdags said:
Why can't you go back? Vol down and power doesn't work?
CM requires you to be on the 10.6.1.14.4+ bootloader first. Also a wipe before installing is mandatory.
Click to expand...
Click to collapse
i have tried several times to use the vol- and power buttons but it doesnt seem to work. i press them and then i feel like its trying but doesnt go anywhere just stays on the black screen. adb recognizes the tablet but says it is offline because the boot screen is stuck. it usually only took a few seconds for it to go to the fastboot screen but nothing now. any ideas, if i get to the fastboot i can correct the problem.
tcemle said:
i have tried several times to use the vol- and power buttons but it doesnt seem to work. i press them and then i feel like its trying but doesnt go anywhere just stays on the black screen. adb recognizes the tablet but says it is offline because the boot screen is stuck. it usually only took a few seconds for it to go to the fastboot screen but nothing now. any ideas, if i get to the fastboot i can correct the problem.
Click to expand...
Click to collapse
Hmm that sounds like apx mode to me. If you didn't save nvflash backups I suspect it has bricked
I just updated to KitKat via this threat: http://forum.xda-developers.com/showthread.php?p=52214068
I noticed that the tablet was running excessively slow and so I decided to do a Factory Reset from within the tablets Setting. Now it's rebooted and it's sitting at the Android and the spinning thing in it's chest for more than 5 mins. Does it normally take this long?
stuck itwrp 2.7.0.0
Hey guys
Long time reader 1st time asking for help. Had tf700t unlocked, rooted and running cm 10.2.1 with twrp 2.6.3.1. Tried several times to load cm 11 and met only with failure. Read a post to try twrp 2.7.0.0. Loaded twrp 2.7.0.0, via goo, backed up everything and tried to flash cm 11. Tablet stuck in wipe mode for 90 minutes. (didn't even get a chance to load it!) I stopped it and re-started into twrp 2.7.0.0. Tried to recover and got pictured error, basically stating that at the wiping data point - E:Unable to mount '/data'. Tried to flash new rom and get the same thing. I can get into recovery but that is about it..............spock help me
gothamhill said:
Hey guys
Long time reader 1st time asking for help. Had tf700t unlocked, rooted and running cm 10.2.1 with twrp 2.6.3.1. Tried several times to load cm 11 and met only with failure. Read a post to try twrp 2.7.0.0. Loaded twrp 2.7.0.0, via goo, backed up everything and tried to flash cm 11. Tablet stuck in wipe mode for 90 minutes. (didn't even get a chance to load it!) I stopped it and re-started into twrp 2.7.0.0. Tried to recover and got pictured error, basically stating that at the wiping data point - E:Unable to mount '/data'. Tried to flash new rom and get the same thing. I can get into recovery but that is about it..............spock help me
Click to expand...
Click to collapse
TWRP 2.7 does take a long time to wipe. You shouldn't have interrupted it. Now you probably have a corrupted data partition and you will have to format it. That will erase all your data, but if the nandroid you made was successful, that should not be a problem.
stolen
berndblb said:
TWRP 2.7 does take a long time to wipe. You shouldn't have interrupted it. Now you probably have a corrupted data partition and you will have to format it. That will erase all your data, but if the nandroid you made was successful, that should not be a problem.
Click to expand...
Click to collapse
1st of all thank you, unfortunately the nandroid bu was on a laptop that was stolen. Anything else I can do?
I am on a Verizon Razr Maxx HD (xt926). This all started when I decided to cleanly flash the newest version of CM10.2. I had been running it before. I wanted to start from a blank slate, so I went into TWRP and did the format wipe. Installed the newest CM10.2 nightly and gapps. This went fine and I booted into the ROM and started recovering all of my stuff. I installed F-droid and AdAway, and rebooted for that. The phone never got past the Bootloader Unlocked warning screen. I turned it off and went into TWRP to try some things. I tried to fix permissions, but it failed, referencing something to do with fdroid. I wiped again and reinstalled CM, but I still couldn't get past the Bootloader Unlocked warning.
I booted into TWRP again and wiped what I could, and accidentally wiped my external SD, and I had no card readers lying around to get the ROM zips back onto it. I downloaded the Razr HD utility, used the batch file, and tried to flash the stock rom through fastboot, but it got stuck in some kind of loop and would not flash correctly. I then tried to do it manually, but got some sort of buffer error. I tried again, and it started ok but I never saw it actually finish flashing.
By this time I finagled the ROM zips onto the SD card and stopped the fastboot and booted into TWRP. I did another set of wipes, and rebooted into TWRP again. I flashed the CM and Gapps. The ROM booted fine from TWRP and I was able to start setting up my account again. I tried rebooting after the initial setup just to see if it was working correctly, and was met with the fastboot screen with fastboot reason: Flash failed. I rebooted into TWRP from there, and tried to boot normally, but it still brought me to the fastboot. I went to the boot menu and tried the normal boot selection, and now my phone is stuck on the Bootloader Warning screen and now it won't even turn off when I hold the power button.
I have no idea what is going on, or why I could get to the working ROM once but not again. Does anyone know anything that could help me?
Kopiok said:
I am on a Verizon Razr Maxx HD (xt926). This all started when I decided to cleanly flash the newest version of CM10.2. I had been running it before. I wanted to start from a blank slate, so I went into TWRP and did the format wipe. Installed the newest CM10.2 nightly and gapps. This went fine and I booted into the ROM and started recovering all of my stuff. I installed F-droid and AdAway, and rebooted for that. The phone never got past the Bootloader Unlocked warning screen. I turned it off and went into TWRP to try some things. I tried to fix permissions, but it failed, referencing something to do with fdroid. I wiped again and reinstalled CM, but I still couldn't get past the Bootloader Unlocked warning.
I booted into TWRP again and wiped what I could, and accidentally wiped my external SD, and I had no card readers lying around to get the ROM zips back onto it. I downloaded the Razr HD utility, used the batch file, and tried to flash the stock rom through fastboot, but it got stuck in some kind of loop and would not flash correctly. I then tried to do it manually, but got some sort of buffer error. I tried again, and it started ok but I never saw it actually finish flashing.
By this time I finagled the ROM zips onto the SD card and stopped the fastboot and booted into TWRP. I did another set of wipes, and rebooted into TWRP again. I flashed the CM and Gapps. The ROM booted fine from TWRP and I was able to start setting up my account again. I tried rebooting after the initial setup just to see if it was working correctly, and was met with the fastboot screen with fastboot reason: Flash failed. I rebooted into TWRP from there, and tried to boot normally, but it still brought me to the fastboot. I went to the boot menu and tried the normal boot selection, and now my phone is stuck on the Bootloader Warning screen and now it won't even turn off when I hold the power button.
I have no idea what is going on, or why I could get to the working ROM once but not again. Does anyone know anything that could help me?
Click to expand...
Click to collapse
Try the solution in the last few posts on this thread. http://forum.xda-developers.com/showthread.php?t=2465695
I hope you get more knowledgeable advice than mine but, were I in your situation, my primary goal would be to get back to STOCK. Forget CM and modding for now. Either through TWRP or through the recovery settings on the phone itself I'd get to where I could do a factory reset. If you're continuously able to boot into TWRP I don't see how your phone could be bricked. My experience is, if I can get a phone to do ANYTHING I've got a shot at figuring out how to get out of whatever mess I've created. I don't know if this could be a factor but I'd put in a different micro SD card too, in case there's something on the card you've got in there.
Just an update. So, I got it to go back to fastboot this morning and I tried using the Razr Utility to flash back stock and stock recovery, but I got a "Failed" line with the reason "Remote Failure". Not sure what that's about. When it reset it got back to the Cyanogenmod boot graphic, but it never started. I left it there for a good 12 minutes.
Right now it's sitting in TWRP. I'm going to let it charge to 100% (it was a little less when I tried all of this) and attempt it again at 100% battery. Thanks for the help so far!
So, I tried using the Razr Utility to flash the system, kernel, radio and for system it was unsuccessful (something about too many threads or strings, something to that effect), but the rest said OK. Now my phone doesn't seem to turn on. My computer still makes the device plugged in sound when it's plugged/unplugged, but I cannot get the screen to show anything or seem to turn on the phone.
Is this it? Is it... bricked!? ;-;
Edit: I ordered the Factory Adapter as a last resort sort of thing. This is lame.
Edit Edit: I've seen the boot logo since my last edit! But... it's not coming back and I still can't even bring up the bootloader. I don't know why it will sometimes turn on or sometimes not. In any case, I'm now hopeful that not ALL is lost.
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
cellzealot said:
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
Click to expand...
Click to collapse
That's the plan! One odd thing happening now... My phone's screen isn't showing anything, so I assumed it was off. I left it unplugged and went to see a movie..... and the phone is still warm. This leads me to believe the phone is still drawing power, for some reason... God this is weird. I'll wait for the adapter and try again. Thanks for the help!
cellzealot said:
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
Click to expand...
Click to collapse
according to the packaging on mine from tbh a chinaman made it, just sayin
Yes, we designed them and contracted through our US supplier who produced all of our cables who, in turn, had them produced in China according to our specifications. There is no longer any injection molded plastic production done in the US that can work at this small scale for affordable rates.
Sorry...that's the way the world works these days.
cellzealot said:
Yes, we designed them and contracted through our US supplier who produced all of our cables who, in turn, had them produced in China according to our specifications. There is no longer any injection molded plastic production done in the US that can work at this small scale for affordable rates.
Sorry...that's the way the world works these days.
Click to expand...
Click to collapse
thanks for making it either way, better to have and not need.
havent had to use it so far
bweN diorD said:
thanks for making it either way, better to have and not need.
havent had to use it so far
Click to expand...
Click to collapse
You're welcome! They are definitely the best $10 investment you can make in any Motorola phone.
Next time you want to invest many thousands of dollars of your own money in a wild, hairbrained scheme to help a bunch of anonymous people on the internet fix their phones that they recently finished destroying themselves, let us know...we have just the plan!
cellzealot said:
You're welcome! They are definitely the best $10 investment you can make in any Motorola phone.
Next time you want to invest many thousands of dollars of your own money in a wild, hairbrained scheme to help a bunch of anonymous people on the internet fix their phones that they recently finished destroying themselves, let us know...we have just the plan!
Click to expand...
Click to collapse
how many thousands, and whats the plan?
I got the Factory Adapter and used RSD Lite to flash stock. And it works! Yay! It's starting up reliably and everything.
Except... it won't start up without the cable attached, and the battery icon has a big question mark on it. It also won't connect to the cell network (but does connect to WiFi). What do I do now?
Edit: So I noticed that while the battery status said "Unknown", it did go from 2% to 3% charge level when I plugged it in normally for a little. My plan at the moment is to try leaving it plugged in for a while and then try taking the OTA update to see if that fixes everything. Good plan?
Edit Edit: Never mind! I just had to let it charge for a bit. It seems to be back in working order, now! Thank you so much for all the help everyone!
That is exactly what is supposed to happen. Congrats on fixing your phone!
The factory cable/adapter does not charge the device but powers it directly, allowing it to boot no matter what state the battery is in or even without a battery at all.
You cannot charge in bootloader, which is why the cable/adapter is so valuable. Once the device can boot/charge normally then you are all set.
Ok so I'm new to the thread and basically to android tablets, so please forgive my ignorance if it should become prevalent.
I bought a Galaxy Note Pro 12.2 32GB wifi and had it for about one day. I performed a factory restore on the device in which it froze for about 2 hours. (this is probably the stupid part) I turned it off since it was not progressing after a long time and it booted up as a new device. After about 5 minutes of use, it randomly restarted and went into a boot loop. About every 15 or so boot screens, it sometimes boots up, then freezes and goes back into a boot loop. The longest it stayed active without resetting was about 10 minutes. After hours of research, I have done the following
Tried to boot into recovery to no avail. It just continuously pops up the device name screen
I have tried to flash the device with a stock rom in odin 3.9.
It recognizes the device but hangs at the Initialization stage. Sometimes it will give me a fail notice saying that it couldn't open the COM port
I've tried it on another computer, changed usb ports, powered on and off multiple times and nothing changes.
please let me know if i've forgotten anything. Any help will be appreciated.
Also I live in Japan, so if I can fix it myself that would be nice since this device isn't sold here yet, I'm not able to get support from a store. I'd like to avoid waiting a month sending it back to america, replacing it, and getting it sent back. Thanks in advance ^_^
Make sure you have the correct and latest Samsung drivers for your tablet.
If you have an SD card installed, try removing it and see if you can boot up and get it stable.
roninb30 said:
Ok so I'm new to the thread and basically to android tablets, so please forgive my ignorance if it should become prevalent.
I bought a Galaxy Note Pro 12.2 32GB wifi and had it for about one day. I performed a factory restore on the device in which it froze for about 2 hours. (this is probably the stupid part) I turned it off since it was not progressing after a long time and it booted up as a new device. After about 5 minutes of use, it randomly restarted and went into a boot loop. About every 15 or so boot screens, it sometimes boots up, then freezes and goes back into a boot loop. The longest it stayed active without resetting was about 10 minutes. After hours of research, I have done the following
Tried to boot into recovery to no avail. It just continuously pops up the device name screen
I have tried to flash the device with a stock rom in odin 3.9.
It recognizes the device but hangs at the Initialization stage. Sometimes it will give me a fail notice saying that it couldn't open the COM port
I've tried it on another computer, changed usb ports, powered on and off multiple times and nothing changes.
please let me know if i've forgotten anything. Any help will be appreciated.
Also I live in Japan, so if I can fix it myself that would be nice since this device isn't sold here yet, I'm not able to get support from a store. I'd like to avoid waiting a month sending it back to america, replacing it, and getting it sent back. Thanks in advance ^_^
Click to expand...
Click to collapse
Wow, you rooted (void warranty) on a day old tablet on a platform that is new to you? I've been rooting Android devices for over 3 years now and have had mine for a week now without root. Don't get me wrong, I have a list of things I want that require root and it will be happening but I figured I should at least run it for a couple weeks to make sure no defects pop up before I void the warranty. Good luck to you!
Russbad said:
Make sure you have the correct and latest Samsung drivers for your tablet.
If you have an SD card installed, try removing it and see if you can boot up and get it stable.
Click to expand...
Click to collapse
I've installed drivers a few times. No go.
I'm on it now and the boot loop seems to have stopped, but I still get random restarts. But each time it restarts, it's from factory, so it doesn't save anything I download or any settings such as enabling debugging in the developer settings.
rkirmeier said:
Wow, you rooted (void warranty) on a day old tablet on a platform that is new to you? I've been rooting Android devices for over 3 years now and have had mine for a week now without root. Don't get me wrong, I have a list of things I want that require root and it will be happening but I figured I should at least run it for a couple weeks to make sure no defects pop up before I void the warranty. Good luck to you!
Click to expand...
Click to collapse
I didn't root, and I haven't voided my warranty. I can still get into download mode and my flash counter is still at 0. I never tried to root, I simply wanted to flash to stock, from stock.
[Edit] I'd also like to mention that Odin has not successfully done anything, Every time I tried to flash it was done with a stock ROM, and everything that has gone wrong has occurred on nothing but the stock ROM
Is it possible that I need a pit file for the device since no version of Odin will get past initialization? ....if so where can I get one for the this model?
roninb30 said:
I've installed drivers a few times. No go.
I'm on it now and the boot loop seems to have stopped, but I still get random restarts. But each time it restarts, it's from factory, so it doesn't save anything I download or any settings such as enabling debugging in the developer settings.
I didn't root, and I haven't voided my warranty. I can still get into download mode and my flash counter is still at 0. I never tried to root, I simply wanted to flash to stock, from stock.
[Edit] I'd also like to mention that Odin has not successfully done anything, Every time I tried to flash it was done with a stock ROM, and everything that has gone wrong has occurred on nothing but the stock ROM
Click to expand...
Click to collapse
If you are not rooted and you have a boot loop I'd be returning the device for a new one...
rkirmeier said:
If you are not rooted and you have a boot loop I'd be returning the device for a new one...
Click to expand...
Click to collapse
I hate to agree since you would have to wait for a while to get the replacement, however the device sounds to be defective. just my two cents as a developer, if you flash anything to the device, root, a new image, or even the factory software, Knox will be tripped and the counter will go from zero to a one. My advice would be to get a replacement for the defective one.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Huge 3rd.
Device should just plain WORK out of the box. There shouldn't have been a need to flash stock to begin with.
One last suggestion, factory reset from recovery. From complete power off, hold volume up+home button+power and after a few seconds let go until it boots into recovery. From there wipe cache, wipe davlik, and factory restore. Good luck!
Android.Ninja said:
I hate to agree since you would have to wait for a while to get the replacement, however the device sounds to be defective. just my two cents as a developer, if you flash anything to the device, root, a new image, or even the factory software, Knox will be tripped and the counter will go from zero to a one. My advice would be to get a replacement for the defective one.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Click to expand...
Click to collapse
Yeah, it's unfortunate, but I have to suck it up and just pay the shipping back to Ameica....then again for it to come back. Just wanted to do everything I could before I had to send it. Thanks for the input though. I guess I learned quite a bit researching processes and terminology which will be helpful in the future. ^-^
Russbad said:
One last suggestion, factory reset from recovery. From complete power off, hold volume up+home button+power and after a few seconds let go until it boots into recovery. From there wipe cache, wipe davlik, and factory restore. Good luck!
Click to expand...
Click to collapse
Tried many times. The device pretty much gives me the finger by going blank and repeatedly showing the boot up logo when I hold the buttons down.
rkirmeier said:
Wow, you rooted (void warranty) on a day old tablet on a platform that is new to you? I've been rooting Android devices for over 3 years now and have had mine for a week now without root.
Click to expand...
Click to collapse
I voided my warrant after having mine for about an hour (though not new to Android). I did all my random "OCD does it work as I expect/want" tests and it passed, so I rooted. Had it for one week now, and I absolutely love everything about this tablet.
roninb30 said:
Yeah, it's unfortunate, but I have to suck it up and just pay the shipping back to Ameica
Click to expand...
Click to collapse
IMO, it will be worth it. This is my fourth tablet, and is the first one I've not had buyer's remorse with. Luckily with the gift credit for Google I was able to get the non-Tegra equivalents of some of my favorite games, too.
ExtremeRyno said:
I voided my warrant after having mine for about an hour (though not new to Android). I did all my random "OCD does it work as I expect/want" tests and it passed, so I rooted. Had it for one week now, and I absolutely love everything about this tablet.
IMO, it will be worth it. This is my fourth tablet, and is the first one I've not had buyer's remorse with. Luckily with the gift credit for Google I was able to get the non-Tegra equivalents of some of my favorite games, too.
Click to expand...
Click to collapse
After doing research, I think that even if I get a new one, I want to root it. With the problems I've read about for kitkat 4.4.2 I need to know how to fix problems, and start with a fresh install of roms and know how to use custom recovery. I haven't done anything yet, but I was wondering...
Since I'm stuck in a boot loop with no stock recovery, can I flash a custom recovery to fix my issues, flash the stock rom that is on sammobile.com and then root after that? From what I understand this is a soft brick since I can still sometimes access the device. I worked out why I couldn't access the device with adb and now it shows the device as listed. It stays on long enough to where I could flash a recovery before it restarts itself. I'm not trying to do anything stupid, just getting information before I pay the shipping for it back to the states. I've checked the knox counter in download mode, and it is still set to 0, so I haven't voided the warranty yet.
Any input would be greatly appreciated.
It's odd that a new device would not have recovery. I don't want to insult you, but just making sure we covered the basics, volume up+home+power gets you to recovery. The boot logo will flash about three times, make sure you're still pressing all three buttons, then let go after the 3rd flash of the boot logo then you should be in recovery. Volume down+home+power takes you to download mode, this is where you flash roms and recovery. I read in another post about someone not being able to get in recovery after numerous times, it turned out that he was hitting the volume down button instead of volume up. Just to be clear, if you do flash recovery, you will definitely trip knox, at this time there is no way around that.
Russbad said:
It's odd that a new device would not have recovery. I don't want to insult you, but just making sure we covered the basics, volume up+home+power gets you to recovery. The boot logo will flash about three times, make sure you're still pressing all three buttons, then let go after the 3rd flash of the boot logo then you should be in recovery. Volume down+home+power takes you to download mode, this is where you flash roms and recovery. I read in another post about someone not being able to get in recovery after numerous times, it turned out that he was hitting the volume down button instead of volume up. Just to be clear, if you do flash recovery, you will definitely trip knox, at this time there is no way around that.
Click to expand...
Click to collapse
I understand the skepticism. Yeah, I tried the button combination, usb in, usb out. I can power off the device completely only when it is plugged into power. When I hold the recovery combo from power on, the screen goes black with no flashing of the boot logo, looks as if it wants to go to recovery, and then then the boot logo comes up again, but just continues to the boot animation and continues the boot loop, even if i'm still holding down volume up and home buttons. It will sometimes boot up, then freeze after a couple of seconds, and return to boot loop. On rare occasions it will boot up, but turns me to setup like it's a brand new device. I can access everything for about 10 minutes, and then it will randomly restart and continue to boot loop again after that. I tried update/initialization in kies, but it would restart before the downloading and decompressing of binary could finish. It finished one time and then switch to a downloading screen (although it didn't say odin since you have to manually go there) but the update would freeze at 0 percent no matter how long I left the device there. It's all pretty lame ><
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you try flashing factory images?
ryukiri said:
Did you try flashing factory images?
Click to expand...
Click to collapse
Yeah, that was what I flashed :/
If you can get into fastboot you "should" be able to flash stock images... Obviously this will revert any root and you will need to flash TWRP/CWM recovery after.
I assume you have a Windows PC with fastboot/adb setup and all drivers etc..
- Download latest "stock" hammerhead images (I cannot post links due to XDA rules... so: "developers.google.com/android/nexus/images#hammerhead"
- Extract the .tgz archive contents on your PC into a folder
- Boot the N5 into fastboot and plug USB cable from phone into your PC
- Go to the folder with the extracted files and run the "flash-all.bat" script on Windows
**Hopefully at this point your device will start to respond.. I.e, on fastboot screen, at the bottom you will see "writing" or something, as the script runs on the command window on your PC.**
If this works, you should be able to reboot once complete and then wait to see if you can get back into your phone.. then you can fastboot again and flash custom recovery, and then whatever rom.
If however you have a hardware issue (i.e, even after the above process it fails) then I am not sure what you could do... I guess ensure it has a complete charge. If you can get into fastboot and the buttons are responsive then it should not be a faulty power button.
Hope this helps :good:
Have you tried a simple factory reset? Reason I ask is it was working fine so sounds like something needs "flushing out" clear cache etc.
kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you choose the right model and firmware before you flash in WugFresh NRT?
The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.
howard bamber said:
The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.
Click to expand...
Click to collapse
Hello! I am apologize for that I didn't read the OP carefully. This happened to me once in that particulary way, but it was immediately after flashing. OP says that it happened suddenly, without reason. So now I am the one, who doesn't read, right? Sorry for that.
Regards, Zagor
Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.
kyle313 said:
Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.
Click to expand...
Click to collapse
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.
theesotericone said:
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.
Click to expand...
Click to collapse
I was actually able to relock the phone.
Luckily I called google and they're going to send me a replacement.
If anyone else has any other ideas, I'll still take them...I'd rather not be without a phone for the next week!
You won't be without a phone - they are sending a refurbish unit to you , putting a block on your credit card and waiting for you phone to arive at them. Once that happens they will release the funds.