[Q] Flahs Rom? no chance? - RAZR HD Q&A, Help & Troubleshooting

Hi,
Still on stock, having an XT925 unlocked with Philz recovery (6.23.8), I don't sem to be able to flash.....For sure, haven't been flashing in a long time, but like to change from stock to CM now.
The issues I'm facing:
* either "error status 7"
* or, when then de-zipping the file, deliting the asset-line, re-zipping and flashing, recovery simply indicates opening package and then installation aborted (no reason, nor error message....)
Any help please? It must be something "simple" I guess, only tt I can't seem to find it for the moment....
At this point I'd like CM 10.1 (stable), downloaded the zip from CM directly, awaiting a very good version CM11.
thanks already!

Hi, not feedback yet, but solved: reinstalled CWM "official" and all's fine!
Case closed
Sent from my XT925 using XDA Free mobile app

Related

[ROM] Leaked early ICS for Lenovo Ideapad A1

There's been some discussion recently of the leaked ICS ROM for the Lenovo A1, which is a little difficult to install, because Clockworkmod won't flash it due to failed assertions. I've modified it so that it can be flashed through CWM.
Be warned that it will overwrite U-Boot, the kernel, and the RAMdisk (these are not usually backed up by CWM 5.0.2.7). If you've installed it, and you want to go back to your old backup (very likely as you'll soon get tired of nothing working properly), use the following steps:
1. Boot into recovery
2. Restore your backup using the normal CWM functionality
3. Install ub-fastboot.zip from this post.
4. Reboot into fastboot mode and restore the correct kernel and ramdisk for your ROM with:
Code:
fastboot flash inand-kernel <kernel>
fastboot flash inand-ramdisk <ramdisk>
5. Reboot.
If you don't know what the correct kernel/ramdisk is for your ROM then I'd advise you not to try using this ROM.
DISCLAIMER
There is no guarantee of anything going right if you install this ROM. I'll try and help with problems (and I'm sure other people will too) but if things get messed up it'll be your fault. Don't take the risk without understanding it and being comfortable with it.
Download: here.
So now you've flashed ICS to your A1, but you can't use it. Duh. Everything is broken right now.
For those scared of using ADB commands during a restore to CM7/Stock gingerbread... Here's the stock RAMDISKS, and Kernel as CWM .Zips... [Links taken from the other A1 threads, stock kernel .zip by yours truly. ;-) ] Flash ONLY the ones you need before you flash your Stock rom/CM7 rom/nandroid restore. In this order.
ROW 2375 / ROW 2525 builds ONLY RAMDISK
(1.){^^vv If you don't know which you're supposed to have, DO RESEARCH FIRST
ROW 2643 build only RAMDISK
(2.)Stock Kernel
(3.) Then Stock ROM/CM7 ROM (your choice) (skip step 2 if flashing a 4/28 or later CM7 build it includes a kernel.)
(4.)Fastboot bootloader mod
Click to expand...
Click to collapse
_________________________________________________________________________________________
Now if only we could get Wifi and USB working... That would be a decent start...
Weird part is, on the leaked one, the device name under settings is "Zoom2"
(haven't flashed this one yet, but I assume it's the same)
Makes me wonder if this is infact the real deal... or at least an attempt by a third party? (see post below)
Though it's nice to see it being possible.
monsieurtalbot said:
Weird part is, on the leaked one, the device name under settings is "xoom2"
(haven't flashed this one yet, but I assume it's the same)
Makes me wonder if this is infact the real deal... or at least an attempt by a third party?
Click to expand...
Click to collapse
It says "Zoom2" - that's an OMAP3 development kit that the hardware in the A1 is very similar to - they'll have started with the device-specific files for the Zoom2, and haven't bothered to change them yet. See http://www.omapworld.com/zoom.html
gmarkall said:
It says "Zoom2" - that's an OMAP3 development kit that the hardware in the A1 is very similar to - they'll have started with the device-specific files for the Zoom2, and haven't bothered to change them yet. See http://www.omapworld.com/zoom.html
Click to expand...
Click to collapse
...That explains it. haha "xoom". Typo. :-/
How to fix Wi-fi
Wi-fi work= ICS for daily use
dawkon13 said:
How to fix Wi-fi
Wi-fi work= ICS for daily use
Click to expand...
Click to collapse
It's not worth trying to fix with this ROM. It'd be better to work on a proper build of ICS instead of wasting time augmenting this early build.
Anyone trying this rom - can you take a look if /proc/config.gz exist and if so - make an upload. I'm just curious, but don't want to waste my time ....
Dear gmarkall, i flashed from CWM and it says installation aborted.. ! now i can't boot up to normal stock ROM ..
it stops in lenovo logo.. Pls ..
Tint Ag Khaing said:
Dear gmarkall, i flashed from CWM and it says installation aborted.. ! now i can't boot up to normal stock ROM ..
it stops in lenovo logo.. Pls ..
Click to expand...
Click to collapse
If you can still boot into recovery, flash an OTA zip file.
If you can't, then follow these instructions.
Brancaleone said:
Anyone trying this rom - can you take a look if /proc/config.gz exist and if so - make an upload. I'm just curious, but don't want to waste my time ....
Click to expand...
Click to collapse
I'm not running the ROM right now, but I tried extract-ikconfig on the kernel and it didn't find a config - I don't know how reliable that tool is though, since I've never used it before.
An update for the ICS ROM was posted in a German forum. Wifi is said to be working now. You can download it here. To use it, you need to flash the original ICS firmware (A107_.rar) and then install the update.zip with the stock recovery from an external sd card.
I've tested the update on my device. Wifi and sound output are working now. The build props show a Lenovo device now (ro.build.fingerprint=Lenovo/IdeaTab_A1107/A1107:4.0.4/MR1/eng.user.20120503.193509:eng/test-keys). The main issue seems to be that the Google Apps are not working (including Play).
EDIT: The problem with Google Play seems to be caused by the file permissions of drmserver. After this, I can download apps from Play Store (but only until rebooting):
Code:
adb remount
chmod 777 /system/bin/drmserver
./system/bin/drmserver&
Confirmed wifi works and sound works fine.
Google store not so much but looks to be a quick fix.
Gps seems to be working but haven't had time to test.
Mounting sd card and usb mounting are messed up.
Also for anyone considering this 4.03 they should know its based on a phones os and not a tablet os.
I can't update on 2GB A1 - there is an error in the middle of process.
The first version was running ok.
Pls!
Dear gmarkall,
I redownloaded and flashed again and now it's running OK.
Now from the above posts, i see that an update that fixes wifi and sound 's available to download again here.https://skydrive.live.com/?cid=56E49CF4B3C46641&id=56E49CF4B3C46641!106&action=Download
So pls tell me what i've to do again. Can i flash this update from CWM ?
Thanks !
Plaease help! Not work on IdeaPad A1 2GB
CWM log:
size:3833856assert failed: run_program("/tmp/fuse:, "mbr", "/tmp/mbr2GB.img")
E;Error in /sdcard/update.zip
(status 7)
Installation aborted
Can you help me?
This Update doesn't work with cwm and I wouldn't recommend to anyone flashing it. It screwed up my whole file system including rescue partition and took me several hours to get rid of it. On top, it doesn't contain config.gz.
If you are using CWM, you can go back to stock recovery in just a few minutes. It is described here. This shouldn't be an issue?
Clearly this is not a actually preview from lenovo but rather a home-brew that does a decent job of getting many things working.
The first preview had a tablet based 4.03 and this supposed update has a phone 4.03 layout.
Still not bad just not from lenovo.

[Q] Failed installing CM12

Hello all
I have XT1032 (GPE), and I had CM11 on it (nightly from 1106, I believe).
Today I downloaded the latest CM12 nightly (0115), and tried installing it from TWRP. The installation failed (I keep getting "Error executing updater-binary"), and I remained with no system partition.
I tried many guides and tips (the most promising one was this), but nothing seemed to work.
If I understand correctly, there is some problem in installing CM12 over 4.4.4 (from CM11).
I somehow managed to get to stock 4.4.4, but I'd much prefer to get back to CM11. However, all the download links on CM website don't seem to work over a week back, or something. Is there some other mirror with CM11 I can use, in the meantime? Maybe someone in here has a relatively recent CM11 zip file he can send me?
And what about a real solution to the problem? Is there a way to install CM12 on my stock 4.4.4? Am I the only one who got this error?
Thank you for your help.

[Q] Tmo Samsung S4 (SGH-M919) with Google Play Edition, need help

(this belongs elsewhere but 10 posts...)
I have a rooted S4 and just installed Dandvh's Google Play Edition v.20150919 (http://forum.xda-developers.com/showthread.php?t=2539361) rom. I used TWRP to install, wiping everything but internal storage, then flashed the rom. Installed fine, no errors. Took the usual bit of extra time to boot the first time then up and running clean and stable. The issue is that the OTA Updater app doesn't work, severely limiting my ROM options. It didn't install as part of the rom install, though I'm not sure if it's normal to just get it off the play store. I get an error message about not being compatible with the ROM and can't access it (error message screen cap below). Just in case, I wiped the phone and flashed again just to be sure, same result. The OTA Updater is important as this is where you can change kernals, audioFX stuff, toggle advanced power menus, and quite a bit more. When I used this ROM during the first part of the year OTA Updater worked just fine but I switched off in July to try another ROM so maybe something with the ROM has changed? I tried searching for any comments in the thread to indicate either that something changed with OTA Updater or if anyone else had a similar problem, found nothing. Would appreciate if anyone might know why OTA Updater isn't working or how I might correct it. Thanks.
Edit #1: I haven't changed the model number to SGH-M919 (as seen in the screen cap) in build.prop yet as if I can't get this ROM to work right I'll need to flash something else.
Edit #2: I noted in the patch notes that the ROM was updated for OTA Updater 2.4.2 and I was running 2.5.3 so I uninstalled it and installed 2.4.2. No luck there either.
Version and Build Screenshot
https://imgur.com/SQ6ie5i
Error message
https://imgur.com/TfWN7p2

Noob trying to upgrade Asus TF101 to Lollipop and failed

Hey folks. I am trying to get the hang of messing around with my android device. I am quite good with Windows/Linux, so this is the next frontier. So here is my problem: I am trying to update my TF101 to 5.1 and the installation failed. I installed Clockwork Recovery v3.2.0.1 and it worked well, I can get into recovery no prob. I installed the kitkass 5.1 on the SD card, the Update-Super-v2.46, and Katkiss_5.1_030c.
When I trying to install from zip the Katkiss I get this error:
set_metadata_recursive: Some changes failed.
E:error in sdcard/Kitkass/Katkiss-5.1_030c.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
I am a bit stumped. Did I download a bad copy? I can't get into the TF101 at this point except for recovery. When I try, it just stays on the ASUS splash page.
I am sure this has been asked before, but I couldn't find any threads with this issue. Any help is appreciated.
xa3phod said:
Hey folks. I am trying to get the hang of messing around with my android device. I am quite good with Windows/Linux, so this is the next frontier. So here is my problem: I am trying to update my TF101 to 5.1 and the installation failed. I installed Clockwork Recovery v3.2.0.1 and it worked well, I can get into recovery no prob. I installed the kitkass 5.1 on the SD card, the Update-Super-v2.46, and Katkiss_5.1_030c.
When I trying to install from zip the Katkiss I get this error:
I am a bit stumped. Did I download a bad copy? I can't get into the TF101 at this point except for recovery. When I try, it just stays on the ASUS splash page.
I am sure this has been asked before, but I couldn't find any threads with this issue. Any help is appreciated.
Click to expand...
Click to collapse
I have this devices some were in a drawer lol anyways sounds like u mave have downloaded a bad copy try redownloading and get a md5 checker and check it. Also did you make a back up in twrp? If so could restore that in time being. Have a read trew kitkass thread agin and see if you missed any thing i know i had that rom running at one point but went back to kitkat cuz it was more stable.
Thanks for the help. I think I had a bad copy and a redownload fixed the issue. Android 5.1 is on the device and it sort of works. Well, not really. It runs poorly, reboots a lot and now it actually reboots before I can log in. I think I should hit a lower version of Android. Any suggestions on which version works best on the TF101? As of now its not usable.
Also, if I go to say, 4.4, can I use the same gapps-Katkiss-5.1 or do I need a correct version for 4.4? Can I just install it over 5.1 or do I need to wipe the device and start from scratch?
Again, thanks for the help.:good:
I tried to install 4.0.3, the official TF101 image from Asus but it wouldn't install. How do I go back to stock?

[Completed] Samsung A3 (SM-A300FU) Cyanogenmod 13 not working but 12.1

I have been running Cryogenmod 12.1 for my Samsung SM-A300FU but its UNOFFICIAL and a preview the webpage i got it off says 'Wifi and Camera NOT WORKING'. I guess thats what i get for following my mates advice.
Because of this, i looked at CM13 (Android 6) which i got off the XDA site and i have made sure it is for my phone and model, the SM-A300FU. Of course, being my luck it didnt work. I get the error of 'Executing updater binary in zip' and i have wiped my phone then tried to install it and i have also tried to completly remove all OS and files then install it which apparently fixed it for people, but not me of course. In a desperate measure i even bluetoothed the ROM to another phone then back into my SM-A300FU to get it onto the internal storage but that obviously didnt change anything.
Finally, i gave up and tried to downgrade back to Android 5.0.2 although this isnt a CM zip. Once again, this ROM doesnt work. It just gives me an error saying it failed, no reason in particular.
I have a few issues for a whole range of files. Any help in fixing any or all of these would be much appreciated.
Links to the files I sites i downloaded the files from:
CM 12.1 UNOFFICIAL (Not meant to work fully) - https://forum.xda-developers.com/samsung-a-series/orig-development/rom-cyanogenmod-12-1-samsung-galaxy-a3-t3273323
CM 13 (Doesnt install) - https://forum.xda-developers.com/samsung-a-series/orig-development/rom-cyanogenmod-13-0-unofficial-samsung-t3326297
Android 5.0.2 ROM (Doesnt install) - http://www.youmobile.org/blogs/entry/-Firmware-Download-Samsung-Galaxy-A3-SM-A300FU-Official-Android-5-0-2-Lollipop-update-Rolling-out
So to reitterate: I installed the CM 12.1 ROM without issues but it turns out to be a mod that doesnt work fully meaning its unsuitable for me. I downloaded CM 13 but this gets an error. I downloaded a Android 5.0.2 ROM which has an error it doesnt even tell me about.
XDA Visitor said:
I have been running Cryogenmod 12.1 for my Samsung SM-A300FU but its UNOFFICIAL and a preview the webpage i got it off says 'Wifi and Camera NOT WORKING'. I guess thats what i get for following my mates advice.
Because of this, i looked at CM13 (Android 6) which i got off the XDA site and i have made sure it is for my phone and model, the SM-A300FU. Of course, being my luck it didnt work. I get the error of 'Executing updater binary in zip' and i have wiped my phone then tried to install it and i have also tried to completly remove all OS and files then install it which apparently fixed it for people, but not me of course. In a desperate measure i even bluetoothed the ROM to another phone then back into my SM-A300FU to get it onto the internal storage but that obviously didnt change anything.
Finally, i gave up and tried to downgrade back to Android 5.0.2 although this isnt a CM zip. Once again, this ROM doesnt work. It just gives me an error saying it failed, no reason in particular.
I have a few issues for a whole range of files. Any help in fixing any or all of these would be much appreciated.
Links to the files I sites i downloaded the files from:
CM 12.1 UNOFFICIAL (Not meant to work fully) - https://forum.xda-developers.com/sa...m-cyanogenmod-12-1-samsung-galaxy-a3-t3273323
CM 13 (Doesnt install) - https://forum.xda-developers.com/sa...-cyanogenmod-13-0-unofficial-samsung-t3326297
Android 5.0.2 ROM (Doesnt install) - http://www.youmobile.org/blogs/entr...ial-Android-5-0-2-Lollipop-update-Rolling-out
So to reitterate: I installed the CM 12.1 ROM without issues but it turns out to be a mod that doesnt work fully meaning its unsuitable for me. I downloaded CM 13 but this gets an error. I downloaded a Android 5.0.2 ROM which has an error it doesnt even tell me about.
Click to expand...
Click to collapse
Greetings and welcome to assist. Which recovery are you using ? Have you tried to update to the latest ? Also if that doesn't work try using odin to go back to latest stock then reflashing custom recovery
Why not make an account and let the experts here
https://forum.xda-developers.com/samsung-a-series
guide you
Good Luck
Sawdoctor

Categories

Resources