Related
So, this happened recently, and I fixed it. Link: http://forum.xda-developers.com/showthread.php?t=1735119
Well, outta no where, same basic issue, but with a twist.
This afternoon while I was asleep my GTab rebooted. It came back to the "Samsung Galaxy Tab 7.0 Plus" splash screen and is stuck. I *can* get into download mode, and I can almost get into recovery. When I try to go into recovery, it loads what looks like it will be recovery, then says:
# Manual Mode #
-- Updating Application
Then a minute or so later it reboots right back to the GT7+ splash screen and stays there...
Twist:
So, knowing what I did last time, I installed Odin and the Samsung drivers on my POS computer at home, booted into Download Mode, and did the "PDA" option with the correct FW (same as I used last time for the T869 from SamMobile, I saved all the files). It runs through just fine, gets to the end and the Tab reboots. It then goes into recovery and and does a few things (I believe it said it was deleting the cache and a few other processes). Then, lastly, it again says:
"# Manual Mode #
-- Updating Application
... followed by a reboot, and back to hanging on the boot logo.
Any ideas?!? Ironically, I put it on CL today to see if I can sell it for enough to cover a Nexus7. I woke up to an offer, and a bricked Tab. Figures.
Any thoughts/help are greatly appreciated. The sooner the better. lol
Is it possible that I need to flash a good recovery in Odin? If so, what's the procedure. and can someone link me to the one I would need for the US TMobile 4G version of the GT7+?
Also, since flashing the stock FW isn't fixing anything, and it seems like a possible Recovery issue, a friend at work is suggesting I choose the option in Odin to delete the partitions.
Thoughts??? (quickly)
Damn dude, again?
I think there is 3 or 4 threads about this on this forum and same amount on 7.7 forum. None come to a cause our solution, seems like people repeats some procedures and out of nothing it works again.
When it happened to me a let its battery drain fully to the point it won't turn on anymore let it this way for some time. Then fully charged, this is a little harmful to your bat, for the record. Then try to turn on, it will take some time but eventually it could enter on the system.
I think the data partition got corrupted.
Sent from my GT-P6210 using Tapatalk 2
Yup.
So, I tried the option in Odin to re0make the partition, and every time I try it fails with an error of "Can't Open Package" (or something along those lines).
I have reinstalled the FW through Odin no less than 10 times, nogo. The first time I open recovery after flashing, It says it is installing a package, clearing cache, etc, and the last line always says "-- Updating Application". After 10-15 seconds, that goes away and it reboots only to hang on the GT7Plus splash screen again. Then, any time I go into recovery after that first post-Odin instance, if says:
"# Manual Mode #
-- Updating Application
Should I be trying to reinstall Recovery? If so, what do I use (link)? Also, how do I do that in Odin...
I believe that for use remake partition you have to provide the pit file if your stock does not have it.
Anyway I did that also about 3 times, providing the pit and the md5, they flashed ok, but the problem was the same. Did you tried the battery thing? Some guy give a tip to start with the usb plugged.
Sent from my MB525 using Tapatalk 2
leodfs said:
I believe that for use remake partition you have to provide the pit file if your stock does not have it.
Anyway I did that also about 3 times, providing the pit and the md5, they flashed ok, but the problem was the same. Did you tried the battery thing? Some guy give a tip to start with the usb plugged.
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
Where was that tip? Link?
Also, any one have that .pit file I can try with?
http://forum.xda-developers.com/showthread.php?p=28574760
Sent from my MB525 using Tapatalk 2
Hey buddy..
Which fw u using? T869 came shipped with 2 different, search for both of them and try each one...don't use repartition without the correct pit file...
Maybe not here but I google sgh-t869 factory and found a website with both tar
Sent from my Galaxy Nexus using xda app-developers app
statuzz said:
Hey buddy..
Which fw u using? T869 came shipped with 2 different, search for both of them and try each one...don't use repartition without the correct pit file...
Maybe not here but I google sgh-t869 factory and found a website with both tar
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I'm not sure which file it is that I'm using, I'll have to look at home in a couple of hours. This happened to me a few weeks ago (link in original post), and I flashed this FW with Odin and it recovered, and has been fine since (till now), so I know it's at least a usable FW. I'll try to find the other one today.
I just tried finding the stock pit file for the TMo SGH-T869, but I can't find it. Anyone have a link to it by chance? Also, once I get it, what do I do (options to choose) in Odin to flash it?... and do I do it at the same time as the FW?
Thanks for any help! I was really hoping to sell it in the next day or two to fund the Nexus7, so now I'm really frustrated.
ETA: Also, I let it completely die, to the point it wouldn't boot. Then charged it for a bit and booted. Same issue.
I think that if u find the pit file they should be flash at the same time...fw in pda and pit in phone...(this need to be check to confirm) after flashing.. reboot into factory recovery wipe everything and try to boot
Hopefully u fix that today
Sent from my Galaxy Nexus
When it happened to me, i flashed the pit first and at the same with stock with re partition checked, didnt help. I did everything that I could find and I feel like it only worked again by itself
You can look every single thread of this exact problem, the ones that got it back working can't really say how, they flash everything many times and it suddenly works.
The good things are that flash the stock ones don't increase you flash count, and as long as you can enter download mode you are not really s#%
Sent from my MB525 using Tapatalk 2
Thanks for the help...
Anyone have a link to the .pit for this model (T869)?
Also, I had a thought. When I go into Recovery, I get the following and then it reboots again:
# Manual Mode #
-- Updating Application
1. Is it possible that recovery is hosed, and overwriting it with a fresh version will allow me to wipe the device, set to factory and then boot? Maybe this is the issue?
2. Is it even possible to just flash a fresh copy of the recovery over whatever is there (or replace it)?
2.a. If it is possible, what file should I use, and do I do it though Odin? Anyone have a link to what I should use?
Thanks :good:
VisualOddity said:
Thanks for the help...
Anyone have a link to the .pit for this model (T869)?
Also, I had a thought. When I go into Recovery, I get the following and then it reboots again:
# Manual Mode #
-- Updating Application
1. Is it possible that recovery is hosed, and overwriting it with a fresh version will allow me to wipe the device, set to factory and then boot? Maybe this is the issue?
2. Is it even possible to just flash a fresh copy of the recovery over whatever is there (or replace it)?
2.a. If it is possible, what file should I use, and do I do it though Odin? Anyone have a link to what I should use?
Thanks :good:
Click to expand...
Click to collapse
The problem is that there's is not development for t869 so there's not much to look for...just factory images and root method
Sent from my Galaxy Nexus
Can anyone link me to the proper pit file? Also, in the linked thread a few posts back, there are a couple of files, will those work for this?
Can someone post the proper pit file for me so I can repartition? I'm doing this on my wife's phone because my internet at home is down till tomorrow...
Lastly, recovery. Since when I go into recovery it says "manual mode" then reboots, can I replace recovery only? Then I can wipe and whatnot in it and maybe that will do the trick. If so, can someone link me to the proper recovery and tell me how to do it in Odin? What happens if I watch the FW flash, then right after it completes the recovery portion, I unplug it? Bad?
VisualOddity said:
Can anyone link me to the proper pit file? Also, in the linked thread a few posts back, there are a couple of files, will those work for this?
Can someone post the proper pit file for me so I can repartition? I'm doing this on my wife's phone because my internet at home is down till tomorrow...
Lastly, recovery. Since when I go into recovery it says "manual mode" then reboots, can I replace recovery only? Then I can wipe and whatnot in it and maybe that will do the trick. If so, can someone link me to the proper recovery and tell me how to do it in Odin? What happens if I watch the FW flash, then right after it completes the recovery portion, I unplug it? Bad?
Click to expand...
Click to collapse
i think u should forget about the pit file, couz the firmware have the pit repackage with the tar, im gussing u will only need the pit file in case u want to change the phone partitions, try to get those 2 fw and try them :good:
That's why I'd like the pit file, so I can check the option in Odin to re-partition.
So, I have internet at home now. I have now tried again letting it completely die, then completely charge, same issue. I have also tried 2 different versions of the SGH-T869 firmware.
Any thoughts?
Also, given what I have done so far, I posted this yesterday, any thoughts?
"Lastly, recovery. Since when I go into recovery it says "manual mode" then reboots, can I replace recovery only? Then I can wipe and whatnot in it and maybe that will do the trick. If so, can someone link me to the proper recovery and tell me how to do it in Odin? What happens if I watch the FW flash, then right after it completes the recovery portion, I unplug it? Bad? "
Yes. Unplug is bad. Possibly fatal. you should be able to.find a stock recovery.img in a stock Odin.tar, flash it with heimdall. Recommend factory reset beforeand after doing so.
I dont know about tmobile tabs but international ones look to apply CSC files after displaying that manual mode message. Perhaps something has gone awry with a CSC,etc.
chrisrotolo said:
Yes. Unplug is bad. Possibly fatal. you should be able to.find a stock recovery.img in a stock Odin.tar, flash it with heimdall. Recommend factory reset beforeand after doing so.
I dont know about tmobile tabs but international ones look to apply CSC files after displaying that manual mode message. Perhaps something has gone awry with a CSC,etc.
Click to expand...
Click to collapse
Thank You. A few questions:
Would that stock recovery.img have to be model specific. i.e. for the SGH-T869, or could it be from any GT 7 Plus (or is it generic on all devices with HoneyComb)? I *think* from experience it has to be T869 specific, but it's worth asking.
Also, about Heimdall, where do I get that, and how do I use it to flash? I've heard of it, but never used it.
Lastly, about the CSC files. That makes sense seeing as what it's doing, so that *could* be the whole issue. How can I overcome that? Can I download and flash those files somehow? Do you have a link to them?
Thanks for the help everyone. I'm hoping that in doing all this, maybe whatever ends up fixing this will be a guide for everyone else having the issue...
OK, I saw a couple of you guys mention the 7.7 people having this issue, so I went there to research. If I am reading right, it *sounds* like this could be a solid mix of a data system being corrupted, and the stock recovery (Samsung e3?) being bad.
Someone mentioned that you can pull the stock recovery.img from a the firmware, make a .tar with only that, then flash that. Once that's done you can do a full wipe in recovery, flash the full FW, and hopefully be back in business.
I want to try this, and if it works, maybe we will have a proven solution for the people getting this issue. However, not only have I never created a .tar, I have especially never created a flashable .tar, so...
What do I do? Other than pulling the recovery.img from the FW, how do I do this?
So long story short, my tab was running stock ICS (rooted, with temp CWM/cwm.zip). I decided to try a new rom (paranoid android) so I backed up everything via CWM and I flashed the new rom. But I forgot to do a factory reset before doing so which resulted in a bootloop. I returned to CWM to try to restore the previous ROM, all seemed to be fine and the tab restarted but was also bootlooped. Now I can't even access the stock recovery to acess CWM, I get an error message:
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC code : THL
Successfully applied multi-CSC
E :failed to mount / system (invalid argument) <in red.
Is there anything I can do to return to my stock ROM?!
Do I have the Brick Bug?
rumpypumpy said:
So long story short, my tab was running stock ICS (rooted, with temp CWM). I decided to try a new rom (paranoid android) so I backed up everything via CWM and I flashed the new rom. But I forgot to do a factory reset before doing so which resulted in a bootloop. I returned to CWM to try to restore the previous ROM, all seemed to be fine and the tab restarted but was also bootlooped. Now I can't even access the stock recovery to acess CWM, I get an error message:
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC code : THL
Successfully applied multi-CSC
E :failed to mount / system (invalid argument) <in red.
Is there anything I can do to return to my stock ROM?!
Click to expand...
Click to collapse
Can it get into download mode? If so try flash a stock rom with odin. Im not a sgt user but i am a samsung phone user and usualy when i forget to wipe all i have to do is go back into recovery. Then wipe everything and flash the same rom. NEVER go straight to a backup unless you pass setup. Then it can create a link almost so it supports going back. Or so thats what ive been told by devs on other forums...sounds kinda wierd tho but anyway if you forget to do something while flashing roms then go back indo recovery and do it again
Sent from the phone of Gamers
gmaster1 said:
Can it get into download mode? If so try flash a stock rom with odin. Im not a sgt user but i am a samsung phone user and usualy when i forget to wipe all i have to do is go back into recovery. Then wipe everything and flash the same rom. NEVER go straight to a backup unless you pass setup. Then it can create a link almost so it supports going back. Or so thats what ive been told by devs on other forums...sounds kinda wierd tho but anyway if you forget to do something while flashing roms then go back indo recovery and do it again
Sent from the phone of Gamers
Click to expand...
Click to collapse
It loads the amination for the stock recovery, then I get the error message I posted above. I need to get onto the stock recovery to get into CWM. Im not too sure what to do at the moment...
rumpypumpy said:
It loads the amination for the stock recovery, then I get the error message I posted above. I need to get onto the stock recovery to get into CWM. Im not too sure what to do at the moment...
Click to expand...
Click to collapse
Thats a messege saying the system has broke basicly because you went straight to a backup. Download mode and odin are your only hope
Sent from the phone of Gamers
gmaster1 said:
Thats a messege saying the system has broke basicly because you went straight to a backup. Download mode and odin are your only hope
Sent from the phone of Gamers
Click to expand...
Click to collapse
I forgot about download mode. I'll have a go then I'll report back.
Thanks
Now I'm stuck at the "<ID:0/005> factoryfs.img" stage!
I'm a bit scared of unplugging the tab, what would be the best thing to do now?
EDIT: If I flash a kernel or CWM, would this solve my problem?
Thanks in advance
EDIT:I managed to get CWM working, a step in the right direction
rumpypumpy said:
Now I'm stuck at the "<ID:0/005> factoryfs.img" stage!
I'm a bit scared of unplugging the tab, what would be the best thing to do now?
EDIT: If I flash a kernel or CWM, would this solve my problem?
Thanks in advance
EDIT:I managed to get CWM working, a step in the right direction
Click to expand...
Click to collapse
From CWM wipe data, cache & dalvik & reboot.
And flash this ICS zip file from CWM. if yours is 6800.
http://forum.xda-developers.com/showthread.php?t=1796866
rumpypumpy said:
Now I'm stuck at the "<ID:0/005> factoryfs.img" stage!
I'm a bit scared of unplugging the tab, what would be the best thing to do now?
EDIT: If I flash a kernel or CWM, would this solve my problem?
Thanks in advance
EDIT:I managed to get CWM working, a step in the right direction
Click to expand...
Click to collapse
If cwm works then we both know theres hope
Sent from the phone of Gamers
lsherif said:
From CWM wipe data, cache & dalvik & reboot.
And flash this ICS zip file from CWM. if yours is 6800.
http://forum.xda-developers.com/showthread.php?t=1796866
Click to expand...
Click to collapse
I did everything you said, but the progress bar has been stuck at 75% for over an hour, this has happened with all the ROMs I've tried to install. Is there anything else I could do? I red somewhere that a low battery doesn't allow ROMs to be installed properly.
Although I have no idea of my battery life, I'm just gonna leave it to charge for a bit. I hope everything turns out fine eventually
rumpypumpy said:
I did everything you said, but the progress bar has been stuck at 75% for over an hour, this has happened with all the ROMs I've tried to install. Is there anything else I could do? I red somewhere that a low battery doesn't allow ROMs to be installed properly.
Although I have no idea of my battery life, I'm just gonna leave it to charge for a bit. I hope everything turns out fine eventually
Click to expand...
Click to collapse
Battery life has nothing to do with it. People just say make sure you have high battery incase something happens. I think that it might be a very expensive brick now. Unless anyone else knows then i habe no idea
Sent from the phone of Gamers
gmaster1 said:
Battery life has nothing to do with it. People just say make sure you have high battery incase something happens. I think that it might be a very expensive brick now. Unless anyone else knows then i habe no idea
Sent from the phone of Gamers
Click to expand...
Click to collapse
:crying:
I was reading the following articles:
http://www.xda-developers.com/android/samsung-diligently-working-towards-hardbrick-fix/
http://forum.xda-developers.com/showthread.php?t=1810954
Could this Brick Bug be the source of my problems?
I was running a leaked version of ICS AND I have been using the cwm.zip so there is the possibility
Being unable to flash through either Odin or CWM surely sounds a lot like the brickbug.
If I were you, I'd reboot to download mode, and install a full ROM with repartition + PIT file. If it works, install locerra's CWM (it's one of the few recoveries for our tablet that's confirmed to be brickbug-free), and work as usual. But remember to wipe everything before installing anything through CWM...
If Odin doesn't work, you probably have been hit by the brickbug. However, all is not lost: this guy seems to have found a "fix" for many devices. It involves giving up on all your data and making your onboard storage a couple of GB smaller than it used to be, but it can make your device work again. Read the thread, try to understand it, and (if you can't find another way out) use the PIT file for the GT-6800 provided. If your tab isn't the international WiFi+3G GT-P6800, you may have to ask the guy (hg42) for a PIT tailored to your device.
The other option, in the case of a eMMC-related brick, is to remove all traces of CWM, go to a Samsung store and repair it under warranty, saying "its broke down when I were running that backie upppe thing in kies".
The other option is the better one, as i bricked my note. When i am able to revive it, i am left with 8GB space and it seems real laggy. Change a new motherboard would be better if still cover undr warrantly.
Sent from my GT-P6800 using xda premium
Thanks for the replies guy.
I have decided I will return it as faulty, in the hope it is repaired. I haven't been able to boot into CWM anymore, only the download mode, so I am guessing it is fine to return it as it is?
Thanks
rumpypumpy said:
Thanks for the replies guy.
I have decided I will return it as faulty, in the hope it is repaired. I haven't been able to boot into CWM anymore, only the download mode, so I am guessing it is fine to return it as it is?
Thanks
Click to expand...
Click to collapse
If I were you, I'd return it to something as close to stock as possible.
One suggestion: grab the latest Odin-flashable ROM for your country. You'll get a .tar.md5 file, such as P6800UBLA2_P6800ZTOLA2_ZTO.tar.md5. Try to flash it through Odin, just to see if it works; if it doesn't, write down the name of the .img file that gave you problems. If it works, congratulations, you have your tablet back, and you can stop reading.
Now, Rename that file to .tar (or, remove the .md5 extension), and open it in WinRAR/7zip/whatever. You'll see a lot of .img files inside, including the one that gave you problems. Remove it, and try to flash this new .tar file. If the flash works, proceed to the next paragraph. If it doesn't, write down the name of the .img file that gave you problems, and repeat this paragraph using your new .tar file.
After a flash that works, your device should be as close to stock as possible. Maybe it will even boot, but I wouldn't count on it (try anyway). I'd send it to the repair centre only when it is at this stage.
Steve_max said:
If I were you, I'd return it to something as close to stock as possible.
One suggestion: grab the latest Odin-flashable ROM for your country. You'll get a .tar.md5 file, such as P6800UBLA2_P6800ZTOLA2_ZTO.tar.md5. Try to flash it through Odin, just to see if it works; if it doesn't, write down the name of the .img file that gave you problems. If it works, congratulations, you have your tablet back, and you can stop reading.
Now, Rename that file to .tar (or, remove the .md5 extension), and open it in WinRAR/7zip/whatever. You'll see a lot of .img files inside, including the one that gave you problems. Remove it, and try to flash this new .tar file. If the flash works, proceed to the next paragraph. If it doesn't, write down the name of the .img file that gave you problems, and repeat this paragraph using your new .tar file.
After a flash that works, your device should be as close to stock as possible. Maybe it will even boot, but I wouldn't count on it (try anyway). I'd send it to the repair centre only when it is at this stage.
Click to expand...
Click to collapse
The tab gets stuck at 'factoryfs.img'. I'm a bit cautious since it is the biggest file in the .tar. Isn't the tab 'stock' stock enough as it is?:silly:
rumpypumpy said:
The tab gets stuck at 'factoryfs.img'. I'm a bit cautious since it is the biggest file in the .tar. Isn't the tab 'stock' stock enough as it is?:silly:
Click to expand...
Click to collapse
Thats...a...problem...if it takes longer then 15 mins its bricked...i have been a gt user and devs on other sites told me it was bricked. Maybe there is a solution but...i havnt found one. It should never take too long on one thing in odin.
Sent from the phone of Gamers
rumpypumpy said:
The tab gets stuck at 'factoryfs.img'. I'm a bit cautious since it is the biggest file in the .tar. Isn't the tab 'stock' stock enough as it is?:silly:
Click to expand...
Click to collapse
Even so, flash the other .imgs. You want to be closest to stock, including the recovery (imagine the guys at the Samsung centre manage to enter recovery, just to see CWM: your warranty is now gone). Having all partitions on stock, or at least most of them, can only help your case.
Steve_max said:
Even so, flash the other .imgs. You want to be closest to stock, including the recovery (imagine the guys at the Samsung centre manage to enter recovery, just to see CWM: your warranty is now gone). Having all partitions on stock, or at least most of them, can only help your case.
Click to expand...
Click to collapse
The warrenty is not void unless they find proof of tampering with system files. So basicly yeah...everything that guy said. Get it as close to stock as possible and send.
Sent from the phone of Gamers
Right OK, I definately don't want my warrenty void!
So would it be ok if I flashed 'P6800OXALQ1_P6800XXLQ1_HOME.tar.md5' (minus the factoryfs.img) to my tab?
Thanks
I was attempting to root and unlock my S3 tonight, I flashed the VRALEC.bootchain.tar.md5 and odin said it was done and had the reset! pop up. I shut down odin and waited for my phone to restart. It did not. Now i sit here with my S3 that will not turn on, the screen does not light, the led does not glow and i cant get it to enter odin/download mode or recovery. All i did was the first step and it broke. I've had this phone for 2 days please help me fix this...
TechieMonkey said:
I was attempting to root and unlock my S3 tonight, I flashed the VRALEC.bootchain.tar.md5 and odin said it was done and had the reset! pop up. I shut down odin and waited for my phone to restart. It did not. Now i sit here with my S3 that will not turn on, the screen does not light, the led does not glow and i cant get it to enter odin/download mode or recovery. All i did was the first step and it broke. I've had this phone for 2 days please help me fix this...
Click to expand...
Click to collapse
When you flashed in odin, did you use pda? If not there's your fisrt mistake.
Please read forum rules
Questions and help issues go in Q&A
Thread moved!
Sorry i panicked and wrote this in the first forum i could find lol
but yes i used pda, i had Auto Reboot and F. Reset Time checked as well
It doesnt turn on, no led, and it will not vibrate as i hold the power button (or any combo with the power button) to say its turning on and i just cant see anything either. Im literally getting no response from the phone.
TechieMonkey said:
Sorry i panicked and wrote this in the first forum i could find lol
but yes i used pda, i had Auto Reboot and F. Reset Time checked as well
It doesnt turn on, no led, and it will not vibrate as i hold the power button (or any combo with the power button) to say its turning on and i just cant see anything either. Im literally getting no response from the phone.
Click to expand...
Click to collapse
This is a Verizon GS3? Hard bricks are fairly rare but the usual cause of hard bricks is wrong firmware (international gs3 vs. US) or an interrupted process. From what you typed, it seems like you did everything right. Shouldn't be a corrupt file either if the md5 checked out
yeah its a verizon s3, i followed the instructions to a T and im freaking out that i cant get it to even vibrate or hit recovery mode. i'd love to just reset it and try again with the root... i dont really care about anything on it, its practically new and there isnt really much on it anyways. so deleting stuff isnt an issue
Have you tried pulling the battery? I just ran though the whole process without a hitch.
---------- Post added at 10:27 PM ---------- Previous post was at 10:24 PM ----------
TechieMonkey said:
I was attempting to root and unlock my S3 tonight, I flashed the VRALEC.bootchain.tar.md5 and odin said it was done and had the reset! pop up. I shut down odin and waited for my phone to restart. It did not. Now i sit here with my S3 that will not turn on, the screen does not light, the led does not glow and i cant get it to enter odin/download mode or recovery. All i did was the first step and it broke. I've had this phone for 2 days please help me fix this...
Click to expand...
Click to collapse
The file should be VRALEC.bootchain.tar.tar you didn't extract it did you? See in the quote in red.
the guide that i used gave me that kind of file, all i did was download and install it the way that they told me... this is the link that i used...
http://droidviews.com/2013/root-and...erizon-galaxy-s3-sch-i535-android-4-1-14-1-2/
idk if im allowed to post a link to a different site, if not im sorry for that >.<
Try this..... http://forum.xda-developers.com/showthread.php?t=1840030
so i've been doing more digging... i think im hard bricked... is there an easy way to fix this (and cheap?) i cant afford to do the mobiletech site as im in college and havent been getting more than 5 hours a week for a long time... I'm really panicking, my dad was giving me crap about not rooting/unlocking bootloaders so i didnt accidentally do just this and now i messed it up :/
TechieMonkey said:
the guide that i used gave me that kind of file, all i did was download and install it the way that they told me... this is the link that i used...
http://droidviews.com/2013/root-and...erizon-galaxy-s3-sch-i535-android-4-1-14-1-2/
idk if im allowed to post a link to a different site, if not im sorry for that >.<
Click to expand...
Click to collapse
Didn't read your link but then try this once you get it booting. Download the file from the links here and you will be good to go..... http://forum.xda-developers.com/showthread.php?t=2046439
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
question
I did this same thing. Since I bricked it flashing the vrelac boot chain and didn't actually flash a recovery or ROM does that trip the flash counter at all?????
roothead said:
I did this same thing. Since I bricked it flashing the vrelac boot chain and didn't actually flash a recovery or ROM does that trip the flash counter at all?????
Click to expand...
Click to collapse
Anyone ?
roothead said:
I did this same thing. Since I bricked it flashing the vrelac boot chain and didn't actually flash a recovery or ROM does that trip the flash counter at all?????
Click to expand...
Click to collapse
You can get the phone into download mode? If so, follow the thread I linked in post #9, download the files from that thread and follow the directions exactly. It will not brick you phone. I had just got done rooting and unlocking, using that guide, the other night when you posted this thread.
mefloump said:
You can get the phone into download mode? If so, follow the thread I linked in post #9, download the files from that thread and follow the directions exactly. It will not brick you phone. I had just got done rooting and unlocking, using that guide, the other night when you posted this thread.
Click to expand...
Click to collapse
The phone is bricked, no download mode, no recovery, nothing.MOD EDIT: DELETED FOR FRAUD DISCUSSION
Did you check the MD5checksum?
andybones said:
Did you check the MD5checksum?
Click to expand...
Click to collapse
No I didn't but should have obviously. It doesn't matter why I bricked the phone, it went back already. I was just wondering if they will be Able to tell I tried to flash something
roothead said:
No I didn't but should have obviously. It doesn't matter why I bricked the phone, it went back already. I was just wondering if they will be Able to tell I tried to flash something
Click to expand...
Click to collapse
well that's 99.9% the problem right there.
when flashing things that could brick your phone, radios, recovery, ESP bootchain!
double check that MD5, but hey I've done the same, and now I ALWAYS check it on everything even little things, lesson learned the hard way for me.
glad you'll be getting new phone..
and for about flashing prob not, I have sent back 2 SG3's rooted with TWRP recovery, but that's me..
I even brought one to VZW and she was going to do a factory reset reading from the screen and it brought her to TWRP recovery LMAO! her and the manager looked at each other like WTF, and STILL gave me a brand new phone uotta the box.
Rather than start a new thread, I'm just going to bump this one. I had this same problem. I followed the instructions from the XDA article, along with the ones provided in DroidModd3rX's YouTube video exactly on my VZW GS3, build JZO54K. I hard bricked my phone. It only showed up in the Device Manager on Windows 8 as QHSUSB_DLOAD. It was stuck like that as soon as I flashed the VRALEC Bootchain. Is there something I've done wrong that I could have done differently to prevent it from happening? I had just purchased it the day before, so I was able to get a replacement, but I'm highly interested in rooting my device and want to ensure this doesn't happen again. Is it a problem with Windows 8, is it the build my phone is running on, or is it perhaps because I had USB Debugging checked on? I just find it odd that I had the same problem, and went through it the same day as the person who started this thread. And yes, I did check the MD5, it was fine.
Rooted S3
odin to 4.0.4
upgraded all the way through 4.3 mistakenly
rebooted the phone
soft brick
fixed
now my google sync will not work for anything, market, hangouts, calendar...
any suggestions?
Danielswhite said:
Rooted S3
odin to 4.0.4
upgraded all the way through 4.3 mistakenly
rebooted the phone
soft brick
fixed
now my google sync will not work for anything, market, hangouts, calendar...
any suggestions?
Click to expand...
Click to collapse
did you try a factory reset?
I did several factory resets...
when you first log into your google account do you have your backed up data restored?
yes, then no, then another google account, then a new google account
If you feel up to it maybe you should try to odin or vzw repair one more time.
will do right now...
still no love...
That sucks! All I can say is I did the same thing you did but am not seeing any problems. Well the internet browser crashed on me but that is not a big deal. Hope you get this worked out.
Here's a really random suggestion, are you trying to sync over wifi? Have you tried syncing over 3g/lte? Just a shot in the dark.
tried both...
whats the difference?
Danielswhite said:
tried both...
whats the difference?
Click to expand...
Click to collapse
As long as I've been around the Q/A section, there's always an out of the box suggestion that works for that one person. That's why I suggested that. From what I recall, there haven't been too many resolved cases of Google sync errors. I did a search for "account sync" and I didn't see any working resolutions for others.
Could you attach a screenshot or two of the sync error you receive? When you go into Settings/Google/Your Account Name, where are your errors displaying for?
ive given up, i am going to wait until the bootloader is unlocked, im afraid i may have some 4.2 elements mixed with 4.3 and thats why im up this creek.... for now... an old phone...
Danielswhite said:
ive given up, i am going to wait until the bootloader is unlocked, im afraid i may have some 4.2 elements mixed with 4.3 and thats why im up this creek.... for now... an old phone...
Click to expand...
Click to collapse
You should not have any 4.1.2 elements sticking around on 4.3 if you Odin flashed the VRUCML1 tar that @ThePagel was referring to. It wipes /sdcard clean.
Edit: If you stumble onto a solution, don't hesitate to post back what it was.
This is a risky thing to try. But your choice I was having trouble with a few things after I bricked mine. So I did a mandatory erase with Odin then restarted in d/l mode and used the upgrade assistant to recover. Mine was a hard brick and did the Img boot so i had to keep my SD card inserted or it wouldn't boot but after the nand erase and the recover I'm working just fine
llarryweaver said:
This is a risky thing to try. But your choice I was having trouble with a few things after I bricked mine. So I did a mandatory erase with Odin then restarted in d/l mode and used the upgrade assistant to recover. Mine was a hard brick and did the Img boot so i had to keep my SD card inserted or it wouldn't boot but after the nand erase and the recover I'm working just fine
Click to expand...
Click to collapse
is there a walkthrough for this?
llarryweaver said:
This is a risky thing to try. But your choice I was having trouble with a few things after I bricked mine. So I did a mandatory erase with Odin then restarted in d/l mode and used the upgrade assistant to recover. Mine was a hard brick and did the Img boot so i had to keep my SD card inserted or it wouldn't boot but after the nand erase and the recover I'm working just fine
Click to expand...
Click to collapse
So when you have the bootloader on the sd card you can get into download mode?
QUOTE=ThePagel;48944124]So when you have the bootloader on the sd card you can get into download mode?[/QUOTE]
http://forum.xda-developers.com/showthread.php?t=2586319 here is a guide for soft brick and hard brick
I know that thread well
tried the vzw tool three times and odin four times...
Okay, so I'm having this problem where my phone get stucks in a bootloop when I flash back to stock.
The only way it gets out of bootloop, is if I install root. The problem is I'm trying to go back to stock firmware for now, but my phone refuses to get out of the Samsung logo every single time I try and run stock.
My guess is it might have something to do with the partition.
I notice when I'm doing a factory reset/wipe.
It has consistently said how it can't mount, and I'm guessing something is wrong with my partition, because I got the right firmware for my phone. It's N-902T.
If anyone has advice on this, I'd greatly appreciate it. Right now, I have no choice but to run a rooted phone until I figure out a way to get back to stock.
Ive never seen this before
[email protected] said:
Ive never seen this before
Click to expand...
Click to collapse
Yeah, I've never seen this before either. But I've tried multiple times to simply factory reset/wipe and flash stock.
It simply stays on the Samsung logo every single time. Correct firmware and everything... I even tried smart switch and it didn't help either...
Staying rooted is the best thing you can do did you flash the wrong firmware
Sent from my SM-N920T using Tapatalk
Anthony092 said:
Yeah, I've never seen this before either. But I've tried multiple times to simply factory reset/wipe and flash stock.
It simply stays on the Samsung logo every single time. Correct firmware and everything... I even tried smart switch and it didn't help either...
Click to expand...
Click to collapse
Do this:
Backup your stuff you need first!!!
Flash root
Flash TWRP
FULL WIPE!!! EVERYTHING. Every single partition that shows, cache, internal, system, data...everything. Do it x3.
ODIN stock firmware
Jammol said:
Do this:
Backup your stuff you need first!!!
Flash root
Flash TWRP
FULL WIPE!!! EVERYTHING. Every single partition that shows, cache, internal, system, data...everything. Do it x3.
ODIN stock firmware
Click to expand...
Click to collapse
I'll try and do it and let you know how it goes.
Anthony092 said:
I'll try and do it and let you know how it goes.
Click to expand...
Click to collapse
@Jammol is correct. This method should work. Going back to stock after being rooted almost always requires a full factory reset for our device. I had to do it on my phone.
Jammol said:
Do this:
Backup your stuff you need first!!!
Flash root
Flash TWRP
FULL WIPE!!! EVERYTHING. Every single partition that shows, cache, internal, system, data...everything. Do it x3.
ODIN stock firmware
Click to expand...
Click to collapse
Akw6190 said:
@Jammol is correct. This method should work. Going back to stock after being rooted almost always requires a full factory reset for our device. I had to do it on my phone.
Click to expand...
Click to collapse
I did it, didn't work for me. Still stuck at the Samsung logo, wiped everything too..
Just to add, a few more things I did notice.
After I flashed, My System Binary is listed as Samsung Official, but the System Status is still listed as Custom, this is after I flash Stock.
Then When I go back into Recovery, to another wipe just in case after flashing, it keeps saying.
DM-Verification failed......
Need to check DRK fist...
Also says E:failed to mount/preload (No such file or directory)
Anthony092 said:
I did it, didn't work for me. Still stuck at the Samsung logo, wiped everything too..
Click to expand...
Click to collapse
Alright, try this method:
Flash latest stock firmware in ODIN
Once it's done flashing, reboot to stock recovery
do a factory reset from stock recovery
It should boot after that. This is the method I used.
---------- Post added at 10:39 PM ---------- Previous post was at 10:35 PM ----------
Anthony092 said:
Just to add, a few more things I did notice.
After I flashed, My System Binary is listed as Samsung Official, but the System Status is still listed as Custom, this is after I flash Stock.
Then When I go back into Recovery, to another wipe just in case after flashing, it keeps saying.
DM-Verification failed......
Need to check DRK fist...
Also says E:failed to mount/preload (No such file or directory)
Click to expand...
Click to collapse
In this case, use the method I posted above, but try re-downloading the latest firmware for your device from sammobile.com and flash that. It should overwrite all of your partitions and then simply require a factory reset from stock recovery to boot. If that doesn't work, you may need to flash the PIT file for your device, which I'm sure can be found somewhere around here. I'm not sure the exact method to do that, however.
Akw6190 said:
Alright, try this method:
Flash latest stock firmware in ODIN
Once it's done flashing, reboot to stock recovery
do a factory reset from stock recovery
It should boot after that. This is the method I used.
Click to expand...
Click to collapse
I tried already, didn't work, but I'll keep looking to see if I can fix it. The minute I Put root back on my phone, it immediately started working, however every single time I try to go back to stock, it never gets past the Samsung Logo, No matter how many times I do a wipe. Plus, I don't understand why it keeps showing my device as custom, but the binary as samsung official, after I'm flashing stock...
Anthony092 said:
I tried already, didn't work, but I'll keep looking to see if I can fix it. The minute I Put root back on my phone, it immediately started working, however every single time I try to go back to stock, it never gets past the Samsung Logo, No matter how many times I do a wipe. Plus, I don't understand why it keeps showing my device as custom, but the binary as samsung official, after I'm flashing stock...
Click to expand...
Click to collapse
Hm. Unfortunately this is beyond my realm of comprehension. I've read that flashing the PIT file could help, but I don't know how to do that, unfortunately. I'd do some research on that if I were you.
Anthony092 said:
I tried already, didn't work, but I'll keep looking to see if I can fix it. The minute I Put root back on my phone, it immediately started working, however every single time I try to go back to stock, it never gets past the Samsung Logo, No matter how many times I do a wipe. Plus, I don't understand why it keeps showing my device as custom, but the binary as samsung official, after I'm flashing stock...
Click to expand...
Click to collapse
Try this. Go into developer mode and see if your oem unlocking is off. Turn it on. Make sure you have Odin version .7 and make sure you update to the latest firmware for you device.
Akw6190 said:
Hm. Unfortunately this is beyond my realm of comprehension. I've read that flashing the PIT file could help, but I don't know how to do that, unfortunately. I'd do some research on that if I were you.
Click to expand...
Click to collapse
Well you tried, thank you I appreciate the help nonetheless. I'll try and research it more, for now I'll just stay rooted and explore and find options to fix it, enjoy your day.
Anthony092 said:
Well you tried, thank you I appreciate the help nonetheless. I'll try and research it more, for now I'll just stay rooted and explore and find options to fix it, enjoy your day.
Click to expand...
Click to collapse
You too, buddy. If you figure it out, report back and let us know. It may help someone in the future.
guaneet said:
Try this. Go into developer mode and see if your oem unlocking is off. Turn it on. Make sure you have Odin version .7 and make sure you update to the latest firmware for you device.
Click to expand...
Click to collapse
My OEM is on, I'm downloading the lastest firmware. I'll report back with my results
Anthony092 said:
My OEM is on, I'm downloading the lastest firmware. I'll report back with my results
Click to expand...
Click to collapse
Here is a link to the latest firmware just in case. Really fast download compared to sammobile
http://forum.xda-developers.com/showthread.php?p=64366446
guaneet said:
Here is a link to the latest firmware just in case. Really fast download compared to sammobile
http://forum.xda-developers.com/showthread.php?p=64366446
Click to expand...
Click to collapse
Thank you, very much appreciated it. I'll download from there instead =)
I've been pondering this one all day. It shouldn't be a corrupt storage device that's now dead because it would work regardless of root or not. The pit file suggested earlier should do the trick as it writes over all partitions of your device.
Another thing. It says both official and custom in download mode is an indication that something get wiped. What firmware have you been trying to flash with odin
S?ent from my SM-N920T using Tapatalk
Jammol said:
I've been pondering this one all day. It shouldn't be a corrupt storage device that's now dead because it would work regardless of root or not. The pit file suggested earlier should do the trick as it writes over all partitions of your device.
Another thing. It says both official and custom in download mode is an indication that something get wiped. What firmware have you been trying to flash with odin
S?ent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
I was flashing N902TUVU2COI5, however I'm going to try and flash the latest firmware and see how it goes.
Unfortunately, I haven't found anything exactly telling me how to the pit file, so I'm for now going to stay away from that...just waiting for the latest firmware to download and I'll flash it and post my results.