[Q] Custom recovery Huawei Ascend G6-t00 - Huawei Ascend G6

Hello guys,
I bought from China the Huawei Ascend G6 - t00 which has Mediatek processor. I could root it, but I cannot install any custom recovery, I tried using MTK droid tools and SP flash tool.
When I put the usb and press vol Down button the smartphone opens the bootloader section. Anyone have unlocked it?
I'd like to put a custom recovery...
Thanks.

Hello....can you tell me the way to root the huawei g6? Because i can t find a tutorial to do it.....i have a huawei g6 u00 do you think is similar to your device? Tnx
Sent from my HUAWEI G6-U10 using XDA Free mobile app

Root Huawei Ascend G6
Successful rooted my Huawei Ascend G6 with Towelroot.
:laugh:

Carelse said:
Successful rooted my Huawei Ascend G6 with Towelroot.
:laugh:
Click to expand...
Click to collapse
Which version of the Ascend G6? And which version of Towelroot?
With the 1st version of Towelroot i got problems with the internal memory being not readable/writable.

Towelroot
ArnoJeroen said:
Which version of the Ascend G6? And which version of Towelroot?
With the 1st version of Towelroot i got problems with the internal memory being not readable/writable.
Click to expand...
Click to collapse
I have used version 2 from www,towelroot,com for my Huawei Ascend G6-U10.
You can read your internal memory with Root Explorer.

Carelse said:
I have used version 2 from www,towelroot,com for my Huawei Ascend G6-U10.
You can read your internal memory with Root Explorer.
Click to expand...
Click to collapse
I know I can use Root Explorer for this.
But the system itself can not read or write to the internal storage after using TR. For examle: the camera-app says ïnternal storage is full (but it is not). The explorer does not show any files on internal storage (but there are some files).
After unrooting with SuperSU everything is normal again.

rooted with Vroot
I rooted my G6 U00 with Vroot, now I am also looking for a good Rom and how to flash it..

maoper said:
I rooted my G6 U00 with Vroot, now I am also looking for a good Rom and how to flash it..
Click to expand...
Click to collapse
nothing on XDA about the G6 but go here chinese site ,everything about G6, use google translate :
http://cn.club.vmall.com/forum-324-1.html

Huawei Ascend G6-l11 4G
Hi,
Huawei Ascend G6-L11 4G
I've searched for this but can't find anything. I got this phone a couple of weeks ago and have managed to root it with Towelroot. Are there any plans for development of custom roms/recovery, unlock bootloader etc. Can't find anything any where ?
Thanks

hookey17 said:
Hi,
Huawei Ascend G6-L11 4G
I've searched for this but can't find anything. I got this phone a couple of weeks ago and have managed to root it with Towelroot. Are there any plans for development of custom roms/recovery, unlock bootloader etc. Can't find anything any where ?
Thanks
Click to expand...
Click to collapse
None of you (except for ArnoJeroen ) found any problems after rooting?
on my gfs G6 it roots fine, with towelroot (latest) but somehow I have a few problems.
with EX explorer I cannot edit (and save) any system files
my SDcard is somehow mounted as SDCARD1 instead of SDCARD0 which causes a lot of applications/functions to stop working.
some piece of memory (8xxMB iirc) gets mounted as SDCARD0, when checking with EX filexplorer, this piece of memory seems empty...
after removing SuperSU (with its buildin uninstal root funtion) everything is back to normal...

Bootloader unlock
Carelse said:
I have used version 2 from www,towelroot,com for my Huawei Ascend G6-U10.
You can read your internal memory with Root Explorer.
Click to expand...
Click to collapse
Hey bro is there any need to unlock bootlooder if yes then how ???

Faraz007 said:
Hey bro is there any need to unlock bootlooder if yes then how ???
Click to expand...
Click to collapse
Request your bootloader unlock code:
send to:[email protected]
Model: Ascend G6-***
IMEI:
S/N:
ID:
where to find:
model: Settings -> About phone -> modelnumber
IMEI: *#06# or box
S/N: battery or box
ID: *#*#1357946#*#*
you will receive your your unlock code in 3 business days.
(for faster reply add a picture of your battery+ box with serialnumber.
if you have the code, follow this tutorial: https://www.youtube.com/watch?v=-bO-NeQBGss

where to download CWM / TW & for huawei g6?

Tested only on models G6-U10 and G6-U00! Requires an unlocked bootloader!
Instructions:
1. Download and unpack the contents of the ADB in the root of drive C [Download]
2. Download the CWM [Download] or TWRP [Download]
3. Copy the downloaded file to the root folder ADB
4. Connect your phone to the computer in Fastboot (Bootloader).
5. When holding the Shift key, right click on the folder ADB and select the "Open Command Window"
6. At the command prompt, enter without the quotes "fastboot flash recovery cwm.img" (Where there is marked in blue, enter the name and extension of your file)
7. Press Enter and you're done. (Phone can be loaded into Recovery mode follows on the machine is off, hold down the VOL + and Inclusion)
Original recovery Huawei G6-U10 [Download]
Original recovery Huawei G6-U00 [Download]
I am sorry but I can not add links, I have 10 messages please write me an email^ [email protected]
I have a custom firmware for models G6-U00, G6-C00.

Huawei g6 root
how i rooted:
1) enabled development mode by trapping settings > about phone> build number many times until it said am a developer. then in settings developer options i enabled usb debugging
2)installed kingo root on pc and rooted via usb
How i solved sdcard issues
i noticed there were 2 sdcards. There is an internal and external sdcard. internal sdcard is sh*t has little memory and some apps like opera mini not seem to be detecting it. Yet its the default!!! so i made the external sdcard default by going to settings > device > more > storage > default storage location and i chose sdcard instead of internal memory.
Dont know if it helped but also installed sdcard fix from.next app in the android market(requires root )
restart phone and now every thing normal

Related

[Q] Help!!! How to root + customize your ZTE V985 device

Originally Posted by suunnittelija View Post
I was able to root my ZTE V985 couple days ago. Download root installation package from:
http://pan.baidu.com/share/link?shar...&uk=2753639880
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
http://bbs.gfan.com/android-5226211-1-1.html
And Google translation:
http://translate.google.com/translat...26211-1-1.html
THE DEVICE IS NOW SUCESSFULLY ROOTED PLEASE POST ROMS/CUSTOMISATIONS/CWM/MODS + GUIDES ALSO AND ANY OTHER INFO ON THIS PHONE! THANKS.
alz_uk said:
Originally Posted by suunnittelija View Post
Click to expand...
Click to collapse
After rooting, you can download Google Play installer from here:
http://pan.baidu.com/share/link?shareid=126684&uk=1176017033
After installing, run this app. Slide blue button from Google Play logo to the phone logo. See attached picture.
suunnittelija said:
After rooting, you can download Google Play installer from here:
http://pan.baidu.com/share/link?shareid=126684&uk=1176017033
After installing, run this app. Slide blue button from Google Play logo to the phone logo. See attached picture.
Click to expand...
Click to collapse
Man your awesome, I was just about to get to that problem and what do you know took the words right outta my mouth.
HELP!!! Need ENGLISH recovery mode for chinese ZTE V985
Hi all, someone please post information on replacing the ZTE V985 chinese stock recovery mode to ENGLISH recovery mode!!!!!!
BUMP!
Bump!
alz_uk said:
Hi all, someone please post information on replacing the ZTE V985 chinese stock recovery mode to ENGLISH recovery mode!!!!!!
Click to expand...
Click to collapse
I found custom recovery from here:
http://pan.baidu.com/share/link?shareid=271693&uk=973327405
I think it is in Chinese, I have not installed it yet.
Does anyone knows that is it possible to build new recovery by using http://builder.clockworkmod.com/ and does it change the language to English?
I tried that tool by using Chinese recovery.img. It created new recovery.img successfully without any errors, but I have not tried it yet. Is it safe to use? I used builder just with recovery.img but without recovery.fstab because I wasn't able to find it.
What if the device fails to boot? I do have original firmware on .zip file, but not sure is it possible to boot and install original firmware from SD card.
ZTE stock recovery is actually in english !!!!
alz_uk said:
Hi all, someone please post information on replacing the ZTE V985 chinese stock recovery mode to ENGLISH recovery mode!!!!!!
Click to expand...
Click to collapse
My bad didnt check beforehand, it seems the stock recovery mode on the zte v985 is actually in english which allows to flash roms from zip files placed on the root directory of the micro sd card.
To enter ZTE Recovery Mode do as follows: Firstly power off device then Hold down volume down key and then hold down power key, when the zte logo appears on screen let go of the power key but still keep the volume down key held you will enter zte recovery mode which will allow you to wipe data, update from micro sd card etc.
Hope this helps.
alz_uk said:
Originally Posted by suunnittelija View Post
I was able to root my ZTE V985 couple days ago. Download root installation package from: DEAD
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
DEAD
And Google translation:
DEAD
THE DEVICE IS NOW SUCESSFULLY ROOTED PLEASE POST ROMS/CUSTOMISATIONS/CWM/MODS + GUIDES ALSO AND ANY OTHER INFO ON THIS PHONE! THANKS.
Click to expand...
Click to collapse
Hi, all links are dead for rooting ZTE grand Era. Does someone have valid links please ?
Thank you.
O_Neill31 said:
Hi, all links are dead for rooting ZTE grand Era. Does someone have valid links please ?
Thank you.
Click to expand...
Click to collapse
hello, anyone knows if exists any ROM for the v985 in 4.1 or miui v5?
david_gn7 said:
hello, anyone knows if exists any ROM for the v985 in 4.1 or miui v5?
Click to expand...
Click to collapse
4.1.2 update was released today. Here's the direct link for download:
http://pan.baidu.com/share/link?shareid=3082485858&uk=3442944625
It's recommended to update first from B03 to B04 and then do the 4.1.2 update. Here's the link for 4.0.4 B04:
http://pan.baidu.com/share/link?shareid=3921007642&uk=3945654451
How to do 4.1 update. Remember to backup first!:
1. Download V985_update_4.1.2.7z upgrade package file and unzip the file. Under the folders there's update.zip.
2. Copy update.zip to the external SD card root directory
3. Enter the "Settings" -> "System Software Updates" -> "Storage card upgrade." and uncheck "retain user data upgrade". If this is checked, it will cause some issues and the phone might not boot.
4.Click the OK button to upgrade. Upgrade process starts automatically after a few seconds.
Root & recovery:
http://pan.baidu.com/share/link?shareid=4088477952&uk=1178049129
How to root ZTE V985 4.1.2 Jelly Bean
Hi, it seems that ZTE has brought a new android version to the V985 called 222200B1329ZTE V985V1.0.0B04.
I have a V985 with android 4.0.4 version B03 installed, rooted and equipped with Gapps. I can only upgrade into stock which removes my root and Gapps.
Can anyone tell me how to root the V985V1.0.0B04 android 4.1.2 version?
Thanks
I was able to compile and run fully working clockworkmode recovery from CM10.1 stream,
I was also able to compile and port CM10.1 to this device. Currently thinking if we could port CM10.2 to this device.
CM 10.1
moskvicheff said:
I was able to compile and run fully working clockworkmode recovery from CM10.1 stream,
I was also able to compile and port CM10.1 to this device. Currently thinking if we could port CM10.2 to this device.
Click to expand...
Click to collapse
I will look forward for your posts, I'm very interested about CM 10.1 on my V985, great job! :good:
edusturke said:
I will look forward for your posts, I'm very interested about CM 10.1 on my V985, great job! :good:
Click to expand...
Click to collapse
Thanks!
I'm currently stuck with Wifi, I also have kernel sources for this device. Let me know If you'd like me to post the link on it.
I'm looking for any assistance in porting Cyanogen mod to this device to make it fully operational.
P.S. I neet at least 10 posts to be able to post links
Regards,
Sergey
Phone won't start!
I have installed 4.1.2 update on my v985, but it was draining my battery very fast, i tried to install back to B04, but it was not working, i couldn't install. Then i tried to install Clockwork Recovery and now phone won't start, iz just turns on ZTE logo and stops!
Help please!! Is there anyway to unbrick my phone?
Phone is something like read only
I have a v985. I received it rooted, but a lot of message was in Chinese an it did not download my contacts from gmail.
I've flashed all ROMs that I found, finaly I'm stuck in "enterprise_V985_signed_101613_1017.zip".
Google play does not start. It just flashes up.
I have a Chinese application search app, where I can install apps. It seems to be installed, but the app is nowhere.
I can boot into recovery, but I can't wipe or format at all. Nothing.
I can run "install zip", it loads the zip, the commands are started, it writes that it is OK, but does not change the phone at all.
The strand that I can make photo, it is saved, I can copy files to phone and to sd card...
What can be the problem?
hello there! It seems to be quiet here, did someone solve the problem? I have also this zte version, all things is working correctly except the battery, the current rom is ics 4.0.4 v985v1.0.0B03, the android system consumes itself about 50% of battery everyday even when the phone is in standby, I would like replace the kernel with a new one, if someone has some ideas I'm very interested. :good:

[GUIDE]Root Qmobile Noir A2 Classic

Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)
I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
 @bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:
I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again
najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread
bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored
can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space
AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app
Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one
root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?
bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?

Upgrade & Root

Guys, I have HUAWEI Ascend G610. It has JB 4.2.1. I wanna upgrade it to the 4.4 KitKat and also wanna root it, can anybody know about it??
Sent from my HUAWEI G610-U20 using xda app-developers app
Anybody??
Sent from my HUAWEI G610-U20 using xda app-developers app
How to Root
To root your android phone (any for that matter )
P.S. : If your device ends up with thermonuclear war or if your device becomes a very expensive paperweight then do not point your finger, understand the risks of rooting before continuing
Step 1: Download Kingo Root for Windows
Step 2: In your android settings switch on USB Debugging
Step 3: Attach the Android Phone to USB and Root your Phone
Done!!!
I HAVE NO IDEA ABOUT THE ROM'S BUT THIS IS ABOUT THE ROOT
TechniColor_Windows said:
To root your android phone (any for that matter )
P.S. : If your device ends up with thermonuclear war or if your device becomes a very expensive paperweight then do not point your finger, understand the risks of rooting before continuing
Step 1: Download Kingo Root for Windows
Step 2: In your android settings switch on USB Debugging
Step 3: Attach the Android Phone to USB and Root your Phone
Done!!!
I HAVE NO IDEA ABOUT THE ROM'S BUT THIS IS ABOUT THE ROOT
Click to expand...
Click to collapse
Thanks for this, anybody more know about it?
I'm waiting for working method.
Sent from my HUAWEI G610-U20 using Forum Fiend v1.2.7.
How to root huawei ascend g610
I AM NOT RESPONSUBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE
1 . Download the Framaroot application
2 . Copy it to your sdcard & Install on your Ascend G610.
3 . Open the framaroot application after installing.
4 . Choose the “SuperSU” from the dropdown menu.
5 . Select “Boromir or Barahir” which is the exploiting method. And you will see the following text: “Success, Superuser and SU binary installed.”
Reboot your devices.
Ascend G610 should now be rooted successfully. To confirm the phone is rooted, install Root Checker app available for free at Google Play Store. :laugh::laugh::laugh::laugh:

Step By Step How to Upgrade G6 - L11 to B370

>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY IT AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So, you need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->->extract dload folder from B118
->paste in to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->extract dload folder from B370.
->Delete dload from B118 from the external sd card and paste the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
---------> Or you can find it with DC-Unlocker
1. Download DC-Unlocker but only this version works, install it and reboot :
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
http://consumer.huawei.com/minisite/HiSuite_en/
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4. It need to enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode" (IF OPEN THE MENU TO CHOOSE THE USB CONNECTION PRESS RETURN TO GO BACK TO CONFIRME)
"CORFIRME"
And Reboot the phone,.
5. Connect Phone to usb (MY DEBUG MODE WAS ON AND USB FLASH DRIVE WAS SELECTED) and open DC UNLOCKER.
6. Select Huawei Phones in manufacturer and leave the model Auto detect
7. Click on the magnifing glass and wait for detection
8. You will see the bootloader code appears in the BOX bellow.
9. Use this software and the unlock bootloader option, 18 option:
https://mega.nz/#!S95yRYbY!vxh7daocU-_q4bXb4cu88b_UMqybJxt8Fh24z9mmcck
----------------------------------------
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
persona78 said:
>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->Extract to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->Delete dload from B118 and extract to external sd card the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
Click to expand...
Click to collapse
I followed instructions and flashed B370. Now my home button is not working
You have G6 L11?
persona78 said:
You have G6 L11?
Click to expand...
Click to collapse
G6-L33
"the same as L22 and L11"
Sorry, Its the same is true, but this is for Europe and files are diferent from Colombia, thats way the issue..
It does not work in L22 and L33 , although it is the same phone with the same kernel, but the provider configuration is totally different, frequencies , network codes, etc.
I did not know because no one yet with these models had reported , I found this incompatibility shortly ...
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\
works great . thanks a lot man
i updated to B370 successfuly, everything working fine except Motion Control. when i go to "Motion Control" in Settings, there is nothing there (a blank white screen).
I remember this problem was in P6 EMUI 3 too and a patch was there to fix it. any patches for G6?
Same thing goes rong. Sensors must work! Or pictures rotate?
If not, flash b118 again, than b370. Don't forget factory reset after change cust folders names.
:good:
Excellent guide, you did a summary of four different things in one and easy to understand. For your mastery of the subject I wanted to ask your help to use my Huawei G6-U00 with firmware of China, which has unlocked WCDMA 1900 MHz band, so I can not use the phone in 3G in Venezuela.
Is there a way to unlock it?
I have tried to Engineer Mode, but it asks a code that is not known Huawei (0, 0000, 1234), . Also I tried the QPST program, but despite being recognized as a modem, do not read as a telephone and does not communicate with the RF_NV_Item_Manager.
Thanks in advance!!
Mario
Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).
oemsbl version list check error!
persona78 said:
Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).
Click to expand...
Click to collapse
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?
marioarnaldo1965 said:
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?
Click to expand...
Click to collapse
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One
Oesmble problem
persona78 said:
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One
Click to expand...
Click to collapse
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!
marioarnaldo1965 said:
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!
Click to expand...
Click to collapse
After you do backup with g6sknife, there is a tool you can use, is the rom extractor, is in g6skinfe to.
Extract system, cust modems.
Copy system to cmd folder, boot in fastboot (bootloader), use cmd option, than flash system if fail you need to restore your backup, because you stay with out system, if you get success, put cust and modems in backup zip and use cwm to flash it. If you get success to, you need to change cust to your provider.
Sent using XDA One
G6_L11 problem after update...
Hello...
I have a G6-L11, Digitel Venezuela ...
Since I did ROM upgrade, the gyroscope and proximity sensors do not work, either lighting and ...
What can I do..??
problem with g6 rom
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?
freduce said:
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?
Click to expand...
Click to collapse
First, if you have a U10 why you flash a U00 ROM? ...
Google G6 U10 b146, try to install it.
Tell if you made it?
G6 ROMS
There are a lot of steps to do.. Open Bootloader, Root the Phone, Install Custom Bootloader, Flash a new Rom for G6-U10.
All these Steps are full Explained in GG Development Group in Facebook.
Send a request join message, and in Pinned Post. Read , read and read. There are a lot of information and a ROM that fit your ROM. What does it mean UE in your Question? United States? Union Europa´s? the ROMS are quite different.
.....
some of these links have been 'removed'
please
can you like please fix the link
:good:

[PE-TL10] [BOOTLOADER] Alternative procedure to unlock bootloader

Hello!
For all of PE-TL10 Honor 6 Plus people, this is a procedure I tried to unlock the bootloader.
As you know, you cannot anymore ask Huawei for the unlock code. If you like me are in this condition, try this procedure.
It is the same procedure you can find here: https://forum.xda-developers.com/p8lite/general/alternative-method-unlocking-bootloader-t3799294
with just a little edit for this device. So full credits must go to @@NayeBunny. Well done mate!
CAUTION: YOU WILL LOSE ALL OF DATA. DO A BACKUP FIRST!!!!
STEP 1 - Rollback
You need to be on Lollipop 5.1.1., EMUI 3.1. I tried this procedure in firmware B332.
If you are already on Marshmallow, EMUI 4.0, then do the following:
- go to https://www.hihonor.com/my/support/phones/honor6plus/
click on the choice menu "HONOR 6 Plus Dual SIM 3GB+32GB (PE-TL10)"
You will find 2 options which are equal. Choose the second one (will return more firmwares to download)
Click on Firmware Download
Download BOTH HONOR 6+ RollBack Package Android Marshmallow to Android Lollipop and HONOR 6 Plus Firmware (PE-TL10, Android 5.1.1, EMUI 3.1, C900B332, South Pacific, Channel-Others)
You will find instructions anyway the procedure is this:
- unpack the Rollback package and extract the UPDATE.APP file into a "dload" folder which must be in the root of your INTERNAL STORAGE (I have read various posts about putting it in the sdcard*, I put this in internal storage and worked)
* maybe because it is intended /sdcard/ , anyway not the external storage.
- turn off phone
- press vol+ vol- and power togheter (you can release power button when the Honor logo appears, but keep the volume buttons pressed until you get the EMUI update screen
When it's done, unpack the UPDATE.APP of the other package and put in the dload folder of the phone (of course delete the previous one!)
Do the force update procedure as before.
STEP 2: Root
We need to be rooted.
I used Kingroot for it: https://forum.xda-developers.com/devdb/project/dl/?id=29834
You can find instruction here: https://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
STEP 3: the magic code
Now we are all set up, you need to activate USB Debug first (or download a ADB package as in the first link I provided).
Just go to Settings - Phone info and click repeatedly on Series Number (the second line, below model number) until you get developer options turned on.
Go back, open Developer Options and turn USB Debug on. Authorize your computer when you connect the USB cable.
Now, do this:
Code:
adb shell
Then
Code:
su -c "grep -m1 -aoE 'WVLOCK.{14}[0-9]{16}' /dev/block/mmcblk0p6 |grep -aoE '[0-9]{16}'"
(here is the difference, the code info is in mmcblk0p6 in this phone)
If all goes well it will be returned a quite long number. Copy it.
Exit the shell (typing "exit", pressing CTRL+D...) and then
Code:
adb reboot bootloader
And finally
Code:
fastboot oem unlock ****************
in place of the stars paste the number you got.
I did this procedure and I unlocked my bootloader. Let me know if it works for you!
I hope this can help people to develop good ROMs for this great device!
Sorry for the necro.. but does this method works on Honor 6A Pro for unlocking the bootloader ?
shah22 said:
Sorry for the necro.. but does this method works on Honor 6A Pro for unlocking the bootloader ?
Click to expand...
Click to collapse
Hi,
no idea... just have a try!
As per original post, the procedure to unlock bootloader should be equal for the P8 and for other Huawei devices (like the PE-TL10): maybe just the location of the code info could be different (mmcblk0p6)
can some one provide the links for same device please?
PE-TL10 area c185​I couldn't find no where!
osd_daedalus said:
Hello!
For all of PE-TL10 Honor 6 Plus people, this is a procedure I tried to unlock the bootloader.
As you know, you cannot anymore ask Huawei for the unlock code. If you like me are in this condition, try this procedure.
It is the same procedure you can find here: https://forum.xda-developers.com/p8lite/general/alternative-method-unlocking-bootloader-t3799294
with just a little edit for this device. So full credits must go to @@NayeBunny. Well done mate!
CAUTION: YOU WILL LOSE ALL OF DATA. DO A BACKUP FIRST!!!!
STEP 1 - Rollback
You need to be on Lollipop 5.1.1., EMUI 3.1. I tried this procedure in firmware B332.
If you are already on Marshmallow, EMUI 4.0, then do the following:
- go to https://www.hihonor.com/my/support/phones/honor6plus/
click on the choice menu "HONOR 6 Plus Dual SIM 3GB+32GB (PE-TL10)"
You will find 2 options which are equal. Choose the second one (will return more firmwares to download)
Click on Firmware Download
Download BOTH HONOR 6+ RollBack Package Android Marshmallow to Android Lollipop and HONOR 6 Plus Firmware (PE-TL10, Android 5.1.1, EMUI 3.1, C900B332, South Pacific, Channel-Others)
You will find instructions anyway the procedure is this:
- unpack the Rollback package and extract the UPDATE.APP file into a "dload" folder which must be in the root of your INTERNAL STORAGE (I have read various posts about putting it in the sdcard*, I put this in internal storage and worked)
* maybe because it is intended /sdcard/ , anyway not the external storage.
- turn off phone
- press vol+ vol- and power togheter (you can release power button when the Honor logo appears, but keep the volume buttons pressed until you get the EMUI update screen
When it's done, unpack the UPDATE.APP of the other package and put in the dload folder of the phone (of course delete the previous one!)
Do the force update procedure as before.
STEP 2: Root
We need to be rooted.
I used Kingroot for it: https://forum.xda-developers.com/devdb/project/dl/?id=29834
You can find instruction here: https://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
STEP 3: the magic code
Now we are all set up, you need to activate USB Debug first (or download a ADB package as in the first link I provided).
Just go to Settings - Phone info and click repeatedly on Series Number (the second line, below model number) until you get developer options turned on.
Go back, open Developer Options and turn USB Debug on. Authorize your computer when you connect the USB cable.
Now, do this:
Code:
adb shell
Then
Code:
su -c "grep -m1 -aoE 'WVLOCK.{14}[0-9]{16}' /dev/block/mmcblk0p6 |grep -aoE '[0-9]{16}'"
(here is the difference, the code info is in mmcblk0p6 in this phone)
If all goes well it will be returned a quite long number. Copy it.
Exit the shell (typing "exit", pressing CTRL+D...) and then
Code:
adb reboot bootloader
And finally
Code:
fastboot oem unlock ****************
in place of the stars paste the number you got.
I did this procedure and I unlocked my bootloader. Let me know if it works for you!
I hope this can help people to develop good ROMs for this great device!
Click to expand...
Click to collapse
It seems not working links anymore!
Hmmm...
Yes, I checked and those inks are linking elsewhere. Moreover, I can't find a mirror or another place hosting these files.
Sadly, I don't own amymore this phone and I deleted all of PE-TL10 files from my computer.
The only solution would be someone who downloaded these files, when they were available, to upload them somewhere.
My bad

Categories

Resources