Database Info

Desire s stuck after 2.3.5 update

i tried to update via phone (after the notification), but after green bar was full, my phone rebooted and stuck in white screen with htc logo... if i try to enter in recovery i see this
h*tp://i39.tinypic.com/xdxnc5.jpg
it seems to be s-off (i bought it used) ...what have i to do for make it work again??
tnx.. and sorry for my bad english

same problem here, help is needed!

A golden rule: never update OTA on a modified device (custom ROM even modified Stock one, custom Recovery, Revolutionary hboot!, etc.)
How to fix:
do not pull battery!
flash a custom recovery (e.g. 4EXT) with the fastboot command (search for a how-to)
reboot to recovery, wipe all partitions and install custom ROM

Ok, to late with the battery, have already pulled that one out!
I also have S-Off on my phone, really dont understand the how to fix a recovery??
And is it really neccessary to flash a new ROM for this?
An official release that screwes the phones up?

I think the general issue is that an 'Official' OTA upgrade should not screw up your phone - enough testing by HTC should make sure of that.
Hoever, if you have modified your phone (e.g. by rooting it, installing custom recovery etc) then you can not expect to blame HTC when their upgrade doesn't work as expected. They can't be held responsible for problems caused by modifications you make to the phone.

But all I have done is S-Off, I have not installed another ROM or anything else?
So the update should work I really think!
Can I install a custom recovery without have to be able to start the phone?

Akerhage said:
But all I have done is S-Off, I have not installed another ROM or anything else?
So the update should work I really think!
Can I install a custom recovery without have to be able to start the phone?
Click to expand...
Click to collapse
The OTA flashes a new hboot also.
If you S-OFFed with Revolutionary your hboot has to be version 6.98.000x. This hboot has a protection and cannot be overwritten. This is the point where the update process is interrupted. The result is a bootloop, because the new system is incomplete.
If you can boot to bootloader (hboot) you should be able to flash a custom recovery with the fastboot command (in the 4EXT Recovery thread there is an attachement - a zip file that contains recovery.img). Extract the archive and flash it with this command from cmd (there is a guide how to make fastboot working in my signature):
Code:
fastboot flash recovery {path to file on your PC}/recovery.img
If this works reboot to recovery, wipe all partitions and flash a custom ROM. Then your phone should be working again.
Then if you want the OTA flash a 0.98.2000 hboot, then use the 1.47.401.4 RUU (if you are using European unbranded) or the corresponding for your brand/region to return back to complete Stock and S-ON. Then you will be prompted to update and you will have the latest OTA on your device

Okay, I have now fixed the 4EXT Recovery and it is working!
Do I have to put a new ROM on the SD-card or is there another way to install a ROM (from cmd with the ROM on the computer etc?)
I dont have an adapter to the SD-card, but maybe I can put the ROM on the sdcard with a command in cmd aswell?
What ROM do you recommend to use? (sense, no sense doesnt matter)
Edit: I did a backup as well, thinking that I should do that...

Can you link to zip file you used for recovery i have exactly same issue and same software versions as you have.

@ Mooler. First of follow the guide that was posted here regarding the adb-drivers.
After that download this: http://forum.xda-developers.com/attachment.php?attachmentid=631186&d=1308596026
Then install that one as described with the cmd-command.
After that just put a custom ROM or a shipped ROM on the SD-card, wipe data/cache and install the ROM you want. That solved the problem for me!
Good Luck and thanks for the help I got here! Xda always delivers

Damn this phone! After hours of fixing with this problem!
I managed great, installed new kernels, radios, ROMs etc. And the first thing I did was to drop it on the floor so the whole damn display cracked!

Thanks for both of you.
I managed to restore the phone quickly after i got the correct recovery file. 30 mins and custom ROM was up and running. Good bye official update.
Akerhage: sad to here, it really was hours of reading and trying before you get it right.

Virtuous ROM: SuperCID and Firmware upgrade NOT needed?

The thread [GUIDE] A must read for those noobs who want to enjoy ICS states that ALL ICS roms need a firmware upgrade.
However, the installation instructions for the Virtuous ROM doesn't say anything at all about upgrading the firmware: http://www.virtuousrom.com/p/documentation.html
Which one is right?
Also, just to be on the safe side, is SuperCID needed?

The documentation page you linked is installation instructions for all Virtuous ROMs, so it's pretty generic. If you look at the description page for Virtuous Inquisition, which is ICS-based, the page does mention firmware. That ROM is based on the most recent 3.32 firmware, which is probably what you want to use. AFAIK, all ICS ROMs require firmware version of 3.12 or greater.
As for SuperCID, I think there are firmware downloads on the forums now that don't require it but it's also pretty easy to do.

pyrilium said:
The documentation page you linked is installation instructions for all Virtuous ROMs
Click to expand...
Click to collapse
Ahhh. Ok. That was the missing link. Thanks.
I have a rooted S-OFF Sensation 4G with the stock ROM and ClockWork. So all I need to do is:
Flash the Firmware that doesn't require SuperCID
Nandroid Backup / Wipe
And then I can flash Virtuous.
Is that correct?
Also, does flashing Firmware alone cause a wipe?

That is correct, although I would do your nandroid backup before you flash the firmware. I'm not sure that it will wipe the system partitions, but it might.
The only other thing is that it can be a pain to get back into recovery after you flash the firmware if you're not using adb, since whenever you boot into the boot loader it will detect the firmware (PG58IMG.zip) on your SD card and ask if you want to flash it. One solution is to remove PG58IMG.zip from the SD card using an SD reader after you do the firmware update, but if you have adb installed & working you can also simply issue the command "adb reboot recovery" when the phone is off. This won't work when you're in the bootloader, although there's probably an equivalent fastboot command.

pyrilium said:
That is correct, although I would do your nandroid backup before you flash the firmware. I'm not sure that it will wipe the system partitions, but it might.
The only other thing is that it can be a pain to get back into recovery after you flash the firmware if you're not using adb, since whenever you boot into the boot loader it will detect the firmware (PG58IMG.zip) on your SD card and ask if you want to flash it. One solution is to remove PG58IMG.zip from the SD card using an SD reader after you do the firmware update, but if you have adb installed & working you can also simply issue the command "adb reboot recovery" when the phone is off. This won't work when you're in the bootloader, although there's probably an equivalent fastboot command.
Click to expand...
Click to collapse
Wow, this is extremely helpful, thank you. One other thing: does it matter what version of ClockWork I'm using? (I rooted/did S-Off a loooooong time ago.)

Glad I can help!
I don't know whether the version of CWM matters. I doubt it would, other than maybe making a nandroid backup in a format other than current, but it's not that hard to update the recovery either.
I actually started using 4ext recovery recently, and I like it a fair bit better than CWM. It's something like $2.00 on the market, but includes a userspace application that lets you do things like set up a series of recovery operations (i.e. make backup, wipe, flash a set of zips) and then reboot into recovery to run them.

Perfect, thanks. I'll give this a shot.
Every few weeks I look up how to move to ICS but then lose my enthusiasm once I see all the things I'd have to do to switch haha. But today I noticed that Virtuous doesn't need some of those steps

One more question: SuperWIPE is unnecessary for Virtuous Inquisition correct? I see that it is necessary for Android Revolution, but I just wanted to make sure.

I've always seen superwipe recommended as part of the upgrade process from GB to ICS. It might not be required for Virtuous, but I don't see why you'd want to avoid it. The flashing process *will* wipe your phone - you want to use something like Titanium Backup to backup/restore app states if that's a problem - and performing the superwipe takes almost no time.

Woohoo! Successfully upgraded from stock Gingerbread (rooted & S-Off) to Virtuous Inquisition ICS! I wrote down what I did, so if anyone is interested, below is how I did it. It took about 15 minutes in total (not including the backups). Hopefully it helps someone else out there!
Titanium Backup all apps
Nandroid Backup via ClockWork Recovery (1434 MB)
Get CID Version:
Download ADB/Fastboot files from attachment from Post #1 of the [Firmware][Mar 12] thread
Connect phone to PC -> adb reboot bootloader -> Then in bootloader:
fastboot getvar cid: T-MOB010
fastboot getvar mid: PG5810000
fastboot reboot
Download the appropriate Firmware from above thread (CTRL+F for T-MOB010/PG5810000) and the Virtuous ROM from Virtous Website
Copy both files to sdcard, check md5 on both
Flash Firmware:
Turn phone off -> Hold Volume-Down + Power to enter bootloader
Wait for the firmware package to be found and confirm to update as prompted
Once completed successfully and asks you to reboot, pull the battery out. (Gingerbread & firmware are incompatible, causes bootloops)
With phone off and plugged into PC, do adb reboot recovery (Thanks pyrilium!)
Mount USB storage
Use PC to delete firmware file from sdcard
Wipe all data and cache -> Flash Virtuous -> Reboot
(Note that YES, flashing firmware causes bootloops -- as I found out! So firmware and ROM must both be flashed together.)
And thanks pyrilium for the note about using "adb reboot recovery" while the phone is off! I would have never figured that you could issue adb commands with your phone off. That tip isn't even in any of the guides, so thanks for that! Extremely helpful.
Anyway, hope that helps others out there. And thanks for helping me!

[Q] Paranoid noob question regarding S-off and previous Bootloader

I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much

fashofasho said:
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
when you did S-OFF in order to install Cyanogen JB first you had to flash the latest fw version and then the rom
the rom you tried to install requires the latest fw version
now are you still s-off?
what is now your hboot version?
what is your fw version?

I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.

Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
i got confused
.i think your answer is going for fashofasho

Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
Thanks for the reply. Okay so here is where I am currently at. I haven't done anything since I reflashed stock ROM throguh RUU after the fail cyanogen flash. On this stock ROM whenever I load into bootloader it still says s-off 1.17 but I did lose my clockworkmod. So according to your instructions I should either clockworkmod again or 4ext now, that's okay right? If so, going to flash firmware then cyanogen!! Or is there a problem that I have s-off but not recovery.
P.s. there is no point in running revolutionary and have it s-off again when I already have it right, just thought it might be necessary to make things fresh

If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app

Skipjacks said:
If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?

fashofasho said:
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?
Click to expand...
Click to collapse
flash su-2.3.6.3-ef-signed.zip first and then install 4ext recovery

You're over engineering this. You don't need to root your current ROM first. That's an extra step since you're s-off.
If you are s-off it's really simple to get 4EXT recovery.
First, download this and put it on the root directory of your SD Card (meaning not in a folder, just on the SD Card. Do not rename it)
http://d-h.st/qnm
I got this download link from here...
http://forum.xda-developers.com/showthread.php?p=21989107
Click Thanks for Joaquinf in that thread. He made the 4EXT zip that's flashable through the bootloader.
That is 4EXT made into a zip file that's flashable via the bootloader, which you can do when you are S-off.
So put that file on the SD card, power the phone off, pull the battery out for a second and put it back in (this stops fastboot so you can get back to the bootloader). Then hold volume down and power at the same time. You have to hit both buttons at the same time. If it goes to the splash screen, pull the battery and try again.
When the bootloader loads up it will immediately find the PM58IMG.zip file. It will ask you if you want to install the update. Say yes by hitting volume up I think (it will tell you how to say yes)
Put the phone down and don't touch it until it tells you it's done. Should just take a second. But seriously don't touch it. Leave it alone.
If that works, you've just flashed 4EXT. You can check it by pulling the SD card out (so it doesn't try to flash the PM58IMG again) and rebooting to the bootloader and selecting 'recovery' from the menu. 4EXT should boot up.
This entire process so far shouldn't take more than 3 minutes total. It just sounds like a lot.
To see this detailed out by someone else in case you want to check what I'm saying, read steps 4 and 5 of the first post in this thread.
http://forum.xda-developers.com/showpost.php?p=21989063&postcount=1
Give the author 'thanks' again because he's awesome and deserves it.
Now you've got 4EXT installed. Great. You're 1/3rd of the way home.
Now you need to update your firmware. Delete the PM58IMG.zip file you used to flash 4EXT off the SD card (use a card reader or boot the phone up and delete it, whatever works. You can also use 4EXT as a card reader now too by choosing USB storage from inside 4EXT. It will give you access toteh SD card on your computer now)
Now get new Firmware from this thread.
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
try the 3.33 firmware universal. First download link in post 2 of the thread above.
CHECK THE MD5 SUM!!!! I'M NOT PLAYING AROUND HERE!!! You are worried about bricking your phone, this is where you can do it if the firmware .zip is bad.
Put that PM58IMG file on your SD and flash it in the bootloader the same way you flashed 4EXT recovery a minute ago. (If you're still in 4EXT recovery you can use it's power menu to reboot into bootloader easily.)
This will take a minute. The phone will shut off and go black in the middle of this process. Your heart will skip a beat. Relax. It'll come back on. Again, put the phone down and walk away while it does it's thing and don't touch it until it says it's done.
Delete the PM58IMG file from your SD card.
You are now 2/3 of the way there. Your phone WILL NOT boot up right now because your ROM is not compatible with your firmware. Relax. That's supposed to happen.
Now you can flash CM10. Make sure you have the CM10.zip file on your SD card nad GApps. (Bruce has Gapps in his downloads page). Delete the PM58IMG firmware file from your SD card (that's important)
Pull the battery again so you can get back into bootloader. Get into bootloader (power + volume down)
Select Recovery
4EXT should boot up.
Go to the Wipe menu. Wipe all partitions except SD card. (Old ROM is now gone)
Go back to the main menu.
Install from SD
Find the CM10.zip file you should have downloaded and put onto the SD card. Flash it.
This will take about 3 minutes. 4EXT will flash it and ask if you want to reboot. You do not yet. Not you need to flash Gapps the same way you flashed the ROM.
When that's done, now you can reboot. You shoudl see the CyanogenMod boot animation after the splash screen. Give it a few minutes to boot up this first time. Once it boots, set it up the way you like it. If you enjoy it, donate a few bucks to the developer, Bruce.
You don't have to root CM10. It's already rooted when you boot it up the first time.

[Q] upgarde snaufu...

was running viperXL 3.2.5 and wiped and went to cm10.1 now i used goo manager to download xhata (sorry i butchered it) now i can only boot into spash screen and bootloader. i used fastboot to reflash twrp and still only boots to the custom spash... hboot 1.09 s-off..... im kinda lost here. should have syuck with viper, why screw with perfection.

What is xhata? Is it a rom?
I'm not sure we can install roms with Goo Manager on this phone.
If you installed a rom for the quad-core Tegra One X, your phone will not boot and you're lucky you didn't get a brick. You need to do a full wipe and reflash.

first off not a noob. it was the evita rom. i still have bootloader access and can get half way into recovery( spash screen then twrp spash...) then reboot into custom splash. it was the rom... http://forum.xda-developers.com/showthread.php?t=2075783 so if anyone has any ideas please help, just dont start with the usual u screwed up flashing roms i know better. and the odd part is after reflashing the recovery via fastboot i get Twrp spash before going back to the phone main splash and boot looping.... and yes im s-off

No need to be so defensive. If we don't know exactly what you flashed, all we can do is ask. Its not meant as an insult. But its always better to ask the seemingly "obvious" questions first, get them out of the way.
If there is a "usual thing" that gets mentioned, its because the mistake of flashing ROMs for the ENDEAVORU in fact happens so often. Downloading from GooManager is not a great idea either, and often a red flag that someone installed a ROM for the wrong version of the phone.
Did the phone operate properly when you were on CM10.1?
What version of TWRP, and what fastboot command did you use to flash it?

I asked the "usual" questions because:
-You have less than 100 posts. That's often a sign of someone who is new to this.
-You used a rom name I've never heard of, and suggested you weren't sure of the name yourself. That's usually a big red flag for someone who flashed some random rom they found via Google.
-You mentioned using Goo Manager. That's a non-standard method for this phone, and an awful lot of people have bricked their phones trying to flash roms through apps that aren't well-supported. CWM Touch was notorious for this when the One X first came out.
If you don't want people to assume things, you need to state them up front.
On topic: There appears to be a bug in the latest TWRP that causes issues for some people. Try rolling back to an earlier version.

iElvis said:
On topic: There appears to be a bug in the latest TWRP that causes issues for some people. Try rolling back to an earlier version.
Click to expand...
Click to collapse
Yeah, I saw that too, and why I asked the OP what version of TWRP.

i had problems with that rom on version 4.0.1 and 4.1.0 had alot of errors and trouble. i haven't tried 4.2.0 though, i have been having better luck with rom after clearing out recovery cache running "fastboot erase cache" and running only twrp 2.3.3.1.

i flashed the second to last release of twrp (latest gave mount issues), viper was running great, cm 10.1 avatar was running fine just didnt like how plain it was so i used goo manager to download hatkaXL and when the download finished i picked select and flash.. then the usual warning about flashing and it rebooted, hit spash screen where it still is hours later. i then tried manually boot into recovery, it hit the bootloader i selected recovery and it seemed to try and load. next step was back to fast boot and to reflash twrp (fastboot flash recovery recovery.img ) flashed 100% success and still wont boot into recovery just the bootloader, and i wasnt trying to get all defensive, i sent first post using the wifes phone and posted quick, had a guy hooking up my satellite at same time as phone crashed. has anyone tried the new version of cwm for the evita? maybe flashing that may get me back, i have roms and backups on the pc that i can seem to side load but never boot as well.

well after repeated flashing of recovery and (fastboot erase cache) it finally booted to recovery, now to see if my backup will load.

Android Revolution HD 7.3

Hey guys,
Having some problems with this ROM. I downloaded the ZIP, used Titanium backup to back it all up, and flashed the Rom with no problems at all...got through all the screens and whatnot, and upon launching for the first time it's stuck on the "Beats Audio" screen. Not really sure why or what happened. I'm coming from MIUI ROM and haven't had issues with flashing any other ROM before.
One thing I noticed is on the HD 7.3 first page there is a firmware update that you apparently need before you flash the ROM but all links are 404/not found.
Wondering if any of you pros can offer a hand?
-Cain

Cainsmoker said:
Hey guys,
Having some problems with this ROM. I downloaded the ZIP, used Titanium backup to back it all up, and flashed the Rom with no problems at all...got through all the screens and whatnot, and upon launching for the first time it's stuck on the "Beats Audio" screen. Not really sure why or what happened. I'm coming from MIUI ROM and haven't had issues with flashing any other ROM before.
One thing I noticed is on the HD 7.3 first page there is a firmware update that you apparently need before you flash the ROM but all links are 404/not found.
Wondering if any of you pros can offer a hand?
-Cain
Click to expand...
Click to collapse
post the output of this command
fastboot getvar all
don't show your imei and serial number
and what recovery do you have?

rzr86 said:
post the output of this command
fastboot getvar all
don't show your imei and serial number
and what recovery do you have?
Click to expand...
Click to collapse
In looking at my Hboot, it's old as sin....I'm using Revolutionary Hboot 1.17.1111 and Radio 10.14.9035.01_M
I run clockwork recovery mod v5.0.2.0 as well. This could be an issue causing the problem. I've been using the MIUI ROM for probably 2 years or so because I enjoyed it but I'm ready for a change. Apparently my phone doesn't agree. lol.
You want me to connect via USB and run the cmd prompt for the getvar command and let you know what it says?

Cainsmoker said:
In looking at my Hboot, it's old as sin....I'm using Revolutionary Hboot 1.17.1111 and Radio 10.14.9035.01_M
I run clockwork recovery mod v5.0.2.0 as well. This could be an issue causing the problem. I've been using the MIUI ROM for probably 2 years or so because I enjoyed it but I'm ready for a change. Apparently my phone doesn't agree. lol.
You want me to connect via USB and run the cmd prompt for the getvar command and let you know what it says?
Click to expand...
Click to collapse
there is no need to do it now
you gave me exactly what i need
you still have gb firmware that's why you can't boot ARHD 7.3(ics rom)
see this thread
http://forum.xda-developers.com/showthread.php?t=1459767
flash 3.33 universal
follow the instructions to the letter
and before flashing check md5 sums(important)

The speedy reply is much appreciated.
I'll go ahead and update the firmware and see where that lands me. I figured it could have been a problem from the get go but in the original thread for the HD 7.3 Rom the firmware link has been removed (likely since it was from 2011)
Thanks for the point in the right direction Rzr, and I'll let you know how it goes!
rzr86 said:
there is no need to do it now
you gave me exactly what i need
you still have gb firmware that's why you can't boot ARHD 7.3(ics rom)
see this thread
http://forum.xda-developers.com/showthread.php?t=1459767
flash 3.33 universal
follow the instructions to the letter
and before flashing check md5 sums(important)
Click to expand...
Click to collapse

Hmmm....the firmware update didn't work.
I can verify that I'm on the firmware 3.3, Hboot is 1.27.1100, Radio is 11.24A.3504.31_M.
Each time Hboot is run it asks if I want to start the update. If I select yes, I've got 9 on screen options that it runs through and tells me "Update complete. Press power to reboot" The only way to do anything at all is to take out the SD card so it does not try to load up the firmware zip
Pushing power reboots the phone on an endless boot loop. Regardless of what ROM is being used (I also downloaded cyanogenmod) I can not make it past the spash screen.
Could it be that I'm just flashing the ROM incorrectly? To my knowledge I've followed instructions for both and have backed up my phone and it's contents and done everything from a factory reset/wipe to wiping the dalvik cache, etc. I didn't have this many problems rooting my phone and putting on MIUI to begin with and have flashed ROMS before with no trouble....not really sure where I'm going wrong on this one.
Anyway, I'll await your reply.
Thank you!
-Cain
Update: awww frick. So now it looks like this will be more difficult....I hope you like a challenge. I can now no longer get into my phone. It appears that it's soft bricked. I have tried going to a clockwork mod recovery from my first MIUI in 2012, it goes through the entire process of factory resetting restoring the boot image, system and data information. It asks for a reboot which I do. It goes to the white HTC splash screen and the MIUI initializes and goes black immediately. There doesn't seem to be a way to get my phone connected to my computer to get into the SD card to troubleshoot from inside the phone. Hopefully one of you guys has the answer for me. Is there any way to get into it via bootloader usb?

Cainsmoker said:
Hmmm....the firmware update didn't work.
I can verify that I'm on the firmware 3.3, Hboot is 1.27.1100, Radio is 11.24A.3504.31_M.
Each time Hboot is run it asks if I want to start the update. If I select yes, I've got 9 on screen options that it runs through and tells me "Update complete. Press power to reboot" The only way to do anything at all is to take out the SD card so it does not try to load up the firmware zip
Pushing power reboots the phone on an endless boot loop. Regardless of what ROM is being used (I also downloaded cyanogenmod) I can not make it past the spash screen.
Could it be that I'm just flashing the ROM incorrectly? To my knowledge I've followed instructions for both and have backed up my phone and it's contents and done everything from a factory reset/wipe to wiping the dalvik cache, etc. I didn't have this many problems rooting my phone and putting on MIUI to begin with and have flashed ROMS before with no trouble....not really sure where I'm going wrong on this one.
Anyway, I'll await your reply.
Thank you!
-Cain
Update: awww frick. So now it looks like this will be more difficult....I hope you like a challenge. I can now no longer get into my phone. It appears that it's soft bricked. I have tried going to a clockwork mod recovery from my first MIUI in 2012, it goes through the entire process of factory resetting restoring the boot image, system and data information. It asks for a reboot which I do. It goes to the white HTC splash screen and the MIUI initializes and goes black immediately. There doesn't seem to be a way to get my phone connected to my computer to get into the SD card to troubleshoot from inside the phone. Hopefully one of you guys has the answer for me. Is there any way to get into it via bootloader usb?
Click to expand...
Click to collapse
remove the pg58img.zip from your sdcard so it won't scan and identify any pg58img.zip file
and don't restore your miui rom because probably is a gb one and now you have an ics firmware installed
just download an ics or jb rom
put it on your sdcard
full wipe from recovery
flash the rom
done

rzr86 said:
remove the pg58img.zip from your sdcard so it won't scan and identify any pg58img.zip file
and don't restore your miui rom because probably is a gb one and now you have an ics firmware installed
just download an ics or jb rom
put it on your sdcard
full wipe from recovery
flash the rom
done
Click to expand...
Click to collapse
With the phone being in a boot loop I can't get it detected by my computer to remove/add anything from the SD card. I do have the HD 7.3 ROM on and the Gapps that's required but it never makes it past the "beats audio" splash screen. I have no idea what's going on with it but will try any suggestions you've got up your sleeve.

Ahhhhh....I've gotten a fix for this!
I was unable to do anything because of the update zip which wanted me to update every time bootloader was initiated. By keeping my case off I removed my SD card to be able to boot in recovery and then put the SD card back in to load the HD 7.3 zip from the card. This seemed to take care of the problem.
Thanks for the help Rzr