Related
Hi.
After some changes It seems the new version of bandswitch is compatible with HTC Polaris. Bandswitch is used to swith from 2g and 3g quickly with only one click, enabling to save bettery keeping in 2g and using 3g when needed.
Dani
Thank you, provides very good this application
thank you guy , it seem it work very good on my cruise !
Nice
I couldnt test it on this device because I dont own one but It seems the system to change the band is the same than kaiser, instead of Hermes....So I ve modified it to behave like if It detects the device is kaiser...
Dani
i got a problem, when people try to reach me they automatically get my voice mail (in normal phone settings) i also have problems calling myself (stops a few times and then after trying again suddenly connects). same with messages long delays in receiving and sending...
after setting the band to GSM they can reach me but i have the idea that i cant use 3g????
is there a problem with the phones function t switch between 2g and 3g and do i need this app (bandswitch) for it or is there something with my phone or my opperator-settings?
Hi.
It is operator issues. I have same problem here in Spain with Vodafone. But this problem doesnt happen with Movistar. Being in 2g, if gprs is connected AND there is data flow in that moment then if someone call me it appears as phone turned off. Some friends of mine are telecomunication eng. in vodafone and says Its the sw version of the system, but not related with the pda or its configuration.
Greetings
Dani
ok, thnx
sw version of the system? (do u mean software..)
but is there something my operator can do so it works or must i keep on switching myself in my phone settings?
or do u suggest to use bandswitch?
yes,software.
HTC roms allows to change the band but the process is slows(many clicks). Because of this bandswitch was borned. In fact if you see the first post (in hermes forum) I was searching for a today plugin to switch quickly the band. I didnt find any and I developed this tool. Other operator rom doesnt provide a way to switch the band. Why? I suppose 3G generates more data traffic and more meney for telcos so they fix their devices to 2G. SO you have to use other tools (like bandswitch or commmgrpro) to change the band.
Greetings
Dani
Hello Daniel,
Should V2.5 work with a Cruise that uses the Murata radio?
I dont know that ROM. Today will be out V2.6 beta. In this version I ve changed the way to manage connections because some devices (htc touch, samsung i780) doesnt implement correctly some RAS functions so I hope management connections works for these devices too..
Testers for bandswitch v2.6
Its a beta.
Connection management didnt work correctly on this device because a known problem in some RAS API functions didnt implemented.
http://www.commmgrpro.com/CommMgrPro/files/BandSwitch.V2.6.cab
Changes:
1) Connections management(Stablish, close) has been replaced with IpHelper API so It should work with HTC Touch, Samsung i780 and others. Can you test it?. It would be nice if It was tested with currently working devices (tynt, hermes, ....) and not working devices (touch).
2) Keyboard appears automatically on license and text controls.
3) Unsintall process backed up registry settings to other registry place. It was causing in some devices error uninstalling. It has been solved. When you install old version It can cause error but continues with the installing process.
Greetings.
DAni
pd. Testers will have free license, of course
Testing? Yes!
Hey Dani!
I`ve just downloaded the cab and test it now.
How could I give my feedback?
Frank
Hi,
Here or by mail to [email protected]
Dani
Hi Dani,
i tested your program.
My device XDA Orbit2, O2 Germany, bepes rom 0.67.
worked well for me, only 2 small design issues.
1. every time when starting your program the "auto"-button is grey and not the button i selected before.
2. the "control-box" does not funktioned, only the "close app"-button.
greatings
ppcfox
sorry my worse english
ppcfox said:
Hi Dani,
i tested your program.
My device XDA Orbit2, O2 Germany, bepes rom 0.67.
worked well for me, only 2 small design issues.
1. every time when starting your program the "auto"-button is grey and not the button i selected before.
2. the "control-box" does not funktioned, only the "close app"-button.
greatings
ppcfox
sorry my worse english
Click to expand...
Click to collapse
Thanks ppc
another Buttonbug?
Hey Daniel!
I turned off the Speaker for 30 Minutes with the switcher. After that the speakerbutton shows "Speaker off".
And after a softreset the UMTS GSM Buttons show automatic, but i switched to GSM permanently.
So far
Frank
Nordlicht277 said:
Hey Daniel!
I turned off the Speaker for 30 Minutes with the switcher. After that the speakerbutton shows "Speaker off".
And after a softreset the UMTS GSM Buttons show automatic, but i switched to GSM permanently.
So far
Frank
Click to expand...
Click to collapse
Thanks Frank
When bs is shown the auto button is always focused because Its the first one but it doesnt mean the device is in auto mode. Look at the tray icon. g means gprs. a means auto, etc. I will take a look again to the speaker
Thanks!!
Touch Cruise rom udK R1:
I can't install it, keeps asking me for a serial number.
Once any version of bandswitch you ve 15 days to use it. The countdown doesnt stop even if you install other version. I will do a separate system for betas that doesnt watch if there was any other version installed some time...
2.6.1 works fine
Hey Daniel!
I just installed your new version and it works fine, the button behavior is fixed and i found no errors whit switching 2G/3G, speaker WiFi or BT.
All fine so far, but the beta expires in three days...
Frank
Hi Lads!
I'm experiencing problems with my HTC sensation. I've installed newest ROM and gapps from Albinoman887 (http://forum.xda-developers.com/show....php?t=2524961). My GPS works just fine if I'm using WiFi or data network, unfortunately I don't have an internet plan so I can only use WiFi when in range. No matter how long I would wait google maps (I've saved offline map) or Garmin/TomTom wont connect with GPS. I've tried to connect it in not urbanised area,were i wasn't surrounded by building or high trees.I was switching between 'device only' and 'assited with WiFi and network data' but since I don't have internet connection I think it makes no difference. I had this problem as well on - cm-10.1-20130610-Albinoman887-pyramid , but as I had internet plan wasn't bothered about that. Did you face similar problem ? Would you know how to fix that issue ?
Phone spec:
HTC Sensation
Android:4.4.2
Baseband ver: 11.69A.3504.00P_11.23..3504.07_M2
Kernel ver: [email protected]ox#1 Sat Jan 18 10:34:02 EST 2014
CyanogenMod ver: cm_pyramid-userdebug 4.4.2 KOT49H 39f88656cd test-keys
here it goes again...
Hi Lads,
I would like to add, that RIL is definitely correct (checked by getRIL app)
i have also amend GPS config files, I can't paste the content of the file, as it contains links to outside sources and I'm new user so I'm attaching configuration file.
unfortunately , nothing has changed
I've got an idea but i might be very stupid (please forgive me my ignorance), but I thought that as GPS was working fine on the stock ROM
maybe I could get it and export files responsible for managing GPS (radio files??) and swap them with existing ones on my system ? Or maybe its not worth ? what do you think lads ? I really hope you can help me out with my problem
best regards
Tom
chmurak said:
Hi Lads!
I'm experiencing problems with my HTC sensation. I've installed newest ROM and gapps from Albinoman887 (http://forum.xda-developers.com/show....php?t=2524961). My GPS works just fine if I'm using WiFi or data network, unfortunately I don't have an internet plan so I can only use WiFi when in range. No matter how long I would wait google maps (I've saved offline map) or Garmin/TomTom wont connect with GPS. I've tried to connect it in not urbanised area,were i wasn't surrounded by building or high trees.I was switching between 'device only' and 'assited with WiFi and network data' but since I don't have internet connection I think it makes no difference. I had this problem as well on - cm-10.1-20130610-Albinoman887-pyramid , but as I had internet plan wasn't bothered about that. Did you face similar problem ? Would you know how to fix that issue ?
Phone spec:
HTC Sensation
Android:4.4.2
Baseband ver: 11.69A.3504.00P_11.23..3504.07_M2
Kernel ver: [email protected]ox#1 Sat Jan 18 10:34:02 EST 2014
CyanogenMod ver: cm_pyramid-userdebug 4.4.2 KOT49H 39f88656cd test-keys
Click to expand...
Click to collapse
Use banks gapps. Search for banks gapps in xda or Google for links. GPS issues should be resolved.
Sent from my HTC Sensation using xda app-developers app
emperorsuresh said:
Use banks gapps. Search for banks gapps in xda or Google for links. GPS issues should be resolved.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Hi, thanks for you advice, i've cleared factory reset, partition cache, dalvik and installed Banks Gapps form http://forum.xda-developers.com/showthread.php?t=2012857, unfortunately I still can't use offline GPS
lil update
i have downloaded GPS Status, and i can't localize any satellites - even with internet connection - but at the same time google maps are working fine (but not sure, if they are using my routers localization or my GPS), running out of ideas how to set it up
Might be totally ridiculous, but do you have Location enabled? Check under Settings. Forgive me if you already have that enabled.
Sent from my HTC Sensation using xda app-developers app
emperorsuresh said:
Might be totally ridiculous, but do you have Location enabled? Check under Settings. Forgive me if you already have that enabled.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Hi, thanks for your reply, yeah, location is on , im switching between 'device only' and 'hight accuracy' but since i dont have wifi connection (except home which doesnt make much usage for GPS,unless testing) neither internet plan my (data connection is off) i don't think it makes any difference.
Lads, i still didnt figure out how to fix it, did you experienced similar problems with your devices ? how can i check to be sure that my GPS is def. working ? (it worried me, that while using GPS status i didnt see any satellites and couldn't get my geo. position )
Lads,
Almost 1,3k views and no advice
Please help me
Did you try another ROm like UniRom??? or the new Carbon ROM...
It will be better i think
why don't you download an app from google play sensor tester and see if your gps is working okey? maybe you have hw problem :/
Hi,
Thanks for your advice.
I had it already, as well i downloaded GPS Status (seems to be a bit better than sensor tester). I went out today and GPS Status caught 5 satellites, but couldn't determine my position , after that i've switched to g.maps and after a while, my position on the map was ... my home's address (that's were i used internet for the last time) - two streets from where I was standing, so after that I've switched again to GPS Status and within next 15 minutes couldn't catch any satellites. Have no idea how to fix it....
Hi lads,
So...i fixed it
I'm kinda ashamed after posting so much stuff earlier on, as the problem was with the hardware (had nothing to do with ROM/Kernel/RIL whatsoever), i only realized today (mostly cause I wanted to 'boost' the antenna) but the pin connectors with antenna were bent...yeah....really....i just stuck a small piece of an aluminium foil.
Below is screenshot form GPS Status - form inside my gaff - phone is placed against the window.
Can somebody make unlock function of mi band in cm11? Any idea how is possible port this function to the OnePlus?
malamen123 said:
Can somebody make unlock function of mi band in cm11? Any idea how is possible port this function to the OnePlus?
Click to expand...
Click to collapse
I'm curious too. I currently own a MiBand and everything works fine.
I think we'll have to wait for Android L which supports Bluetooth LE unlocking.
Currently, it works with a Tasker profile, though it's often a bit slow and can take up to 5-10 minutes untill it realises that the Miband is there / not there. On the other hand, if it's security you're thinking about, it may be a solution.
Dima_2005 said:
I'm curious too. I currently own a MiBand and everything works fine.
I think we'll have to wait for Android L which supports Bluetooth LE unlocking.
Currently, it works with a Tasker profile, though it's often a bit slow and can take up to 5-10 minutes untill it realises that the Miband is there / not there. On the other hand, if it's security you're thinking about, it may be a solution.
Click to expand...
Click to collapse
can you link where u got the mi band from? and what price you paid?
I got mine from ibuygou and paid 30$ for it. Though there are other major Chinese sites that sell it (like Banggood, ...)
malamen123 said:
Can somebody make unlock function of mi band in cm11?
Click to expand...
Click to collapse
For now there's no solution for truly proximity-unlock as in MIUI.
But for other phones only near solution is Xposed-module No Lock Home (all other apps non-functional for reasons).
It will to enable secure lock-screen if no connection with bracelet e.g. you lost phone = distance over 10 meters.
When Mi Band connected in module settings once tap "plus" icon > Bluetooth (MAC address)
This will fill MAC-address in field below and auto-locking will work.
Experiment with other settings too and don't forget to donate to author of module.
Maybe sometime he will add unlocking based on signal strength from band as in MIUI: I posted feature-request.
Did no lock home work for you? I thought it didn't support bluetooth le?
Currently i'm using tasker profile but it's sloooooow
Will this work if we use MIUI ROM?
Dima_2005 said:
Did no lock home work for you? I thought it didn't support bluetooth le?
Currently i'm using tasker profile but it's sloooooow
Click to expand...
Click to collapse
Just Wondering if this will work if we use the MIUI rom for oneplus?
I havent got mine yet. Waiting for it to arrive.
On cm12 (android 5.0), smart lock with miband actually works!
works on OnePlus CM11s
malamen123 said:
Can somebody make unlock function of mi band in cm11? Any idea how is possible port this function to the OnePlus?
Click to expand...
Click to collapse
I have tested the steps written here. it works
http://en.miui.com/thread-70696-1-1.html
Hello,
i just flashed and rootet my 2 years old tablet.
Here some facts from the tab:
Phone model: GT-P5100
Android system: 4.4.4
Kernel version: 3.0.31-CM-gaf80b62
ROM: samsung/espresso10rfxx/espresso10rf:4.2.2/JDQ39/P5100XXDNA1:user/release-keys
I use this tab for calling with a bluetooth headset.
When i flashed my tab, there happend weird things.
Normally everything works well, when i use the headset, but when i call some special contacts, then even the call tone starts to make sound like "krrrrrr" and "bruum".
Then if i start the call the voices are very weird and just scratch, you cant understand a word. If i stop the call, my phone app normally crash and i cant call again and i must restart the tab.
Its crazy, because it works with 3, 4 calls perfect, but if i call somebody with the same provider (simyo), then the call crash.
What is also very weird: I sit near to my tab, and suddenly the headset starts to make noises and i hear a "piep". Then everything is quiet and the tablet shines. But there was no call and no action, which would explain this reaction.
WHATS WRONG HERE? Is there the NSA listening?
My question ist, do somebody know, why my tab is so weird with the call app?
If every call would be bad, then i could say its the Version oder the Cyanogenmod, but sometimes it works well, sometimes not.
Thank you
Sammy
Are you using the latest radio for your device?
The 4.2.2 had a new radio built into the OTA. Did you update to that version before rooting and flashing a custom ROM?
Sent from my Nexus 4 using XDA Premium HD app
I pushed some patches and posted a build on SlimKat thread, but no response from the user...
Send from OnePlus One using Tapatalk
Hi,
I have a strange issue that only seems to affect my Gear 2 - everything else on Lollipop seems OK.
I am running the leaked stock ROM N9005XXUGBNL8 - rooted. I have also loaded the latest Gear Manager - 2.2.14112899.
When I turn on the watch or Phone, the devices connect correctly, and everything seems to work well. My problem is when I move out of range. The watch shows that the Bluetooth disconnects, but the phone still thinks that it is connected. When i move back into range, the phone and watch remain disconnected unless I manually reconnect by turning the phones Bluetooth off and then on again.
I have reloaded both the phone and watch, but still have the same issue. Sine the Lollipop ROM has not yet been formally released, I cannot ask Samsung for help, so if anyone can suggest a solution, I would be very grateful.
Thanks in advance, Richard
Hello,
I have the same problem with note 3 lollipop and gear 2.
I hope there will be a fix when lollipop arrives officially.
Best regards
Sent from my SM-N9005 using XDA Free mobile app
Blainstorm said:
Hello,
I have the same problem with note 3 lollipop and gear 2.
I hope there will be a fix when lollipop arrives officially.
Best regards
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the reply - at least I am not alone in this and that I am not imagining he issue
I also similar issue. Sometimes it reconnects automatically and other times I should manually reconnect from the Gear Manager.
Lets wait for the final Lollipop release
I am also facing the same problem. I reloaded the gear application twice and also flashed the ROM again after factory resetting the Note 3 but no change. Hope will get the solution soon.
Facing similar problem. After latest update of Note4 (still 4.4.4) watches not reconnect and bluetooth switches off. To manually reconnect i need to press "connect" in watches AND in gear manager. If i just turn on bluetooth watches connects and instantly disconnects turning bluetooth off.
The Gear Manager today updated to 2.2.15011799.
I do not know if this has improved matters yet, but will post if it does.
Update,
Seems to disconnect OK, but will not reconnect automatically. I don't know what is wrong with Samsung, but this really hampers the use of the watch.
After the update today, it works perfectly now!
It seems, the gear manager was the bad guy!
Best regards
Sent from my SM-N9005 using XDA Free mobile app
Still does not really work for me. I need to toggle bluetooth on the phone after a disconnect, but not every time.
Next day the same problems. But the gear is now faster connecting and transferring data. Before the update the gear taken 20 or 30 seconds to sync the calendar app. Now it's open Instantly.
Sent from my SM-N9005 using XDA Free mobile app
RDHoworth said:
Still does not really work for me. I need to toggle bluetooth on the phone after a disconnect, but not every time.
Click to expand...
Click to collapse
Had the same problem as well but downloaded "bluetooth auto connect" from the Play Store https://play.google.com/store/apps/details?id=org.myklos.btautoconnect&hl=en and this seems to have resolved the bluetooth connectvity problem. My gear 2 connects everytime.
Good luck
---------- Post added at 04:05 PM ---------- Previous post was at 03:59 PM ----------
I recently updated Gear Manager on my Note 3 running the leaked Lollipop 5.0. ALthough my gear 2 and manager works I have noticied that the Gear (watch) Icon which normally appears on the top left of the screen is no longer there. The gear notification messgae is still there. Anybody with a similiar issue?
Same here.
Also tried the Bluetooth auto connect, but this does not seem to work. Can you share the settings you used?
Thanks
Sent from my iPad using Tapatalk
I have noticed some more detail:
When i go out of range, the watch disconnect but often, the phone still seems to think the watch is connected. However, when I check the phones bluetooth setting, the watch is connected, but the Phone Audio is disabled. Occasionally, only a reboot will cure this.
I have also spotted several other issues relating to Bluetooth and Lollipop on the XDA forums, such as intermittent connection to Car phone systems, which I have also noticed. I am beginning to suspect that the main problem here is with the Lollipop bluetooth rather than specifically with the Gear. The ensd result is the same - a system that does not work correctly that should be supported and fixed by Samsung.
I have just upgraded the room to the Polish ROM released yesterday and carried out a factory reset.
I still have the same issues. It seems fairly clear that the phone does not recognise that the phone goes out of range and so status connected.
Given Up
I have given up and reverted to the Stock KitKat ROM. Guess what? everything now works.
I don't think that Android 5 is ready yet - will now wait for 5.1
Search for S6 apps (it is on in xda-developers forum as well). There is a version of the Gear Manager that solves the reconnect issue. I tested it shortly and it works on official lollipop for Note3.
EDIT: After some reboots, recconects are not working properly again.
Any news on how to solve this guys? Same problem here...
Enviado de meu SM-N910F usando Tapatalk
Hello every body,
I've the same problem with my N9005 under Lollipop.
Problem with bluetooth reconnection of my Gear S.
And for me I've another problem, my phone reboot several time per day, maybe due of this problem.
Do you face this problem too?
Hi!
This is the problem with me too! Not reconnecting. Do you have any solutions?