Database Info

[Q] cwm with allwinner A13

hello,
I have got a cheap chinese tablet pc with the following features :
Model: MID-001
Brand: softwinners
CPU: sun5i
CPU Model: ARMv7 Processor (VFPv3, NEON)
CPU Freq: 60 - 1008 MHz
Screen Res: 800 x 432
GPU Vendor: ARM
GPU: Mail-400 MP
GPU ver.: OpenGL ES 2.0
Android Ver: 4.0.4
I installed Cwm following the method explained on this page : http://forum.xda-developers.com/showthread.php?t=1906177
Everything works fine, but I didn't success in starting CWM pressing the power button. It just works through novotool.
it is explained : " u can go to cwm by switch off the tab and then by pressing power button and volume up u can go to cwm"
but when I press power button and volume up, it does not work.
So, if someone have the same kind of tablet and tried, thank you to help me to find a way.

Hi,
I got two of these mid-001 tablets from ebay/china around the same time you posted this thread. they were christmas toys for the kids.
one of them has always played up a bit but i've never been able to find drivers or roms for them to be able to fix it.
i don't suppose you ever fixed this thing or if anyone has managed to get a custom recovery and a custom rom working
thanks
Paul

[Q] Voto V5 MTK65xx Android Flashen

Hello Community,
I have a Voto V5 MTK6582 with Aliyun OS.
Hardwaredata​​:
VOTO V5 youth version of the master switch to 1.3GHz frequency MTK MT6582 new quad-core processors , combined with 1G RAM +4 G ROM memory is still 5.0 inches IPS screen resolution down to 1280 * 720 , but the data show that youth version continuation of the arc glass design V5/X2 2.5D , and Corning gorilla glass. Owns 2,000,000 +800 megapixel dual camera, 2500 mA battery , equipped Ali phone system can support WCDMA + GSM dual sim dual standby.
I want you delete the Aliyun OS , but no USB Debugging Mode in ALiyun OS to connect with MTK Droid Tool. After some tests to connect with MTK Driver and SP FlashTool 5.x and preloader and recovery from this Post: http://forum.xda-developers.com/showthread.php?t=2658343 i can upload in the device. But now the Device does not start anymore Preloader Problem? I Press Powerbutton for some Second, a short Vibration and only Backlight come up.
Have they any new Idea or Files (Android_Scatter, Preloader, Recovery usw.) with this i can test more?
In hope Thank

No Solution ?
Hi There,
i found allready no Solution to flash this MTK6582 Device. Have anyone a Idea for me? :crying:

I found out is a MTK6582
The Hardware is not far from Zopo ZP820. I can flash the Rom`s from ZP820 an Sound, Loading LED ist running. But Display Black. And i think the Scatter File ist not 100 Percent ok for Voto V5 youth. Can anyone help me to flash ?

maybe i find here help . i need multilangual rom
romzj._com/rom/voto.htm

@helpme06
Did you find anything that helped you? I have nearly the same problem. I just got a VOTO V5 Youth Edition from a friend.
It has been flashed with a wrong ROM and now doesn't boot-up anymore.
I need a ROM for this device that I can flash with SP_Flashtools, as the Recovery, etc has also been gone.
I found a ROM that can be flashed via Stock Recovery at the YunOS BBS, but as mentioned, I have no working Stock Recovery at the moment.
Would be great if someone has a SPFT-flashable ROM for this. Thanks!

Help! reset ZJT-H1

Hi Guys,
I need a help How to hard reset my new Chinese Phone. ZJT-H1
It's a 1 GHz MTK 6820 processor with Android 4.0.5. More details
Model ZJT-H1
Android 4.0.5
Screen 3.5" Capacitive Touch Screen
CPU MTK 6820/1GHz
2G/GSM 900/1800 MHz
Extended Memory Support TF Card up to 32GB Max
Camera Dual Camera(Front 1.3MP/Rear 5MP with Flash Light, Support Video record)
And also how to updat to the officiel frimware
i need it because i have this prblem
Any help

First go to recovery by pressing Vol+ and power on.
Then you will see a Factory reset choose that and reboot.

Problem of firmware tablet ODYS IEOS QUAD

Hello need help about firmware of my tablet : ODYS IEOS QUAD
Réf PCB : 8B 94V-0 _ 1450KW _ V2.3
Cpu : ROCKCHIP RK3188-T
NAND : SKhynix H27UCG8T2BTR think = 8GB
RAM : leahkinn KPN055SS-ZBv1 think = 1GB
Graphic chipset : : ROCKCHIP RK618
I replace the tablet touch screen and suddenly the tablet won’t to boot
I fetch a lot for different firmware and think that is clone of chuwi v88hd 2nd generation
I flash with all details about loader 2.16 and last kernel ver 610 but always finich ok but I see only stable white screen and can’t do factory reset as talked in steps of flashing .
For info I disable the tablet touch screen and install without it but I have the same result .
Can anyone help me to find solution of my tablet , and thanks for help

RK 3188 T? Is it white? Then you need FW for IEOS Quad White Edition.
OMA has it:
http://crewrktablets.arctablet.com/?s=odys+ieos&submit=Suche
Strg+Ctrl "White"
Here's what the manufacturer provides:
http://www.axdia.de/web/scripts/dow...te/IEOS_QUAD_White_V1.0.1_Customer_Update.zip
If you can't flash via normal procedure, try RK_Batch-Tool:
http://crewrktablets.arctablet.com/?wpfb_dl=697
Please educate yourself in using the Batch Tool.

Need rom for Diva QC-803GN 8" QUAD CORE 3G

hello all
need rom for my brick
Diva QC-803GN 8" QUAD CORE 3G
quick specs
cpu : 1.3 GHz Quad-Core MT8382
ram : 1GB
rom : 8GB
3G and it was with android 5.1
it boot and stuck on loading.
i can go in recovery and fastboot but i can't do anything else.
i try factory reset. no luck.
I came here after I tried to replaces internal memory with usb storage.
in recovery mode i see at the top:
K706L1-V10JQXS8GF8GBG-WG03.WSVGA.125.QC-803GN

well it look like RoverPad Sky Q8 3G is same hardware.
firmware is working nice.
and now i have working tablet.
thanks all for help