problem arises after rooting - Samsung Galaxy Ace Plus S7500

My galaxy aceplus is rooted
Then i installed supersu software
And i boot it in CWM mode
Nowi have formated sysyem data cache
Now everytime i boot it,it dnt boot normally.
Vo system ke options wale menu pe chale ja rha hai
Par boot nhi ho rha
Kya karu

tushar_godhwani said:
My galaxy aceplus is rooted
Then i installed supersu software
And i boot it in CWM mode
Nowi have formated sysyem data cache
Now everytime i boot it,it dnt boot normally.
Vo system ke options wale menu pe chale ja rha hai
Par boot nhi ho rha
Kya karu
Click to expand...
Click to collapse
What did you thought before formatting system?
Now, flash Stock ROM through odin. or flash a custom ROM

I try
Sent from my A111 using XDA Free mobile app

Related

[Q] please HoW Can i boot into recovery in my LG E-738 mytouch

Please i installed MIUI V4 rom IN my LG e-739 mytouch,den i applied a font wen i clicked on restart ma fone couldnt booT nor recovery Mode cuming up,,
Av tried de down key button....please if anybody gott help shud render.
Try power button and volume up
jojoshua1 said:
Try power button and volume up
Click to expand...
Click to collapse
AV tried dat several times but revovery mode not still showing up.....
Is dey any oda way to boot into recovery????
Av tried almost all de method but none seems to be working,
Is dey any oda way to flash a rom into fone without booting into recovery???

bootloop cherry mobile flare j1

Guys help!
how to fix my cherry mobile flare j1 bootloop?
there is no installed recovery mode (CWM)
how to go to fastboot?
my phone is bootloop cause I edited build.prop then I reboot my phone and then it stock in bootlogo but I have a back up of my build.prop on my pc so I tried to push build.prop to sdcard/system/ but it shows error unauthorized how can I fix it?
adb devices
list of device attached
H698R1ZY5B110EFC unauthorized na ka lagay
pano yan ma authorized?
thanks. in advance >>....
There must be an stock recovery.
In this recovery you can wipe your data and the dalvik cache. Try this!!!
Sent from my GT-I9300 using Tapatalk
marczkie18 said:
Guys help!
how to fix my cherry mobile flare j1 bootloop?
there is no installed recovery mode (CWM)
how to go to fastboot?
thanks. in advance >>....
Click to expand...
Click to collapse
same here, bootloop din ako, tingin ko walang stock recovery naka install, hangang bootlogo lang, hinde na maka proceed sa recovery. Wish ko this year sana meron na mag up ng stockrom flashable via PC> pleaseeeeeeeeeeeeeee.. Ssalamat
Install adb in pc than conect yor phone and type "adb reboot bootlodr" and flash recovery
Sent from my Nexus One using XDA Free mobile app
YannikM said:
There must be an stock recovery.
In this recovery you can wipe your data and the dalvik cache. Try this!!!
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I can't do that cause my stock recovery is Chinese language I can't read it
but thanks..
ianroy said:
same here, bootloop din ako, tingin ko walang stock recovery naka install, hangang bootlogo lang, hinde na maka proceed sa recovery. Wish ko this year sana meron na mag up ng stockrom flashable via PC> pleaseeeeeeeeeeeeeee.. Ssalamat
Click to expand...
Click to collapse
meron stock recovery men kaso Chinese o Japanese ata language....hold for 10 second volume up+power button to go to Chinese recovery
bablu147 said:
Install adb in pc than conect yor phone and type "adb reboot bootlodr" and flash recovery
Sent from my Nexus One using XDA Free mobile app
Click to expand...
Click to collapse
I tried what you said man but it shows error like this......... but thanks..
error:device unauthorized
Google how to geht into fastboot/download mode without a PC.
Then you can flash a custom recovery like twrp, philz, or cwm.
Sent from my GT-I9300 using Tapatalk
Try quick boot app for going in to fastboot without pc
Sent from my Nexus One using XDA Free mobile app
Hello, meron po akong CM Flare J1 na na-softbrick, I fixed it using a .pac file since di ko siya naayos sa recovery (chinese). Sinundan ko lahat ng instruction na nakita ko sa pag flash using .pac file. At sabi sa last part nung instruction, sa first boot xxxMB yung storage, iformat ko lang daw yung phone using the default recovery which is in chinese. Tapos babalik na sa default size, kaso ang problema ko po 256MB pa din ang internal memory niya. Di ba nasa 1.95GB or so yung internal memory? May alam po ba kayong paraan para maayos 'to?
join kau dito, be xur mgpakabait lng kau. dahil pag pasaway, at makulit, kicked agad.
marczkie18 said:
Guys help!
how to fix my cherry mobile flare j1 bootloop?
there is no installed recovery mode (CWM)
how to go to fastboot?
my phone is bootloop cause I edited build.prop then I reboot my phone and then it stock in bootlogo but I have a back up of my build.prop on my pc so I tried to push build.prop to sdcard/system/ but it shows error unauthorized how can I fix it?
adb devices
list of device attached
H698R1ZY5B110EFC unauthorized na ka lagay
pano yan ma authorized?
thanks. in advance >>....
Click to expand...
Click to collapse
chrisody said:
Click to expand...
Click to collapse
hayahayyyyyy!!! na-fix ko na yung touch problem sa v3.0 after flashing.. tested on v2 pac rom and now testing to flash v4 rom..
pm me on my facebook account,, [email protected]
bootloop
ako din po na bootloop pag click ko po sa erase all (except sd card and boot) tapos reboot bigla na lng po pumunta sa flarej1 logo ayaw po maalis doon kahit po pag pinipindot ng 10 sec yung power botton dun parin po yung punta kahit po lowbat pag charge dun parin po ayaw ma alis dun sa flarej1 logo :crying:

[Completed] Bootloop Cherry Mobile Flare j1

hi guys i have cherry mobile flare j1
na bootloop po ako hindi po maka punta sa recovery mode kasi stucked po siya sa boot logo "FLARE J1" .
Meron po akong backup ng system at custom recovery.
Kung may fix po kayung alam paki sabi na lang po asap please
successfully, I got in recovery mode(custom) flashed a system backup but it doesnt work. Can you tell what is the problem? i made fastboot erase userdata then fastboot erase cache before it stucked. Maybe backing up data and cache? or factory reset?
SourScream17 said:
successfully, I got in recovery mode(custom) flashed a system backup but it doesnt work. Can you tell what is the problem? i made fastboot erase userdata then fastboot erase cache before it stucked. Maybe backing up data and cache? or factory reset?
Click to expand...
Click to collapse
Hi and welcome to XDA.
There's no dedicated forum for your device here in XDA.
I found this thread that might help
bootloop cherry mobile flare j1
Or you can try posting your query in General discussion Questions and Answers Experts there may be able to help you.
Good luck

Cherry mobile flare x v2 soft brick?

Helow po, may flare x v2 po ako, nagkamali ako ng flash ng recovery.img,ang nangyare nagboot loop ung phone, tapos sinubukan ko ung recovery mode ung up+power butoon, ang lumabas eh black screeen na may tatlong pagpipilian
1.recovery mode
2.fastboot mode
3. normal boot
kahit ano piliin ko, nagbubootloop pa rin sya. pano po kaya ayusin?
Pareho tayo..still waiting SA symbianize

can't get into recovery mode in mmx A106

Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Okay so you are unable to boot your device in recovery mode. You can download stock recovery or any custom recovery for your device and then again flash it using flashify. Hope it will work. If its not working let me know by replying. :good:
Flashify is unable to flash stock n custom recovery in my mmx a106. I tried it but i got same issue as amlesh
Whats you need to do is to install sp flash tool on your pc and the stock rom for your mmx unite 2 lollipop .then install sp flash tool and and execute the program ...then there will be a command 'Scatter file' ....click on that and open that in fhe Firmware folder of your Stock Rom ....the connect ur device using usb cable and then click download in the sp flash tool......after completing that disconnect ur devices and reboot it....
Wrong Choice!
Flashify and Twrp are both bad for Unite 2!
You would have flashed the Philz Recovery with SP FLash tool and then flashed the TWRP recovery using it!
Now Still you can do the same
Just google philz recovery and you will get a detailed answer there!
If you like this hit THANKS
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Your phone appears to have gone into a bootloop.
Here is what you can do as you can't get into the system and reboot into recovery mode. Just confirm if you are doing it the correct way.
To enter Recovery mode - turn phone completely OFF.
Recovery = Vol Down + Power (hold both down for several seconds)
This button press procedure varies with each device/model of phone.
Click to expand...
Click to collapse
If the above steps failed, proceed down below.
Things you will need:
1) USB to PC connecting cable
2) A PC where you can download one of the tools to recover (MTKDroid/SpFlash along with the device specific Scatter file)
3) USB drivers installed on your PC to connect with your phone
4) Patience to read references and follow the steps to flash recovery using Tool
CAUTION: Do steps at your own risk. Do not hesitate to ask if not sure. Post restoring recovery successfully, if you plan to flash a Custom ROM, suggest taking a backup from device using TWRP OR atleast the NVRAM using MTKDroid Tool so that you do not run into issues resulting with SIM showing No Network/Service.
Click to expand...
Click to collapse
References: (Some of the community folks have done the hard work to publish these)
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
Installing custom recovery using SP Flash Tool(COMPLETE TUTORIAL)
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
https://forum.xda-developers.com/showthread.php?t=2730031
[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Ensure to have the latest versions of TWRP and the flash tools MTKDroid AND/OR SPFlash.
To let you know, I've used the recoveries viz. CTR, TWRP, CWM, Philz on MMX a106 and haven't experienced any issues at all. Neither have I had any issues with Flashify as reported by some. Anyways its a personal experience
NOTE: If the issue is already resolved by now, please help others know it with your fix.
Click to expand...
Click to collapse
Hope this helps, happy restoring
Finally, Thank if you feel helped.

Categories

Resources