Unbrand and update 3UK S4 on 1.06 hboot - HTC One S

Hello, I could use a little help, as I cannot flash recovery on branded 3-Mobile UK phone (S4 processor).
I have unlocked the bootloader via htcdev.
More phone info via fastboot getvar all :
Code:
version: 0.5
version-bootloader: 1.06.0000
version-baseband: 0.15.31501S.19_2
version-cpld: None
version-microp: None
version-main: 1.53.771.4
serialno: HT242W411761
imei: ***
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: H3G__001
battery-status: good
battery-voltage: 4018mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 802fa374
hbootpreupdate: 11
gencheckpt: 0
CID is H3G__001 and HBOOT is 1.06.0000
I have tried flashing both CWM and TWRP from fastboot, but though it seems everything goes well, when I reboot to recovery, it gives me the generic HTC recovery screen (the one with the little bar on the top right of the screen) and reboots after a while to the branded ROM. I think it reflashes the branded recovery automatically, because the bar is proceeding and then reboots the phone.
I cannot root or change CID without custom recovery.
Do I need to flash a boot.img (and which one)?
Thank you in advance!
*UPDATE*
OK, I managed to install an older version of TWRP (2.6.3.0).
What must I do to update hboot and install newer ROMS?

Candlemass said:
Hello, I could use a little help, as I cannot flash recovery on branded 3-Mobile UK phone (S4 processor).
I have unlocked the bootloader via htcdev.
More phone info via fastboot getvar all :
Code:
version: 0.5
version-bootloader: 1.06.0000
version-baseband: 0.15.31501S.19_2
version-cpld: None
version-microp: None
version-main: 1.53.771.4
serialno: HT242W411761
imei: ***
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: H3G__001
battery-status: good
battery-voltage: 4018mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 802fa374
hbootpreupdate: 11
gencheckpt: 0
CID is H3G__001 and HBOOT is 1.06.0000
I have tried flashing both CWM and TWRP from fastboot, but though it seems everything goes well, when I reboot to recovery, it gives me the generic HTC recovery screen (the one with the little bar on the top right of the screen) and reboots after a while to the branded ROM. I think it reflashes the branded recovery automatically, because the bar is proceeding and then reboots the phone.
I cannot root or change CID without custom recovery.
Do I need to flash a boot.img (and which one)?
Thank you in advance!
*UPDATE*
OK, I managed to install an older version of TWRP (2.6.3.0).
What must I do to update hboot and install newer ROMS?
Click to expand...
Click to collapse
your phone's security is on. I would recommend do the following:
1) S-off ur phone
2) change CID to supercid
3) Run any new RUU
4) Re-flash TWRP
5) Enjoy

bilal_liberty said:
your phone's security is on. I would recommend do the following:
1) S-off ur phone
2) change CID to supercid
3) Run any new RUU
4) Re-flash TWRP
5) Enjoy
Click to expand...
Click to collapse
Thank you for your answer and congrats on your ROM (it is the one I'm running right now ).
I managed to solve the issues yesterday, but the information was so scattered around, it took me half a day (along with the sloooow downloads).
For anyone interested, the procedure was like this :
1) Unlock bootloader via htcdev.com and identifier token
2) Flash TWRP 2.6.3.0
3) Root
4) SuperCID
5) S-OFF
6) Change CID to HTC__001
7) Update HBOOT to 2.15 via firmware flash
8) Run newest RUU
9) Flash newest radio
10) Re-flash TWRP
11) Flash Custom ROM
Step 8 can be skipped, but I wanted to see if it ran the stock ROM ok.
In more detail, with links and files :
Initially the phone was branded on 3UK with CID H3G__001, HBOOT 1.06 and MID PJ4010000.
Code:
version: 0.5
version-bootloader: 1.06.0000
version-baseband: 0.15.31501S.19_2
version-cpld: None
version-microp: None
version-main: 1.53.771.4
serialno: HT242W411761
imei: ***
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: H3G__001
battery-status: good
battery-voltage: 4018mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 802fa374
hbootpreupdate: 11
gencheckpt: 0
The safest way to update my HBOOT to 2.15 or 2.16 was via a latest official RUU from here http://www.androidruu.com/?developer=Ville . But the latest RUU matching my CID was a bit old (RUU_Ville_U_H3G_UK_1.78.771.5_Radio_0.16.31501S.19_2_10.23.31501S.10L_release_258982_signed) and I didn't know which HBOOT it contained, so I decided to update using the latest European RUU (RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4). In order to do this, I would have to chance CID to something corresponding (i.e. HTC__001 or HTC__N34 for my region - ELL).
(1)
I began with the thread [Tutorial]Root, Unlock, Recovery and flashing a Custom ROM, but got stuck on the recovery flashing, that's when I started this thread. I flashed the latest TWRP (2.7.0.0) and latest CWM (6.0.4.8) but they didn't work.
The recovery boot acted as described in the OP (gave me the generic HTC recovery screen) and tried multiple times. Then I remembered reading something like that the newest recoveries work differently to support newest hboot, so I tried the previous version (TWRP 2.6.3.0 from http://techerrata.com/browse/twrp2/ville ) and it worked.
(2-3)
TWRP also offered to root the ROM by installing supersu automatically, so I didn't have to flash it myself. After the reboot to system, I installed supersu from market, updated su binary and the root access was complete. The rooting was necessary so that we can change the CID to SuperCID.
(4)
SuperCID can be set following this guide [UNLOCK] AT&T Bootloader Unlock Through HTC-Dev. I changed H3G__001 to 11111111 with HxD (needs care not to change more that those 8 bytes and check that the size remains the same - mine was 1024B).
(5)
Next stop is S-OFF via Facepalm with the help of this thread [S-Off] Facepalm S-Off for HTC Devices One S, One XL, Droid DNA. It worked right away, following exactly the procedure as described.
(6)
I changed CID to HTC__001 , not leaving SuperCID on, because there were reports of bricks when flashing OTA updates. Just wanted to be on the safe side.
Easy from fastboot with S-OFF :
Code:
fastboot oem writecid HTC__001
(7-8)
The next step was to flash the latest RUU (RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4), in order to update my HBOOT to 2.15. But this came to a halt, as the RUU didn't proceed, giving me error 159. More info and solution on this matter can be found in the thread RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1. 11.50.05.28_10.27.50.08L_release.
In short, the problem is that the ROM.zip inside the RUU is encrypted and we either had to decrypt it using ruuveal via linux, or to use the already decrypted by hasoon2000 zip ( http://forum.xda-developers.com/showpost.php?p=40925380&postcount=79 ).
As I also mentioned in that said thread ( http://forum.xda-developers.com/showpost.php?p=52852710&postcount=123 ), if you update the HBOOT manually, by flashing corresponding firmware, the RUU flashing proceeds without any issues.
So, I followed the thread [GUIDE][TOOL]FUU/FirmwareHTC One S and flashed the Official Unbranded 2.15 Firmware (Sense) zip via fastboot. The result was an updated HBOOT to 2.15 and the ability to flash the official RUU. With S-OFF there is no need to relock the bootloader.
(9-10-11)
After that, I simply reflashed TWRP and the custom ROM Liberty-S4-V7a. I skipped the manual radio flash, because Liberty ROM had the option to flash it from AROMA installer automatically. For other ROMs, it is a simple flash via fastboot.
Simple, hah

Related

[Q] Need Help - Stuck at Hboot

Hi Guys, need your help on this.
I was using Fall Out Custom Rom. and then I want to restore back to my stock with S-ON of course. but after I run RUU, I've got bootloader version error, and right now just stuck in HBOOT/Fastboot. I cannot access ADB. I'm trying to find latest RUU, but there is no version higher than mine.
My Fastboot getvar all :
INFOversion: 0.5
INFOversion-bootloader: 0.98.0002
INFOversion-baseband: 3805.06.02.03_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.04.401.1
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4193mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 0e35ea5b
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
Are you able to help?
Thanks.
Remove your serial and IMEI from the post...
suku_patel_22 said:
Remove your serial and IMEI from the post...
Click to expand...
Click to collapse
Ok. Can help with my question?
Use Gold Card - Not working
I manage using gold card and flash ruu 2.10 but still not working cause my main version is > 3. Anybody can help? please....
try reading this thread
http://forum.xda-developers.com/showthread.php?t=1728513
some ideas you can try
You forgot to downgrade misc_version before restoring to stock.
Now, you have one of 2 options:
1) If your HBOOT is modified - you can fastboot flash recovery, connect by ADB, execute misc_version script in recovery (that step saves you ROM installation) to downgrade main version, and then execute RUU again.
2) If your HBOOT is stock and you can't do anything - you'll have to unlock it the HTC way, after unlock - execute all the above (including relocking the bootloader after main version is downgraded).
Jack_R1 said:
You forgot to downgrade misc_version before restoring to stock.
Now, you have one of 2 options:
1) If your HBOOT is modified - you can fastboot flash recovery, connect by ADB, execute misc_version script in recovery (that step saves you ROM installation) to downgrade main version, and then execute RUU again.
2) If your HBOOT is stock and you can't do anything - you'll have to unlock it the HTC way, after unlock - execute all the above (including relocking the bootloader after main version is downgraded).
Click to expand...
Click to collapse
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully.
Thank you very much.
hansgregory said:
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully. can i please have a link 2 the latest version 2 please please
Thank you very much.
Click to expand...
Click to collapse
i'm stuck on htc screen laptop wont identify usb would it be possible to get some idea of how you solved this problem please i would love to know cuz i'm in the same situation my gold card wont work i keep getting error main version is older or something like that please please any help would be very helpful my details below and i also have unlocked bootloader i also cant go into recovery it jus keeps booting to bootloader or the htc screen
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4023mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
kisame d shark said:
i'm stuck on htc screen laptop wont identify usb would it be possible to get some idea of how you solved this problem please i would love to know cuz i'm in the same situation my gold card wont work i keep getting error main version is older or something like that please please any help would be very helpful my details below and i also have unlocked bootloader i also cant go into recovery it jus keeps booting to bootloader or the htc screen
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4023mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
Click to expand...
Click to collapse
Since your hboot already using 2+, you can do following steps:
1. unlock your bootloader using htc dev
2. after unlocked, install recovery
3. go to recovery you've previous installed then connect usb and change misc version via adb
4. relock again the bootloader
5. then you can install the RUU
Hope this help.
unlock bootloader
hansgregory said:
Since your hboot already using 2+, you can do following steps:
1. unlock your bootloader using htc dev
2. after unlocked, install recovery
3. go to recovery you've previous installed then connect usb and change misc version via adb
4. relock again the bootloader
5. then you can install the RUU
Hope this help.
Click to expand...
Click to collapse
i have already unlocked my bootloader but every time i try to change my misc version my usb can't be recognized and i cant install any recovery to my device for some reason it keeps saying image fail or it flashes the image then i try to enter recovery mode then it just boots up to the htc logo and don't go into recovery
hansgregory said:
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully.
Thank you very much.
Click to expand...
Click to collapse
Hey hansgregory, I got the same problem you had. Would u kindly tell me where to find that firmware?? my phone is dead atm
Thank you,
ahmedsalahais said:
Hey hansgregory, I got the same problem you had. Would u kindly tell me where to find that firmware?? my phone is dead atm
Thank you,
Click to expand...
Click to collapse
Snap. I'm in exactly the same boat
I downloaded it from here :
http://forumt.xda-developers.com/showthread.php?t=1722571
extract the zip and get the firmware.zip
hansgregory said:
I downloaded it from here :
http://forumt.xda-developers.com/showthread.php?t=1722571
extract the zip and get the firmware.zip
Click to expand...
Click to collapse
Link does not work
EDIT - Manager to open the thread by right click (Copy link address) and paste into google, The link is for the Chinese OTA, Can you confirm that this works OK and is all in English
Thanks
dannyhoughton74 said:
Link does not work
EDIT - Manager to open the thread by right click (Copy link address) and paste into google, The link is for the Chinese OTA, Can you confirm that this works OK and is all in English
Thanks
Click to expand...
Click to collapse
It doesn't. At least in my case.
I had to add my cid to make it loadable but that's about it:
Loading .. [PG88IMG.zip]
Checking .. [PG88IMG.zip]
Then it returns to Fastboot menu again with nothing changed!
ahmedsalahais said:
It doesn't. At least in my case.
I had to add my cid to make it loadable but that's about it:
Loading .. [PG88IMG.zip]
Checking .. [PG88IMG.zip]
Then it returns to Fastboot menu again with nothing changed!
Click to expand...
Click to collapse
Hi Ahmed,
What is the version of your hboot? is it already 2.00+? if it is you can just unlock via htc dev to flash the recovery. No need to flash the firmware
kisame d shark said:
i have already unlocked my bootloader but every time i try to change my misc version my usb can't be recognized and i cant install any recovery to my device for some reason it keeps saying image fail or it flashes the image then i try to enter recovery mode then it just boots up to the htc logo and don't go into recovery
Click to expand...
Click to collapse
IMO is that you dont need to flash the firmware, since you already said that you've already unlock the bootloader. I did flash the firmware because i want to unlock my bootloader.
I download this recovery image www.4ext.net/ddl/saga/recovery.zip, I flash this image in fastboot and the recovery installed successfully, maybe you can try it also.
after that you can install tacoroot for temporary root and misc version your device image version, then you can install ruu afterward.
hansgregory said:
Hi Ahmed,
What is the version of your hboot? is it already 2.00+? if it is you can just unlock via htc dev to flash the recovery. No need to flash the firmware
Click to expand...
Click to collapse
My problem is complex. Hboot is 0.98.0002 so i can't use HTCDev to unlock. At the same time adb is not working so i can't s-off. RUUs of 2.x or 1.x do not work either as latest image was 3.x .
I think i need to upgrade Hboot (somehow) to enable HTCdev Unlock then downgrade and s-off. That may require RUU > 3.x ... and it must be RUU not OTA or update package.
My case was the same as yours thats why i flash the firmware so i can unlock my bootloader. But you are not able to flash from chinese ota i gave you earlier?
Sent from my HTC Desire S using xda app-developers app
hansgregory said:
My case was the same as yours thats why i flash the firmware so i can unlock my bootloader. But you are not able to flash from chinese ota i gave you earlier?
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
At first i wasn't able to. Then i edited android-info.txt inside firmware.zip to fake it to support middle east. But it just load and check without asking for apply!

[Q] Black screen and reboot to recovery after HTC logo

Hello,
I am trying to help a friend with his Desire S and we have managed to Developer unlock the phone and install TWRP on it. However no matter which ROM we try after flashing and rebooting it just goes black (though with backlight on) after a short while the phone reboots and goes back into Recovery.
The phone is as said Unlocked, though with S-ON. Running HBOOT 2.00.002:
Code:
version: 0.5
version-bootloader: 2.00.0002
version-baseband: 3822.10.08.04_M
version-cpld: None
version-microp: None
version-main: 13.10.401.8
serialno: xxxx
imei: xxxx
product: saga
platform: HBOOT-7230
modelid: PG8810000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4122mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: ebd3df7d
hbootpreupdate: 12
gencheckpt: 0
Is there any way to get this device up and running again somehow?
Ah I found out. Unlike most other devices I have tried, the kernel needs to be flash manually each time and is resided in the root of the ROM usually, and can be flashed by:
First flash the ROM
Reboot into Bootloader (fastboot usb)
Extract the boot.img from the ROM zip
Issue the command: fastboot flash boot boot.img
Some ROMs require addons such as gapps being applied at this step
I think this should be more explicitly outlined in every ROM install details as it is not very clear for someone used to having the kernel flashed automagically through the recovery.
Cheesebaron said:
Ah I found out. Unlike most other devices I have tried, the kernel needs to be flash manually each time and is resided in the root of the ROM usually, and can be flashed by:
First flash the ROM
Reboot into Bootloader (fastboot usb)
Extract the boot.img from the ROM zip
Issue the command: fastboot flash boot boot.img
Some ROMs require addons such as gapps being applied at this step
I think this should be more explicitly outlined in every ROM install details as it is not very clear for someone used to having the kernel flashed automagically through the recovery.
Click to expand...
Click to collapse
Lol yh, i agree. Before i downgraded n went s-off, i flashed 2 roms and they didnt boot and the OP said nothing bout flashing boot.img after the rom. So u might look into going s-ff, u dont need to flash boot.img after flashing the rom.

[Q] upgrade from rooted stock ICS to stock JB: ERROR 132

I need help to upgrade my HTC One S (C4) (Ville U) rooted from stock ICS (rom version 2.31.401.5) to the new JB.
There are several things I don't understand, so, please, help me.
Some info:
Code:
HTC Ville U no brand (got from H3G Italy)
Tampered
Unlocked
Vle pvt ship s-on
Hboot 1.14.0002
Radio 1.06es.50.02.31
Cid HTC_405 (italy, no brand)
Mainsku 401
Rom: Ville_u_isc_40_s version 2.31.401.5
version: 0.5
[email protected] bootloader : 1.14.0002
[email protected] baseband : 1.06es.50.02.3
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: ***************
imei: ***************
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: HTC__405
battery-status: good
battery-voltage: 3950mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
[email protected] bootloader : 1a7fdca3
hbootpreupdate: 11
gencheckpt: 0
I have reverted to stock recovery (but in bootloader I see always "tampered"). Then I relocked. Then I tryed to flash the ruu RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
But after a while I get ERROR 132 (signature error).
I tryed to start the ruu after manually entering in fastboot mode, but I get the same error.
The phone was factory reset, but apps like SuperSu are always present as they were flashed in system.
What should I do now?
You just need stock recovery to flash OTA
Search for how to reinstall stock recovery
From HTC One S
Just flashed stock recovery and relocked bootloader.
I started the RUU named RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe from Windows 7 32 bit (antivirus and any protection disabled) but after the initial screen, the software closes.
So I restarted the RUU from fastboot, the ruu start the update but stops again with this error:
ERROR [132] SIGNATURE ERROR (don't know if in english is "SIGNATURE", I got the message in Italian, that is "ERRORE FIRMA".
How to proceed?
Did you disable 'fastboot' in settings of your phone?
Else I don't see a reason why it shouldn't work. You could change CID to HTC__001, also HTC_405 should be good for an EU branded RUU.
Btw, the tampered flag can only be removed when your phone is s-off.
The phone is always in usb debug mode. I neve tried the ruu with debug mode off. Now I will try to reinstall the same ruu of ICS that I have on the phone. Just to make a try
EDIT:
well, the ruu of ICS was succesfully installed. Then I run ruu of JB but I got another time the error 132.
Now I'm trying the OTA. Is it a risk?
EDIT2:
Done: I made the OTA and all works perfectly. Now I have JB.

Please help with my htc desire s trying to fix it :(

hello i have a htc desire s phone working great was rooted with HTCDEV with s-off i ran a ruu on it with the s-off and now its bricked wont go any far than bootloader its got s-on now also tried a few t-mobile ruu but none work and wont boot into recovery either.phone working great was rooted with HTCDEV with s-off i ran a ruu on it with the s-off and now its bricked wont go any far than bootloader its got s-on now also tried a few t-mobile ruu but none work and wont boot into recovery either.i get this when i try to unlock boot loader again.worked before.i also changed the splash.img but screwed it up pic not right.the screen before the animation i am on about it was a picture of t-mobile thats how this all came along wanted to get rid of that just wanted the htc one.thats why i tried flashing a ruu keep getting errors when i do but there are the same t-mobile ruu.i can post it to you im sure be easy enough to fix with the right ruu but i cant find one online the ones i try dont work.
hello i have made a goldcard put it in my phone and ran the
===========================================
(1)
RUU_Saga_TMO_UK_1.30.110.2_R_Radio_20.28b.30.0805U _38.03.02.11_M_release_180106_signed
ERROR (140) BOOTLOADER VERSION ERROR
the rom update utility cannit update your andriod phone
please get the correct rom update utility and try again
================================================== ===========
(2)
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085 AU_3805.06.02.03_M_release_199410_signed
ERROR (131) BOOTLOADER VERSION ERROR
the rom update utility cannit update your andriod phone
please get the correct rom update utility a
================================================== ===========
my phone is s-on
C:\Android\tools>fastboot getvar all
version: 0.5
version-bootloader: 0.98.0000
version-baseband: 38.03.02.11_M
version-cpld: None
version-microp: None
version-main: 2.10.110.8
serialno:
imei:
product: saga
platform: HBOOT-7230
modelid: PG8810000
cidnum: T-MOB005
battery-status: good
battery-voltage: 4026mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 361a7ba6
hbootpreupdate: 12
i just cant think what im doing wrong with this phone

Cyanogenmod11 ruu

I made install cm11 a bit easier for yall.
https://drive.google.com/file/d/0B0x...it?usp=sharing
download this file.
extract rom.zip and put into same folder as fastboot
reboot phone into fastboot
then run command fastboot oem rebootRUU
when in ruu mode run command- fastboot flash zip rom.zip
note you must be s-off and using supercid.
it might say flush immediately blah blah just run fastboot flash zip rom.zip again and wait til it finishes
next fastboot reboot-bootloader
and then boot into recovery
press the wipe button and choose "format data" enter "yes" when prompted
then reboot recovery and choose "wipe" this time press "advanced wipe" only check "cache" when its done go back and now only check "dalvik-cache"
once thats complete reboot system and wallaa cm11
these are just the bootloader variables hboot is also modded for red text, and will also not show "tampered" or "security warning" etc.. also when you do fastboot oem lock it will say locked not relocked.
I tested it on my mini so it does work.
version: 0.5
version-bootloader: 2.21.0000
version-baseband: 1.24.40e.00.26
version-cpld: None
version-microp: None
version-main: Cyanogenmod11
version-misc: PVT SHIP S-OFF
serialno:
imei:
meid:
product: m4_ul
platform: HBOOT-8930
modelid: PO5822000
cidnum: 11111111
battery-status: good
battery-voltage: 4319mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
thanks to h8rift for the hard work on cm11
and to jmz for an official twrp recovery
also attached is stocksplash.zip..to apply use fastboot oem rebootRUU then fastboot flash zip stocksplash.zip then fastboot reboot..done.
Thx for the ROM, I can confirm it works.
Is it possible to post the original boot splash screen(in splash.img form) for stock restore? I can't find it anywhere.
Thx in advance.
Sorry, but what is this exactly?
Its basically just custom recovery hboot and ROM all in a flashable zip.
Sent from my One Mini using Tapatalk
Work with Hboot 2.22.0000!?
cmvienneau said:
Its basically just custom recovery hboot and ROM all in a flashable zip.
Sent from my One Mini using Tapatalk
Click to expand...
Click to collapse
Execute me. i'm new in HTC One mini and i'm poor in English.
this RUU worked with Hboot 2.22?
i have one is Hboot 2.22 S-ON if i apply this ROM it worked?
and another one is Hboot 2.19 S-OFF 4.2.2 rooted if i Update OAT can i keep ROOT after Updated?
Thanks.

Categories

Resources