Related
hk goooooooooooooooooooooooooooooooood
how did you get it on your device?
jtech said:
how did you get it on your device?
Click to expand...
Click to collapse
flashing...
can you tell us how please?
i thought it was not possible to downgrade?
sindrefyrn said:
You can flash an update with lower spl, but not with lower mainver, as here.
Click to expand...
Click to collapse
In order need to downgrade/upgrade to HK firmware?!
Is there any software for Android that can read and type chinese?
Thanks
Only a gold card we need, so you can flash any ROM you like~~
kevin612 said:
In order need to downgrade/upgrade to HK firmware?!
Is there any software for Android that can read and type chinese?
Thanks
Click to expand...
Click to collapse
Many Chinese Input APK e.g. Penpower, Q9, Baidu ...
kevin612 said:
In order need to downgrade/upgrade to HK firmware?!
Is there any software for Android that can read and type chinese?
Thanks
Click to expand...
Click to collapse
i can downgrade flash
Goldcard did not work so it would be nice if you detailed how you downgaded?
Thanks
jtech said:
Goldcard did not work so it would be nice if you detailed how you downgaded?
Thanks
Click to expand...
Click to collapse
you know ?
test phone can up and downgaded!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
senao01 said:
you know ?
test phone can up and downgaded!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I dont know if its me, but you seem to be a bit vague. How about you explain in detail what you are talking about?
ohh and
rEaLly!!!1!!1!!1!!! uz n00bs g0t n0 sk1llz!!1!!11
So far we know (or assume or you sort of let us know kinda)
1.) hk goooooooooooooooooooooooooooooooood
-The HK Firmware/Phone is good
2.) flashing...
-You were able to install the HK firmware
3.) i can downgrade flash
4.) test phone can up and downgaded!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!
-Its likley you have a test phone, thus you can flash any rom
5.) You own a bad camera or cannot take good photos
and this release has watermaks, so who wants a watermaked device?
thank you! i like it.
Is dangerous for my phone or it is easy? Theres a possibility to brick?
senao01 said:
hk goooooooooooooooooooooooooooooooood
Click to expand...
Click to collapse
You don't happen to still have the RUU?
Disclaimer: I am not responsible in any way if using my tool causes hard bricks,bootloops,alien abduction etc. By downloading and using this tool,you agree to this condition.
Hey guys!
It's been some time that I've been seeing people having problems flashing the 2nd Bootloader and TWRP recovery to the 2012 Kindle Fire HD 7". So,I decided to create this tool. May I present to you,
Flasher
By Anonymous.123
This is a batch file which can flash the 2nd Bootloader and TWRP recovery to the 2012 Kindle Fire HD 7",complete with ADB and Fast boot executables,stack override,disable auto-recovery update script as well as the 7.2.3 Bootloader downgrade to prevent red screens.
Screenshots:
Click to expand...
Click to collapse
Working features:
Device verification through fastboot.
Flashing Freedom boot and TWRP
Downgrading the Bootloader to 7.2.3
Stack override
Disabling auto-update recovery script
Reboot into TWRP(optional)
Backing up boot,recovery and system partitions.
Click to expand...
Click to collapse
Steps to use:
Download the zip and extract it.
Read the ReadMe.txt carefully.
Install the Kindle Fire ADB drivers(if needed)
Run Flasher.bat as Administrator.
Follow the on-screen instructions.
Click to expand...
Click to collapse
Changelog:
[01/02/2014]Initial Release
[19/02/2014]Fixed a bug in the backup script
Click to expand...
Click to collapse
Download link:
http://www.mediafire.com/download/m617ssdcfotl7rx/Flasher.rar
MD5 Checksum:E772115AFDE4E6A1EC812C45F60F76F9
Click to expand...
Click to collapse
Source:
https://github.com/Anonymous-123/Flasher.git
Click to expand...
Click to collapse
Credits go to Hashcode,seokhun,Prallday168,fattire,very green and anyone else whose work helped me.
Please hit the Thanks button if this tool helped you. Feel free to comment below to suggest any modifications,report any issues or for any help.
Thanks.
Anonymous.123 said:
Hey guys.
I made a small batch file that will flash the 2nd Bootloader and TWRP recovery to the 2012 Kindle Fire HD 7".
I also included adb and fastboot executables so that it can be used without Android SDK.
But I need someone to have a look at this thing to make sure that it works. I don't want to brick anyone's device.
Please PM me if you want to test it.
Thanks.
Click to expand...
Click to collapse
could help that is compatible with linux
viktormax3 said:
could help that is compatible with linux
Click to expand...
Click to collapse
I made it on Windows using Notepad++
Anonymous.123 said:
I made it on Windows using Notepad++
Click to expand...
Click to collapse
send it to me to test
viktormax3 said:
send it to me to test
Click to expand...
Click to collapse
Sent it.
Sent from my CM 11 Device
viktormax3 said:
send it to me to test
Click to expand...
Click to collapse
Did you get it?
Sent from my CM 11 Device
Anonymous.123 said:
Did you get it?
Sent from my CM 11 Device
Click to expand...
Click to collapse
I try and tell you, I just read the message
Everything installed well, what i did not try was the backup option because im not running stock.
I have tried(successfully)
Option 1
Option 3
Option 4
Awesome tool and im sure it has taken a while to do it! so you have a Go from me. maybe someone with stock can try Option 2, I was looking at the tool in notepad++ and all seems to be correct so i don't think there would be a problem doing the backup.! :good:
Prallday168 said:
Everything installed well, what i did not try was the backup option because im not running stock.
I have tried(successfully)
Option 1
Option 3
Option 4
Awesome tool and im sure it has taken a while to do it! so you have a Go from me. maybe someone with stock can try Option 2, I was looking at the tool in notepad++ and all seems to be correct so i don't think there would be a problem doing the backup.! :good:
Click to expand...
Click to collapse
Thanks!
Sent from my CM 11 Device
Anonymous.123 said:
Thanks!
Sent from my CM 11 Device
Click to expand...
Click to collapse
No problem!
bump
i stood in version 7.2.3. i want to upgrade to latest so i can have the new recovery so i can get cyanogenmod. how can i upgrade safely ?
persano said:
i stood in version 7.2.3. i want to upgrade to latest so i can have the new recovery so i can get cyanogenmod. how can i upgrade safely ?
Click to expand...
Click to collapse
I think it's possible to have TWRP 2.6.3.1 installed on 7.2.3 along with the 2nd Bootloader according to seokhun's thread.
Sent from my CM 11 Device
Anonymous.123 said:
I think it's possible to have TWRP 2.6.3.1 installed on 7.2.3 along with the 2nd Bootloader according to seokhun's thread.
Sent from my CM 11 Device
Click to expand...
Click to collapse
i m using fastboot to go to stock, after than i m going to update to the latest version and i m going to install twrp. i think is the most secure method, no ?
I just recieved a KFHD 7 that has a cracked screen and lcd, once I replace it ill do a full thorough test of all the options for you :good:
persano said:
i m using fastboot to go to stock, after than i m going to update to the latest version and i m going to install twrp. i think is the most secure method, no ?
Click to expand...
Click to collapse
Yep.
Updated!
Update ? What is new ? Thanks
Sent from my Kindle Fire HD 7 using Tapatalk
quan_1986 said:
Update ? What is new ? Thanks
Sent from my Kindle Fire HD 7 using Tapatalk
Click to expand...
Click to collapse
A bug in the backup option.
Sent from my CM 11 Device
backup option works just confirmed on 2 devices done by me! id say this works like a charm :good::highfive:
(On 4.4 rooted device?)
Solved.
As explained by the below users.
Thanks to all!:victory::laugh::highfive:
Download the .apk from Xposed website and install it. Done.
http://dl.xposed.info/latest.apk
Petrovski80 said:
Download the .apk from Xposed website and install it. Done.
http://dl.xposed.info/latest.apk
Click to expand...
Click to collapse
Please clarify....doesn't the phone need to be rooted?
wrj54 said:
Please clarify....doesn't the phone need to be rooted?
Click to expand...
Click to collapse
Yes.
Sent from my Nexus 10 using Tapatalk
wrj54 said:
Please clarify....doesn't the phone need to be rooted?
Click to expand...
Click to collapse
Yes it has tot be rooted. OP stated his phone already was though.
Sent from my XT1032 using Tapatalk
Petrovski80 said:
Yes it has tot be rooted. OP stated his phone already was though.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Just wishful thinking on my part. I want xposed but I don't wish to loose my warranty. I'll have to wait....
Petrovski80 said:
Download the .apk from Xposed website and install it. Done.
http://dl.xposed.info/latest.apk
Click to expand...
Click to collapse
Thanks! It worked
xposed is not working
when i downloaded the xposed file through your link and install..
in framwork here is a problem!!!!
here is written that ""<Xposed is not (yet) compatiable with android sdk version 22 or your processor architecture (armeabi v7a). CANNOT link executable dependencies : library " libdvm.so" not found>""
Hello my friends.Im a new member here and I would like to ask you if there is a way to root my kingzone ?If there is please can you tell me how or can you give a link ? Thanks a lot for yours understanding
Sent from my iPhone using Tapatalk
poseidvn said:
Hello my friends.Im a new member here and I would like to ask you if there is a way to root my kingzone ?If there is please can you tell me how or can you give a link ? Thanks a lot for yours understanding
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
try this video http://www.youtube.com/watch?v=WUfDkRVfUlU
Thanks a lot my friend for your answer.I will check it
Sent from my iPhone using Tapatalk
Ok I made it with eroot 1.3.4.Thanks again.
Root
3lo0sh said:
try this video http://www.youtube.com/watch?v=WUfDkRVfUlU
Click to expand...
Click to collapse
sorry I'm new to this stuff
after root can i install KK 4.4.4?? if yes is there any instruction how to install KK 4.4.4? what about all original apps came with the phone are they wipe out?
Thank you very much
eroot
poseidvn said:
Ok I made it with eroot 1.3.4.Thanks again.
Click to expand...
Click to collapse
how did you do that I installed eroot 1.3.4 on my computer but I don't read Chinese. with you help would be nice
thanks in advance
I'm at work now. I'll tell you later
Check out androidxda
poseidvn said:
Hello my friends.Im a new member here and I would like to ask you if there is a way to root my kingzone ?If there is please can you tell me how or can you give a link ? Thanks a lot for yours understanding
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Check out androidxda from Rajesh Patel 5 days ago
Good Luck
Lirff
root kingzone k1
poseidvn said:
I'm at work now. I'll tell you later
Click to expand...
Click to collapse
thank you very much
vylong said:
sorry I'm new to this stuff
after root can i install KK 4.4.4?? if yes is there any instruction how to install KK 4.4.4? what about all original apps came with the phone are they wipe out?
Thank you very much
Click to expand...
Click to collapse
no rom for your kingzone unless manufacture resale ota update so just wait and no they won't wipe out
kingzone k1
3lo0sh said:
no rom for your kingzone unless manufacture resale ota update so just wait and no they won't wipe out
Click to expand...
Click to collapse
OK
thank you
root
3lo0sh said:
no rom for your kingzone unless manufacture resale ota update so just wait and no they won't wipe out
Click to expand...
Click to collapse
after rooted can I install 4.3 jelly bean? if yes any instruction step by step how to?
thanks in advance
vylong said:
after rooted can I install 4.3 jelly bean? if yes any instruction step by step how to?
thanks in advance
Click to expand...
Click to collapse
I don't think so bcuz the root well gone
root
3lo0sh said:
I don't think so bcuz the root well gone
Click to expand...
Click to collapse
I thought root the device we can get the latest firmware update sooner rather then waiting for the release.
vylong said:
I thought root the device we can get the latest firmware update sooner rather then waiting for the release.
Click to expand...
Click to collapse
No
The root will give you full permission to editing system to add or remove features, install third party apps as system apps, remove unneeded system app ............ etc
Root meaning (plz enter url) : http://en.wikipedia.org/wiki/Rooting_(Android_OS)
root
3lo0sh said:
No
The root will give you full permission to editing system to add or remove features, install third party apps as system apps, remove unneeded system app ............ etc
Root meaning (plz enter url) : http://en.wikipedia.org/wiki/Rooting_(Android_OS)
Click to expand...
Click to collapse
thank you
vylong said:
thank you
Click to expand...
Click to collapse
no problem
Just checked out their official webpage, looks like they have an official 4.4 ROM out now for the K1 Turbo.
Gonna flash that guy tonight... or at least try to
Sorry for the DP, but thought I'd do an update and since it was months since my last post about this, thought might as well do a new post.
Updated to official 4.4 and I'm overall happy with it. I lost the ability to change the "window" wallpaper (when you have the QI charging case, the window will be locked to whatever wallpaper you set before updating) and battery seems to be about the same for me.
That being said, I noticed that there is a CM 12.1 (android 5.1.1 ROM) for this guy. Thinking I may need to install TWRP (or equivalent) and do a nandroid then toss on a bigger badder ROM like that. Generally not a huge fan of CM ROMs as I find I need to do a LOT of post-install tweaks to the init.d scripts and build.prop files, but to get an LP ROM onto this already sweet phone I think would be worth it.
Thoughts?
bmg002 said:
Just checked out their official webpage, looks like they have an official 4.4 ROM out now for the K1 Turbo.
Gonna flash that guy tonight... or at least try to
Click to expand...
Click to collapse
Hello everyone! I've changed some modifications in the installer script to make working CWM for LB.
CWM 6.0.4.6 for LOCKED BOOTLOADER (D2303 ONLY)I am not responsible for bricked devices or something like that. I've tried this more than 10 times and it's working fine.
Requirements:
PC
Rooted
LockedBootloader
USB Debugging ON
Drivers installed
How to install?
Extract the zip file
Open install.bat
Connect your phone
Follow the instructions
Wait until it is completed
Done
How do i enter cwm recovery?
Reboot your phone
When you see Cyan LED press Volume Down (-) and wait until the phone vibrate
Your phone should boot into recovery
Known bugs:
???
It's working on:
Every firmware!
Download links:
CWM
Credits:
lozohcum - helping me a lot. Thank you buddy. Also for using your recovery.
ndrancs - for helping me.
rachitrawat and [NUT] for using the installer script.
AleksJ for sharing us PhilZ recovery so i used the script from that recovery which allows you to mount system.
If I forgot someone sorry. Feel free to PM me, I'll change it.
And that's it. If i helped you hit the thanks button.
successful like the old days
Good work bro!!! I will try in some hours and report :good:
Bro please make script for disalble sony_ric.
Nicely done, good work.
waw
Can you make for this kernel
DanielFlorin said:
Bro please make script for disalble sony_ric.
Click to expand...
Click to collapse
And what do you mean by that? I mean what's your idea? You think maybe in that way we can flash without changing the kernels just with flashing that script?
i_1 said:
Can you make for this kernel
Click to expand...
Click to collapse
Wait, CWM works fine on D2403 ? You need flashable kernel?
ishakcez said:
successful like the old days
Click to expand...
Click to collapse
DanielFlorin said:
Good work bro!!!
Click to expand...
Click to collapse
Thank you
lozohcum said:
Nicely done, good work.
Click to expand...
Click to collapse
Thanks <3
thanks for your job.
All work perfect.
Lidane said:
thanks for your job.
All work perfect.
Click to expand...
Click to collapse
I'm glad to hear that.
Andrej732 said:
Wait, CWM works fine on D2403 ? You need flashable kernel?
yess bro
Click to expand...
Click to collapse
So we cant flash any roms that r 4.4.4 ? i got a bootloop when i tried and i did it correctly got something saying ter/recovery.log :/
Amazing, Good job mate...
Andrej732 said:
How to install?
Extract the zip file
Open install.bat
Connect your phone
Follow the instructions
Wait until it is completed
Done
How do i enter cwm recovery?
Reboot your phone
When you see Cyan LED press Volume Down (-) and wait until the phone vibrate
Your phone should boot into recovery
Click to expand...
Click to collapse
Bro i follow this instruction. But do not get into recovery. Help me.
i_1 said:
yess bro
Click to expand...
Click to collapse
Try this.
kevinkehoe18 said:
So we cant flash any roms that r 4.4.4 ? i got a bootloop when i tried and i did it correctly got something saying ter/recovery.log :/
Click to expand...
Click to collapse
You can only flash custom roms who have included stock boot.img untouched. For example you can't flash CyanogenMod because it requires different boot.img and since your bootloader is locked you can't change kernel who is different than stock. I've seen someone that installed CyanogenMod on locked bootloader running stock kernel, I don't know how to do it because I'm not dev.
ndrancs said:
Amazing, Good job mate...
Click to expand...
Click to collapse
Thank you for your help.
DanielFlorin said:
Bro i follow this instruction. But do not get into recovery. Help me.
Click to expand...
Click to collapse
Hmm, maybe some more information ? Also check if all files are in the place where they are supposed to be. Here list:
/system/xbin/busybox
/system/bin/recovery.tar
/system/bin/recovery.sh
and this's script type file /system/bin/e2fsck
On loched bootloader i try and no work bro..
Good news bro! Work in Unlock bootloader! With this kernel http://d-h.st/D1Bt
Please fix bugs.
Andrej732 said:
Try this.
You can only flash custom roms who have included stock boot.img untouched. For example you can't flash CyanogenMod because it requires different boot.img and since your bootloader is locked you can't change kernel who is different than stock. I've seen someone that installed CyanogenMod on locked bootloader running stock kernel, I don't know how to do it because I'm not dev.
Thank you for your help.
Hmm, maybe some more information ? Also check if all files are in the place where they are supposed to be. Here list:
/system/xbin/busybox
/system/bin/recovery.tar
/system/bin/recovery.sh
and this's script type file /system/bin/e2fsck
Click to expand...
Click to collapse
So what can we flash with our recovery now
DanielFlorin said:
On loched bootloader i try and no work bro..
Good news bro! Work in Unlock bootloader! With this kernel http://d-h.st/D1Bt
Please fix bugs.
Click to expand...
Click to collapse
Andrej732 said:
Requirements:
LockedBootloader
Click to expand...
Click to collapse
People confirm that works. I don't know what might be the problem for you. As i can see from your status your bootloader has been unlocked and you have already fully working cwm for that. And for the bugs I don't know I'm waiting someone who can help me.
kevinkehoe18 said:
So what can we flash with our recovery now
Click to expand...
Click to collapse
Well, I don't know scripts,mods, custom roms based on stock kernel if someone will make at the future. Also you can flash deodex firmware for 4.4.4 from Daniel Florin.
Recovery?
Hi dose this actually work on the latest firmware for out d2303? on a unlocked bootloader? because that would be awsome as I been waiting for some time for a CWM recovery for it.
HatchetEgg said:
Hi dose this actually work on the latest firmware for out d2303? on a unlocked bootloader? because that would be awsome as I been waiting for some time for a CWM recovery for it.
Click to expand...
Click to collapse
Yes. Nope it's for locked bootloader.
Andrej732 said:
Requirements:
LockedBootloader
Click to expand...
Click to collapse
It's working fine on D2303 with 4.4.4 kk lock bootloader. It should work on unlock bootloader but you have kernel which is simpler solution.
@Andrej732
Thanks for your work
Xperia M2 D2303 on K.K. 4.4.4