Hey there guys! Thanks in advance for taking the time if you're reading this... thing is I got totally hooked up on Android since 8 days ago, haven't slept much, I learnt a HUGE LOT in these past days... specially here at XDA... well, what brings me here is the following, learnt to root, to upgrade and do some minor tweaking... and now I find myself addicted to this old Samsung Fascinate I just got, it was an odissey to activate on my local carrier, had to learn to program it myself and all the stuff... well, thing is that Stock rom was kinda like missing something, so I adventured to the unknown... I'm going for KitKat... but I'm stuck at CM10, could flash CM10.1, but the only ROM could be flashed on my phone is missing it's WiFi, and can't find a fix... so... will a lovely soul help me a bit with just a word of wisdom on where to next? below I paste the list of things I've done so far so you guys have any ideas and that way I don't make you guess more than the needed... a zillion thanks in advance!!
1. Started at stock CI500_VZW_EH03_GB_CM.tar.md5 withit's atlas.pit
2. odin'd cwm-recovery-ALL.tar (CwM voodoo lagfix recovery v.2.5.1)
3. flashed root su-2.3.6.1.x succesfully
4. odin'd cwm4_fixed_for_cm7-ODIN (for cm7) and rebooted in recovery again
5. wiped the big 3 (data wipe, cache + dalvik)
6. flashed update-cm-7.2.0-Fascinate-signed.zip succesfully (waited for reboot 5 mins aprox) (no data for my Fassy on CM7)
7. wiped the big 3 again (twice, now CwM is v.5.0.2.8)
8. flashed teamhacksung-ota-eng.BUILD2.zip succesfully
9. automatically back into recovery which turned into v5.5.0.4, now for flashing cm_fascinatemtd-mtd-eng.BUILD14.zip succesfully (not after wiping data, cache and dalvik 2 times each)
10. prompted the msg: installation from zip complete, rebooted and waited for the CM9 to fully boot
11. reboot into recovery again to flash cm-10-20120721-UNOFFICIAL-fascinatemtd.zip after double wipe for the 3 to-wipe elements
12. phone rebooted to CwM recovery v6.0.1.0 and continued flashing CM10, once succesfully booted... back into recovery
13. wiped ONCE only cache and dalvik
14. got error: This ROM uses incompatible partition layout, your /data will be wiped upon installation, run this update.zip again to confirm install", looked for the same ROM and tried to reflash, came to recovery automatically where it reads down below: "CWM based Recovery v6.0.3.3., warning no file_context"
15. rebooted to recovery again, again tried to flash the same CM10.1 file, after a couple of minutes it read: Install from sdcard complete
16. wiped cache and dalvik and after that booted CM10.1, realized I couldn't go to recovery mode... tried and odin'd the CwM4 that came with CM7
17. could enter recovery mode with the the button way, installed gapps-jb-20130812-signed.zip and kernel-Devil_4.2.2_fassy_07-17.zip
18.... started all over, couldn't get past from that point, any of the few ROMS I try for the Fassy give some kind of error (on the third, fourth even fifth attempt of flashing), am I missing something? ohh! btw... can't get TWMP to run properly on my phone... I think that limits me a little more, also, can't get to find the latest CwM v.6.0.6.4 for the Fascinate (if anyone would be so kind with a little direction on the topic, it'd be hugely appreciated!
thanks a zillion in advance to whoever stops by and gives a little help
Related
My P5100 had CM10 nightly on it and was running fine until I upgraded to the latest version of CM10 after wiping the cache & Dalvik cache. After the upgrade I couldn't get Google Play to run even after wiping its data and fixing permissions so I tried to do a CWM restore. Unfortunately there was a fault restoring the Data partition and now my tablet is stuck at the animated bootscreen. If I long-press the power button it powers off but immediately restarts. There is no way to start in in recovery or flash mode. I've plugged it into my PC and the Samsung Android ADB interface is showing but the other references to the tablet all have a yellow triangle in Device Manager. I'm hoping some clever person can help me rescue the tablet with ADB. Thanks!
dwl99 said:
My P5100 had CM10 nightly on it and was running fine until I upgraded to the latest version of CM10 after wiping the cache & Dalvik cache. After the upgrade I couldn't get Google Play to run even after wiping its data and fixing permissions so I tried to do a CWM restore. Unfortunately there was a fault restoring the Data partition and now my tablet is stuck at the animated bootscreen. If I long-press the power button it powers off but immediately restarts. There is no way to start in in recovery or flash mode. I've plugged it into my PC and the Samsung Android ADB interface is showing but the other references to the tablet all have a yellow triangle in Device Manager. I'm hoping some clever person can help me rescue the tablet with ADB. Thanks!
Click to expand...
Click to collapse
IF CWM is not working use Odin to flash CWM again then use CWM to flash CM10,
You may need to do a factory reset (full wipe) from CWM.
If all else fails use Odin to flash stock JB ROM
DigitalMD said:
IF CWM is not working use Odin to flash CWM again then use CWM to flash CM10,
You may need to do a factory reset (full wipe) from CWM.
If all else fails use Odin to flash stock JB ROM
Click to expand...
Click to collapse
Thanks but Odin cannot see the tablet to re-flash the recovery.
Downlods mode
Then flash new firmware
sembre said:
Downlods mode
Then flash new firmware
Click to expand...
Click to collapse
That's the problem - I cannot access download mode
UPDATE - it just started in download mode! I can manage from here!!
Just for the record you can install adb on the pc and run the command 'adb reboot recovery'. This will force the tablet to reboot in recovery mode.
Sent from my GT-I9300 using xda app-developers app
Jeez, this has taken up most of the day to fix. I came across many problems I have not previously experienced:
1. When the tablet was stuck at the boot animation and I tried to turn it off by long-pressing the power button it immediately restarted. The only way I could get it to turn off was by long-pressing the power button whilst it was connected to my PC.
2. Flashing the stock ROM with Odin appeared to complete successfully but it would never fully boot, it always got stuck at the black & white Samsung screen. Same problems turning it off as above.
3. Flashing CWM with Odin caused the tablet to reboot into the stock ROM which would not load, in the end I had to untick the "reboot" button in Odin, power it off then manually restart with the Vol- & power buttons.
4. The only way I could get a bootable ROM was by flashing CM10 with CWM. I tried to restore 2 previous CWM backups but on each occasion there was an error restoring the Data partition and I got stuck at the scenario at (1). The backups were made to the external SD card with CWM Touch - is the Touch version unreliable?
I would be really interested if anyone could shed any light on any of this stuff!
For how long did you let it install during the first reboot? It happened to me too, and it took about 10 minutes, maybe even more...
Also, did you try in the "Mount and storage" cwm menu the options "format system", "format data", "format cache" and "format preload" options, prior to re-flashing a ROM? I have read somewhere that for a clean install it's better to do this, as it really clears everything that could mess up the system between two different bases ROMs (like CM and stock).
What I do everytime is using in CWM these 4 "format" options, plus "wipe" system, cache and dalvik, then immediately after this I flash with cwm the new "zip" copied on the card. Then the first reboot is much longer than usual, as at this stage it installs the files, rebuild the dalvik cache etc.
Good luck
dwl99 said:
2. Flashing the stock ROM with Odin appeared to complete successfully but it would never fully boot, it always got stuck at the black & white Samsung screen. Same problems turning it off as above.
Click to expand...
Click to collapse
I think I gave it a good 20 mins to boot. When I got up this morning there was an error message saying that there was no room to install any more apps even though I had very few installed. Settings -> Storage would not calculate the space available so I figured that the partitions had become corrupted. I did the step by step format you described and reflashed & it all seems to be OK now.
Hi All,
I have the Telstra HTC One XL, and have just recently attempted to install CM10 ROM - however have run into some problems that I would appreciate some advice to rectify. I had recently updated to Jelly Bean OTA.
I followed the guide on these forums - http://forum.xda-developers.com/showthread.php?t=1859478
I Successfully unlocked bootloader by following the steps at HTCdev.com
I Successfully installed TWRP Custom Recovery
I Downloaded CM10 as per - http://forum.xda-developers.com/showthread.php?t=1790032. I transferred this as well as Google Apps onto my phones storage.
When attempting to install CM10, I created the Nandroid backup as recommended, and proceeded to wipe the mentioned items using TWRP (a guide I saw said to wipe everything). This is when my Nandroid back-up got wiped. TWRP gives you the option to wipe cache, delvik cache, factory reset, system, external storage, internal storage and format data. I did alll of these, and this was my mistake I believe? I proceeded to try and install CM10 and gapps from internal storage (I had to re load these back on after I wiped everything), and the install of CM10 displayed as successful.
Upon rebooting to system, the HTC screen comes up first and then goes to the CM10 animation. The phone then stays on this animation (rotating circle) for up to 10-15 minutes.
I have read thread after thread with people experiencing similar issues, and have tried rectifying my problem with various versions of roms and different guides out there. I can still boot into recovery (TWRP) mode via bootloader, and this means I can still mount my phone's storage onto my PC and have access to the storage directory. As I have deleted the Nandroid backup though, and because the ROM's won't install, I am stuck in no man's land.
There must surely be a way to have a ROM installed (even if its back to stock Telstra) from the position I am in, it would be greatly appreciated if someone may be able to point me in the right direction.
Thanks,
Robbie
maybe yall need to "fastboot flash boot boot.img" now
robbie.d said:
TWRP gives you the option to wipe cache, delvik cache, factory reset, system, external storage, internal storage and format data. I did alll of these, and this was my mistake I believe?
Click to expand...
Click to collapse
Why do people keep doing this??? Just because TWRP gives you all those options, doesn't mean you should use them.
Sometimes, people will say to do a "full wipe" when flashing a ROM. But that term is a bit misleading. Factory reset (from TWRP, never from hboot), wipe Dalvik and wipe cache is all that is technically required when flashing a new ROM. Some people like to wipe more "just in case". But if you aren't completely confidant in what you are doing, keep in simple and don't make it more complicated than it needs to be.
I don't know if wiping everything is the cause of your woes, but it certainly didn't help, and caused you to do some extra steps.
Flash boot.img via fastboot as previously suggested. Otherwise, just try to re-download and flash the files agin. Its seems that some people are having troubles booting after flashing CM10 (even after doing the correct wipes and flashing boot.img). Doesn't seem to be much rhyme or reason, but just flashing again has fixed the problem for at least one person.
Thanks so much, such a simple fix! That has me booted up into CM10.
I have installed cm-10-20130107-NIGHTLY-evita and cm-10.0.0-evita , however with both of these versions, my touch screen is not working once it boots up. I can function with the volume up/down, and with the power buttons, but cannot get past my SIM card lock screen.
I noticed this thread http://forum.xda-developers.com/showthread.php?t=2083314 (no solution yet)...
Does anyone have a solution to this issue that seems a common one?
Alternatively, more than happy to get an alternative ROM on my phone in the interim...Can someone recommend me a ROM?
Again, I really appreciate the quick response to my problem, very happy my phone is in operation!
I've got a T-Mobile phone with stock updated to the last version, with TWRP 2.6.3.0 and root. Everything worked fine for a couple of months.
A month ago the phone started to boot loop with no apparent reason. I've wiped everything, re installed stock, rooted and used the phone again. I've thought it might be an app updated that screwed something.
Anyway, I've only got the basic apps on the phone and today it happened again. I've read that I need to boot into bootloader and selecr "CLEAR STORAGE", I've tried that but it goes into recovery and there I can only wipe the data. I've did that and rebooted and it didn't help.
Any other ways to fix this without re installing the rom?
I think that if you use the clear storage option, you will have to reinstall the rom. I believe it wipes the system partition as well.
If you want to do this, you should flash the stock recovery (get it here)
Go into the bootloader and select the clear storage option.
Then you can flash CWM or TWRP recovery again and install the ROM.
I am a relatively new android user but do enjoy flashing roms, kernels etc
My problems began when i was trying to flash a new rom on my Nexus 5
I was trying to flash this rom http://forum.xda-developers.com/showthread.php?t=2655722 but despite doing a factory reset and wiping the dalvik cache and cache it refused to boot in to the new rom
I tried to flash the rom multiple times but without success, eventually when trying to boot into recovery to try again i was greeted with an unthemed TWRP recovery asking for a password despite the fact that i had a custom theme and multirom installed I tried to proceed anyways but was greeted with E: unable to mount storage
In desperation i tried to solve this problem and found this
UsoftTech :: WwW.UsoftTech.CoM ::
TWRP asking for password
After unboxing my Nexus 5, here's what I did:
1. Booted into bootloader
2. fastboot oem unlock
3. Flashed TWRP v2.6.3.0
4. Booted to recovery
The screen that greeted me says "Please Enter Your Password".
I can hit the cancel button below this which takes me to the normal TWRP screen. I then pushed SuperSU to /sdcard, but when I flash it it fails because it's unable to mount /cache or storage.
When I reboot to the system, it takes an awfully long time (approximately 30s) to progress past the "Google" screen, and then it just seems to sit on the booting animation forever.
Any help?
EDIT: Solved my own problem.
Hit cancel at the password screen, then go into Wipe and then do a factory reset by swiping. Then go back into Wipe and press the 'Format data' button. You have to type 'Yes', and it will take a few seconds. After that everything should work normally.
TWRP asking for password
Click to expand...
Click to collapse
I now fear that i maybe without both a rom and all my files such as my music that was stored on my phone.
Is there any way for me to undo the damage i may have done to to my phone?
You can't recover the data. But you can push files over with ADB.
Sent from my Nexus 7 using Tapatalk
JoJostar said:
I am a relatively new android user but do enjoy flashing roms, kernels etc
My problems began when i was trying to flash a new rom on my Nexus 5
I was trying to flash this rom http://forum.xda-developers.com/showthread.php?t=2655722 but despite doing a factory reset and wiping the dalvik cache and cache it refused to boot in to the new rom
I tried to flash the rom multiple times but without success, eventually when trying to boot into recovery to try again i was greeted with an unthemed TWRP recovery asking for a password despite the fact that i had a custom theme and multirom installed I tried to proceed anyways but was greeted with E: unable to mount storage
In desperation i tried to solve this problem and found this
Wrong thread.
d
Click to expand...
Click to collapse
Hi, so short story is.
1. I had a backup of my stock rom that i did using twrp.
2. I flashed Franco Kernel for COS 13 downloaded from his website (https://kernels.franco-lnx.net/OnePlusOne/6.0.1/anyKernel/)
3. When i flashed i performed a Wipe dalvik cache from recovery
4. Reboted phone, and started optimizing apps but suddenly it rebooted.
5. Started optimizing apps but when it showed optimizing app 1 of 103 the phone keept restarting.
6. I decided to restore my backup made from TWRP, but then phone got stuck and restated everytime from the CYANOGENOS logo.
7. Since it was not booting, i decided to install from fastboot a clean CM13.
8. Flashed, finished and then the phone restarted, but heeey, again stuck in the CYANOGENOS Logo and restarting when the logo shows up.
9. I freak out and I don't know what to do.
So far:
fastboot is working
Cyanogen Recovery is Working ( tried the wipe from that, but still no luck)
When I plug the device directly to my PC, it shows "QHSUSB_BULK", but as i say: fastboot and COS recovery are working.
Can you guys help me, please
First of all, I let the phone charge till 100% on screen (yes, the charger indicator was working aswell)
Well, since my device was able to boot into both Recovery and Fastboot modes, I decided to flash a custom recovery one more time to replace the COS recovery. I flashed CWM 6 (because before TWRP was not helping) and performed a "backup" of the whole rom, just to see if it worked, and it did. After that, i wiped /factory reset from CWM.
Rebooted the device, and voilá I guess. The phone was able to boot into CM 13, now I'm happy to see that I was able to recover from this issue.
Still have no clue about why the FrancoKernel ended in a bootloop. Was the cache wiping a bad idea ?
leokook said:
First of all, I let the phone charge till 100% on screen (yes, the charger indicator was working aswell)
Well, since my device was able to boot into both Recovery and Fastboot modes, I decided to flash a custom recovery one more time to replace the COS recovery. I flashed CWM 6 (because before TWRP was not helping) and performed a "backup" of the whole rom, just to see if it worked, and it did. After that, i wiped /factory reset from CWM.
Rebooted the device, and voilá I guess. The phone was able to boot into CM 13, now I'm happy to see that I was able to recover from this issue.
Still have no clue about why the FrancoKernel ended in a bootloop. Was the cache wiping a bad idea ?
Click to expand...
Click to collapse
Yes,that's where it all went wrong.You should never wipe anything while flashing a custom kernel.
Mr.Ak said:
Yes,that's where it all went wrong.You should never wipe anything while flashing a custom kernel.
Click to expand...
Click to collapse
Lesson learned.