Hi,
is it possible somehow to cleare the partitions "deeper" then it's possible with the build in format command inside CWM?
I tried the fastboot erase (system, data, boot) with the result "permission denied" also.
The problem is the Moto G got messed up during the update to 4.4.
Since that moment the Moto G won't boot up with any stock Rom i flashed and i checked up many, many different stock roms (4.3 and 4.4.2).
It is possible to access recovery. (only CWM-swipe is working, CWM-touch, TWRP or the stock recovery won't boot) (Somehow TWRP booted once, but never again...) Sometimes i even can't access CWM-swipe, than I have to erase userdata and cache inside bootloader.
The other thing is it was possible to boot up the G with the Lego Rom, but it rebooted very often (30secs, 1min, 10secs....)
At this moment even that doesn't work it's getting stuck inside the bootlogo like every other custom rom i tried (Slim, CM11).
This behaviour makes me belief that things must be messed up depper inside.
I like to wipe everything!
Try this to restore your system
http://forum.xda-developers.com/showthread.php?t=2644703
I dont know what happened woth your g , but this delets everything except of the bootloader and then flashes the normal stock Rom, so that your moto g is like new.
It could be that sth. is wrong with your recovery as you cant wipe or flash anything, maybe flashing another recovery via fastboot would make you able to flash roms again and you wont need to restore stock.
Hopefully this works but remember that it doesnt metter what you do, you are responsible for everything and noone else. I dont guarentee that this works.
Hi,
this is what i had done about 40 times with almost 20 different stock roms. They all doesn't boot up
The Lego-Rom is the onlyone which had booted up completly but rebooted automaticly. Now Lego is hanging in bootlogo.
Like i wrote in the first post. CWM-swipe is the only recovery that still works most of the time. And I tried the stock recovery, CWM-touch (philz-touch) and TWRP.
I need to go deeper with the wipe/format if it is possible.
Otherwise i need to dump the G.
Thats really weird. If this all doesnt work then i dont know.
Yep, this is why I'm asking for help! Maybe someone know more.
ikarugaski said:
Yep, this is why I'm asking for help! Maybe someone know more.
Click to expand...
Click to collapse
I WAS IN A SIMilar situation a few days back
i couldnt boot up nor boot to recovery so to make a slong story short, i simply took a system img and a boot img and a cwm recovery img and fasboot flashed all 4 one at a time and somehow it worked fully stock but at least i could reset up all my stuff from there.
kep i mind before this method i i tried the guide "restore stock moto g rom" for 2 days straight with fastboot failing to flash it each time. if ur ok with starting anew apps wise try to flash a stock rom.
Related
So I was cruising around the Nexus S forums and found a rom I liked after I unlocked and rooted my phone.
I flashed Paranoid Android and then flashed the Matr1x kernel. Thus putting me in a neverending bootloop.
No ability to go back to CWM so I can't restore. And I can't put it in download mode so no ODIN.
What the heck do I do?
Can anyone help?
BTW if this is actually called a soft brick I'm sorry my terminology might be off.
Also I did this because the last phone I did extensive flashing with was an HTC Inspire 4G and it was easy to flash stuff just clear everything and flash what you wanted no bootloops. Sadly this phone not so much.
Hmm... No recovery...I've been stuck in a bootloop but I had recovery!
Sorry for the useless post, I cant help you..
Are you able to get into bootloader?
Usually when a bootloop occurs you should still be able to go in recovery.
When you say "no ability to access CWM" do you mean ROM Manager? Or the recovery mode?
What happens when you try to access the recovery mode?
same issue like urs
http://forum.xda-developers.com/showthread.php?t=1775933
try clean install;
flash Rom-Wiper.zip
flash Dalvik-Wiper.zip
then;
factory reset,
Format the system, data, cache, boot & partitions of your device.
I mean no access to recovery. CWM is Clock Work Mod Recovery. I have no access to fastboot either. The only thing my phone can do is bootloop.
You have to be mistaken.
Press power and volume up to get into fastboot ( bootloader). Then pick recovery....
That rom or kernel will not erase recovery. If your phone is in a bootloop it is making it past the bootloader
So it appears it as if I was mistaken. I got into fastboot and booted into CWM I'm still confused as to what I did, but I think I corrupted the Kernel.
It was the weirdest thing though. I tried it at least a dozen times, then I tried to run down the battery and try it again afterwards, and it didn't work so I gave up. Then I tried it again about 5 minutes ago and it worked. I'm sorry I cause you guys so much confusion. I've been doing this for so long I guess I just didn't doubt I was doing it right.
Hi all,
not sure why this predicament is happening to me, but currently I can't push any custom rom to my photon Q...
0. I installed a millions of ROMs and know how to do and using TWRP 2.6
1. Yesterday I experienced several File I/O errors during installing Pac-man ROM.
2. after TWRP full format, Installation was okay and it was also bootable, you can set up your phone just like everyday, but you cannot reboot... stuck in the moto logo everytime you reboot, and I had to RSD/FXZ restore :crying:
3. Nothing can bring this phone back with TWRP, Only RSD / FXZ restore can save the situation...
4. a stock ROM of FXZ seems okay and normally reboot, but I went back to #2, but in vain...
Any clue? My phone's flash simply borked?
palmwangja said:
Hi all,
not sure why this predicament is happening to me, but currently I can't push any custom rom to my photon Q...
0. I installed a millions of ROMs and know how to do and using TWRP 2.6
1. Yesterday I experienced several File I/O errors during installing Pac-man ROM.
2. after TWRP full format, Installation was okay and it was also bootable, you can set up your phone just like everyday, but you cannot reboot... stuck in the moto logo everytime you reboot, and I had to RSD/FXZ restore :crying:
3. Nothing can bring this phone back with TWRP, Only RSD / FXZ restore can save the situation...
4. a stock ROM of FXZ seems okay and normally reboot, but I went back to #2, but in vain...
Any clue? My phone's flash simply borked?
Click to expand...
Click to collapse
yes,i have the same problem,i try a lot times.
use cwmrecovery,it will solve all
Try CWM or Open Recovery. Try also installing custom rom from internal storage.
Thanks for the input, but neither CWM nor open recovery helped a lot after each tests, unfortunately exactly the same problem.
Only the first boot was possible with the first custom ROM right after RSD recovery.
This is extremely weird and I don't understand what this situation means.
Stock ROM looks okay since I can restore from the TWRP backup, but no other roms were recoverable from my last backups none the less flesh installation... stuck in the red moto logo, not even in the boot screen...
palmwangja said:
Thanks for the input, but neither CWM nor open recovery helped a lot after each tests, unfortunately exactly the same problem.
Only the first boot was possible with the first custom ROM right after RSD recovery.
This is extremely weird and I don't understand what this situation means.
Stock ROM looks okay since I can restore from the TWRP backup, but no other roms were recoverable from my last backups none the less flesh installation... stuck in the red moto logo, not even in the boot screen...
Click to expand...
Click to collapse
Try to remove sdcard and see if phone boots normaly without it.
What is "twrp full format"?
Thanks,
suddenly all got back to normal. I simply don't know what happened and what I have missed. maybe I have been too jittery to wait for a boot time ?
If anyone happened to have experienced any of my symptom, just wait for another min to diagnose something !
BTW, when I refer to 'twrp full format', I meant there was a format menu inside TWRP wipe section.
I have been trying for hours to install both TWRP and CWM recoveries, and my phone will not accept them.
It goes through the process, yet upon the reboot into recovery, it just starts normally.
the message on the phone is: Mismathched partition size (recovery)
I have a Canadian version of 4.4.2 stock rom on my Moto G.
It is boolader unlocked and rooted.
Any ideas how to install the recovery?
My ultimate goal is to install a rom that supports russian language.
retfeg said:
I have been trying for hours to install both TWRP and CWM recoveries, and my phone will not accept them.
It goes through the process, yet upon the reboot into recovery, it just starts normally.
the message on the phone is: Mismathched partition size (recovery)
I have a Canadian version of 4.4.2 stock rom on my Moto G.
It is boolader unlocked and rooted.
Any ideas how to install the recovery?
My ultimate goal is to install a rom that supports russian language.
Click to expand...
Click to collapse
same problem here! brand new phone, 4.4.2 o2 UK.
the mismatched partition size error is not important i know that.
have tried Philz (got it to work once, but after rebooting, had gone again. ever after letting it fix the rom rewrite on exit!). also tried stock CWM 6046 and 6047.
have tried entering recover immediately after flashing.
have tried flashing multiple times.
have tried different usb ports.
ideas please?
i've never had this much trouble with any phone (have experience over 3 years with Blade, G300, Xperia range etc.)
edit: tried using fastboot -S 0 parameter also, seems to make no difference. phone won't boot into recovery. this is slightly different to the problem i had with old phone, that one would boot Philz but not boot any ROMs. this one is booting stock ROM. if i can get Philz to "take" again i could try flashing CM, but i wanted to stay on stock, and just root it..
edit2: just started working! bizarre.. hope this doesn't jinx it. i wrote two recovery images with -S 0 and it works, not sure if because of that or something else. btw Philz won't backup the stock rom, odd - it just errors out, CWM standard works though.
hurrah! i rebooted normally, went back to fastboot and recovery still there. this is with recovery-clockwork-6.0.4.7-falcon.img
now i can hopefully root it..
wonder if my 3rd moto g will get any easier! this is a huge PITA of random non-workiness so far.
FINAL EDIT: FIXED!!! Sparsechunk files 1,2and 3 have to match the exact name with the firmware folder sparsechunk files.
I did not notice that my firmware sparsechunk files ended in .0 .1 .2 and not 1 2 3 like the tutorial had listed, so I was fastbooting the wrong sparsechunk command. That was the final fix that finally worked for me.
Original post:
SHORT VERSION:
My god this has been one crazy root journey.
I have done absolutely EVERYTHING I could pull up on google to fix my phone, and what seemed to be the final piece to the puzzle, still has not fixed anything.
My phone is bricked, and i would really appreciate help at this point.
The current problem:
When I turn on my phone, it vibrates, and displays the WARNING BOOT LOADER UNLOCKED screen, and stays there forever.
I can access my boot loader, and recovery, but I dont know what to do at this point.
I tried a quick flash stock recovery kit kat with moto tool AIO, and it didnt help.
Any ideas?
LONG VERSION (backround info may help to understand the current issue)
Now, if you want to know what began all of this, continue reading, otherwise the above is my current issue.
After successfully unlocking and rooting my phone
I downloaded SWITCHME, an app that lets you create multible users on the phone. the instructions say that you can use a sub account to test and mess around with anything because you can simply go back to the admin account that has everything untouched.
That was a lie.
1.I deleted .setup, along with a few other things THAT WHERE NOT FLAGGED AS IMPORTANT, assuming the phone would still work. and my phone went bonkers, displaying this infinite message: UNFORTUNATELY, SETUP HAS STOPPED. It was impossible to use the phone, and I could only access bootloader.
2.After endless googling, driver downloading, xda mod installing, I managed to set up my boot loader to do the guide restore stock firmware:http://forum.xda-developers.com/showthread.php?t=2542219
Sadly, I flashed the wrong model number package, I was flashing x35, when I later discovered that my phone is x45.
Flashing the x35 firmware bricked my phone further, to where it would "fail to boot up" and would only display bootloader over and over after attempting to turn the phone on.
3. Simple, I realized I flashed the wrong thing, so I downloaded the x45 firmware from the firmware teem on this website, flashed all of the commands, and bam, the phone starts up with the boot loader warning, and DOES NOT get stuck in the previous boot loader issue I had.
But now the phone wont get past that warning screen so... now im pissed.
Please, if anyone can help me I would greatly appreciate it, Im so close to getting my phone back...
EDIT 2: Looks like the phone wont stay shut down, I realized that if I dont open up boot loader, it will turn itself on and display the warning message.
EDIT:
The stuffs I have, ready to try anything:
CWM touch mod
Moto Tool AIO
Minimal ADB and Fast boot
RETUS x1045 factory firmware
All directories, folders, cmd commands are set up and working properly between all of the programs.
The phone appears to be responding to all cmd commands properly.
I also have the windows one touch super boot root method. (he superboot-windows.bat )
Im afraid to try anything major after freshly flashing the x45 firmware that seemed to bring me one step closer without the help of someone else.
I restored stock to my phone using this link yesturday http://www.ibtimes.co.uk/how-restore-motorola-moto-g-stock-firmware-1447290
it may work for you
I have almost the same problem as if the fastboot not install anything despite not display errors
great that you got it done.
maybe my few cents about my "bricking" story. (xt1032 moto g)
yesterday i wanted to change the rom from cm11 nightly to another custom rom like ehndroix/carbonrom...
first i thought that will be done in a few mins, after having already flashed a custom rom.
then the story began, getting adb work, but, 2weeks ago everything was setup and went fine. dunno why my laptop lost the "drivers".
thats the link which solved that problem: tinyurl . com / kgffjh4 [sorry cant post links outside of xda yet, spam protection]
so after a few hours of getting that fixed i, i began flashing.
suddently i got stuck in bootscreen (ehndroix logo for example)...
then i wanted to go back with my previous backup made internaly of clockworkmod. though i couldnt restore my backup because there was an error message while restoring /data of my backup
also when restoring to factory/wipe in cwm there was that error message about clouldnt "touch" /data, i dont remember the message exactly.
after thinking i bricked everything, i though lets wipe my internal sdcard, maybe that causes the /data error.
then i restarted the device and went for a shower... after 15min i came back and my device was "started".
now i dont know that exactly helped, maybe wiping all data on my phone, or just letting my device boot for a "long" time...
so, thats my yesterdays brick story.
do a factory reset if the bootloader has that option.. otherwise install or run/boot a custom revovery, then either
try the factory reset option there and reboot or..
wipe everything and install a rom
Ok try this, I'm was a victim too:
Relock and unlock bootloader
Download and flash latest Philz
From there format everything...EVERY PARTITION...switch F2FS
After switching wipe every partition again
Select and execute the other 3 wiping option ie., Clean to install new ROM and the other 2 (I can't remember now)
Do this all over again via TWRP too
Now, this is important, don't use the mfastboot for restoring stock...use the one provided by Google for its Android SDK
Flash the stock images
Flash the Moto Razr boot animation and not the one for Moto G to remove the warning sign
I'm 99.99% sure your phone will boot properly
After the phone boots, reflash the Moto G bootanimation
Good Luck!
ngr.hd said:
Ok try this, I'm was a victim too:
Relock and unlock bootloader
Download and flash latest Philz
From there format everything...EVERY PARTITION...switch F2FS
After switching wipe every partition again
Select and execute the other 3 wiping option ie., Clean to install new ROM and the other 2 (I can't remember now)
Do this all over again via TWRP too
Now, this is important, don't use the mfastboot for restoring stock...use the one provided by Google for its Android SDK
Flash the stock images
Flash the Moto Razr boot animation and not the one for Moto G to remove the warning sign
I'm 99.99% sure your phone will boot properly
After the phone boots, reflash the Moto G bootanimation
Good Luck!
Click to expand...
Click to collapse
I try to flash any recovery but after entering I get an android and says no commands, and installation does not throw errors
angelgzg said:
I try to flash any recovery but after entering I get an android and says no commands, and installation does not throw errors
Click to expand...
Click to collapse
You're still in stock recovery.
Use fastboot flash recovery xyz.zip to flash philz recovery
Use this when you're in bootloader mode.
ngr.hd said:
You're still in stock recovery.
Use fastboot flash recovery xyz.zip to flash philz recovery
Use this when you're in bootloader mode.
Click to expand...
Click to collapse
I flash the recovery but rebooted into recovery, the android keeps popping up (no commands)
FINAL EDIT: FIXED!!! Sparsechunk files 1,2and 3 have to match the exact name with the firmware folder sparsechunk files.
I did not notice that my firmware sparsechunk files ended in .0 .1 .2 and not 1 2 3 like the tutorial had listed, so I was fastbooting the wrong sparsechunk command. That was the final fix that finally worked for me.
Sorry I'm traveling a d couldnt update thread fast enough.
Hi.
A friend gave me his Moto G1 2013 to install Linage OS but I'm really having troubles with it, first of all it doesn't allow me to install TWRP, when I type fastboot flash recovery recovery.img it says that it installs but it doesn't, when I try to boot on it it just doesn't boot, the way I had access to TWRP was typing fastboot boot recovery.img...
When I got in I did the first step when you install a new Custom ROM that is wipe system, cache and dalvik cache, then I tried to install the ROM zip file but it gave me "error 7" I looked for solutions and I found one that is modifying updater-script file, I did it but it gave me another error about mount system, I looked for solutions too and I found one that is modifying file system format to anotherone and then bringing it back to the original format but still having the same error.
After that I decided to go back to stock ROM, I have flashed many times the stock ROM with fastboot commands but it just doesn't boot into the OS, when I try to boot the phone it boots into bootloader again... Any solution to this? Is it a hardware problem? Please help me I'm so embarrased with my friend.
Same thing happened to me!
Basidialfiddle said:
Hi.
A friend gave me his Moto G1 2013 to install Linage OS but I'm really having troubles with it, first of all it doesn't allow me to install TWRP, when I type fastboot flash recovery recovery.img it says that it installs but it doesn't, when I try to boot on it it just doesn't boot, the way I had access to TWRP was typing fastboot boot recovery.img...
When I got in I did the first step when you install a new Custom ROM that is wipe system, cache and dalvik cache, then I tried to install the ROM zip file but it gave me "error 7" I looked for solutions and I found one that is modifying updater-script file, I did it but it gave me another error about mount system, I looked for solutions too and I found one that is modifying file system format to anotherone and then bringing it back to the original format but still having the same error.
After that I decided to go back to stock ROM, I have flashed many times the stock ROM with fastboot commands but it just doesn't boot into the OS, when I try to boot the phone it boots into bootloader again... Any solution to this? Is it a hardware problem? Please help me I'm so embarrased with my friend.
Click to expand...
Click to collapse
Hi! I tried something similar with a similar result. I first unlocked my Moto G's bootloader. Then installed TWRP using fastboot. After that I tried flashing Resurrection Remix rom which failed. I've been stuck in a kind of bootloop since then. My handset powers up, finds something wrong, tries to go into recovery, fails and does this over and over again.
Since I am able to boot into bootloader mode, I tried to flash the stock rom by following instructions from this thread https://forum.xda-developers.com/showthread.php?p=47820707#post47820707
I have tried different variations from many different forums (fora?) all with the same result. Still stuck in the bootloop-thingie.
Btw, I also tried the unbricking guide from this thread
https://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788 without any success. My phone shows up as a Motorola ADB device and also as XT1033 in Device Manager when its plugged in.
Anyone know anything to help me out?
gaurav.kar said:
Hi! I tried something similar with a similar result. I first unlocked my Moto G's bootloader. Then installed TWRP using fastboot. After that I tried flashing Resurrection Remix rom which failed. I've been stuck in a kind of bootloop since then. My handset powers up, finds something wrong, tries to go into recovery, fails and does this over and over again.
Since I am able to boot into bootloader mode, I tried to flash the stock rom by following instructions from this thread https://forum.xda-developers.com/showthread.php?p=47820707#post47820707
I have tried different variations from many different forums (fora?) all with the same result. Still stuck in the bootloop-thingie.
Btw, I also tried the unbricking guide from this thread
https://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788 without any success. My phone shows up as a Motorola ADB device and also as XT1033 in Device Manager when its plugged in.
Anyone know anything to help me out?
Click to expand...
Click to collapse
Hi, I found the solution time ago, sorry for answering to late, hope I can still be helpful.
Well, what I did is, I booted into TWRP, then I did a total format to the storage, after that I did something kind of crazy, I switched my storage format to anotherone and then I turned it back to how it was before (example: I was on fat32, I switched to exFAT and then I switched again to fat32) after doing that I tried to flash LinageOS and it allowed me, it booted and now my friend has Android Oreo on his Moto G1
Hope it works for you mate, those situations are very frustrating, good luck