I have HTC One X- AT&T(Evita) With S4 processor. In fastboot, First three Lines are:
Tempered
Locked
S off
I went through complete process, mentioned at HTC devs, but un-successful. the following error occured:
Error 160
MID not allowed
I have to change CID, but for doing this, i must have root access.
Please anybody guide me step by step procedure to root/bootloader unlock?
You don't need root access, because you have s-off. You can simply use fastboot to change the CID to SuperCID.
Code:
fastboot oem writecid 11111111
Next time, do a bit of research before creating a thread. Pretty much every question you could think of asking has been asked, and answered within our forum. Check out all of the links in my signature, almost everything you'll ever need can be found there.
Sent from my Evita
Again Question sir
I have HTC One X- AT&T(Evita) With S4 processor. In fastboot, First three Lines are:
Tempered
Locked
S ON
I went through complete process, mentioned at HTC devs, but un-successful. the following error occured:
Error 160
MID not allowed
I have to change CID, but for doing this, i must have root access.
Please anybody guide me step by step procedure to root/bootloader unlock?[/QUOTE]
jezi251 said:
I have HTC One X- AT&T(Evita) With S4 processor. In fastboot, First three Lines are:
Tempered
Locked
S ON
I went through complete process, mentioned at HTC devs, but un-successful. the following error occured:
Error 160
MID not allowed
I have to change CID, but for doing this, i must have root access.
Please anybody guide me step by step procedure to root/bootloader unlock?
Click to expand...
Click to collapse
The at&t CID is blocked at htcdev, so you need to get SuperCID in order to unlock your bootloader. Reading the stickied threads (specifically the Evita FAQ thread) in the section you've just posted in world have uncovered this information. You're gonna want to read all of the threads in my signature so you can familiarise yourself with this device, and so you don't ask a question that's already been asked and answered a million times before.
Please post your hboot version, you'll find that in your bootloader screen.
You said earlier that you have s-off, why it s-on now?
Sent from my Evita
Evita pvt ship s-on
HBOOT-2.14.0000
Earlier mistaken s off written
Sent from my HTC One X using Tapatalk
Have you read the threads I mentioned?
Sent from my Evita
First I have to root it for cid change whts the procedure in this situation??
Sent from my HTC One X using Tapatalk
You need to use the 3.18 root method. Full instructions in my How-To Guide For Beginners thread.
Sent from my Evita
recovery
when i follow the procedure of rooting...when it goes to recovery screen (white one) its wait for 5 to 8 seconds and then restart normally..i can't goto recovery ..why??
That doesn't really make sense. The recovery screen isn't white, are you talking about the bootloader? And can you please be more specific about what's happening? I can't help you if you're giving vague two sentence posts like that.
Sent from my Evita
twrp
when i install twrp 2.7..after enter the recovery mode white htc scree appears...when i install twrp 2.2.0..on recovery it opens but touch screen don't works no button works just power button works which locks the twrp...can u send me valid link of twrp 2.7 because at twrp website at 99% downloading stops...
Why did you flash 2.7 if it didn't download completely? That's a surefire way to brick your phone. The md5 wouldn't have matched either. You'll find downloads here:
http://goo.im/devs/OpenRecovery/evita
Sent from my Evita
details of my evita
timmaaa said:
Why did you flash 2.7 if it didn't download completely? That's a surefire way to brick your phone. The md5 wouldn't have matched either. You'll find downloads here:
http://goo.im/devs/OpenRecovery/evita
Sent from my Evita
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 2.14.0000
version-baseband: 0.24p.32.09.06
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: HT26GW303783
product: evita
platform: HBOOT-8960
modelid: PJ8310000
cidnum: 11111111
battery-status: good
battery-voltage: 4141mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-97c9a06e
hbootpreupdate: 11
gencheckpt: 0
can i update my jb to 4.3??how?
jezi251 said:
version: 0.5
version-bootloader: 2.14.0000
version-baseband: 0.24p.32.09.06
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: HT26GW303783
imei: xxxxxxxxxxxxxxxx
product: evita
platform: HBOOT-8960
modelid: PJ8310000
cidnum: 11111111
battery-status: good
battery-voltage: 4141mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-97c9a06e
hbootpreupdate: 11
gencheckpt: 0
can i update my jb to 4.3??how?
Click to expand...
Click to collapse
First thing you need to do is edit your IMEI out of that post, never post your IMEI publicly. It looks like you've successfully gotten s-off now too which is good. What kind of ROM do you want?
Sent from my Evita
rom
timmaaa said:
First thing you need to do is edit your IMEI out of that post, never post your IMEI publicly. It looks like you've successfully gotten s-off now too which is good. What kind of ROM do you want?
Sent from my Evita
Click to expand...
Click to collapse
i want that rom which works perfectly not issue of baseband,network ...etc...can u suggest me correct rom regarding to my specifications..now i upgraded my hboot to 2.15..
jezi251 said:
i want that rom which works perfectly not issue of baseband,network ...etc...can u suggest me correct rom regarding to my specifications..now i upgraded my hboot to 2.15..
Click to expand...
Click to collapse
I actually meant do you want a Sense ROM or an aosp ROM? Asking which ROM is best/most stable/fastest/prettiest, or asking for a suggestion isn't allowed so I can't answer that, here's why. To say one ROM is better is to infer that the others are inferior in some way. This is disrespectful to the devs who spend their spare time bringing us these awesome ROMs free of charge. Each user has different tastes anyway, the best way to see which ROM suits you is to flash a few and find out for yourself.
Our dev sections are as follows:
One XL Android Development (mainly Sense ROMs)
http://forum.xda-developers.com/forumdisplay.php?f=1541
One XL Original Android Development (aosp ROMs)
http://forum.xda-developers.com/forumdisplay.php?f=1726
Have a look through the available ROMs and pick one you think will suit you.
Sent from my Evita
evita
thanks buddy
recovery
jezi251 said:
thanks buddy
Click to expand...
Click to collapse
i want to update my recovery from 2.7.0.0 to 2.7.1.0..when i insert fastboot flash recovery openrecovery-twrp-2.7.1.0 in CMD
error:cannot open 'openrecovery-twrp-2.7.1.0'...
because i want to install A.P rom or carbon or candy cat..
justnow i have 4.1.1 stock version,s-off,tempered, hboot 2.15
help me!!
when i try to install any rom by twrp 2.7.0.0 it gives error ..only cm11 snapshot installs but sometimes it hangs ...so i restore to 4.1.1...
Is that the exact command you're giving? It looks like you're missing the ".zip" on the end of the filename. For example, if the filename is "openrecovery-twrp-2.7.1.0.zip" then the command should look like this:
Code:
fastboot flash recovery openrecovery-twrp-2.7.1.0.zip
If you have filename extensions (.exe, .doc, .zip) turned off in Windows, this could be the reason why you're missing the extension from the command.
Sent from my Evita
recovery
timmaaa said:
Is that the exact command you're giving? It looks like you're missing the ".zip" on the end of the filename. For example, if the filename is "openrecovery-twrp-2.7.1.0.zip" then the command should look like this:
Code:
fastboot flash recovery openrecovery-twrp-2.7.1.0.zip
If you have filename extensions (.exe, .doc, .zip) turned off in Windows, this could be the reason why you're missing the extension from the command.
Sent from my Evita
Click to expand...
Click to collapse
i have also tried with .zip ext but it not works
Related
I have this HTC one S, I am not sure which network phone is it. I bought is from someone else and he had no idea about network.
Right now when i press factory reset from volume down + power button. it brought me at this screen which say clockwork Mod recovery v 5.8.1.5
I am able to select only first 2 options which are reboot system now and install zip from sdcard . When i pressed install zip from sdcard its not doing anything and bringing me back on same screen
Could you please help me installing stock rom on this phone. ?
Thanks in advance guys
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
If you turn ur phone on with holding power and volume down you should be in your bootloader.
Can you tell us what stands on the top?
Locked/unlocked/relocked and which hboot version?
Sent from my HTC One S using xda premium
this is the info
Tampered
Unlocked
VLE PVT ship s-on RL
HBOOT-1.08.0000
Radi-0.16.31501S.06_3
open DSP-v23.1.0.32.0323
eMMC boot
Mar 21, 2012, 16:01:09
Just curious to know what this information means , please let me know each line if possible. Appreciate your help
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
Tampered: no stock recovery
Unlocked: your bootloader is looked
VLE: Ville: HTC One S
S-ON: security on
Radio: your radio Version
You have to lock your bootloader.
Download the all in one toolkit which you can find in the development section. There are all necessary files.
Be sure you have installed the HTC sync driver.
1. Connect your mobile To your pc when your are in the screen where you can see hboot version etc.
2. There should be "hboot USB" in blue.
3. Navigate to hboot and press power.
4. It should change to "fastboot USB" in red.
5. Then open the all in one toolkit on your PC.
6. Open the folder where ADB and fastboot exe are located.
7. Press shift and right click somewhere in the folder and open the command line.
8. Then type in "fastboot oem lock"
9. If you take a look to your phone you should see that the "unlock" changed To "relocked"
That was the first step.
10. Go To the development section in this forum and look for the wwe europe ville ics ruu 2.31 or sth like that.
11. Download the file
12. Doubleklick the file
13. Follow the instructions
14. Let the ruu install everything
15. If everything works fine you should be on official ICS 4.0.4 with Sense 4.1 now
Good luck!
I hope I wrote an easy understandable instruction.
If u experience any problems feel free to post it here.
I'm sure I or someone else can help you.
Sent from my HTC One S using xda premium
NQNH , thanks a lot for this easy and nice explanation, its really helpful for a noob like me. I have few more questions but lets resolve this issue first. Okay I tried all steps you mentioned and it worked like a charm. just got stuck at final step. Please help.
In CMD i got this
'C:\Users\Owner\Desktop\HTC' is not recognized as an internal or external comman
d,
operable program or batch file.
C:\Users\Owner\Desktop\HTC custom rom procedure\One_S_All-In-One_Kit\data>fastbo
ot oem lock
...
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642032 (0x1FDDFD70)
FAILED (status read failed (Too many links))
finished. total time: 0.941s
C:\Users\Owner\Desktop\HTC custom rom procedure\One_S_All-In-One_Kit\data>
This is the error message when i tried step 8, but when i checked the screen it shows relocked now , seems like it worked okay.
i tried this file
http://forum.xda-developers.com/showthread.php?t=1941402
Everytime i runs this RUU application file , after passing thru all steps it says ROM utility stopped working, Seems like i am almost done but just stuck at last point.
Hello NQNH, i tried it one more time and finally passed thru that screen. it started ROM update utility but got back with this error msg
Error (131) customer ID error
The ROM update utility cannot update your android phone
please get the correct ROM update utility and try again
I am using RUU : 1.0.6.2012
please let me know if i can use any other utility
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
What do you get when you type in
fastboot getvar cid
?
Try this RUU
http://www.androidfiles.org/ruu/sec...02.31_10.09a.50.04L_release_275655_signed.exe
Sent from my HTC One S using xda premium
I tried RUU which you suggested , Thanks NQNH but sorry this time it came back with error (130) , model ID error.
fastboot getvar cid : BM___001
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
Seems that you have a branded phone. (Bell Mobile Canada?)
This ruu should run fine:
http://www.androidfiles.org/ruu/sec...02.04_10.08g.50.04L_release_280275_signed.exe
Sent from my HTC One S using xda premium
Thanks Thanks Thanks Thanks a lotttttttttt, I don't know if pressing thanks button is good enough to appreciate your help. I learnt a lot from this session. If you don't mind , just for curiosity can i ask you few more questions,
Tampered (Does it mean somebody tried to install custom rom on it or something else ? )
Unlocked
VLE PVT ship s-on RL ( does S-on means this phone is unlocked or some thing else ? )
HBOOT-1.08.0000 ( is it same like version number in iphone , is it baseband version number, where i can find this number in phone settings ? )
Radi-0.16.31501S.06_3
open DSP-v23.1.0.32.0323 ( don't know what it means , please explain )
eMMC boot ( don't know what it means , please explain )
Mar 21, 2012, 16:01:09 ( is it manufacturing date or date when it was tempered )
Thanks again for your help ..
bindudhindsa said:
Thanks Thanks Thanks Thanks a lotttttttttt, I don't know if pressing thanks button is good enough to appreciate your help. I learnt a lot from this session. If you don't mind , just for curiosity can i ask you few more questions,
Tampered (Does it mean somebody tried to install custom rom on it or something else ? )
Unlocked
VLE PVT ship s-on RL ( does S-on means this phone is unlocked or some thing else ? )
HBOOT-1.08.0000 ( is it same like version number in iphone , is it baseband version number, where i can find this number in phone settings ? )
Radi-0.16.31501S.06_3
open DSP-v23.1.0.32.0323 ( don't know what it means , please explain )
eMMC boot ( don't know what it means , please explain )
Mar 21, 2012, 16:01:09 ( is it manufacturing date or date when it was tempered )
Thanks again for your help ..
Click to expand...
Click to collapse
glad to hear that I helped you.
Tampered means that someone already changed something on the phone (unlocked/relocked/custom recovery)
A comparison should be.. if you bought a new pc and if you open the case you have to break the seal. The "Tampered" say that you had break this seal on the phone (e.g. by unlocking the bootloader)
S-ON means that the security flags are on. Its a system protection so nobody can manipulate system data.
S-ON + locked bootloader -> you can do nothing, no root, no custom things
S-ON + unlocked bootloader -> you can flash custom recovery, root, custom rom (you can see an unlocked bootloader as a compromise between S-ON and S-OFF
S-OFF -> you can do everything what you want, change bootloaderGUI, bootanimations, splashscreens.
Unlocked means that you bootloader is unlocked. If its locked you cant install custom recovery, root and custom firmware. It has to be locked when you install a RUU.
You cant find your HBOOT version in your phone settings because its the version of the bootloader.
the bootloader is independed from the rom you are on. Its like the BIOS from your PC and your ROM is Win7 where you either cant find the bios version.
Radio is the module which is responsible for mobile data etc.
no/wrong/corrupt radio = no network/no signal
openDSP .. i don't know
eMMC boot, I guess that this is the partition where the bootloader is located.. but I'm not sure.
Mar 21, 2012, 16:01:09 is the date when .. difficult to explain .. when the development of the RUU was finished?
if I wrote something wrong please correct me.
Thanks a lot for this very helpful information. Appreciate your help. Kind of person like you are the reason these forums are running successfully and helping novice people like me. Thanks again.
AW: [Q] Trying to get HTC one S on stock rom? Please help ?
Thanks for your words
Sent from my HTC One S using xda premium
Hello.
I'm having same problem with getting back on stock firmware...
After trying to flash into CM10, i got stock in CM boot logo.
So trying to get back to original using RUU.
But it just looks like I can not get right one...
I did everything like in posts above, and when I enter "fastboot getvar cid" I got "HTC_Y13"
Any idea which RUU is correct for that?
I'm still trying, so maybe it will be fools luck... Or maybe someone can put me on point?
auronn said:
Hello.
I'm having same problem with getting back on stock firmware...
After trying to flash into CM10, i got stock in CM boot logo.
So trying to get back to original using RUU.
But it just looks like I can not get right one...
I did everything like in posts above, and when I enter "fastboot getvar cid" I got "HTC_Y13"
Any idea which RUU is correct for that?
I'm still trying, so maybe it will be fools luck... Or maybe someone can put me on point?
Click to expand...
Click to collapse
your cid is a unbranded eu cid.
try any unbranded eu ruu (3.16 or earlier)
Hello everyone,
So, 2 days in front of PC, reading forums and trying. No luck... So try to post it here.
I want to flash to CM10.
Bootloader is unlocked.
Recovery is installed (TWRP S4)
Root is done.
Security S-ON.
When I try to install CM10, everything went fine, but when It have to reboot it just stuck in CM booting logo loop...
And since you can't remove memory card on HTC One S, I think I have no other option how to reinstall stock firmware. And my problems starts...
I relocked bootloader.
Download already like five different RUU's...
The problem is, I can not locate my version, it's blank...
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23NW410019
(bootloader) imei: 359901040772549
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4124mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
So everytime I start RUU, in the screen Current information about your Android phone" "Image version" is blank and the one with "Verify that you want to update the ROM version" "From Image Version" is blank...
When I push "Next" it goes "Checking", then "Rebooting Bootloader", "Erasing User Data" and "Sending".
When it comes to "Updating Signature" I'm getting error code...
Phone is bought in Norway, and by checking cid: HTC_Y13, I can see that it's HTC-Nor. So which one of RUU's I have to use?
I also tried to flash zip RUU, using One_S_All-In-One_Kit_v3.5 with same no luck...
Really don't know what to do... Any help would be appreciated...
Thank you in advance!
real187 said:
your cid is a unbranded eu cid.
try any unbranded eu ruu (3.16 or earlier)
Click to expand...
Click to collapse
Thank you, I'm downloading and will try this now:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
Already tried those:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed.exe
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.109_Radio_16.12.20.02U_16.05.20.16_M2_release_263131_signed.exe
RUU_VILLEPLUS_U_JB_45_HTC_Generic_1.14.999.50_Radio_1.10r.50.05.19_10.22a.50.08L_release_294323_signed.exe
And also:
OTA_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_1.11.50.05.28_10.27.50.08L_release_301852xf01hejl416oev96.zip
using One_S_All-In-One_Kit_v3.5 with no luck...
Does any body can tell me the difference between Ville, VilleC2 and VillePlus?
real187 said:
your cid is a unbranded eu cid.
try any unbranded eu ruu (3.16 or earlier)
Click to expand...
Click to collapse
Thank you a lot!!!
This one worked:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1. 11.50.05.28_10.27.50.08L_release_301814_signed_2_4 .exe
auronn said:
Hello everyone,
So, 2 days in front of PC, reading forums and trying. No luck... So try to post it here.
I want to flash to CM10.
Bootloader is unlocked.
Recovery is installed (TWRP S4)
Root is done.
Security S-ON.
When I try to install CM10, everything went fine, but when It have to reboot it just stuck in CM booting logo loop...
And since you can't remove memory card on HTC One S, I think I have no other option how to reinstall stock firmware. And my problems starts...
I relocked bootloader.
Download already like five different RUU's...
The problem is, I can not locate my version, it's blank...
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23.......
(bootloader) imei: 3599...............
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4124mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
So everytime I start RUU, in the screen Current information about your Android phone" "Image version" is blank and the one with "Verify that you want to update the ROM version" "From Image Version" is blank...
When I push "Next" it goes "Checking", then "Rebooting Bootloader", "Erasing User Data" and "Sending".
When it comes to "Updating Signature" I'm getting error code...
Phone is bought in Norway, and by checking cid: HTC_Y13, I can see that it's HTC-Nor. So which one of RUU's I have to use?
I also tried to flash zip RUU, using One_S_All-In-One_Kit_v3.5 with same no luck...
Really don't know what to do... Any help would be appreciated...
Thank you in advance!
Thank you, I'm downloading and will try this now:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
Already tried those:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed.exe
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.109_Radio_16.12.20.02U_16.05.20.16_M2_release_263131_signed.exe
RUU_VILLEPLUS_U_JB_45_HTC_Generic_1.14.999.50_Radio_1.10r.50.05.19_10.22a.50.08L_release_294323_signed.exe
And also:
OTA_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_1.11.50.05.28_10.27.50.08L_release_301852xf01hejl416oev96.zip
using One_S_All-In-One_Kit_v3.5 with no luck...
Does any body can tell me the difference between Ville, VilleC2 and VillePlus?
Click to expand...
Click to collapse
Firstly, I would recommend removing part of your IMEI and Serial Numbers from your post, it could be used in bad ways by other people.
Ville is the HTC One S with a Snapdragon S4 chipset, clocked at 1.5GHz (dual core) otherwise known as z520e. (You have this phone)
VilleC2 is what became of the HTC One S when HTC ran out of Snapdragon S4 chipsets in many parts of the world due to a shortage. It has a Snapdragon S3, clocked at 1.7GHz (dual core) otherwise known as z560e.
VillePlus is a Special Edition version of the HTC One S, only available in Taiwan. It has the same processor as the Ville, except comes in a white body instead of the normal grey or black options and has 64GBs of internal storage. The other two have 16GBs internal storage. This phone is quite rare.
You should try RUUs only that say ville, and not VillePlus or VilleC2. These won't work and may even irreversibly damage your phone.
OTAs only work when you already have a previous firmware version. Let's say you were on ICS, a Jelly Bean FOTA is released (firmware over the air) and installs ("flashes") on top of your existing ICS installation, keeping your apps and data.
RUUs wipe all data and wipe everything on the phone when installing through a USB connection.
Could you specify what error code you get on the RUUs?
----
The reason why CM10 didn't boot is because you didn't flash the boot.img.
You need to extract the boot.img from the CM10 zip and put that into your "working folder" (the folder with adb and fastboot files in it)
Open up a command prompt / terminal in that folder and type
fastboot flash boot boot.img
when you are in FASTBOOT USB mode in the bootloader.
Go to Fastboot. Plug in your USB with the phone. Now, ctrl and r --> type cmd --> cd to C:/where your adb is --> fastboot read cid
Then type the 8 digit string that you get. It would help us determine your network provider.
I have had this great phone for around 3-4 months now. In the second week of owning it, I already unlocked the bootloader and rooted my phone. It is not S-OFF, because I'm under the impression that you need to buy extra hardware.
What I want to know is if there is any way that I can flash 3.18 RUU on my AT&T branded (but I use T-Mobile) evita? If there is, can you provide me with a link?
Again, I'm already rooted and I'm bootloader unlocked. Thanks
You don't need to buy any hardware or modify your phone physically to gain s-off, all you need to do is follow the instructions on this thread.
If you have SuperCID (which you most likely do) and try to RUU while you're s-on you'll brick your phone. So my advice is to go to the s-off thread I linked to before, and follow the instructions.
Once you've done that you can run the 3.18 RUU.
Sent from my Evita
Thanks, mate. I appreciate the fast answer. Naturally, I hate being left behind; and seeing that most of the new ROMs require S-Off for the 3.4 kernel, I decided it was time to upgrade. I'll give it a try, as I'm currently trying to flash a ROM because I mistakenly flashed one of ^. Now, it's stuck on the the HTC splash screen, and I guess it's just the first boot scenario. However, it has taken a curious amount of time.
Yeah it's pretty much gonna be essential from now on anyway so you might as well get it outta the way.
What ROM did you try to flash? Also, what firmware/hboot are you currently on?
Sent from my Evita
I tried flashing CarbonROM. It gave me that (Status 7) error so I figured it was the 3.4 kernel giving me problems. After that, I tried flashing a previous version of CarbonROM, and it'd just stay stuck in the splashscreen (This is the ROM that I was discussing in my previous post). Now I tried to flash RageXL, and it's bootlooping. So I'm figuring that I should just go to a stock ROM and get this procedure done, and THEN flash a custom ROM. #BadLuckw3r3w0lv33
Ok. Yep it's the fact that you haven't yet upgraded via the RUU that these ROMs won't boot. Try flashing something like MagioRom or ViperXL just to get the s-off procedure done.
Sent from my Evita
Hmph. I'm pretty sure I've downloaded the latest Google and HTC USB drivers. Still, when I enter "adb reboot bootloader", this pops up:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device offline
I have enabled USB debugging on my HOXL. Perhaps, it's the HTC Sync Manager? I have no clue beyond that point. I even tried restarting my phone AND computer.
EDIT: Nevermind, I just manually rebooted to the bootloader and continued from there. I am now S-Off
:thumbup:
Sent from my Evita
Btw.... If I helped you, please press the thanks button.
Sent from my Evita
Help me please
timmaaa said:
You don't need to buy any hardware or modify your phone physically to gain s-off, all you need to do is follow the instructions on this thread.
If you have SuperCID (which you most likely do) and try to RUU while you're s-on you'll brick your phone. So my advice is to go to the s-off thread I linked to before, and follow the instructions.
Once you've done that you can run the 3.18 RUU.
Sent from my Evita
Click to expand...
Click to collapse
Can i install 2.20 firmware after installing 3.8 firmware.. I have s-off and unlocked bootloader and had my AT&T htc one x evita rooted before i installed 3.18 firmware... please help i cant root my phone on 3.18....
hirias said:
Can i install 2.20 firmware after installing 3.8 firmware.. I have s-off and unlocked bootloader and had my AT&T htc one x evita rooted before i installed 3.18 firmware... please help i cant root my phone on 3.18....
Click to expand...
Click to collapse
If you are already s-off, just install custom recovery, then flash a rooted ROM or SU to get root.
Sent from my HTC One XL using xda app-developers app
Will this RUU work if I have a locked bootloader and s-on?
Chudawg62 said:
Will this RUU work if I have a locked bootloader and s-on?
Click to expand...
Click to collapse
As I said earlier in the thread, SuperCID + s-on + jb RUU = brick.
Sent from my Evita
guys can you please help me here?
my phone is
*** LOCKED ***
EVITA PVT SHIP S_OFF RL
CID-11111111
HBOOT-1.14.0002
RADIO-0.19as.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Junn 11 2012,14:36:28
i dont understand thiss phone that well so can you please tell me if its safe to install the stock jellybean RUU on my phone?
Yes you're s-off so you can run the RUU with minimal risk.
Sent from my Evita
3.17 or 3.18?
Hi,
First off, thanks everyone - this forum has provided me a wealth of information.
I'm wondering if I can run non-sense based roms (ex. Cyanogenmod 10.2 or 11) without downgrading the touchpanel firmware. Here are my phone specs:
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.31a.32.45.16_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.08.111.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT27XXXXXXXX
(bootloader) imei: 359691XXXXXXXXX
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4050mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-de589c6eef
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Currently running ViperXL Android 4.2.2, stock kernel. Had to upgrade to HBOOT 2.15 to get rid of the random reboots and signal drop.
Before I upgraded HBOOT from 2.14 to 2.15 I was pretty sure I was on 3.17. I'm not even sure how to check this again? Would the upgrade to hboot 2.15 put me on 3.18? Sorry for the n0ob questions, help would be appreciated.
Current aosp ROMs no longer require you to down the ts firmware, they haven't since about June. You're a bit confused about the terminology, you didn't just upgrade to the 2.15 hboot, you upgraded to the 2.15 firmware, so you're currently on the 2.15 firmware. The hboot is only one component of the firmware as a whole.
Long story short, yes you can flash non-sense ROMs.
Sent from my Evita.
timmaaa said:
You don't need to buy any hardware or modify your phone physically to gain s-off, all you need to do is follow the instructions on this thread.
If you have SuperCID (which you most likely do) and try to RUU while you're s-on you'll brick your phone. So my advice is to go to the s-off thread I linked to before, and follow the instructions.
Once you've done that you can run the 3.18 RUU.
Sent from my Evita
Click to expand...
Click to collapse
can i run this RUU if i'm on CM10.2 ? and it says it will delete ALL from my phone, do i need to flash a rom and gapps right after i did that or will it still boot on CM10.2 ?
The RUU returns your phone to a stock configuration (ROM/recovery). You need to flash TWRP recovery again afterwards and then your ROM.
Sent from my Evita.
timmaaa said:
The RUU returns your phone to a stock configuration (ROM/recovery). You need to flash TWRP recovery again afterwards and then your ROM.
Sent from my Evita.
Click to expand...
Click to collapse
it doesn't work, i'm getting the usb connection error (170) but the cmd adb devices works just fine and the rumrunner s-off procedure went fine too...maybe i'm missing something ?
I get Error 160 at HTC Dev MID not allowed. The HOX is from AT&T, it's SIM unlocked and it's totally stock (***LOCKED*** and S-ON) phone never modified. Current image version: 1.73.502.1 I tried to install 3.18 RUU but I get error that it's the wrong image file. In few words what I would like to do is to unlock the bootloader. Hope you can help me, thanks!
I also tried to update to 2.20 and I get ERROR 140 BOOTLOADER VERSION ERROR. I'm using AT&T stock RUUs due to my HOX is totally stock.
You can't just unlock at htcdev, you need to get SuperCID first. What are your bootloader details?
Sent from my Evita.
version: 0.5
version-bootloader: 2.14.0000
version-baseband: 0.16.32.09.01_3
version-cpld: None
version-microp: None
version-main: 3.18.502.6
version-misc: PVT SHIP S-ON
serialno: HT24WW302150
product: evita
platform: HBOOT-8960
modelid: PJ8310000
cidnum: CWS__001
battery-status: good
battery-voltage: 3980mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-97c9a06e
hbootpreupdate: 11
gencheckpt: 0
RUU's didn't work because I already was on 3.18, my bad. But still can't unlock bootloader through HTC dev, I keep getting same error!
I remembered that before unlocking bootloader I had to get cid to 11111111 but just could found 2.20 exploit
I need 3.18 exploit so I can get to SuperCID, do you have a link @timmaaa ?
Click the link in my signature, it's in that thread.
Sent from my Evita.
timmaaa said:
Click the link in my signature, it's in that thread.
Sent from my Evita.
Click to expand...
Click to collapse
I don't know if I am in 1.73.502.1 (as RUU's said) or if I am at 3.18.502.6 (which I find very rare because this device is at 4.0.3)
philohtc said:
I don't know if I am in 1.73.502.1 (as RUU's said) or if I am at 3.18.502.6 (which I find very rare because this device is at 4.0.3)
Click to expand...
Click to collapse
You are most likely already on 3.18, since the hboot for that is 2.14 (as shown in your bootloader details).
What does it say when you go to Settings>About>Software information>Software number?
Can somebody give me a link to SuperCID 3.18 in Windows (not Linux)? I checked but only founded for 2.20 thanks
I told you to click the link in my signature. All of the root exploits can be found within the thread that's in my signature. As redpoint said you need the 3.18 method.
Sent from my Evita.
Software number: 1.73.502.1 710RD
Sent from my HTC One using xda premium
Why are you posting that?
Sent from my Evita.
timmaaa said:
Why are you posting that?
Sent from my Evita.
Click to expand...
Click to collapse
@redpoint73 asked for it
Sent from my HTC One using xda premium
I see. Have you tried the 3.18 root method like we suggested?
Sent from my Evita.
@timmaaa I checked it out but I don´t have Linux, even if I had it, I really can´t get to config properly the sdk, because it doesn´t recognize the adb command eventhough I changed the directory or root from terminal.
You don't need Linux, you extract the attachment and enter the commands manually in a command prompt in Windows. It's the only way you're going to unlock your phone. You don't need the full SDK, only adb/fastboot.
Sent from my Evita.
ok i'll check that
timmaaa said:
You don't need Linux, you extract the attachment and enter the commands manually in a command prompt in Windows. It's the only way you're going to unlock your phone. You don't need the full SDK, only adb/fastboot.
Sent from my Evita.
Click to expand...
Click to collapse
it does not recognize "ln" command
You're typing it incorrectly then.
Sent from my Evita.
hello my xl died installing cyanocenmod enters recovery mode but wing when installing a rom I get something wrong and the bootloader, and let me install ggaps kernls someone help me me instruction
Nowhere near enough information. Bootloader details, recovery version, ROM build, and anything else relevant are all required.
You need to read the Evita FAQ thread and the How-To Guide For Beginners thread, both links are in my signature.
Sent from my Evita
Moved to Q&A
timmaaa said:
Nowhere near enough information. Bootloader details, recovery version, ROM build, and anything else relevant are all required.
You need to read the Evita FAQ thread and the How-To Guide For Beginners thread, both links are in my signature.
Sent from my Evita
Click to expand...
Click to collapse
evita pvt ship s -on rl
hboot-1.14.0002
radio-0.09as.32.09.11_2
opendsp-v29.1.0.45.0022
emmc-boot
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0002
(bootloader) version-baseband: 0.19as.32.09.11_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT253W309399
(bootloader) imei:
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: 11111111
(bootloader) battery-status: low
(bootloader) battery-voltage: 3382mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 1a7fdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
C:\Users\new\Desktop\One_X_ATT_All-In-One_Kit_v\data>
What about the rest of the information? I asked for it for a reason, having to ask twice is a waste of time.
PS. You need to edit the IMEI number out of your post asap, never post your IMEI publicly.
Sent from my Evita
timmaaa said:
What about the rest of the information? I asked for it for a reason, having to ask twice is a waste of time.
PS. You need to edit the IMEI number out of your post asap, never post your IMEI publicly.
Sent from my Evita
Click to expand...
Click to collapse
recovery-clockwork-touch-6.0.4.8-evita
cm-10.2.1-evita.
The ruling is the following:assert failed: getprop("ro.bootloader") == "2.15.4444"
getprop("ro.bootloader") == "2.15.0000" ||
getprop("ro.bootloader") == "2.13.0000"
E:Error executing updater bynary in zip '/sdcard/..... Error flashing zip etc.....
Did you read the Evita FAQ thread I mentioned? The answer to your problem would have been easily found if you took my advice in my first reply. You need to update your firmware, but to do that you first need to get s-off. Facepalm s-off is easy, you'll find it here:
http://forum.xda-developers.com/showthread.php?t=2155071
Then you can update your firmware, follow the instructions in my How-To thread:
http://forum.xda-developers.com/showthread.php?t=2593382
Sent from my Evita
timmaaa said:
Did you read the Evita FAQ thread I mentioned? The answer to your problem would have been easily found if you took my advice in my first reply. You need to update your firmware, but to do that you first need to get s-off. Facepalm s-off is easy, you'll find it here:
http://forum.xda-developers.com/showthread.php?t=2155071
Then you can update your firmware, follow the instructions in my How-To thread:
http://forum.xda-developers.com/showthread.php?t=2593382
Sent from my Evita
Click to expand...
Click to collapse
I have the stock recovery? for s-off
installing soffobin 3
C:\Users\new\Desktop\EZToolkit Advanced (Evita)\EZToolkit Advanced (Evita)>adb p
ush "C:\Users\new\Desktop\ADB Tools\soffbin3" /data/local/tmp/
error: device not found
C:\Users\new\Desktop\EZToolkit Advanced (Evita)\EZToolkit Advanced (Evita)>adb s
hell chmod 744 /data/local/tmp/soffbin3
error: device not found
C:\Users\new\Desktop\EZToolkit Advanced (Evita)\EZToolkit Advanced (Evita)>adb s
hell su -c "/data/local/tmp/soffbin3"
error: device not found
Done! Now you can boot into bootloader and see if you have s off!
C:\Users\new\Desktop\EZToolkit Advanced (Evita)\EZToolkit Advanced (Evita)>pause
Presione una tecla para continuar . . .
Recovery has nothing to do with getting s-off. You need to get your phone booting first to do the s-off process. Flash a Sense ROM, and make sure you turn on usb debugging in Settings/Developer Options.
Sent from my Evita
timmaaa said:
Recovery has nothing to do with getting s-off. You need to get your phone booting first to do the s-off process. Flash a Sense ROM, and make sure you turn on usb debugging in Settings/Developer Options.
Sent from my Evita
Click to expand...
Click to collapse
Flash a Sense ROM? and I can not activate debugging sd bootloop that I am I can only enter the recovery and fastboot
Once you flash a Sense ROM, you will be able to turn on usb debugging. Sense ROMs do not perform bootloader checks so you will not have any problems flashing one of those.
Sent from my Evita
timmaaa said:
Once you flash a Sense ROM, you will be able to turn on usb debugging. Sense ROMs do not perform bootloader checks so you will not have any problems flashing one of those.
Sent from my Evita
Click to expand...
Click to collapse
Might pass me the link sense rom
You'll find them in our Android Development section.
Sent from my Evita
timmaaa said:
You'll find them in our Android Development section.
Sent from my Evita
Click to expand...
Click to collapse
this is getting hard I can not do s-off not to do and if I install a ruu? Might look I need help? cid 1111111 I have installed kernel Elemetal my phone does not start
You can't run an RUU or you'll brick your phone, s-on + SuperCID + jb RUU = brick. What ROM did you flash?
Sent from my Evita
timmaaa said:
You can't run an RUU or you'll brick your phone, s-on + SuperCID + jb RUU = brick. What ROM did you flash?
Sent from my Evita
Click to expand...
Click to collapse
I understand that .. you recommend I do to revive it if I'm not managing to do s-off
Why aren't you answering my questions? I need to know which ROM you flashed. I don't like having to repeat myself, it's a waste of time. Have you even flashed a Sense ROM yet?
Sent from my Evita
timmaaa said:
Why aren't you answering my questions? I need to know which ROM you flashed. I don't like having to repeat myself, it's a waste of time. Have you even flashed a Sense ROM yet?
Sent from my Evita
Click to expand...
Click to collapse
sorry I'm using the translator and not eh not tried which are not
I'm not sure what you're saying there, bit you need to install a Sense ROM, have you done that?
Sent from my Evita
I have not done what I esplicar Might as done and what should I install rom
timmaaa said:
I'm not sure what you're saying there, bit you need to install a Sense ROM, have you done that?
Sent from my Evita
Click to expand...
Click to collapse
I have not done what I esplicar Might as done and what should I install rom
Hi, I got the SIM unlock code from my carrier for my HTC One S but it doesn't appear to work. It's also a lot shorter than the code I used on my Xperia Z1 (same carrier) but they say that it's supposed to be valid.
My HTC One S has the bootloader unlocked and CyanogenMod 10.2 installed on it. Could not having a locked bootloader and stock ROM be the reason the unlock code doesn't work?
Thanks!
polybius said:
Hi, I got the SIM unlock code from my carrier for my HTC One S but it doesn't appear to work. It's also a lot shorter than the code I used on my Xperia Z1 (same carrier) but they say that it's supposed to be valid.
My HTC One S has the bootloader unlocked and CyanogenMod 10.2 installed on it. Could not having a locked bootloader and stock ROM be the reason the unlock code doesn't work?
Thanks!
Click to expand...
Click to collapse
You probably need the non modified stock firmware installed.
BTW you can also unlock it for FREE
Well, I did get the code for free
Yeah, I've been trying to restore everything to stock to find out but I'm having problems with that also. Perhaps I'll try the link you posted to verify the code. Maybe it's slightly different. Thanks!
Well, the code is the same, guess it just won't unlock without being stock ROM or something and I can't get it back to stock
polybius said:
Well, the code is the same, guess it just won't unlock without being stock ROM or something and I can't get it back to stock
Click to expand...
Click to collapse
Why can't you get it back to stock?
Any of the guides I follow don't seem to work. I relock the bootloader but then I can't seem to apply the matching RUU for the phone. What looks like the matching one (hboot and radio) is a ZIP file (OTA_Ville_U_JB_45_S_TELUS_WWE_3.16.661.4_1.13.50.05.31_10.30.50.08L_release_307532nohrvy5j6i2o2i8i.zip) and I'm not sure how to apply it. The exe RUU versions don't work either because, I'm assuming, they don't match my hboot and radio. I feel like a pretty competent guy when it comes to rooting and imaging Android devices but this just isn't working for me Thanks for your help.
polybius said:
Any of the guides I follow don't seem to work. I relock the bootloader but then I can't seem to apply the matching RUU for the phone. What looks like the matching one (hboot and radio) is a ZIP file (OTA_Ville_U_JB_45_S_TELUS_WWE_3.16.661.4_1.13.50.05.31_10.30.50.08L_release_307532nohrvy5j6i2o2i8i.zip) and I'm not sure how to apply it. The exe RUU versions don't work either because, I'm assuming, they don't match my hboot and radio. I feel like a pretty competent guy when it comes to rooting and imaging Android devices but this just isn't working for me Thanks for your help.
Click to expand...
Click to collapse
May you type in commandline:
fastboot getvar all
and post all values except your imei here?
version: 0.5
version-bootloader: 2.15.0000
version-baseband: 1.13.50.05.31
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: HT26EW403840
imei: xxxxxxxxxxxxxxxxxx
product: vle
platform: HBOOT-8960
modelid: PJ4011000
cidnum: TELUS001
battery-status: good
battery-voltage: 4146mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-64bedd38
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.068s
polybius said:
version: 0.5
version-bootloader: 2.15.0000
version-baseband: 1.13.50.05.31
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: HT26EW403840
imei: xxxxxxxxxxxxxxxxxx
product: vle
platform: HBOOT-8960
modelid: PJ4011000
cidnum: TELUS001
battery-status: good
battery-voltage: 4146mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-64bedd38
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.068s
Click to expand...
Click to collapse
Flash Viper 2.2 as sense base stock rom.
Use rumrunner to gain S-OFF
Flash any RUU you like
Thanks! I'll give that a try. I read you need SuperCID for S-OFF, does rumrunner do that for you?
polybius said:
Thanks! I'll give that a try. I read you need SuperCID for S-OFF, does rumrunner do that for you?
Click to expand...
Click to collapse
Rumrunner will get you S-OFF. Then you can change the CID.
Perhaps you know, I'm getting this when I try to image that Viper ROM.
assert failed: getprop("ro.product.device") == "ville"
Click to expand...
Click to collapse
polybius said:
Perhaps you know, I'm getting this when I try to image that Viper ROM.
Click to expand...
Click to collapse
Try to first flash the included boot.img before flashing Viper 2.1.0
or try try Viper 3
You need any sense based rom to get S-OFF
Ok, so, I guess I missed the part of installing Viper where it says to have TWRP and not ClockworkMod recovery >_<
Got TWRP on there, was able to flash Viper 2.1 EASILY. And it unlocked like a charm. THANKS!! Didn't have to get S-OFF for the unlock. What ROM is the best for the One S in your humble opinion? Should I still get S-OFF?
polybius said:
Ok, so, I guess I missed the part of installing Viper where it says to have TWRP and not ClockworkMod recovery >_<
Got TWRP on there, was able to flash Viper 2.1 EASILY. And it unlocked like a charm. THANKS!! Didn't have to get S-OFF for the unlock. What ROM is the best for the One S in your humble opinion? Should I still get S-OFF?
Click to expand...
Click to collapse
S-OFF means you can flash any stock RUU e.g unbranded and flash any radio version e.g. 1.20 and the kernel (boot.img) get flashed with the rom via recovery and has not to be flashed by fastboot command.
I actually use Candy 5 v1.5.0 but I can't say what fits your needs best
Does Candy have decent battery life? What is your general experience with it? I really want to put Lollipop on this phone
Also, do you have a good tutorial to remove the red Dev warning on boot?
polybius said:
Also, do you have a good tutorial to remove the red Dev warning on boot?
Click to expand...
Click to collapse
Battery performance is very good for me with Candy 5. I use my phone mainy for messaging and making calls (Its a phone lol). I can't say how long last the battery when you play games or surf the web heavily. For me the battery easy lasts two days.
For getting rid of the red warning you can flash a modded HBoot which can be found HERE. Make sure you use the same version number that is actually installed on your phone but "modded"
LS.xD said:
Battery performance is very good for me with Candy 5. I use my phone mainy for messaging and making calls (Its a phone lol). I can't say how long last the battery when you play games or surf the web heavily. For me the battery easy lasts two days.
For getting rid of the red warning you can flash a modded HBoot which can be found HERE. Make sure you use the same version number that is actually installed on your phone but "modded"
Click to expand...
Click to collapse
Hmmm. I have 2.15 but I seem to be getting an error during the flash: FAILED (remote: 41 model id check fail)
Is that the variance in model that you mentioned earlier?
polybius said:
Hmmm. I have 2.15 but I seem to be getting an error during the flash: FAILED (remote: 41 model id check fail)
Is that the variance in model that you mentioned earlier?
Click to expand...
Click to collapse
Seems so And I don't know how to solve it for PJ4011000. May be you can ask or look in the thread if somebody has successfully done it for your model. You probably can edit the flashable file, but I you should NOT try it, if you not exactly know how.