{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Users mostly search for Download Link so made a simple one
Key Features
SELinux enforcing, with init.d support
init.d support + other ramdisk tweaks
-O3 , Cortex A15 , Graphite , neon , vfpv4 Optimizations
Compiled from Latest SaberMOD GCC 4.10 Toolchain which is latest Toolchain with best optimizations
Suuport for intelliplug 2.3 hotplug driver
Faux Sound Support
USB Fastcharge support
LCD Color Control
Support undervolt/overvolting via sysfs interface/apps interface @myfluxi
Adaptive Voltage Scaling Support
More CPU Governors ( intelliactive , performance , conservative(updated) , powersave , Wheatley , ondemand , ondemandplus , abyssplug , abyssplugv2 , userspace , interactive , smartassH3 , Lionheart )
More I/O Schdedulers ( SIO , Deadline , CFQ , ROW , BFQ(v6) , FIOPS , No-op , V(R) , ZEN )
More GPU Governors ( simple , performance , ondemand , powersave , userspace , msm_adreno_tz )
added new power management mode "PowerSuspend" (Hello Battery)
add official f2fs kernel support + f2s optimization
exFAT AIO Optimization
Power efficient workques
added LZ4 compression (faster than LZO)
Frandom -Fast Kernel Number Generator driver added
Support for CPU BOOST code.
[*]File systems support: Ext2/3/4, FAT32, NTFS, CIFS, USB OTG , exFAT
Debugging is OFF by Default to save CPU cycles, and extend battery life.
UKSM for Page Merging
Added cdrom option to UMS-lun-devices (Now you can mount internal memory as CD-ROM)
Enabled 5 new TCP Congestion controls viz. ( Westwood, Veno,Vegas , BIC, Reno, HTCP )
Click to expand...
Click to collapse
Changelog:
https://dl.dropboxusercontent.com/u/117413382/g900p/changelog.txt
Click to expand...
Click to collapse
Downloads:
(XDA-Devdb):http://bit.ly/1nx92zY
(Mirror to Dev-Host: http://d-h.st/Ofq
Click to expand...
Click to collapse
Installation:
Place the zip in the SDCard
and Flash it in recovery
Click to expand...
Click to collapse
Sources:
https://github.com/GuneetAtwal/kernel_g900p
Click to expand...
Click to collapse
F.A.Q. - Read this before complaining!
1. This kernel works on Y or X rom?
A: It is only compatible with Touchwiz ROMs and i officially support Aliance , Omega , Echoe , XtrestoLite ROM only and users on other ROM are on their own risk and complaining about the Kernel will not be tolerated..!
2. OMG Battery Sucks...!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
3. How do I flash this?
A: Reading the OP, theres a reason why I added instructions on it.
4. Which App is the best for Controlling the Kernel?
A: Their are many apps in the Play Store but i personally recommend TricksterMOD or FauxClock rest its on you whether which you find most comfortable.
5. Getting Random reboots..! Any Help
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
7. Which Settings are best for XYZ ROM and XYZ thing..!
A: THe Default settings of the Kernel are the best and Balanced one but you can ask other users on the thread or can discuss which settings are the best..!
8. XYZ Feature doen't work in this Kernel on XYZ ROM..! You suckass, fix it..!
A: I don't know who you are. I don't know what you want. If you are looking for a fix, I can tell you I don't have the solution. If you leave now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I ignore you.
Click to expand...
Click to collapse
Credits:
-faux123
-every other dev whose code i incorporated in my kernel
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Note: Feel free to post anything even if it is OT i love to see Geek Talks , Benchmarks , Discussion going over my Thread
I currently don't own this device so i can't answer all the device Specific Questions so you users help each other and make things easy for all of us.
Lets make a better community here on this Thread
Cheers..!
XDA:DevDB Information
Blaze™ Kernel for G900P, ROM for the Sprint Samsung Galaxy S 5
Contributors
GuneetAtwal
Version Information
Status: Stable
Created 2014-05-29
Last Updated 2014-06-11
Reserved
..
Controllers
You can use Trickster MOD app to control all the functions of the kernel
you can download it here http://bit.ly/1lcuFGO
Click to expand...
Click to collapse
Some info on Governors and I/O Schedulers
http://forum.xda-developers.com/galaxy-s2/general/ref-kernel-governors-modules-o-t1369817
reserved
Can anyone test this one ?
Link:http://d-h.st/qSu
Success! I've got it booted up and running. Anything you want specifically looked at?
GuneetAtwal said:
Can anyone test this one ?
Link:http://d-h.st/qSu
Click to expand...
Click to collapse
Sent from my SM-G900P using XDA Free mobile app
I read in your other Blaze kernel thread (in the international forums) that someone from the Sprint GS5 tried out v10 and got it working, just no LTE!
The test kernel he just posted has no issues with LTE.
Joe0113 said:
I read in your other Blaze kernel thread (in the international forums) that someone from the Sprint GS5 tried out v10 and got it working, just no LTE!
Click to expand...
Click to collapse
Sent from my SM-G900P using XDA Free mobile app
Ok Guys its party time
Finally after lots of efforts here i present you my Blaze Kernel for S5 Sprint users and this kernel won't be inline with the International variant and i will be treating it as a different project
Enjoy...!
Running great for me so far. Thanks for sharing your work with us. Cheers!
Sent from my SM-G900P using Tapatalk
Im running stock so obviously knox notifies of security blah. Also, the health service FCs so no heart monitor, etc. Ill continue testing.
Glad to see another kernel finally pop up! Will likely give this a try over the weekend.
RevelationOmega said:
Im running stock so obviously knox notifies of security blah. Also, the health service FCs so no heart monitor, etc. Ill continue testing.
Click to expand...
Click to collapse
I read somewhere and tested, if you go into settings- build.prop and change ro.securestorage.support=true to
ro.securestorage.support=false
S health will work again. Not sure what to do about Knox crap though.
g.armour said:
I read somewhere and tested, if you go into settings- build.prop and change ro.securestorage.support=true to
ro.securestorage.support=false
S health will work again. Not sure what to do about Knox crap though.
Click to expand...
Click to collapse
100% correct. I did it, and S Health works fine for me.
What exactly isnt working on s health?
Sent from my SM-G900P using XDA Free mobile app
None of it, it just starts force closing.
Um?
Sent From My Galaxy S5 Far Far Away
Is there a governor you folks favor the most?
I've been jumping back and forth between smartmax and interactive.
crazymook said:
Is there a governor you folks favor the most?
I've been jumping back and forth between smartmax and interactive.
Click to expand...
Click to collapse
intelliactive + SIO or BFQ are the best settings
g.armour said:
None of it, it just starts force closing.
Click to expand...
Click to collapse
I think something else is conflicting with shealth. I can load it up just fine.
Sent from my SM-G900P using XDA Free mobile app
GuneetAtwal said:
intelliactive + SIO or BFQ are the best settings
Click to expand...
Click to collapse
SIO or BFQ? I dont think I've ever read those as being the top choices (but Ive been out of the game for a bit). Usually good things point to noop, no?
Related
this is my compiled kernel, builded from samsung source code (GT-S5360_GB_Opensource_Update2.zip). please read this whole post before you install this kernel in your device and don't expect something "WOW" from this kernel since its only my kernel for my daily usage.
the main interest of this kernel is to build a kernel which:
1. compatible to all rom (custom n stock)*.
2. simple, light, yet still customizable
3. save more batteries
4. decent performance
if you're looking for a kernel as described above, then this thread will give what you want.
the link :
Click to expand...
Click to collapse
special built kernel with a2sd full support -- for advance user
note: clearly stated for advance user. don't ask me why it didn't boot up in your rom.
Click to expand...
Click to collapse
basic feature:
1. init.d script support
2. Advance Power Management enabled (not 100% working but it solve the screen issue)
3. built in droidwal support and bacem tweak
4. 4 freq
5. a few more gov and io sched
how to: flash the file via CWM.
credits:
1. irfanbagus for the patch and bacem tweak
2. savie for the help for 4 freq
3. marcotoo for the nice discussion about kernel on his thread and the solution for deep sleep from his patch thread.
4. harish for the tools
5. maroc aka yahya, edoko, tegrak, sdadier, droidzone @github for source code
6. last but not least you...for support and nice development atmosphere here. keep follow the rules guys.
TERM OF USE AND SHARING:
this thread intent is for sharing. feel free to use, edit, distribute all material inside this thread which came from me. if there any parts of this mod which comes not from me please refer to the original dev I've mentioned in this thread. if want to share it to another forum or modify it you don't have to ask my permission. no need to credits, put links or whatsoever. you'll only need to remember that you should held all the responsibility by using this mod, modify it or distribute it. DO IT WITH YOUR OWN RISK
Click to expand...
Click to collapse
IMPORTANT NOTES:
1. please don't ask anything about CWM. I prefer to never put it on my kernel.
2. trying to fix the 3rd freq but still no luck. we have 312-x-624-832 freq but the (x) freq is still buggy and imperfect. I think we need some help to fix it. already tried with 416, 442, 468, 520 but the bug is still there.
3. sorry, no a2sd support at this moment. you can use dsixda's kitchen or harish's tools to build a kernel with repencis's ramdisk to make this kernel support a2sd by yourself. the good thing is that your a2sd will work but it will also make your device boot (a lot) longer. I prefer to not use it on my kernel since I never use a2sd.
4. I give you three 'cats' gov in this kernel
powercats = lazy --> performance
blackcats = smartassv2 --> balanced setting
activecats = intellidemand --> battery saver
they have been tweaked and renamed just to make you easier when choosing the govs.
5. if you have a2sd running in your device, please uninstall it before installing this kernel. or else, you'll get bootloop
changelog
v0.1 :
first released version
v0.2 :
- swap
- ext4
- more iosched
- optimized conservative for battery saving
- ciffs (not really needed but it will be usefull if someone might want to use it)
v0.3 :
- new freq configuration (312-468-624-832). less sudden jumped out freq from 312 to 624 but it still imperfect yet.
- new govs, wheatley removed. now conservative is set as default for battery saving option.
- configured iosched, sio as default.
- now it use a part of koneu patch to fix deep sleep problem
v0.4 :
- minor tune on the kernel source and configuration
- as requested, OTG stuff added**.
v0.5:
- minor tune on battery management
- tun.ko build in
- few sound API and driver added
- as requested, NTFS modules built in
v0.5.1:
- lil bit tuning. trying to fix ntfs problem
- KSM for page merging support
- HID support
v0.5.2:
- alternate version of 0.5.1 without any OTG related stuff
v0.6.9:
- 6 frequencies
- setting for conservative and blackcats modified to match the new freqs.
v1:
- 5 frequencies. 780mhz almost never used so I removed it (468 is a buffer to prevent the freq suddenly jump to max freq. it actually working at 312mhz)
- HID driver removed (you don't even know what it is)
- few API removed for lightweightness
- CIFS removed since almost no one use it.
- deepsleep bug from v0.6.9 fixed
- screen problem fixed (never happened on mine but need report from users)
- battery APM
v1.1
- black screen bug fixed
* CM is not supported. sorry.
** OTG stuff still untested. the driver and NTFS modules required is inside it but I don't have the equipment to test it.
Click to expand...
Click to collapse
IMPORTANT STUFF: INCOMPATIBILITY ISSUE REPORT
# DXLF deodexed ROM (reported count: 1)
reason : error due to tweak inside it. already fixed.
please report here if you find my kernel doesn't boot. specify your system in details like : the rom, tweaks, a2sd/non a2sd, kernel version. I'm trying my best to make this kernel compatible with all rom (except CM). all kernel kernel here is already tested in my device before I uploaded it. however, my work might not perfect yet so that it might won't boot in several ROM.
Click to expand...
Click to collapse
kernel source link: http://www.mediafire.com/?bgh79kbcof9jctf (it only contain the modified files. you need to download the whole source code from samsung at opensource.samsung.com. I'm using update 2 for european region).
Finally
BTW Freq,Governors,IO working?
Will test now
Edit : Sio not included, noticed Speed in booting, nice Kernel, expecting more, but not too much..LOL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its actually already uploaded several days ago (lol)
yeah finally
this not support dualboot it mean support a2sd, right ?
reserved..
Sent from my GT-S5360 using xda premium
@ron: why don't you try to build your kernel. you already on linux, don't you?
kurotsugi said:
@ron: why don't you try to build your kernel. you already on linux, don't you?
Click to expand...
Click to collapse
yes, i was on ubuntu 12.04, but i recently formatted my PC to Windows since i need it for school for my class presentations, i have a lot of work and i also need it for my part time job, so basically ubuntu was eating space, so switched to windows for a while, will be going back to ubuntu next year after graduation:highfive:
Noticed that frequencies 416 is rarely used
from 312 it jumps to 624 and rarely on 416..observation only, will test more
yup...416 is tend to not stable and it easily jumped out to 624. thats a bug from 4 freq mode using 0x0d. it can solved but we should underclock it too 104. its not a good option for me.
Wow downloading!!!!!
Sent from my GT-S5360 using xda premium
@ kuro, does it supports A2SD? nice kernel buddy. :good::good:
Ha! finally..
Great job my friend.
sent while doin' some burnouts
Benchmark for 416 MHz? How did you manage to fix the incapability of the CPU to reach that frequency?
kurotsugi said:
this is my compiled kernel, builded from samsung source code. please don't expect something wonderfull from this kernel since its only my kernel for my daily usage.
feature:
1. init.d script support
2. Advance Power Management enabled
3. built in droidwal support and bacem tweak
4. 4 freq
5. a few more gov and io sched
how to: flash the file via CWM.
credits:
1. irfanbagus for the patch and bacem tweak
2. savie for the help for 4 freq
3. marcotoo for the nice discussion about kernel on his thread
4. harish for the tools
5. edoko, tegrak, for source code
6. last but not least you...for support and nice development atmosphere here. keep follow the rules guys.
PS: please don't ask anything about CWM. I prefer to never put it on my kernel.
Click to expand...
Click to collapse
Reserved master...
Sent from my GT-S5360 using xda app-developers app
@marco: that freq isn't fixed yet. the benchmark and bogoMIPS score tend to give unstable value between 416 and 624. I think the freq for 0x0d isn't 416. it might a lil bit higher than it.
You could try 520…
Awesome. Flashing right away. Kuros stuff is always awesome. Was expecting this kernel. Thanks man
@marco: yup...I'll try that later. now I'm stil experimenting with something else.
@hitme: this kernel only give some basic stuff. it can't be compared to maroc's, repencis's, savie's or marco's kernel.
kurotsugi said:
@hitme: this kernel only give some basic stuff. it can't be compared to maroc's, repencis's, savie's or marco's kernel.
Click to expand...
Click to collapse
Thats exactly what I want. I dont use a2sd/swap and dont like ext4 auto mount. Was using rev54 savies till now as it has the exact one. Used rev 60 v2 for some time(it had ext4, inbuilt CWM etc) but it was draining battery some what since it got ext4 and inbuilt CWM etc. I need a kernel which is light, fast, battery saving and I only want droidwall. So this one exactly suits me
As far as CWM is concerned, as we can flash the same with just two clicks why so much rush to integrate to kernel? Its best not included imo
this kernel is already support swap and ext4 partition. I never used it but I think it will be usefull for someone who might want to use it. I'm still testing several stuff with the gov here and io sched here. got some interesting gov but it doesn't work at this moment. I'll upload it when I finished with this one.
EDIT: this kernel was my last stable kernel built. I can't clearly remember all stuff inside it. can you tell me the govs inside it?
Hmm then this isn't a basic kernel just flashed it and looks good. I'll give my detailed report later
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS KERNEL IS ONLY FOR AOSP/CM BASED ROMS
(= NOT COMPATIBLE WITH SONY FIRMWARES)
All the kernel features are controllable through Androguide.fr's Pimp My Z1 app, (thread here).
Features
Sound Control: Faux123's GPL Sound Control 3
Color Calibration Control: LCD_KCAL interface ported to the Z1 by @DooMLoRD, gives full control over the RGB channels of the display
GPU OC: 200MHz / 320MHz / 389MHz / 487.5MHz / 533MHz / 600MHz frequency scaling steps
CPU OC: up to 2.26GHz
CPU Voltage Control: use TricksterMod for the moment
Intelliplug: Faux123's latest intelliplug hotplugging driver with eco mode (v5.0)
MPDecision: showp1984's open-source & customizable msm_mpdecision hotplugging driver
Dynamic Fsync: Faux123's Dynamic File Sync v1.5
PowerSuspend: Faux123's power_suspend driver (replacing early_suspend)
Snake Charmer: Faux123's msm_cpufreq_limit CPU frequency limiter driver
Fast Charge: Faux123's fast_charge driver, allowing to set the amperage of the charger or USB port your device is plugged-in to
CPU Boost: Faux123's CPU Input Boost module (will soon add controls for it in Pimp My Z1)
GPU Wake-on-touch: allows touch events to wake the GPU if it was previously in slumber
KSM: Kernel Same-page Merging enabled
F2FS Support: Samsung's F2FS nand-optimized file system support
exFAT Support: Samsung's open-source exFAT driver
zRam Support: support for zRam memory compression
CPUPower: Linaro's cpupower PM driver
Async Fsync: Asynchronous file sync
MSM_Sleeper: Support for setting the max CPU frequency when screen is off through sysfs
Kernel mode NEON: NEON-accelerated XOR framework & support for NEON instructions in kernel mode
Overall Stats: CPU overall stats on a per-core basis
Compression: XZ Compressed & LZ4 compression algorithm support
Sched MC: Multi-Core Power Savings support
Sched SMT: Multi-Thread Power Savings support
Arch_Power: arch-specific power sched features enabled
Workqueue: backported from kernel 3.7, allows CPU hotplug to keep idle workers (learn more)
Toolchain: Built with Linaro GCC 4.9.2 toolchain from 14.04 release
Optimizations: Built with -O2 and many optimization flags
Kexec-hardboot ?: attempted to port @Tassadar's kexec-hardboot patches from the nexus 5, needs testing and confirmation that it works
Additional Governors:
ntellidemand
Intelliactive
Pegasusq
Nightmare
Hyper
Alucard
InteractiveX2
SmartassV2
Lagfree
Wheatley
Lionheart
Badass
Additional I/O Schedulers:
SIO (SImple Ondemand)
FIOPS (Fair Input/Output Per Second)
BFQ (Budget Fair Queueing)
VR
Additional TCP Congestion Algorithms:
BIC
Westwood
HSTCP
Hybla
HTCP
Vegas
Veno
Scalable
LP
YeAH
Illinois
Click to expand...
Click to collapse
Download
Release date: 2014-10-11Full-Pimped-Kernel-2014-10-12-amami.zip - 9.9 MB
Light-Pimped-Kernel-2014-10-12-amami.zip - 9.7 MB
All builds (current/previous) can be found here: Pimped Kernel Folder
These are test builds, and always tested prior to release, please provide feedback if you flash it
Click to expand...
Click to collapse
Disclaimer
Code:
# Neither me or any contributors to this kernel can nor will be held
# responsible for any damage or any kind of problem related to its use.
# You are using this piece of software AT YOUR OWN RISK.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
Sources
The sources are obviously covered by the General Public License, and are available on Androguide.fr's github at: https://github.com/PimpedKernel/android_kernel_sony_msm8974
Also you can find my fork of the sources (Light/Full) with the modifications I made to compile it for Xperia Z1 Compact at: https://github.com/RepoB/android_kernel_sony_msm8974-pimped
Click to expand...
Click to collapse
Credits
Thanks to Androguide.fr he made the whole kernel I just compiled it for Amami
Thanks to oshmoun he helped me a lot to get this kernel to be as great as it is now
Thanks to faux123 for all his contributions to the android kernel community, many of which are implemented here
Thanks to showp1984 for his msm_mpdecision hotplug driver
Thanks to DooMLoRD for all the cherry-picked features from his DoomKernel
Thanks to krabapel2458 for the inital port from DoomKernel of features like GPU OC, some governors and more.
And of course, thanks to FreeXperia and Kali- in particular, for the device bring-up
Click to expand...
Click to collapse
XDA:DevDB Information
PimpedKernel Kitkat - Amami, Kernel for the Sony Xperia Z1 Compact
Contributors
OmarEinea, oshmoun
Source Code: https://github.com/RepoB/android_kernel_sony_msm8974-pimped
Kernel Special Features: Sound Control, GPU OC, Intelliplug, PowerSuspend, Dynamic Fsync, exFAT, F2FS, KSM, Intellidemand, Intelliactive, SmartassV2, InteractiveX2, Lionheart, Wheatley, Badass, Lagfree, BFQ, SIO, FIOPS, Westwood, Hybla, HSTCP, HTCP, Veno, Illinois, LP, BIC...
Version Information
Status: Testing
Created 2014-05-30
Last Updated 2014-11-15
Changelo & To do list & Bugs:
Bugs
Please guys, this is a test build, it was tested on Carbon ROM and Resurrection Remix ROM,
but it has some stability issues, and you might face lots of bugs and software reboots while using it.
Will try to improve it, please give a nice feedback, and I'll enlist all bugs here.
Click to expand...
Click to collapse
To do list
Add dual recovery support [No recoveries included anymore]
Fix reboot to recovery in some ROMs [Done, I think!]
Enable tap to wake feature [Impossible]
Click to expand...
Click to collapse
Changelog
2014-10-11:
Fixed wlan, it should be working now!
2014-10-11:
Updated kernel with latest changes from CM & Pimped kernel
2014-05-30:
Initial release
Click to expand...
Click to collapse
ScreenShots
First here!!!! Great to see!!!! Already trying.
GPU OC in future update ?
omegastarr said:
GPU OC in future update ?
Click to expand...
Click to collapse
Maybe if I figure out why it isn't working, I mean GPU OC code is implemented in the kernel, but it's not working for some reason,
will see what I can do.
omarainea said:
...
Click to expand...
Click to collapse
Yay! Finally! Cyanogen, here I come!
TY, mate. Was waiting for this for a loooooooong time. Good job pulling it off =)
---------- Post added at 01:03 AM ---------- Previous post was at 01:02 AM ----------
omarainea said:
Maybe if I figure out why it isn't working, I mean GPU OC code is implemented in the kernel, but it's not working for some reason,
will see what I can do.
Click to expand...
Click to collapse
I'm not even sure that GPU OC works properly on Z1...
TheQwertiest said:
I'm not even sure that GPU OC works properly on Z1...
Click to expand...
Click to collapse
I'm not sure about that ether, but the weird thing is that even though the same code (as the one used for Z1) is included here,
you can't even switch GPU to more that 450MHz, I mean the GPU script has all 487.5MHz / 533MHz / 600MHz OCs but they aren't showing up
Tried it with pimp my z1
Didn't work. Specifically it crashes when any setting is changed from stock.
I'm on slimkat.
Running it on the latest CM11 nightly (31/5) and the phone momentarily freezes very shortly after boot before rebooting. Can't say what triggers it because it happens regardless of what I do.
Great work mate. The most important for me is the support for undervolting. Is it included in the kernel?
idimitro said:
Great work mate. The most important for me is the support for undervolting. Is it included in the kernel?
Click to expand...
Click to collapse
Yes it is, but you might find it buggy (for now)
@omarainea I have tested (not so much but anyway...) with carbon and resurection roms. RR install was cleaner I hadn´t utilized kernel settings beforkrnel install. Kernel works good, no reboots have changed a lot of settings without problems, on carbon phone reboots all the time but I had changed a lot of settings before kernel install. Later I will try more clean carbon installation with pimpkernel, for now I´m going with RR rom. Great work, thanks!
funiewski said:
@omarainea I have tested (not so much but anyway...) with carbon and resurection roms. RR install was cleaner I hadn´t utilized kernel settings beforkrnel install. Kernel works good, no reboots have changed a lot of settings without problems, on carbon phone reboots all the time but I had changed a lot of settings before kernel install. Later I will try more clean carbon installation with pimpkernel, for now I´m going with RR rom. Great work, thanks!
Click to expand...
Click to collapse
Can you outline the steps you took? I can't get it to work on mine both with Carbon and Slim.
ctap001 said:
Can you outline the steps you took? I can't get it to work on mine both with Carbon and Slim.
Click to expand...
Click to collapse
just did a clean Carbon or RR install, then boot to system, then reboot to recovery and flash the kernel without any wipes, reboot.
omarainea said:
just did a clean Carbon or RR install, then boot to system, then reboot to recovery and flash the kernel without any wipes, reboot.
Click to expand...
Click to collapse
By clean you mean doing a factory reset prior?
And would it matter if I wipe partition and dalvik after flashing the kernel?
Also have you tried it with ART? My crashes only happen when I was on Dalvik
ctap001 said:
By clean you mean doing a factory reset prior?
And would it matter if I wipe partition and dalvik after flashing the kernel?
Also have you tried it with ART? My crashes only happen when I was on Dalvik
Click to expand...
Click to collapse
By clean install I mean factory reset and format /system prior, and it didn't matter to me whether I wipe dalvik after flashing the kernel or not.
also, now that you're mentioning it, I haven't tried ART on Pimped kernel yet (just Dalvik).
omarainea said:
By clean install I mean factory reset and format /system prior, and it didn't matter to me whether I wipe dalvik after flashing the kernel or not.
also, now that you're mentioning it, I haven't tried ART on Pimped kernel yet (just Dalvik).
Click to expand...
Click to collapse
That step is always included in ROM instructions so I'm quite sure I did that. At first I thought the reboots were being caused by undervolting but even when I just changed the read-ahead in I/o settings I still get random crashes.
Hello!
Does the work kernel in the kit SlimRom? If so. I would like to test it!
thx
Sent from my D5503 using XDA Premium 4 mobile app
diabolica said:
Hello!
Does the work kernel in the kit SlimRom? If so. I would like to test it!
thx
Sent from my D5503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope kit SlimRom is Sony based not cm-based ROM, this kernel is for cm-based ROMs.
if you're looking for a custom kernel for kit SlimRom you can try DooMKernel, I'll release v19 soon, so wait for it and try it
Hey guys Im making a new kernel for this device. If you want any specific feature then comment below
Till now I have added:
Overclocked bus
Battery saving tweaks
Frandom
Fastchg
Makefile tweaks for cortex a7
Linaro toolchain support
Neon mode
Touchscreen mods-still in wip
The kernel should be released by xmas
thank you
Thank you
Waiting for it
Feature request.
Add a new TWRP with new features
hell_lock said:
Hey guys Im making a new kernel for this device. If you want any specific feature then comment below
Till now I have added:
Overclocked bus
Battery saving tweaks
Frandom
Fastchg
Makefile tweaks for cortex a7
Linaro toolchain support
Neon mode
Touchscreen mods-still in wip
The kernel should be released by xmas
Click to expand...
Click to collapse
are you making kernel for d2212,d2202,d2203
well try to make for all.
what about fixing clockworkmod text won,t fit screen bug.
android-vinay said:
are you making kernel for d2212,d2202,d2203
well try to make for all.
what about fixing clockworkmod text won,t fit screen bug.
Click to expand...
Click to collapse
I cant fiddle with recovery because it is not made by me and any changes I make in it soft bricks my phone..
So I am limited to only kernel based mods.
Will installing your kernel will remove recovery.
I don,t wanna lose my recovery for this kernel please make twrp or cwm for it.
Sent from my D2212 using XDA Free mobile app
hell_lock said:
Hey guys Im making a new kernel for this device. If you want any specific feature then comment below
Till now I have added:
Overclocked bus
Battery saving tweaks
Frandom
Fastchg
Makefile tweaks for cortex a7
Linaro toolchain support
Neon mode
Touchscreen mods-still in wip
The kernel should be released by xmas
Click to expand...
Click to collapse
feature required
cpu overclock to 1.6 ghz
gpu oveclock from 450mhz to any stable(safe) clock >if thare is rick of burning gpu then don,t oc it.
A custom kernel for stock ROM would be awesome
hell_lock said:
Hey guys Im making a new kernel for this device. If you want any specific feature then comment below
Till now I have added:
Overclocked bus
Battery saving tweaks
Frandom
Fastchg
Makefile tweaks for cortex a7
Linaro toolchain support
Neon mode
Touchscreen mods-still in wip
The kernel should be released by xmas
Click to expand...
Click to collapse
ok @hell_lock / infinityshooter you must make kernel for d2212 so if you make kernel for d2212 it will also work for d2202as it heppend before in rooting method. and you will Target multiply devices.
@hell_lock you would like to listen that i flashed d2202 boot.img on my d2212 and it worked perfectly and also both sim,s are working this mean d2212 and d2202 both have same kernel.
hell_lock said:
Hey guys Im making a new kernel for this device. If you want any specific feature then comment below
Till now I have added:
Overclocked bus
Battery saving tweaks
Frandom
Fastchg
Makefile tweaks for cortex a7
Linaro toolchain support
Neon mode
Touchscreen mods-still in wip
The kernel should be released by xmas
Click to expand...
Click to collapse
ADD THIS Swap enable/remove Crappy govs/add Smartass2/tweaks for performance and battery/smoothass/lagfree/Deep sleep/frequencies/uV/Update all drivers
My kernel release might get delayed due to my exams. So no eta.
But I promise you, it WILL be released.
vinay said:
ADD THIS Swap enable/remove Crappy govs/add Smartass2/tweaks for performance and battery/smoothass/lagfree/Deep sleep/frequencies/uV/Update all drivers
Click to expand...
Click to collapse
Test this please: http://d-h.st/v06R
Only for d2212 and d2202 users.
Test for:
Stability
Sound in headphone and mic
govs and io
fastcharge
battery life
performance
intelli-plug(enter the code below and use the phone)
Code:
stop mpdecision
echo "1" > /sys/module/intelli_plug/parameters/intelli_plug_active
This is not an official release. Not even close to it. Lets call it beta. I have to work more on it. Bug reports are welcome.
hell_lock said:
Test this please: http://d-h.st/v06R
Only for d2212 and d2202 users.
Test for:
Stability
Sound in headphone and mic
govs and io
fastcharge
battery life
performance
intelli-plug(enter the code below and use the phone)
Code:
stop mpdecision
echo "1" > /sys/module/intelli_plug/parameters/intelli_plug_active
This is not an official release. Not even close to it. Lets call it beta. I have to work more on it. Bug reports are welcome.
Click to expand...
Click to collapse
Here is what happend to my xperia e3 d2212
phone booted correctly.
gov => intellidemand cause my phone to reboot
gov => intelliactive Working
gov =>wheatley Working
gov =>ondemandplus Working
headphones => working
Speaker => working
mic => working
performance => get a bit better on inteliactive gov and a bit laggy gaming on ondemand plus
what is intelli-plug code and how to were to use.
vinay said:
Here is what happend to my xperia e3 d2212
phone booted correctly.
gov => intellidemand cause my phone to reboot
gov => intelliactive Working
gov =>wheatley Working
gov =>ondemandplus Working
headphones => working
Speaker => working
mic => working
performance => get a bit better on inteliactive gov and a bit laggy gaming on ondemand plus
what is intelli-plug code and how to were to use.
Click to expand...
Click to collapse
Intelli plug is mainly for battery saving and frequency control.
You have to enter those commands in terminal emulator or adb shell.
I'm at work now but i'll test this pre-kernel-release so soon as possible!
@hell_lock Can i use Trickster Mod app to exchange mpdecision to intelliplug?
2212
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
adrianocolvero said:
2212
Click to expand...
Click to collapse
Please keep it on and test it for a day..
Thanks to all the testers.
Sent from my D2202 using XDA Free mobile app
hell_lock said:
Please keep it on and test it for a day..
Thanks to all the testers.
Sent from my D2202 using XDA Free mobile app
Click to expand...
Click to collapse
Ok, i will review it with a bit more days of use.
hell_lock said:
Intelli plug is mainly for battery saving and frequency control.
You have to enter those commands in terminal emulator or adb shell.
Click to expand...
Click to collapse
I don't found any improvement in performance and battery ? after one day of use. But also I don't have any restart or other problems with this kernel. It feels like stock.
Sent from my D2212 using XDA Free mobile app
I've tested your kernel and all i can say is who this kernel is very stable for now.
No major improvements, all working good, using the intelliplug over the mpdecision i feel a little better battery duration but maybe placebo.
Thanks for your efforts and don't give up your work, we all are waiting for this!
I am not sure it's caused by kernel or not but my battery is discharging faster than before.
Sent from my D2212 using XDA Free mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
UBERTC 6.0 Toolchain [latest update]
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
Sound:
- Sound control
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Supported Variants:
H830
H850
Download Link CrazySuperKernel [H830] [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=141303
Download Link CrazySuperKernel [H850] [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=141296
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the LG G5
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-G5
Kernel Special Features: check the feature list
Version Information
Status: Testing
Created 2017-01-02
Last Updated 2017-01-04
FAQ
Recommended app : CrazySuperKernel Adiutor
changelogs
v1.0/02-01-17
- initial release
v2.0/04-01-17
- update toolchain to UBERTC 6.0
- sound control
- input boost
- frandom
- msm thermal
- many improvments under the hood
v3.0/04-01-17
- many improvments under the hood
- some fixes
For users and devs!!
All my kernels are based on cyanogenmod/lineageos source ,if someone who believes" i stoled their source" i have video captures and anyone who believes something just report me and i will have the last laugh .every tweak/mod/feature i used i edited/tweaked on my own and anyone with problem just stay away. My sources are free for anyone and can be used(i saw some ppl use them already)i don't care like other devs and i am happy and proud if someone use my work(the words" i work many hours on that project" the best repeatable words(many devs without the recognized tag and not with many thanks,they have worked for many hours/days/months and they don't cry and fight other devs )if for some devs their source are so much rare and hardworked just keep them privet(their work include their name so no problem ...we are not here for the fame ...we just want to improve the devices to make them better and not to fight with each other...
Why i am telling you all these?!
I have had many kernels unreleased from fights...i will continue to new clean projects based on lineageos and i will not care much with my source to wait many days to upload them with all the history of them because 2-3 "devs" they believe i used or edited their source...i am not a popular dev but you can't believe and no one knows how many days without sleep and hours of hardwork i have done, to do all this(and many not release source/work, much more than other devs...
reserve1
reserve2
This kernel is for cm14.1 and roms based on cm. So I guess rebased LineAge OS is also supported?!? OC and UV works without loosing stability?
Does this work for Fulmics ROM(based on v20a H850)?
666misanthrop666 said:
This kernel is for cm14.1 and roms based on cm. So I guess rebased LineAge OS is also supported?!? OC and UV works without loosing stability?
Click to expand...
Click to collapse
It is for LOS yeh,i ll add more features soon,i added just the most important and stable features.
obol2 said:
Does this work for Fulmics ROM(based on v20a H850)?
Click to expand...
Click to collapse
Only for cm/los based roms m8
Any feedback how it work the first build?
First build working amazing I. H830 latest cm build thank you
Couple questions do we gotta use the included BusyBox as I prefer stericsons
And does this support drive droid ?
Dreamlogix said:
First build working amazing I. H830 latest cm build thank you
Couple questions do we gotta use the included BusyBox as I prefer stericsons
And does this support drive droid ?
Click to expand...
Click to collapse
Thx for feedback m8,you can use every busybox you want and i never used drive droid to test it.I ll add more features maybe tonight.
CrazyGamerGR said:
Thx for feedback m8,you can use every busybox you want and i never used drive droid to test it.I ll add more features maybe tonight.
Click to expand...
Click to collapse
I'll send the info here when I get home
Edit here it is
https://forum.xda-developers.com/showthread.php?t=2196707
Dreamlogix said:
I'll send the info here when I get home
Edit here it is
https://forum.xda-developers.com/showthread.php?t=2196707
Click to expand...
Click to collapse
Maybe it is included,you tried it if it work? I ll check it again in a few minutes.
It works very well. There are a couple things I've noticed though. Using the hotplug control, setting the number of cores does not stick. Also on CPU frequency maximum if you try to change core 2 or 3 the max shows 1593 MHz instead of the higher values of these cores. Also there is no GPU control. But overall it is very stable and have been using it since you released it. Looking forward to more features and thanks for your development.
T mobile h830.
jeffsga88 said:
It works very well. There are a couple things I've noticed though. Using the hotplug control, setting the number of cores does not stick. Also on CPU frequency maximum if you try to change core 2 or 3 the max shows 1593 MHz instead of the higher values of these cores. Also there is no GPU control. But overall it is very stable and have been using it since you released it. Looking forward to more features and thanks for your development.
T mobile h830.
Click to expand...
Click to collapse
Thx for feedback m8
@jeffsga88 You tried KernelAdiutor or just CSKAdiutor?
CrazyGamerGR said:
@jeffsga88 You tried KernelAdiutor or just CSKAdiutor?
Click to expand...
Click to collapse
CSKAuditir that's included in OP.
jeffsga88 said:
CSKAuditir that's included in OP.
Click to expand...
Click to collapse
Can you try plz if KA work better?
CrazyGamerGR said:
Can you try plz if KA work better?
Click to expand...
Click to collapse
Okay so using the regular kernel auditor setting CPU max for both the little and big core configuration works correctly (able to properly set max CPU speed). Also able to change GPU speed settings. But hotplugging option to change max cores not available in kernel auditor, so not sure that's fully implemented in your kernel yet? Also like your version of kernel auditor for screen settings where you can choose preset profiles. But overall the regular kernel auditor does seem to work better.
[Kernel][Mido][Oreo][P][Treble & Non-Treble][OC]eXtremeKernel V12 for Redmi Note 4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unleash The Power with the new eXtremeKernel V12
Afraid to install that high performance 3D Game because your device just won't take it ? ,Want to rock Asphalt Legends on Ultra Graphics? Got no time to charge your device on the run?
Or Maybe You Just Want to Embrace your Device Reborn. Behold!. "The eXtreme kernel" .. here to lift your desire for performance and battery beyond limits and measures.. and to the "eXtreme" you deserve more than" Stock ". you deserve "eXtreme" . unleash the true power of your device like never before, while you can. why live the stock life when u can go all the way "extreme!!".
-Latest Linux Version (3.18.124)
Based on LOS Kernel Source with applied 8.1 Changes
Upstreamed to Latest Linux Version (3.18.123)
Updated Wi-Fi driver to LA.UM.6.6.r1-09600-89xx.0
Compactible with Custom Roms (Treble/NonTreble)
Compiled with Google Toolchain
Reworked the whole kernel
Reworked OC
Auto Detect zip Treble and Not treble
CPU OC to 2.764 Mhz
CPU Underclock to 373 Mhz
Undervolt by -75 mV
Undervolt some regulators for better battery life
GPU OC to 1166 Mhz
Optimized the Msm-adreno-tz
DevFreq Optimizations
Optimized Audio Codec
Slimbus OC
Audio processor: Overclock to 12.228MHz!
Sound Control
Spectrum Support
KCAL color control
fsync on/off support
CRC-check on/off support
Tweaked Spectrum Profiles
Boeffla wakelock blocker
State Notiffer Driver
Intelli Thermal V3
PowerSuspend
Adreno Idler
Updated PowerSuspend Driver
State Notiffer Driver
LionHeart CPU Governor
Zzmoove CPU Governor
Impulse CPU Governor
Optimized Interactive Governor
and original ones
Anxiety IO Scheduler
Maple IO Scheduler
Fiops IO Scheduler
Optimized CFQ IO Sched
Optimized Deadline IO Sched
and original ones
Lot of TCP Algorithms (cubic,reno,bic,yeah,hybia...)
Vibration intensity control for qpnp-haptics interface
300 Hz Timer for best Battery and Performance
Included OC Damage and Voltage Protection
-F2FS Support
-Working IR Blaster
Added fsync on/off support
Added support for exfat and enabled ntfs.
Optimized and Upstreamed ZRAM
Optimized Boot Time
Optimized Deep Sleep
Optimized Opening Delay
Some Network Speed Tweaks
Incresed GPU power lvl to 20
Some essential patches that you can also find in Google kernels
and Lot of more small Optimizations
MOD EDIT: LINK REMOVED.
You can Donate with pressing Donate to Me Button or just VIsit this link
XDA:DevDB Information
[Kernel][Mido][Oreo][P][Treble & Non-Treble][OC]eXtremeKernel V11 for MI Redmi Note 4
Contributors
Alek Dev, Cheewaca, TheHitman
Source Code:
Version Information
Status: Stable
Current Stable Version: 12.0
Stable Release Date: 2018-09-30
Created 2018-09-30
Last Updated 2018-11-14
Reserved Post
1st! :laugh:
Awesome kernel
Best alternative to starkz kernel
Impressive spectrum profiles!
No need to tinker stuff, the spectrum profiles are great for each purpose. You can unleash the beast and saving battery on the same kernel! Great work, dev.
Great work sir :good:
woooow!!!!!, testing, installation no problem, great work
Gonna give it a try
Can I flash this custom kernel over the other custom kernel I'm using now?
zoel.fahmi said:
Gonna give it a try
Can I flash this custom kernel over the other custom kernel I'm using now?
Click to expand...
Click to collapse
based on my experience: no, u need to clean flash rom.
flash stock boot.img did not work, results saying "Encryption Failed, factory reset required"
justreybro said:
based on my experience: no, u need to clean flash rom.
flash stock boot.img did not work, results saying "Encryption Failed, factory reset required"
Click to expand...
Click to collapse
Oh damn. That stock boot.img flash always done the trick for me whenever I wanted to flash a new custom kernel. Guess I'm gonna pass this one then
Lovely stuff
greenys' said:
Oh damn. That stock boot.img flash always done the trick for me whenever I wanted to flash a new custom kernel. Guess I'm gonna pass this one then
Click to expand...
Click to collapse
idk about this version tho, just try it bro.
After facing "Encryption Failed" thing u can still flash boot.img afterwards. Try it won't hurt.
this high OC is no danger to the life of the device?
Thanks for this awsome kernel.. Install and working good on oreo LOS extended by alexey.
Can u please add an iptable/netfilter module on ur next released?
Thanks.
justreybro said:
Impressive spectrum profiles!
No need to tinker stuff, the spectrum profiles are great for each purpose. You can unleash the beast and saving battery on the same kernel! Great work, dev.
Click to expand...
Click to collapse
Which one to flash, oc or non oc?
huzefaonline said:
Which one to flash, oc or non oc?
Click to expand...
Click to collapse
I recommend the oc version, use spectrum battery profile as daily driver and spectrum gaming profile for heavy task like gaming.
If you want to unlock mido's potential and you do gaming but still can save battery while needed, go OC.
If you don't need extra power, go non OC.
But it all depends on you.
justreybro said:
I recommend the oc version, use spectrum battery profile as daily driver and spectrum gaming profile for heavy task like gaming.
If you want to unlock mido's potential and you do gaming but still can save battery while needed, go OC.
If you don't need extra power, go non OC.
But it all depends on you.
Click to expand...
Click to collapse
Ok. I don't do gaimg and don't need power but will still try the oc version with spectrum battery profile. If it doesn't work well then will go non oc version
Nice bro
justreybro said:
based on my experience: no, u need to clean flash rom.
flash stock boot.img did not work, results saying "Encryption Failed, factory reset required"
Click to expand...
Click to collapse
OK, so that's mean I have to wipe everything first
Then install cusrom followed by GApps after that custom kernel, right?
---------- Post added at 01:37 AM ---------- Previous post was at 01:34 AM ----------
lumin25 said:
this high OC is no danger to the life of the device?
Click to expand...
Click to collapse
It's always at risk, especially battery life
My advice is when you're using this kernel especially the OC version (gaming)
Install external cooling device, it's quite cheap
great work, is it possible to correct the brightness control buttons?