Need help rooting - Moto G Q&A, Help & Troubleshooting

hey there, i have spent trying to root my moto g XT1032 but failed trying to use superboot method and modified recovery. I dint know whats wrong. i have an unlocked bootloader and i have latest drivers.is there any other way to root ? plz help

bublz654 said:
hey there, i have spent trying to root my moto g XT1032 but failed trying to use superboot method and modified recovery. I dint know whats wrong. i have an unlocked bootloader and i have latest drivers.is there any other way to root ? plz help
Click to expand...
Click to collapse
I have CWM installed as a recovery and this works fine - im guessing you do too.
You need the 'Superuser' zip file put onto your moto g. You can just connect the moto g to your pc and send it to it this way. No need to push it with CMD or anything.
Get a file explorer from the play store and just check that the 'superuser' zip file has been copied across fine to your moto g - it should have.
Then boot into bootloader and choose recovery and CWM Recovery should be there on screen - choose to install zip from sd card and then you will have the superuser zip to install.
Install this and then reboot and you should be up and running.
Not the best guide sorry but its got the info you need!
I used;
http://www.reddit.com/r/MotoG/comments/22mimr/the_guide_to_rooting_the_motog_with_a_howto/
But at step 13 it didnt work for me so i manually found the superuser zip file and used my method to install from CWM Recovery
Here is the location of the Superuser zip ;
http://www.modaco.com/topic/366771-root-your-moto-g-option-1-superboot/
Hope this helps - all the best

wolverine73 said:
I have CWM installed as a recovery and this works fine - im guessing you do too.
You need the 'Superuser' zip file put onto your moto g. You can just connect the moto g to your pc and send it to it this way. No need to push it with CMD or anything.
Get a file explorer from the play store and just check that the 'superuser' zip file has been copied across fine to your moto g - it should have.
Then boot into bootloader and choose recovery and CWM Recovery should be there on screen - choose to install zip from sd card and then you will have the superuser zip to install.
Install this and then reboot and you should be up and running.
Not the best guide sorry but its got the info you need!
I used;
http://www.reddit.com/r/MotoG/comments/22mimr/the_guide_to_rooting_the_motog_with_a_howto/
But at step 13 it didnt work for me so i manually found the superuser zip file and used my method to install from CWM Recovery
Here is the location of the Superuser zip ;
http://www.modaco.com/topic/366771-root-your-moto-g-option-1-superboot/
Hope this helps - all the best
Click to expand...
Click to collapse
when I select recovery from boot loader menu it shows the "M" , then black screen, then goes to normal boot again
Sent from my XT1032 using Tapatalk

and I have superuser.zip has been copied and not in any folder
Sent from my XT1032 using Tapatalk

wolverine73 said:
http://www.reddit.com/r/MotoG/comments/22mimr/the_guide_to_rooting_the_motog_with_a_howto/
Click to expand...
Click to collapse
how to tell if my device is GPE or not
Sent from my XT1032 using Tapatalk

bublz654 said:
when I select recovery from boot loader menu it shows the "M" , then black screen, then goes to normal boot again
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Flash recovery(latest) again through adb n install supersu through adb sideload

abhi0502 said:
Flash recovery(latest) again through adb n install supersu through adb sideload
Click to expand...
Click to collapse
im noob at adb so I'm a bit confused on how to install recovery through adb and install SuperSU through adb sideload.
Sent from my XT1032 using Tapatalk

bublz654 said:
im noob at adb so I'm a bit confused on how to install recovery through adb and install SuperSU through adb sideload.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Perhaps follow the guide that I linked you too, it sounds like you haven't got CWM Recovery installed.
I'm certainly no expert so perhaps wait for help off of the more knowledgeable guys here if you don't want to follow my way
Not sure how to tell which device is which (GPE) but I just went with the guide that the guy uses .......I used the non gpe one like the guy did

wolverine73 said:
Perhaps follow the guide that I linked you too, it sounds like you haven't got CWM Recovery installed.
I'm certainly no expert so perhaps wait for help off of the more knowledgeable guys here if you don't want to follow my way
Click to expand...
Click to collapse
I don't remember installing twrp or cwmr. n I don't know how to install it through adb either
Sent from my XT1032 using Tapatalk

bublz654 said:
im noob at adb so I'm a bit confused on how to install recovery through adb and install SuperSU through adb sideload.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
If u have already unlocked bootloader copy recovery n supersu zip file where adb files n fastboot r located
1-open cmd
2-type adb devices (u will get daemon successfully like that)
3-type fastboot flash recovery (recovery file name). zip
4-open recovery go to adb sideload n type adb sideload (supersu file name). zip
5-restart systsm

bublz654 said:
I don't remember installing twrp or cwmr. n I don't know how to install it through adb either
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
if you have an unlocked bootloader than go to developer options by tapping on build number 5 times which is in about and then turn on usb debugging and then enter fastboot on your phone and connect the usb cable. Download the adb drivers and place the cwm recorvery.img in that folder, then hold shift and right click on the folder you downloaded (adb drivers) and then type this in "fastboot flash recovery NAME OF RECOVERY.IMG and enter, it would flash the recovery, but dont exit the bootloader just yet, enter recovery by clicking volume down and volume up to enter and then reboot.

abhi0502 said:
If u have already unlocked bootloader copy recovery n supersu zip file where adb files n fastboot r located
1-open cmd
2-type adb devices (u will get daemon successfully like that)
3-type fastboot flash recovery (recovery file name). zip
4-open recovery go to adb sideload n type adb sideload (supersu file name). zip
5-restart systsm
Click to expand...
Click to collapse
on step 5 does it say adb sideload in cwm ?
Sent from my XT1032 using Tapatalk

https://www.youtube.com/watch?v=GrDYGmgbQEw&feature=youtube_gdata_player will I follow this since it shows how to install cwm and root
Sent from my XT1032 using Tapatalk

bublz654 said:
on step 5 does it say adb sideload in cwm ?
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Yeah cwm or twrp whichever recovery u r using asb sideload option is there

abhi0502 said:
Yeah cwm or twrp whichever recovery u r using asb sideload option is there
Click to expand...
Click to collapse
OK. will I do a nandroid backup before I flash SuperSU.zip or after ?
Sent from my XT1032 using Tapatalk

bublz654 said:
https://www.youtube.com/watch?v=GrDYGmgbQEw&feature=youtube_gdata_player will I follow this since it shows how to install cwm and root
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Yeah u can follow that video but first download cwm recovery from development thread in xda dont download recovery given by rootjunky
---------- Post added at 03:35 AM ---------- Previous post was at 03:33 AM ----------
bublz654 said:
OK. will I do a nandroid backup before I flash SuperSU.zip or after ?
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
U can backup only after installing recovery (u will get backup option in recovery)

OK so download cwm from here http://forum.xda-developers.com/showthread.php?t=2563599 ? then do nandroid. then reboot then flash SuperSU as described in video? is there something I'm missing or I'm OK
Sent from my XT1032 using Tapatalk

bublz654 said:
OK so download cwm from here http://forum.xda-developers.com/showthread.php?t=2563599 ? then do nandroid. then reboot then flash SuperSU as described in video? is there something I'm missing or I'm OK
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
No follow d video first install recovery(from above link) supersu then u can do nandroid backup

abhi0502 said:
No follow d video first install recovery supersu then u can do nandroid backup
Click to expand...
Click to collapse
I will try tomorrow. nearly 11:15 pm now. I will let you know tomorrow but now goodnight?
Sent from my XT1032 using Tapatalk

it keeps saying cannot open file when i try to flash recovery. plz help

Related

CWM is gone?! Yes i reflashed.

So um a funny thing happened, i was in rom manager and reflashed Cwm over again. Because i had a custom themed Cwm. Now when i try booting inti recovery it just sends me to the fastloader screen and says recovery img not found!! I tried reflashing via rom manager 3 times already......CWM just wont come back i needed it to flash roms! Im currently on ns collab/franco. I have no clue whats wrong.
Sent from my Nexus S using xda premium
Do u have adb and fastboot set up?
If so download cwm 5.0.20 rename it to recovery
Navigate to fastboot flash recovery recovery.img
sent from my NeXus S
Have you tried to flash with fastboot flash recovery name.img?
Can you guys tell me how to do it via terminal emulator? I dont have adb setup and dont use it alot.
Sent from my Nexus S using xda premium
This might help you
http://forum.xda-developers.com/showthread.php?t=1007782
briggl said:
This might help you
http://forum.xda-developers.com/showthread.php?t=1007782
Click to expand...
Click to collapse
Yeah thats the one! i used that when rooting and flashing my phone! thanks for linking it. Im downloading CWM 5.0.20 the newest one and will use that guide to push it to the phone
it should be fine, i will try and find out.
Make sure u rename it to recovery not recovery(name).img
sent from my NeXus S
Ok problem - i tried flashing via terminal emulator and now when i try to reboot into CWM it stays on the Google Screen. any ideas guys?
i did it the exact same way it said on here, flashing via terminal, and i also renamed it to recovery.img
http://forum.xda-developers.com/showthread.php?t=1242901
Never mind guys,got it working! after the via terminal, i just reflashed on Rom manager. Its ok now, i can get into CWM. Any idea why this would happen in the first place though? its odd.
you have to edit the official OTA zip file and remove it from there I'm working on it

[Q] Unlocked bootloader and root 2.20, but now can't install twprp recovery

Hey Guys So i was able to successfully unload my bootloader and root my phone via 2.20 root temp method. Now i've run into a wall where I seem to be following the directions, but can't seem to get it to work.
So after my phone was unlocked etc after the whole token thingy... (Sorry this is my first time since 3-4 years ago that i have rooted.. Last phone was a Droid X so excuse my ignorance).... Anyhow so my phone got reset and all and booted back and everything was fine and working.. Now according to the thread in order to flash a ROM of my choice i need to install some sort of Recovery tool. The instructions say to install TWRP-2.3.1.0-evita.img. I have put the .img on the same folder c:android that i have created where i have the adb, fastboot files. I open up a command prompt window and run the command "fastboot flash recovery twrp-2.3.1.0-evita.img and it says "waiting for device" and get's stuck there and nothing happens.
According to the post it is supposed to install it and restart my phone automatically, however nothing happens. I am afraid if i reboot my phone and try again that my temp root will go away and will have to redo-everything all over again. Additionally I have tried the market place method where you download "Goomanager" and install the twrp img via menu>openrecoveryscript and choose to download, however i get an error when attempting to download. Can someone point me in the right direction. And will i lose temp root if i reboot my phone?
"Hey guys i just notice i did not run the "adb fastboot" command to tell my phone to reboot first prioer to trying to flash the twrip image. Sorry"
Did you get superuser and busy box from the playstore?
Sent from my One X using xda premium
subarudroid said:
Did you get superuser and busy box from the playstore?
Sent from my One X using xda premium
Click to expand...
Click to collapse
No i did not download those apps... Do i need to download them? Anything special i need to know?
movadoevo8 said:
No i did not download those apps... Do i need to download them? Anything special i need to know?
Click to expand...
Click to collapse
I just downloaded superuser and busybox. Also i downloaded root checker and when i click on check root it says my phone is NOT PROPERLY ROOTER. Can this be because of how HTC ONE X gets temp rooted and this app doesn't work properly? How can i check for sure if i'm rooted? I mean i can get into TWRP recovery and everything with no issues. Thanks.
I believe that because you did not download superuser before reboot. I think you lost root. Might want to try again.
Sent from my One X using xda premium
So after i Ran the run.bat and did the entire cid and then token thingy from HTC site and unlocked my bootloader the phone rebooted on it's own.
I believe i need to install superuser via recovery or flash a rom first then install not sure.. the way the dev wrote this phrase is confusing to me.. Check it out...
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I mean every step form 1-9 all went successfully. Can you provide me with some tips ?
Oh OK. I get it. Give a sec I'll post what you need.
Sent from my One X using xda premium
Thanks for helping me out, much appreciated. Also look's like i will need to find the superuser file somewhere online. I believe it needs to be inside a .zip. If i need that can you please provide that info on the instructions. Thank you so much for helping me.
http://forum.xda-developers.com/attachment.php?attachmentid=1203381&d=1342493450
download this. Then in fastboot command prompt type. fastboot flash recovery (recoveryfilename.img)
(is the image file name you download)
subarudroid said:
http://forum.xda-developers.com/attachment.php?attachmentid=1203381&d=1342493450
download this. Then in fastboot command prompt type. fastboot flash recovery (recoveryfilename.img)
(is the image file name you download)
Click to expand...
Click to collapse
Alright thanks let me give it a try.
then after you have recovery installed. Download this http://forum.xda-developers.com/attachment.php?attachmentid=1195050&d=1342168095
ANd flash this zip in recovery
subarudroid said:
then after you have recovery installed. Download this http://forum.xda-developers.com/attachment.php?attachmentid=1195050&d=1342168095
ANd flash this zip in recovery
Click to expand...
Click to collapse
Thank you my friend. Now i need to figure out a ROM to install that has Jelly Bean and everything works. Do you have any recommendations that will work with AT&T HTC ONE XL? I'm currently about to flash the superuser, thanks.
subarudroid said:
then after you have recovery installed. Download this http://forum.xda-developers.com/attachment.php?attachmentid=1195050&d=1342168095
ANd flash this zip in recovery
Click to expand...
Click to collapse
So i did not download the CM recovery as i already had the TWRP recovery installed prior to my post. I put the superuser zip file in my CD Card then i adb reboot recovery within command prompt which brought me into the Team Win Recovery Project V2.3.1.0, I then selected install and choose the superuser zip file you linked me to download, however it fails with errors. Do you know what I am doing wrong?
I think this all has to happen before rebooting after the new root process. So CID, then flash recovery, load and flash superuser, then reboot. I'm not sure how others are getting it to stick. I'm rooted on 1.85 with both my HOX's
Sent from my One X using xda premium
subarudroid said:
I think this all has to happen before rebooting after the new root process. So CID, then flash recovery, load and flash superuser, then reboot. I'm not sure how others are getting it to stick. I'm rooted on 1.85 with both my HOX's
Sent from my One X using xda premium
Click to expand...
Click to collapse
Im reading line 10 again and i think i need to install a custom rom first via flashboot then boot into recovery to install the superuser zip file. Read this again and tell me what you think?
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
1. After unlocking the bootloader, you can flash a custom "recovery" = twrp partition via fastboot,
2. boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su
I think I'm spot on with my last post.
Sent from my One X using xda premium
subarudroid said:
1. After unlocking the bootloader, you can flash a custom "recovery" = twrp partition via fastboot,
2. boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su
I think I'm spot on with my last post.
Sent from my One X using xda premium
Click to expand...
Click to collapse
What would be the ADB shell command to install lets say a file labelled superuser.zip ?
I've never tried nor know if possible to flash a zip in fastboot. To the best of my knowledge it has to be a image file.
Sent from my One X using xda premium
subarudroid said:
I've never tried nor know if possible to flash a zip in fastboot. To the best of my knowledge it has to be a image file.
Sent from my One X using xda premium
Click to expand...
Click to collapse
Alright thanks and sorry for all these questions. I'm going to try to flash a ROM like they recommended. By flashing the boot.img first then the rest of the rom. Thanks for all your help and sorry for anything.
GO into fastboot and try this one click method for recovery http://forum.xda-developers.com/attachment.php?attachmentid=1419624&d=1350837439
Don't be sorry. I'm wishing someone who has acomplished this could jump in. I wish I was more help.

[Recovery][Unofficial]TWRP 2.7.0.0 & Clockwork Recovery Touch 6.0.4.4 W/loki (D800)

[Recovery][Unofficial]TWRP 2.7.0.0 & Clockwork Recovery Touch 6.0.4.4 W/loki (D800)
Clockwork recovery touch with Loki for AT&T LG G2 (D800) Only.
TWRP recovery touch with Loki for AT&T LG G2 (D800) Only.
The only difference between official recoveries and this version is that Loki is built in to recovery.
THIS IS ONLY FOR 10d FIRMWARE. IF YOU ARE ON 10o THEN DO NOT USE!!!
You may want to flash 10d firmware. It can be found HERE with instructions. If you plan on using ROMs it is best to flash 10d firmware first.
Install Methods
Flashable Zip - Must have TWRP or whatever custom recovery already installed.
Boot into recovery and flash Recovery Zip file.
Manual Method - With no custom recovery already installed.
Must have Root first. Check HERE for root
Download the zip file to which recovery you want
Extract zip file to C:\
Open command prompt in root of C drive
You will need adb installed and properly setup in your environment variables. If not place the recovery.img wherever your adb file is located.
Type the following commands:
Code:
adb push recovery.img /data/local/tmp/recovery.img
adb shell
su
cd /data/local/tmp
dd if=/data/local/tmp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
exit
exit
adb reboot recovery
Now you should be in recovery.
Downloads
TWRP 2.7.0.0 with Loki
File Name openrecovery-twrp-2.7.0.0-d800-loki.zip
MD5 f640c221e4a6c575b375094f765d63ba
Clockwork Recovery Touch 6.0.4.4 with Loki
File Name recovery-clockwork-touch-6.0.4.4-d800-loki.zip
MD5 d50fbe2e026463e5df698f0b8b0a4d91
Download HERE
Mirror - Goo.im
Enjoy!
Web Presence:
Twitter
Google+
Credits
TWRP team for great recovery
Koush for original clockwork recovery
djrbliss for Loki
manojsuper said:
Does everything worked.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Everything I have tested so far.
Can I flash using flashify?
Sent from my LG-D802 using XDA Premium 4 mobile app
holeshot77 said:
Can I flash using flashify?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not tested that way but I am sure you can. If you just need the img file than extract from zip file.
If you try then let us know how it worked out
Using flashify works like a charm. Just extract img file and flash using flashify. As a third alternative.
Sent from my LG-D802 using XDA Premium 4 mobile app
I haven't used cwm since the days of the vibrant but ,my question is does this recovery speed up flashing a rom? It takes me less then a minute to flash a rom on the nexus 4 so I was just curious. Thanks.
Sent from my Nexus 7 2013 using XDA Premium 4 mobile app
ManOnTheMoon said:
I haven't used cwm since the days of the vibrant but ,my question is does this recovery speed up flashing a rom? It takes me less then a minute to flash a rom on the nexus 4 so I was just curious. Thanks.
Sent from my Nexus 7 2013 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you been flashing OEM modified ROMs on G2 the speed may have been due to the size of the ROMs.
AndroidUser00110001 said:
If you been flashing OEM modified ROMs on G2 the speed may have been due to the size of the ROMs.
Click to expand...
Click to collapse
Sorry I meant to include CM/AOSP based roms. The days of flashing 250mb+ roms are over :good:
I also havent used CWM in a long time now, are there any real differences between this and TWRP besides layout? Any special features unique to CWM?
EniGmA1987 said:
I also havent used CWM in a long time now, are there any real differences between this and TWRP besides layout? Any special features unique to CWM?
Click to expand...
Click to collapse
They all do the same so people will use what they prefer...
Will I lose my twrp backups if I flash this clockwork recovery?
If not, then would I be able to restore twrp backups with cwm? May be a silly question but I never tried this and worried about losing backups.
You will not lose them until you delete them but I am not sure if you can restore twrp backups with clockwork.
SysAdmNj said:
Will I lose my twrp backups if I flash this clockwork recovery?
If not, then would I be able to restore twrp backups with cwm? May be a silly question but I never tried this and worried about losing backups.
Click to expand...
Click to collapse
Sent from my LG-D800 using XDA Premium 4 mobile app
Thanks for this! Always good to see people doing stuff on this phone : )
Flashing was a breeze. Thanks.
Does this mount usb-otg? When I try "Mount USB Storage" nothing happens. I am pretty sure TWRP also does not yet support usb-otg. My hopes were CWM did.
Thanks
Adb side load is an alternative for Mount usb. Install Zip --> Install from adb sideload. Unfortunately this didn't work for me either. If it works for any of you guys please let me know the steps you followed. Sideload doesn't work in TWRP also.
In case of a soft brick either Mount usb or adb side load should help. Otherwise you have to go back to stock using Lg tools and start all over again.
varunkumars said:
Adb side load is an alternative for Mount usb. Install Zip --> Install from adb sideload. Unfortunately this didn't work for me either. If it works for any of you guys please let me know the steps you followed. Sideload doesn't work in TWRP also.
In case of a soft brick either Mount usb or adb side load should help. Otherwise you have to go back to stock using Lg tools and start all over again.
Click to expand...
Click to collapse
Thanks for the reply. I will be a happy camper when we get real usb-otg support from both recoveries
Format Cache is not working
Hey guys,
I flashed this and seem to have a problem with formatting the cache- it just stops so I cannot wipe becuase it stops at formatting cache. Anybody else experienced this before? I flashed again with same results.
thanks,
AC
aaronc_98 said:
Hey guys,
I flashed this and seem to have a problem with formatting the cache- it just stops so I cannot wipe becuase it stops at formatting cache. Anybody else experienced this before? I flashed again with same results.
thanks,
AC
Click to expand...
Click to collapse
Just let it finish, it takes a long time. I thought the same and then it finished up.
Worked like a charm. Thanks!
Sent from my LG-D800 using Tapatalk
Is wiping always going to take this long?
Sent from my LG-D800 using Tapatalk

[Q] BIG Problem with recovery! don't know what to do!!

Hey!
i got a problem .. it's been 4 hours and could not solve it!!
i tried to root my device today
unlocked boot-loader " Done "
but could not root " install Supersu "
when i flash a CWM recovery .. could not move anything into my phone!
i pressed at " Usb mount storage " nothing happened
flashed too many versions
tried to flash TWCP .. it does not work at all!! when i wrote the command " Flash ...... " it makes the device reboot
then black screen!!!
any help ? i need it so hard
Thank u
Good news .. Finally i could flash the TWRP!
but still could not flash rom!
i could not also mount USB storage
can any one explain this step : " Select supers " how could i select something if it is not into my phone and i can't mount!
FLASH "SUPERSU.MOTOG.ZIP"
1) Wait for screen to time out
2) Awaken device with the power button
3) Tap "Install"
4) Select "supersu.motog.zip"
5) Swipe to install
Which TWRP version did you use? I found that only version TWRP2631 works for me. As to the SuperSU thing. I was in TWRP and up popped a message that SuperSU wasn't install and did I want to install it? I replied "yes" and it did it for me.
grahamgo said:
Which TWRP version did you use? I found that only version TWRP2631 works for me. As to the SuperSU thing. I was in TWRP and up popped a message that SuperSU wasn't install and did I want to install it? I replied "yes" and it did it for me.
Click to expand...
Click to collapse
Thank for ur reply
I'm using the same version!
and didn't see this message
it's been 5 hours
Push supersu.zip to your phone using adb?
Sent from my Moto G using Tapatalk
mdentener said:
Push supersu.zip to your phone using adb?
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
i did! but nothing happened!
when i write " adb devices " it shows me list of empty devices !
could not do anything now .. i have recovery - open boot loader - but no rom and can't install roms or mount!
The phone doesn't boot into android?
Sent from my Moto G using Tapatalk
mdentener said:
The phone doesn't boot into android?
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
No!
please help people
i need my phone
Restore phone to stock firmware with guide here on xda so it boots properly. Then place supersu.zip on phone. Last flash cwm.
From cwm flash supersu.zip and voila stock firmware with root. This is exactly how I did it on my phone.
Sent from my Moto G using Tapatalk
mdentener said:
Restore phone to stock firmware with guide here on xda so it boots properly. Then place supersu.zip on phone. Last flash cwm.
From cwm flash supersu.zip and voila stock firmware with root. This is exactly how I did it on my phone.
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
thank u
i did it
restored stock firmware

Unable to root Moto g 2015 1 Gb model on Marshmellow

I'm having difficulty with recovery and super su. I have tried several twrp recovery versions on this site but after flashing it though fast boot recovery does not update. Only recovery works is ending name with test1 but when I'm in twrp recovery and flash super su phone goes in bootloop and stays on bootloader unlocked and warranty void message. Even I managed to put few ROMs on SD card but when i flash them recovery does not flash and finish process in two seconds. I have also used few versions of super su and have soft bricked my phone and now have flashed stock firmware few times via fast boot. Can you help me please to point which recovery version and super su will work? I have tried few threads stating worked but it did not work for me .Please help
Sent from my MotoG3 using Tapatalk
1GB or 2GB doesn't matter, the process is the same, so there is something else going on...
Can you just boot the TWRP image? "fastboot boot recovery.img" (replace recovery.img with the latest TWRP image, r5 I think)
If that doesn't work, what is the status of your bootloader from the bootloader screen?
Thanks, I flashed the latest one r5 and it shows in fast boot it is written however when I'm going to recovery it does not bring recovery and only poor android photo comes up with nothing found like happens in stock recovery . Only r1 test recovery successfully load but it does not flash anything
Sent from my MotoG3 using Tapatalk
mirpuri said:
Thanks, I flashed the latest one r5 and it shows in fast boot it is written however when I'm going to recovery it does not bring recovery and only poor android photo comes up with nothing found like happens in stock recovery . Only r1 test recovery successfully load but it does not flash anything
Click to expand...
Click to collapse
But can you BOOT it? (not talking about flashing anything)
After you flash, ate you starting recovery immediately or rebooting first, because you can't reboot before starting it or it will be overwritten by stock.
I have restarted in boatloader and gone into twrp recovery r1 test version but after flashing super su it goes to boot loop
Sent from my MotoG3 using Tapatalk
Also how can I start recovery after flashing it without restarting boatloader?
Sent from my MotoG3 using Tapatalk
My boat loader status is showing 3 unlocked
Sent from my MotoG3 using Tapatalk
mirpuri said:
My boat loader status is showing 3 unlocked
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Hey
Are you using a compatible supersu zip for your phone? From where did you downloaded it?
mirpuri said:
I have restarted in boatloader and gone into twrp recovery r1 test version but after flashing super su it goes to boot loop
Click to expand...
Click to collapse
Did you use the systemless method, where in the TWRP terminal you enter the echo command?
mirpuri said:
Also how can I start recovery after flashing it without restarting boatloader?
Click to expand...
Click to collapse
Flash, then press Vol Dn until it says Recovery and press Power
mirpuri said:
My boat loader status is showing 3 unlocked
Click to expand...
Click to collapse
OK, there are some bootloaders out there that say Engineering, those are... Umm... Troublesome.
[email protected] said:
Hey
Are you using a compatible supersu zip for your phone? From where did you downloaded it?
Click to expand...
Click to collapse
I have downloaded compatible super su from XDA thread also one from unlocked people stated it worked for them but didn't work for me
Sent from my MotoG3 using Tapatalk
acejavelin said:
Did you use the systemless method, where in the TWRP terminal you enter the echo command?
Flash, then press Vol Dn until it says Recovery and press Power
OK, there are some bootloaders out there that say Engineering, those are... Umm... Troublesome.
Click to expand...
Click to collapse
I have not used system less method. What twrp should i use as twrp and clockwordmod does not officially support my device
Sent from my MotoG3 using Tapatalk
mirpuri said:
I have not used system less method. What twrp should i use as twrp and clockwordmod does not officially support my device
Click to expand...
Click to collapse
Did you read my tutorial on how to root the G3? All the answers are there...
mirpuri said:
I have not used system less method. What twrp should i use as twrp and clockwordmod does not officially support my device
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Latest recovery should be used (I think it was 3.0.2 r5). And you'll have to do the systemless install, unless you want bootloop. Also make a note of which recovery you flash/boot- Osprey is for Moto G 2015 and Merlin is for Moto G 2015 Turbo Edition.
Broadcasted from Zeta Reticuli
Thanks
Sent from my MotoG3 using Tapatalk
Special Thanksto acejavelin and all of you , I have used systmless method and it has allowed me to install TWRP and SU and my mobile succesfully rooted again
Special Thanksto to you acejavelin . i have now used your turotorial , I have used systmless method and it has allowed me to install TWRP and SU and my mobile succesfully rooted again

Categories

Resources