Related
Hi
I made a very stupid mistake
I used the tool to root my xoom wifi model
I used the tool in this thread
http://forum.xda-developers.com/showthread.php?t=1011196
I tried to post this issue in the thread but I did not have the permissions.
by mistake I used the root of the 3G model
I followed the steps and everything was ok
I tried the unroot and here is the deadly (hopefully not) mistake
the xoom stops and first screen and refuses to boot
Did I brick my device??
Is there a way to resolve this problem??
Thanks
Yes, you have bricked it. Fastboot won't work at this point, so your only option is probably to return it.
-Jim (who's on his 2nd xoom)
Sent from my Xoom using Tapatalk
nawialkair said:
Hi
I made a very stupid mistake
I used the tool to root my xoom wifi model
I used the tool in this thread
http://forum.xda-developers.com/showthread.php?t=1011196
I tried to post this issue in the thread but I did not have the permissions.
by mistake I used the root of the 3G model
I followed the steps and everything was ok
I tried the unroot and here is the deadly (hopefully not) mistake
the xoom stops and first screen and refuses to boot
Did I brick my device??
Is there a way to resolve this problem??
Thanks
Click to expand...
Click to collapse
what does the first screen say? failed boot image?
BeagleBoy said:
Yes, you have bricked it. Fastboot won't work at this point, so your only option is probably to return it.
-Jim (who's on his 2nd xoom)
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
That's the thing I did not want to hear but expected it.
============================================
znfrazier said:
what does the first screen say? failed boot image?
Click to expand...
Click to collapse
No
I am stuck at the motorola logo and the word dual core technology
When I press Volume up or down (fanrkly I could not get into that menu again) I get a list
it includes the following:
Fast Boot
If I choose it I get
Starting Fastboot protocol support
nawialkair said:
That's the thing I did not want to hear but expected it.
============================================
No
I am stuck at the motorola logo and the word dual core technology
When I press Volume up or down (fanrkly I could not get into that menu again) I get a list
it includes the following:
Fast Boot
If I choose it I get
Starting Fastboot protocol support
Click to expand...
Click to collapse
Can you see the xoom in /fastboot devices? See if you can access you xoom from the computer. I actually did the same thing and got mine in working order.
nawialkair said:
That's the thing I did not want to hear but expected it.
============================================
No
I am stuck at the motorola logo and the word dual core technology
When I press Volume up or down (fanrkly I could not get into that menu again) I get a list
it includes the following:
Fast Boot
If I choose it I get
Starting Fastboot protocol support
Click to expand...
Click to collapse
Try doing this real quick, the best that can happen is that you can turn this around. You may NOT in fact be bricked. I made the mistake of doing this also, but I figured it is just like when I was using the Danger SPL on the G1 and I had to at least find a way.
So, do this real quick if you know how.
1. Power on and press Vol - at the same time
2. Open a command prompt to your ADB file and type in fastboot oem unlock
3. If this lets you in (it may not) go through the regular procedure of pressing Vol -+-+
4. It will format and you should know if it is in fact bricked or not because it won't boot up.
5. ******
6. Profit???
Let us know how it goes.
znfrazier said:
Can you see the xoom in /fastboot devices? See if you can access you xoom from the computer. I actually did the same thing and got mine in working order.
Click to expand...
Click to collapse
Yes I can see it
Thank you
stevenege said:
Try doing this real quick, the best that can happen is that you can turn this around. You may NOT in fact be bricked. I made the mistake of doing this also, but I figured it is just like when I was using the Danger SPL on the G1 and I had to at least find a way.
So, do this real quick if you know how.
1. Power on and press Vol - at the same time
2. Open a command prompt to your ADB file and type in fastboot oem unlock
3. If this lets you in (it may not) go through the regular procedure of pressing Vol -+-+
4. It will format and you should know if it is in fact bricked or not because it won't boot up.
5. ******
6. Profit???
Let us know how it goes.
Click to expand...
Click to collapse
I did that
and it started the format
After the boot, it stopped at the same place
Motorola's Logo and Dual Core
What's next??
thanks
root using the instructions in this thread it should fix your problem
http://forum.xda-developers.com/showthread.php?t=1010568
nawialkair said:
Yes I can see it
Thank you
I did that
and it started the format
After the boot, it stopped at the same place
Motorola's Logo and Dual Core
What's next??
thanks
Click to expand...
Click to collapse
you should try flashing the boot.img used to root i believe its tiamat 1.1.6 and the system.img for wifi. i have the stock system.img if you need it. hopefully that would git ya to boot atleast. MAKE SURE THAT IT IS WIFI ONLY.
Go here and follow the second post I posted. This will help you do this without downloading the files because they are already there.
Give it a shot at least
stevenege said:
Go here and follow the second post I posted. This will help you do this without downloading the files because they are already there.
Give it a shot at least
Click to expand...
Click to collapse
did they fix the boot prob with the one click? i haven't tried it.
znfrazier said:
did they fix the boot prob with the one click? i haven't tried it.
Click to expand...
Click to collapse
Yes, it has all been fixed. There still seems to be an issue with SU rights until you download BusyBox and no clue why.
I have been testing the WiFi one constantly and have not had any major hickups.
stevenege said:
Yes, it has all been fixed. There still seems to be an issue with SU rights until you download BusyBox and no clue why.
I have been testing the WiFi one constantly and have not had any major hickups.
Click to expand...
Click to collapse
good good. ill have to check it out. i still need to try out the pimp my xoom. ill post over there haha. gotta stay on topic.
Thanks ALL
I flashed Tiamat 1.1.6 boot.img
the problem is that when using this command:
adb remount
I get
error: device not found
The xoom is defined in the device manager as
Android adb Interface
nawialkair said:
Thanks ALL
I flashed Tiamat 1.1.6 boot.img
the problem is that when using this command:
adb remount
I get
error: device not found
The xoom is defined in the device manager as
Android adb Interface
Click to expand...
Click to collapse
Sounds like you are probably bricked :-/
Can I get the stock boot image
I just want to try that last option
I flashed the stock img and system img
It works fine
Yaaaaa
Thanks very much
Thanks very much
nawialkair said:
I flashed the stock img and system img
It works fine
Yaaaaa
Thanks very much
Thanks very much
Click to expand...
Click to collapse
Told ya haha, save those files on your computer for next time. I keep them in close reach just incase something happens. if you have any other problems give me a holla. glad everything is working again.
I think I'm more screwed than OP because I was already unlocked and rooted. Then locked my wifi xoom with the 3g one click tool. Yes I know that was very stupid but I was wondering what are my options?
Take it back to Amazon?
Use the following method in this thread?
Wait for SBF?
Thank you your time and sorry if I hijacked this thread.
jarretf said:
I think I'm more screwed than OP because I was already unlocked and rooted. Then locked my wifi xoom with the 3g one click tool. Yes I know that was very stupid but I was wondering what are my options?
Take it back to Amazon?
Use the following method in this thread?
Wait for SBF?
Thank you your time and sorry if I hijacked this thread.
Click to expand...
Click to collapse
It relocked? Yikes... I don't trust those 1-click things. I need to know what's going on step by step. My first Xoom got bricked when I thought I had untainted OEM image files and relocked it. There's really no reason to relock a Wifi Xoom right now.
Anyway, if it relocked, you might have been in the same boat I was where the computer wouldn't recognize the Xoom in Fastboot mode or RSD mode. And I went and got it exchanged at that point.
Oh, if RSD Lite can't see your Xoom in RSD mode, you might be out of luck. SBF won't help if RSD Lite can't see your Xoom. BUT, if it does see it, it sounds like you can flash the 3G/4G SBF from Motorola/Verizon and to get sorta running, then use Fastboot to overwrite the boot and system partitions.
I tried rooting my phone, but when I flashed CWM my Nexus S stopped booting... it freezes on the Google screen in the intro. I can boot into Fastboot, and cwm, but I cant connect the Internal memory to the computer without it booting like it is supposed to. Does anybody know of anything I can do to fix my phone and bring it back to stock??
There are guides for returning to stock stickied in the Nexus S 4G Android Development forum.
Before you do that though, try flashing a different recovery, like the one linked to here or here.
Btw, which guide did you use? You're not the first person to have this problem, and it's really bugging me (though probably not as much as it's bugging you :-o).
Maximilian Mary: I tried to post the link, but since I'm a new member I have to wait 8 posts before I can post a URL.... :/
I will try a different recovery, but how would I flash a rom if I can connect my phone via usb mount?
deadzunehd said:
Maximilian Mary: I tried to post the link, but since I'm a new member I have to wait 8 posts before I can post a URL.... :/
Click to expand...
Click to collapse
What's the title of the thread?
.
I will try a different recovery, but how would I flash a rom if I can connect my phone via usb mount?
Click to expand...
Click to collapse
I'm a little out of my depth here, but I think it's
fastboot flash system system.img.
You don't need to put the rom image on the sdcard. Just put it in the same folder as fastboot.
It was titled "How to Root Nexus S!"
And I will try to flash recovery and try that rom command, thank you )
deadzunehd said:
It was titled "How to Root Nexus S!"
And I will try to flash recovery and try that rom command, thank you )
Click to expand...
Click to collapse
Hmmm. I can't find that exact title. Could you pm me the link?
deadzunehd said:
thank you )
Click to expand...
Click to collapse
There's a button for that.
I got the link. Thanks. I looks like you flashed a boot image that is incompatible with your phone. That guide was for the T-Mobile Nexus S. (Why they're screwing with the boot.img to begin with, I really don't understand.)
Download the attached file, and unzip it to the same folder as fastboot. The md5 sum is d4a9508f9321eb25df3383f00f571e8b. Then
Code:
fastboot flash boot boot.img
You'll probably also want to use one of the recoveries listed above to
Code:
fastboot flash recovery recovery.img
, but leave system alone for now. Flash that only as a last resort.
deadzunehd said:
I tried rooting my phone, but when I flashed CWM my Nexus S stopped booting... it freezes on the Google screen in the intro. I can boot into Fastboot, and cwm, but I cant connect the Internal memory to the computer without it booting like it is supposed to. Does anybody know of anything I can do to fix my phone and bring it back to stock??
Click to expand...
Click to collapse
I had this problem after flashing the wrong ROM onto my phone. I got the phone back to stock using ODIN.
My thread can be found here
http://forum.xda-developers.com/showthread.php?p=14172335#post14172335
hope it helps
Acnescar said:
I had this problem after flashing the wrong ROM onto my phone. I got the phone back to stock using ODIN.
My thread can be found here
http://forum.xda-developers.com/showthread.php?p=14172335#post14172335
hope it helps
Click to expand...
Click to collapse
OMG!! im having the same issue. could you please post the link for ODIN so i can return to stock and take it from there please? I rely on my phone so much and i need it asap thank you.
same problem with me.
but in my case, the phone not only freeze after the google logo before boot. I tried several times to pull the battery and start the phone again, it took several times until the phone can boot normally again.
After that, my nexus s can work as usual. but it only takes 3-4 hour until it freeze/hangs or reboot automatically and show image of green robot lay down with red alert triangle...
sometimes I noticed all application force closed like gmail, gtalk, etc. (its a basic apps instead of 3rd party app)
History :
- root GB 2.37 using superoneclick
- upgrade OTA to ICS 4.04
- problem happens
- root using guide : nexusshacks.com
- unroot using guide : nexusshacks.com
- back to factory setting on GB 2.34
- upgrade OTA to ICS 4.04
- Still got that problem.....
I'm using Nexus S 4G Sprint, pls help me guys...
nexus s won't boot
I had the same problem and read elsewhere that heating the phone with a hairdryer solves the problem.
I must say, indeed it did.
I removed the battery and the SIM card, then heated up the phone (so it really feels warm) put back the battery and sim and simsalebim the phone started again. and is still working since (now already a few day's)
It seems that a component in the phone is heat sensitive, the question in my mind is when will this show again and do I need to consider buying a new phone.
But sofar it works
PS I also tried hard reset factory reset the lot, but in the end only heating up helped.
Good luck, David
I fixed this problem! but I had to wipe all user data by rooting it using nexusrootICS. It finally boots up and the phone works now... that's all I need.
So I couldn't find my issue on google, and I read somewhere I should just start a thread since this seems...complicated.
I also read that the tablet only supports USB3.0 ports for this stuff, and IRONICALLY I was always using one.
Anyway, so I "unLocked" my boot loader from my android 4.1.1, then I installed CWM recovery, and flashed a 4.2.2 ROM. However, I hated the keyboard on that ROM, and I liked the menus more on the stock ROM, so I decided to switch back to that and see if I could just customize the latest ROM or something.
So I got the US 4.2.1 ROM from ASUS' firmware downloads page, and flashed it fine. I can use the tablet fully, no problem. I copied the files to root it onto my internal memory since I figured I would do it later. I try to boot it into RCK, there is no USB option(I figured that's normal since it wasn't plugged in). I select RCK, it's loading for a minuted, then the android is on the ground and there was some kind of exclamation mark above his open corpse. (I figure there's not too many errors like that, if you need more specifics I'll check it out again.
I thought maybe it needed a USB connection to load the RCK, but long story short I never have a USB option and RCK won't load, but android itself is fine. I thought maybe I needed the USB debugging(I turned that off momentarily after I had the ROM), I tried turning that back on, but no luck.
Any ideas?
Or tips. Tips are cool.
Rojikku said:
So I couldn't find my issue on google, and I read somewhere I should just start a thread since this seems...complicated.
I also read that the tablet only supports USB3.0 ports for this stuff, and IRONICALLY I was always using one.
Anyway, so I "unLocked" my boot loader from my android 4.1.1, then I installed CWM recovery, and flashed a 4.2.2 ROM. However, I hated the keyboard on that ROM, and I liked the menus more on the stock ROM, so I decided to switch back to that and see if I could just customize the latest ROM or something.
So I got the US 4.2.1 ROM from ASUS' firmware downloads page, and flashed it fine. I can use the tablet fully, no problem. I copied the files to root it onto my internal memory since I figured I would do it later. I try to boot it into RCK, there is no USB option(I figured that's normal since it wasn't plugged in). I select RCK, it's loading for a minuted, then the android is on the ground and there was some kind of exclamation mark above his open corpse. (I figure there's not too many errors like that, if you need more specifics I'll check it out again.
I thought maybe it needed a USB connection to load the RCK, but long story short I never have a USB option and RCK won't load, but android itself is fine. I thought maybe I needed the USB debugging(I turned that off momentarily after I had the ROM), I tried turning that back on, but no luck.
Any ideas?
Or tips. Tips are cool.
Click to expand...
Click to collapse
First I use usb 2.0 as I have no 3.0 ports and have no problems (just for info).
The 4.2 update changed the bootloader menu. Now when you enter the menu if you do nothing it will automatically enter fastboot - watch the upper left for a message. You will need usb debugging. I suggest leaving it turned on as you never know when there will be an issue and you can't get into the os to turn it on.
Good Luck!
Rojikku said:
So I couldn't find my issue on google, and I read somewhere I should just start a thread since this seems...complicated.
I also read that the tablet only supports USB3.0 ports for this stuff, and IRONICALLY I was always using one.
Anyway, so I "unLocked" my boot loader from my android 4.1.1, then I installed CWM recovery, and flashed a 4.2.2 ROM. However, I hated the keyboard on that ROM, and I liked the menus more on the stock ROM, so I decided to switch back to that and see if I could just customize the latest ROM or something.
So I got the US 4.2.1 ROM from ASUS' firmware downloads page, and flashed it fine. I can use the tablet fully, no problem. I copied the files to root it onto my internal memory since I figured I would do it later. I try to boot it into RCK, there is no USB option(I figured that's normal since it wasn't plugged in). I select RCK, it's loading for a minuted, then the android is on the ground and there was some kind of exclamation mark above his open corpse. (I figure there's not too many errors like that, if you need more specifics I'll check it out again.
I thought maybe it needed a USB connection to load the RCK, but long story short I never have a USB option and RCK won't load, but android itself is fine. I thought maybe I needed the USB debugging(I turned that off momentarily after I had the ROM), I tried turning that back on, but no luck.
Any ideas?
Or tips. Tips are cool.
Click to expand...
Click to collapse
You lost your version of Cwm when you flashed the official update.
You will need to find the version of TWRP that is posted on here that has been modified to work with new bootloader and flash it thru fastboot.
tobdaryl said:
First I use usb 2.0 as I have no 3.0 ports and have no problems (just for info).
The 4.2 update changed the bootloader menu. Now when you enter the menu if you do nothing it will automatically enter fastboot - watch the upper left for a message. You will need usb debugging. I suggest leaving it turned on as you never know when there will be an issue and you can't get into the os to turn it on.
Good Luck!
Click to expand...
Click to collapse
Thanks! That was INCREDIBLY helpful. I noticed that message but I didn't know what it meant. Funny the solution was so obvious...
flumpster said:
You lost your version of Cwm when you flashed the official update.
You will need to find the version of TWRP that is posted on here that has been modified to work with new bootloader and flash it thru fastboot.
Click to expand...
Click to collapse
Alright, thanks. I have no idea how that works, but if that's what I need to do to fix it whatever. xD
Rojikku said:
Thanks! That was INCREDIBLY helpful. I noticed that message but I didn't know what it meant. Funny the solution was so obvious...
Alright, thanks. I have no idea how that works, but if that's what I need to do to fix it whatever. xD
Click to expand...
Click to collapse
The twrp mentioned above can be found here.
tobdaryl said:
The twrp mentioned above can be found here.[/URL]
Click to expand...
Click to collapse
Thanks... I actually installed openrecovery-twrp-2.2.2.0-tf300t-JB.blob
On that note, I get a password prompt every time I boot into it. I read somewhere wiping and reinstalling helped with that, but even after wiping everything with every button I had I could still boot and everything was there...
And since APPARENTLY my internal storage isn't good enough, I can't install a 4.2.2 ROM(I'm still debating what ROM I will end up using.) I can't find anything in TWRP...
EDIT: To clarify, I can't find anything under / or /sdcard where I would normally find stuff.
Rojikku said:
Thanks... I actually installed openrecovery-twrp-2.2.2.0-tf300t-JB.blob
On that note, I get a password prompt every time I boot into it. I read somewhere wiping and reinstalling helped with that, but even after wiping everything with every button I had I could still boot and everything was there...
And since APPARENTLY my internal storage isn't good enough, I can't install a 4.2.2 ROM(I'm still debating what ROM I will end up using.) I can't find anything in TWRP...
EDIT: To clarify, I can't find anything under / or /sdcard where I would normally find stuff.
Click to expand...
Click to collapse
Wrong twrp! You need openrecovery-twrp-2.4.4.0-tf300t-4.2.blob until you are off stock 4.2 then you need openrecovery-twrp-2.4.4.0-tf300t-JB.blob. Unless the rom you flash is also for 4.2 bootloader. Both are located at teamwin.
4.2 changes directories in your sdcard for multi-user operation. Look under the 0 directory in /sdcard/0.
The password is for encryption that 4.2 uses to provide multi-user. The /sdcard allows total freedom under normal roms(even without root) but to stop user interaction 4.2 encrypts for user restriction. The first user gets directory 0 and so on.
Flash the proper twrp for 4.2 stock.
As far as flashing a new rom look at the op and determine if it is for the new stock 4.2 bootloader. If not do not flash over 4.2 but downgrade first. I have upgraded from 10.4.2.20 to stock 4.2 and downgraded from stock 4.2 to 10.4.2.20 several times without issue.
Stock 4.2 includes an assert to only allow upgrade from 10.4.2.20.
tobdaryl said:
Wrong twrp! [/URL]You need openrecovery-twrp-2.4.4.0-tf300t-4.2.blob until you are off 4.2 then you need openrecovery-twrp-2.4.4.0-tf300t-JB.blob. Both are located at teamwin.[/URL]
4.2 changes directories in your sdcard for multi-user operation. Look under the 0 directory in /sdcard/0.
The password is for encryption that 4.2 uses to provide multi-user. The /sdcard allows total freedom under normal roms(even without root) but to stop user interaction 4.2 encrypts for user restriction. The first user gets directory 0 and so on.
Flash the proper twrp for 4.2 stock and hold a minute or you are going right back where you were or worse. You need slightly more info before going forward and I need to check my notes while you get the proper twrp flashed.
Click to expand...
Click to collapse
Yeah, I really don't know that much about all this. I'd basically barely used android before I got this tablet a couple days ago, so I only have two days worth of experience...and I didn't get to use it a horribly large amount.
You seem like you're going to help a lot though, so thanks in advance. xD I'll get to flashing that twrp.
Rojikku said:
Yeah, I really don't know that much about all this. I'd basically barely used android before I got this tablet a couple days ago, so I only have two days worth of experience...and I didn't get to use it a horribly large amount.
You seem like you're going to help a lot though, so thanks in advance. xD I'll get to flashing that twrp.
Click to expand...
Click to collapse
I'll try but this new stock 4.2 is a new animal with many changes and we are just learning.
tobdaryl said:
I'll try but this new stock 4.2 is a new animal with many changes and we are just learning.
Click to expand...
Click to collapse
It actually was stock 4.1.1 >>; I just upgraded it. WHICH APPARENTLY WAS A HORRID DECISION. Regardless, I'm trying to install my twrp.img file, ran the command, and it's been writing for like ten minutes... 7672KB. I'm not certain if it's still writing or not...but it claims to be.
Rojikku said:
It actually was stock 4.1.1 >>; I just upgraded it. WHICH APPARENTLY WAS A HORRID DECISION. Regardless, I'm trying to install my twrp.img file, ran the command, and it's been writing for like ten minutes... 7672KB. I'm not certain if it's still writing or not...but it claims to be.
Click to expand...
Click to collapse
OK. Sometimes it takes seconds and sometimes longer. When you upgraded you used 4.2 (10.6.1.8)?
tobdaryl said:
OK. Sometimes it takes seconds and sometimes longer. When you upgraded you used 4.2 (10.6.1.8)?
Click to expand...
Click to collapse
Uhm. First. ****. It was frozen, so I canceled it and restarted it(Been a good twenty minutes doing nothing). Is it safe to reboot my tablet? I can't restart it, fastboot crashes. >>; Restart? Leave it? What?
I decided to take the risk and reboot it. Everything fine. I flashed the tool, ran the reboot command(Which actually didn't work... >>; But I rebooted it manually and it seems fine...)
On that note, is it actually possible to destroy a device beyond repair accidentally? And the TWRP tool said it flashed fine but I still have the old version. Odd....
I do have the image you said currently installed, I checked the version against my download.
Rojikku said:
Uhm. First. ****. It was frozen, so I canceled it and restarted it(Been a good twenty minutes doing nothing). Is it safe to reboot my tablet? I can't restart it, fastboot crashes. >>; Restart? Leave it? What?
Click to expand...
Click to collapse
I'm not sure where you are reading the above. Tell me your current situation and what rom you were on when you began this flash.
tobdaryl said:
I'm not sure where you are reading the above. Tell me your current situation and what rom you were on when you began this flash.
Click to expand...
Click to collapse
I originally flashed the ROM image of TF300T_US_epaduser_10_6_1_8_SDupdate, and I can still boot into that fine. I tried to install the RCK tool you recommended, but it froze. I did a ctrl+c, and then coldbooted the tablet. I tried to do it again, said it was fine, nothing happened. So I think "Maybe I need to boot into the OS and retry it after rebooting from there." So I do that, and now the recovery is frozen again. my command is fastboot -i 0x0b05 flash recovery twrp.img.
That the info you needed?
Rojikku said:
I originally flashed the ROM image of TF300T_US_epaduser_10_6_1_8_SDupdate, and I can still boot into that fine. I tried to install the RCK tool you recommended, but it froze. I did a ctrl+c, and then coldbooted the tablet. I tried to do it again, said it was fine, nothing happened. So I think "Maybe I need to boot into the OS and retry it after rebooting from there." So I do that, and now the recovery is frozen again. my command is fastboot -i 0x0b05 flash recovery twrp.img.
That the info you needed?
Click to expand...
Click to collapse
Go back and check my previous post with the links for twrp, I specified use of blob files. Either should work but some units seem to have an issue with img files. Also check that you have usb debugging turned on in developer options.
tobdaryl said:
Go back and check my previous post with the links for twrp, I specified use of blob files. Either should work but some units seem to have an issue with img files. Also check that you have usb debugging turned on in developer options.
Click to expand...
Click to collapse
I downloaded the .blob version now. That one worked fine. I guess it either didn't like the .img or my download was a bit corrupt.
I now have TWRP version 2.4.4.0.It still wants a password I never set though. I was just finishing making sure it actually worked as you posted.
Rojikku said:
I downloaded the .blob version now. That one worked fine. I guess it either didn't like the .img or my download was a bit corrupt.
I now have TWRP version 2.4.4.0.It still wants a password I never set though. I was just finishing making sure it actually worked as you posted.
Click to expand...
Click to collapse
When it asks for the password hit cancel and just ignore the error.
tobdaryl said:
When it asks for the password hit cancel and just ignore the error.
Click to expand...
Click to collapse
Okay. THEN what do I do? It doesn't seem to detect an OS even though I can boot into one. I can't find my ROM.zip in there and I'm not sure what to do from there... If I could find the ROM I would be fine, possibly. I'm trying to flash this one http://fitsnugly.euroskank.com/?rom=cm10&device=tf300t just to see if it works right. (I want it to show my dock's battery and have the overclocking menu in that drag-up interface.)
Rojikku said:
Okay. THEN what do I do? It doesn't seem to detect an OS even though I can boot into one. I can't find my ROM.zip in there and I'm not sure what to do from there... If I could find the ROM I would be fine, possibly. I'm trying to flash this one http://fitsnugly.euroskank.com/?rom=cm10&device=tf300t just to see if it works right. (I want it to show my dock's battery and have the overclocking menu in that drag-up interface.)
Click to expand...
Click to collapse
Thanks for the link. I looked at the info provided for that rom. You don't want to flash that over an encrypted tablet which you now have. The only safe way I have found to go to or from stock 4.2 rom is with stock 10.4.2.20.
To do that you would flash 10.4.2.20 with twrp, boot into os, reboot back to the bootloader which will now be four icons, select usb, use fastboot to flash twrp again, and now flash your new rom.
This sounds long but removes encryption from your tablet and you should be able to flash the jb rom of choice that does not require stock 4.2 bootloader.
Everything is screwed for me. I can't even RSD back to stock. I can access TWRP, but can't wipe System or Data. Fastboot is just there and won't actually push anything. I already have a Moto X now, and I was talking about this issue about a week ago on the Android Development subcat, but I thought I would give it one last go on here to see if I can at least make it a backup.
kungpowchicken said:
Everything is screwed for me. I can't even RSD back to stock. I can access TWRP, but can't wipe System or Data. Fastboot is just there and won't actually push anything. I already have a Moto X now, and I was talking about this issue about a week ago on the Android Development subcat, but I thought I would give it one last go on here to see if I can at least make it a backup.
Click to expand...
Click to collapse
Maybe if you could give some more detail about what exactly you can and can't get the phone to do, what screens can be accessed, and what you did that lead to this condition, we could offer some advice.
Also, no offence to the devs, but twrp is the devil lol. Most issues I have had in the past have led back to it in one way or another, so I never use it. (Just my opinion)
Tappin G2 Style
I can get to the Fastboot screen, I can access TWRP, and I can get the phone to bootloop at the boot animation screen.
I can't push anything through ADB or Fastboot, I cannot mount data or system in TWRP or otherwise. RSD comes back failed every time with every single stock build I use.
Literally two weeks ago, I was in bed, watching TV, with the phone charging. I unlock it to see if I had any notifications, and it kept saying that Nova launcher FC'd. So logically, I rebooted my phone and that's when it started boot looping.
I did nothing to the phone for a couple of hours, it was on the official CM 10.2 11/9 build. I had that ROM running fine for at least 24 hours before it went FUBAR.
kungpowchicken said:
Everything is screwed for me. I can't even RSD back to stock. I can access TWRP, but can't wipe System or Data. Fastboot is just there and won't actually push anything. I already have a Moto X now, and I was talking about this issue about a week ago on the Android Development subcat, but I thought I would give it one last go on here to see if I can at least make it a backup.
Click to expand...
Click to collapse
Is it this problem?: http://forum.xda-developers.com/showpost.php?p=47558893&postcount=47
If so use this solution: http://forum.xda-developers.com/showpost.php?p=47716278&postcount=57
scoobaspeaz said:
Is it this problem?: http://forum.xda-developers.com/showpost.php?p=47558893&postcount=47
If so use this solution: http://forum.xda-developers.com/showpost.php?p=47716278&postcount=57
Click to expand...
Click to collapse
Nope, my status us unlocked: 3. But when I get home, I'll try the mfastboot instead if fastboot.
kungpowchicken said:
I can get to the Fastboot screen, I can access TWRP, and I can get the phone to bootloop at the boot animation screen.
I can't push anything through ADB or Fastboot, I cannot mount data or system in TWRP or otherwise. RSD comes back failed every time with every single stock build I use.
Literally two weeks ago, I was in bed, watching TV, with the phone charging. I unlock it to see if I had any notifications, and it kept saying that Nova launcher FC'd. So logically, I rebooted my phone and that's when it started boot looping.
I did nothing to the phone for a couple of hours, it was on the official CM 10.2 11/9 build. I had that ROM running fine for at least 24 hours before it went FUBAR.
Click to expand...
Click to collapse
i made a modified utility to fix the partition error but need someone to test it please. it should do the process previously suggested automatically through the script.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
bweN diorD said:
i made a modified utility to fix the partition error but need someone to test it please. it should do the process previously suggested automatically through the script.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
Click to expand...
Click to collapse
Testing now.
UPDATE: Still no go.
kungpowchicken said:
Testing now.
UPDATE: Still no go.
Click to expand...
Click to collapse
Well that sux.
Your problem is different than what I made this for but I was hoping it would work for you.
What did it do, fail all the way through?
When I tested it on my phone it reported flashing the partitions ok. There was actually extra text displayed while it was doing it that I didn't put into the script, that's how I knew it was working.
Tappin G2 Style
Failed all the way.
kungpowchicken said:
Failed all the way.
Click to expand...
Click to collapse
im running out of suggestions
if you havent tried to put stock recovery back on yet, how about we try that and see what happens.
if you dont know how to do it through adb, just grab the 1.34 utility from the dev forum, it will push it through fastboot.
something is obviously wrong with twrp, maybe we can fix that first.
I tried flashing even the stock Recovery manually and through the 1.34 utility. Always comes up failed. :sad:
Did you try the manual steps that I posted in my links?
i hope that works, but im doubtful.
the utility essentially flashes exactly as you would manually.
he doesnt have a partition issue, im guessing something is wack with the permissions.
if twrp somehow screwed up the permissions to read only, i believe even the partition file cant overwrite it. i could be wrong.
So I think it has something to do with the Permissions of one or more of the partitions. I just noticed it keeps saying Permissions Denied when I try to fastboot or mfastboot.
kungpowchicken said:
So I think it has something to do with the Permissions of one or more of the partitions. I just noticed it keeps saying Permissions Denied when I try to fastboot or mfastboot.
Click to expand...
Click to collapse
Are you sure you have the snapdragon fastboot? Can't hurt to reinstall it.
Sent from my MB886 using Tapatalk
Also have you tried flashing it manually? (fastboot flash system system.img, etc.)
penser said:
Are you sure you have the snapdragon fastboot? Can't hurt to reinstall it.
Sent from my MB886 using Tapatalk
Also have you tried flashing it manually? (fastboot flash system system.img, etc.)
Click to expand...
Click to collapse
he defiantly has the right fastboot, its in the utility that has been downloaded thousands of times.
if its write protected some how, its not going to flash no matter how you try it.
what i was wondering is if recovery can fix permissions that deep, not sure he said he tried that.
What do you mean with recovery?
kungpowchicken said:
What do you mean with recovery?
Click to expand...
Click to collapse
go into twrp, advanced (i think thats the right section) and look for a line that says "fix permissions" and do it.
Keeps saying it can't mount anything.
kungpowchicken said:
Keeps saying it can't mount anything.
Click to expand...
Click to collapse
thats what i figured would happen
Problem resolved thanks to bweN diorD!
Dark System said:
Hey everyone, I figured this was the right section to post a question, sorry if I was mistaken.
So I recently rooted my phone and tried to install a custom ROM on it, turns out the ROM I selected was probably for the wrong model or something because my screen was just black. So I booted into recovery to try and restore it on the ROM I backed up and it was gone so now I'm kinda ****ed on a phone for now, before I look into buying a new one I wanna see if there's any way I can resolve this and unbrick it.
When I turn the phone on it just loops the booting screen and when I boot into recovery it just has the droid dude with an exclamation mark on it then turns off and does the boot loop.
I was wondering if maybe there's a file I can put on an external drive and it will automatically restore back to stock like on other devices.
I've done a lot stuff like this to my PS3 just never tried it for my phone so I'm just hoping there's a method out there for me, please provide any feedback or questions about it, I'm just trying to get this resolved and I have no time really to research it because of work and a newborn baby plus you guys would know more about it than me so yeah. Thanks!
Click to expand...
Click to collapse
usually when you flash the wrong software to a phone it is toast, but you may be in luck as it still turns on.
video here.
further instruction here.
if that doesnt work... well its not good unfortunately.
Dark System said:
Hey everyone, I figured this was the right section to post a question, sorry if I was mistaken.
So I recently rooted my phone and tried to install a custom ROM on it, turns out the ROM I selected was probably for the wrong model or something because my screen was just black. So I booted into recovery to try and restore it on the ROM I backed up and it was gone so now I'm kinda ****ed on a phone for now, before I look into buying a new one I wanna see if there's any way I can resolve this and unbrick it.
When I turn the phone on it just loops the booting screen and when I boot into recovery it just has the droid dude with an exclamation mark on it then turns off and does the boot loop.
I was wondering if maybe there's a file I can put on an external drive and it will automatically restore back to stock like on other devices.
I've done a lot stuff like this to my PS3 just never tried it for my phone so I'm just hoping there's a method out
for me, please provide any feedback or questions about it, I'm just trying to get this resolved and I have no time really to research it because of work and a newborn baby plus you guys would know more about it than me so yeah. Thanks!
Click to expand...
Click to collapse
Boot into bootloader and flash stock rom using odin..
bweN diorD said:
solution
Click to expand...
Click to collapse
Alright thank you! I'm pretty confident this will work, once the stock ROM file finishes downloading, which it doesn't seem that it wants to work. I've downloaded it 5 times now and every time it's done it's a fail.. I'll keep trying though.
bweN diorD said:
if that doesnt work... well its not good unfortunately.
Click to expand...
Click to collapse
yeah it didn't work, did everything right but when it tries to reboot I get the dead little droid guy.