* * * * * * * * * * * * * * * * * * * * * * * * *
PhilZ Touch 6 Recovery
CWM Advanced Edition 6.x
* * * * * * * * * * * * * * * * * * * * * * * * *
PhilZ Touch CWM Advanced Edition is developed by XDA Recognized Developer Phil3759 now fully supports MediaTek devices . . .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports Five generations of MediaTek SoC in One-Porting-Tool.
Arm11
Cortex-A9
Cortex-A7
big.LITTLE
Cortex-A53
Video Preview
For full features & functions, refer to Main Thread here . . . :good:
Credits
Phil3759
Michfood
suhas.holla
shoxxy
Last but not least, my Master Shifu Carliv who has taught me how to compile & continuously guiding me to the right direction & also many DEVs that shared & published their findings on the World Wide Web on various subject . . . . . .
Updated Credits - Added support for MTK big.LITTLE & Cortex-A53
Huge Credits to . . .
Russian Master Shifu Javum
Master Shifu Carliv
Huge Thanks to Xpeca1 for confirming all the porting tool features & functions is working correctly on his Cortex-A53 & not forgetting NiksSkersts too . . . :highfive:
This updates has the most beta-tester, never the less, thanks for all their contributions too . . .
XDA:DevDB Information
Easy Magic PhilZ Touch Installer for MediaTek Devices ONLY (Developers ONLY), Tool/Utility for all devices (see above for details)
Contributors
yuweng
Source Code: https://github.com/PhilZ-cwm6/philz_touch_cwm6
Version Information
Status: Stable
Current Stable Version: Final Release 6.59.0
Stable Release Date: 2015-03-09
Created 2014-05-11
Last Updated 2015-04-09
Terms & Conditions of Use
codeworkx said:
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Thanks to all contributors!!!
Click to expand...
Click to collapse
As Master Shifu codeworkx says, the same applies here . . .
All i'm asking is for you to give proper credits to me & the DEVs that i mentioned on the porting tool, without them sharing, this porting tool wouldn't have exists !
i have seen many that took my work, got a ported working PhilZ Touch on their MTKs & shared it directly even here on XDA ! while some at other forum threads BUT not a single word mentioning this thread, me or the porting tool or the DEVs that has contributed to this project . . .
Many just make a new thread with the ported PhilZ Touch & shared it with their followers, fooling their followers by not mentioning credits so that their followers thinking that the ported PhilZ Touch is built from source & is their own work, collected all the Thanks & that will make them look cool while some even solicit for Donations !
Anyone can just download this porting tool, run the exe & they will get a ported PhilZ Touch on their MTK, what is so cool about that . . .
Do you know how many hours i have put into this, not mentioned is the time studying & building PhilZ Touch from source, PC hardware upgrading, broadband fee, electricity fee, time to study & building this porting tool exe & i'm sharing this all for FOC & i don't solicit for Donations or Thanks in return, i don't even post my Donate button . . .
If you wanna start a new thread to support specific MTK devices with the ported PhilZ Touch, i have absolutely no problem with that, it will be your responsibility to response & provide support to your followers but pls give proper credits . . .
If you think this porting tool is too complicated & you would wanna start a new thread/ guide/ video or whatever either here or else where, again i have absolutely no problem with that BUT pls pls don't mirror the porting tool. i'm sure you have seen this all the time at XDA here by other DEVs, the logic is very simple, when you mirror the files, there is no way of tracking which version has bugs. Most importantly, i need direct feedback from users & when you mirror the files, your followers will download that version from your link & they complain & feedback to you but you won't be able to fix it so pls put a link direct to this thread so that i can improve on this porting tool.
If you wanna post this porting tool on your blog, website or anything at all, again i have absolutely no problem with that BUT again post a link directly to this thread so that users can always post a bug report here & they will always get the new, bug free porting tool as i will fix it when i receive bug report.
Credits mentioning & redirecting link to original threads won't make you low standard, in fact your followers will be thanking you for sharing with them a great new tool that you found. Credits mentioning & redirecting link to original threads also means that you give respect & honor the original DEVs of the tool, this would also enable feedbacks on new ideas, new features & improvement of that particular tool too.
If you are a company then pls get my permission first or the least you can do is Donate to Phil3759 for a job well done & if you are an end user, you are also encourage to do so too, fyi, i did . . .
Features
Auto mode
- You don't need to know a thing & it'll port a working PhilZ Touch for your MTK & that is why it is called Magic . . .
Manual mode
- Let you choose either to use your boot.img or recovery.img for porting.
- Let you manually choose your device res, MTK fixes, Flip screen/ Flip Touch, different font size & uses all files from your stock recovery when using recovery.img. For boot.img porting, this tool will only use its kernel only. Refer to here for more info . . .
- device resolutions
- flipped screen
UnPack/ RePack mode
- Let you mod whatever you want with option to install it right away to your MTK
Requirement
- Requires Root
- Install adb driver
- Enable USB debugging
- Disable UAC
- Disable driver signature
- Works from Gingerbread to Lollipop but NOT on encrypted data partition on Lollipop but why you enable it back ?
- No need ro.secure=0 to run
recovery.fstab How-to
Preface
As mentioned few times, i don't own all the MTK devices available on the market so a few things might not work on your MTK. So use the UnPack/ RePack mode to edit necessary files typically the init.rc & recovery.fstab.
UnPack other MTK PhilZ Touch by other DEVs & see how they did it.
As mentioned few times, the porting tool now is AIO so go ahead & play with it.
Intro
What is recovery.fstab
The actual require backup partition for MTKs or any android devices are actually ONLY just the boot, cache, data & system partition.
When you encounter any problems such as doesn't boot/ bootloop issues after a new app installation or anything at all, a Wipe Data/ Factory Reset or Restore with ONLY the system & data partition & you'll be able to revert to previous working state in a short while. Thats why its very important to make a backup before modding anything at all !
For bootloop issues with new firmware installation (update.zip) then its best to restore everything. Having said that, if you flash preloader using SP Flash Tool then PhilZ Touch restore would not be able to restore it or for that matter, your device wouldn't even be able to boot at all (brick), thats why it is important to backup your Factory ROM with MTK Droid Root & Tools first.
For latest MTK armv8
Since the latest MTK armv8 is using direct device path, below is possible as i've seen it on msm devices but personally i think it is unnecessary to have those partition backed up as it will take alot of space & typically you only brick the system or data partition but then again, that is entirely up to you on what you wanna backup. Below example is taken from Master Shifu Carliv github, added all various armv8 devices direct device path partition for reference. To find out the actual MTK armv8 partition info on your device, use the command adb shell cat /proc/partinfo & adb shell ls -al /dev/block/platform/mtk-msdc.0/by-name
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#<src> <mnt_point> <type><mnt_flags and options><fs_mgr_flags>
/dev/block/platform/mtk-msdc.0/by-name/boot /boot emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/nvram /nvram emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/flashinfo /flashinfo emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/expdb /expdb emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/recovery /recovery emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/secro /secro ext4 relatime wait,check
/dev/block/platform/mtk-msdc.0/by-name/seccfg /seccfg emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/proinfo /proinfo emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/para /para emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/logo /logo emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/tee1 /tee1 emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/tee2 /tee2 emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/otp /otp emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/lk /lk emmc defaults defaults
/dev/block/platform/mtk-msdc.0/by-name/system /system ext4 ro,noatime wait
/dev/block/platform/mtk-msdc.0/by-name/preload /preload ext4 noatime,nosuid,nodev,noauto_da_alloc,discard wait,check
/dev/block/platform/mtk-msdc.0/by-name/cache /cache ext4 noatime,nosuid,nodev,noauto_da_alloc,discard wait,check
/dev/block/platform/mtk-msdc.0/by-name/userdata /data ext4 noatime,nosuid,nodev,noauto_da_alloc,discard wait,check,resize,encryptable=/dev/block/platform/mtk-msdc.0/by-name/metadata
/dev/block/platform/mtk-msdc.0/by-name/protect1 /protect_f ext4 noatime,nosuid,nodev,noauto_da_alloc,commit=1,nodelalloc wait,check,autoformat
/dev/block/platform/mtk-msdc.0/by-name/protect2 /protect_s ext4 noatime,nosuid,nodev,noauto_da_alloc,commit=1,nodelalloc wait,check,autoformat
/dev/block/platform/mtk-msdc.0/by-name/persist /persist ext4 relatime wait,check
/dev/block/platform/mtk-msdc.0/by-name/custom /custom ext4 relatime wait,check
/devices/mtk-msdc.0/11240000.MSDC1/mmc_host/mmc1 auto auto defaults voldmanaged=sdcard1:auto
To manually make a SP Flash Tool backup of your MTK armv8 Factory ROM then refer to here & you can also use the following empty cache secro userdata since a Factory Reset/ Wipe Data will wipe data partition anyway.
Updates
Refer to here & here for custom partition backup/ restore on armv8 Thanks to Katinatez . . . :good:
Refer to this the only lead shared by BachMinuetInG . . . :good:
Aroma File Manager
It is a known problem that aromafm will not to work properly on flip-screen, this is not a PhilZ Touch problem as it has never been updated for almost a year.
Flip Screen/ Flip Touch/ Font size
It is a known problem that MTK manufacturer uses non-standard design & uses different Flip Screen/ Non-Flip LCD with different combinations of Flip/ Non-Flip Touch Screen on various Portrait & especially Landscape Android devices.
There is absolutely no way that the porting tool could detect whether your MTK's Touch is FlipX or FlipY or SwapXY so i build all possible combinations into the porting tool -> Manual-mode -> Try all combinations one at a time until one that works for your device.
Typical Flip Screen device then choose either Flip Screen Only or Flip Screen FlipX-FlipY. For Landscape devices (tabs), typically is SwapXY FlipY.
As said, i don't own all MTK devices so i donno which font size is suitable for your device so again, you'll need to play around with the different selection. Below are available fonts as demonstrated on my 480x854 res . . .
Bug report <- No support if you don't attach it to your post.
Please always attach recovery.log & log.txt from the porting tool or i'll be giving the wrong advice based on assumption & that might brick your device !
How to obtain recovery log
adb pull /tmp/recovery.log -> Attach to your post
At PhilZ Touch -> Advanced Functions -> Report Error -> Copy log from /sdcard/clockworkmod/philz_recovery.log -> Attach to your post
If you don't see me replying means either the answer is already at this thread so start reading every page, its not like there are 100 over pages, as of 18 March 2015, there are only 14 pages . . .
The 2nd reason you don't see me replying is i donno the answer then head up to PhilZ Touch development thread & get help from Phil3759 directly . . .
Questions & Answers
Q : Your tool doesn't work.
A : Its already explained at the OP, pls read EVERYTHING at Page 1 !
Q : I can't get adb to work on my PC.
A : Then get one of your device forum DEV to look at this porting tool.
Q : I have a MTK model xxx SoC YYY, does your porting tool support it.
A : The title already said it, for all MediaTek Devices ONLY
Q : I have a MTK but i'm afraid the porting tool would brick my device.
A : Then don't use it ! Its for Developers ONLY !
Q : OP said DO NOT USE IT ON LOCKED BOOTLOADER but the link doesn't say much for MTK devices.
A : There isn't any guide to identify locked bootloader on MTKs, generally you'll have to flash the recovery.img to find out whether it bricks ! However, farenheith has confirmed by flashing back the original stock 3e recovery.img & his locked bootloader MTK Motorola boots back !
To check your bootloader
Code:
adb reboot-bootloader [COLOR="Blue"]or[/COLOR] adb reboot bootloader [COLOR="blue"]or[/COLOR] adb reboot fastboot
fastboot getvar all
Code:
(bootloader) unlocked: NO
To unlock it, use below command.
Code:
fastboot oem unlock
Source
As explained BRANDED at the OP, UNBRANDED MTKs are generally MTKs directly from China, have unlock bootloaders.
Updates
MTK armv7/ armv8 LP refer to this workaround, make sure to unlock your bootloader first !
List of supported MTK devices . . .
Installation
Installation How-to
Where is the Downloads . . .
WARNING
Even though wrong installation of custom recovery normally will bricks the recovery only however it is better to be safe than sorry.
PhilZ Touch is packed with many features so typically it will work on MTK devices with above 6Mb recovery partition however you can try your luck.
Tested working perfectly on my legacy MTK device, MT6573 & MT6577.
Make a Factory ROM backup first with MTK Droid Tools. My old guide here.
Install Flashify & make another backup of your current recovery first & also the boot.img too
Extract, double-click PhilZ Setup & follow the on-screen for instructions.
YOUR TOOL DOESN'T WORK . . .
i've seen this at many threads & also mentioned this many times at my other threads, most frequent reply is it doesn't work, you have given nothing at all to figure out what went wrong . . .
Please list out as many info as possible then it'll be easier to trouble-shoot & read EVERYTHING before hands-on, fyi, tested working on XP to Win10 Technical Preview . . .
What OS you are using on the PC & your MTK...
Did you disable UAC & Anti-Virus
Did you execute the porting tool at C: drive if you're using XP else then at your Desktop
Did you try Run as Administrator
Could it be some other software that you installed that interfere with the porting tool then uninstall it
Did you try it on other PC with other version OS or even different USB port
Try uninstall all previous adb driver -> Device Manager -> View -> Show hidden devices -> uninstall all ADB Interface/ Android device -> reboot -> re-install. Refer to screenshot -> View attachment 3018860
Did you try latest google ADB driver while for XP try this one
Known problems on MTK devices
Known problems on MTK devices
E: failed to mount /cache
Mostly older intermediate MediaTek devices such as MT6589, MT6572 that comes with only 6Mb recovery partition, most probably won't work. However, it works on my legacy MT6573, MT6577 because its kernel is much smaller. There has been feedback from fellow xda members that some latter MediaTek devices comes with 7Mb & 8Mb. Latest MT6592 has a recovery partition of more than 8Mb.
PhilZ Touch does not support ubifs
PhilZ Touch does not support MTK Alcatel devices with /custpack partition. Added support at beta version
Haven't identify latest voldmanaged mount points for Internal SD that uses /storage/usbdisk voldmanaged=usbdisk:auto so it won't mount Internal SD on such layouts. Thanks to adhamamar for sharing the solution. :good:
In the past, there has been reports that Touch doesn't work at recovery on some MTK devices, try using different releases of kernels from your device. Recovery is independent so GB, ICS or JB kernel will work provided they are from your device.
Thanks to shoxxy for the tip, flip screen works on PhilZ Touch with added Flip screen flag. However, it has a small glitches that is the screen will flashes & flip upside down when using the virtual keys. Since Touch is fully working either don't use the virtual keys or just disable it permanently. PhilZ Settings -> GUI Preferences -> Toggle Virtual Keys
Updates
Fixed flip screen flickering, Thanks to Teamwin updated flip screen codes . . . :good:
# Even though the MTK SoC is designed by MediaTek but the one that produces it is hundreds if not thousands of factories so some might use other combinations to boot up the recovery. It is a known problem that some MTK doesn't wanna boot up PhilZ Touch the normal way so try Popey900 technique. Standard procedure : Take out the battery, wait a while, put it back, hold Volume Up or Down, don't let go then press the Power button until it boots up PhilZ Touch #
Do not try this on lock bootloader MTK devices as there has been confirmed cases that it will brick it, refer to here for more info.
---------------------------------------
This tool will auto-install Aroma FileManager & it is a known problem on some MTK devices that Aroma FileManager refuses to start & complains about E:Can't make /tmp/update_binary -> Installation aborted . . .
On Flip screen MTK device, Aromafm will always be flipped & the answer is here
Work around - Built-in to porting tool
Use the Auto mode first & it will auto make a backup of your current recovery.
Pull out the USB cable & use the Manual mode, copy recovery.img from BackUp-MTK-Recovery folder to Stock & it will ask you to plug-in the USB to PC.
Now open Stock/recovery/rmdisk/init.rc with Notepad++ & add the line as below & save it.
Plug-in USB cable to PC, press OK, select your device res & it'll auto install it.
Code:
mkdir /emmc
mkdir /system
mkdir /data
mkdir /cache
[COLOR="blue"][B]mkdir /tmp[/B][/COLOR] [COLOR="Red"]<- add this line to init.rc[/COLOR]
mount tmpfs tmpfs /tmp
chown root shell /tmp
chmod 0775 /tmp
Aroma FileManager shall work now.
---------------------------------------
On my friend's old ICS 4.0.4 MT6577 with 480x854 res, ported PhilZ Touch doesn't boot & later i found out its something to do with the kernel not supporting PhilZ res more than 320x480.
Work around - Built-in to porting tool
At Windows Explorer -> Show Hidden Files & Folders -> MTK_PhilZ -> bin -> extract out 240x320_bg.png from res.7z, rename it to stitch.png
Plug-in the USB cable & use the manual mode, select your device res & it will ask whether you have flipped screen.
Copy & paste extracted 240x320 stitch.png to Stock/recovery/rmdisk/res/images folder to replace it & answer the flipped screen question
At PhilZ Settings -> GUI Preferences -> Change Background -> Reset Koush Background
Trouble-shooting
Trouble-shooting the mount USB storage
Huge credits to suhas.holla, the fstab v2 AKA unified fstab has been demystified for MTK devices & mount both sdcard at PhilZ Touch is working perfecty now. . . :laugh:
i don't own every MediaTek devices out there so most probably some will not mount USB storage for both of the storage while at recovery b'cos of different voldmanaged path.
Updates - Built-in to porting tool
Refer to below on how to identify it & correct this problem.
Open a new Notepad & save the below to MTK_PhilZ folder for unpack/ repack of ported PhilZ Touch recovery.img.
MTK_unpack.bat
Code:
@echo off
cd %~dp0
chcp 1251
if (%1)==() (
echo Select image
goto end
)
setlocal enabledelayedexpansion
COLOR 0A
mode con:cols=65 lines=31
bin\sfk166.exe hexfind %1 -pat -bin /88168858/ -case >bin\offset.txt
bin\sfk166.exe hexfind %1 -pat -bin /FFFFFFFF1F8B08/ -case >>bin\offset.txt
bin\sfk166.exe find bin\offset.txt -pat offset>bin\off2.txt
bin\sfk166.exe replace bin\off2.txt -binary /20/0A/ -yes
if exist %~N1 rd /s /q %~N1 >nul
set /A N=0
:loop
FOR /F %%G IN (bin\off2.txt) DO (
if !N!==1 (
set /A ofs1=%%G
set /A N+=1
)
if !N!==3 (
set /A ofs2=%%G
set /A N+=1
)
if !N!==5 (
set /A ofs3=%%G+4
set /A N+=1
)
if `%%G` EQU `offset` (
set /A N+=1
)
)
FOR %%i IN (%1) DO ( set /A boot_size=%%~Zi )
echo.
echo - size of %1 %boot_size% byte
echo - kernel offset - %ofs1%
echo - ram_header offset - %ofs2%
echo - ram_disk offset - %ofs3%
echo.
del bin\offset.txt
del bin\off2.txt
md %~N1
echo - extracting kernel_header...
bin\sfk166.exe partcopy %1 -fromto 0x0 %ofs1% %~N1\kernel_header -yes
echo - extracting kernel...
bin\sfk166.exe partcopy %1 -fromto %ofs1% %ofs2% %~N1\kernel -yes
echo - extracting ram_header...
bin\sfk166.exe partcopy %1 -fromto %ofs2% %ofs3% %~N1\ram_header -yes
echo - extracting ram_disk...
bin\sfk166.exe partcopy %1 -fromto %ofs3% %boot_size% %~N1\ram_disk.gz -yes
echo - unpack ram_disk.gz...
bin\7za.exe -tgzip x -y %~N1\ram_disk.gz -o%~N1 >nul
echo - unpack ram_disk.cpio...
md %~N1\rmdisk
cd %~N1
cd rmdisk
%~dp0bin\cpio.exe -i <../ram_disk
cd ..
cd ..
copy %1 %~N1
echo.
echo - Done ^^!
echo.
pause
:end
MTK_pack.bat
Code:
@echo off
cd %~dp0
chcp 1251
if (%1)==() (
echo Select folder
goto end
)
setlocal enabledelayedexpansion
COLOR 0A
mode con:cols=60 lines=39
set pt=%~N1%~X1
echo %pt%
copy %pt%\ram_header %~N1\new_ram_with_header >nul
cd %pt%
%~dp0bin\chmod og=xr rmdisk
cd rmdisk
echo - pack rmdisk to cpio...
%~dp0bin\find . | %~dp0bin\cpio.exe -o -H newc -F ../new_ram_disk.cpio >nul
move ..\ram_disk ..\ram_disk_old >nul
copy ..\new_ram_disk.cpio ..\ram_disk
echo - pack rmdisk to gzip...
%~dp0bin\gzip -n -f ../ram_disk
echo - add header...
%~dp0bin\dd if=../ram_disk.gz >> ../new_ram_with_header
FOR %%i IN (../ram_disk.gz) DO ( set /A size=%%~Zi )
echo - new ramdisk %size% byte
%~dp0bin\sfk166 hex %size% -digits=8 >../../size.txt
FOR %%i IN (../../size.txt) DO ( set /A size=%%~Zi )
%~dp0bin\sfk166 split 1 ../../size.txt ../../1 >nul
FOR /F %%i IN (../../1.part7) DO (set a1=%%i)
FOR /F %%i IN (../../1.part8) DO (set a2=%%i)
FOR /F %%i IN (../../1.part5) DO (set a3=%%i)
FOR /F %%i IN (../../1.part6) DO (set a4=%%i)
FOR /F %%i IN (../../1.part3) DO (set a5=%%i)
FOR /F %%i IN (../../1.part4) DO (set a6=%%i)
FOR /F %%i IN (../../1.part1) DO (set a7=%%i)
FOR /F %%i IN (../../1.part2) DO (set a8=%%i)
echo %a7%%a8%>size.txt
echo %a5%%a6%>>size.txt
echo %a3%%a4%>>size.txt
echo %a1%%a2%>>size.txt
echo - add new size in header 0x%a1%%a2% 0x%a3%%a4% 0x%a5%%a6% 0x%a7%%a8%
%~dp0bin\sfk166.exe echo %a1%%a2% %a3%%a4% %a5%%a6% %a7%%a8% +hextobin ../../tmp1.dat
%~dp0bin\sfk166.exe partcopy ../../tmp1.dat 0 4 ../new_ram_with_header 4 -yes>nul
echo - make image...
%~dp0bin\mkbootimg.exe --kernel ../kernel --ramdisk ../new_ram_with_header -o ../new_image.img
del size.txt >nul
copy ..\new_image.img %~dp0\new_image.img
move ..\ram_disk_old ..\ram_disk >nul
cd ..
cd ..
del size.txt >nul
del tmp1.dat>nul
del 1.part*>nul
echo.
echo - Done ^^!
echo.
pause
:end
Just Drag&Drop ported PhilZ Touch recovery.img to MTK_unpack.bat to unpack it & Drag&Drop unpack recovery folder to MTK_pack.bat to repack it back. Disable UAC first.
Or you can also download the original Boot/Recovery repack utils for WINDOWS to unpack/ repack the ported PhilZ Touch recovery. Basically it operates exactly the same except for this porting tool, it is using the standalone 7za.exe instead of 7z.exe that requires the 7z.dll to operate.
Huge Credits to Russian Master Shifu Michfood for sharing his unpack/ repack MTK boot/ recovery algorithm or this porting tool would not have exists & you will have do all this on a NIX box . . . :laugh:
recovery.fstab for MT65xx
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/bootimg /bootimg emmc defaults defaults
/dev/recovery /recovery emmc defaults defaults
/dev/uboot /uboot emmc defaults defaults
/[email protected] /system ext4 ro,noatime wait
/[email protected] /cache ext4 noatime,nosuid,nodev,noauto_da_alloc wait
/[email protected] /data ext4 noatime,nosuid,nodev,noauto_da_alloc wait,encryptable=footer
# For MT6577
/devices/platform/mtk-sd.0/mmc_host/mmc0 auto auto defaults voldmanaged=sdcard0:[COLOR="blue"][B][SIZE="4"]6[/SIZE][/B][/COLOR]
/devices/platform/mtk-sd.1/mmc_host/mmc1 auto auto defaults voldmanaged=sdcard1:auto
Code:
# For MT65[B]xx[/B]
[COLOR="Blue"]/devices/platform/mtk-msdc.0/mmc_host/mmc0[/COLOR] auto auto defaults voldmanaged=sdcard0:[COLOR="blue"][B][SIZE="4"]6[/SIZE][/B][/COLOR]
[COLOR="blue"]/devices/platform/mtk-msdc.1/mmc_host/mmc1[/COLOR] auto auto defaults voldmanaged=sdcard1:auto
To identify your MTK voldmanaged path for sdcard -> adb shell find /sys -name mmc0. You don't need to include the first path /sys so it should start with /devices
To identify your internal sdcard partition no. -> adb shell cat /proc/dumchar_info & look at fat partition block /dev/block/mmcblk0p6 & update it accordingly . . .
Update it to fstab.${ro.hardware} too.
The correct way to check ${ro.hardware} -> adb shell getprop ro.hardware -> mt6577 then it should be rename to fstab.mt6577
------------------------------------------------
Updates - Built-in to porting tool
Some MTK don't use fat mount points for Internal sdcard then this tool will fail to identify it & ported PhilZ Touch will not boot/ bootloop . . .
Code:
/devices/platform/mtk-msdc.0/mmc_host/mmc0 auto auto defaults voldmanaged=sdcard0: [COLOR="Red"]<- Empty[/COLOR]
/devices/platform/mtk-msdc.1/mmc_host/mmc1 auto auto defaults voldmanaged=sdcard1:auto
Solution - Put a # at the beginning of that line or just delete it & it'll boot . . .
Code:
[B][SIZE="3"][COLOR="Blue"]#[/COLOR][/SIZE][/B]/devices/platform/mtk-msdc.0/mmc_host/mmc0 auto auto defaults voldmanaged=sdcard0: [COLOR="Red"]<- Empty[/COLOR]
/devices/platform/mtk-msdc.1/mmc_host/mmc1 auto auto defaults voldmanaged=sdcard1:auto
------------------------------------------------
To identify USB voldmanaged mount points for Internal SD -> adb shell su -c "ls -R" > c:\users\YOUR USER NAME\desktop\usb.txt
Look for anything usb in it & try it at the fstab.${ro.hardware} & also update it to recovery.fstab too. Both must be identical or it will not work.
An example below, confirmed by shoxxy that can be view at PhilZ Touch -> Install Zip but doesn't mount it at mount USB storage.
Code:
/devices/platform/mt_usb/usb1 auto auto defaults voldmanaged=usbdisk:auto
Also look for various example here on voldmanaged for USB storage & hopefully someone will get it working one day.
if yours is a /data/media device then it would not work . . .
Refer to here credits to RD chrmhoffmann
As mentioned many times, i don't own all MTK devices out there so some features might not work. To fix it & to learn more about modding recovery refer to my Master Shifu thread here & here . . . :good:
When everything fails then try your hands on building one yourself with the optional build flags here for your MTK . . .
This is awesome man....
Yeah...Finally a support thread of philz touch for mediatek devices ...Great initiative by master @yuweng for bringing simple tool to install philz touch on many mediatek devices
Sent from my A250 using Tapatalk
Hi there. Does it work with the Jiayu G5S ?
Is there a simple guide?
Gesendet von meinem JY-G5S mit Tapatalk
Bro, everything is already stated clearly at post #1 to 5, make backup x3, double-click PhilZ.exe & follow on-screen instructions, that's the guide . . .
manual porting ?
SIR Thanks a lot for creating the tool :good:
BTW I tried on my mt6577 in both the ways but it says recovery.img is too large and it is aborting
my question is How to do manual porting for this recovery as we did for carliv touch recovery ( i tried to merge the A9,7z with my ramdisk but it didnt worked)
so pls assist me Sir :crying:
Updates - Built-in to porting tool
Temporary work around is to use the same technique at post #3 most bottom . . . When ask whether you have flipped screen, that is the time to delete the files. Binary files at Stock/recovery/rmdisk/sbin as listed below are safe to be deleted to save some space. List below starts with less critical to critical & i have absolutely no idea what will happened in the long run but definitely it'll boots.
Most of them are utilities for formatting the sdcard while at recovery. Try one at a time starting with Item 1, if still it complains about oversize then delete 1+2 , 1+2+3 & so on until it auto-install . . . :fingers-crossed:
Parted
sdparted
fb2png
mount.exfat
adbd
e2fsck & tune2fs
Updates
You can also try tinypng.com the tips from EnerJon to resize all images at Stock\recovery\rmdisk\res\images to a much smaller size that might just be enough for it to boot PhilZ Touch on your MTK . . . :fingers-crossed:
--------------------------------
Refer to updates of the updates here . . . :good:
hi Bro
thanks for sharing this TUT
but, i can't see download ling of Philz.exe
can give me Download Link ?
thanks ...
Little problem
Hi
First, thank you for porting Philz cwm recovery to our mediatek devices.
I have a zte blade q mini rooted with framaroot but when i want to use your tool, it says ro.secure=1 so no way to port recovery for me.
Any idea or workaround ?
Thank you
ladalgigi
---------- Post added at 02:59 PM ---------- Previous post was at 02:58 PM ----------
You have to go on the top of OP, you can see Discussion and Download tab...
Update info . . .
i3ooter said:
but, i can't see download ling of Philz.exe . . . can give me Download Link ?
Click to expand...
Click to collapse
ladalgigi said:
ro.secure=1 so no way to port recovery for me. Any idea or workaround ?
---------- Post added at 02:59 PM ---------- Previous post was at 02:58 PM ----------
You have to go on the top of OP, you can see Discussion and Download tab...
Click to expand...
Click to collapse
i donno why so many cannot see the Downloads, updated info here . . .
For ro.secure=1 solution is also at the same post & since you already gain root, refer to here . . . :good:
My experience is that you'll have to EXIT MTK Droid Tools first then start the PhilZ.exe or both will be conflicting using the adb shell at the same time . . .
Updates
To others facing the same problem & still you cannot make ro.secure=0 then follow the guide here on how to upload your boot.img & let MTK Droid Tools automatically make the boot.img to ro.secure=0 for you . . . :good: You can also let MTK Droid Tools automatically make & install CWM for you first then use PhilZ.exe to updates it to PhilZ Touch . . . :laugh:
WARNING
Be careful, wrong steps & you'll end up with a soft-brick MTK . . . Make a Factory ROM backup first, read & continue reading then only hands on !
Hi yuweng,
I have root shell right.
but the program says I need root shell.
what can I do?
see my attached file
Then i guess you have no choice but to upload your boot.img & make it ro.secure=0 then . . . :laugh: Or try the manual mode if you have your stock recovery.img with you . . . :fingers-crossed:
Hi !
I tried the manual mode an put my recovery.img in the right folder.
But it gets the same error.
How i can make my boot.img to ro.secure=0 ?
Hi all.
Now i have a Boot.img with ro.secure=0 (Thank you to hanuma)
Now i have the next Problem.
After installing, (Congratulation now you have PhilZ.... Boot into recovery? Yes or No)
And he cant't boot into the recovery.
Only Bootlogo.
Phil's CWM, supports MTK for some time now, i got some issues last time i checked (source built)
Can you please check, if the backup / Restore of boot.img / system are done correctly ?
Regards
Popey900 said:
And he cant't boot into the recovery.
Click to expand...
Click to collapse
In the past, users feedback the same for my other porting tool & then they manually installed it & it works . . . Ported recovery.img is at PhilZ folder.
If still it doesn't boot then upload your stock recovery.img here & i'll have a look at it . . . :fingers-crossed:
superdragonpt said:
Can you please check, if the backup / Restore of boot.img / system are done correctly ?
Click to expand...
Click to collapse
Hey, and i though you followed the news back at the CTR thread then you would've know this . . . :laugh:
CWM/ PhilZ Touch never boots on MTK since last year on the release of cm10.2 & cm11 b'cos we are not using fstab v2 . . .
And just got PhilZ Touch fully supported on MTK devices, Phil3759 just a few days ago announces retirement & releases all the close source to the world . . .
Related
Old Tool
Added on Mar 05, 2014
Updated CTR v2.2 for MTK devices with ubifs ONLY
And Thanks to dhinesh77 for countless beta-testing & most importantly, Master Shifu carliv for looking into those ubifs source code to make it work on MTK devices....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download link here...
Solution to cannot see whole sdcard is here by Master Shifu himself, it is actually a new feature/ function... :laugh:
----------------------------------------------------------
Added on Jan 27, 2014
Updated CTR v2.2 Recovery for MT6575,15, 77, 17, 89, 82, 88, 92
MT6572 (ext4 only, ubifs not supported)
Pls support by donation or at least drop your thanks here to encourage Master Shifu for further development...
Download link here
----------------------------------------------------------
Added on June 02, 2014
New Porting Tool CTRv-1.4 for ext4 devices ONLY. . .
Known problems : Touch not working on some MTK devices . . .
Any bugs report here . . .
----------------------------------------------------------
Added on June 10, 2014
New AIO Porting Tool Easy Magic CTR v2.4 Installer for MTK for ALL MTK Cortex-A9/ A7 devices ONLY with either mtd, emmc, ubifs or custpack partition . . .
Any bugs report here . . .
Updates
Thanks to surfturtle for reporting . . .
Workaround : Use Manual mode & select 720x1024 that is the screen res for 720x1280 . . .
This is an AIO porting tool so go ahead & try the differrent res at Manual mode, the unpack/ repack feature, play around with it & you'll learn what is needed for porting custom recoveries . . .
----------------------------------------------------------
Added on June 17, 2014
Users using XP & 720x1280 MTK devices use this fix . . .
----------------------------------------------------------
Added on July 01, 2014
CTRv2.5 refer to here . . .
----------------------------------------------------------
Notice to annoying n00bs & newbies
Most of your questions are already answered on this thread so pls read it...
1) Either your MTK is still ro.secure=1 then use this method here then EXIT/ CLOSE it first then re-start the porting tool...
2) i've already put in alot of error checking to make sure this porting tool works, either the Auto or Manual port, it will leave behind Ported-CTR folder then manually install it via SPFT when it fail to auto install.... Most probably why it fail to install is b'cos you use SuperSu did you bother to look at your MTK device & grant access to Root Shell... There has been cases where the stock recovery is already corrupted then this tool will also port a corrupted CTR too. Re-install your stock 3e recovery.img & make sure you can boot into it then only use the porting tool again or just use the manual port... The differences is Auto will upload whatever recovery already at your device be it older CWM or TWRP & it will repack it with CTR ramdisk. While Manual will use whatever at your stock 3e -> factory_init.project.rc, meta_init.modem.rc, ueventd.rc & etc... Refer to this by Master Shifu carliv... :good: This tool has no log b'cos it is actually a simple copy & paste program, thats what it actually do.... :laugh:
3) Pls bear in mind that this porting tool has been downloaded by many & confirmed working BUT i can't guarantee that it will work flawlessly on your MTK device so continue trying & report back the solution if you found one...
4) This has been mentioned many times on this thread, if you really can't get it to work then don't just say your porting tool doesn't work...
Instead list out everything then it'll be easier to trouble-shoot
a) What OS you are using on the PC & your MTK...
b) Did you disable UAC & Anti-Virus on your PC
c) Did you execute the porting tool at C:\ drive if you're using XP else then at your Desktop READ what the porting tool says & it will ask you to wait then wait for it to continue without pressing the OK button...
As said many times, this porting tool uses Russian Master Shifu Michfood Repack Utils Huge Credits to him, it is actually DOS program with cygwin dll working at the back so all DOS limitation still applies such as it will ONLY operate properly when it is executed at the Desktop on latest OS... Tested working on XP to 8.1
As much info as possible then it'll be easy to identify where it goes wrong & did you bother to read 5 to 10 pages from the back then you would have know what is the latest story...
Last but not least, i didn't compile CTR so any features not working / bugs found pls report it here BUT again, read the whole thread first as most already answered at that thread...
Q&A
1) Touch not working, refer to here...
2) MTK Alcatel devices refer to here & here... Supported on CTRv2.4
3) All MTK devices supported except this...
4) Inverted screen solutions -> Compile your own
5) CTRv2.5
Nice one bro.....will be helpful for many.......!!:good:
Good to see you back......!
--------------------
P.S: Thinking of creating a Multi-tool for MTK6573.......what are features that can be added bro ??
Yo, Bala bro, been quite busy with work, until now only manage to finish this tut...
Yeah, i was thinking about that too, to mod dsixda's android kitchen just for MT6573 platform that includes Bruno Martins's unpack/ repack boot.img, unpack/ repack recovery & port it to CWMR like this tut, replace a2sd with data2ext or ad2sdx; only this two mod stable on MT6573 platform so far that i have tested...
actually did try but give up half way as my scripting skill is still at novice level...
did read it on some other forum that someone is actually doing that too but i never see it got release though...
Well i guess we need dsixda expertise to be able to do that but he is retired now...
Added on Sept 04, 2012 Info Update
Dark Tremor's a2sd/ Apps2sd works well on MT6573 platform after all...
i was using the last version 2.7.5.3 Beta 04 all this while & i always use a2sd datasd all the time & it FC all apps after a few weeks of using/ sometimes a few days even after a fresh install...
After all, DT_a2sd/ apps2sd is actually apps to sd & i always push it as data2sd...
Only until recently that i play with Android Kitchen, use it to extract my system.img & update it with its built-in Darktremor Apps2SD version 2.7.5.2, it works extremely well because 2.7.5.2 doesn't support a2sd datasd feature...
So guys, if you are using DT_a2sd beta 4, don't use the command a2sd data2sd instead use a2sd cachesd...
You can checkout my other post here
great tools and description
hello y2yu,
Glad you find it informative...
According to this site, there will be another 2 new cpu after MT6575/ MT6577... (use google chrome for translation)
This means MT6573 is 5 generation behind MT6588 & it is still unexploit with all info/ tools scattered all over the web...
Thats where i decided to compile all these info & put it here... :good:
Now that i check, i've bought my first mediatek back in 2008...( never knew it until i check it just now ) :silly: It has serve me well for almost 2 years in spite of dropping, a few times from 8 feet height when i was on a ladder & it still works ! It was the last drop that spoilt the mic & render it unuseful. It can still make & receive call to date but the other side can't hear what i say...
At that time, made in china phone was famous for its extra loud speaker/ ringtone but doesn't support android back then...
haha, enough of history, have you manage to port CWMR to your MT6573 ? In fact, i have manage to create a plugin for dsixda's Android Kitchen which can port CWMR to any MT6573 with a few copy & paste features just like Android Kitchen... :good:
Still testing it, may be you would like to be the first beta tester...
Thank you so much for this. I managed to "port" cwmr to my phone without going through the build hassle. Thanks also go to koush for the builder. I had downloaded the source but hadn't managed to completely set up my build environment as there are a couple of gotchas to iron out for ROM development.
Anyway, this serves as a good precursor to actually porting a custom recovery to new devices. Just one problem - cwmr does not recognise any of the hardware buttons for the select action. I can only scroll. The phone has 2 side buttons for volume control, 1 power button on top, and at the bottom on the home row there is a home button, the menu (these 2 also scroll, in stock recovery the home button selects), the previous, and the search. [1][2]
Do you happen to have any cure for this? Is there some place I could remap hardware buttons? One more thing. I made sure root shell access was configured but adb shell will not work (insufficient permissions). Also, adb devices, as is the case for stock recovery, will return question marks. Any idea?
edit: It is important to mention that the flashing had some errors:
Code:
/mnt/sdcard # flash_image recovery recovery.img
mtd: read error at 0x00000000 (Out of memory)
mtd: read error at 0x00020000 (Out of memory)
mtd: read error at 0x00040000 (Out of memory)
mtd: read error at 0x00060000 (Out of memory)
mtd: recovery successfully wrote block at 0x00000000
mtd: recovery successfully wrote block at 0x00020000
mtd: recovery successfully wrote block at 0x00040000
mtd: recovery successfully wrote block at 0x00060000
... <snip>
... <snip>
... <snip>
mtd: recovery successfully wrote block at 0x00420000
mtd: recovery successfully wrote block at 0x00000000
The flash of the stock recovery goes without any error.
[1] http://symphony-mobile.com/index.php?route=product/product&path=63&product_id=75
[2] http://www.tinno.com/en/productinfo.aspx?proid=128
u r most welcome, jason...
i think the button key map is actually built inside /sbin/recovery so there is nothing much you can do about it unless you build the whole recovery from sources & change it from there...
i do have feedback from fellow xda member that has the same problem flashing recovery with error however he reported back, all menu options at cwm works fine...why don't you use mobileuncle tools, its easier that way...found another flashing tool for ZTE, reported unknown image but it works fine on MT6573 platform too...
As for the adb shell at cwmr, it should work by default & if it doesn't then you have the check default.prop & make sure ro.secure=0 As for stock recovery, mine doesn't work at all...
i think after 6.0.0.3 version, ported cwmr has the camera button as enter key for MT6573 if you built it from koush builder...
yuweng said:
u r most welcome, jason...
i think the button key map is actually built inside /sbin/recovery so there is nothing much you can do about it unless you build the whole recovery from sources & change it from there...
i do have feedback from fellow xda member that has the same problem flashing recovery with error however he reported back, all menu options at cwm works fine...why don't you use mobileuncle tools, its easier that way...found another flashing tool for ZTE, reported unknown image but it works fine on MT6573 platform too...
As for the adb shell at cwmr, it should work by default & if it doesn't then you have the check default.prop & make sure ro.secure=0 As for stock recovery, mine doesn't work at all...
i think after 6.0.0.3 version, ported cwmr has the camera button as enter key for MT6573 if you built it from koush builder...
Click to expand...
Click to collapse
Crap, then I have to dig through the sources really hard. This phone has no camera button.
If I'm not wrong the last time I checked "mobileuncletools" uses flash_image. Either that, or nandwrite, or failing that, dd. Coming from a Linux and UNIX background I'm more comfortable with the simpler underlying commands rather than a complex front-end wrapper around those commands. NAND images have some peculiarities so we kinda have to deal with it I guess.
I had triple-checked that ro.secure != 1 I think this is probably a hardware issue where during recovery there is no bridging interface exposed.
Anyway a couple of other things related to the documentation side of this:
* Why not just upload your own recovery.fstab to the builder instead of editing it later?
* Changing the fstab is only needed for those who have an ext-sd, i.e. a second partition for the memory card
* The bin/ folder is empty, and the lib/ folder only contains the ext2 module, so if above not needed, this is also not needed
So in the end, I think we can simply advocate use of the builder as-is. What do you think of putting up a list/database of MTK phones and some details? Like rootable or not, cwmr available or not, etc. I think RootzWiki would be a good place for that?
AFAIK, most readers at xda are non-registered, only when they are stuck somewhere or they really needed help then only they'll register & start posting; that is including me !
You can see my other post where it is nearing to 300 over downloads while the MTK phones list feedback from users is less than 10 !
AFAIK, all MT6573 are root-able & all needs data2sd mod. There are so many apps & games at google play, MT6573's 256 or 512MB internal memory gets filled up pretty fast !
On adb shell, did you have all the three adb files (adb.exe, AdbWinApi.dll, AdbWinUsbApi.dll) & on linux, i use ./adb shell to get it to work...
yuweng said:
AFAIK, most readers at xda are non-registered, only when they are stuck somewhere or they really needed help then only they'll register & start posting; that is including me !
Click to expand...
Click to collapse
Very true.
AFAIK, all MT6573 are root-able & all needs data2sd mod. There are so many apps & games at google play, MT6573's 256 or 512MB internal memory gets filled up pretty fast !
Click to expand...
Click to collapse
Indeed. I actually want to try just bind-mounting data to a second partition, but I don't know whether init scripts are supported on this phone (would be better instead of editing the init itself). But I will also try this data2sd mod, haven't looked at it yet. After clearing out loads of preincluded apps I was happy for a while, but am now running out of space again!
On adb shell, did you have all the three adb files (adb.exe, AdbWinApi.dll, AdbWinUsbApi.dll) & on linux, i use ./adb shell to get it to work...
Click to expand...
Click to collapse
Actually I have the Android SDK set up already on my system, so everything is conveniently there including adb. I will have to find some other day to troubleshoot why the bridge would not work during recovery.
re-packing error
Now I am doing this on Xubuntu so maybe that's why it doesn't work:
I get the following when trying to repack:
MTK-Tools by Bruno Martins
MT65xx repack script (last update: 31-07-2012)
Repacking recovery image...
Ramdisk size: gzip: unpack/ramdisk-repack.cpio.gz: No such file or directory
Could not open ramdisk file: ramdisk-repack.cpio.gz
Any ideas?
Unpacking is no problem.
This Android Kitchen plugins only work with cygwin...
Even unpacking shouldn't have work because mkbootimg & 7z is windows exe...
i'm in the mid of modding it so that it can work on linux too...
Thanks for your reply yuweng. 7z is available as a plugin for Ubuntu too.
In the mean time I will try another website which I already posted a link before.
http://www.slatedroid.com/topic/32450-how-to-unpack-repack-systemimg-properly-using-linux/
breaky9973 said:
Now I am doing this on Xubuntu so maybe that's why it doesn't work:
I get the following when trying to repack:
MTK-Tools by Bruno Martins
MT65xx repack script (last update: 31-07-2012)
Repacking recovery image...
Ramdisk size: gzip: unpack/ramdisk-repack.cpio.gz: No such file or directory
Could not open ramdisk file: ramdisk-repack.cpio.gz
Any ideas?
Unpacking is no problem.
Click to expand...
Click to collapse
It will work on any GNU/Linux as long as you have the proper tools installed. Almost all tutorials for Android "modding" are Cygwin-based, which basically emulates a GNU system on Windows (so you can skip all parts about "setting up" anything). Here your file does not exist, please double-check that it does. This is a perl script which utilizes gzip, gunzip, and cpio. Make sure these are available as well.
Btw, this is independent of Android Kitchen. You don't need that if you're using the builder. Android Kitchen is just a front-end to modifying ROMs. So skip the Kitchen for now and do this manually.
Again, the "another website" you link to is about backing up real filesystems (which the boot and recovery partitions are not). See: http://forum.xda-developers.com/showthread.php?t=1744265&page=2
yuweng: What benefit does using the Android Kitchen have over simply using the builder? All you need is a rebuilt /sbin/recovery along with the resources in /res, and optionally an ext2.ko if it does not exist on the phone itself.
This is just a simple tool for n00b/ newbie...
i was a n00b six months ago & even now my android knowledge is still half empty...
As the first post says, there are hundreds if not thousands of android phone based on MT6573 SoC design, each with their own recovery.img-kernel.img & AFAIK, non is compatible for use on others...
i simply provided a plugins based on Android Kitchen so that even a n00b/ newbie can port cwmr to their MT6573 simply by just drag & drop files to it... You are a programmer by profession i presume, so this is chicken feet to you but to a n00b/ newbie they don't no even where to start, like i did... :laugh:
you'll be surprise if i tell you the top download of my tuts is rooting & installing busybox !
As for the builder, you still need to unpack it, copy few files over & repack it with bgcngm's MTK-tools for it to work on MT6573...not alot of n00b/ newbie know how to do that !
the intention of this plugins is to be able to port cwmr to any mt6573 based android phone...
yuweng said:
This is just a simple tool for n00b/ newbie...
i was a n00b six months ago & even now my android knowledge is still half empty...
As the first post says, there are hundreds if not thousands of android phone based on MT6573 SoC design, each with their own recovery.img-kernel.img & AFAIK, non is compatible for use on others...
i simply provided a plugins based on Android Kitchen so that even a n00b/ newbie can port cwmr to their MT6573 simply by just drag & drop files to it... You are a programmer by profession i presume, so this is chicken feet to you but to a n00b/ newbie they don't no even where to start, like i did... :laugh:
you'll be surprise if i tell you the top download of my tuts is rooting & installing busybox !
As for the builder, you still need to unpack it, copy few files over & repack it with bgcngm's MTK-tools for it to work on MT6573...not alot of n00b/ newbie know how to do that !
the intention of this plugins is to be able to port cwmr to any mt6573 based android phone...
Click to expand...
Click to collapse
yuweng, and I thought you were the programmer! (other than bgcngm I see you as our local MTK expert)
Seriously, we are all noobs. That was my main concern :silly: Android Kitchen interface is command-based whereas the builder you just need to upload an image and you will get an image in return.
So do you mean using Android Kitchen there is no need to go through setting up Cygwin, repack, unpack, etc.? Just download the Kitchen, enter some commands, and you will have a recovery.img which you can flash directly?
i'm a half-cook programmer...
yaya, but you need to setup java, Android Kitchen & the plugins scripts will do everything... :laugh: That is for linux...For windows, you already know...
As for the builder, it works on major brands where it can be flash directly but not on mt65xx...
Ahh OK in that case I do suppose the Kitchen would be much simpler.
Ya, the MTK partitions and images are not the same as those of other devices. That's why Bruno wrote the script to help us
jason_cheng said:
yuweng, and I thought you were the programmer! (other than bgcngm I see you as our local MTK expert)
Seriously, we are all noobs. That was my main concern :silly: Android Kitchen interface is command-based whereas the builder you just need to upload an image and you will get an image in return.
So do you mean using Android Kitchen there is no need to go through setting up Cygwin, repack, unpack, etc.? Just download the Kitchen, enter some commands, and you will have a recovery.img which you can flash directly?
Click to expand...
Click to collapse
Hi Jason,
I have cpio and can execute perl scripts. gzip and gunzip are setup too. The script just cannot find the file ramdisk-repack.cpio.gz and I cannot find it anywhere.
Maybe the dump of the recovery.img was not good. I will try again.
*UPDATE*
The mkbootimg executabe I download was not correctly installed. Now the script finishes without error.
However the recovery.img doesn't do anything. I think I have to look for another mkbootimg or compile one from source myself...
For people who are interested to try the Ubuntu way:
Unpacking:
sudo perl ./unpack-MT65xx.pl recovery.img
Re-packing:
sudo perl ./repack-MT65xx.pl -recovery ./recovery.img-kernel.img ./recovery.img-ramdisk ./recovery.img
I will attach the mkbootimg once I succeed
i had got lenovo a1000-g for which i spend a lot of time for searching things like recovery , rom, flashing rom, back up rom , custom rom etc
so i thought to share the results with you for saving your time
as usual here disclaimener
I OR THIS SITE IS NOT RESPONSIBLE FOR bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find in the thread here and the links given by me before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software." CONTINUE AT UR OWN RISK
rooting
PROCESS 1 . FOLLOW THE LINKS GIVEN BELOW FOR LINUX
http://forum.xda-developers.com/showthread.php?t=2406916
http://forum.xda-developers.com/showpost.php?p=40188901&postcount=275
ONLINE TOOL FOR CONVERTING HEX TO DECIMAL
http://www.binaryhexconverter.com/hex-to-decimal-converter
COMPARE THE ABOVE TWO PROCESS AND PROCEED ROOT
or
PROCESS 2. USING KINGO ROOT SOFTWARE ONE CLICK ROOT AND UNROOT IN WINDOWS
http://forum.xda-developers.com/showthread.php?p=46794736
2.EXTRACTING STOCK ROM , STOCK RECOVERY, STOCK KERNEL(LINUX) for rooted devices ( FOR NON ROOTED U CAN GET BY FOLLOW THE STEPS LIKE ROOTING METHOD IN PROCESS 1 )
BE SURE THAT UR SD CARD IS HAVING 1 GB OF FREE SPACE ATLEAST
EACH STEP TAKES SOME TIME UNTILL THE NEXT PREFIX ARRIVES DONT PROCEED TO NEXT STEP , FOR EG FOR EXTRACTING SYSTEM.IMG IT MAY TAKE NEARLY 1HOUR SO BE PATIENT
STEP 1
cd /home/balu/adt-bundle-linux-x86-20130729/sdk/platform-tools
(HERE HOME BALU IS WHERE I LOCATED THE ADT BUNDLE, SO CHECK URS AND GIVE CORRECT DIRECTORY)
STEP 2
sudo ./adb devices
IT WILL SHOW LIST OF DEVICES LIKE
XXXXXXXXXXXXXXXXX DEVICE (IF NOT SHOWN CHECK IN GOOGLE)
STEP 3
adb shell
if adb is installed ok if not install it by the command displays after giving the above command
STEP 4
su
(in ur tablet super su asks permission give permission)
STEP 5
cat /proc/dumchar_info
the above command gives below results
Part_Name Size StartAddr Type MapTo
preloader 0x0000000000040000 0x0000000000000000 2 /dev/misc-sd
dsp_bl 0x00000000005c0000 0x0000000000040000 2 /dev/misc-sd
mbr 0x0000000000004000 0x0000000000000000 2 /dev/block/mmcblk0
ebr1 0x0000000000004000 0x0000000000004000 2 /dev/block/mmcblk0p1
pmt 0x0000000000400000 0x0000000000008000 2 /dev/block/mmcblk0
nvram 0x0000000000500000 0x0000000000408000 2 /dev/block/mmcblk0
seccfg 0x0000000000020000 0x0000000000908000 2 /dev/block/mmcblk0
uboot 0x0000000000060000 0x0000000000928000 2 /dev/block/mmcblk0
bootimg 0x0000000000600000 0x0000000000988000 2 /dev/block/mmcblk0
recovery 0x0000000000600000 0x0000000000f88000 2 /dev/block/mmcblk0
sec_ro 0x0000000000600000 0x0000000001588000 2 /dev/block/mmcblk0p2
misc 0x0000000000060000 0x0000000001b88000 2 /dev/block/mmcblk0
logo 0x0000000000300000 0x0000000001be8000 2 /dev/block/mmcblk0
expdb 0x0000000000200000 0x0000000001ee8000 2 /dev/block/mmcblk0
android 0x0000000028a00000 0x00000000020e8000 2 /dev/block/mmcblk0p3
cache 0x0000000017800000 0x000000002aae8000 2 /dev/block/mmcblk0p4
usrdata 0x0000000020100000 0x00000000422e8000 2 /dev/block/mmcblk0p5
fat 0x0000000083718000 0x00000000623e8000 2 /dev/block/mmcblk0p6
bmtpool 0x0000000001500000 0x00000000ff9f00a8 2 /dev/block/mmcblk0
Part_Name:smileytongue:artition name you should open;
Size:size of partition
StartAddr:smileyfrustrated:tart Address of partition;
Type:Type of partition(MTD=1,EMMC=2)
MapTo:actual device you operate
STEP 6
if above partitions are same give the same values GIVEN BELOW ,if not convert them using the hex to dec tool given abovE
FOR RECOVERY
dd if=/dev/block/mmcblk0 bs=1 skip=16285696 count=6291456 of=/mnt/sdcard2/recovery.img
WAIT AFTER EVERY STEP IN ORDET TO COMPLETE U WILL GET RESULT LIKE BELOW AFTER EVERY STEP
681574400+0 records in
681574400+0 records out
681574400 bytes transferred in 5608.838 secs (121517 bytes/sec)
[email protected]:/ #
FOR BOOT OR KERNEL
dd if=/dev/block/mmcblk0 bs=1 skip=9994240 count=6291456 of=/mnt/sdcard2/recovery.img
FOR SYSTM.IMG OR ROM
dd if=/dev/block/mmcblk0 bs=1 skip=34504704 count=681574400 of=/mnt/sdcard2/recovery.img
STEP 7
exit
exit
exit
installing custom recovery, alegro rom
installing custom recovery
follow the link to get the recovery file
http://translate.google.co.in/trans...+lenovo+a1000&client=ubuntu&hs=guw&channel=cs
back up ur whole rom by using mtk droid tools and recovery as given in links below before doing any modifications even it is small
custom rom (allegro rom
follow the link
http://translate.google.co.in/trans...ent=ubuntu&hs=3dH&channel=cs&biw=1317&bih=637
changing frame work like changing colours of notification bar etc,
follow the link to change frame work to tablet, changing colours of notification bar, transparent status bar, colour of status bar , etc
http://forum.xda-developers.com/showthread.php?t=2316070
u can also ger tablet ui by installing tablet ui module
INCREASING INTERNAL STORAGE FROM 1.5 GB TO YOUR WISH
FOLLOW THE LINK
GET A MEMORY CARD ATLEAST OR ABOVE CLASS 6
http://forum.xda-developers.com/showthread.php?t=919326
mounting ntfs formated drive i.e hard drives
for mounting hard disks without externel power , i.e connecting directly to tablet without mediator connecting of externel power usb ur tab should pocess full charging atleast above 80 percent, never connect hard disks at low battery level if connected ur tab will heated up and there is a loss of mother board , if u r connecting using externel power source tab may have less charging ,complete as fast as possible ur work , dont let the power to drain below 50 or 60 percentage
1.root is required , so root first as mentioned in previous posts]
2. download the app https://play.google.com/store/apps/details?id=net.shajul.usbotg
3. open the app and give su permission ( first time is enough)
4. connect the otg cable to the tab first with out connecting hard disk to the cable
5.connect the hard disk to otg cable ,open usbotg helper app
6. press mount
7.open fileexplorer go to the sdcard u can find usbotg drives folder
8. open it explore the hard disk
9. after completion of usage go to usbotg app and press unmount
for errors in sp flash tool visit this page
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
back up rom using sp flash tool before modify
http://forum.xda-developers.com/showthread.php?t=2160490
sp flash tool tutorial
http://forum.xda-developers.com/showthread.php?t=1982587
swaping internal memory with sd card for increasing memory to install big games
follow the link
http://forum.xda-developers.com/showthread.php?t=1991583
here the link for modified void http://www.4shared.com/file/4gPzUILT/vold.html
here the link for stock void http://www.4shared.com/file/y9RIoWNf/vold.html
original boot animation
http://www.4shared.com/folder/p1UDAQDy/boot_animation.html
system/lib/egl
http://www.4shared.com/folder/HAzPMsqA/lib.html
for now only this if i found more i will add
thanks xda for all this
press thanks if i saved ur time
drivers for lenovo a1000
drivers and installation of drivers
drivers link http://lenovo-forums.ru/Files/OS/A390/MTK65xx_Driver.zip
installation of driver link http://lenovo-forums.ru/topic/1120-установка-драйверов-на-пк-для-смартфонов-lenovo-ideaphone/
ok google command in tab
download launcher from here i.e google now launcher from here or u can download any where
http://forum.xda-developers.com/nexus-4/themes-apps/apps-google-experience-launcher-gel-app-t2529594
update google search to latest version
install xposed installer and app settings module u can get from here
http://forum.xda-developers.com/showthread.php?t=1574401
procede the procedure strictly as shown in the thread
install app settings module from xposed installer
open app settings go to launcher app
on first then u will see some settings
change screen dpi to 1000*1600
now save
check the clear defaults of default launcher
now press home button and select google now launcher and enjoy
trouble shooting of your tablet
some people are saying that tablet is switching off and doesnt startback , if u have same problem then try this methods
1. may be ur tablet drained the battery ,charge it for a day and try to restart, (dont press volume+ button along with power button that takes to recovery )
2. if u installed a crappy app which u thought will stop ur tab to restart then press power+(vol+)+(vol-) simultaneosly , tab will restart to safemode in which no app will start , go to apps and uninstall app , and restart
3. if tab is not starting after charging then pressreset button.jpg the small button which is in the hole below the memory card using pin , this is reset button ur tab will restart ,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. if pc does not detects in low power stats and does not restart follow this link http://mobilesupport.lenovo.com/en-us/products/a1000_tablet/faq/ht079486
5. if that too doesnt work go to service centre, or else install stock rom as mentioned above post
stock rom for a1000g indian version
http://www.4shared.com/archive/-8BdLLFzba/system.html
stock recovery
http://www.4shared.com/file/aRPtmTDoce/recovery.html
all the best
that was really nice,thanks for the resources.:good:
But i need the original boot animation of a1000,please help :fingers-crossed:
i had given 4shared link for downloading boot animation
http://forum.xda-developers.com/showpost.php?p=48368459&postcount=2
i installed "Xposed TabletUI[1.0] and its works!!!, but when i press the task manager/switcher soft key, i get a force close from system ui, any help or advice?
is there another way to enable tablet ui? or any another mod, best regards
as i said in lenovo forum download xblast module and install
nameisbalu said:
as i said in lenovo forum download xblast module and install
Click to expand...
Click to collapse
oops, i bricked my device, i am stuck on the boot logo, is there any way to push build.prop from the stcok recovey? or flash twpr from the sock recovery? best regards
how does it bricked , what procedure you followed , if u say that i may help you
Source code compilation lenovo A1000 L-F
Hello All
Did Any one proceed with the compilation of source code for lenovo A1000, my version is A1000L-F but the source code on the lenovo site ,did not compile ,Missing Makefiles.
Any Ideas??
Thanks
it is not full , it will not compile, lenovo should release new source code which compiles
Lenovo A1000 G kernel config
I would like to try compile a kernel for my A1000-G but have so far unable to locate any appropriate .config file. I have downloaded kernel source and also searched my device root and /proc directories with no luck.
I have compiled and released kernels for my Samsung Galaxy Tab 7.7, so do have some knowledge, but none of MTK etc. It appears I'll require toolchain gcc version 4.6.x-google to compile.
This is my first Lenovo (portable) device, and seems they don't fully comply with Android GPL? config is part of source, and without it unable to build
A1000lf said:
Hello All
Did Any one proceed with the compilation of source code for lenovo A1000, my version is A1000L-F but the source code on the lenovo site ,did not compile ,Missing Makefiles.
Any Ideas??
Thanks
Click to expand...
Click to collapse
Guys any ideas about A1000L-F drivers? I want to use it with adb in win7 64bit. Tried the solution in the 1st post about the drivers but did'nt work. Any tips?
Hello everyone. My tablet's micro USB has some issues since almost a month ago (It's a Lenovo A1000-F). At the beginning it stopped charging the battery so I went to technical support and it was fixed, but unfortunately I didn't notice until a week ago, when I was flashing the Stock ROM, that my PC (with Windows 7 x32) doesn't recognize my tablet (via USB). I don't know why, maybe it's software or maybe hardware.
I've tried to create a flashable zip from the stock ROM. according to this XDA's tutorials:
http://forum.xda-developers.com/showthread.php?t=2276056
http://forum.xda-developers.com/showthread.php?t=2566243
But I've failed. TWRP always show me an Error message. My other option was found a Backup and restore it from TWRP, but I only found old backups.
So my main question, can anybody help me to build a TWRP Flashable ZIP from the lastest stock ROM or Allegro Custom ROM? Or can anybody upload your own backup so I can flash it from the microSD?
Please, I really would appreciate your help
P.S: Excuse me for any grammatical or spelling error, I'm not an english native speaker.
4106
llamero said:
At the beginning it stopped charging the battery so I went to technical support and it was fixed, but unfortunately I didn't notice until a week ago, when I was flashing the Stock ROM, that my PC (with Windows 7 x32) doesn't recognize my tablet (via USB). I don't know why, maybe it's software or maybe hardware.
Click to expand...
Click to collapse
I don't know if you are referring to the not-recognized device. I have the same tablet and used pdanet http://forum.xda-developers.com/showthread.php?t=1983470 to get the adb drivers. Hope it helps.
hi, i'm tried to port jb 4.2.2 to my A1000..
it BOOT successfully, but i got serious problem. the touchscreen axes Inverted. i used OTG to connect mouse to use my touchscreen and i found sd card failed to mounting. Please Help me :crying:
Any custom rom
Sir I'm a noob to android development..
I request any expert devs to post a custom rom for lenovo a1000..
There is no hope of receiving updates from lenovo. n
Is there any expert dev out there willing to help eagerly? :angel::laugh:
BSK.Bangali.Babu9188 said:
Sir I'm a noob to android development..
I request any expert devs to post a custom rom for lenovo a1000..
There is no hope of receiving updates from lenovo. n
Is there any expert dev out there willing to help eagerly? :angel::laugh:
Click to expand...
Click to collapse
Hi,, i had some custom rom for A1000 :highfive: but since I'm new on Xda, i can't post it to development thread
If you want it, you can join our group on Facebook : [UNofficial Lounge] Lenovo Ideatab A1000
i posted to this group some custom rom from JB 4.1.2 if you can't understand indonesian language, you can ask on english now i want to make 4.2.2 working but no body help me :crying:
still no body want to help me... :crying:
Elephone P6000
Phone reviews by @s7yler
Stock ROM (SPFlash):
from elephone servers
from needrom.com
Custom Recovery --- Touch RecoveryCourtesy of @bigrammy, @carliv and @Santhosh MVarious
Latin Paradise(拉丁乐园)(Elephone) on Baidu
P6000 Folder
OTA Updates - direct from elephone
--- both are 404 now ---
12282014 to 31012015
01092015 to 31012015
Other threads and useful sites:
http://forum.xda-developers.com/android/general/elephone-p6000-mtk6732-64-bit-4g-5-2g-t2957425
SP Flash Thread - P6000
4pda thread - translated top post is fairly concise
Check your Mobile Network/Carrier
Please use the other threads/Q&A and the thanks button - to minimise duplicate posts reporting the same issues.
I'd like this thread to be used mainly for bug fixes, tips and tricks. If someone reports a similar problem/fix/bug click the thanks button if you'd like to agree.
Bugs
Android 5.0 'Official' Release
Update Official (V3.3)
Some modifications: #186
Android 5.0 Beta
12-02-15 ROM available on needrom.com
Hardware buttons don't work
Battery doesn't draw charge
Ril related memory leak
No ADB
Android 4.4.4 (V8.4)
Notification light - not breathing when charging
OTG only works with self-powered devices
Battery seems to jump from 100% to ~90% Soon after removing from charger
Screen jumps several pixels (30) on slow scrolling. Android 4.4.4 (V8.3) bugs not present in V8.4Data encryption results in a stalled boot/softbrick
FAQ/Fixes
1. Notification light is not working in V8.4 as it was in V8.3
Try Light Manager from the play store or gravity box (xposed module)
2. Does OTG work?
It seems to work only with a powered USB hub - I've only been able to check a powered external hard-drive which wouldn't connect
3. How do you fix the screen jump issue?
There are several options here:
From @the1024 / zOrgent we have two options 1. Using a chinese tool - and 2. Using a .bat
From elephone we have TpUpgrade.apk (appears to only work with V8.4)
From lidmiloff we have P6000 Bugfixer.apk
4. How do you restore a Stock ROM?
Download a SPFlash ROM from #1; you will need to install MediaTek USB VCOM drivers (if they aren't automatically installed); On the download page select the scatter from the ROM folder; and the page should populate with the various .img's and .bins; if it doesn't then double click on the entry and locate it manually (also useful if you wan to change boot/recovery with SPFlash). Hit download; remove the battery from the phone and connect it to the PC (you can connect the battery again). The connection will be fairly instantaneous (there may be a driver install the first time it's connected); if it doesn't connect then unplug/replug.
More details from @bigrammy found here
5. Battery jump from 100% to 90%.
Haven't really noticed this too much - download an app like Battery Monitor Widget, add widget (Battery monitor widget gauge => Content => Central value => Battery => Battery Current (mA)) which will show you the battery drain/draw and charge until the draw is close to; if not +0mA
6. Is there any touch recovery?
As of now (pre-5.0) there is no touch recovery. The recovery thread on #1 contains various recoveries - most of which boot but none have touch - this seems to be a kernel issue.
Touch recoveries can be found here. These are built for KK.
7. What about Custom ROMs?
Potential Port devices (MT6732/MT6752) and their ROMS
As there are no official sources released; for MT6732 or P6000 then custom ROMs are a no-go for now. Porting ROMs from other devices running on MT6732 (and MT6752); i.e. Ulefone Be Pro for example is theoretically possible but there doesn't appear to be any custom ROMs on these chips that offer anything different than the stock/AOSP(almost) that we have already. As other devices get released possibly running MIUI or ColorOS then Custom ROMs may be possible.
FlymeOS
8. How do you take a screenshot?
Natively pressing Volume down and power together for 1 second will take a screenshot - it may take a while to get used to - if volume mixer appears then they were too slow and need to wait for it to disappear. Over adb/terminal you can make use of screencap and screen record
9. How do you back up EVERYTHING(except preloader)?
In SPFlash Tools => readback from 0x00 to 0x3a3e000000
This is a fairly quick way to make sure you have a copy of all the partitions on the device; it will create a 14GB+ file containing all the partitions. You will need to break this block up (manually for the moment) into it's constituent parts if you want to use it to restore - using a Hex-editor (HxD for example) and a copy of the matching /proc/partinfo file and/or scatter.txt
The essential partitions to backup for a fully running device are - boot, (recovery), system, (cache) and data which can all be backed up using a custom recovery. The one other partition needed is nvram - this can be backed up with SPFlash (look at /proc/partinfo) or with dd commands. The nvram partition will only be needed to be restored if you Format All with SPFlash. If you don't have a backup you can restore/recreate the IMEI files that it contains.
10. How do you backup/restore IMEI?
Several options here:
1. MTKDroid
2. Backup NVFLASH partition via readback in SPFlash Tools (look at the scatter.txt) to restore you need to modify the scatter.txt to give the nvflash a file_name: and change it from is_Download: false to is_Download: true
3. From elephone there's a IMEI coding tool
4. Keep a copy of the /data/nvram folder
5. Create new imei files to add to nvram folder/partition with imei.exe
6. Chamelephon app from the play store
7. MTK Engineering Mode
11. Adb access with 5.0 Beta ROMs
1. Use KingoRoot
2. Add the Mediatek subsystem id (0x0e8d) to adb_usb.ini
12. Any Stock Camera fixes?
For KK-4.4.4 from @z0rgent at 4pda
FAQ/Fixes Continued
Android 5.0 V1; V1.1; V2.2 (V3.2); V3.3 #125 #186These versions seem to have gapps preinstalled and are prerooted - for everything else have a look at the 5.0 Betas section below
5.0 Modifications #186Android 5.0 Beta1 Beta2 Beta3
To gain adb access
Linux/Windows - need to add the Mediatek subsystem id (0x0e8d) to adb_usb.ini
Linux: ~/.android/adb_usb.ini
Windows: C:/Users/${Username}/.android/adb_usb.iniKingoRoot It won't root the device however - I believe this is due to it installing a 32bit su binary rather than a 64bit one.
Root
For root install SuperSU v2.11+
Confirmation
Custom Recovery
Recovery from @carliv - from #1; modded to boot on L (basically just the cmdline changed / initrd.gz from stock L recovery replaced with carliv's built CWM).
Carliv Port by hanuma50 on 4pda (hopefully all his work and not partially stolen to take credit)
This recovery seems to only work when the Lollipop Beta ROM is installed.
Gapps
64-bit gapps made for the Nexus 9.
My phone seems to be running a little hot after installing the gapps - but that might just all the cores kicking in.
Mirrored copy of the version I'm using.
(OP's thread has updated them and removed the previous version)
Busybox
64-bit busybox installation
Removing encrypted data (temporarily)
In recovery while in an adb shell: /sbin/make_ext4fs /dev/block/mmcblk0p19
This will allow you to restore backed up data - but it will get re-encrypted on first boot, I'll take a look at removing encryption when I get the chance - should be either secro partition or something in the boot.img
Android 5.0 Beta Breakdown
Screenshots to come later.
Entering LKVOL UP and POWER (this no longer enters recovery)
From lk menu: entering fastboot mode and normal boot works.
Entering recovery (stock) doesn't work and I can't tell if the other normal boot options do anything differentCharging batteryFlashing a custom recovery should allow you some way to charge the batteryI haven't yet been able to install/boot any recovery. Flashing lk and boot from 4.4.4 (I took them from the 48MB OTA) seems to let you charge when powered off. ConfirmedRIL Memory leakThere seems to be a RIL/Sim related memory leak leading to random reboots - for testing purposes disable the sim card(s) or enter airplane mode
I could be wrong about the RIL and the ROM just needed time to settle; all I can say is I had reboots until I switched to airplane modeIMEIIMEI was lost but that would be due to formatted flash memory (wiped nvflash partition) - it's a good idea to keep a backup regardless.Antutu Scores64-bit Antutu Scores are around 28000
32-bit Scores are around 27000
Data-encrypted 4.4.4 Antutu scores are also around 28000SensorsBacklight, sound ... can't be changed
Brightness can be fixed in MTK Engineering Mode #5ROM is not rooted; does not have gapps installed and data is encrypted.
TL;DR The issues with the 5.0 Beta ROM, are primarily not ROM related but kernel related, they have bumped the kernel version up to 3.10.61+, and the issues that need correcting are the various kernel modules (power,sensors).
Android L kernel config
Annotated /system/build.prop
Stripped top of build.prop (build properties) due to size
# begin mediatek build properties
ro.mediatek.version.release=ALPS.KK2.MP13.V1.27
ro.mediatek.platform=MT6752
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=KK2.MP13
ro.mediatek.version.sdk=3
# end mediatek build properties
#
# from out/target/product/k01q_e/obj/CUSTGEN/config/system.prop
#
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=196608
wifi.direct.interface=p2p0
# dalvik.vm.heapgrowthlimit=256m
# dalvik.vm.heapsize=512m
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
# Switching Menu of Mass storage and MTP
ro.sys.usb.storage.type=mtp #### adding ,massstorage to this gives an additional USB option but it apears to still mount as a media device (MTP) adding ,mass_storage will let you mount the microsd card
# USB BICR function
ro.sys.usb.bicr=no #### changing to yes will allow you to mount /system/mobile_toolkit/iAmCdRom.iso to PC via USB ####
# USB Charge only function
ro.sys.usb.charging.only=yes
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.gemini.sim_num=2
ro.gemini.smart_sim_switch=false
ro.gemini.smart_3g_switch=0
ro.gemini.sim_switch_policy=1
ril.specific.sm_cause=0
bgw.current3gband=0
ril.external.md=0
ro.btstack=blueangel
ro.sf.hwrotation=0
ril.current.share_modem=2
curlockscreen=1
ro.mediatek.gemini_support=true
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
persist.radio.fd.on.only.r8.network=0
drm.service.enabled=true
fmradio.driver.enable=1
ril.first.md=1
ril.flightmode.poweroffMD=1
ril.telephony.mode=0
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
persist.mtk.anr.mechanism=1
mediatek.wlan.chip=CONSYS_MT6752
mediatek.wlan.module.postfix=_consys_mt6752
ril.radiooff.poweroffMD=0
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
persist.mtk.wcn.combo.chipid=-1
ter.service.enable=0
mediatek.extmd.usbport=0
ro.lte.dc.support=0
ril.active.md=0
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4.4
ro.com.google.clientidbase=alps-k01q_e-{country}
ro.com.google.clientidbase.ms=alps-k01q_e-{country}
ro.com.google.clientidbase.yt=alps-k01q_e-{country}
ro.com.google.clientidbase.am=alps-k01q_e-{country}
ro.com.google.clientidbase.gmm=alps-k01q_e-{country}
wfd.dummy.enable=1
persist.sys.dalvik.vm.lib=libdvm.so #### Charnging this to libart.so appears to have no effect ####
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# begin fota properties
ro.fota.platform=MTK6732_KK
ro.fota.type=phone
ro.fota.oem=new-bund6732_KK
ro.fota.device=k01q_e
ro.fota.version=eng.jenkins.1422677980
# end fota properties
ro.sf.lcd_density=190
#### Stock value I believe is 320; changing to >190 switches the device to phablet mode; this spoofs the screen size to be 7.73 inches (CPU-Z) enabling tablet apps in the apps store after clearing play store app data ####
qemu.hw.mainkeys=0
#### This enables softkeys ####
Annotated /custom/customprop/custom.prop
ro.product.model=Elephone P6000
ro.product.name=Elephone P6000
ro.product.brand=elephone
ro.product.manufacturer=elephone
ro.bt.name=P6000
ro.wifi.name=P6000
ro.notification.breath=yes #### This seems to not be working with V8.4 ####
ro.build.display.id=ALPS.KK2.MP13.V1.27
ro.internal.build.version=K01Q-E.ELEPHONE.vR83.E4.150109
ro.custom.build.version=Elephone_P6000_V8.4_20150109
ro.fota.device=Elephone_P6000
ro.fota.version=Elephone_P6000_V8.4_20150109202612
MTK Engineering Mode
*#*#3646633#*#* (*#*#ENGMODE#*#*)
What can be done in engineering mode
General non-specific guide
Backlight
Hardware ===> LCM ===> LCM Cycle ===> add a value between 5 and 55 ===> Hit Set.
(On L at least this value will jump to value in the millions/billions; unsure if this has any implications)
Audio
http://forum.xda-developers.com/showthread.php?t=2746861
http://forum.xda-developers.com/showthread.php?t=2248396
GPS
http://www.cnx-software.com/2013/11...ps-lock-on-mediatek-mt65xx-based-smartphones/
Orientation / GSensor
Hardware Testing ===> Sensor ===> Sensor Calibration ===> GSensor Calibration ===> Do Calibration (20% tolerance)
IMEI Restore
Command should be AT +...
Xposed Installer (or WSM Tools)
I've had no problems with any xposed modules.
You will get a warning regarding AliyunOS -
this issue is reported due to the presence of /system/framework/*.jar.jex files.
You can ignore/move/remove these *.jar.jex files without it causing any (noticable) issue.
I haven't decompiled any apps so I don't know if. jex files are used elsewhere within the ROM (in place of .jar),
so can't comment on whether the stock ROM is indeed an Aliyun OS.
I would advise backing them up so that any future OTA can complete 100%.
Any issues identified with xposed modules will be reported here.
Very Helpful and concise
Nice one bro :good:
Subscribed
Ludmiloff's Screen fix apk version 1.2 final now works with 8.3 also. Just wanted to give you a quick update so you edit your post HypoTurtle
greekfragma said:
Ludmiloff's Screen fix apk version 1.2 final now works with 8.3 also. Just wanted to give you a quick update so you edit your post HypoTurtle
Click to expand...
Click to collapse
Still doesn't work for me on 8.3.
Nice one, i get my phone in a couple of weeks.
Hello
and Thanks for all your work ! :victory:
Can you add how save and restore imei ?
xenonism said:
Still doesn't work for me on 8.3.
Click to expand...
Click to collapse
Sorry to hear that man. Can you give more details? Are the driver version letters shown normal or "?"
greekfragma said:
Sorry to hear that man. Can you give more details? Are the driver version letters shown normal or "?"
Click to expand...
Click to collapse
Well, I tried the first methods which came out and they wouldn't work. Then I upgraded to V8.4, at the same time the Elephone APK came out, so I used it and it set the thresholds to 3 and 4. Then I decided to go back to V8.3 and since then, no method managed to make a persistent change to the values (I tried ludmiloff's works, Elephone's APK modified by me, which worked for others, and the old Russian method). At best, I get the new vaules in the "init config" portion of the configuration, never in the "real config" portion, and they are always gone after a reboot. File permissions of /proc/gt9xx_config are 660, owned by root. The config version letter is currently F and ludmiloff's app reads it correctly.
I guess that's all the info I can share.
xenonism said:
Well, I tried the first methods which came out and they wouldn't work. Then I upgraded to V8.4, at the same time the Elephone APK came out, so I used it and it set the thresholds to 3 and 4. Then I decided to go back to V8.3 and since then, no method managed to make a persistent change to the values (I tried ludmiloff's works, Elephone's APK modified by me, which worked for others, and the old Russian method). At best, I get the new vaules in the "init config" portion of the configuration, never in the "real config" portion, and they are always gone after a reboot. File permissions of /proc/gt9xx_config are 660, owned by root. The config version letter is currently F and ludmiloff's app reads it correctly.
I guess that's all the info I can share.
Click to expand...
Click to collapse
Well, time to get in here, I guess...
@xenonism, the best I could tell you is to start over with clean ROM, preferably the one listed at 4pda.ru thread about elephone P6000 (in the head section) and try again. There must be something messed up in your device. I really believe the config is independent of ROM. The secret is very simple, you must start with new version letter and at offset 184 set correct checksum. How to calculate checksum:
//cal checksum
byte checksum;
for(i=0; i<chip_cfg_len; i++) {
checksum += file_config;
}
file_config[chip_cfg_len] = (~checksum) + 1;
Where chip_cfg_len = 184
Then write the checksum and write 0x01 at offset 185.
I believe you already know where are the theshsold values - at offset 16 and 17.
If you wish, I could send you my hand crafted config, which I was an inspiration for my apk.
Good luck
Err... it looks like I am unable to install a clean ROM, or even to update the existing one. I guess I'll have to sort this issue out before I join back the discusssion.
I have a fully functionalV8.3_20141228 ROM running and carliv's CWM from the 7th of February installed. The phone offers me the OTA update and it downloads a ~23 MB update. When I agree to install it, the phone reboots to CWM and the update fails with the following messages:
E:Invalid command argument
Finding update package...
E:unknown volume for path [/storage/sdcard0/adupsfota/update.zip]
E:Can't mount /storage/sdcard0/adupsfota/update.zip
Installation aborted.
Click to expand...
Click to collapse
If I try to install the same update with ROM Manager, it also fails in CWM with the following message:
-- Installing: [FILENAME SHOWS HERE]
Finding update package...
Opening update package...
Installing update...
Installation aborted.
Click to expand...
Click to collapse
But when I reboot the phone, I get the "Android is upgrading...] Screen, saying it's optimizing 124 apps. I believe no actual update takes place, though.
And here's what I'd consider the relevant portion of the recovery.log file:
Preparing to install ROM...
about to run program [/cache/dowipedalvikcache.sh] with 1 args
mount: mounting /dev/block/platform/mtk-msdc.0/by-name/userdata on /data failed: Device or resource busy
mount: mounting /dev/block/platform/mtk-msdc.0/by-name/cache on /cache failed: Device or resource busy
mount: can't find /sd-ext in /etc/fstab
umount: can't umount /sd-ext: Invalid argument
run_program: child exited with status 1
about to run program [/sbin/chmod] with 3 args
about to run program [/tmp/recovery/11-rommanager.sh] with 2 args
mount: mounting /dev/block/platform/mtk-msdc.0/by-name/system on /system failed: Device or resource busy
about to run program [/sbin/umount] with 2 args
Click to expand...
Click to collapse
If I try to install the full 20150109 ROM with ROM Manager, it also fails in CWM, without displaying any meaningful messages in recovery. I also get the "Android is upgrading screen here".
The errors in recovery.log are the same as above.
I guess I could install the full ROM via SP Flash Tool, right?
Also... I have a couple of questions to ask, can I feel free to do it in this thread? Some might be trivial for most.
ludmiloff said:
Well, time to get in here, I guess...
@xenonism, the best I could tell you is to start over with clean ROM, preferably the one listed at 4pda.ru thread about elephone P6000 (in the head section) and try again.
Click to expand...
Click to collapse
@ludmiloff does your app require busybox to be installed?
Downloading from 4pda.ru is a bit hit and miss for me, any chance someone can post the CWMLollipop.img...
Is there any difference in the 4pda.ru ROMs and the ones on needrom.com?
Also found a fix for the backlight in Android L - in engineering mode - not sure if it will do anything useful in 4.4.4 (lower the minimum brightness?).
MTK Engineering Mode => Hardware => LCM => LCM Cycle => value between 5 and 55.
xenonism said:
Err... it looks like I am unable to install a clean ROM, or even to update the existing one. I guess I'll have to sort this issue out before I join back the discusssion.
Click to expand...
Click to collapse
Feel free to elaborate. Edit your previous post with your current setup / what you've tried - so we can turn it into a troubleshooting post.
HypoTurtle said:
Feel free to elaborate. Edit your previous post with your current setup / what you've tried - so we can turn it into a troubleshooting post.
Click to expand...
Click to collapse
Ok, thanks a lot. I will edit my post right now. The thing is... I haven't used an Android phone in 4 years and I did a lot of my tinkering on my P6000 while working or late at night so.. things got a bit messy.
@HypoTurtle,
My app does not require busybox. It simply run some commands in the shell, though.
In fact It is my first experience with android programming and I just followed some examples found here and there. I also wanted to make a Kotlin based app, but then I decided to continue with plain old java. The app might not a perfect one. Hope it worked for many of elephone owners
---------- Post added at 08:05 AM ---------- Previous post was at 07:41 AM ----------
@xenonism, you should try a clean ROM with sp flash tool. It is a bit tricky, I have tried one from needrom and as the author suggested, I did not check the preloader mark. Then my phone ended totally bricked. The ROM from 4pda worked for me. Today I'm going to reflash it again and investigate why my app does not work on it.
@ludmiloff, I ended up installing 20150109 via SP Flash Tool and then updating via OTA to the latest version. Sure enough, your app worked then. And permissions for gt9xx_config are now 666.
I am not particularly happy with the gravitybox solution for the notification issue, so I'm trying to look into it, but I am not really hopeful to achieve something.
xenonism said:
@ludmiloff, I ended up installing 20150109 via SP Flash Tool and then updating via OTA to the latest version. Sure enough, your app worked then. And permissions for gt9xx_config are now 666.
I am not particularly happy with the gravitybox solution for the notification issue, so I'm trying to look into it, but I am not really hopeful to achieve something.
Click to expand...
Click to collapse
Same I did just few minutes ago. Won't install updates and will try to make my app working on this ROM.
BTW. Russian method write a very different format to file /process/gmnodexxxxxxx where xxxxxxx is build date. I'm pretty sure if I could change the file with correct checksum and version letter it should work too.
Anyway, my intent was to fix the scroll after I applied the elephone apk. For sure the Russian method with correct version letter and checksum would work too and it is still the best flow now for phones with very stock ROM. I already explained how to calculate the checksum.
HypoTurtle said:
@ludmiloff does your app require busybox to be installed?
Downloading from 4pda.ru is a bit hit and miss for me, any chance someone can post the CWMLollipop.img..
Click to expand...
Click to collapse
I cant see any CWMLollipop.img there
They only list two recoverys my P6000CWM3.img with no links or credits of course
and carliv's CWM_Modd_2.img again no links or credits
I will be working on the lollipop soon
I am getting another phone very soon to use for daily life so I can use the P6000 for dev only purposes.
Hi guys,
I'm here to explain my new fresh app that I tested on my HTC Desire 310 and it's faboulous. His name is...
MTKTransfROM
*What does it do?
- This app will let you do all the process of porting an MTK ROM to your MTK phone without a PC! You can choose a lot of options and method, like signing ZIP, Fix BootLoop/Stuck at Boot Logo and even READ BOOT.IMG DIRECTLY FROM YOUR PHONE and AUTOMATICALLY ADAPT THE ROM FOR YOUR PARTITION (/dev/block/mmcblk0p*)
*What do I have to do?
-All you have to do is select the ZIP ROM, choose chipset and options and then click "Port ROM for your device!". The default chipsets installed are taken on online forums, like XDA and 4pda.ru (thanks a lot for those guides), but you can build your own chipset method with a simple text editor!
*How can I build my chipset method?
-The chipset structure is like: e.g.
Code:
[B]system/bin/vold [/B] (Copy this file from your device)
[B]system/etc[I]/[/I][/B] (Copy entire directory, replacing existing files)
[B][I]-[/I]system/etc/ [/B] (First delete ROM folder and then copy entire folder)
[B]system/lib/libaudio[I]*[/I][/B] (Copy all files that starts with libaudio...)
Then save it as "{THE NAME YOU WANT}.txt" in your SDCard under "MTKTransfROM" named folder (e.g. /storage/sdcard0/MTKTransfROM/mt6589.txt)
*Bugs?
Existing bugs TODO:
-During porting, the UI lags. Don't worry, the app is working. If appears Not Responding error, just wait.
-For now, it's only in English.
*Changelog
**1.2
- Discarded zip4j for problems during extraction, using java.util.zip now
- Fixed Exception on some ROM structures
- Added Exit menu voice if activity doesn't terminate
**1.0
- Initial Release
*Credit
-Kellinwood for his ZipSigner class. Thanks a lot.
Now I need help from you community...
As you can see from Play Store screenshots, it has the "Port boot.img" function. However I'm searching a method to unpack and repack MTK boot.img directly from phone. If someone can help me, I will be the most happy man in the world!
As for now, it's the only thing I need to let this app became perfect!
Google Play Store URL: Click here to be redirected (If it says 1.0, is because it's updating or uploading, I'm writing this post while this app is updating).
P.S. Sorry for my English, I'm Italian.
Can you add support for MT6752 devices?
You can add it yourself putting your custom files in the folder I explained in the tutorial
RacerOttavio97 said:
You can add it yourself putting your custom files in the folder I explained in the tutorial
Click to expand...
Click to collapse
Thanks, I will try it and see if it works :fingers-crossed:
I was thinking of doing something similar with MT6732/52 devices...
[I'd be doing it from recovery as I have almost zero app making abilities]
Have a look at the MTKsplit file in the MTK folder in my sig. for the boot.img (un)pack - it works fine with the 64bit SoC's boot/recovery images - so not sure about the older ones.
HypoTurtle said:
I was thinking of doing something similar with MT6732/52 devices...
[I'd be doing it from recovery as I have almost zero app making abilities]
Have a look at the MTKsplit file in the MTK folder in my sig. for the boot.img (un)pack - it works fine with the 64bit SoC's boot/recovery images - so not sure about the older ones.
Click to expand...
Click to collapse
Thank you HypoTurtle, but I'm searching a tool that run on android phone itself, like a sh script or a linux binary.
RacerOttavio97 said:
Thank you HypoTurtle, but I'm searching a tool that run on android phone itself, like a sh script or a linux binary.
Click to expand...
Click to collapse
MTKsplit can/does run on android itself - thats why I wrote it. It's a sh - primarily using dd to split the boot/recovery. I removed the #! at the top so the same script can be run fron recovery and system (making it default to the shell that calls it - /sbin/sh in recovery and /system/bin/sh in system).
Just tested the MTKsplit against a 6592 recovery.img and it works fine:
Code:
[email protected]_phone:/tmp # ls -la
ls -la
-rwx------ root root 5867520 2015-10-05 16:22 recovery-6592.img
[email protected]_phone:/tmp # MTKsplit recovery-6592 unpack
MTKsplit recovery-6592 unpack
Unpacking recovery-6592 - will only take 30 seconds
All Done...
Command line: f30"
Ramdisk unpacked to /tmp/work
[email protected]_phone:/tmp # ls -la
ls -la
-rw------- root root 4265472 2015-10-05 16:24 kernel
-rw------- root root 512 2015-10-05 16:23 kernel_header
-rw------- root root 2048 2015-10-05 16:23 mtk_header
-rw------- root root 1598976 2015-10-05 16:24 ramdisk.cpio.gz
-rw------- root root 512 2015-10-05 16:24 ramdisk_header
-rwx------ root root 5867520 2015-10-05 16:22 recovery-6592.img
drwx------ root root 2015-10-05 16:24 work
Android sdk
Is it necessary to be the port rom is the same android sdk level of my mobile stock rom ?!
RacerOttavio97 said:
Hi guys,
I'm here to explain my new fresh app that I tested on my HTC Desire 310 and it's faboulous. His name is...
MTKTransfROM
*What does it do?
- This app will let you do all the process of porting an MTK ROM to your MTK phone without a PC! You can choose a lot of options and method, like signing ZIP, Fix BootLoop/Stuck at Boot Logo and even READ BOOT.IMG DIRECTLY FROM YOUR PHONE and AUTOMATICALLY ADAPT THE ROM FOR YOUR PARTITION (/dev/block/mmcblk0p*)
*What do I have to do?
-All you have to do is select the ZIP ROM, choose chipset and options and then click "Port ROM for your device!". The default chipsets installed are taken on online forums, like XDA and 4pda.ru (thanks a lot for those guides), but you can build your own chipset method with a simple text editor!
*How can I build my chipset method?
-The chipset structure is like: e.g.
Then save it as "{THE NAME YOU WANT}.txt" in your SDCard under "MTKTransfROM" named folder (e.g. /storage/sdcard0/MTKTransfROM/mt6589.txt)
*Bugs?
Existing bugs TODO:
-During porting, the UI lags. Don't worry, the app is working. If appears Not Responding error, just wait.
-For now, it's only in English.
*Changelog
**1.2
- Discarded zip4j for problems during extraction, using java.util.zip now
- Fixed Exception on some ROM structures
- Added Exit menu voice if activity doesn't terminate
**1.0
- Initial Release
*Credit
-Kellinwood for his ZipSigner class. Thanks a lot.
Now I need help from you community...
As you can see from Play Store screenshots, it has the "Port boot.img" function. However I'm searching a method to unpack and repack MTK boot.img directly from phone. If someone can help me, I will be the most happy man in the world!
As for now, it's the only thing I need to let this app became perfect!
Google Play Store URL: Click here to be redirected (If it says 1.0, is because it's updating or uploading, I'm writing this post while this app is updating).
P.S. Sorry for my English, I'm Italian.
Click to expand...
Click to collapse
playstore-item not found
what ca i do..??
link not work
Introduction
You probably know already that starting from Android 5.x (Lollipop) compiled roms (aosp,cm,stock) are not compressed anymore the way they used to be on previous android versions. On previous versions all content inside /system folder that has to be extracted within our device was either uncompressed (simple /system folder inside our flashable zip) or compressed in a system.img file, which it is a ext4 compressed file; both of these, anyway, were readable and we could see all system files (app,framework, etc).
The problem comes in >=5.0 versions, this method is not used anymore. Why? Because roms started to be always larger, so it is necessary to compress them even more.
Note : Introduction was taken from here : https://forum.xda-developers.com/an.../how-to-conver-lollipop-dat-files-to-t2978952 by @xpirt so thanks to him
So in order to save myself and others who most port Custom & Stock Roms, i decided to use some part of my time to write this script for easy work done.
What this script does :
It basically Unpack and Repack system.new.dat alongside with file_context.bin convertion which is seen in android 7.0/7.1
ITS USAGE:
NOTE
First Clone the repo.
Make sure that Android_System_Extraction_and_Repack_Tool is located at Desktop
Run "Xtrakt" from it's location in terminal
Copy "file_contexts.bin" from your Rom to "file_context_zone" folder
Use "f" from menu to convert "file_contexts.bin" to text readable "file_contexts"
Copy : system.new.dat, system.transfer.list & file_contexts to "convert-dat" folder.
Use "i" from menu to unpack, which the output will be name as "rom_system" for modifications of apks & files.
Use "y" from menu to repack, which the complete new "system.new.dat", "system.patch.dat" & "system.transfer.list" will be located at "Finish-new.dat" folder
Done !
EXAMPLE:
Again , Make sure that Android_System_Extraction_and_Repack_Tool is located at Desktop
In your terminal, type the following to start the script:
Code:
git clone https://github.com/iykequame/Android_System_Extraction_and_Repack_Tool.git
mv android_system_extraction_and_repack_tool ~/Desktop/
cd ~/Desktop/android_system_extraction_and_repack_tool/
./Xtrakt
OR
Code:
Double-click the Xtrakt file and choose "Run in Terminal" if your OS supports it.
##ALERT!!!##
sudo is requested in the script.
How To Get It {Tool]
Clone from one of the below ;
From GITHUB :
Code:
git clone https://github.com/iykequame/Android_System_Extractrion_and_Repack_Tool.git
From BITBUCKET :
Code:
git clone https://[email protected]/zac6ix/android_system_extraction_and_repack_tool.git
Or
Download zip
AFH
GIT-RELEASE
Sources :
Android_System_Extraction_and_Repack_Tool
GITHUB
BITBUCKET
Threads :
sdat2img 1.0 - img2sdat 1.2
For file_context.bin conversion by: Pom Kritsada @ MTK THAI Developers.
Credit to :
@xpirt
@SuperR.
-all xda threads which helped
-Android Matrix Development - here
-Nana Yaa for her time.
hi, your tool sounds good but it seems it doesnt work.
i press f and nothing happen ..
Use "f" from menu to convert **"file_contexts.bin"** to text readable **"file_contexts"**
Blackball said:
hi, your tool sounds good but it seems it doesnt work.
i press f and nothing happen ..
Use "f" from menu to convert **"file_contexts.bin"** to text readable **"file_contexts"**
Click to expand...
Click to collapse
Sorry for the Late reply !
Directories linking has been fix .
You can go ahead and try again
Thanks for sharing!
Don't work
When i press i ..Don't work.say file missing.but i already put all file..Please help meView attachment 4249470
Doesn't do anything with file_context.bin, doesn't even check if file is there.
oreo supported???
I am getting this error on repacking:-
Code:
WARNING! WARNING!! WARNING!!!
Please Check & Trace Where Errors.
There Is NO rom_system found
file_contexts -->> Missing !
Android SDK -->> not detected !
Please help.
Black_J said:
I am getting this error on repacking:-
Code:
WARNING! WARNING!! WARNING!!!
Please Check & Trace Where Errors.
There Is NO rom_system found
file_contexts -->> Missing !
Android SDK -->> not detected !
Please help.
Click to expand...
Click to collapse
I see that this thread is not supported.
Anyways, I observed that the tool works for file_contexts.bin but not for other options.
So , I followed the other link in the thread for individual commands and was successful.
Works perfectly on Android Pie! Have to do some tweaks, PM me if anyone wants to make this work for Android Pie.