[ROM][JB 4.2.2★][★DEGRUS™ & Megatron007™★][★DARKSIDE COLOUR OS★]
First OF I WANNA THANKS TO THE DEV OF THESE ROM- DEGRUS
THNX TO ALLOWING ME TO CONTINUE HIS PROJECT
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These Rom Can Be Used In All Clone Devices-
Micromax Canvas A240 / Myphone Iceberg/Wiko Darkside
XDA:DevDB Information
[ROM][JB 4.2.2★][★DEGRUS™ & Megatron007™★][★DARKSIDE COLOUR OS★], ROM for the Micromax Canvas Doodle 2 A240
Contributors
Megatron007
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Mediatek 6589 @ 1.2 Ghz
Version Information
Status: Stable
Created 2014-05-10
Last Updated 2014-05-10
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Scripts & Tweaks
* Very smooth, with no lag
* Absolutely full app in the system, it was not removed anything from the original version
* Extremely stable
* Gapps already installed
* Optimized to the maximum
* Adrenaline Engine
* Loopy Smothness
* Geeky Engine
* Net-Fork
* Supremacy
* VelocityTweaks
* SlaidyBoost
* BeatsAudio
* CosmisTweak LightSpeed
Based on the Latest Official ColorOS Rom from Oppo R819T
----Changelog----
Fixed APN default Settings
Fixed 3G Toggle in Network Settings
Added Bravia Engine
Able to remove Carrier Name even using single Sim
Improved Camera App
Removed HDR Function
Added Extra features on Camera
New ColorOS Firmware
Minimal Gapps added
Features:
ColorOS from Oppo
Complete ColorOS features even with Gesture Controls
Light RAM usage
Very good looking ROM
Zipalign
Init.d support
Pre rooted
Busybox
Deodexed
Better battery management
Code:
1. Download zip file
2. Put into external/internal sd card
3. Go to TWRP Recovery
4. Wipe data/factory reset
5. Flash the rom zip file
8. Reboot your device
What's Dat
All Bugs Fixed
YGPS
COMPASS
CALL LOG
INCOMING CALL
RANDOM REBOOTS
Here
Themes For Colour OS-
Midnight Theme: Here
Flyme 3.0 Theme: Here
DEGRUS(BASSEM KARRAY) [ Thnx Bro ]
Megatron007
Colour OS
Oppo
Micromax
Xda-Developers
Thanks for your efforts....
Nevermind.
Can't download from android, only from desktop (OS X)
***Can't find download link...
Sent from my BLU Life View using XDA Free mobile app
Hello,
I would like to try this rom. but can you please help me.
I tried rooting my MyPhone Agua Iceberg and was successful. However when I updated the SuperSU, the app also ask to update the binary. There's 2 methods: Normal and CWM. When I tried the NORMAL, the binary was not successful so I tried the CWM (I did not install any custom recovery, I am just rooted), so it lead me to the stock recovery. But since I don't know what to do, I just selected, reboot to system.
But after that, all I got was the SYSTEM UI FC so I can't really use the phone.
When I tried to go back to recovery, it showed me the BRICKED sign. I tried to FORCE SHUT DOWN my phone and and booted to phone, It was able to boot to system but I still got the SYSTEM UI FC.
Kindly help what can I do to fix the phone.
Thank you very much
kimezra said:
Hello,
I would like to try this rom. but can you please help me.
I tried rooting my MyPhone Agua Iceberg and was successful. However when I updated the SuperSU, the app also ask to update the binary. There's 2 methods: Normal and CWM. When I tried the NORMAL, the binary was not successful so I tried the CWM (I did not install any custom recovery, I am just rooted), so it lead me to the stock recovery. But since I don't know what to do, I just selected, reboot to system.
But after that, all I got was the SYSTEM UI FC so I can't really use the phone.
When I tried to go back to recovery, it showed me the BRICKED sign. I tried to FORCE SHUT DOWN my phone and and booted to phone, It was able to boot to system but I still got the SYSTEM UI FC.
Kindly help what can I do to fix the phone.
Thank you very much
Click to expand...
Click to collapse
Flash Stock Rom Bro :/ No Other Option
Megatron007 said:
Flash Stock Rom Bro :/ No Other Option
Click to expand...
Click to collapse
I'm so happy there's someone who answered my inquiry. May I know where can I download the Stock ROM and how.
I can't access recovery. So does that mean I have no choice but to use ODIN? But I also don't have any idea how to go to the download mode of MyPhone Agua Iceberg.
Kindly advise.
Thanks
kimezra said:
I'm so happy there's someone who answered my inquiry. May I know where can I download the Stock ROM and how.
I can't access recovery. So does that mean I have no choice but to use ODIN? But I also don't have any idea how to go to the download mode of MyPhone Agua Iceberg.
Kindly advise.
Thanks
Click to expand...
Click to collapse
Stock Rom - http://www.mediafire.com/download/6vp5t9v97e6l9rd/Micromax-A240-S9301-MP-F2F3F5F8-B1-IN-MMX-15-FLASHER-USER.zip
How To Flash The Stock Rom is inside the zip and this is the stock rom for micromax doodle 2 which is the clone of myphone aguaiceberg and i didnt able to found out the stock rom of myphone agua iceberg ..this stockrom will work fine
Megatron007 said:
Stock Rom - http://www.mediafire.com/download/6vp5t9v97e6l9rd/Micromax-A240-S9301-MP-F2F3F5F8-B1-IN-MMX-15-FLASHER-USER.zip
How To Flash The Stock Rom is inside the zip and this is the stock rom for micromax doodle 2 which is the clone of myphone aguaiceberg and i didnt able to found out the stock rom of myphone agua iceberg ..this stockrom will work fine
Click to expand...
Click to collapse
Thanks man. I just finished downloading the file as some time. I will try to do it later after work.
I will update you soon with the outcome.
Appreciate the help and time again.
kimezra said:
Thanks man. I just finished downloading the file as some time. I will try to do it later after work.
I will update you soon with the outcome.
Appreciate the help and time again.
Click to expand...
Click to collapse
Hey Bro,
I tried following the instruction from the file you gave me, however I have difficulty about the SP Tools not recognizing my device. I already installed the drivers and the adb and also rebooted my phone. But after turning off my phone and connecting it via usb to the computer, the SP Tool don't recognize my phone. It shows the charging animation only. I tried following the instruction you press volume up or down, still nothing is happening..
Please advise.
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
Megatron007 said:
Stock Rom - http://www.mediafire.com/download/6vp5t9v97e6l9rd/Micromax-A240-S9301-MP-F2F3F5F8-B1-IN-MMX-15-FLASHER-USER.zip
How To Flash The Stock Rom is inside the zip and this is the stock rom for micromax doodle 2 which is the clone of myphone aguaiceberg and i didnt able to found out the stock rom of myphone agua iceberg ..this stockrom will work fine
Click to expand...
Click to collapse
Hey Bro,
I tried following the instruction from the file you gave me, however I have difficulty about the SP Tools not recognizing my device. I already installed the drivers and the adb and also rebooted my phone. But after turning off my phone and connecting it via usb to the computer, the SP Tool don't recognize my phone. It shows the charging animation only. I tried following the instruction you press volume up or down, still nothing is happening..
Please advise.
kimezra said:
Hey Bro,
I tried following the instruction from the file you gave me, however I have difficulty about the SP Tools not recognizing my device. I already installed the drivers and the adb and also rebooted my phone. But after turning off my phone and connecting it via usb to the computer, the SP Tool don't recognize my phone. It shows the charging animation only. I tried following the instruction you press volume up or down, still nothing is happening..
Please advise.
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
Hey Bro,
I tried following the instruction from the file you gave me, however I have difficulty about the SP Tools not recognizing my device. I already installed the drivers and the adb and also rebooted my phone. But after turning off my phone and connecting it via usb to the computer, the SP Tool don't recognize my phone. It shows the charging animation only. I tried following the instruction you press volume up or down, still nothing is happening..
Please advise.
Click to expand...
Click to collapse
u have to remove the battery and then u have to connect ur it iwll recognize
Megatron007 said:
u have to remove the battery and then u have to connect ur it iwll recognize
Click to expand...
Click to collapse
Yup I read that part but the MyPhone Agua Iceberg has a non-removable battery. Anyway around it?
kimezra said:
Yup I read that part but the MyPhone Agua Iceberg has a non-removable battery. Anyway around it?
Click to expand...
Click to collapse
Oh **** :/ Just Wait
@Megatron007 can you please port discovery ROM from Micromax canvas HD A116 to our canvas doodle 2?
Downloading Error !!!!!
Someone please provide with a working download link because the link provided in this thread says file not found .........
Please dev provide with a working download link
Bhuri25 said:
Someone please provide with a working download link because the link provided in this thread says file not found .........
Please dev provide with a working download link
Click to expand...
Click to collapse
https://mega.co.nz/#!PVF3iY5B!ERw_vWw77w71DCOHS_YkCnF97M-DThKZ4Q8trz1jQ8E
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XOLO Q1100 Root, Recovery, Rom, Development, Kernel, etc
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Images Of Stock ROM:
Install ADB Drivers:
-Use Shuame Or Use Moborobo
Install The Software Shuame or Moborobo
Connect Your device in USB Debugging Mode & With Charging only mode
Shuame will start installing driver and after few moments, you'll notice a app on your phone will get installed.
Further you'll see the Shuame App look-like this
You Are Done With ADB and Phone Drivers.
Anyone who can help us, are most welcomed
Please Don't Spam the threadOfficial Facebook Group
ROOT, RECOVERY:
The RootBoot Script by @A N D Y
CWM Touch Recovery 6.0.3.6 by @A N D Y
CWM Recovery 6.0.3.7 by @tuxboy
TWRP 2.7.0.0 by @tuxboy
CWM Recovery 6.0.4.9 by @A N D Y
PhilZ Touch Recovery v6.84.4 by @A N D Y
TWRP 3.0.0-0 - 7th February 2016 by @A N D Y
ROMs:
[CWM]Stock De-Odexed Firmware by @A N D Y
Unbrick XOLO Q1100 by @Forever Alone
Cyanogenmod 11 WIP by @karthik050782
Ressurrection Remix 5.1.5 by @FaserF
Kernel Source for Developers by Xolo
http://forum.xda-developers.com/showthread.php?t=2668854
Here we are discussing how to root it
And can you confirm fastboot?
Just type adb reboot-bootloader
Sent from my A11 using Tapatalk
provide stock rom
arnabbiswasalsodeep said:
http://forum.xda-developers.com/showthread.php?t=2668854
Here we are discussing how to root it
And can you confirm fastboot?
Just type adb reboot-bootloader
Sent from my A11 using Tapatalk
Click to expand...
Click to collapse
Yess It's Working! Even I tested it
Black Screen appears, and to detect the device.
Type "fastboot devices"
Your device ID will appear
rahul964 said:
provide stock rom
Click to expand...
Click to collapse
Sorry! I made the stock system.img from Xolo Q1100, but can't made a scatter for Qualfast until I get to know about System partitions
I'm trying my best to do it!
Sent from my Xolo Q1100 using Tapatalk Premium
Well have you dumped the system image?
Now we must try to root via fastboot
Can you flash the system image without any problems, i mean is the bootloader unlocked?
Sent from my A11 using Tapatalk
arnabbiswasalsodeep said:
Well have you dumped the system image?
Now we must try to root via fastboot
Can you flash the system image without any problems, i mean is the bootloader unlocked?
Sent from my A11 using Tapatalk
Click to expand...
Click to collapse
Bootloader is unlocked :victory:
I tried adding Supersu, though the limit of system.img flasing is over than that of the size that device accept through fastboot
A N D Y said:
Bootloader is unlocked :victory:
I tried adding Supersu, though the limit of system.img flasing is over than that of the size that device accept through fastboot
Click to expand...
Click to collapse
^^cool
U used unpack repack script?
Can you dump the recovery image and upload it to
builder.clockworkmod.com
And try the image
Later try the touch recovery if the normal works
The recovery can be the option to root as the same as xperia t2 ultra dual
Press thanks :good: I'd helped :highfive:
A N D Y said:
Root Xolo Q1100:
Proof:
Tutorial: XDA-Thread
Click to expand...
Click to collapse
Hey, so method is out to root this phone?
check it here
http://forum.xda-developers.com/showthread.php?p=51483535
Hey Friends,
Any luck for a custom ROM in near future ? or
possibility for stock 4.4.2 ?
sunilnair007 said:
Hey Friends,
Any luck for a custom ROM in near future ? or
possibility for stock 4.4.2 ?
Click to expand...
Click to collapse
Fingers Crossed :fingers-crossed:
But Probably I'm sure there will be Kitkat in near future
Hi friends,
any luck for stock rom (official Q1100 ), i google all over for Chinese version as well.
after trying DPI fixing phone is boot loop, try to factory reset, no luck. now hunting for firmware.
this is worst dependency when we buy Chinese stuff,
if anyone got tutorial to fix , please guide. hope some one is having stock firmware.
awaiting for response
Best wishes
sunilnair007 said:
Hi friends,
any luck for stock rom (official Q1100 ), i google all over for Chinese version as well.
after trying DPI fixing phone is boot loop, try to factory reset, no luck. now hunting for firmware.
this is worst dependency when we buy Chinese stuff,
if anyone got tutorial to fix , please guide. hope some one is having stock firmware.
awaiting for response
Best wishes
Click to expand...
Click to collapse
Yepp! We are trying to get help from XOLO Official's to make people fix there device if any mishappening causes
Happy News guys , Finally Kernel Source code has been released for our Xolo q1100 Officially:
http://sourceforge.net/projects/xolo-mobiles/files/
I am looking for the code for Overclocking
Exclusiveyash said:
Happy News guys , Finally Kernel Source code has been released for our Xolo q1100 Officially:
http://sourceforge.net/projects/xolo-mobiles/files/
Click to expand...
Click to collapse
Yes I have already downloaded the code and working on it for some overclocking.
But I am new to this thread and I don't have a device yet.
So i need some support from you guys to see what can be done.
Interested folks may PM me.
Thanks
Now the development ,will take new steps and as the source has come so we can except the custom kernels with swap,new governors and i/o schedulers.
I compiled the uploaded kernel.. not done any changes.. if anybody know how to flash it by fastboot, then please test it...
https://www.mediafire.com/?ynblill5clw3cx4
I think we can use the device tree of falcon(moto g) to get the kitkat... But first we need a custom recovery...
Sent from my Q1100 using Tapatalk
I flashed it via fastboot no problems what so ever. Just a request please add usb otg support to the kernel and please under clock the processor values as it heats up very quickly.
Sent from my Q1100 using XDA Free mobile app
AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
This is a pure build of AOSP Android 4.4.2 Kitkat, the goal is to have a pure AOSP rom, so it is not the objective of this project to include any functionality that is not native to Android AOSP.
And to make the experience more consistent and simplify some issues related to AndroidKitkat, this ROM has a basic versions of Google Apps (Gapps) pre-installed, additional apps can be installed via Play Store
Hi guys this ROM is Pure AOSP kitkat 4.4.2 for Lenovo A369i.
This Rom is for firmware (build number) s110 only (go to Settings>about device>bulid number to check your firmware. Check out the screenshot in the bottom of the post )
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM
* Before flashing it! YOU are choosing to make these modifications.
* If you point the finger at me for messing up your device, I will laugh at you.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Follow Instructions correctly
How To Install
*Download ROM, Recovery from the links given below
*Take backup of your ROM.
*Download given ROM and put it in the sd card.
*Download the given Custom TWRP recovery ( Other recoveries dont work Work) and flash it.(you can use flashify, MTK Mobile Uncle Tools etc)
*Reboot To recovery
* Wipe Data
*Wipe Cache
*Wipe Dalvik
*Flash the ROM using the given latest TWRP .
*Reboot
*Enjoy
Download Links
*ROM
*Custom TWRP
Don't forget to Hit thanks
Thanks
*mtkroms
*XDA developers
*AOSP
*TWRP team
And numerous other developers
So what are you waiting for flash the ROM and enjoy Kitkat and hit thanks
Also Checkout CM12.1 Cyanogenmod For Lenovo A369I
This Rom is for firmware (build number) s110 only
XDA:DevDB Information
[ROM][4.4.2][UNOFFICIAL][PORT][MT6572] AOSP KITKAT FOR LENOVO A369i, ROM for all devices (see above for details)
Contributors
karthikkarthik
ROM OS Version: 4.4.x KitKat
Based On: AOSP
Version Information
Status: Stable
Created 2016-05-25
Last Updated 2020-10-16
Is the kernel usable to port a lollipop ROM ?
Sent from my SM-N9005 using Tapatalk
AkmalWarrior said:
Is the kernel usable to port a lollipop ROM ?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
There is alredy Lollipop ROM CM12.1 For Lenovo A369i
I am tring to port CM13 marshmellow. hit thanks if helped.
You can Try to port it to another ROMs. but dont forget to give proper credits.
Do I need to port or will it work as it is?
afnanmughal said:
Do I need to port or will it work as it is?
Click to expand...
Click to collapse
Just flash as it is .
Sent from my SM-N9005 using Tapatalk
afnanmughal said:
Do I need to port or will it work as it is?
Click to expand...
Click to collapse
If you are using Lenovo A369I, you dont need to port it. you can just install it. But if you are using other mt6572 devices, then you should port it to your device.
karthikkarthik said:
If you are using Lenovo A369I, you dont need to port it. you can just install it. But if you are using other mt6572 devices, then you should port it to your device.
Click to expand...
Click to collapse
My Lenovo A369i was running s111 firmware and now it is running Lollifox 1.10 that I ported myself. Do I need to port this ROM because it's for s110?
afnanmughal said:
My Lenovo A369i was running s111 firmware and now it is running Lollifox 1.10 that I ported myself. Do I need to port this ROM because it's for s110?
Click to expand...
Click to collapse
Yes. This ROM is only for RowS110 try to port it or try to flash RowS110 first. I recommend to flash Row S110 You can Find It Here
For Instructions on flashing Stockrom RowS110 Check here
Also this is real kitkat and not themed fake Rom like like lollifox . so enjoy real kitkat ROM
You can also find Lollipop Cm12.1 For A369i
how run row 108? please!
It's getting stuck at boot logo any solution please!
jinkaidz2 said:
how run row 108? please!
Click to expand...
Click to collapse
It is only for s110. update to s110 and try flashing
a369i said:
It's getting stuck at boot logo any solution please!
Click to expand...
Click to collapse
What is your stock ROM version?. This ROM is for s110 only. Try flashing s110 first and reflash the kitkat ROM
how to fix my recovery ? When I went into recovery mode using twrp I downloaded the screen went abnormal for a few seconds then return to normal . After that I could not touch the screen. Help
ejvc1996 said:
how to fix my recovery ? When I went into recovery mode using twrp I downloaded the screen went abnormal for a few seconds then return to normal . After that I could not touch the screen. Help
Click to expand...
Click to collapse
Flash the given recovery using flashfire or mtk mobile uncle tools or flashify. No other recovery works.
karthikkarthik said:
Flash the given recovery using flashfire or mtk mobile uncle tools or flashify. No other recovery works.
Click to expand...
Click to collapse
I already flashed the given recovery using mtk mobile uncle and nothing happened. I mean the same problem, i cant touch any options in twrp.
ejvc1996 said:
I already flashed the given recovery using mtk mobile uncle and nothing happened. I mean the same problem, i cant touch any options in twrp.
Click to expand...
Click to collapse
What ROM were you using?
hi.. i just downloaded the kitkat rom and twrp recovery. but after flashing your twrp using mtk mobile uncle/flashify/etc (ive already tried different apps) and then reboot to recovery, the touchscreen is not working.
I also tried to flash lower version of twrp (TWRP v2.6..) that is working for lenovo a369i, and flashed your kitkat rom, the phone will boot up to the idle screen but touchscreen is not working too.
do you have any solution for this? thanks in advance.
Btw. i m using build s110 already from stock rom.
ShianIrish said:
hi.. i just downloaded the kitkat rom and twrp recovery. but after flashing your twrp using mtk mobile uncle/flashify/etc (ive already tried different apps) and then reboot to recovery, the touchscreen is not working.
I also tried to flash lower version of twrp (TWRP v2.6..) that is working for lenovo a369i, and flashed your kitkat rom, the phone will boot up to the idle screen but touchscreen is not working too.
do you have any solution for this? thanks in advance.
Btw. i m using build s110 already from stock rom.
Click to expand...
Click to collapse
What is not working? Rom or recovery?
karthikkarthik said:
What ROM were you using?
Click to expand...
Click to collapse
Stock rom. Row 110
---------- Post added at 09:27 AM ---------- Previous post was at 09:25 AM ----------
karthikkarthik said:
What is not working? Rom or recovery?
Click to expand...
Click to collapse
I think we've the same problem.
karthikkarthik said:
What is not working? Rom or recovery?
Click to expand...
Click to collapse
When i flashed TWRP custom recovery from this tutorial, when rebooting to recovery, the screen becomes blurry for a few seconds then reboots to the twrp recovery, but the touchscreen is not working so still cant use that to flash the kitkat rom..
since the twrp custom recovery from here is not working, i tried to use other recovery, but then when i thought ive flashed the kitkat rom successfully (which is not), the recovery says the rom was flash successfully but then again in rebooting, the screen became blurry again for a few seconds until the idle screen / lock screen of kitkat appears, but then again touchscreen is not working..
so i really cant determine what im doing wrong, im pretty sure im following instruction here carefully..
BTW, my phone was build S201 at first, but the tutorial said its only for build S110 so i downgraded my phone and then followed everything in this tutorial.
Thanks for the reply, i thought no one is active right now.. been waiting for days but still i really thank you..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself
About
MIUI which stands for Mi User Interface and pronounced "Me You I", a play on the common abbreviation of the words user interface as UI, developed by Xiaomi Tech, is a stock and aftermarket firmware for smartphones and tablet computers based on the Google Android operating system. MIUI includes various features such as theming support.
MIUI 9 is one of the most advance OS.
MIUI 9 - F E A T U R E S
Lightning fast system
Explosively fast app launch time
Dynamic resource allocation by prioritise the in-use App for fluent experience!
Universal search: Powerful search engine that can differentiate your image by typing in keywords, including your conversations.
Two steps for all the vital information: Copy and receive info!
Image Search
New Image Editing Software
New Animations Across Whole UI
Home screen customizations.
Notification Filter.
Lock Screen Shortcuts
Comtrols and Gestures Support
New Messaging Interface
Silent DND Mode
One Tap Login
Instant App
Fixed 99 % Charging Bug.
Revamped and Simplified 50+ Features
Note [I M P O R T A N T]:
-After installing rom wait some time to becoming Rom stable
-This is 32 BIT ROM.
-You have to install GAPPS separately.
-This ROM is ported from Redmi 2 prime.
-Rom take some time on 1st boot
Bugs
No Bugs At All :laugh:
99 % Battery Bug Is Also Fixed.
Download Links In Second Post.
Screenshots In third Post.
Flashing Process [To be followed strictly] :
Go to TWRP
Wipe cache / dalvik cache / data / system.
Then MIUI FOR YUPHORIA BY PawanRockz.zip
It might show error 7 on first try, don't panic flash ROM again without wiping anything.
Wipe Cache and dalvic cache.
Reboot.
Install ARM 5.1.1 GAPPS and Enjoy, Cheers !!
ROM Information
ROM Developer:- PawanRockz
ROM OS Version:-5.1.1 Lollipop
ROM Kernel:-Linux 3.10.x
ROM Firmware Required:- 5.1.1 Lollipop
Based On:- MIUI V9
Sources
Kernel source: https://github.com/YUPlayGodDev/android_kernel_cyanogen_msm8916/tree/lp-5.1
Version Information
Status: Stable
Donate Me : Scan This Barcode With PayTM !!http://u01.appmifile.com/images/2017/05/26/3a07a1eb-e270-4db0-84df-f31f0d70a889.jpg
Credits:
YU Team
MIUI PRO
Xiaomi.EU Team
Xiaomi Team
Me - PawanRockz
Don't forget to hit that Thanks Button. Its free and means a lot.
Download Links
PRESS THE THANKS BUTTON AND PROCEED FOR DOWNLOAD
~~~ M I U I 9 GLOBAL BETA FOR YU5010 ~~~
MIUI 9 For YU5010 BY PawanRockz
Install ARM 5.1.1 GAPPs From opengapps , cheers.
Screenshots
HIT THE THANKS BUTTON AND PROCEED.
Gapps-32bit or 64bit?? And if am using android 7.1 will it flash ?reply soon
susheelyadav said:
Click to expand...
Click to collapse
Flash ARM 32 BIT 5.1.1 GAPPs
Does it support video over Lte?
jazzthe#1 said:
Does it support video over Lte?
Click to expand...
Click to collapse
Dont know. I don't have Jio sim now
I dont have yuphoria right now but hard bricked it...and the cost for reviving it around 4k according to service centre...so i bought RN4 2mnths ago...but i always believe on some devs who can keep alive yu phones...pawan is one of them...grat work buddy.keep it up.
imsouvik said:
I dont have yuphoria right now but hard bricked it...and the cost for reviving it around 4k according to service centre...so i bought RN4 2mnths ago...but i always believe on some devs who can keep alive yu phones...pawan is one of them...grat work buddy.keep it up.
Click to expand...
Click to collapse
Thanks for the support
Does this support Yuphoria 5010A?
Riyas22 said:
Does this support Yuphoria 5010A?
Click to expand...
Click to collapse
Ya
Kernel
Thanks for the reply. May I know which kernel I have to use? I would be grateful if you reply with a link.
Riyas22 said:
Thanks for the reply. May I know which kernel I have to use? I would be grateful if you reply with a link.
Click to expand...
Click to collapse
It will boot with stock kernel. Just flash ROM with the procedure mentioned in op
Thank you
Last one, it is mandatory to unlock bootloader? Or I can just simply flash the ROM and gapps in stock recovery?
Hi i just flashed my yu5010a with the new rom but the first boot is still stuck since half n hour should i redo the procedure or wait ..
dr ankur said:
hi i just flashed my yu5010a with the new rom but the first boot is still stuck since half n hour should i redo the procedure or wait ..
Click to expand...
Click to collapse
i reflashed it n it worked thanx
Hey I updated the weekly uodate, after the update finished in recovery mode, my mobile won't turning on, I removed battery and try to turn on, I tried to go into recovery mode, but nothing is working, please assist @PawanRockz
Riyas22 said:
Hey I updated the weekly uodate, after the update finished in recovery mode, my mobile won't turning on, I removed battery and try to turn on, I tried to go into recovery mode, but nothing is working, please assist @PawanRockz
Click to expand...
Click to collapse
Your phone is hard bricked by updating miui through updater app. Search on Google how to recover hard bricked Yuphoria through SD card method.
Hard bricked
PawanRockz said:
Your phone is hard bricked by updating miui through updater app. Search on Google how to recover hard bricked Yuphoria through SD card method.
Click to expand...
Click to collapse
Yea I searched in Google bro, but I can't files related to Yuphoria stock android version. Is there any other way than using memory card? I'm reading on QFIL tool, is this possible to flash using this tool for Yuphoria? I read this method with yureka. Please assist.
I flashed it on my yu yuphoria but the home button and the recents buttons are not working what should I do??? Plz help...
---------- Post added at 09:39 AM ---------- Previous post was at 08:59 AM ----------
Plz help @PawanRockz bro...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my first time sharing on XDA but I have been in a lot of forums since I was in High School. Now, I am working as a Technical Support Specialist in an American based company and still have the passion of helping and sharing.
But, please do note that I am not a developer.
Now, I know you guys are looking for a most stable, smooth performance with great power management ROM. I think you will love this ROM as much as I do.
So, so much for the intro, here it is. Special thanks to Herman Koeman for this great ROM. The battery lasts a day from 100 %. I can play Heroes Evolved, Mobile Legends smoothly on Low Graphics settings. Compared to other ROMs I have tried (RR, DND, AOKP, AOSP, CynogenMOD, etc), including stock ROM, these games are a bit lag.
I am telling based on my experience. We may have different experiences, so please do understand.
ROM Author: Herman Koeman
ROM Information:
Based on KitKat ( Android 4.4.4 ). Ported from K3/K30T
Supports English & Chinese Language Only
Gapps Included
Pre-Rooted
Maxx AUDIO
Dolby Atmos
Bloatware Removed
Permission Manager ( Disable app from running at start-up and more! )
Expanded Developer Options
Deodexed
NEW Theme Center
NEW Lenovo Splash Screen
NEW Settings UI Look and Functions ( Vibe UI 2.5 )
NEW Lenovo Security App
NEW Lenovo Music App
Average RAM available 450 - 580MB. First boot - 500MB+
And a lot more!
Bugs: NOTHING AT ALL.
To avoid any unexpected circumstances, please follow the instructions correctly. If you are still experiencing a bug, feel free to post.
Requirements:
Your should be on KitKat. If you are on Lollipop or higher, flasth stock KitKat first.
If you need help, see my guide on 4th post.
Note: Do not use any firmware base switcher. You may brick your phone. If not, you will encounter problems with the ROM.
TWRP Recovery ( KitKat Version 2.8.6.1 ) Installed
NEW_VIBE_UI_LENOVO_A6000_V2.0 ROM
Download:
Code:
https://drive.google.com/uc?id=18wPgIjZfdXWF4H0qiiY55p6oRj9F5SL2&export=download
For Mobile users, download here.
Disclaimer: Do at your own risk!
Code:
The information in this post is true and tested to the best of our knowledge.
All recommendations are made without guarantee on the part of the Author and yours truly.
I and the Author disclaim any liability in connection with the use of this ROM.
We are not responsible to whatever happens on your phone.
However, we are here to help.
Instructions:
Copy ROM to your SD Card
Boot into TWRP Recovery ( KitKat Version 2.8.6.1 )
Make a back-up. Backup > Check System, Boot, and Data. ( This is important. If you don't like the ROM, you can switch back to your old system using this back-up )
P.S: If your BACK-UP is KitKat based, you can switch back right away. However, if your BACK-UP is Lollipop based or higher, you will need to install the stock Lollipop ROM first before restoring the back-up or else you will HARD BRICK your phone.
Wipe > Advance Wipe. Check Data, Dalvik, System, and Cache. Swipe to wipe.
Install NEW_VIBE_UI_LENOVO_A6000_V2.0.zip
Reboot (The first boot may take longer. Be patient)
Credits all goes to the creator of this ROM, Herman Koeman a.k.a Mr. Chan of
Code:
http://android4stores.blogspot.com
Also, thanks to TeamWin and all the people who made this ROM possible.
Feel free to ask for any help. However, I can't promise that I will be able to help all of your concerns. My knowledge and resources are limited.
Screenshots will be posted on the second post.
To optimize the ROM, see the THIRD POST.
XDAevDB Information
VibeUI, ROM for the Lenovo A6000/Plus, K30-T
ROM OS Version: 4.4.4
ROM Kernel: Linux 3.10.28
Version Information
Status: Stable
Posted on 2017-12-06
Last Updated on 2017-12-06
These screenshots are taken by yours truly. I am using this ROM until now (present) and I love it.
Optimizing the ROM.
To change the device name, follow this guide:
Open ROOT Explorer app ( Pre-installed )
Navigate to System folder
Long tap Build.prop and open with Text Editor
Look for these tags and rename them to Lenovo A6000 or A6000 Plus or to any name you want.
ro.product.model=
ro.lenovo.series=
ro.product.ota.model=
ro.lenovo.ram= - You can change this to 2GB if you are using A6000+
ro.lenovo.rom= - You can change this to 16GB if you are using A6000+
Note: Do not touch the other lines which are not indicated here.
Press the three dot buttons on the top-right side, Save and Exit.
Reboot your phone.
Renaming in a computer.
If you connect your phone to a computer and named as Lenovo K30-T, you can rename it by changing your USB connection to MTP and then go to My Computer > Right Click your phone and click Rename.
Changing the default minimum CPU Frequency.
The default CPU governor is Interactive with minimum CPU Frequency to 800000. To change the default minimum CPU Frequency, follow this guide
Open ROOT Explorer App.
Browse to System folder.
Open Build.prop via Text Editor.
Find this ro.min_freq=800000 - Change 800000 to 200000 or 400000 or 533333.
Save and Exit.
To prevent apps from running at Startup, follow the guide below.
Open SafeCenter app.
Go to Permissions.
Under Behavior, browse to the bottom and look for Auto-start.
Toggle to allow and reject any app listed.
Note:Make sure you have given Power Manager root access in SuperSU.
Going back to KitKat from Lollipop or higher version of Android
To go back to KitKat from Nougat, Marshmallow, Lollipop or Oreo, you can either use Lenovo Downloader or Qualcomm Flash Image Loader (QPST) via computer or you can choose and follow my guide for an easier procedure.
Instructions:
First download the stock KitKat ROM from here:
Code:
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S042_151012_WC29.zip
Download TWRP 2.8.6.1 from here:
Code:
https://drive.google.com/file/d/1dS0V8JHOvqAfDRDdAKZPHzIt004fikMq/
Copy them on your SD Card.
Boot to recovery and flash Stock KitKat BUT don't reboot system after flash.
Install recovery by image. Tap on Install > Install Image and locate the TWRP-2.8.6.1.img and flash it.
After that, go to Reboot > Recovery.
You will now have a new TWRP Recovery. Make a full wipe by following my instructions on the first post and proceed with the installation of the ROM.
Special Thanks: SevenMars/TeamWin for the recovery
xda_borj said:
RESERVED
Click to expand...
Click to collapse
Im on Nougat ROM Dot Os
Can I flash this ROM ??
If not then how can I flash this ROM !!!
Plss explain
What about the MB??
how much Mb this ROM is???
xda borj i see u in many forums for large time helping people to their problem and this time u present rom THIS IS SUCH A GREAT THING,but i wanna ask u some question i m on dot os give guide for installing this from dot os ,keep up that goodwork ,thank u ,sorry for bad english
Link not working buddy
jameeljb6 said:
Im on Nougat ROM Dot Os
Can I flash this ROM ??
If not then how can I flash this ROM !!!
Plss explain
What about the MB??
how much Mb this ROM is???
Click to expand...
Click to collapse
Birbal00 said:
xda borj i see u in many forums for large time helping people to their problem and this time u present rom THIS IS SUCH A GREAT THING,but i wanna ask u some question i m on dot os give guide for installing this from dot os ,keep up that goodwork ,thank u ,sorry for bad english
Click to expand...
Click to collapse
Thank you for your positive and warm feedbacks. I really appreciate them.
In order to install this ROM. You must first install/flash the stock KitKat.
To do that, check the fourth post. I made a guide for you guys.
@jameeljb6 if you are referring to the zip file size of the ROM, you can simply check it by visiting the download link I gave on the first post.
rajgabbar said:
Link not working buddy
Click to expand...
Click to collapse
Link is working, bro. I just checked it.
Revamped!
I respect ur feeling bro but still cant believe that u came to choose the stock vibe kitkat version 4.4 at the end. I am sorry. I love to enjoy noughat and oreo on my device.
defy_owner said:
I respect ur feeling bro but still cant believe that u came to choose the stock vibe kitkat version 4.4 at the end. I am sorry. I love to enjoy noughat and oreo on my device.
Click to expand...
Click to collapse
You do not need to feel sorry. We use our device based on how we want them to. Based on our usage and enjoyment. In my case, KitKat is the best suited version for our device. I can play 3D Games, Social Media, Surf the Web, Play Videos Online without any lag and I can do it 5-8 hours straight on screen.
On top of that, this ROM is modified. You can see the screenshot. It's way better design (UI) from the stock VIBE KitKat.
Otherwise, we have different perspectives and purposes. You can choose your desired ROM in your phone. You can do whatever you want to and use it to however you wanted to.
I am just sharing this ROM to everyone who got the same usage and basis as mine.
Thanks for the comment!
Download link of TWRP 2.8.6.1 by SevenMars is now open to anyone. You are free to download now without asking for permission.
good work broo...
xda_borj said:
Download link of TWRP 2.8.6.1 by SevenMars is now open to anyone. You are free to download now without asking for permission.
Click to expand...
Click to collapse
while trying to flash stock rom from present recovery it is showing error 7.
what to do bro. can you explain more briefly
bro after reboot network connection is not working i'm try every thing but result will be same...
---------- Post added at 07:31 PM ---------- Previous post was at 06:35 PM ----------
Bro u will have any idea how to increased call Volume becoz call Volume is less in this rom...
if u have than plz tell me..
Any one please do an video on YouTube about how to flash this ROM
And send the YouTube link
Pls
I can't understand what was given in description...
---------- Post added at 03:09 PM ---------- Previous post was at 03:07 PM ----------
I'm on nought right now with twrp 2.8....
Can I flash this ROM directly???
By clearing system,cache, data,etc??
ChaRun6 said:
while trying to flash stock rom from present recovery it is showing error 7.
what to do bro. can you explain more briefly
Click to expand...
Click to collapse
What version of recovery are you using? Did you tried flashing QFIL(QPST) or lenovo downloader? Otherwise, in your recovery, go to Mount > Uncheck "System" and flash the stock rom. If you are still having error, let me know.
D TheThWr said:
bro after reboot network connection is not working i'm try every thing but result will be same...
---------- Post added at 07:31 PM ---------- Previous post was at 06:35 PM ----------
Bro u will have any idea how to increased call Volume becoz call Volume is less in this rom...
if u have than plz tell me..
Click to expand...
Click to collapse
Bro everything is working even on my first flash. Did you follow my instructions correctly? Try activating Dolby.
jameeljb6 said:
Any one please do an video on YouTube about how to flash this ROM
And send the YouTube link
Pls
I can't understand what was given in description...
---------- Post added at 03:09 PM ---------- Previous post was at 03:07 PM ----------
I'm on nought right now with twrp 2.8....
Can I flash this ROM directly???
By clearing system,cache, data,etc??
Click to expand...
Click to collapse
I am sorry but I can't make a video due to some circumstances.
- Can I flash this ROM directly from Nougat?
No. You will hard brick your phone. As what I have said, flash the stock KitKat rom first.
Good work...fine work but. but media server problem ??
Mahaadev1717 said:
Good work...fine work but. but media server problem ??
Click to expand...
Click to collapse
There is no problem with Media Server.
I am..having error
When i flash any rom
I got error
Unable to mount cache,data,system
I tried every twrp n flash stock rom via pc
Bt still stuck on reccovery showing that error m on lollipop base
Custom Stock Rom For Micromax Q402 Plus
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Click to expand...
Click to collapse
Cautions
*Read the ROM installation instructions correctly
*Press the 'Thank you' button instead of saying it will keep me motivated to do more
Here is the following Feature of this Rom
*360 ROM UI*
*Deodex rom with latest smali & backsmali2.3.4*
*Heavily Deobloted*
*Prerooted with magisk
* Preinstalled*Busybox
Click to expand...
Click to collapse
Requirements
Unlocked Bootloader [url]https://forum.xda-developers.com/android/general/bootloader-unlock-root-twrp-mmx-q402-t3918122[/URL]
Patched Boot (for dm-verity ,force-encrypt)
TWRP Recovery [url]https://mega.nz/#!DlYlTaiC!38AOJurHSEIl8Vt4jf-e9Nle7irQXJAaFtDjjZHUKCI[/URL]
CTR/CWM RECOVERY https://mega.nz/#!j9oC0AJK!BInozliM_2Uiy4rT2A9RLcoLo5-l9WVfSAjdc1sm7lQ
Patience
Working Brain:laugh:
Rom link https://mega.nz/file/SwIExShT#8UvxNfh1I9zVSPJB2QnVk7uibBqIEQmWaKYTa_zNhhg
for latest version visit here https://www.youtube.com/channel/UClYZWypNtVrAan7L1BbsP4g?view_as=subscriber
Installation Steps
Download ROM Zip and put it to external or internal sdcard
Boot into TWRP Recovery Or CTR/CWM Recovery
Wipe/Format - Dalvike, cache, Data and System
Install Rom Zip
Reboot and enjoy
Credits
topjohanwu For magisk
SuperR's For his kitchen
osm0sis For his AIK tool and busybox
shankar Its me
sorry if i forgot someone
Bugs currently NO
I have succefully ported Qmobile Rom to MMX Q402+ CG SKY
Bug - default video call not send but you can recive
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Uploaded on my other thread
I have found some bugs....
1. Battery detection issue, telling wrong battery percentage and drain so fast
2. App install issue, app not getting install from anywhere even Google play
Kishorpatel2689 said:
1. Battery detection issue, telling wrong battery percentage and drain so fast
2. App install issue, app not getting install from anywhere even Google play
Click to expand...
Click to collapse
Try replacing healthd from boot.IMG ramdisk folder of stock to port
I haven't faces such issue . it's working so smoothly without any problem. Might be a battery issue. Screen brightness causes more battery drain and also see if WiFi and gps are on in background .
It's consume less ram than stock cg sky rom . you can try vulmax universal app and choose battery mode and see if draining fast or something change
Can you port miui for cg sky micromax q402 plus
Brother i request, can you please port miui for micromax q402 plus cg sky
---------- Post added at 11:37 AM ---------- Previous post was at 11:26 AM ----------
shankar1790 said:
I haven't faces such issue . it's working so smoothly without any problem. Might be a battery issue. Screen brightness causes more battery drain and also see if WiFi and gps are on in background .
It's consume less ram than stock cg sky rom . you can try vulmax universal app and choose battery mode and see if draining fast or something change
Click to expand...
Click to collapse
I checked all, wifi gps and all other things all is disabled but problem is still apear, i checked with 3-5 different battery, but results is same, battery drain 100%to 70% in a minute, and when I going to install any app its stuck in installing dialog
Kishorpatel2689 said:
Brother i request, can you please port miui for micromax q402 plus cg sky
---------- Post added at 11:37 AM ---------- Previous post was at 11:26 AM ----------
I checked all, wifi gps and all other things all is disabled but problem is still apear, i checked with 3-5 different battery, but results is same, battery drain 100%to 70% in a minute, and when I going to install any app its stuck in installing dialog
Click to expand...
Click to collapse
Miui rom and fly me os rom can be ported only by patchrom method .because there is no mi device with spreadtrum sc9832 cpu.
Fly me os is there for sc9832e 64bit cpu (so unlucky) which is impossible to boot for sc9832a 32bit (I already contacted senior devs)
You can try 360 UI ROM Instead of this ROM. this ROM has only two bugs fm and gps(still search for fix).
I found only two ported ROMs infocusA2 and qmobile (360os) works better for me
I m currently stopped porting for personal issue.
But working to bring htc sense UI to mmx q402+ in free time .
Kishorpatel2689 said:
Brother i request, can you please port miui for micromax q402 plus cg sky
Click to expand...
Click to collapse
Hi bro porting miui and flyme os to mmx q402+ currently not possible because patchrom (from source )method available only for marshmallow version and this device is running nougt os .(but lollipop kernel)
Update - version 1.1 is in testing phase.
Fully Deodex with latest smali and back smalli
No more fc
Rotation bug fixed
Added some htc sense ui ported apps
Added some apps from evercross u6 (testing )
VoLTE need to be tested
You can dirty flash rom and then just factory reset in TWRP
What is dirty flash rom? I don't know anything about it
Kishorpatel2689 said:
What is dirty flash rom? I don't know anything about it
Click to expand...
Click to collapse
Dirty flash means flash without formating system data and cache partition.
UPDATE
VoLTE FIXED
GPS Fixed
AutoRotation Fixed
Apps Install Issue Fixed - Need reboot once after setup and play store update
Deodexed
Updated Theme Engine - Now you can download new themes , Wallpaper and ringtones (just update apps in play store)
Screenshot - Comping soon
LINK - Updated
default calendar app removed (dueto fc) -download google calender from play store
Kishorpatel2689 said:
1. Battery detection issue, telling wrong battery percentage and drain so fast
2. App install issue, app not getting install from anywhere even Google play
Click to expand...
Click to collapse
All Bug fixed
for app install issue you need to reboot once after compliting setup and after updating play store
Kishorpatel2689 said:
1. Battery detection issue, telling wrong battery percentage and drain so fast
2. App install issue, app not getting install from anywhere even Google play
Click to expand...
Click to collapse
Try new ROM vs 1.3 .let me know if battery issue is fixed or not
Kishorpatel2689 said:
Brother i request, can you please port miui for micromax q402 plus cg sky
it can be themed like MIUI .we only need some miui apps (like launcher and other apps), some libs and system ui & setting (need to decompile both apk )tweak of current rom. like framwork.jar editing framwork-res.apk editing( i will try)
well 360 os is a forked of miui) . we need sytem.img of any
Click to expand...
Click to collapse
can I flash this rom on xolo era 1X sc9832a chipset. will It work
mani156 said:
can I flash this rom on xolo era 1X sc9832a chipset. will It work
Click to expand...
Click to collapse
not this rom because its required nougat base. i know your kernel and specifixation are same but it will not boot.
if you want or need i will port 360 os ROM (same ui like this ) for you.
reply soon
i will make ROM between 3 days.Need firmware (of course ,your and donor phone)
I will wait for your reply.
btw what's your current os stock rom or custom.
Thanks for your reply. please port 360 rom for my mobile. My mobile running on stock marshmallow 6.0 build s107.
mani156 said:
Thanks for your reply. please port 360 rom for my mobile. My mobile running on stock marshmallow 6.0 build s107.
Click to expand...
Click to collapse
ok. do you have your firmware link?.
or i will try available link on net. i will port 360 f5 device rom for you.
since my daily data limit is 1.5 gb i will download it tomorrow and port and upload rom ,may be on sunday.
be patients.
mani156 said:
Thanks for your reply. please port 360 rom for my mobile. My mobile running on stock marshmallow 6.0 build s107.
Click to expand...
Click to collapse
one importand question -did you unlocked your bootloader and twrp/cwm recovery installed?
mani156 said:
Thanks for your reply. please port 360 rom for my mobile. My mobile running on stock marshmallow 6.0 build s107.
Click to expand...
Click to collapse
well i can't find 360 f5 firmware on net but i will port IDOS ROM 6.0 from advan s5e 5059.